From e7a9a5bbaa78e92e6b76bdb51d4c4f6da35c0812 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 16 Apr 2015 15:43:40 -0700 Subject: tps6507x.txt: Remove executable permission Documention text files shouldn't be executable. Signed-off-by: Joe Perches Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/mfd/tps6507x.txt | 0 1 file changed, 0 insertions(+), 0 deletions(-) mode change 100755 => 100644 Documentation/devicetree/bindings/mfd/tps6507x.txt (limited to 'Documentation/devicetree/bindings') diff --git a/Documentation/devicetree/bindings/mfd/tps6507x.txt b/Documentation/devicetree/bindings/mfd/tps6507x.txt old mode 100755 new mode 100644 -- cgit v1.2.3 From 72d942e23cdab62fba0337403db218dcc9973494 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Fri, 12 Jun 2015 17:44:07 +0200 Subject: of: Add vendor prefix for Zodiac Inflight Innovations Signed-off-by: Andrew Lunn Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree/bindings') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 80339192c93e..c400c95abc67 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -211,3 +211,4 @@ xillybus Xillybus Ltd. xlnx Xilinx zyxel ZyXEL Communications Corp. zarlink Zarlink Semiconductor +zii Zodiac Inflight Innovations -- cgit v1.2.3 From 0b34c1a489f6f018c4fbfbd12657acaa0b4f4ca9 Mon Sep 17 00:00:00 2001 From: Thomas Langer Date: Thu, 18 Jun 2015 18:19:02 +0000 Subject: Documentation: DT: Fix a typo in the filename "lantiq,-pinumx.txt" To fix it, use the chance to rename according the compatible string, which is "lantiq,pinctrl-falcon" and "lantiq,pinctrl-xway" Signed-off-by: Thomas Langer Cc: John Crispin Signed-off-by: Rob Herring --- .../bindings/pinctrl/lantiq,falcon-pinumx.txt | 83 ------------------ .../bindings/pinctrl/lantiq,pinctrl-falcon.txt | 83 ++++++++++++++++++ .../bindings/pinctrl/lantiq,pinctrl-xway.txt | 97 ++++++++++++++++++++++ .../bindings/pinctrl/lantiq,xway-pinumx.txt | 97 ---------------------- 4 files changed, 180 insertions(+), 180 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-falcon.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt delete mode 100644 Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt (limited to 'Documentation/devicetree/bindings') diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt deleted file mode 100644 index ac4da9fe07bd..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt +++ /dev/null @@ -1,83 +0,0 @@ -Lantiq FALCON pinmux controller - -Required properties: -- compatible: "lantiq,pinctrl-falcon" -- reg: Should contain the physical address and length of the gpio/pinmux - register range - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Lantiq's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those group(s), and two pin configuration parameters: -pull-up and open-drain - -The name of each subnode is not important as long as it is unique; all subnodes -should be enumerated and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - -We support 2 types of nodes. - -Definition of mux function groups: - -Required subnode-properties: -- lantiq,groups : An array of strings. Each string contains the name of a group. - Valid values for these names are listed below. -- lantiq,function: A string containing the name of the function to mux to the - group. Valid values for function names are listed below. - -Valid values for group and function names: - - mux groups: - por, ntr, ntr8k, hrst, mdio, bootled, asc0, spi, spi cs0, spi cs1, i2c, - jtag, slic, pcm, asc1 - - functions: - rst, ntr, mdio, led, asc, spi, i2c, jtag, slic, pcm - - -Definition of pin configurations: - -Required subnode-properties: -- lantiq,pins : An array of strings. Each string contains the name of a pin. - Valid values for these names are listed below. - -Optional subnode-properties: -- lantiq,pull: Integer, representing the pull-down/up to apply to the pin. - 0: none, 1: down -- lantiq,drive-current: Boolean, enables drive-current -- lantiq,slew-rate: Boolean, enables slew-rate - -Example: - pinmux0 { - compatible = "lantiq,pinctrl-falcon"; - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - asc0 { - lantiq,groups = "asc0"; - lantiq,function = "asc"; - }; - ntr { - lantiq,groups = "ntr8k"; - lantiq,function = "ntr"; - }; - i2c { - lantiq,groups = "i2c"; - lantiq,function = "i2c"; - }; - hrst { - lantiq,groups = "hrst"; - lantiq,function = "rst"; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-falcon.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-falcon.txt new file mode 100644 index 000000000000..ac4da9fe07bd --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-falcon.txt @@ -0,0 +1,83 @@ +Lantiq FALCON pinmux controller + +Required properties: +- compatible: "lantiq,pinctrl-falcon" +- reg: Should contain the physical address and length of the gpio/pinmux + register range + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Lantiq's pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those group(s), and two pin configuration parameters: +pull-up and open-drain + +The name of each subnode is not important as long as it is unique; all subnodes +should be enumerated and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + +We support 2 types of nodes. + +Definition of mux function groups: + +Required subnode-properties: +- lantiq,groups : An array of strings. Each string contains the name of a group. + Valid values for these names are listed below. +- lantiq,function: A string containing the name of the function to mux to the + group. Valid values for function names are listed below. + +Valid values for group and function names: + + mux groups: + por, ntr, ntr8k, hrst, mdio, bootled, asc0, spi, spi cs0, spi cs1, i2c, + jtag, slic, pcm, asc1 + + functions: + rst, ntr, mdio, led, asc, spi, i2c, jtag, slic, pcm + + +Definition of pin configurations: + +Required subnode-properties: +- lantiq,pins : An array of strings. Each string contains the name of a pin. + Valid values for these names are listed below. + +Optional subnode-properties: +- lantiq,pull: Integer, representing the pull-down/up to apply to the pin. + 0: none, 1: down +- lantiq,drive-current: Boolean, enables drive-current +- lantiq,slew-rate: Boolean, enables slew-rate + +Example: + pinmux0 { + compatible = "lantiq,pinctrl-falcon"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + asc0 { + lantiq,groups = "asc0"; + lantiq,function = "asc"; + }; + ntr { + lantiq,groups = "ntr8k"; + lantiq,function = "ntr"; + }; + i2c { + lantiq,groups = "i2c"; + lantiq,function = "i2c"; + }; + hrst { + lantiq,groups = "hrst"; + lantiq,function = "rst"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt new file mode 100644 index 000000000000..e89b4677567d --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt @@ -0,0 +1,97 @@ +Lantiq XWAY pinmux controller + +Required properties: +- compatible: "lantiq,pinctrl-xway" or "lantiq,pinctrl-xr9" +- reg: Should contain the physical address and length of the gpio/pinmux + register range + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Lantiq's pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those group(s), and two pin configuration parameters: +pull-up and open-drain + +The name of each subnode is not important as long as it is unique; all subnodes +should be enumerated and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + +We support 2 types of nodes. + +Definition of mux function groups: + +Required subnode-properties: +- lantiq,groups : An array of strings. Each string contains the name of a group. + Valid values for these names are listed below. +- lantiq,function: A string containing the name of the function to mux to the + group. Valid values for function names are listed below. + +Valid values for group and function names: + + mux groups: + exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1, + ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3, + spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi , gpt1, gpt2, + gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2, + req3 + + additional mux groups (XR9 only): + mdio, nand rdy, nand rd, exin3, exin4, gnt4, req4 + + functions: + spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio + + + +Definition of pin configurations: + +Required subnode-properties: +- lantiq,pins : An array of strings. Each string contains the name of a pin. + Valid values for these names are listed below. + +Optional subnode-properties: +- lantiq,pull: Integer, representing the pull-down/up to apply to the pin. + 0: none, 1: down, 2: up. +- lantiq,open-drain: Boolean, enables open-drain on the defined pin. + +Valid values for XWAY pin names: + Pinconf pins can be referenced via the names io0-io31. + +Valid values for XR9 pin names: + Pinconf pins can be referenced via the names io0-io55. + +Example: + gpio: pinmux@E100B10 { + compatible = "lantiq,pinctrl-xway"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + #gpio-cells = <2>; + gpio-controller; + reg = <0xE100B10 0xA0>; + + state_default: pinmux { + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + }; + pci { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + }; + conf_out { + lantiq,pins = "io4", "io5", "io6"; /* stp */ + lantiq,open-drain; + lantiq,pull = <0>; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt deleted file mode 100644 index e89b4677567d..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt +++ /dev/null @@ -1,97 +0,0 @@ -Lantiq XWAY pinmux controller - -Required properties: -- compatible: "lantiq,pinctrl-xway" or "lantiq,pinctrl-xr9" -- reg: Should contain the physical address and length of the gpio/pinmux - register range - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Lantiq's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those group(s), and two pin configuration parameters: -pull-up and open-drain - -The name of each subnode is not important as long as it is unique; all subnodes -should be enumerated and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - -We support 2 types of nodes. - -Definition of mux function groups: - -Required subnode-properties: -- lantiq,groups : An array of strings. Each string contains the name of a group. - Valid values for these names are listed below. -- lantiq,function: A string containing the name of the function to mux to the - group. Valid values for function names are listed below. - -Valid values for group and function names: - - mux groups: - exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1, - ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3, - spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi , gpt1, gpt2, - gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2, - req3 - - additional mux groups (XR9 only): - mdio, nand rdy, nand rd, exin3, exin4, gnt4, req4 - - functions: - spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio - - - -Definition of pin configurations: - -Required subnode-properties: -- lantiq,pins : An array of strings. Each string contains the name of a pin. - Valid values for these names are listed below. - -Optional subnode-properties: -- lantiq,pull: Integer, representing the pull-down/up to apply to the pin. - 0: none, 1: down, 2: up. -- lantiq,open-drain: Boolean, enables open-drain on the defined pin. - -Valid values for XWAY pin names: - Pinconf pins can be referenced via the names io0-io31. - -Valid values for XR9 pin names: - Pinconf pins can be referenced via the names io0-io55. - -Example: - gpio: pinmux@E100B10 { - compatible = "lantiq,pinctrl-xway"; - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - #gpio-cells = <2>; - gpio-controller; - reg = <0xE100B10 0xA0>; - - state_default: pinmux { - stp { - lantiq,groups = "stp"; - lantiq,function = "stp"; - }; - pci { - lantiq,groups = "gnt1"; - lantiq,function = "pci"; - }; - conf_out { - lantiq,pins = "io4", "io5", "io6"; /* stp */ - lantiq,open-drain; - lantiq,pull = <0>; - }; - }; - }; - -- cgit v1.2.3