From 1534156e999735fe0befad958e1447600c0c20e7 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Tue, 16 Jan 2018 17:35:39 +0100 Subject: i2c: mv64xxx: Fix clock resource by adding an optional bus clock On Armada 7K/8K we need to explicitly enable the bus clock. The bus clock is optional because not all the SoCs need them but at least for Armada 7K/8K it is actually mandatory. The binding documentation is updating accordingly. Signed-off-by: Gregory CLEMENT Signed-off-by: Wolfram Sang --- .../devicetree/bindings/i2c/i2c-mv64xxx.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt index 5c30026921ae..0ffe65a316ae 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt @@ -25,6 +25,15 @@ default frequency is 100kHz whenever you're using the "allwinner,sun6i-a31-i2c" compatible. + - clocks: : pointers to the reference clocks for this device, the + first one is the one used for the clock on the i2c bus, + the second one is the clock used to acces the registers + of the controller + + - clock-names : names of used clocks, mandatory if the second clock is + used, the name must be "core", and "reg" (the latter is + only for Armada 7K/8K). + Examples: i2c@11000 { @@ -42,3 +51,14 @@ For the Armada XP: interrupts = <29>; clock-frequency = <100000>; }; + +For the Armada 7040: + + i2c@701000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701000 0x20>; + interrupts = <29>; + clock-frequency = <100000>; + clock-names = "core", "reg"; + clocks = <&core_clock>, <®_clock>; + }; -- cgit v1.2.3