From f35e0cc25280cb0063b0e4481f99268fbd872ff3 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Tue, 6 Jul 2021 08:44:00 +0300 Subject: doc, af_xdp: Fix bind flags option typo Fix XDP_ZERO_COPY flag typo since it is actually named XDP_ZEROCOPY instead as per if_xdp.h uapi header. Signed-off-by: Baruch Siach Signed-off-by: Daniel Borkmann Acked-by: Magnus Karlsson Link: https://lore.kernel.org/bpf/1656fdf94704e9e735df0f8b97667d8f26dd098b.1625550240.git.baruch@tkos.co.il --- Documentation/networking/af_xdp.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/af_xdp.rst b/Documentation/networking/af_xdp.rst index 42576880aa4a..60b217b436be 100644 --- a/Documentation/networking/af_xdp.rst +++ b/Documentation/networking/af_xdp.rst @@ -243,8 +243,8 @@ Configuration Flags and Socket Options These are the various configuration flags that can be used to control and monitor the behavior of AF_XDP sockets. -XDP_COPY and XDP_ZERO_COPY bind flags -------------------------------------- +XDP_COPY and XDP_ZEROCOPY bind flags +------------------------------------ When you bind to a socket, the kernel will first try to use zero-copy copy. If zero-copy is not supported, it will fall back on using copy @@ -252,7 +252,7 @@ mode, i.e. copying all packets out to user space. But if you would like to force a certain mode, you can use the following flags. If you pass the XDP_COPY flag to the bind call, the kernel will force the socket into copy mode. If it cannot use copy mode, the bind call will -fail with an error. Conversely, the XDP_ZERO_COPY flag will force the +fail with an error. Conversely, the XDP_ZEROCOPY flag will force the socket into zero-copy mode or fail. XDP_SHARED_UMEM bind flag -- cgit v1.2.3 From bdad810eb97875813a067504424a483aaa309bad Mon Sep 17 00:00:00 2001 From: Joakim Zhang Date: Mon, 19 Jul 2021 15:18:19 +0800 Subject: dt-bindings: net: snps,dwmac: add missing DWMAC IP version Add missing DWMAC IP version in snps,dwmac.yaml which found by below command, as NXP i.MX8 families support SNPS DWMAC 5.10a IP. $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml Documentation/devicetree/bindings/net/nxp,dwmac-imx.example.dt.yaml: ethernet@30bf0000: compatible: None of ['nxp,imx8mp-dwmac-eqos', 'snps,dwmac-5.10a'] are valid under the given schema Signed-off-by: Joakim Zhang Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/snps,dwmac.yaml | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index d7652596a09b..42689b7d03a2 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -28,6 +28,7 @@ select: - snps,dwmac-4.00 - snps,dwmac-4.10a - snps,dwmac-4.20a + - snps,dwmac-5.10a - snps,dwxgmac - snps,dwxgmac-2.10 @@ -82,6 +83,7 @@ properties: - snps,dwmac-4.00 - snps,dwmac-4.10a - snps,dwmac-4.20a + - snps,dwmac-5.10a - snps,dwxgmac - snps,dwxgmac-2.10 @@ -375,6 +377,7 @@ allOf: - snps,dwmac-4.00 - snps,dwmac-4.10a - snps,dwmac-4.20a + - snps,dwmac-5.10a - snps,dwxgmac - snps,dwxgmac-2.10 - st,spear600-gmac -- cgit v1.2.3 From e314a07ef263916f761b736ded7a30894709dfd7 Mon Sep 17 00:00:00 2001 From: Joakim Zhang Date: Mon, 19 Jul 2021 15:18:20 +0800 Subject: dt-bindings: net: imx-dwmac: convert imx-dwmac bindings to yaml In order to automate the verification of DT nodes covert imx-dwmac to nxp,dwmac-imx.yaml, and pass below checking. $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml Signed-off-by: Joakim Zhang Signed-off-by: David S. Miller --- .../devicetree/bindings/net/imx-dwmac.txt | 56 ------------- .../devicetree/bindings/net/nxp,dwmac-imx.yaml | 93 ++++++++++++++++++++++ 2 files changed, 93 insertions(+), 56 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/imx-dwmac.txt create mode 100644 Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/imx-dwmac.txt b/Documentation/devicetree/bindings/net/imx-dwmac.txt deleted file mode 100644 index 921d522fe8d7..000000000000 --- a/Documentation/devicetree/bindings/net/imx-dwmac.txt +++ /dev/null @@ -1,56 +0,0 @@ -IMX8 glue layer controller, NXP imx8 families support Synopsys MAC 5.10a IP. - -This file documents platform glue layer for IMX. -Please see stmmac.txt for the other unchanged properties. - -The device node has following properties. - -Required properties: -- compatible: Should be "nxp,imx8mp-dwmac-eqos" to select glue layer - and "snps,dwmac-5.10a" to select IP version. -- clocks: Must contain a phandle for each entry in clock-names. -- clock-names: Should be "stmmaceth" for the host clock. - Should be "pclk" for the MAC apb clock. - Should be "ptp_ref" for the MAC timer clock. - Should be "tx" for the MAC RGMII TX clock: - Should be "mem" for EQOS MEM clock. - - "mem" clock is required for imx8dxl platform. - - "mem" clock is not required for imx8mp platform. -- interrupt-names: Should contain a list of interrupt names corresponding to - the interrupts in the interrupts property, if available. - Should be "macirq" for the main MAC IRQ - Should be "eth_wake_irq" for the IT which wake up system -- intf_mode: Should be phandle/offset pair. The phandle to the syscon node which - encompases the GPR register, and the offset of the GPR register. - - required for imx8mp platform. - - is optional for imx8dxl platform. - -Optional properties: -- intf_mode: is optional for imx8dxl platform. -- snps,rmii_refclk_ext: to select RMII reference clock from external. - -Example: - eqos: ethernet@30bf0000 { - compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a"; - reg = <0x30bf0000 0x10000>; - interrupts = , - ; - interrupt-names = "eth_wake_irq", "macirq"; - clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>, - <&clk IMX8MP_CLK_QOS_ENET_ROOT>, - <&clk IMX8MP_CLK_ENET_QOS_TIMER>, - <&clk IMX8MP_CLK_ENET_QOS>; - clock-names = "stmmaceth", "pclk", "ptp_ref", "tx"; - assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>, - <&clk IMX8MP_CLK_ENET_QOS_TIMER>, - <&clk IMX8MP_CLK_ENET_QOS>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>, - <&clk IMX8MP_SYS_PLL2_100M>, - <&clk IMX8MP_SYS_PLL2_125M>; - assigned-clock-rates = <0>, <100000000>, <125000000>; - nvmem-cells = <ð_mac0>; - nvmem-cell-names = "mac-address"; - nvmem_macaddr_swap; - intf_mode = <&gpr 0x4>; - status = "disabled"; - }; diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml new file mode 100644 index 000000000000..5629b2e4ccf8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/nxp,dwmac-imx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8 DWMAC glue layer Device Tree Bindings + +maintainers: + - Joakim Zhang + +# We need a select here so we don't match all nodes with 'snps,dwmac' +select: + properties: + compatible: + contains: + enum: + - nxp,imx8mp-dwmac-eqos + - nxp,imx8dxl-dwmac-eqos + required: + - compatible + +allOf: + - $ref: "snps,dwmac.yaml#" + +properties: + compatible: + oneOf: + - items: + - enum: + - nxp,imx8mp-dwmac-eqos + - nxp,imx8dxl-dwmac-eqos + - const: snps,dwmac-5.10a + + clocks: + minItems: 3 + maxItems: 5 + items: + - description: MAC host clock + - description: MAC apb clock + - description: MAC timer clock + - description: MAC RGMII TX clock + - description: EQOS MEM clock + + clock-names: + minItems: 3 + maxItems: 5 + contains: + enum: + - stmmaceth + - pclk + - ptp_ref + - tx + - mem + + intf_mode: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Should be phandle/offset pair. The phandle to the syscon node which + encompases the GPR register, and the offset of the GPR register. + + snps,rmii_refclk_ext: + $ref: /schemas/types.yaml#/definitions/flag + description: + To select RMII reference clock from external. + +required: + - compatible + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + eqos: ethernet@30bf0000 { + compatible = "nxp,imx8mp-dwmac-eqos","snps,dwmac-5.10a"; + reg = <0x30bf0000 0x10000>; + interrupts = , + ; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>, + <&clk IMX8MP_CLK_QOS_ENET_ROOT>, + <&clk IMX8MP_CLK_ENET_QOS_TIMER>, + <&clk IMX8MP_CLK_ENET_QOS>; + clock-names = "stmmaceth", "pclk", "ptp_ref", "tx"; + phy-mode = "rgmii"; + status = "disabled"; + }; -- cgit v1.2.3 From 213ad73d06073b197a02476db3a4998e219ddb06 Mon Sep 17 00:00:00 2001 From: Wei Wang Date: Wed, 21 Jul 2021 10:27:38 -0700 Subject: tcp: disable TFO blackhole logic by default Multiple complaints have been raised from the TFO users on the internet stating that the TFO blackhole logic is too aggressive and gets falsely triggered too often. (e.g. https://blog.apnic.net/2021/07/05/tcp-fast-open-not-so-fast/) Considering that most middleboxes no longer drop TFO packets, we decide to disable the blackhole logic by setting /proc/sys/net/ipv4/tcp_fastopen_blackhole_timeout_set to 0 by default. Fixes: cf1ef3f0719b4 ("net/tcp_fastopen: Disable active side TFO in certain scenarios") Signed-off-by: Wei Wang Signed-off-by: Eric Dumazet Acked-by: Neal Cardwell Acked-by: Soheil Hassas Yeganeh Acked-by: Yuchung Cheng Signed-off-by: David S. Miller --- Documentation/networking/ip-sysctl.rst | 2 +- net/ipv4/tcp_fastopen.c | 9 ++++++++- net/ipv4/tcp_ipv4.c | 2 +- 3 files changed, 10 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index b3fa522e4cd9..316c7dfa9693 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -826,7 +826,7 @@ tcp_fastopen_blackhole_timeout_sec - INTEGER initial value when the blackhole issue goes away. 0 to disable the blackhole detection. - By default, it is set to 1hr. + By default, it is set to 0 (feature is disabled). tcp_fastopen_key - list of comma separated 32-digit hexadecimal INTEGERs The list consists of a primary key and an optional backup key. The diff --git a/net/ipv4/tcp_fastopen.c b/net/ipv4/tcp_fastopen.c index b32af76e2132..25fa4c01a17f 100644 --- a/net/ipv4/tcp_fastopen.c +++ b/net/ipv4/tcp_fastopen.c @@ -507,6 +507,9 @@ void tcp_fastopen_active_disable(struct sock *sk) { struct net *net = sock_net(sk); + if (!sock_net(sk)->ipv4.sysctl_tcp_fastopen_blackhole_timeout) + return; + /* Paired with READ_ONCE() in tcp_fastopen_active_should_disable() */ WRITE_ONCE(net->ipv4.tfo_active_disable_stamp, jiffies); @@ -526,10 +529,14 @@ void tcp_fastopen_active_disable(struct sock *sk) bool tcp_fastopen_active_should_disable(struct sock *sk) { unsigned int tfo_bh_timeout = sock_net(sk)->ipv4.sysctl_tcp_fastopen_blackhole_timeout; - int tfo_da_times = atomic_read(&sock_net(sk)->ipv4.tfo_active_disable_times); unsigned long timeout; + int tfo_da_times; int multiplier; + if (!tfo_bh_timeout) + return false; + + tfo_da_times = atomic_read(&sock_net(sk)->ipv4.tfo_active_disable_times); if (!tfo_da_times) return false; diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index b9dc2d6197be..a692626c19e4 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -2965,7 +2965,7 @@ static int __net_init tcp_sk_init(struct net *net) net->ipv4.sysctl_tcp_comp_sack_nr = 44; net->ipv4.sysctl_tcp_fastopen = TFO_CLIENT_ENABLE; spin_lock_init(&net->ipv4.tcp_fastopen_ctx_lock); - net->ipv4.sysctl_tcp_fastopen_blackhole_timeout = 60 * 60; + net->ipv4.sysctl_tcp_fastopen_blackhole_timeout = 0; atomic_set(&net->ipv4.tfo_active_disable_times, 0); /* Reno is always built in */ -- cgit v1.2.3