From 0eba387973f521e57f00584e5e840e5328a61dda Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 12 Mar 2013 13:24:25 +0200 Subject: usb: phy: nop: Add device tree support and binding information The PHY clock, clock rate, VCC regulator and RESET regulator can now be provided via device tree. Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi --- .../devicetree/bindings/usb/usb-nop-xceiv.txt | 34 ++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt new file mode 100644 index 000000000000..d7e272671c7e --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt @@ -0,0 +1,34 @@ +USB NOP PHY + +Required properties: +- compatible: should be usb-nop-xceiv + +Optional properties: +- clocks: phandle to the PHY clock. Use as per Documentation/devicetree + /bindings/clock/clock-bindings.txt + This property is required if clock-frequency is specified. + +- clock-names: Should be "main_clk" + +- clock-frequency: the clock frequency (in Hz) that the PHY clock must + be configured to. + +- vcc-supply: phandle to the regulator that provides RESET to the PHY. + +- reset-supply: phandle to the regulator that provides power to the PHY. + +Example: + + hsusb1_phy { + compatible = "usb-nop-xceiv"; + clock-frequency = <19200000>; + clocks = <&osc 0>; + clock-names = "main_clk"; + vcc-supply = <&hsusb1_vcc_regulator>; + reset-supply = <&hsusb1_reset_regulator>; + }; + +hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator +and expects that clock to be configured to 19.2MHz by the NOP PHY driver. +hsusb1_vcc_regulator provides power to the PHY and hsusb1_reset_regulator +controls RESET. -- cgit v1.2.3 From e36a0c870f7dbbfa7ed13cd83b79be00bcd00380 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Tue, 26 Feb 2013 20:03:27 +0530 Subject: usb: dwc3: omap: minor fixes to get dt working Includes few minor fixes in dwc3-omap like populating the compatible string in a correct way, extracting the utmi-mode property properly and changing the index of get_irq since irq of core is removed from hwmod entry. Also updated the documentation with dwc3-omap device tree binding information. Signed-off-by: Kishon Vijay Abraham I [ balbi@ti.com : fix a compile warning introduced by this commit ] Signed-off-by: Felipe Balbi --- Documentation/devicetree/bindings/usb/omap-usb.txt | 28 ++++++++++++++ drivers/usb/dwc3/dwc3-omap.c | 45 ++++++++++------------ 2 files changed, 49 insertions(+), 24 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 1ef0ce71f8fa..1b9f55fd96c0 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -41,6 +41,34 @@ Board specific device node entry power = <50>; }; +OMAP DWC3 GLUE + - compatible : Should be "ti,dwc3" + - ti,hwmods : Should be "usb_otg_ss" + - reg : Address and length of the register set for the device. + - interrupts : The irq number of this device that is used to interrupt the + MPU + - #address-cells, #size-cells : Must be present if the device has sub-nodes + - utmi-mode : controls the source of UTMI/PIPE status for VBUS and OTG ID. + It should be set to "1" for HW mode and "2" for SW mode. + - ranges: the child address space are mapped 1:1 onto the parent address space + +Sub-nodes: +The dwc3 core should be added as subnode to omap dwc3 glue. +- dwc3 : + The binding details of dwc3 can be found in: + Documentation/devicetree/bindings/usb/dwc3.txt + +omap_dwc3 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss"; + reg = <0x4a020000 0x1ff>; + interrupts = <0 93 4>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; +}; + OMAP CONTROL USB Required properties: diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index afa05e3c9cf4..e1206b419932 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -316,11 +316,11 @@ static int dwc3_omap_probe(struct platform_device *pdev) struct resource *res; struct device *dev = &pdev->dev; - int size; int ret = -ENOMEM; int irq; - const u32 *utmi_mode; + int utmi_mode = 0; + u32 reg; void __iomem *base; @@ -334,13 +334,13 @@ static int dwc3_omap_probe(struct platform_device *pdev) platform_set_drvdata(pdev, omap); - irq = platform_get_irq(pdev, 1); + irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(dev, "missing IRQ resource\n"); return -EINVAL; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "missing memory base resource\n"); return -EINVAL; @@ -387,25 +387,22 @@ static int dwc3_omap_probe(struct platform_device *pdev) reg = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS); - utmi_mode = of_get_property(node, "utmi-mode", &size); - if (utmi_mode && size == sizeof(*utmi_mode)) { - reg |= *utmi_mode; - } else { - if (!pdata) { - dev_dbg(dev, "missing platform data\n"); - } else { - switch (pdata->utmi_mode) { - case DWC3_OMAP_UTMI_MODE_SW: - reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE; - break; - case DWC3_OMAP_UTMI_MODE_HW: - reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE; - break; - default: - dev_dbg(dev, "UNKNOWN utmi mode %d\n", - pdata->utmi_mode); - } - } + if (node) + of_property_read_u32(node, "utmi-mode", &utmi_mode); + else if (pdata) + utmi_mode = pdata->utmi_mode; + else + dev_dbg(dev, "missing platform data\n"); + + switch (utmi_mode) { + case DWC3_OMAP_UTMI_MODE_SW: + reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE; + break; + case DWC3_OMAP_UTMI_MODE_HW: + reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE; + break; + default: + dev_dbg(dev, "UNKNOWN utmi mode %d\n", utmi_mode); } dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg); @@ -465,7 +462,7 @@ static int dwc3_omap_remove(struct platform_device *pdev) static const struct of_device_id of_dwc3_match[] = { { - "ti,dwc3", + .compatible = "ti,dwc3" }, { }, }; -- cgit v1.2.3 From dc2377d0b0a298ec9d7d232c0d757f462dedcca2 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Thu, 14 Mar 2013 15:59:10 +0530 Subject: usb: phy: samsung: Common out the generic stuff Moving register and structure definitions to header file, and keeping the generic functions to be used across multiple PHYs in common phy helper driver under SAMSUNG_USBPHY, and moving USB 2.0 PHY driver under SAMSUNG_USB2PHY. Also allowing samsung PHY drivers be built as modules. Signed-off-by: Vivek Gautam Acked-by: Kukjin Kim Signed-off-by: Felipe Balbi --- .../devicetree/bindings/usb/samsung-usbphy.txt | 22 +- drivers/usb/phy/Kconfig | 15 +- drivers/usb/phy/Makefile | 1 + drivers/usb/phy/phy-samsung-usb.c | 726 +-------------------- drivers/usb/phy/phy-samsung-usb.h | 247 +++++++ drivers/usb/phy/phy-samsung-usb2.c | 509 +++++++++++++++ 6 files changed, 800 insertions(+), 720 deletions(-) create mode 100644 drivers/usb/phy/phy-samsung-usb.h create mode 100644 drivers/usb/phy/phy-samsung-usb2.c (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt index 033194934f64..96940abe9a57 100644 --- a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt @@ -1,20 +1,25 @@ -* Samsung's usb phy transceiver +SAMSUNG USB-PHY controllers -The Samsung's phy transceiver is used for controlling usb phy for -s3c-hsotg as well as ehci-s5p and ohci-exynos usb controllers -across Samsung SOCs. +** Samsung's usb 2.0 phy transceiver + +The Samsung's usb 2.0 phy transceiver is used for controlling +usb 2.0 phy for s3c-hsotg as well as ehci-s5p and ohci-exynos +usb controllers across Samsung SOCs. TODO: Adding the PHY binding with controller(s) according to the under developement generic PHY driver. Required properties: Exynos4210: -- compatible : should be "samsung,exynos4210-usbphy" +- compatible : should be "samsung,exynos4210-usb2phy" - reg : base physical address of the phy registers and length of memory mapped region. +- clocks: Clock IDs array as required by the controller. +- clock-names: names of clock correseponding IDs clock property as requested + by the controller driver. Exynos5250: -- compatible : should be "samsung,exynos5250-usbphy" +- compatible : should be "samsung,exynos5250-usb2phy" - reg : base physical address of the phy registers and length of memory mapped region. @@ -44,10 +49,13 @@ Example: usbphy@125B0000 { #address-cells = <1>; #size-cells = <1>; - compatible = "samsung,exynos4210-usbphy"; + compatible = "samsung,exynos4210-usb2phy"; reg = <0x125B0000 0x100>; ranges; + clocks = <&clock 2>, <&clock 305>; + clock-names = "xusbxti", "otg"; + usbphy-sys { /* USB device and host PHY_CONTROL registers */ reg = <0x10020704 0x8>; diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 97de6de9b4b9..e8cd52ac5c05 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -86,11 +86,18 @@ config OMAP_USB3 on/off the PHY. config SAMSUNG_USBPHY - bool "Samsung USB PHY controller Driver" - depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS + tristate "Samsung USB PHY Driver" help - Enable this to support Samsung USB phy controller for samsung - SoCs. + Enable this to support Samsung USB phy helper driver for Samsung SoCs. + This driver provides common interface to interact, for Samsung USB 2.0 PHY + driver and later for Samsung USB 3.0 PHY driver. + +config SAMSUNG_USB2PHY + tristate "Samsung USB 2.0 PHY controller Driver" + select SAMSUNG_USBPHY + help + Enable this to support Samsung USB 2.0 (High Speed) PHY controller + driver for Samsung SoCs. config TWL4030_USB tristate "TWL4030 USB Transceiver Driver" diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index 5fb4a5d55945..8cd355f051f6 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o obj-$(CONFIG_OMAP_USB3) += phy-omap-usb3.o obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o +obj-$(CONFIG_SAMSUNG_USB2PHY) += phy-samsung-usb2.o obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o obj-$(CONFIG_TWL6030_USB) += phy-twl6030-usb.o obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o diff --git a/drivers/usb/phy/phy-samsung-usb.c b/drivers/usb/phy/phy-samsung-usb.c index 967101ec15fd..7b118ee5f5e4 100644 --- a/drivers/usb/phy/phy-samsung-usb.c +++ b/drivers/usb/phy/phy-samsung-usb.c @@ -1,12 +1,13 @@ -/* linux/drivers/usb/phy/samsung-usbphy.c +/* linux/drivers/usb/phy/phy-samsung-usb.c * * Copyright (c) 2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * * Author: Praveen Paneri * - * Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and - * OHCI-EXYNOS controllers. + * Samsung USB-PHY helper driver with common function calls; + * interacts with Samsung USB 2.0 PHY controller driver and later + * with Samsung USB 3.0 PHY driver. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -21,233 +22,16 @@ #include #include #include -#include #include #include #include #include #include -#include #include -#include -/* Register definitions */ +#include "phy-samsung-usb.h" -#define SAMSUNG_PHYPWR (0x00) - -#define PHYPWR_NORMAL_MASK (0x19 << 0) -#define PHYPWR_OTG_DISABLE (0x1 << 4) -#define PHYPWR_ANALOG_POWERDOWN (0x1 << 3) -#define PHYPWR_FORCE_SUSPEND (0x1 << 1) -/* For Exynos4 */ -#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0) -#define PHYPWR_SLEEP_PHY0 (0x1 << 5) - -#define SAMSUNG_PHYCLK (0x04) - -#define PHYCLK_MODE_USB11 (0x1 << 6) -#define PHYCLK_EXT_OSC (0x1 << 5) -#define PHYCLK_COMMON_ON_N (0x1 << 4) -#define PHYCLK_ID_PULL (0x1 << 2) -#define PHYCLK_CLKSEL_MASK (0x3 << 0) -#define PHYCLK_CLKSEL_48M (0x0 << 0) -#define PHYCLK_CLKSEL_12M (0x2 << 0) -#define PHYCLK_CLKSEL_24M (0x3 << 0) - -#define SAMSUNG_RSTCON (0x08) - -#define RSTCON_PHYLINK_SWRST (0x1 << 2) -#define RSTCON_HLINK_SWRST (0x1 << 1) -#define RSTCON_SWRST (0x1 << 0) - -/* EXYNOS5 */ -#define EXYNOS5_PHY_HOST_CTRL0 (0x00) - -#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31) - -#define HOST_CTRL0_REFCLKSEL_MASK (0x3 << 19) -#define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19) -#define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19) -#define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19) - -#define HOST_CTRL0_FSEL_MASK (0x7 << 16) -#define HOST_CTRL0_FSEL(_x) ((_x) << 16) - -#define FSEL_CLKSEL_50M (0x7) -#define FSEL_CLKSEL_24M (0x5) -#define FSEL_CLKSEL_20M (0x4) -#define FSEL_CLKSEL_19200K (0x3) -#define FSEL_CLKSEL_12M (0x2) -#define FSEL_CLKSEL_10M (0x1) -#define FSEL_CLKSEL_9600K (0x0) - -#define HOST_CTRL0_TESTBURNIN (0x1 << 11) -#define HOST_CTRL0_RETENABLE (0x1 << 10) -#define HOST_CTRL0_COMMONON_N (0x1 << 9) -#define HOST_CTRL0_SIDDQ (0x1 << 6) -#define HOST_CTRL0_FORCESLEEP (0x1 << 5) -#define HOST_CTRL0_FORCESUSPEND (0x1 << 4) -#define HOST_CTRL0_WORDINTERFACE (0x1 << 3) -#define HOST_CTRL0_UTMISWRST (0x1 << 2) -#define HOST_CTRL0_LINKSWRST (0x1 << 1) -#define HOST_CTRL0_PHYSWRST (0x1 << 0) - -#define EXYNOS5_PHY_HOST_TUNE0 (0x04) - -#define EXYNOS5_PHY_HSIC_CTRL1 (0x10) - -#define EXYNOS5_PHY_HSIC_TUNE1 (0x14) - -#define EXYNOS5_PHY_HSIC_CTRL2 (0x20) - -#define EXYNOS5_PHY_HSIC_TUNE2 (0x24) - -#define HSIC_CTRL_REFCLKSEL_MASK (0x3 << 23) -#define HSIC_CTRL_REFCLKSEL (0x2 << 23) - -#define HSIC_CTRL_REFCLKDIV_MASK (0x7f << 16) -#define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16) -#define HSIC_CTRL_REFCLKDIV_12 (0x24 << 16) -#define HSIC_CTRL_REFCLKDIV_15 (0x1c << 16) -#define HSIC_CTRL_REFCLKDIV_16 (0x1a << 16) -#define HSIC_CTRL_REFCLKDIV_19_2 (0x15 << 16) -#define HSIC_CTRL_REFCLKDIV_20 (0x14 << 16) - -#define HSIC_CTRL_SIDDQ (0x1 << 6) -#define HSIC_CTRL_FORCESLEEP (0x1 << 5) -#define HSIC_CTRL_FORCESUSPEND (0x1 << 4) -#define HSIC_CTRL_WORDINTERFACE (0x1 << 3) -#define HSIC_CTRL_UTMISWRST (0x1 << 2) -#define HSIC_CTRL_PHYSWRST (0x1 << 0) - -#define EXYNOS5_PHY_HOST_EHCICTRL (0x30) - -#define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29) -#define HOST_EHCICTRL_ENAINCR4 (0x1 << 28) -#define HOST_EHCICTRL_ENAINCR8 (0x1 << 27) -#define HOST_EHCICTRL_ENAINCR16 (0x1 << 26) - -#define EXYNOS5_PHY_HOST_OHCICTRL (0x34) - -#define HOST_OHCICTRL_SUSPLGCY (0x1 << 3) -#define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2) -#define HOST_OHCICTRL_CNTSEL (0x1 << 1) -#define HOST_OHCICTRL_CLKCKTRST (0x1 << 0) - -#define EXYNOS5_PHY_OTG_SYS (0x38) - -#define OTG_SYS_PHYLINK_SWRESET (0x1 << 14) -#define OTG_SYS_LINKSWRST_UOTG (0x1 << 13) -#define OTG_SYS_PHY0_SWRST (0x1 << 12) - -#define OTG_SYS_REFCLKSEL_MASK (0x3 << 9) -#define OTG_SYS_REFCLKSEL_XTAL (0x0 << 9) -#define OTG_SYS_REFCLKSEL_EXTL (0x1 << 9) -#define OTG_SYS_REFCLKSEL_CLKCORE (0x2 << 9) - -#define OTG_SYS_IDPULLUP_UOTG (0x1 << 8) -#define OTG_SYS_COMMON_ON (0x1 << 7) - -#define OTG_SYS_FSEL_MASK (0x7 << 4) -#define OTG_SYS_FSEL(_x) ((_x) << 4) - -#define OTG_SYS_FORCESLEEP (0x1 << 3) -#define OTG_SYS_OTGDISABLE (0x1 << 2) -#define OTG_SYS_SIDDQ_UOTG (0x1 << 1) -#define OTG_SYS_FORCESUSPEND (0x1 << 0) - -#define EXYNOS5_PHY_OTG_TUNE (0x40) - -#ifndef MHZ -#define MHZ (1000*1000) -#endif - -#ifndef KHZ -#define KHZ (1000) -#endif - -#define EXYNOS_USBHOST_PHY_CTRL_OFFSET (0x4) -#define S3C64XX_USBPHY_ENABLE (0x1 << 16) -#define EXYNOS_USBPHY_ENABLE (0x1 << 0) -#define EXYNOS_USB20PHY_CFG_HOST_LINK (0x1 << 0) - -enum samsung_cpu_type { - TYPE_S3C64XX, - TYPE_EXYNOS4210, - TYPE_EXYNOS5250, -}; - -/* - * struct samsung_usbphy_drvdata - driver data for various SoC variants - * @cpu_type: machine identifier - * @devphy_en_mask: device phy enable mask for PHY CONTROL register - * @hostphy_en_mask: host phy enable mask for PHY CONTROL register - * @devphy_reg_offset: offset to DEVICE PHY CONTROL register from - * mapped address of system controller. - * @hostphy_reg_offset: offset to HOST PHY CONTROL register from - * mapped address of system controller. - * - * Here we have a separate mask for device type phy. - * Having different masks for host and device type phy helps - * in setting independent masks in case of SoCs like S5PV210, - * in which PHY0 and PHY1 enable bits belong to same register - * placed at position 0 and 1 respectively. - * Although for newer SoCs like exynos these bits belong to - * different registers altogether placed at position 0. - */ -struct samsung_usbphy_drvdata { - int cpu_type; - int devphy_en_mask; - int hostphy_en_mask; - u32 devphy_reg_offset; - u32 hostphy_reg_offset; -}; - -/* - * struct samsung_usbphy - transceiver driver state - * @phy: transceiver structure - * @plat: platform data - * @dev: The parent device supplied to the probe function - * @clk: usb phy clock - * @regs: usb phy controller registers memory base - * @pmuregs: USB device PHY_CONTROL register memory base - * @sysreg: USB2.0 PHY_CFG register memory base - * @ref_clk_freq: reference clock frequency selection - * @drv_data: driver data available for different SoCs - * @phy_type: Samsung SoCs specific phy types: #HOST - * #DEVICE - * @phy_usage: usage count for phy - * @lock: lock for phy operations - */ -struct samsung_usbphy { - struct usb_phy phy; - struct samsung_usbphy_data *plat; - struct device *dev; - struct clk *clk; - void __iomem *regs; - void __iomem *pmuregs; - void __iomem *sysreg; - int ref_clk_freq; - const struct samsung_usbphy_drvdata *drv_data; - enum samsung_usb_phy_type phy_type; - atomic_t phy_usage; - spinlock_t lock; -}; - -#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy) - -int samsung_usbphy_set_host(struct usb_otg *otg, struct usb_bus *host) -{ - if (!otg) - return -ENODEV; - - if (!otg->host) - otg->host = host; - - return 0; -} - -static int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy) +int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy) { struct device_node *usbphy_sys; @@ -282,13 +66,14 @@ err0: of_node_put(usbphy_sys); return -ENXIO; } +EXPORT_SYMBOL_GPL(samsung_usbphy_parse_dt); /* * Set isolation here for phy. * Here 'on = true' would mean USB PHY block is isolated, hence * de-activated and vice-versa. */ -static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on) +void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on) { void __iomem *reg = NULL; u32 reg_val; @@ -336,11 +121,12 @@ static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on) writel(reg_val, reg); } +EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation); /* * Configure the mode of working of usb-phy here: HOST/DEVICE. */ -static void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy) +void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy) { u32 reg; @@ -358,13 +144,14 @@ static void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy) writel(reg, sphy->sysreg); } +EXPORT_SYMBOL_GPL(samsung_usbphy_cfg_sel); /* * PHYs are different for USB Device and USB Host. * This make sure that correct PHY type is selected before * any operation on PHY. */ -static int samsung_usbphy_set_type(struct usb_phy *phy, +int samsung_usbphy_set_type(struct usb_phy *phy, enum samsung_usb_phy_type phy_type) { struct samsung_usbphy *sphy = phy_to_sphy(phy); @@ -373,11 +160,12 @@ static int samsung_usbphy_set_type(struct usb_phy *phy, return 0; } +EXPORT_SYMBOL_GPL(samsung_usbphy_set_type); /* * Returns reference clock frequency selection value */ -static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy) +int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy) { struct clk *ref_clk; int refclk_freq = 0; @@ -387,9 +175,9 @@ static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy) * external crystal clock XXTI */ if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) - ref_clk = clk_get(sphy->dev, "ext_xtal"); + ref_clk = devm_clk_get(sphy->dev, "ext_xtal"); else - ref_clk = clk_get(sphy->dev, "xusbxti"); + ref_clk = devm_clk_get(sphy->dev, "xusbxti"); if (IS_ERR(ref_clk)) { dev_err(sphy->dev, "Failed to get reference clock\n"); return PTR_ERR(ref_clk); @@ -445,484 +233,4 @@ static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy) return refclk_freq; } - -static bool exynos5_phyhost_is_on(void *regs) -{ - u32 reg; - - reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0); - - return !(reg & HOST_CTRL0_SIDDQ); -} - -static void samsung_exynos5_usbphy_enable(struct samsung_usbphy *sphy) -{ - void __iomem *regs = sphy->regs; - u32 phyclk = sphy->ref_clk_freq; - u32 phyhost; - u32 phyotg; - u32 phyhsic; - u32 ehcictrl; - u32 ohcictrl; - - /* - * phy_usage helps in keeping usage count for phy - * so that the first consumer enabling the phy is also - * the last consumer to disable it. - */ - - atomic_inc(&sphy->phy_usage); - - if (exynos5_phyhost_is_on(regs)) { - dev_info(sphy->dev, "Already power on PHY\n"); - return; - } - - /* Host configuration */ - phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0); - - /* phy reference clock configuration */ - phyhost &= ~HOST_CTRL0_FSEL_MASK; - phyhost |= HOST_CTRL0_FSEL(phyclk); - - /* host phy reset */ - phyhost &= ~(HOST_CTRL0_PHYSWRST | - HOST_CTRL0_PHYSWRSTALL | - HOST_CTRL0_SIDDQ | - /* Enable normal mode of operation */ - HOST_CTRL0_FORCESUSPEND | - HOST_CTRL0_FORCESLEEP); - - /* Link reset */ - phyhost |= (HOST_CTRL0_LINKSWRST | - HOST_CTRL0_UTMISWRST | - /* COMMON Block configuration during suspend */ - HOST_CTRL0_COMMONON_N); - writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); - udelay(10); - phyhost &= ~(HOST_CTRL0_LINKSWRST | - HOST_CTRL0_UTMISWRST); - writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); - - /* OTG configuration */ - phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS); - - /* phy reference clock configuration */ - phyotg &= ~OTG_SYS_FSEL_MASK; - phyotg |= OTG_SYS_FSEL(phyclk); - - /* Enable normal mode of operation */ - phyotg &= ~(OTG_SYS_FORCESUSPEND | - OTG_SYS_SIDDQ_UOTG | - OTG_SYS_FORCESLEEP | - OTG_SYS_REFCLKSEL_MASK | - /* COMMON Block configuration during suspend */ - OTG_SYS_COMMON_ON); - - /* OTG phy & link reset */ - phyotg |= (OTG_SYS_PHY0_SWRST | - OTG_SYS_LINKSWRST_UOTG | - OTG_SYS_PHYLINK_SWRESET | - OTG_SYS_OTGDISABLE | - /* Set phy refclk */ - OTG_SYS_REFCLKSEL_CLKCORE); - - writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); - udelay(10); - phyotg &= ~(OTG_SYS_PHY0_SWRST | - OTG_SYS_LINKSWRST_UOTG | - OTG_SYS_PHYLINK_SWRESET); - writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); - - /* HSIC phy configuration */ - phyhsic = (HSIC_CTRL_REFCLKDIV_12 | - HSIC_CTRL_REFCLKSEL | - HSIC_CTRL_PHYSWRST); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); - udelay(10); - phyhsic &= ~HSIC_CTRL_PHYSWRST; - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); - - udelay(80); - - /* enable EHCI DMA burst */ - ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL); - ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN | - HOST_EHCICTRL_ENAINCR4 | - HOST_EHCICTRL_ENAINCR8 | - HOST_EHCICTRL_ENAINCR16); - writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL); - - /* set ohci_suspend_on_n */ - ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL); - ohcictrl |= HOST_OHCICTRL_SUSPLGCY; - writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL); -} - -static void samsung_usbphy_enable(struct samsung_usbphy *sphy) -{ - void __iomem *regs = sphy->regs; - u32 phypwr; - u32 phyclk; - u32 rstcon; - - /* set clock frequency for PLL */ - phyclk = sphy->ref_clk_freq; - phypwr = readl(regs + SAMSUNG_PHYPWR); - rstcon = readl(regs + SAMSUNG_RSTCON); - - switch (sphy->drv_data->cpu_type) { - case TYPE_S3C64XX: - phyclk &= ~PHYCLK_COMMON_ON_N; - phypwr &= ~PHYPWR_NORMAL_MASK; - rstcon |= RSTCON_SWRST; - break; - case TYPE_EXYNOS4210: - phypwr &= ~PHYPWR_NORMAL_MASK_PHY0; - rstcon |= RSTCON_SWRST; - default: - break; - } - - writel(phyclk, regs + SAMSUNG_PHYCLK); - /* Configure PHY0 for normal operation*/ - writel(phypwr, regs + SAMSUNG_PHYPWR); - /* reset all ports of PHY and Link */ - writel(rstcon, regs + SAMSUNG_RSTCON); - udelay(10); - rstcon &= ~RSTCON_SWRST; - writel(rstcon, regs + SAMSUNG_RSTCON); -} - -static void samsung_exynos5_usbphy_disable(struct samsung_usbphy *sphy) -{ - void __iomem *regs = sphy->regs; - u32 phyhost; - u32 phyotg; - u32 phyhsic; - - if (atomic_dec_return(&sphy->phy_usage) > 0) { - dev_info(sphy->dev, "still being used\n"); - return; - } - - phyhsic = (HSIC_CTRL_REFCLKDIV_12 | - HSIC_CTRL_REFCLKSEL | - HSIC_CTRL_SIDDQ | - HSIC_CTRL_FORCESLEEP | - HSIC_CTRL_FORCESUSPEND); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); - - phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0); - phyhost |= (HOST_CTRL0_SIDDQ | - HOST_CTRL0_FORCESUSPEND | - HOST_CTRL0_FORCESLEEP | - HOST_CTRL0_PHYSWRST | - HOST_CTRL0_PHYSWRSTALL); - writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); - - phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS); - phyotg |= (OTG_SYS_FORCESUSPEND | - OTG_SYS_SIDDQ_UOTG | - OTG_SYS_FORCESLEEP); - writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); -} - -static void samsung_usbphy_disable(struct samsung_usbphy *sphy) -{ - void __iomem *regs = sphy->regs; - u32 phypwr; - - phypwr = readl(regs + SAMSUNG_PHYPWR); - - switch (sphy->drv_data->cpu_type) { - case TYPE_S3C64XX: - phypwr |= PHYPWR_NORMAL_MASK; - break; - case TYPE_EXYNOS4210: - phypwr |= PHYPWR_NORMAL_MASK_PHY0; - default: - break; - } - - /* Disable analog and otg block power */ - writel(phypwr, regs + SAMSUNG_PHYPWR); -} - -/* - * The function passed to the usb driver for phy initialization - */ -static int samsung_usbphy_init(struct usb_phy *phy) -{ - struct samsung_usbphy *sphy; - struct usb_bus *host = NULL; - unsigned long flags; - int ret = 0; - - sphy = phy_to_sphy(phy); - - host = phy->otg->host; - - /* Enable the phy clock */ - ret = clk_prepare_enable(sphy->clk); - if (ret) { - dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); - return ret; - } - - spin_lock_irqsave(&sphy->lock, flags); - - if (host) { - /* setting default phy-type for USB 2.0 */ - if (!strstr(dev_name(host->controller), "ehci") || - !strstr(dev_name(host->controller), "ohci")) - samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST); - } else { - samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); - } - - /* Disable phy isolation */ - if (sphy->plat && sphy->plat->pmu_isolation) - sphy->plat->pmu_isolation(false); - else - samsung_usbphy_set_isolation(sphy, false); - - /* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */ - samsung_usbphy_cfg_sel(sphy); - - /* Initialize usb phy registers */ - if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) - samsung_exynos5_usbphy_enable(sphy); - else - samsung_usbphy_enable(sphy); - - spin_unlock_irqrestore(&sphy->lock, flags); - - /* Disable the phy clock */ - clk_disable_unprepare(sphy->clk); - - return ret; -} - -/* - * The function passed to the usb driver for phy shutdown - */ -static void samsung_usbphy_shutdown(struct usb_phy *phy) -{ - struct samsung_usbphy *sphy; - struct usb_bus *host = NULL; - unsigned long flags; - - sphy = phy_to_sphy(phy); - - host = phy->otg->host; - - if (clk_prepare_enable(sphy->clk)) { - dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); - return; - } - - spin_lock_irqsave(&sphy->lock, flags); - - if (host) { - /* setting default phy-type for USB 2.0 */ - if (!strstr(dev_name(host->controller), "ehci") || - !strstr(dev_name(host->controller), "ohci")) - samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST); - } else { - samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); - } - - /* De-initialize usb phy registers */ - if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) - samsung_exynos5_usbphy_disable(sphy); - else - samsung_usbphy_disable(sphy); - - /* Enable phy isolation */ - if (sphy->plat && sphy->plat->pmu_isolation) - sphy->plat->pmu_isolation(true); - else - samsung_usbphy_set_isolation(sphy, true); - - spin_unlock_irqrestore(&sphy->lock, flags); - - clk_disable_unprepare(sphy->clk); -} - -static const struct of_device_id samsung_usbphy_dt_match[]; - -static inline const struct samsung_usbphy_drvdata -*samsung_usbphy_get_driver_data(struct platform_device *pdev) -{ - if (pdev->dev.of_node) { - const struct of_device_id *match; - match = of_match_node(samsung_usbphy_dt_match, - pdev->dev.of_node); - return match->data; - } - - return (struct samsung_usbphy_drvdata *) - platform_get_device_id(pdev)->driver_data; -} - -static int samsung_usbphy_probe(struct platform_device *pdev) -{ - struct samsung_usbphy *sphy; - struct usb_otg *otg; - struct samsung_usbphy_data *pdata = pdev->dev.platform_data; - const struct samsung_usbphy_drvdata *drv_data; - struct device *dev = &pdev->dev; - struct resource *phy_mem; - void __iomem *phy_base; - struct clk *clk; - int ret; - - phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!phy_mem) { - dev_err(dev, "%s: missing mem resource\n", __func__); - return -ENODEV; - } - - phy_base = devm_ioremap_resource(dev, phy_mem); - if (IS_ERR(phy_base)) - return PTR_ERR(phy_base); - - sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL); - if (!sphy) - return -ENOMEM; - - otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL); - if (!otg) - return -ENOMEM; - - drv_data = samsung_usbphy_get_driver_data(pdev); - - if (drv_data->cpu_type == TYPE_EXYNOS5250) - clk = devm_clk_get(dev, "usbhost"); - else - clk = devm_clk_get(dev, "otg"); - - if (IS_ERR(clk)) { - dev_err(dev, "Failed to get otg clock\n"); - return PTR_ERR(clk); - } - - sphy->dev = dev; - - if (dev->of_node) { - ret = samsung_usbphy_parse_dt(sphy); - if (ret < 0) - return ret; - } else { - if (!pdata) { - dev_err(dev, "no platform data specified\n"); - return -EINVAL; - } - } - - sphy->plat = pdata; - sphy->regs = phy_base; - sphy->clk = clk; - sphy->drv_data = drv_data; - sphy->phy.dev = sphy->dev; - sphy->phy.label = "samsung-usbphy"; - sphy->phy.init = samsung_usbphy_init; - sphy->phy.shutdown = samsung_usbphy_shutdown; - sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy); - - sphy->phy.otg = otg; - sphy->phy.otg->phy = &sphy->phy; - sphy->phy.otg->set_host = samsung_usbphy_set_host; - - spin_lock_init(&sphy->lock); - - platform_set_drvdata(pdev, sphy); - - return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2); -} - -static int samsung_usbphy_remove(struct platform_device *pdev) -{ - struct samsung_usbphy *sphy = platform_get_drvdata(pdev); - - usb_remove_phy(&sphy->phy); - - if (sphy->pmuregs) - iounmap(sphy->pmuregs); - if (sphy->sysreg) - iounmap(sphy->sysreg); - - return 0; -} - -static const struct samsung_usbphy_drvdata usbphy_s3c64xx = { - .cpu_type = TYPE_S3C64XX, - .devphy_en_mask = S3C64XX_USBPHY_ENABLE, -}; - -static const struct samsung_usbphy_drvdata usbphy_exynos4 = { - .cpu_type = TYPE_EXYNOS4210, - .devphy_en_mask = EXYNOS_USBPHY_ENABLE, - .hostphy_en_mask = EXYNOS_USBPHY_ENABLE, -}; - -static struct samsung_usbphy_drvdata usbphy_exynos5 = { - .cpu_type = TYPE_EXYNOS5250, - .hostphy_en_mask = EXYNOS_USBPHY_ENABLE, - .hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET, -}; - -#ifdef CONFIG_OF -static const struct of_device_id samsung_usbphy_dt_match[] = { - { - .compatible = "samsung,s3c64xx-usbphy", - .data = &usbphy_s3c64xx, - }, { - .compatible = "samsung,exynos4210-usbphy", - .data = &usbphy_exynos4, - }, { - .compatible = "samsung,exynos5250-usbphy", - .data = &usbphy_exynos5 - }, - {}, -}; -MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match); -#endif - -static struct platform_device_id samsung_usbphy_driver_ids[] = { - { - .name = "s3c64xx-usbphy", - .driver_data = (unsigned long)&usbphy_s3c64xx, - }, { - .name = "exynos4210-usbphy", - .driver_data = (unsigned long)&usbphy_exynos4, - }, { - .name = "exynos5250-usbphy", - .driver_data = (unsigned long)&usbphy_exynos5, - }, - {}, -}; - -MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids); - -static struct platform_driver samsung_usbphy_driver = { - .probe = samsung_usbphy_probe, - .remove = samsung_usbphy_remove, - .id_table = samsung_usbphy_driver_ids, - .driver = { - .name = "samsung-usbphy", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(samsung_usbphy_dt_match), - }, -}; - -module_platform_driver(samsung_usbphy_driver); - -MODULE_DESCRIPTION("Samsung USB phy controller"); -MODULE_AUTHOR("Praveen Paneri "); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:samsung-usbphy"); +EXPORT_SYMBOL_GPL(samsung_usbphy_get_refclk_freq); diff --git a/drivers/usb/phy/phy-samsung-usb.h b/drivers/usb/phy/phy-samsung-usb.h new file mode 100644 index 000000000000..481737d743d5 --- /dev/null +++ b/drivers/usb/phy/phy-samsung-usb.h @@ -0,0 +1,247 @@ +/* linux/drivers/usb/phy/phy-samsung-usb.h + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung USB-PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and + * OHCI-EXYNOS controllers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +/* Register definitions */ + +#define SAMSUNG_PHYPWR (0x00) + +#define PHYPWR_NORMAL_MASK (0x19 << 0) +#define PHYPWR_OTG_DISABLE (0x1 << 4) +#define PHYPWR_ANALOG_POWERDOWN (0x1 << 3) +#define PHYPWR_FORCE_SUSPEND (0x1 << 1) +/* For Exynos4 */ +#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0) +#define PHYPWR_SLEEP_PHY0 (0x1 << 5) + +#define SAMSUNG_PHYCLK (0x04) + +#define PHYCLK_MODE_USB11 (0x1 << 6) +#define PHYCLK_EXT_OSC (0x1 << 5) +#define PHYCLK_COMMON_ON_N (0x1 << 4) +#define PHYCLK_ID_PULL (0x1 << 2) +#define PHYCLK_CLKSEL_MASK (0x3 << 0) +#define PHYCLK_CLKSEL_48M (0x0 << 0) +#define PHYCLK_CLKSEL_12M (0x2 << 0) +#define PHYCLK_CLKSEL_24M (0x3 << 0) + +#define SAMSUNG_RSTCON (0x08) + +#define RSTCON_PHYLINK_SWRST (0x1 << 2) +#define RSTCON_HLINK_SWRST (0x1 << 1) +#define RSTCON_SWRST (0x1 << 0) + +/* EXYNOS5 */ +#define EXYNOS5_PHY_HOST_CTRL0 (0x00) + +#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31) + +#define HOST_CTRL0_REFCLKSEL_MASK (0x3 << 19) +#define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19) +#define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19) +#define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19) + +#define HOST_CTRL0_FSEL_MASK (0x7 << 16) +#define HOST_CTRL0_FSEL(_x) ((_x) << 16) + +#define FSEL_CLKSEL_50M (0x7) +#define FSEL_CLKSEL_24M (0x5) +#define FSEL_CLKSEL_20M (0x4) +#define FSEL_CLKSEL_19200K (0x3) +#define FSEL_CLKSEL_12M (0x2) +#define FSEL_CLKSEL_10M (0x1) +#define FSEL_CLKSEL_9600K (0x0) + +#define HOST_CTRL0_TESTBURNIN (0x1 << 11) +#define HOST_CTRL0_RETENABLE (0x1 << 10) +#define HOST_CTRL0_COMMONON_N (0x1 << 9) +#define HOST_CTRL0_SIDDQ (0x1 << 6) +#define HOST_CTRL0_FORCESLEEP (0x1 << 5) +#define HOST_CTRL0_FORCESUSPEND (0x1 << 4) +#define HOST_CTRL0_WORDINTERFACE (0x1 << 3) +#define HOST_CTRL0_UTMISWRST (0x1 << 2) +#define HOST_CTRL0_LINKSWRST (0x1 << 1) +#define HOST_CTRL0_PHYSWRST (0x1 << 0) + +#define EXYNOS5_PHY_HOST_TUNE0 (0x04) + +#define EXYNOS5_PHY_HSIC_CTRL1 (0x10) + +#define EXYNOS5_PHY_HSIC_TUNE1 (0x14) + +#define EXYNOS5_PHY_HSIC_CTRL2 (0x20) + +#define EXYNOS5_PHY_HSIC_TUNE2 (0x24) + +#define HSIC_CTRL_REFCLKSEL_MASK (0x3 << 23) +#define HSIC_CTRL_REFCLKSEL (0x2 << 23) + +#define HSIC_CTRL_REFCLKDIV_MASK (0x7f << 16) +#define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16) +#define HSIC_CTRL_REFCLKDIV_12 (0x24 << 16) +#define HSIC_CTRL_REFCLKDIV_15 (0x1c << 16) +#define HSIC_CTRL_REFCLKDIV_16 (0x1a << 16) +#define HSIC_CTRL_REFCLKDIV_19_2 (0x15 << 16) +#define HSIC_CTRL_REFCLKDIV_20 (0x14 << 16) + +#define HSIC_CTRL_SIDDQ (0x1 << 6) +#define HSIC_CTRL_FORCESLEEP (0x1 << 5) +#define HSIC_CTRL_FORCESUSPEND (0x1 << 4) +#define HSIC_CTRL_WORDINTERFACE (0x1 << 3) +#define HSIC_CTRL_UTMISWRST (0x1 << 2) +#define HSIC_CTRL_PHYSWRST (0x1 << 0) + +#define EXYNOS5_PHY_HOST_EHCICTRL (0x30) + +#define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29) +#define HOST_EHCICTRL_ENAINCR4 (0x1 << 28) +#define HOST_EHCICTRL_ENAINCR8 (0x1 << 27) +#define HOST_EHCICTRL_ENAINCR16 (0x1 << 26) + +#define EXYNOS5_PHY_HOST_OHCICTRL (0x34) + +#define HOST_OHCICTRL_SUSPLGCY (0x1 << 3) +#define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2) +#define HOST_OHCICTRL_CNTSEL (0x1 << 1) +#define HOST_OHCICTRL_CLKCKTRST (0x1 << 0) + +#define EXYNOS5_PHY_OTG_SYS (0x38) + +#define OTG_SYS_PHYLINK_SWRESET (0x1 << 14) +#define OTG_SYS_LINKSWRST_UOTG (0x1 << 13) +#define OTG_SYS_PHY0_SWRST (0x1 << 12) + +#define OTG_SYS_REFCLKSEL_MASK (0x3 << 9) +#define OTG_SYS_REFCLKSEL_XTAL (0x0 << 9) +#define OTG_SYS_REFCLKSEL_EXTL (0x1 << 9) +#define OTG_SYS_REFCLKSEL_CLKCORE (0x2 << 9) + +#define OTG_SYS_IDPULLUP_UOTG (0x1 << 8) +#define OTG_SYS_COMMON_ON (0x1 << 7) + +#define OTG_SYS_FSEL_MASK (0x7 << 4) +#define OTG_SYS_FSEL(_x) ((_x) << 4) + +#define OTG_SYS_FORCESLEEP (0x1 << 3) +#define OTG_SYS_OTGDISABLE (0x1 << 2) +#define OTG_SYS_SIDDQ_UOTG (0x1 << 1) +#define OTG_SYS_FORCESUSPEND (0x1 << 0) + +#define EXYNOS5_PHY_OTG_TUNE (0x40) + +#ifndef MHZ +#define MHZ (1000*1000) +#endif + +#ifndef KHZ +#define KHZ (1000) +#endif + +#define EXYNOS_USBHOST_PHY_CTRL_OFFSET (0x4) +#define S3C64XX_USBPHY_ENABLE (0x1 << 16) +#define EXYNOS_USBPHY_ENABLE (0x1 << 0) +#define EXYNOS_USB20PHY_CFG_HOST_LINK (0x1 << 0) + +enum samsung_cpu_type { + TYPE_S3C64XX, + TYPE_EXYNOS4210, + TYPE_EXYNOS5250, +}; + +/* + * struct samsung_usbphy_drvdata - driver data for various SoC variants + * @cpu_type: machine identifier + * @devphy_en_mask: device phy enable mask for PHY CONTROL register + * @hostphy_en_mask: host phy enable mask for PHY CONTROL register + * @devphy_reg_offset: offset to DEVICE PHY CONTROL register from + * mapped address of system controller. + * @hostphy_reg_offset: offset to HOST PHY CONTROL register from + * mapped address of system controller. + * + * Here we have a separate mask for device type phy. + * Having different masks for host and device type phy helps + * in setting independent masks in case of SoCs like S5PV210, + * in which PHY0 and PHY1 enable bits belong to same register + * placed at position 0 and 1 respectively. + * Although for newer SoCs like exynos these bits belong to + * different registers altogether placed at position 0. + */ +struct samsung_usbphy_drvdata { + int cpu_type; + int devphy_en_mask; + int hostphy_en_mask; + u32 devphy_reg_offset; + u32 hostphy_reg_offset; +}; + +/* + * struct samsung_usbphy - transceiver driver state + * @phy: transceiver structure + * @plat: platform data + * @dev: The parent device supplied to the probe function + * @clk: usb phy clock + * @regs: usb phy controller registers memory base + * @pmuregs: USB device PHY_CONTROL register memory base + * @sysreg: USB2.0 PHY_CFG register memory base + * @ref_clk_freq: reference clock frequency selection + * @drv_data: driver data available for different SoCs + * @phy_type: Samsung SoCs specific phy types: #HOST + * #DEVICE + * @phy_usage: usage count for phy + * @lock: lock for phy operations + */ +struct samsung_usbphy { + struct usb_phy phy; + struct samsung_usbphy_data *plat; + struct device *dev; + struct clk *clk; + void __iomem *regs; + void __iomem *pmuregs; + void __iomem *sysreg; + int ref_clk_freq; + const struct samsung_usbphy_drvdata *drv_data; + enum samsung_usb_phy_type phy_type; + atomic_t phy_usage; + spinlock_t lock; +}; + +#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy) + +static const struct of_device_id samsung_usbphy_dt_match[]; + +static inline const struct samsung_usbphy_drvdata +*samsung_usbphy_get_driver_data(struct platform_device *pdev) +{ + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(samsung_usbphy_dt_match, + pdev->dev.of_node); + return match->data; + } + + return (struct samsung_usbphy_drvdata *) + platform_get_device_id(pdev)->driver_data; +} + +extern int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy); +extern void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on); +extern void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy); +extern int samsung_usbphy_set_type(struct usb_phy *phy, + enum samsung_usb_phy_type phy_type); +extern int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy); diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c new file mode 100644 index 000000000000..dce968151505 --- /dev/null +++ b/drivers/usb/phy/phy-samsung-usb2.c @@ -0,0 +1,509 @@ +/* linux/drivers/usb/phy/phy-samsung-usb2.c + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Praveen Paneri + * + * Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and + * OHCI-EXYNOS controllers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "phy-samsung-usb.h" + +static int samsung_usbphy_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + if (!otg) + return -ENODEV; + + if (!otg->host) + otg->host = host; + + return 0; +} + +static bool exynos5_phyhost_is_on(void *regs) +{ + u32 reg; + + reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0); + + return !(reg & HOST_CTRL0_SIDDQ); +} + +static void samsung_exynos5_usb2phy_enable(struct samsung_usbphy *sphy) +{ + void __iomem *regs = sphy->regs; + u32 phyclk = sphy->ref_clk_freq; + u32 phyhost; + u32 phyotg; + u32 phyhsic; + u32 ehcictrl; + u32 ohcictrl; + + /* + * phy_usage helps in keeping usage count for phy + * so that the first consumer enabling the phy is also + * the last consumer to disable it. + */ + + atomic_inc(&sphy->phy_usage); + + if (exynos5_phyhost_is_on(regs)) { + dev_info(sphy->dev, "Already power on PHY\n"); + return; + } + + /* Host configuration */ + phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0); + + /* phy reference clock configuration */ + phyhost &= ~HOST_CTRL0_FSEL_MASK; + phyhost |= HOST_CTRL0_FSEL(phyclk); + + /* host phy reset */ + phyhost &= ~(HOST_CTRL0_PHYSWRST | + HOST_CTRL0_PHYSWRSTALL | + HOST_CTRL0_SIDDQ | + /* Enable normal mode of operation */ + HOST_CTRL0_FORCESUSPEND | + HOST_CTRL0_FORCESLEEP); + + /* Link reset */ + phyhost |= (HOST_CTRL0_LINKSWRST | + HOST_CTRL0_UTMISWRST | + /* COMMON Block configuration during suspend */ + HOST_CTRL0_COMMONON_N); + writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); + udelay(10); + phyhost &= ~(HOST_CTRL0_LINKSWRST | + HOST_CTRL0_UTMISWRST); + writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); + + /* OTG configuration */ + phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS); + + /* phy reference clock configuration */ + phyotg &= ~OTG_SYS_FSEL_MASK; + phyotg |= OTG_SYS_FSEL(phyclk); + + /* Enable normal mode of operation */ + phyotg &= ~(OTG_SYS_FORCESUSPEND | + OTG_SYS_SIDDQ_UOTG | + OTG_SYS_FORCESLEEP | + OTG_SYS_REFCLKSEL_MASK | + /* COMMON Block configuration during suspend */ + OTG_SYS_COMMON_ON); + + /* OTG phy & link reset */ + phyotg |= (OTG_SYS_PHY0_SWRST | + OTG_SYS_LINKSWRST_UOTG | + OTG_SYS_PHYLINK_SWRESET | + OTG_SYS_OTGDISABLE | + /* Set phy refclk */ + OTG_SYS_REFCLKSEL_CLKCORE); + + writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); + udelay(10); + phyotg &= ~(OTG_SYS_PHY0_SWRST | + OTG_SYS_LINKSWRST_UOTG | + OTG_SYS_PHYLINK_SWRESET); + writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); + + /* HSIC phy configuration */ + phyhsic = (HSIC_CTRL_REFCLKDIV_12 | + HSIC_CTRL_REFCLKSEL | + HSIC_CTRL_PHYSWRST); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); + udelay(10); + phyhsic &= ~HSIC_CTRL_PHYSWRST; + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); + + udelay(80); + + /* enable EHCI DMA burst */ + ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL); + ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN | + HOST_EHCICTRL_ENAINCR4 | + HOST_EHCICTRL_ENAINCR8 | + HOST_EHCICTRL_ENAINCR16); + writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL); + + /* set ohci_suspend_on_n */ + ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL); + ohcictrl |= HOST_OHCICTRL_SUSPLGCY; + writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL); +} + +static void samsung_usb2phy_enable(struct samsung_usbphy *sphy) +{ + void __iomem *regs = sphy->regs; + u32 phypwr; + u32 phyclk; + u32 rstcon; + + /* set clock frequency for PLL */ + phyclk = sphy->ref_clk_freq; + phypwr = readl(regs + SAMSUNG_PHYPWR); + rstcon = readl(regs + SAMSUNG_RSTCON); + + switch (sphy->drv_data->cpu_type) { + case TYPE_S3C64XX: + phyclk &= ~PHYCLK_COMMON_ON_N; + phypwr &= ~PHYPWR_NORMAL_MASK; + rstcon |= RSTCON_SWRST; + break; + case TYPE_EXYNOS4210: + phypwr &= ~PHYPWR_NORMAL_MASK_PHY0; + rstcon |= RSTCON_SWRST; + default: + break; + } + + writel(phyclk, regs + SAMSUNG_PHYCLK); + /* Configure PHY0 for normal operation*/ + writel(phypwr, regs + SAMSUNG_PHYPWR); + /* reset all ports of PHY and Link */ + writel(rstcon, regs + SAMSUNG_RSTCON); + udelay(10); + rstcon &= ~RSTCON_SWRST; + writel(rstcon, regs + SAMSUNG_RSTCON); +} + +static void samsung_exynos5_usb2phy_disable(struct samsung_usbphy *sphy) +{ + void __iomem *regs = sphy->regs; + u32 phyhost; + u32 phyotg; + u32 phyhsic; + + if (atomic_dec_return(&sphy->phy_usage) > 0) { + dev_info(sphy->dev, "still being used\n"); + return; + } + + phyhsic = (HSIC_CTRL_REFCLKDIV_12 | + HSIC_CTRL_REFCLKSEL | + HSIC_CTRL_SIDDQ | + HSIC_CTRL_FORCESLEEP | + HSIC_CTRL_FORCESUSPEND); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); + + phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0); + phyhost |= (HOST_CTRL0_SIDDQ | + HOST_CTRL0_FORCESUSPEND | + HOST_CTRL0_FORCESLEEP | + HOST_CTRL0_PHYSWRST | + HOST_CTRL0_PHYSWRSTALL); + writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); + + phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS); + phyotg |= (OTG_SYS_FORCESUSPEND | + OTG_SYS_SIDDQ_UOTG | + OTG_SYS_FORCESLEEP); + writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); +} + +static void samsung_usb2phy_disable(struct samsung_usbphy *sphy) +{ + void __iomem *regs = sphy->regs; + u32 phypwr; + + phypwr = readl(regs + SAMSUNG_PHYPWR); + + switch (sphy->drv_data->cpu_type) { + case TYPE_S3C64XX: + phypwr |= PHYPWR_NORMAL_MASK; + break; + case TYPE_EXYNOS4210: + phypwr |= PHYPWR_NORMAL_MASK_PHY0; + default: + break; + } + + /* Disable analog and otg block power */ + writel(phypwr, regs + SAMSUNG_PHYPWR); +} + +/* + * The function passed to the usb driver for phy initialization + */ +static int samsung_usb2phy_init(struct usb_phy *phy) +{ + struct samsung_usbphy *sphy; + struct usb_bus *host = NULL; + unsigned long flags; + int ret = 0; + + sphy = phy_to_sphy(phy); + + host = phy->otg->host; + + /* Enable the phy clock */ + ret = clk_prepare_enable(sphy->clk); + if (ret) { + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); + return ret; + } + + spin_lock_irqsave(&sphy->lock, flags); + + if (host) { + /* setting default phy-type for USB 2.0 */ + if (!strstr(dev_name(host->controller), "ehci") || + !strstr(dev_name(host->controller), "ohci")) + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST); + } else { + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); + } + + /* Disable phy isolation */ + if (sphy->plat && sphy->plat->pmu_isolation) + sphy->plat->pmu_isolation(false); + else + samsung_usbphy_set_isolation(sphy, false); + + /* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */ + samsung_usbphy_cfg_sel(sphy); + + /* Initialize usb phy registers */ + if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) + samsung_exynos5_usb2phy_enable(sphy); + else + samsung_usb2phy_enable(sphy); + + spin_unlock_irqrestore(&sphy->lock, flags); + + /* Disable the phy clock */ + clk_disable_unprepare(sphy->clk); + + return ret; +} + +/* + * The function passed to the usb driver for phy shutdown + */ +static void samsung_usb2phy_shutdown(struct usb_phy *phy) +{ + struct samsung_usbphy *sphy; + struct usb_bus *host = NULL; + unsigned long flags; + + sphy = phy_to_sphy(phy); + + host = phy->otg->host; + + if (clk_prepare_enable(sphy->clk)) { + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); + return; + } + + spin_lock_irqsave(&sphy->lock, flags); + + if (host) { + /* setting default phy-type for USB 2.0 */ + if (!strstr(dev_name(host->controller), "ehci") || + !strstr(dev_name(host->controller), "ohci")) + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST); + } else { + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); + } + + /* De-initialize usb phy registers */ + if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) + samsung_exynos5_usb2phy_disable(sphy); + else + samsung_usb2phy_disable(sphy); + + /* Enable phy isolation */ + if (sphy->plat && sphy->plat->pmu_isolation) + sphy->plat->pmu_isolation(true); + else + samsung_usbphy_set_isolation(sphy, true); + + spin_unlock_irqrestore(&sphy->lock, flags); + + clk_disable_unprepare(sphy->clk); +} + +static int samsung_usb2phy_probe(struct platform_device *pdev) +{ + struct samsung_usbphy *sphy; + struct usb_otg *otg; + struct samsung_usbphy_data *pdata = pdev->dev.platform_data; + const struct samsung_usbphy_drvdata *drv_data; + struct device *dev = &pdev->dev; + struct resource *phy_mem; + void __iomem *phy_base; + struct clk *clk; + int ret; + + phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!phy_mem) { + dev_err(dev, "%s: missing mem resource\n", __func__); + return -ENODEV; + } + + phy_base = devm_ioremap_resource(dev, phy_mem); + if (IS_ERR(phy_base)) + return PTR_ERR(phy_base); + + sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL); + if (!sphy) + return -ENOMEM; + + otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL); + if (!otg) + return -ENOMEM; + + drv_data = samsung_usbphy_get_driver_data(pdev); + + if (drv_data->cpu_type == TYPE_EXYNOS5250) + clk = devm_clk_get(dev, "usbhost"); + else + clk = devm_clk_get(dev, "otg"); + + if (IS_ERR(clk)) { + dev_err(dev, "Failed to get otg clock\n"); + return PTR_ERR(clk); + } + + sphy->dev = dev; + + if (dev->of_node) { + ret = samsung_usbphy_parse_dt(sphy); + if (ret < 0) + return ret; + } else { + if (!pdata) { + dev_err(dev, "no platform data specified\n"); + return -EINVAL; + } + } + + sphy->plat = pdata; + sphy->regs = phy_base; + sphy->clk = clk; + sphy->drv_data = drv_data; + sphy->phy.dev = sphy->dev; + sphy->phy.label = "samsung-usb2phy"; + sphy->phy.init = samsung_usb2phy_init; + sphy->phy.shutdown = samsung_usb2phy_shutdown; + sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy); + + sphy->phy.otg = otg; + sphy->phy.otg->phy = &sphy->phy; + sphy->phy.otg->set_host = samsung_usbphy_set_host; + + spin_lock_init(&sphy->lock); + + platform_set_drvdata(pdev, sphy); + + return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2); +} + +static int samsung_usb2phy_remove(struct platform_device *pdev) +{ + struct samsung_usbphy *sphy = platform_get_drvdata(pdev); + + usb_remove_phy(&sphy->phy); + + if (sphy->pmuregs) + iounmap(sphy->pmuregs); + if (sphy->sysreg) + iounmap(sphy->sysreg); + + return 0; +} + +static const struct samsung_usbphy_drvdata usb2phy_s3c64xx = { + .cpu_type = TYPE_S3C64XX, + .devphy_en_mask = S3C64XX_USBPHY_ENABLE, +}; + +static const struct samsung_usbphy_drvdata usb2phy_exynos4 = { + .cpu_type = TYPE_EXYNOS4210, + .devphy_en_mask = EXYNOS_USBPHY_ENABLE, + .hostphy_en_mask = EXYNOS_USBPHY_ENABLE, +}; + +static struct samsung_usbphy_drvdata usb2phy_exynos5 = { + .cpu_type = TYPE_EXYNOS5250, + .hostphy_en_mask = EXYNOS_USBPHY_ENABLE, + .hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET, +}; + +#ifdef CONFIG_OF +static const struct of_device_id samsung_usbphy_dt_match[] = { + { + .compatible = "samsung,s3c64xx-usb2phy", + .data = &usb2phy_s3c64xx, + }, { + .compatible = "samsung,exynos4210-usb2phy", + .data = &usb2phy_exynos4, + }, { + .compatible = "samsung,exynos5250-usb2phy", + .data = &usb2phy_exynos5 + }, + {}, +}; +MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match); +#endif + +static struct platform_device_id samsung_usbphy_driver_ids[] = { + { + .name = "s3c64xx-usb2phy", + .driver_data = (unsigned long)&usb2phy_s3c64xx, + }, { + .name = "exynos4210-usb2phy", + .driver_data = (unsigned long)&usb2phy_exynos4, + }, { + .name = "exynos5250-usb2phy", + .driver_data = (unsigned long)&usb2phy_exynos5, + }, + {}, +}; + +MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids); + +static struct platform_driver samsung_usb2phy_driver = { + .probe = samsung_usb2phy_probe, + .remove = samsung_usb2phy_remove, + .id_table = samsung_usbphy_driver_ids, + .driver = { + .name = "samsung-usb2phy", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(samsung_usbphy_dt_match), + }, +}; + +module_platform_driver(samsung_usb2phy_driver); + +MODULE_DESCRIPTION("Samsung USB 2.0 phy controller"); +MODULE_AUTHOR("Praveen Paneri "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:samsung-usb2phy"); -- cgit v1.2.3 From b52767581765d3d1a1ba7106674791e540574704 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Thu, 14 Mar 2013 15:59:11 +0530 Subject: usb: phy: samsung: Add PHY support for USB 3.0 controller Adding PHY driver support for USB 3.0 controller for Samsung's SoCs. Signed-off-by: Vivek Gautam Acked-by: Kukjin Kim Signed-off-by: Felipe Balbi --- .../devicetree/bindings/usb/samsung-usbphy.txt | 54 ++++ drivers/usb/phy/Kconfig | 7 + drivers/usb/phy/Makefile | 1 + drivers/usb/phy/phy-samsung-usb.h | 80 +++++ drivers/usb/phy/phy-samsung-usb3.c | 349 +++++++++++++++++++++ 5 files changed, 491 insertions(+) create mode 100644 drivers/usb/phy/phy-samsung-usb3.c (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt index 96940abe9a57..f575302e5173 100644 --- a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt @@ -61,3 +61,57 @@ Example: reg = <0x10020704 0x8>; }; }; + + +** Samsung's usb 3.0 phy transceiver + +Starting exynso5250, Samsung's SoC have usb 3.0 phy transceiver +which is used for controlling usb 3.0 phy for dwc3-exynos usb 3.0 +controllers across Samsung SOCs. + +Required properties: + +Exynos5250: +- compatible : should be "samsung,exynos5250-usb3phy" +- reg : base physical address of the phy registers and length of memory mapped + region. +- clocks: Clock IDs array as required by the controller. +- clock-names: names of clocks correseponding to IDs in the clock property + as requested by the controller driver. + +Optional properties: +- #address-cells: should be '1' when usbphy node has a child node with 'reg' + property. +- #size-cells: should be '1' when usbphy node has a child node with 'reg' + property. +- ranges: allows valid translation between child's address space and parent's + address space. + +- The child node 'usbphy-sys' to the node 'usbphy' is for the system controller + interface for usb-phy. It should provide the following information required by + usb-phy controller to control phy. + - reg : base physical address of PHY_CONTROL registers. + The size of this register is the total sum of size of all PHY_CONTROL + registers that the SoC has. For example, the size will be + '0x4' in case we have only one PHY_CONTROL register (e.g. + OTHERS register in S3C64XX or USB_PHY_CONTROL register in S5PV210) + and, '0x8' in case we have two PHY_CONTROL registers (e.g. + USBDEVICE_PHY_CONTROL and USBHOST_PHY_CONTROL registers in exynos4x). + and so on. + +Example: + usbphy@12100000 { + compatible = "samsung,exynos5250-usb3phy"; + reg = <0x12100000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&clock 1>, <&clock 286>; + clock-names = "ext_xtal", "usbdrd30"; + + usbphy-sys { + /* USB device and host PHY_CONTROL registers */ + reg = <0x10040704 0x8>; + }; + }; diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index e8cd52ac5c05..7e8fe0f0b8c6 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -99,6 +99,13 @@ config SAMSUNG_USB2PHY Enable this to support Samsung USB 2.0 (High Speed) PHY controller driver for Samsung SoCs. +config SAMSUNG_USB3PHY + tristate "Samsung USB 3.0 PHY controller Driver" + select SAMSUNG_USBPHY + help + Enable this to support Samsung USB 3.0 (Super Speed) phy controller + for samsung SoCs. + config TWL4030_USB tristate "TWL4030 USB Transceiver Driver" depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index 8cd355f051f6..33863c09f3dc 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o obj-$(CONFIG_OMAP_USB3) += phy-omap-usb3.o obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o obj-$(CONFIG_SAMSUNG_USB2PHY) += phy-samsung-usb2.o +obj-$(CONFIG_SAMSUNG_USB3PHY) += phy-samsung-usb3.o obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o obj-$(CONFIG_TWL6030_USB) += phy-twl6030-usb.o obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o diff --git a/drivers/usb/phy/phy-samsung-usb.h b/drivers/usb/phy/phy-samsung-usb.h index 481737d743d5..70a9cae5e37f 100644 --- a/drivers/usb/phy/phy-samsung-usb.h +++ b/drivers/usb/phy/phy-samsung-usb.h @@ -145,6 +145,86 @@ #define EXYNOS5_PHY_OTG_TUNE (0x40) +/* EXYNOS5: USB 3.0 DRD */ +#define EXYNOS5_DRD_LINKSYSTEM (0x04) + +#define LINKSYSTEM_FLADJ_MASK (0x3f << 1) +#define LINKSYSTEM_FLADJ(_x) ((_x) << 1) +#define LINKSYSTEM_XHCI_VERSION_CONTROL (0x1 << 27) + +#define EXYNOS5_DRD_PHYUTMI (0x08) + +#define PHYUTMI_OTGDISABLE (0x1 << 6) +#define PHYUTMI_FORCESUSPEND (0x1 << 1) +#define PHYUTMI_FORCESLEEP (0x1 << 0) + +#define EXYNOS5_DRD_PHYPIPE (0x0c) + +#define EXYNOS5_DRD_PHYCLKRST (0x10) + +#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23) +#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23) + +#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21) +#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21) + +#define PHYCLKRST_SSC_EN (0x1 << 20) +#define PHYCLKRST_REF_SSP_EN (0x1 << 19) +#define PHYCLKRST_REF_CLKDIV2 (0x1 << 18) + +#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x02 << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11) + +#define PHYCLKRST_FSEL_MASK (0x3f << 5) +#define PHYCLKRST_FSEL(_x) ((_x) << 5) +#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5) +#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5) +#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5) +#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5) + +#define PHYCLKRST_RETENABLEN (0x1 << 4) + +#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2) +#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2) +#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2) + +#define PHYCLKRST_PORTRESET (0x1 << 1) +#define PHYCLKRST_COMMONONN (0x1 << 0) + +#define EXYNOS5_DRD_PHYREG0 (0x14) +#define EXYNOS5_DRD_PHYREG1 (0x18) + +#define EXYNOS5_DRD_PHYPARAM0 (0x1c) + +#define PHYPARAM0_REF_USE_PAD (0x1 << 31) +#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26) +#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26) + +#define EXYNOS5_DRD_PHYPARAM1 (0x20) + +#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0) +#define PHYPARAM1_PCS_TXDEEMPH (0x1c) + +#define EXYNOS5_DRD_PHYTERM (0x24) + +#define EXYNOS5_DRD_PHYTEST (0x28) + +#define PHYTEST_POWERDOWN_SSP (0x1 << 3) +#define PHYTEST_POWERDOWN_HSP (0x1 << 2) + +#define EXYNOS5_DRD_PHYADP (0x2c) + +#define EXYNOS5_DRD_PHYBATCHG (0x30) + +#define PHYBATCHG_UTMI_CLKSEL (0x1 << 2) + +#define EXYNOS5_DRD_PHYRESUME (0x34) +#define EXYNOS5_DRD_LINKPORT (0x44) + #ifndef MHZ #define MHZ (1000*1000) #endif diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c new file mode 100644 index 000000000000..54f641860f9e --- /dev/null +++ b/drivers/usb/phy/phy-samsung-usb3.c @@ -0,0 +1,349 @@ +/* linux/drivers/usb/phy/phy-samsung-usb3.c + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Vivek Gautam + * + * Samsung USB 3.0 PHY transceiver; talks to DWC3 controller. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "phy-samsung-usb.h" + +/* + * Sets the phy clk as EXTREFCLK (XXTI) which is internal clock from clock core. + */ +static u32 samsung_usb3phy_set_refclk(struct samsung_usbphy *sphy) +{ + u32 reg; + u32 refclk; + + refclk = sphy->ref_clk_freq; + + reg = PHYCLKRST_REFCLKSEL_EXT_REFCLK | + PHYCLKRST_FSEL(refclk); + + switch (refclk) { + case FSEL_CLKSEL_50M: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF | + PHYCLKRST_SSC_REFCLKSEL(0x00)); + break; + case FSEL_CLKSEL_20M: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF | + PHYCLKRST_SSC_REFCLKSEL(0x00)); + break; + case FSEL_CLKSEL_19200K: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF | + PHYCLKRST_SSC_REFCLKSEL(0x88)); + break; + case FSEL_CLKSEL_24M: + default: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF | + PHYCLKRST_SSC_REFCLKSEL(0x88)); + break; + } + + return reg; +} + +static int samsung_exynos5_usb3phy_enable(struct samsung_usbphy *sphy) +{ + void __iomem *regs = sphy->regs; + u32 phyparam0; + u32 phyparam1; + u32 linksystem; + u32 phybatchg; + u32 phytest; + u32 phyclkrst; + + /* Reset USB 3.0 PHY */ + writel(0x0, regs + EXYNOS5_DRD_PHYREG0); + + phyparam0 = readl(regs + EXYNOS5_DRD_PHYPARAM0); + /* Select PHY CLK source */ + phyparam0 &= ~PHYPARAM0_REF_USE_PAD; + /* Set Loss-of-Signal Detector sensitivity */ + phyparam0 &= ~PHYPARAM0_REF_LOSLEVEL_MASK; + phyparam0 |= PHYPARAM0_REF_LOSLEVEL; + writel(phyparam0, regs + EXYNOS5_DRD_PHYPARAM0); + + writel(0x0, regs + EXYNOS5_DRD_PHYRESUME); + + /* + * Setting the Frame length Adj value[6:1] to default 0x20 + * See xHCI 1.0 spec, 5.2.4 + */ + linksystem = LINKSYSTEM_XHCI_VERSION_CONTROL | + LINKSYSTEM_FLADJ(0x20); + writel(linksystem, regs + EXYNOS5_DRD_LINKSYSTEM); + + phyparam1 = readl(regs + EXYNOS5_DRD_PHYPARAM1); + /* Set Tx De-Emphasis level */ + phyparam1 &= ~PHYPARAM1_PCS_TXDEEMPH_MASK; + phyparam1 |= PHYPARAM1_PCS_TXDEEMPH; + writel(phyparam1, regs + EXYNOS5_DRD_PHYPARAM1); + + phybatchg = readl(regs + EXYNOS5_DRD_PHYBATCHG); + phybatchg |= PHYBATCHG_UTMI_CLKSEL; + writel(phybatchg, regs + EXYNOS5_DRD_PHYBATCHG); + + /* PHYTEST POWERDOWN Control */ + phytest = readl(regs + EXYNOS5_DRD_PHYTEST); + phytest &= ~(PHYTEST_POWERDOWN_SSP | + PHYTEST_POWERDOWN_HSP); + writel(phytest, regs + EXYNOS5_DRD_PHYTEST); + + /* UTMI Power Control */ + writel(PHYUTMI_OTGDISABLE, regs + EXYNOS5_DRD_PHYUTMI); + + phyclkrst = samsung_usb3phy_set_refclk(sphy); + + phyclkrst |= PHYCLKRST_PORTRESET | + /* Digital power supply in normal operating mode */ + PHYCLKRST_RETENABLEN | + /* Enable ref clock for SS function */ + PHYCLKRST_REF_SSP_EN | + /* Enable spread spectrum */ + PHYCLKRST_SSC_EN | + /* Power down HS Bias and PLL blocks in suspend mode */ + PHYCLKRST_COMMONONN; + + writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST); + + udelay(10); + + phyclkrst &= ~(PHYCLKRST_PORTRESET); + writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST); + + return 0; +} + +static void samsung_exynos5_usb3phy_disable(struct samsung_usbphy *sphy) +{ + u32 phyutmi; + u32 phyclkrst; + u32 phytest; + void __iomem *regs = sphy->regs; + + phyutmi = PHYUTMI_OTGDISABLE | + PHYUTMI_FORCESUSPEND | + PHYUTMI_FORCESLEEP; + writel(phyutmi, regs + EXYNOS5_DRD_PHYUTMI); + + /* Resetting the PHYCLKRST enable bits to reduce leakage current */ + phyclkrst = readl(regs + EXYNOS5_DRD_PHYCLKRST); + phyclkrst &= ~(PHYCLKRST_REF_SSP_EN | + PHYCLKRST_SSC_EN | + PHYCLKRST_COMMONONN); + writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST); + + /* Control PHYTEST to remove leakage current */ + phytest = readl(regs + EXYNOS5_DRD_PHYTEST); + phytest |= (PHYTEST_POWERDOWN_SSP | + PHYTEST_POWERDOWN_HSP); + writel(phytest, regs + EXYNOS5_DRD_PHYTEST); +} + +static int samsung_usb3phy_init(struct usb_phy *phy) +{ + struct samsung_usbphy *sphy; + unsigned long flags; + int ret = 0; + + sphy = phy_to_sphy(phy); + + /* Enable the phy clock */ + ret = clk_prepare_enable(sphy->clk); + if (ret) { + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); + return ret; + } + + spin_lock_irqsave(&sphy->lock, flags); + + /* setting default phy-type for USB 3.0 */ + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); + + /* Disable phy isolation */ + samsung_usbphy_set_isolation(sphy, false); + + /* Initialize usb phy registers */ + samsung_exynos5_usb3phy_enable(sphy); + + spin_unlock_irqrestore(&sphy->lock, flags); + + /* Disable the phy clock */ + clk_disable_unprepare(sphy->clk); + + return ret; +} + +/* + * The function passed to the usb driver for phy shutdown + */ +static void samsung_usb3phy_shutdown(struct usb_phy *phy) +{ + struct samsung_usbphy *sphy; + unsigned long flags; + + sphy = phy_to_sphy(phy); + + if (clk_prepare_enable(sphy->clk)) { + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); + return; + } + + spin_lock_irqsave(&sphy->lock, flags); + + /* setting default phy-type for USB 3.0 */ + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); + + /* De-initialize usb phy registers */ + samsung_exynos5_usb3phy_disable(sphy); + + /* Enable phy isolation */ + samsung_usbphy_set_isolation(sphy, true); + + spin_unlock_irqrestore(&sphy->lock, flags); + + clk_disable_unprepare(sphy->clk); +} + +static int samsung_usb3phy_probe(struct platform_device *pdev) +{ + struct samsung_usbphy *sphy; + struct samsung_usbphy_data *pdata = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct resource *phy_mem; + void __iomem *phy_base; + struct clk *clk; + int ret; + + phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!phy_mem) { + dev_err(dev, "%s: missing mem resource\n", __func__); + return -ENODEV; + } + + phy_base = devm_request_and_ioremap(dev, phy_mem); + if (!phy_base) { + dev_err(dev, "%s: register mapping failed\n", __func__); + return -ENXIO; + } + + sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL); + if (!sphy) + return -ENOMEM; + + clk = devm_clk_get(dev, "usbdrd30"); + if (IS_ERR(clk)) { + dev_err(dev, "Failed to get device clock\n"); + return PTR_ERR(clk); + } + + sphy->dev = dev; + + if (dev->of_node) { + ret = samsung_usbphy_parse_dt(sphy); + if (ret < 0) + return ret; + } else { + if (!pdata) { + dev_err(dev, "no platform data specified\n"); + return -EINVAL; + } + } + + sphy->plat = pdata; + sphy->regs = phy_base; + sphy->clk = clk; + sphy->phy.dev = sphy->dev; + sphy->phy.label = "samsung-usb3phy"; + sphy->phy.init = samsung_usb3phy_init; + sphy->phy.shutdown = samsung_usb3phy_shutdown; + sphy->drv_data = samsung_usbphy_get_driver_data(pdev); + sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy); + + spin_lock_init(&sphy->lock); + + platform_set_drvdata(pdev, sphy); + + return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB3); +} + +static int samsung_usb3phy_remove(struct platform_device *pdev) +{ + struct samsung_usbphy *sphy = platform_get_drvdata(pdev); + + usb_remove_phy(&sphy->phy); + + if (sphy->pmuregs) + iounmap(sphy->pmuregs); + if (sphy->sysreg) + iounmap(sphy->sysreg); + + return 0; +} + +static struct samsung_usbphy_drvdata usb3phy_exynos5 = { + .cpu_type = TYPE_EXYNOS5250, + .devphy_en_mask = EXYNOS_USBPHY_ENABLE, +}; + +#ifdef CONFIG_OF +static const struct of_device_id samsung_usbphy_dt_match[] = { + { + .compatible = "samsung,exynos5250-usb3phy", + .data = &usb3phy_exynos5 + }, + {}, +}; +MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match); +#endif + +static struct platform_device_id samsung_usbphy_driver_ids[] = { + { + .name = "exynos5250-usb3phy", + .driver_data = (unsigned long)&usb3phy_exynos5, + }, + {}, +}; + +MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids); + +static struct platform_driver samsung_usb3phy_driver = { + .probe = samsung_usb3phy_probe, + .remove = samsung_usb3phy_remove, + .id_table = samsung_usbphy_driver_ids, + .driver = { + .name = "samsung-usb3phy", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(samsung_usbphy_dt_match), + }, +}; + +module_platform_driver(samsung_usb3phy_driver); + +MODULE_DESCRIPTION("Samsung USB 3.0 phy controller"); +MODULE_AUTHOR("Vivek Gautam "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:samsung-usb3phy"); -- cgit v1.2.3 From eee44da0453cfe9125f4297e4244fe1d6fb1c653 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 7 Mar 2013 18:51:46 +0530 Subject: usb: musb: omap2430: replace *_* with *-* in property names No functional change. Replace *_* with *-* in property names of otg to follow the general convention. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi --- Documentation/devicetree/bindings/usb/omap-usb.txt | 12 ++++++------ drivers/usb/musb/omap2430.c | 6 +++--- 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 1b9f55fd96c0..662f0f1d2315 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -8,10 +8,10 @@ OMAP MUSB GLUE and disconnect. - multipoint : Should be "1" indicating the musb controller supports multipoint. This is a MUSB configuration-specific setting. - - num_eps : Specifies the number of endpoints. This is also a + - num-eps : Specifies the number of endpoints. This is also a MUSB configuration-specific setting. Should be set to "16" - - ram_bits : Specifies the ram address size. Should be set to "12" - - interface_type : This is a board specific setting to describe the type of + - ram-bits : Specifies the ram address size. Should be set to "12" + - interface-type : This is a board specific setting to describe the type of interface between the controller and the phy. It should be "0" or "1" specifying ULPI and UTMI respectively. - mode : Should be "3" to represent OTG. "1" signifies HOST and "2" @@ -29,14 +29,14 @@ usb_otg_hs: usb_otg_hs@4a0ab000 { ti,hwmods = "usb_otg_hs"; ti,has-mailbox; multipoint = <1>; - num_eps = <16>; - ram_bits = <12>; + num-eps = <16>; + ram-bits = <12>; ctrl-module = <&omap_control_usb>; }; Board specific device node entry &usb_otg_hs { - interface_type = <1>; + interface-type = <1>; mode = <3>; power = <50>; }; diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 8ba9bb2a91a7..e7b5eae5a141 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -526,10 +526,10 @@ static int omap2430_probe(struct platform_device *pdev) } of_property_read_u32(np, "mode", (u32 *)&pdata->mode); - of_property_read_u32(np, "interface_type", + of_property_read_u32(np, "interface-type", (u32 *)&data->interface_type); - of_property_read_u32(np, "num_eps", (u32 *)&config->num_eps); - of_property_read_u32(np, "ram_bits", (u32 *)&config->ram_bits); + of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps); + of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits); of_property_read_u32(np, "power", (u32 *)&pdata->power); config->multipoint = of_property_read_bool(np, "multipoint"); pdata->has_mailbox = of_property_read_bool(np, -- cgit v1.2.3