From 9066073c6c27994a30187abf3b674770b4088348 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 5 May 2016 14:21:39 +0530 Subject: thermal: qcom: tsens: Add a skeletal TSENS drivers TSENS is Qualcomms' thermal temperature sensor device. It supports reading temperatures from multiple thermal sensors present on various QCOM SoCs. Calibration data is generally read from a non-volatile memory (eeprom) device. Add a skeleton driver with all the necessary abstractions so a variety of qcom device families which support TSENS can add driver extensions. Also add the required device tree bindings which can be used to describe the TSENS device in DT. Signed-off-by: Rajendra Nayak Reviewed-by: Lina Iyer Signed-off-by: Eduardo Valentin Signed-off-by: Zhang Rui --- .../devicetree/bindings/thermal/qcom-tsens.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt new file mode 100644 index 000000000000..292ed89d900b --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt @@ -0,0 +1,21 @@ +* QCOM SoC Temperature Sensor (TSENS) + +Required properties: +- compatible : + - "qcom,msm8916-tsens" : For 8916 Family of SoCs + - "qcom,msm8974-tsens" : For 8974 Family of SoCs + - "qcom,msm8996-tsens" : For 8996 Family of SoCs + +- reg: Address range of the thermal registers +- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. +- Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify +nvmem cells + +Example: +tsens: thermal-sensor@900000 { + compatible = "qcom,msm8916-tsens"; + reg = <0x4a8000 0x2000>; + nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; + nvmem-cell-names = "caldata", "calsel"; + #thermal-sensor-cells = <1>; + }; -- cgit v1.2.3 From 4a7069a32c99a81950de035535b0a064dcceaeba Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 5 May 2016 14:21:42 +0530 Subject: thermal: core: export apis to get slope and offset Add apis for platform thermal drivers to query for slope and offset attributes, which might be needed for temperature calculations. Signed-off-by: Rajendra Nayak Signed-off-by: Eduardo Valentin Signed-off-by: Zhang Rui --- Documentation/thermal/sysfs-api.txt | 12 ++++++++++++ drivers/thermal/thermal_core.c | 30 ++++++++++++++++++++++++++++++ include/linux/thermal.h | 8 ++++++++ 3 files changed, 50 insertions(+) (limited to 'Documentation') diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index efc3f3d293c4..755476ea3fda 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -140,6 +140,18 @@ temperature) and throttle appropriate devices. Normally this function will not need to be called and the resource management code will ensure that the resource is freed. +1.1.7 int thermal_zone_get_slope(struct thermal_zone_device *tz) + + This interface is used to read the slope attribute value + for the thermal zone device, which might be useful for platform + drivers for temperature calculations. + +1.1.8 int thermal_zone_get_offset(struct thermal_zone_device *tz) + + This interface is used to read the offset attribute value + for the thermal zone device, which might be useful for platform + drivers for temperature calculations. + 1.2 thermal cooling device interface 1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name, void *devdata, struct thermal_cooling_device_ops *) diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index e2fc6161dded..8728cc615452 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -2069,6 +2069,36 @@ exit: } EXPORT_SYMBOL_GPL(thermal_zone_get_zone_by_name); +/** + * thermal_zone_get_slope - return the slope attribute of the thermal zone + * @tz: thermal zone device with the slope attribute + * + * Return: If the thermal zone device has a slope attribute, return it, else + * return 1. + */ +int thermal_zone_get_slope(struct thermal_zone_device *tz) +{ + if (tz && tz->tzp) + return tz->tzp->slope; + return 1; +} +EXPORT_SYMBOL_GPL(thermal_zone_get_slope); + +/** + * thermal_zone_get_offset - return the offset attribute of the thermal zone + * @tz: thermal zone device with the offset attribute + * + * Return: If the thermal zone device has a offset attribute, return it, else + * return 0. + */ +int thermal_zone_get_offset(struct thermal_zone_device *tz) +{ + if (tz && tz->tzp) + return tz->tzp->offset; + return 0; +} +EXPORT_SYMBOL_GPL(thermal_zone_get_offset); + #ifdef CONFIG_NET static const struct genl_multicast_group thermal_event_mcgrps[] = { { .name = THERMAL_GENL_MCAST_GROUP_NAME, }, diff --git a/include/linux/thermal.h b/include/linux/thermal.h index ee517bef0db0..707d7353c28b 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -435,6 +435,8 @@ thermal_of_cooling_device_register(struct device_node *np, char *, void *, void thermal_cooling_device_unregister(struct thermal_cooling_device *); struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name); int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp); +int thermal_zone_get_slope(struct thermal_zone_device *tz); +int thermal_zone_get_offset(struct thermal_zone_device *tz); int get_tz_trend(struct thermal_zone_device *, int); struct thermal_instance *get_thermal_instance(struct thermal_zone_device *, @@ -492,6 +494,12 @@ static inline struct thermal_zone_device *thermal_zone_get_zone_by_name( static inline int thermal_zone_get_temp( struct thermal_zone_device *tz, int *temp) { return -ENODEV; } +static inline int thermal_zone_get_slope( + struct thermal_zone_device *tz) +{ return -ENODEV; } +static inline int thermal_zone_get_offset( + struct thermal_zone_device *tz) +{ return -ENODEV; } static inline int get_tz_trend(struct thermal_zone_device *tz, int trip) { return -ENODEV; } static inline struct thermal_instance * -- cgit v1.2.3 From 060c034a974187e930b790957cafc5047cc30a40 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 22 Jun 2016 16:42:01 +0800 Subject: thermal: Add support for hardware-tracked trip points This adds support for hardware-tracked trip points to the device tree thermal sensor framework. The framework supports an arbitrary number of trip points. Whenever the current temperature is updated, the trip points immediately below and above the current temperature are found. A .set_trips callback is then called with the temperatures. If there is no trip point above or below the current temperature, the passed trip temperature will be -INT_MAX or INT_MAX respectively. In this callback, the driver should program the hardware such that it is notified when either of these trip points are triggered. When a trip point is triggered, the driver should call `thermal_zone_device_update' for the respective thermal zone. This will cause the trip points to be updated again. If .set_trips is not implemented, the framework behaves as before. This patch is based on an earlier version from Mikko Perttunen Signed-off-by: Sascha Hauer Signed-off-by: Caesar Wang Cc: Zhang Rui Cc: Eduardo Valentin Cc: linux-pm@vger.kernel.org Reviewed-by: Javi Merino Signed-off-by: Eduardo Valentin Signed-off-by: Zhang Rui --- Documentation/thermal/sysfs-api.txt | 7 +++++ drivers/thermal/thermal_core.c | 55 +++++++++++++++++++++++++++++++++++++ include/linux/thermal.h | 10 +++++++ 3 files changed, 72 insertions(+) (limited to 'Documentation') diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 755476ea3fda..ef473dc7f55e 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -49,6 +49,9 @@ temperature) and throttle appropriate devices. .bind: bind the thermal zone device with a thermal cooling device. .unbind: unbind the thermal zone device with a thermal cooling device. .get_temp: get the current temperature of the thermal zone. + .set_trips: set the trip points window. Whenever the current temperature + is updated, the trip points immediately below and above the + current temperature are found. .get_mode: get the current mode (enabled/disabled) of the thermal zone. - "enabled" means the kernel thermal management is enabled. - "disabled" will prevent kernel thermal driver action upon trip points @@ -95,6 +98,10 @@ temperature) and throttle appropriate devices. get_temp: a pointer to a function that reads the sensor temperature. This is mandatory callback provided by sensor driver. + set_trips: a pointer to a function that sets a + temperature window. When this window is + left the driver must inform the thermal + core via thermal_zone_device_update. get_trend: a pointer to a function that reads the sensor temperature trend. set_emul_temp: a pointer to a function that sets diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 8728cc615452..f2d55e478b2a 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -520,6 +520,56 @@ exit: } EXPORT_SYMBOL_GPL(thermal_zone_get_temp); +void thermal_zone_set_trips(struct thermal_zone_device *tz) +{ + int low = -INT_MAX; + int high = INT_MAX; + int trip_temp, hysteresis; + int i, ret; + + mutex_lock(&tz->lock); + + if (!tz->ops->set_trips || !tz->ops->get_trip_hyst) + goto exit; + + for (i = 0; i < tz->trips; i++) { + int trip_low; + + tz->ops->get_trip_temp(tz, i, &trip_temp); + tz->ops->get_trip_hyst(tz, i, &hysteresis); + + trip_low = trip_temp - hysteresis; + + if (trip_low < tz->temperature && trip_low > low) + low = trip_low; + + if (trip_temp > tz->temperature && trip_temp < high) + high = trip_temp; + } + + /* No need to change trip points */ + if (tz->prev_low_trip == low && tz->prev_high_trip == high) + goto exit; + + tz->prev_low_trip = low; + tz->prev_high_trip = high; + + dev_dbg(&tz->device, + "new temperature boundaries: %d < x < %d\n", low, high); + + /* + * Set a temperature window. When this window is left the driver + * must inform the thermal core via thermal_zone_device_update. + */ + ret = tz->ops->set_trips(tz, low, high); + if (ret) + dev_err(&tz->device, "Failed to set trips: %d\n", ret); + +exit: + mutex_unlock(&tz->lock); +} +EXPORT_SYMBOL_GPL(thermal_zone_set_trips); + static void update_temperature(struct thermal_zone_device *tz) { int temp, ret; @@ -569,6 +619,8 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) update_temperature(tz); + thermal_zone_set_trips(tz); + for (count = 0; count < tz->trips; count++) handle_thermal_trip(tz, count); } @@ -754,6 +806,9 @@ trip_point_hyst_store(struct device *dev, struct device_attribute *attr, */ ret = tz->ops->set_trip_hyst(tz, trip, temperature); + if (!ret) + thermal_zone_set_trips(tz); + return ret ? ret : count; } diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 707d7353c28b..54cdfeaaedd4 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -98,6 +98,7 @@ struct thermal_zone_device_ops { int (*unbind) (struct thermal_zone_device *, struct thermal_cooling_device *); int (*get_temp) (struct thermal_zone_device *, int *); + int (*set_trips) (struct thermal_zone_device *, int, int); int (*get_mode) (struct thermal_zone_device *, enum thermal_device_mode *); int (*set_mode) (struct thermal_zone_device *, @@ -168,6 +169,10 @@ struct thermal_attr { * @last_temperature: previous temperature read * @emul_temperature: emulated temperature when using CONFIG_THERMAL_EMULATION * @passive: 1 if you've crossed a passive trip point, 0 otherwise. + * @prev_low_trip: the low current temperature if you've crossed a passive + trip point. + * @prev_high_trip: the above current temperature if you've crossed a + passive trip point. * @forced_passive: If > 0, temperature at which to switch on all ACPI * processor cooling devices. Currently only used by the * step-wise governor. @@ -199,6 +204,8 @@ struct thermal_zone_device { int last_temperature; int emul_temperature; int passive; + int prev_low_trip; + int prev_high_trip; unsigned int forced_passive; atomic_t need_update; struct thermal_zone_device_ops *ops; @@ -426,6 +433,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int, struct thermal_cooling_device *); void thermal_zone_device_update(struct thermal_zone_device *); +void thermal_zone_set_trips(struct thermal_zone_device *); struct thermal_cooling_device *thermal_cooling_device_register(char *, void *, const struct thermal_cooling_device_ops *); @@ -477,6 +485,8 @@ static inline int thermal_zone_unbind_cooling_device( { return -ENODEV; } static inline void thermal_zone_device_update(struct thermal_zone_device *tz) { } +static inline void thermal_zone_set_trips(struct thermal_zone_device *tz) +{ } static inline struct thermal_cooling_device * thermal_cooling_device_register(char *type, void *devdata, const struct thermal_cooling_device_ops *ops) -- cgit v1.2.3 From 94c2004ef530a9692ae9f417241eb44a51723c51 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 23 Aug 2016 13:50:26 +0530 Subject: thermal: max77620: Add DT binding doc for thermal driver Maxim Semiconductor MAX77620 supports alarm interrupts when its die temperature crosses 120C and 140C. These threshold temperatures are not configurable. Add DT binding document to details out the DT property related to MAX77620 thermal functionality. Signed-off-by: Laxman Dewangan Acked-by: Rob Herring Signed-off-by: Zhang Rui --- .../bindings/thermal/max77620_thermal.txt | 70 ++++++++++++++++++++++ 1 file changed, 70 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/max77620_thermal.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/thermal/max77620_thermal.txt b/Documentation/devicetree/bindings/thermal/max77620_thermal.txt new file mode 100644 index 000000000000..323a3b3822aa --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/max77620_thermal.txt @@ -0,0 +1,70 @@ +Thermal driver for MAX77620 Power management IC from Maxim Semiconductor. + +Maxim Semiconductor MAX77620 supports alarm interrupts when its +die temperature crosses 120C and 140C. These threshold temperatures +are not configurable. Device does not provide the real temperature +of die other than just indicating whether temperature is above or +below threshold level. + +Required properties: +------------------- +#thermal-sensor-cells: Please refer + for more details. + The value must be 0. + +For more details, please refer generic thermal DT binding document +. + +Please refer for mfd DT binding +document for the MAX77620. + +Example: +-------- +#include +#include +... + +i2c@7000d000 { + spmic: max77620@3c { + compatible = "maxim,max77620"; + ::::: + #thermal-sensor-cells = <0>; + ::: + }; +}; + +cool_dev: cool-dev { + compatible = "cooling-dev"; + #cooling-cells = <2>; +}; + +thermal-zones { + PMIC-Die { + polling-delay = <0>; + polling-delay-passive = <0>; + thermal-sensors = <&spmic>; + + trips { + pmic_die_warn_temp_thresh: hot-die { + temperature = <120000>; + type = "hot"; + hysteresis = <0>; + }; + + pmic_die_cirt_temp_thresh: cirtical-die { + temperature = <140000>; + type = "critical"; + hysteresis = <0>; + }; + }; + + cooling-maps { + map0 { + trip = <&pmic_die_warn_temp_thresh>; + cooling-device = <&cool_dev THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + contribution = <100>; + }; + }; + }; +}; -- cgit v1.2.3 From 77d6e7212cd53dd93de6fab26d7ca89c8d591c07 Mon Sep 17 00:00:00 2001 From: "dawei.chien@mediatek.com" Date: Thu, 18 Aug 2016 11:50:51 +0800 Subject: dt-bindings: thermal: Add binding document for Mediatek thermal controller This adds the device tree binding documentation for the mediatek thermal controller found on Mediatek MT2701. Signed-off-by: Dawei Chien Reviewed-by: Keerthy Acked-by: Rob Herring Signed-off-by: Zhang Rui --- Documentation/devicetree/bindings/thermal/mediatek-thermal.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt index 81f9a512bc2a..e2f494d74d8a 100644 --- a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt @@ -8,7 +8,9 @@ apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS is also needed. Required properties: -- compatible: "mediatek,mt8173-thermal" +- compatible: + - "mediatek,mt8173-thermal" : For MT8173 family of SoCs + - "mediatek,mt2701-thermal" : For MT2701 family of SoCs - reg: Address range of the thermal controller - interrupts: IRQ for the thermal controller - clocks, clock-names: Clocks needed for the thermal controller. required -- cgit v1.2.3 From 44f3d4170e00debf154e778e7068e5d78c41dd82 Mon Sep 17 00:00:00 2001 From: Wei Ni Date: Wed, 11 May 2016 18:20:16 +0800 Subject: of: Add bindings of hw throttle for Tegra soctherm Add HW throttle configuration sub-node for soctherm, which is used to describe the throttle event, and worked as a cooling device. The "hot" type trip in thermal zone can be bound to this cooling device, and trigger the throttle function. Signed-off-by: Wei Ni Acked-by: Rob Herring Signed-off-by: Zhang Rui --- .../bindings/thermal/nvidia,tegra124-soctherm.txt | 121 ++++++++++++++++++++- 1 file changed, 119 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt index edebfa0a985e..b6c0ae53d4dc 100644 --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt @@ -10,8 +10,14 @@ Required properties : - compatible : For Tegra124, must contain "nvidia,tegra124-soctherm". For Tegra132, must contain "nvidia,tegra132-soctherm". For Tegra210, must contain "nvidia,tegra210-soctherm". -- reg : Should contain 1 entry: +- reg : Should contain at least 2 entries for each entry in reg-names: - SOCTHERM register set + - Tegra CAR register set: Required for Tegra124 and Tegra210. + - CCROC register set: Required for Tegra132. +- reg-names : Should contain at least 2 entries: + - soctherm-reg + - car-reg + - ccroc-reg - interrupts : Defines the interrupt used by SOCTHERM - clocks : Must contain an entry for each entry in clock-names. See ../clocks/clock-bindings.txt for details. @@ -25,17 +31,45 @@ Required properties : - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description of this property. See for a list of valid values when referring to thermal sensors. +- throttle-cfgs: A sub-node which is a container of configuration for each + hardware throttle events. These events can be set as cooling devices. + * throttle events: Sub-nodes must be named as "light" or "heavy". + Properties: + - nvidia,priority: Each throttles has its own throttle settings, so the + SW need to set priorities for various throttle, the HW arbiter can select + the final throttle settings. + Bigger value indicates higher priority, In general, higher priority + translates to lower target frequency. SW needs to ensure that critical + thermal alarms are given higher priority, and ensure that there is + no race if priority of two vectors is set to the same value. + The range of this value is 1~100. + - nvidia,cpu-throt-percent: This property is for Tegra124 and Tegra210. + It is the throttling depth of pulse skippers, it's the percentage + throttling. + - nvidia,cpu-throt-level: This property is only for Tegra132, it is the + level of pulse skippers, which used to throttle clock frequencies. It + indicates cpu clock throttling depth, and the depth can be programmed. + Must set as following values: + TEGRA_SOCTHERM_THROT_LEVEL_LOW, TEGRA_SOCTHERM_THROT_LEVEL_MED + TEGRA_SOCTHERM_THROT_LEVEL_HIGH, TEGRA_SOCTHERM_THROT_LEVEL_NONE + - #cooling-cells: Should be 1. This cooling device only support on/off state. + See ./thermal.txt for a description of this property. Note: - the "critical" type trip points will be set to SOC_THERM hardware as the shut down temperature. Once the temperature of this thermal zone is higher than it, the system will be shutdown or reset by hardware. +- the "hot" type trip points will be set to SOC_THERM hardware as the throttle +temperature. Once the the temperature of this thermal zone is higher +than it, it will trigger the HW throttle event. Example : soctherm@700e2000 { compatible = "nvidia,tegra124-soctherm"; - reg = <0x0 0x700e2000 0x0 0x1000>; + reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */ + 0x0 0x60006000 0x0 0x400 /* CAR reg_base */ + reg-names = "soctherm-reg", "car-reg"; interrupts = ; clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, <&tegra_car TEGRA124_CLK_SOC_THERM>; @@ -44,6 +78,76 @@ Example : reset-names = "soctherm"; #thermal-sensor-cells = <1>; + + throttle-cfgs { + /* + * When the "heavy" cooling device triggered, + * the HW will skip cpu clock's pulse in 85% depth + */ + throttle_heavy: heavy { + nvidia,priority = <100>; + nvidia,cpu-throt-percent = <85>; + + #cooling-cells = <1>; + }; + + /* + * When the "light" cooling device triggered, + * the HW will skip cpu clock's pulse in 50% depth + */ + throttle_light: light { + nvidia,priority = <80>; + nvidia,cpu-throt-percent = <50>; + + #cooling-cells = <1>; + }; + + /* + * If these two devices are triggered in same time, the HW throttle + * arbiter will select the highest priority as the final throttle + * settings to skip cpu pulse. + */ + }; + }; + +Example: referring to Tegra132's "reg", "reg-names" and "throttle-cfgs" : + + soctherm@700e2000 { + compatible = "nvidia,tegra132-soctherm"; + reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */ + 0x0 0x70040000 0x0 0x200>; /* CCROC reg_base */; + reg-names = "soctherm-reg", "ccroc-reg"; + + throttle-cfgs { + /* + * When the "heavy" cooling device triggered, + * the HW will skip cpu clock's pulse in HIGH level + */ + throttle_heavy: heavy { + nvidia,priority = <100>; + nvidia,cpu-throt-level = ; + + #cooling-cells = <1>; + }; + + /* + * When the "light" cooling device triggered, + * the HW will skip cpu clock's pulse in MED level + */ + throttle_light: light { + nvidia,priority = <80>; + nvidia,cpu-throt-level = ; + + #cooling-cells = <1>; + }; + + /* + * If these two devices are triggered in same time, the HW throttle + * arbiter will select the highest priority as the final throttle + * settings to skip cpu pulse. + */ + + }; }; Example: referring to thermal sensors : @@ -62,6 +166,19 @@ Example: referring to thermal sensors : hysteresis = <1000>; type = "critical"; }; + + cpu_throttle_trip: throttle-trip { + temperature = <100000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_throttle_trip>; + cooling-device = <&throttle_heavy 1 1>; + }; }; }; }; -- cgit v1.2.3