From dfbae3309568f296e5dccfe1ec10db0f6804b756 Mon Sep 17 00:00:00 2001 From: Li Jun Date: Fri, 19 Feb 2016 10:04:47 +0800 Subject: Documentation: usb: chipidea: Update test procedure for HNP polling Update HNP test procedure as HNP polling is supported. Acked-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Felipe Balbi --- Documentation/usb/chipidea.txt | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/usb/chipidea.txt b/Documentation/usb/chipidea.txt index 05f735a1b5a5..678741b0f213 100644 --- a/Documentation/usb/chipidea.txt +++ b/Documentation/usb/chipidea.txt @@ -26,16 +26,17 @@ cat /sys/kernel/debug/ci_hdrc.0/registers On B-device: echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req - if HNP polling is not supported, also need: - On A-device: - echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req - B-device should take host role and enumrate A-device. 4) A-device switch back to host. On B-device: echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req + or, by introducing HNP polling, B-Host can know when A-peripheral wish + to be host role, so this role switch also can be trigged in A-peripheral + side by answering the polling from B-Host, this can be done on A-device: + echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req + A-device should switch back to host and enumrate B-device. 5) Remove B-device(unplug micro B plug) and insert again in 10 seconds, -- cgit v1.2.3 From 6c0c0951bbf8c2c216675fe277fba4c42aa0a2bf Mon Sep 17 00:00:00 2001 From: Antti Seppälä Date: Sat, 27 Feb 2016 12:31:24 +0200 Subject: usb: dwc2: Add support for Lantiq ARX and XRX SoCs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add support for Lantiq ARX and XRX SoC families to the dwc2 driver. Acked-by: John Youn Signed-off-by: Antti Seppälä Signed-off-by: Felipe Balbi --- Documentation/devicetree/bindings/usb/dwc2.txt | 2 ++ drivers/usb/dwc2/platform.c | 34 ++++++++++++++++++++++++++ 2 files changed, 36 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index 221368207ca4..20a68bf2b4e7 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -8,6 +8,8 @@ Required properties: - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc; - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc; - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc; + - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs; + - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs; - snps,dwc2: A generic DWC2 USB controller with default parameters. - reg : Should contain 1 register range (address and length) - interrupts : Should contain 1 interrupt diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index bc3f2a45a2bc..88629bed6614 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -149,6 +149,38 @@ static const struct dwc2_core_params params_rk3066 = { .hibernation = -1, }; +static const struct dwc2_core_params params_ltq = { + .otg_cap = 2, /* non-HNP/non-SRP */ + .otg_ver = -1, + .dma_enable = -1, + .dma_desc_enable = -1, + .dma_desc_fs_enable = -1, + .speed = -1, + .enable_dynamic_fifo = -1, + .en_multiple_tx_fifo = -1, + .host_rx_fifo_size = 288, /* 288 DWORDs */ + .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */ + .host_perio_tx_fifo_size = 96, /* 96 DWORDs */ + .max_transfer_size = 65535, + .max_packet_count = 511, + .host_channels = -1, + .phy_type = -1, + .phy_utmi_width = -1, + .phy_ulpi_ddr = -1, + .phy_ulpi_ext_vbus = -1, + .i2c_enable = -1, + .ulpi_fs_ls = -1, + .host_support_fs_ls_low_power = -1, + .host_ls_low_power_phy_clk = -1, + .ts_dline = -1, + .reload_ctl = -1, + .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << + GAHBCFG_HBSTLEN_SHIFT, + .uframe_sched = -1, + .external_id_pin_ctl = -1, + .hibernation = -1, +}; + /* * Check the dr_mode against the module configuration and hardware * capabilities. @@ -428,6 +460,8 @@ static const struct of_device_id dwc2_of_match_table[] = { { .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 }, { .compatible = "hisilicon,hi6220-usb", .data = ¶ms_hi6220 }, { .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 }, + { .compatible = "lantiq,arx100-usb", .data = ¶ms_ltq }, + { .compatible = "lantiq,xrx200-usb", .data = ¶ms_ltq }, { .compatible = "snps,dwc2", .data = NULL }, { .compatible = "samsung,s3c6400-hsotg", .data = NULL}, {}, -- cgit v1.2.3