From 523d3de41f02141f6f6cd497d07946a2837432cf Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 21 Aug 2017 10:05:01 +0200 Subject: clk: samsung: exynos5433: Add support for runtime PM Add runtime pm support for all clock controller units (CMU), which belong to power domains and require special handling during on/off operations. Typically special values has to be written to MUX registers to change internal clocks parents to OSC clock before turning power off. During such operation all clocks, which enter CMU has to be enabled to let MUX to stabilize. Also for each CMU there is one special parent clock, which has to be enabled all the time when any access to CMU registers is being done. This patch solves most of the mysterious external abort and freeze issues caused by a lack of proper parent CMU clock enabled or incorrect turn off procedure. Signed-off-by: Marek Szyprowski Reviewed-by: Ulf Hansson Reviewed-by: Chanwoo Choi Tested-by: Chanwoo Choi Reviewed-by: Krzysztof Kozlowski Signed-off-by: Michael Turquette Link: lkml.kernel.org/r/1503302703-13801-4-git-send-email-m.szyprowski@samsung.com --- .../devicetree/bindings/clock/exynos5433-clock.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt index 1dc80f8811fe..5c7dd12e667a 100644 --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -168,6 +168,11 @@ Required Properties: - aclk_cam1_400 - aclk_cam1_552 +Optional properties: + - power-domains: a phandle to respective power domain node as described by + generic PM domain bindings (see power/power_domain.txt for more + information). + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. @@ -270,6 +275,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_G2D_266>, <&cmu_top CLK_ACLK_G2D_400>; + power-domains = <&pd_g2d>; }; cmu_disp: clock-controller@13b90000 { @@ -295,6 +301,7 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, <&cmu_mif CLK_ACLK_DISP_333>; + power-domains = <&pd_disp>; }; cmu_aud: clock-controller@114c0000 { @@ -304,6 +311,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "fout_aud_pll"; clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>; + power-domains = <&pd_aud>; }; cmu_bus0: clock-controller@13600000 { @@ -340,6 +348,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "aclk_g3d_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; + power-domains = <&pd_g3d>; }; cmu_gscl: clock-controller@13cf0000 { @@ -353,6 +362,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_GSCL_111>, <&cmu_top CLK_ACLK_GSCL_333>; + power-domains = <&pd_gscl>; }; cmu_apollo: clock-controller@11900000 { @@ -384,6 +394,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_SCLK_JPEG_MSCL>, <&cmu_top CLK_ACLK_MSCL_400>; + power-domains = <&pd_mscl>; }; cmu_mfc: clock-controller@15280000 { @@ -393,6 +404,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "aclk_mfc_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; + power-domains = <&pd_mfc>; }; cmu_hevc: clock-controller@14f80000 { @@ -402,6 +414,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "aclk_hevc_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; + power-domains = <&pd_hevc>; }; cmu_isp: clock-controller@146d0000 { @@ -415,6 +428,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_ISP_DIS_400>, <&cmu_top CLK_ACLK_ISP_400>; + power-domains = <&pd_isp>; }; cmu_cam0: clock-controller@120d0000 { @@ -430,6 +444,7 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_top CLK_ACLK_CAM0_333>, <&cmu_top CLK_ACLK_CAM0_400>, <&cmu_top CLK_ACLK_CAM0_552>; + power-domains = <&pd_cam0>; }; cmu_cam1: clock-controller@145d0000 { @@ -451,6 +466,7 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_top CLK_ACLK_CAM1_333>, <&cmu_top CLK_ACLK_CAM1_400>, <&cmu_top CLK_ACLK_CAM1_552>; + power-domains = <&pd_cam1>; }; Example 3: UART controller node that consumes the clock generated by the clock -- cgit v1.2.3 From ae432a9b314e07d486acfadc4df2f922721e6757 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 21 Aug 2017 10:05:03 +0200 Subject: clk: samsung: exynos-audss: Add support for runtime PM This patch adds support for runtime PM to Exynos Audio SubSystem driver to enable full support for audio power domain on Exynos5 SoCs. The main change is moving register saving and restoring code from system sleep PM ops to runtime PM ops and implementing system sleep PM ops with generic pm_runtime_force_suspend/resume helpers. Runtime PM of the Exynos AudSS device is managed from clock core depending on the preparation status of the provided clocks. Signed-off-by: Marek Szyprowski Reviewed-by: Ulf Hansson Reviewed-by: Krzysztof Kozlowski Reviewed-by: Chanwoo Choi Signed-off-by: Michael Turquette Link: lkml.kernel.org/r/1503302703-13801-6-git-send-email-m.szyprowski@samsung.com --- .../devicetree/bindings/clock/clk-exynos-audss.txt | 6 +++ drivers/clk/samsung/clk-exynos-audss.c | 51 ++++++++++++++-------- 2 files changed, 40 insertions(+), 17 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt index 0c3d6015868d..f3635d5aeba4 100644 --- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt +++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt @@ -33,6 +33,12 @@ Required Properties: - clock-names: Aliases for the above clocks. They should be "pll_ref", "pll_in", "cdclk", "sclk_audio", and "sclk_pcm_in" respectively. +Optional Properties: + + - power-domains: a phandle to respective power domain node as described by + generic PM domain bindings (see power/power_domain.txt for more + information). + The following is the list of clocks generated by the controller. Each clock is assigned an identifier and client nodes use this identifier to specify the clock which they consume. Some of the clocks are available only on a particular diff --git a/drivers/clk/samsung/clk-exynos-audss.c b/drivers/clk/samsung/clk-exynos-audss.c index 6be52fb46ff3..ab494c104ce6 100644 --- a/drivers/clk/samsung/clk-exynos-audss.c +++ b/drivers/clk/samsung/clk-exynos-audss.c @@ -18,6 +18,7 @@ #include #include #include +#include #include @@ -36,14 +37,13 @@ static struct clk *epll; #define ASS_CLK_DIV 0x4 #define ASS_CLK_GATE 0x8 -#ifdef CONFIG_PM_SLEEP static unsigned long reg_save[][2] = { { ASS_CLK_SRC, 0 }, { ASS_CLK_DIV, 0 }, { ASS_CLK_GATE, 0 }, }; -static int exynos_audss_clk_suspend(struct device *dev) +static int __maybe_unused exynos_audss_clk_suspend(struct device *dev) { int i; @@ -53,7 +53,7 @@ static int exynos_audss_clk_suspend(struct device *dev) return 0; } -static int exynos_audss_clk_resume(struct device *dev) +static int __maybe_unused exynos_audss_clk_resume(struct device *dev) { int i; @@ -62,7 +62,6 @@ static int exynos_audss_clk_resume(struct device *dev) return 0; } -#endif /* CONFIG_PM_SLEEP */ struct exynos_audss_clk_drvdata { unsigned int has_adma_clk:1; @@ -179,7 +178,18 @@ static int exynos_audss_clk_probe(struct platform_device *pdev) } } } - clk_table[EXYNOS_MOUT_AUDSS] = clk_hw_register_mux(NULL, "mout_audss", + + /* + * Enable runtime PM here to allow the clock core using runtime PM + * for the registered clocks. Additionally, we increase the runtime + * PM usage count before registering the clocks, to prevent the + * clock core from runtime suspending the device. + */ + pm_runtime_get_noresume(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + clk_table[EXYNOS_MOUT_AUDSS] = clk_hw_register_mux(dev, "mout_audss", mout_audss_p, ARRAY_SIZE(mout_audss_p), CLK_SET_RATE_NO_REPARENT, reg_base + ASS_CLK_SRC, 0, 1, 0, &lock); @@ -190,48 +200,48 @@ static int exynos_audss_clk_probe(struct platform_device *pdev) mout_i2s_p[1] = __clk_get_name(cdclk); if (!IS_ERR(sclk_audio)) mout_i2s_p[2] = __clk_get_name(sclk_audio); - clk_table[EXYNOS_MOUT_I2S] = clk_hw_register_mux(NULL, "mout_i2s", + clk_table[EXYNOS_MOUT_I2S] = clk_hw_register_mux(dev, "mout_i2s", mout_i2s_p, ARRAY_SIZE(mout_i2s_p), CLK_SET_RATE_NO_REPARENT, reg_base + ASS_CLK_SRC, 2, 2, 0, &lock); - clk_table[EXYNOS_DOUT_SRP] = clk_hw_register_divider(NULL, "dout_srp", + clk_table[EXYNOS_DOUT_SRP] = clk_hw_register_divider(dev, "dout_srp", "mout_audss", 0, reg_base + ASS_CLK_DIV, 0, 4, 0, &lock); - clk_table[EXYNOS_DOUT_AUD_BUS] = clk_hw_register_divider(NULL, + clk_table[EXYNOS_DOUT_AUD_BUS] = clk_hw_register_divider(dev, "dout_aud_bus", "dout_srp", 0, reg_base + ASS_CLK_DIV, 4, 4, 0, &lock); - clk_table[EXYNOS_DOUT_I2S] = clk_hw_register_divider(NULL, "dout_i2s", + clk_table[EXYNOS_DOUT_I2S] = clk_hw_register_divider(dev, "dout_i2s", "mout_i2s", 0, reg_base + ASS_CLK_DIV, 8, 4, 0, &lock); - clk_table[EXYNOS_SRP_CLK] = clk_hw_register_gate(NULL, "srp_clk", + clk_table[EXYNOS_SRP_CLK] = clk_hw_register_gate(dev, "srp_clk", "dout_srp", CLK_SET_RATE_PARENT, reg_base + ASS_CLK_GATE, 0, 0, &lock); - clk_table[EXYNOS_I2S_BUS] = clk_hw_register_gate(NULL, "i2s_bus", + clk_table[EXYNOS_I2S_BUS] = clk_hw_register_gate(dev, "i2s_bus", "dout_aud_bus", CLK_SET_RATE_PARENT, reg_base + ASS_CLK_GATE, 2, 0, &lock); - clk_table[EXYNOS_SCLK_I2S] = clk_hw_register_gate(NULL, "sclk_i2s", + clk_table[EXYNOS_SCLK_I2S] = clk_hw_register_gate(dev, "sclk_i2s", "dout_i2s", CLK_SET_RATE_PARENT, reg_base + ASS_CLK_GATE, 3, 0, &lock); - clk_table[EXYNOS_PCM_BUS] = clk_hw_register_gate(NULL, "pcm_bus", + clk_table[EXYNOS_PCM_BUS] = clk_hw_register_gate(dev, "pcm_bus", "sclk_pcm", CLK_SET_RATE_PARENT, reg_base + ASS_CLK_GATE, 4, 0, &lock); sclk_pcm_in = devm_clk_get(dev, "sclk_pcm_in"); if (!IS_ERR(sclk_pcm_in)) sclk_pcm_p = __clk_get_name(sclk_pcm_in); - clk_table[EXYNOS_SCLK_PCM] = clk_hw_register_gate(NULL, "sclk_pcm", + clk_table[EXYNOS_SCLK_PCM] = clk_hw_register_gate(dev, "sclk_pcm", sclk_pcm_p, CLK_SET_RATE_PARENT, reg_base + ASS_CLK_GATE, 5, 0, &lock); if (variant->has_adma_clk) { - clk_table[EXYNOS_ADMA] = clk_hw_register_gate(NULL, "adma", + clk_table[EXYNOS_ADMA] = clk_hw_register_gate(dev, "adma", "dout_srp", CLK_SET_RATE_PARENT, reg_base + ASS_CLK_GATE, 9, 0, &lock); } @@ -251,10 +261,14 @@ static int exynos_audss_clk_probe(struct platform_device *pdev) goto unregister; } + pm_runtime_put_sync(dev); + return 0; unregister: exynos_audss_clk_teardown(); + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); if (!IS_ERR(epll)) clk_disable_unprepare(epll); @@ -267,6 +281,7 @@ static int exynos_audss_clk_remove(struct platform_device *pdev) of_clk_del_provider(pdev->dev.of_node); exynos_audss_clk_teardown(); + pm_runtime_disable(&pdev->dev); if (!IS_ERR(epll)) clk_disable_unprepare(epll); @@ -275,8 +290,10 @@ static int exynos_audss_clk_remove(struct platform_device *pdev) } static const struct dev_pm_ops exynos_audss_clk_pm_ops = { - SET_LATE_SYSTEM_SLEEP_PM_OPS(exynos_audss_clk_suspend, - exynos_audss_clk_resume) + SET_RUNTIME_PM_OPS(exynos_audss_clk_suspend, exynos_audss_clk_resume, + NULL) + SET_LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) }; static struct platform_driver exynos_audss_clk_driver = { -- cgit v1.2.3 From 8d46e28fb5081b49c5b24c814ad464fb99359d58 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 9 Sep 2017 00:34:20 +0300 Subject: clk: renesas: cpg-mssr: Add R8A77970 support Add R-Car V3M (R8A77970) Clock Pulse Generator / Module Standby and Software Reset support, using the CPG/MSSR driver core and the common R-Car Gen3 code. Based on the original (and large) patch by Daisuke Matsushita . Signed-off-by: Vladimir Barinov Signed-off-by: Sergei Shtylyov Signed-off-by: Geert Uytterhoeven --- .../devicetree/bindings/clock/renesas,cpg-mssr.txt | 5 +- drivers/clk/renesas/Kconfig | 5 + drivers/clk/renesas/Makefile | 1 + drivers/clk/renesas/r8a77970-cpg-mssr.c | 199 +++++++++++++++++++++ drivers/clk/renesas/renesas-cpg-mssr.c | 6 + drivers/clk/renesas/renesas-cpg-mssr.h | 1 + 6 files changed, 215 insertions(+), 2 deletions(-) create mode 100644 drivers/clk/renesas/r8a77970-cpg-mssr.c (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt index 316e13686568..f1890d0777a6 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt @@ -22,6 +22,7 @@ Required Properties: - "renesas,r8a7794-cpg-mssr" for the r8a7794 SoC (R-Car E2) - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3) - "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W) + - "renesas,r8a77970-cpg-mssr" for the r8a77970 SoC (R-Car V3M) - "renesas,r8a77995-cpg-mssr" for the r8a77995 SoC (R-Car D3) - reg: Base address and length of the memory resource used by the CPG/MSSR @@ -31,8 +32,8 @@ Required Properties: clock-names - clock-names: List of external parent clock names. Valid names are: - "extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7792, r8a7793, r8a7794, - r8a7795, r8a7796, r8a77995) - - "extalr" (r8a7795, r8a7796) + r8a7795, r8a7796, r8a77970, r8a77995) + - "extalr" (r8a7795, r8a7796, r8a77970) - "usb_extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7793, r8a7794) - #clock-cells: Must be 2 diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig index acbb38151ba1..43b5a89c4b28 100644 --- a/drivers/clk/renesas/Kconfig +++ b/drivers/clk/renesas/Kconfig @@ -15,6 +15,7 @@ config CLK_RENESAS select CLK_R8A7794 if ARCH_R8A7794 select CLK_R8A7795 if ARCH_R8A7795 select CLK_R8A7796 if ARCH_R8A7796 + select CLK_R8A77970 if ARCH_R8A77970 select CLK_R8A77995 if ARCH_R8A77995 select CLK_SH73A0 if ARCH_SH73A0 @@ -95,6 +96,10 @@ config CLK_R8A7796 bool "R-Car M3-W clock support" if COMPILE_TEST select CLK_RCAR_GEN3_CPG +config CLK_R8A77970 + bool "R-Car V3M clock support" if COMPILE_TEST + select CLK_RCAR_GEN3_CPG + config CLK_R8A77995 bool "R-Car D3 clock support" if COMPILE_TEST select CLK_RCAR_GEN3_CPG diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile index 9bda3ec5b199..306861c74a87 100644 --- a/drivers/clk/renesas/Makefile +++ b/drivers/clk/renesas/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_CLK_R8A7792) += r8a7792-cpg-mssr.o obj-$(CONFIG_CLK_R8A7794) += r8a7794-cpg-mssr.o obj-$(CONFIG_CLK_R8A7795) += r8a7795-cpg-mssr.o obj-$(CONFIG_CLK_R8A7796) += r8a7796-cpg-mssr.o +obj-$(CONFIG_CLK_R8A77970) += r8a77970-cpg-mssr.o obj-$(CONFIG_CLK_R8A77995) += r8a77995-cpg-mssr.o obj-$(CONFIG_CLK_SH73A0) += clk-sh73a0.o diff --git a/drivers/clk/renesas/r8a77970-cpg-mssr.c b/drivers/clk/renesas/r8a77970-cpg-mssr.c new file mode 100644 index 000000000000..72f98527473a --- /dev/null +++ b/drivers/clk/renesas/r8a77970-cpg-mssr.c @@ -0,0 +1,199 @@ +/* + * r8a77970 Clock Pulse Generator / Module Standby and Software Reset + * + * Copyright (C) 2017 Cogent Embedded Inc. + * + * Based on r8a7795-cpg-mssr.c + * + * Copyright (C) 2015 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include +#include +#include +#include + +#include + +#include "renesas-cpg-mssr.h" +#include "rcar-gen3-cpg.h" + +enum clk_ids { + /* Core Clock Outputs exported to DT */ + LAST_DT_CORE_CLK = R8A77970_CLK_OSC, + + /* External Input Clocks */ + CLK_EXTAL, + CLK_EXTALR, + + /* Internal Core Clocks */ + CLK_MAIN, + CLK_PLL0, + CLK_PLL1, + CLK_PLL3, + CLK_PLL1_DIV2, + CLK_PLL1_DIV4, + + /* Module Clocks */ + MOD_CLK_BASE +}; + +static const struct cpg_core_clk r8a77970_core_clks[] __initconst = { + /* External Clock Inputs */ + DEF_INPUT("extal", CLK_EXTAL), + DEF_INPUT("extalr", CLK_EXTALR), + + /* Internal Core Clocks */ + DEF_BASE(".main", CLK_MAIN, CLK_TYPE_GEN3_MAIN, CLK_EXTAL), + DEF_BASE(".pll0", CLK_PLL0, CLK_TYPE_GEN3_PLL0, CLK_MAIN), + DEF_BASE(".pll1", CLK_PLL1, CLK_TYPE_GEN3_PLL1, CLK_MAIN), + DEF_BASE(".pll3", CLK_PLL3, CLK_TYPE_GEN3_PLL3, CLK_MAIN), + + DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2, CLK_PLL1, 2, 1), + DEF_FIXED(".pll1_div4", CLK_PLL1_DIV4, CLK_PLL1_DIV2, 2, 1), + + /* Core Clock Outputs */ + DEF_FIXED("ztr", R8A77970_CLK_ZTR, CLK_PLL1_DIV2, 6, 1), + DEF_FIXED("ztrd2", R8A77970_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1), + DEF_FIXED("zt", R8A77970_CLK_ZT, CLK_PLL1_DIV2, 4, 1), + DEF_FIXED("zx", R8A77970_CLK_ZX, CLK_PLL1_DIV2, 3, 1), + DEF_FIXED("s1d1", R8A77970_CLK_S1D1, CLK_PLL1_DIV2, 4, 1), + DEF_FIXED("s1d2", R8A77970_CLK_S1D2, CLK_PLL1_DIV2, 8, 1), + DEF_FIXED("s1d4", R8A77970_CLK_S1D4, CLK_PLL1_DIV2, 16, 1), + DEF_FIXED("s2d1", R8A77970_CLK_S2D1, CLK_PLL1_DIV2, 6, 1), + DEF_FIXED("s2d2", R8A77970_CLK_S2D2, CLK_PLL1_DIV2, 12, 1), + DEF_FIXED("s2d4", R8A77970_CLK_S2D4, CLK_PLL1_DIV2, 24, 1), + + DEF_FIXED("cl", R8A77970_CLK_CL, CLK_PLL1_DIV2, 48, 1), + DEF_FIXED("cp", R8A77970_CLK_CP, CLK_EXTAL, 2, 1), + + DEF_DIV6P1("canfd", R8A77970_CLK_CANFD, CLK_PLL1_DIV4, 0x244), + DEF_DIV6P1("mso", R8A77970_CLK_MSO, CLK_PLL1_DIV4, 0x014), + DEF_DIV6P1("csi0", R8A77970_CLK_CSI0, CLK_PLL1_DIV4, 0x00c), + + DEF_FIXED("osc", R8A77970_CLK_OSC, CLK_PLL1_DIV2, 12*1024, 1), + DEF_FIXED("r", R8A77970_CLK_R, CLK_EXTALR, 1, 1), +}; + +static const struct mssr_mod_clk r8a77970_mod_clks[] __initconst = { + DEF_MOD("ivcp1e", 127, R8A77970_CLK_S2D1), + DEF_MOD("scif4", 203, R8A77970_CLK_S2D4), + DEF_MOD("scif3", 204, R8A77970_CLK_S2D4), + DEF_MOD("scif1", 206, R8A77970_CLK_S2D4), + DEF_MOD("scif0", 207, R8A77970_CLK_S2D4), + DEF_MOD("msiof3", 208, R8A77970_CLK_MSO), + DEF_MOD("msiof2", 209, R8A77970_CLK_MSO), + DEF_MOD("msiof1", 210, R8A77970_CLK_MSO), + DEF_MOD("msiof0", 211, R8A77970_CLK_MSO), + DEF_MOD("mfis", 213, R8A77970_CLK_S2D2), + DEF_MOD("sys-dmac2", 217, R8A77970_CLK_S2D1), + DEF_MOD("sys-dmac1", 218, R8A77970_CLK_S2D1), + DEF_MOD("rwdt", 402, R8A77970_CLK_R), + DEF_MOD("intc-ex", 407, R8A77970_CLK_CP), + DEF_MOD("intc-ap", 408, R8A77970_CLK_S2D1), + DEF_MOD("hscif3", 517, R8A77970_CLK_S2D1), + DEF_MOD("hscif2", 518, R8A77970_CLK_S2D1), + DEF_MOD("hscif1", 519, R8A77970_CLK_S2D1), + DEF_MOD("hscif0", 520, R8A77970_CLK_S2D1), + DEF_MOD("thermal", 522, R8A77970_CLK_CP), + DEF_MOD("pwm", 523, R8A77970_CLK_S2D4), + DEF_MOD("fcpvd0", 603, R8A77970_CLK_S2D1), + DEF_MOD("vspd0", 623, R8A77970_CLK_S2D1), + DEF_MOD("csi40", 716, R8A77970_CLK_CSI0), + DEF_MOD("du0", 724, R8A77970_CLK_S2D1), + DEF_MOD("vin3", 808, R8A77970_CLK_S2D1), + DEF_MOD("vin2", 809, R8A77970_CLK_S2D1), + DEF_MOD("vin1", 810, R8A77970_CLK_S2D1), + DEF_MOD("vin0", 811, R8A77970_CLK_S2D1), + DEF_MOD("etheravb", 812, R8A77970_CLK_S2D2), + DEF_MOD("gpio5", 907, R8A77970_CLK_CP), + DEF_MOD("gpio4", 908, R8A77970_CLK_CP), + DEF_MOD("gpio3", 909, R8A77970_CLK_CP), + DEF_MOD("gpio2", 910, R8A77970_CLK_CP), + DEF_MOD("gpio1", 911, R8A77970_CLK_CP), + DEF_MOD("gpio0", 912, R8A77970_CLK_CP), + DEF_MOD("can-fd", 914, R8A77970_CLK_S2D2), + DEF_MOD("i2c4", 927, R8A77970_CLK_S2D2), + DEF_MOD("i2c3", 928, R8A77970_CLK_S2D2), + DEF_MOD("i2c2", 929, R8A77970_CLK_S2D2), + DEF_MOD("i2c1", 930, R8A77970_CLK_S2D2), + DEF_MOD("i2c0", 931, R8A77970_CLK_S2D2), +}; + +static const unsigned int r8a77970_crit_mod_clks[] __initconst = { + MOD_CLK_ID(408), /* INTC-AP (GIC) */ +}; + + +/* + * CPG Clock Data + */ + +/* + * MD EXTAL PLL0 PLL1 PLL3 + * 14 13 19 (MHz) + *------------------------------------------------- + * 0 0 0 16.66 x 1 x192 x192 x96 + * 0 0 1 16.66 x 1 x192 x192 x80 + * 0 1 0 20 x 1 x160 x160 x80 + * 0 1 1 20 x 1 x160 x160 x66 + * 1 0 0 27 / 2 x236 x236 x118 + * 1 0 1 27 / 2 x236 x236 x98 + * 1 1 0 33.33 / 2 x192 x192 x96 + * 1 1 1 33.33 / 2 x192 x192 x80 + */ +#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 12) | \ + (((md) & BIT(13)) >> 12) | \ + (((md) & BIT(19)) >> 19)) + +static const struct rcar_gen3_cpg_pll_config cpg_pll_configs[8] __initconst = { + /* EXTAL div PLL1 mult/div PLL3 mult/div */ + { 1, 192, 1, 96, 1, }, + { 1, 192, 1, 80, 1, }, + { 1, 160, 1, 80, 1, }, + { 1, 160, 1, 66, 1, }, + { 2, 236, 1, 118, 1, }, + { 2, 236, 1, 98, 1, }, + { 2, 192, 1, 96, 1, }, + { 2, 192, 1, 80, 1, }, +}; + +static int __init r8a77970_cpg_mssr_init(struct device *dev) +{ + const struct rcar_gen3_cpg_pll_config *cpg_pll_config; + u32 cpg_mode; + int error; + + error = rcar_rst_read_mode_pins(&cpg_mode); + if (error) + return error; + + cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)]; + + return rcar_gen3_cpg_init(cpg_pll_config, CLK_EXTALR, cpg_mode); +} + +const struct cpg_mssr_info r8a77970_cpg_mssr_info __initconst = { + /* Core Clocks */ + .core_clks = r8a77970_core_clks, + .num_core_clks = ARRAY_SIZE(r8a77970_core_clks), + .last_dt_core_clk = LAST_DT_CORE_CLK, + .num_total_core_clks = MOD_CLK_BASE, + + /* Module Clocks */ + .mod_clks = r8a77970_mod_clks, + .num_mod_clks = ARRAY_SIZE(r8a77970_mod_clks), + .num_hw_mod_clks = 12 * 32, + + /* Critical Module Clocks */ + .crit_mod_clks = r8a77970_crit_mod_clks, + .num_crit_mod_clks = ARRAY_SIZE(r8a77970_crit_mod_clks), + + /* Callbacks */ + .init = r8a77970_cpg_mssr_init, + .cpg_clk_register = rcar_gen3_cpg_clk_register, +}; diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c index e580a5e6346c..1779b0cc7a2a 100644 --- a/drivers/clk/renesas/renesas-cpg-mssr.c +++ b/drivers/clk/renesas/renesas-cpg-mssr.c @@ -680,6 +680,12 @@ static const struct of_device_id cpg_mssr_match[] = { .data = &r8a7796_cpg_mssr_info, }, #endif +#ifdef CONFIG_CLK_R8A77970 + { + .compatible = "renesas,r8a77970-cpg-mssr", + .data = &r8a77970_cpg_mssr_info, + }, +#endif #ifdef CONFIG_CLK_R8A77995 { .compatible = "renesas,r8a77995-cpg-mssr", diff --git a/drivers/clk/renesas/renesas-cpg-mssr.h b/drivers/clk/renesas/renesas-cpg-mssr.h index 94b9071d1061..66528ce3eb37 100644 --- a/drivers/clk/renesas/renesas-cpg-mssr.h +++ b/drivers/clk/renesas/renesas-cpg-mssr.h @@ -138,6 +138,7 @@ extern const struct cpg_mssr_info r8a7792_cpg_mssr_info; extern const struct cpg_mssr_info r8a7794_cpg_mssr_info; extern const struct cpg_mssr_info r8a7795_cpg_mssr_info; extern const struct cpg_mssr_info r8a7796_cpg_mssr_info; +extern const struct cpg_mssr_info r8a77970_cpg_mssr_info; extern const struct cpg_mssr_info r8a77995_cpg_mssr_info; -- cgit v1.2.3 From 8ca8ac1024841781f544427b7ca5684e4c5637a9 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 11 Oct 2017 11:25:12 +0200 Subject: clk: samsung: Add dt bindings for Exynos4412 ISP clock controller Some registers for the Exynos 4412 ISP (Camera subsystem) clocks are located in the ISP power domain. Because those registers are also located in a different memory region than the main clock controller, support for them can be provided by a separate clock controller. Signed-off-by: Marek Szyprowski Acked-by: Krzysztof Kozlowski Acked-by: Rob Herring Signed-off-by: Sylwester Nawrocki --- .../devicetree/bindings/clock/exynos4-clock.txt | 43 ++++++++++++++++++++++ include/dt-bindings/clock/exynos4.h | 35 ++++++++++++++++++ 2 files changed, 78 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt index f5a5b19ed3b2..bc61c952cb0b 100644 --- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt @@ -41,3 +41,46 @@ Example 2: UART controller node that consumes the clock generated by the clock clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; }; + +Exynos4412 SoC contains some additional clocks for FIMC-ISP (Camera ISP) +subsystem. Registers for those clocks are located in the ISP power domain. +Because those registers are also located in a different memory region than +the main clock controller, a separate clock controller has to be defined for +handling them. + +Required Properties: + +- compatible: should be "samsung,exynos4412-isp-clock". + +- reg: physical base address of the ISP clock controller and length of memory + mapped region. + +- #clock-cells: should be 1. + +- clocks: list of the clock controller input clock identifiers, + from common clock bindings, should point to CLK_ACLK200 and + CLK_ACLK400_MCUISP clocks from the main clock controller. + +- clock-names: list of the clock controller input clock names, + as described in clock-bindings.txt, should be "aclk200" and + "aclk400_mcuisp". + +- power-domains: a phandle to ISP power domain node as described by + generic PM domain bindings. + +Example 3: The clock controllers bindings for Exynos4412 SoCs. + + clock: clock-controller@10030000 { + compatible = "samsung,exynos4412-clock"; + reg = <0x10030000 0x18000>; + #clock-cells = <1>; + }; + + isp_clock: clock-controller@10048000 { + compatible = "samsung,exynos4412-isp-clock"; + reg = <0x10048000 0x1000>; + #clock-cells = <1>; + power-domains = <&pd_isp>; + clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>; + clock-names = "aclk200", "aclk400_mcuisp"; + }; diff --git a/include/dt-bindings/clock/exynos4.h b/include/dt-bindings/clock/exynos4.h index c40111f36d5e..e9f9d400c322 100644 --- a/include/dt-bindings/clock/exynos4.h +++ b/include/dt-bindings/clock/exynos4.h @@ -272,4 +272,39 @@ /* must be greater than maximal clock id */ #define CLK_NR_CLKS 461 +/* Exynos4x12 ISP clocks */ +#define CLK_ISP_FIMC_ISP 1 +#define CLK_ISP_FIMC_DRC 2 +#define CLK_ISP_FIMC_FD 3 +#define CLK_ISP_FIMC_LITE0 4 +#define CLK_ISP_FIMC_LITE1 5 +#define CLK_ISP_MCUISP 6 +#define CLK_ISP_GICISP 7 +#define CLK_ISP_SMMU_ISP 8 +#define CLK_ISP_SMMU_DRC 9 +#define CLK_ISP_SMMU_FD 10 +#define CLK_ISP_SMMU_LITE0 11 +#define CLK_ISP_SMMU_LITE1 12 +#define CLK_ISP_PPMUISPMX 13 +#define CLK_ISP_PPMUISPX 14 +#define CLK_ISP_MCUCTL_ISP 15 +#define CLK_ISP_MPWM_ISP 16 +#define CLK_ISP_I2C0_ISP 17 +#define CLK_ISP_I2C1_ISP 18 +#define CLK_ISP_MTCADC_ISP 19 +#define CLK_ISP_PWM_ISP 20 +#define CLK_ISP_WDT_ISP 21 +#define CLK_ISP_UART_ISP 22 +#define CLK_ISP_ASYNCAXIM 23 +#define CLK_ISP_SMMU_ISPCX 24 +#define CLK_ISP_SPI0_ISP 25 +#define CLK_ISP_SPI1_ISP 26 + +#define CLK_ISP_DIV_ISP0 27 +#define CLK_ISP_DIV_ISP1 28 +#define CLK_ISP_DIV_MCUISP0 29 +#define CLK_ISP_DIV_MCUISP1 30 + +#define CLK_NR_ISP_CLKS 31 + #endif /* _DT_BINDINGS_CLOCK_EXYNOS_4_H */ -- cgit v1.2.3 From d454cecc637b90996ab15b2e61a6cc51b7e1463c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 12 Oct 2017 10:54:22 +0200 Subject: clk: renesas: rz: clk-rz is meant for RZ/A1 The RZ family of Renesas SoCs has several different subfamilies (RZ/A, RZ/G, RZ/N, and RZ/T). Clarify that the renesas,rz-cpg-clocks DT bindings and clk-rz driver apply to RZ/A1 only. Signed-off-by: Geert Uytterhoeven Reviewed-by: Simon Horman Acked-by: Rob Herring --- Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt | 4 ++-- drivers/clk/renesas/clk-rz.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt index bb5d942075fb..8ff3e2774ed8 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt @@ -1,6 +1,6 @@ -* Renesas RZ Clock Pulse Generator (CPG) +* Renesas RZ/A1 Clock Pulse Generator (CPG) -The CPG generates core clocks for the RZ SoCs. It includes the PLL, variable +The CPG generates core clocks for the RZ/A1 SoCs. It includes the PLL, variable CPU and GPU clocks, and several fixed ratio dividers. The CPG also provides a Clock Domain for SoC devices, in combination with the CPG Module Stop (MSTP) Clocks. diff --git a/drivers/clk/renesas/clk-rz.c b/drivers/clk/renesas/clk-rz.c index 5adb934326d1..127c58135c8f 100644 --- a/drivers/clk/renesas/clk-rz.c +++ b/drivers/clk/renesas/clk-rz.c @@ -1,5 +1,5 @@ /* - * rz Core CPG Clocks + * RZ/A1 Core CPG Clocks * * Copyright (C) 2013 Ideas On Board SPRL * Copyright (C) 2014 Wolfram Sang, Sang Engineering -- cgit v1.2.3 From 5e70ca8753c8d9749d206a4fdb14f22a6ba1d893 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 13 Oct 2017 13:26:35 +0200 Subject: clk: qcom: Elaborate on "active" clocks in the RPM clock bindings The concept of "active" clocks is just explained in a bried comment in the device driver, let's explain it a bit more in the device tree bindings so everyone understands this. Cc: devicetree@vger.kernel.org Acked-by: Rob Herring Signed-off-by: Linus Walleij Signed-off-by: Stephen Boyd --- Documentation/devicetree/bindings/clock/qcom,rpmcc.txt | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt index a7235e9e1c97..32c6e9ce64c3 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt @@ -16,6 +16,14 @@ Required properties : - #clock-cells : shall contain 1 +The clock enumerators are defined in +and come in pairs: FOO_CLK followed by FOO_A_CLK. The latter clock +is an "active" clock, which means that the consumer only care that the +clock is available when the apps CPU subsystem is active, i.e. not +suspended or in deep idle. If it is important that the clock keeps running +during system suspend, you need to specify the non-active clock, the one +not containing *_A_* in the enumerator name. + Example: smd { compatible = "qcom,smd"; -- cgit v1.2.3 From 856e6bb91e198c4fb0ca2f4f3ee0e7f660b3e0ca Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 13 Oct 2017 13:59:16 +0200 Subject: clk: qcom: Update DT bindings for the MSM8660/APQ8060 RPMCC These compatible strings need to be added to extend support for the RPM CC to cover MSM8660/APQ8060. We also need to add enumberators to the include file for a few clocks that were missing. Cc: devicetree@vger.kernel.org Acked-by: Rob Herring Signed-off-by: Linus Walleij Signed-off-by: Stephen Boyd --- Documentation/devicetree/bindings/clock/qcom,rpmcc.txt | 2 ++ include/dt-bindings/clock/qcom,rpmcc.h | 3 +++ 2 files changed, 5 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt index 32c6e9ce64c3..833a89f06ae0 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt @@ -10,6 +10,8 @@ Required properties : - compatible : shall contain only one of the following. The generic compatible "qcom,rpmcc" should be also included. + "qcom,rpmcc-msm8660", "qcom,rpmcc" + "qcom,rpmcc-apq8060", "qcom,rpmcc" "qcom,rpmcc-msm8916", "qcom,rpmcc" "qcom,rpmcc-msm8974", "qcom,rpmcc" "qcom,rpmcc-apq8064", "qcom,rpmcc" diff --git a/include/dt-bindings/clock/qcom,rpmcc.h b/include/dt-bindings/clock/qcom,rpmcc.h index 96b63c00249e..29dad206a74b 100644 --- a/include/dt-bindings/clock/qcom,rpmcc.h +++ b/include/dt-bindings/clock/qcom,rpmcc.h @@ -37,6 +37,9 @@ #define RPM_SYS_FABRIC_A_CLK 19 #define RPM_SFPB_CLK 20 #define RPM_SFPB_A_CLK 21 +#define RPM_SMI_CLK 22 +#define RPM_SMI_A_CLK 23 +#define RPM_PLL4_CLK 24 /* SMD RPM clocks */ #define RPM_SMD_XO_CLK_SRC 0 -- cgit v1.2.3 From 7066fdd0d7427f1ba455d186e75213c442c9663b Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Tue, 10 Oct 2017 14:27:13 +0530 Subject: clk: qcom: clk-smd-rpm: add msm8996 rpmclks Add all RPM controlled clocks on msm8996 platform [srini: Fixed various issues with offsets and made names specific to msm8996] Signed-off-by: Srinivas Kandagatla Signed-off-by: Rajendra Nayak Acked-by: Rob Herring Acked-by: Bjorn Andersson Signed-off-by: Stephen Boyd --- .../devicetree/bindings/clock/qcom,rpmcc.txt | 1 + drivers/clk/qcom/clk-smd-rpm.c | 82 ++++++++++++++++++++++ include/dt-bindings/clock/qcom,rpmcc.h | 14 ++++ include/linux/soc/qcom/smd-rpm.h | 4 ++ 4 files changed, 101 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt index 833a89f06ae0..4491d1c104aa 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt @@ -15,6 +15,7 @@ Required properties : "qcom,rpmcc-msm8916", "qcom,rpmcc" "qcom,rpmcc-msm8974", "qcom,rpmcc" "qcom,rpmcc-apq8064", "qcom,rpmcc" + "qcom,rpmcc-msm8996", "qcom,rpmcc" - #clock-cells : shall contain 1 diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c index cc03d5508627..c26d9007bfc4 100644 --- a/drivers/clk/qcom/clk-smd-rpm.c +++ b/drivers/clk/qcom/clk-smd-rpm.c @@ -530,9 +530,91 @@ static const struct rpm_smd_clk_desc rpm_clk_msm8974 = { .clks = msm8974_clks, .num_clks = ARRAY_SIZE(msm8974_clks), }; + +/* msm8996 */ +DEFINE_CLK_SMD_RPM(msm8996, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0); +DEFINE_CLK_SMD_RPM(msm8996, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1); +DEFINE_CLK_SMD_RPM(msm8996, cnoc_clk, cnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2); +DEFINE_CLK_SMD_RPM(msm8996, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0); +DEFINE_CLK_SMD_RPM(msm8996, mmssnoc_axi_rpm_clk, mmssnoc_axi_rpm_a_clk, + QCOM_SMD_RPM_MMAXI_CLK, 0); +DEFINE_CLK_SMD_RPM(msm8996, ipa_clk, ipa_a_clk, QCOM_SMD_RPM_IPA_CLK, 0); +DEFINE_CLK_SMD_RPM(msm8996, ce1_clk, ce1_a_clk, QCOM_SMD_RPM_CE_CLK, 0); +DEFINE_CLK_SMD_RPM_BRANCH(msm8996, aggre1_noc_clk, aggre1_noc_a_clk, + QCOM_SMD_RPM_AGGR_CLK, 1, 1000); +DEFINE_CLK_SMD_RPM_BRANCH(msm8996, aggre2_noc_clk, aggre2_noc_a_clk, + QCOM_SMD_RPM_AGGR_CLK, 2, 1000); +DEFINE_CLK_SMD_RPM_QDSS(msm8996, qdss_clk, qdss_a_clk, + QCOM_SMD_RPM_MISC_CLK, 1); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8996, bb_clk1, bb_clk1_a, 1); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8996, bb_clk2, bb_clk2_a, 2); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8996, rf_clk1, rf_clk1_a, 4); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8996, rf_clk2, rf_clk2_a, 5); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8996, ln_bb_clk, ln_bb_a_clk, 8); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8996, div_clk1, div_clk1_a, 0xb); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8996, div_clk2, div_clk2_a, 0xc); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8996, div_clk3, div_clk3_a, 0xd); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8996, bb_clk1_pin, bb_clk1_a_pin, 1); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8996, bb_clk2_pin, bb_clk2_a_pin, 2); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8996, rf_clk1_pin, rf_clk1_a_pin, 4); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8996, rf_clk2_pin, rf_clk2_a_pin, 5); + +static struct clk_smd_rpm *msm8996_clks[] = { + [RPM_SMD_PCNOC_CLK] = &msm8996_pcnoc_clk, + [RPM_SMD_PCNOC_A_CLK] = &msm8996_pcnoc_a_clk, + [RPM_SMD_SNOC_CLK] = &msm8996_snoc_clk, + [RPM_SMD_SNOC_A_CLK] = &msm8996_snoc_a_clk, + [RPM_SMD_CNOC_CLK] = &msm8996_cnoc_clk, + [RPM_SMD_CNOC_A_CLK] = &msm8996_cnoc_a_clk, + [RPM_SMD_BIMC_CLK] = &msm8996_bimc_clk, + [RPM_SMD_BIMC_A_CLK] = &msm8996_bimc_a_clk, + [RPM_SMD_MMAXI_CLK] = &msm8996_mmssnoc_axi_rpm_clk, + [RPM_SMD_MMAXI_A_CLK] = &msm8996_mmssnoc_axi_rpm_a_clk, + [RPM_SMD_IPA_CLK] = &msm8996_ipa_clk, + [RPM_SMD_IPA_A_CLK] = &msm8996_ipa_a_clk, + [RPM_SMD_CE1_CLK] = &msm8996_ce1_clk, + [RPM_SMD_CE1_A_CLK] = &msm8996_ce1_a_clk, + [RPM_SMD_AGGR1_NOC_CLK] = &msm8996_aggre1_noc_clk, + [RPM_SMD_AGGR1_NOC_A_CLK] = &msm8996_aggre1_noc_a_clk, + [RPM_SMD_AGGR2_NOC_CLK] = &msm8996_aggre2_noc_clk, + [RPM_SMD_AGGR2_NOC_A_CLK] = &msm8996_aggre2_noc_a_clk, + [RPM_SMD_QDSS_CLK] = &msm8996_qdss_clk, + [RPM_SMD_QDSS_A_CLK] = &msm8996_qdss_a_clk, + [RPM_SMD_BB_CLK1] = &msm8996_bb_clk1, + [RPM_SMD_BB_CLK1_A] = &msm8996_bb_clk1_a, + [RPM_SMD_BB_CLK2] = &msm8996_bb_clk2, + [RPM_SMD_BB_CLK2_A] = &msm8996_bb_clk2_a, + [RPM_SMD_RF_CLK1] = &msm8996_rf_clk1, + [RPM_SMD_RF_CLK1_A] = &msm8996_rf_clk1_a, + [RPM_SMD_RF_CLK2] = &msm8996_rf_clk2, + [RPM_SMD_RF_CLK2_A] = &msm8996_rf_clk2_a, + [RPM_SMD_LN_BB_CLK] = &msm8996_ln_bb_clk, + [RPM_SMD_LN_BB_A_CLK] = &msm8996_ln_bb_a_clk, + [RPM_SMD_DIV_CLK1] = &msm8996_div_clk1, + [RPM_SMD_DIV_A_CLK1] = &msm8996_div_clk1_a, + [RPM_SMD_DIV_CLK2] = &msm8996_div_clk2, + [RPM_SMD_DIV_A_CLK2] = &msm8996_div_clk2_a, + [RPM_SMD_DIV_CLK3] = &msm8996_div_clk3, + [RPM_SMD_DIV_A_CLK3] = &msm8996_div_clk3_a, + [RPM_SMD_BB_CLK1_PIN] = &msm8996_bb_clk1_pin, + [RPM_SMD_BB_CLK1_A_PIN] = &msm8996_bb_clk1_a_pin, + [RPM_SMD_BB_CLK2_PIN] = &msm8996_bb_clk2_pin, + [RPM_SMD_BB_CLK2_A_PIN] = &msm8996_bb_clk2_a_pin, + [RPM_SMD_RF_CLK1_PIN] = &msm8996_rf_clk1_pin, + [RPM_SMD_RF_CLK1_A_PIN] = &msm8996_rf_clk1_a_pin, + [RPM_SMD_RF_CLK2_PIN] = &msm8996_rf_clk2_pin, + [RPM_SMD_RF_CLK2_A_PIN] = &msm8996_rf_clk2_a_pin, +}; + +static const struct rpm_smd_clk_desc rpm_clk_msm8996 = { + .clks = msm8996_clks, + .num_clks = ARRAY_SIZE(msm8996_clks), +}; + static const struct of_device_id rpm_smd_clk_match_table[] = { { .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 }, { .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 }, + { .compatible = "qcom,rpmcc-msm8996", .data = &rpm_clk_msm8996 }, { } }; MODULE_DEVICE_TABLE(of, rpm_smd_clk_match_table); diff --git a/include/dt-bindings/clock/qcom,rpmcc.h b/include/dt-bindings/clock/qcom,rpmcc.h index 29dad206a74b..b8337a5fa347 100644 --- a/include/dt-bindings/clock/qcom,rpmcc.h +++ b/include/dt-bindings/clock/qcom,rpmcc.h @@ -104,5 +104,19 @@ #define RPM_SMD_CXO_A1_A_PIN 59 #define RPM_SMD_CXO_A2_PIN 60 #define RPM_SMD_CXO_A2_A_PIN 61 +#define RPM_SMD_AGGR1_NOC_CLK 62 +#define RPM_SMD_AGGR1_NOC_A_CLK 63 +#define RPM_SMD_AGGR2_NOC_CLK 64 +#define RPM_SMD_AGGR2_NOC_A_CLK 65 +#define RPM_SMD_MMAXI_CLK 66 +#define RPM_SMD_MMAXI_A_CLK 67 +#define RPM_SMD_IPA_CLK 68 +#define RPM_SMD_IPA_A_CLK 69 +#define RPM_SMD_CE1_CLK 70 +#define RPM_SMD_CE1_A_CLK 71 +#define RPM_SMD_DIV_CLK3 72 +#define RPM_SMD_DIV_A_CLK3 73 +#define RPM_SMD_LN_BB_CLK 74 +#define RPM_SMD_LN_BB_A_CLK 75 #endif diff --git a/include/linux/soc/qcom/smd-rpm.h b/include/linux/soc/qcom/smd-rpm.h index 2a53dcaeeeed..ebdabd669d93 100644 --- a/include/linux/soc/qcom/smd-rpm.h +++ b/include/linux/soc/qcom/smd-rpm.h @@ -26,6 +26,10 @@ struct qcom_smd_rpm; #define QCOM_SMD_RPM_SMPB 0x62706d73 #define QCOM_SMD_RPM_SPDM 0x63707362 #define QCOM_SMD_RPM_VSA 0x00617376 +#define QCOM_SMD_RPM_MMAXI_CLK 0x69786d6d +#define QCOM_SMD_RPM_IPA_CLK 0x617069 +#define QCOM_SMD_RPM_CE_CLK 0x6563 +#define QCOM_SMD_RPM_AGGR_CLK 0x72676761 int qcom_rpm_smd_write(struct qcom_smd_rpm *rpm, int state, -- cgit v1.2.3 From eb522df40e41915210856f1d654e0c31650cb526 Mon Sep 17 00:00:00 2001 From: "weiyi.lu@mediatek.com" Date: Mon, 23 Oct 2017 12:10:32 +0800 Subject: dt-bindings: ARM: Mediatek: Document bindings for MT2712 This patch adds the binding documentation for apmixedsys, bdpsys, imgsys, imgsys, infracfg, mcucfg, mfgcfg, mmsys, pericfg, topckgen, vdecsys and vencsys for Mediatek MT2712. Acked-by: Rob Herring Signed-off-by: Weiyi Lu Signed-off-by: Stephen Boyd --- .../bindings/arm/mediatek/mediatek,apmixedsys.txt | 1 + .../bindings/arm/mediatek/mediatek,bdpsys.txt | 1 + .../bindings/arm/mediatek/mediatek,imgsys.txt | 1 + .../bindings/arm/mediatek/mediatek,infracfg.txt | 1 + .../bindings/arm/mediatek/mediatek,jpgdecsys.txt | 22 ++++++++++++++++++++++ .../bindings/arm/mediatek/mediatek,mcucfg.txt | 22 ++++++++++++++++++++++ .../bindings/arm/mediatek/mediatek,mfgcfg.txt | 22 ++++++++++++++++++++++ .../bindings/arm/mediatek/mediatek,mmsys.txt | 1 + .../bindings/arm/mediatek/mediatek,pericfg.txt | 1 + .../bindings/arm/mediatek/mediatek,topckgen.txt | 1 + .../bindings/arm/mediatek/mediatek,vdecsys.txt | 1 + .../bindings/arm/mediatek/mediatek,vencsys.txt | 1 + 12 files changed, 75 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt index cd977db7630c..19fc116346d6 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-apmixedsys" + - "mediatek,mt2712-apmixedsys", "syscon" - "mediatek,mt6797-apmixedsys" - "mediatek,mt8135-apmixedsys" - "mediatek,mt8173-apmixedsys" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt index 4137196dd686..4010e37c53a0 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-bdpsys", "syscon" + - "mediatek,mt2712-bdpsys", "syscon" - #clock-cells: Must be 1 The bdpsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt index 047b11ae5f45..868bd51a98be 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-imgsys", "syscon" + - "mediatek,mt2712-imgsys", "syscon" - "mediatek,mt6797-imgsys", "syscon" - "mediatek,mt8173-imgsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt index 58d58e2006b8..a3430cd96d0f 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-infracfg", "syscon" + - "mediatek,mt2712-infracfg", "syscon" - "mediatek,mt6797-infracfg", "syscon" - "mediatek,mt8135-infracfg", "syscon" - "mediatek,mt8173-infracfg", "syscon" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt new file mode 100644 index 000000000000..2df799cd06a7 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt @@ -0,0 +1,22 @@ +Mediatek jpgdecsys controller +============================ + +The Mediatek jpgdecsys controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt2712-jpgdecsys", "syscon" +- #clock-cells: Must be 1 + +The jpgdecsys controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +jpgdecsys: syscon@19000000 { + compatible = "mediatek,mt2712-jpgdecsys", "syscon"; + reg = <0 0x19000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt new file mode 100644 index 000000000000..b8fb03f3613e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt @@ -0,0 +1,22 @@ +Mediatek mcucfg controller +============================ + +The Mediatek mcucfg controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt2712-mcucfg", "syscon" +- #clock-cells: Must be 1 + +The mcucfg controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +mcucfg: syscon@10220000 { + compatible = "mediatek,mt2712-mcucfg", "syscon"; + reg = <0 0x10220000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt new file mode 100644 index 000000000000..859e67b416d5 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt @@ -0,0 +1,22 @@ +Mediatek mfgcfg controller +============================ + +The Mediatek mfgcfg controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt2712-mfgcfg", "syscon" +- #clock-cells: Must be 1 + +The mfgcfg controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +mfgcfg: syscon@13000000 { + compatible = "mediatek,mt2712-mfgcfg", "syscon"; + reg = <0 0x13000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt index 70529e0b58e9..4eb8bbe15c01 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-mmsys", "syscon" + - "mediatek,mt2712-mmsys", "syscon" - "mediatek,mt6797-mmsys", "syscon" - "mediatek,mt8173-mmsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt index e494366782aa..d9f092eb3550 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-pericfg", "syscon" + - "mediatek,mt2712-pericfg", "syscon" - "mediatek,mt8135-pericfg", "syscon" - "mediatek,mt8173-pericfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt index ec93ecbb9f3c..2024fc909d69 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-topckgen" + - "mediatek,mt2712-topckgen", "syscon" - "mediatek,mt6797-topckgen" - "mediatek,mt8135-topckgen" - "mediatek,mt8173-topckgen" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt index d150104f928a..ea40d05089f8 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-vdecsys", "syscon" + - "mediatek,mt2712-vdecsys", "syscon" - "mediatek,mt6797-vdecsys", "syscon" - "mediatek,mt8173-vdecsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt index 8a93be643647..851545357e94 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt @@ -6,6 +6,7 @@ The Mediatek vencsys controller provides various clocks to the system. Required Properties: - compatible: Should be one of: + - "mediatek,mt2712-vencsys", "syscon" - "mediatek,mt6797-vencsys", "syscon" - "mediatek,mt8173-vencsys", "syscon" - #clock-cells: Must be 1 -- cgit v1.2.3 From 808ecf4ad087f80c2eee99af67549f05d5315694 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Thu, 5 Oct 2017 11:50:22 +0800 Subject: dt-bindings: clock: mediatek: document clk bindings for MediaTek MT7622 SoC This patch adds the binding documentation for apmixedsys, ethsys, hifsys, infracfg, pericfg, topckgen and audsys for MT7622. Signed-off-by: Chen Zhong Signed-off-by: Sean Wang Acked-by: Rob Herring Signed-off-by: Stephen Boyd --- .../bindings/arm/mediatek/mediatek,apmixedsys.txt | 1 + .../bindings/arm/mediatek/mediatek,audsys.txt | 22 ++++++++++++++++++++++ .../bindings/arm/mediatek/mediatek,ethsys.txt | 1 + .../bindings/arm/mediatek/mediatek,hifsys.txt | 1 + .../bindings/arm/mediatek/mediatek,infracfg.txt | 1 + .../bindings/arm/mediatek/mediatek,pciesys.txt | 22 ++++++++++++++++++++++ .../bindings/arm/mediatek/mediatek,pericfg.txt | 1 + .../bindings/arm/mediatek/mediatek,sgmiisys.txt | 22 ++++++++++++++++++++++ .../bindings/arm/mediatek/mediatek,ssusbsys.txt | 22 ++++++++++++++++++++++ .../bindings/arm/mediatek/mediatek,topckgen.txt | 1 + 10 files changed, 94 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt index 19fc116346d6..b404d592ce58 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt @@ -9,6 +9,7 @@ Required Properties: - "mediatek,mt2701-apmixedsys" - "mediatek,mt2712-apmixedsys", "syscon" - "mediatek,mt6797-apmixedsys" + - "mediatek,mt7622-apmixedsys" - "mediatek,mt8135-apmixedsys" - "mediatek,mt8173-apmixedsys" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt new file mode 100644 index 000000000000..9b8f578d5e19 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt @@ -0,0 +1,22 @@ +MediaTek AUDSYS controller +============================ + +The MediaTek AUDSYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt7622-audsys", "syscon" +- #clock-cells: Must be 1 + +The AUDSYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +audsys: audsys@11220000 { + compatible = "mediatek,mt7622-audsys", "syscon"; + reg = <0 0x11220000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt index 768f3a5bc055..7aa3fa167668 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-ethsys", "syscon" + - "mediatek,mt7622-ethsys", "syscon" - #clock-cells: Must be 1 The ethsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt index beed7b594cea..f5629d64cef2 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-hifsys", "syscon" + - "mediatek,mt7622-hifsys", "syscon" - #clock-cells: Must be 1 The hifsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt index a3430cd96d0f..566f153f9f83 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt @@ -10,6 +10,7 @@ Required Properties: - "mediatek,mt2701-infracfg", "syscon" - "mediatek,mt2712-infracfg", "syscon" - "mediatek,mt6797-infracfg", "syscon" + - "mediatek,mt7622-infracfg", "syscon" - "mediatek,mt8135-infracfg", "syscon" - "mediatek,mt8173-infracfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt new file mode 100644 index 000000000000..d5d5f1227665 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt @@ -0,0 +1,22 @@ +MediaTek PCIESYS controller +============================ + +The MediaTek PCIESYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt7622-pciesys", "syscon" +- #clock-cells: Must be 1 + +The PCIESYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +pciesys: pciesys@1a100800 { + compatible = "mediatek,mt7622-pciesys", "syscon"; + reg = <0 0x1a100800 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt index d9f092eb3550..fb58ca8c2770 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt @@ -9,6 +9,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-pericfg", "syscon" - "mediatek,mt2712-pericfg", "syscon" + - "mediatek,mt7622-pericfg", "syscon" - "mediatek,mt8135-pericfg", "syscon" - "mediatek,mt8173-pericfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt new file mode 100644 index 000000000000..d113b8e741f3 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt @@ -0,0 +1,22 @@ +MediaTek SGMIISYS controller +============================ + +The MediaTek SGMIISYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt7622-sgmiisys", "syscon" +- #clock-cells: Must be 1 + +The SGMIISYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +sgmiisys: sgmiisys@1b128000 { + compatible = "mediatek,mt7622-sgmiisys", "syscon"; + reg = <0 0x1b128000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt new file mode 100644 index 000000000000..00760019da00 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt @@ -0,0 +1,22 @@ +MediaTek SSUSBSYS controller +============================ + +The MediaTek SSUSBSYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt7622-ssusbsys", "syscon" +- #clock-cells: Must be 1 + +The SSUSBSYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +ssusbsys: ssusbsys@1a000000 { + compatible = "mediatek,mt7622-ssusbsys", "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt index 2024fc909d69..24014a7e2332 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt @@ -9,6 +9,7 @@ Required Properties: - "mediatek,mt2701-topckgen" - "mediatek,mt2712-topckgen", "syscon" - "mediatek,mt6797-topckgen" + - "mediatek,mt7622-topckgen" - "mediatek,mt8135-topckgen" - "mediatek,mt8173-topckgen" - #clock-cells: Must be 1 -- cgit v1.2.3