From 8ee83a747ac2309934c229281dda8f26648ec462 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Fri, 1 May 2015 10:43:45 -0700 Subject: target/user: Disallow full passthrough (pass_level=0) TCMU requires more work to correctly handle both user handlers that want all SCSI commands (pass_level=0) for a se_device, and also handlers that just want I/O commands and let the others be emulated by the kernel (pass_level=1). Only support the latter for now. For full passthrough, we will need to support a second se_subsystem_api template, due to configfs attributes being different between the two modes. Thus pass_level is extraneous, and we can remove it. The ABI break for TCMU v2 is already applied for this release, so it's best to do this now to avoid another ABI break in the future. Signed-off-by: Andy Grover Reviewed-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- Documentation/target/tcmu-design.txt | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) (limited to 'Documentation') diff --git a/Documentation/target/tcmu-design.txt b/Documentation/target/tcmu-design.txt index 43e94ea6d2ca..c80bf1ed8981 100644 --- a/Documentation/target/tcmu-design.txt +++ b/Documentation/target/tcmu-design.txt @@ -15,7 +15,7 @@ Contents: a) Discovering and configuring TCMU uio devices b) Waiting for events on the device(s) c) Managing the command ring -3) Command filtering and pass_level +3) Command filtering 4) A final note @@ -360,17 +360,13 @@ int handle_device_events(int fd, void *map) } -Command filtering and pass_level --------------------------------- +Command filtering +----------------- -TCMU supports a "pass_level" option with valid values of 0 or 1. When -the value is 0 (the default), nearly all SCSI commands received for -the device are passed through to the handler. This allows maximum -flexibility but increases the amount of code required by the handler, -to support all mandatory SCSI commands. If pass_level is set to 1, -then only IO-related commands are presented, and the rest are handled -by LIO's in-kernel command emulation. The commands presented at level -1 include all versions of: +Initial TCMU support is for a filtered commandset. Only IO-related +commands are presented to userspace, and the rest are handled by LIO's +in-kernel command emulation. The commands presented are all versions +of: READ WRITE -- cgit v1.2.3 From 4b8038dca0c0ccf5e4689cc4fbbbf4f3728304be Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Mon, 20 Apr 2015 08:10:22 +0000 Subject: Revert "serial: sirf: add a new uart type support" This reverts commit 52bec4ed4e("serial: sirf: add a new uart type support"). we misunderstood the clock dependency in atlas7. Actually involved several clocks are in a tree structure. we still only need to take the leaf clock node for BT uarts. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/serial/sirf-uart.txt | 15 +--------- drivers/tty/serial/sirfsoc_uart.c | 34 +++++----------------- drivers/tty/serial/sirfsoc_uart.h | 4 --- 3 files changed, 8 insertions(+), 45 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/serial/sirf-uart.txt b/Documentation/devicetree/bindings/serial/sirf-uart.txt index f0c39261c5d4..67e2a0aeb042 100644 --- a/Documentation/devicetree/bindings/serial/sirf-uart.txt +++ b/Documentation/devicetree/bindings/serial/sirf-uart.txt @@ -2,8 +2,7 @@ Required properties: - compatible : Should be "sirf,prima2-uart", "sirf, prima2-usp-uart", - "sirf,atlas7-uart" or "sirf,atlas7-bt-uart" which means - uart located in BT module and used for BT. + "sirf,atlas7-uart" or "sirf,atlas7-usp-uart". - reg : Offset and length of the register set for the device - interrupts : Should contain uart interrupt - fifosize : Should define hardware rx/tx fifo size @@ -33,15 +32,3 @@ usp@b0090000 { rts-gpios = <&gpio 15 0>; cts-gpios = <&gpio 46 0>; }; - -for uart use in BT module, -uart6: uart@11000000 { - cell-index = <6>; - compatible = "sirf,atlas7-bt-uart", "sirf,atlas7-uart"; - reg = <0x11000000 0x1000>; - interrupts = <0 100 0>; - clocks = <&clks 138>, <&clks 140>, <&clks 141>; - clock-names = "uart", "general", "noc"; - fifosize = <128>; - status = "disabled"; -} diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index 9de3eabe5737..8081cdba8778 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -1032,19 +1032,10 @@ static void sirfsoc_uart_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); - if (!state) { - if (sirfport->is_bt_uart) { - clk_prepare_enable(sirfport->clk_noc); - clk_prepare_enable(sirfport->clk_general); - } + if (!state) clk_prepare_enable(sirfport->clk); - } else { + else clk_disable_unprepare(sirfport->clk); - if (sirfport->is_bt_uart) { - clk_disable_unprepare(sirfport->clk_general); - clk_disable_unprepare(sirfport->clk_noc); - } - } } static int sirfsoc_uart_startup(struct uart_port *port) @@ -1387,26 +1378,12 @@ usp_no_flow_control: } port->irq = res->start; - sirfport->clk = devm_clk_get(&pdev->dev, NULL); + sirfport->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(sirfport->clk)) { ret = PTR_ERR(sirfport->clk); goto err; } port->uartclk = clk_get_rate(sirfport->clk); - if (of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-bt-uart")) { - sirfport->clk_general = devm_clk_get(&pdev->dev, "general"); - if (IS_ERR(sirfport->clk_general)) { - ret = PTR_ERR(sirfport->clk_general); - goto err; - } - sirfport->clk_noc = devm_clk_get(&pdev->dev, "noc"); - if (IS_ERR(sirfport->clk_noc)) { - ret = PTR_ERR(sirfport->clk_noc); - goto err; - } - sirfport->is_bt_uart = true; - } else - sirfport->is_bt_uart = false; port->ops = &sirfsoc_uart_ops; spin_lock_init(&port->lock); @@ -1415,7 +1392,7 @@ usp_no_flow_control: ret = uart_add_one_port(&sirfsoc_uart_drv, port); if (ret != 0) { dev_err(&pdev->dev, "Cannot add UART port(%d).\n", pdev->id); - goto err; + goto port_err; } sirfport->rx_dma_chan = dma_request_slave_channel(port->dev, "rx"); @@ -1444,6 +1421,8 @@ alloc_coherent_err: sirfport->rx_dma_items[j].xmit.buf, sirfport->rx_dma_items[j].dma_addr); dma_release_channel(sirfport->rx_dma_chan); +port_err: + clk_put(sirfport->clk); err: return ret; } @@ -1452,6 +1431,7 @@ static int sirfsoc_uart_remove(struct platform_device *pdev) { struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev); struct uart_port *port = &sirfport->port; + clk_put(sirfport->clk); uart_remove_one_port(&sirfsoc_uart_drv, port); if (sirfport->rx_dma_chan) { int i; diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h index 727eb6b88fff..11fd6814f76d 100644 --- a/drivers/tty/serial/sirfsoc_uart.h +++ b/drivers/tty/serial/sirfsoc_uart.h @@ -417,10 +417,6 @@ struct sirfsoc_uart_port { struct uart_port port; struct clk *clk; - /* UART6 for BT usage in A7DA platform need multi-clock source */ - bool is_bt_uart; - struct clk *clk_general; - struct clk *clk_noc; /* for SiRFatlas7, there are SET/CLR for UART_INT_EN */ bool is_atlas7; struct sirfsoc_uart_register *uart_reg; -- cgit v1.2.3 From c1c325d703d347d967242efb8fef6a1c91a31aac Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 27 Apr 2015 08:49:57 +0200 Subject: tty: serial: 8250_mtk: Add support for bus clock The mtk 8250 needs two clocks, one for providing the baudrate and one that needs to be enabled for register accesses. The latter has not been supported, this patch adds support for it. It is optional for now since not all SoCs provide a bus clock. Signed-off-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/serial/mtk-uart.txt | 12 ++++++++-- drivers/tty/serial/8250/8250_mtk.c | 28 ++++++++++++++++++---- 2 files changed, 34 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index 44152261e5c5..8d63f1da07aa 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -14,7 +14,14 @@ Required properties: - interrupts: A single interrupt specifier. -- clocks: Clock driving the hardware. +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: + - "baud": The clock the baudrate is derived from + - "bus": The bus clock for register accesses (optional) + +For compatibility with older device trees an unnamed clock is used for the +baud clock if the baudclk does not exist. Do not use this for new designs. Example: @@ -22,5 +29,6 @@ Example: compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart"; reg = <0x11006000 0x400>; interrupts = ; - clocks = <&uart_clk>; + clocks = <&uart_clk>, <&bus_clk>; + clock-names = "baud", "bus"; }; diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index 2f28bd08b69f..8eb3876563f1 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -34,6 +34,7 @@ struct mtk8250_data { int line; struct clk *uart_clk; + struct clk *bus_clk; }; static void @@ -120,6 +121,7 @@ static int mtk8250_runtime_suspend(struct device *dev) struct mtk8250_data *data = dev_get_drvdata(dev); clk_disable_unprepare(data->uart_clk); + clk_disable_unprepare(data->bus_clk); return 0; } @@ -135,6 +137,12 @@ static int mtk8250_runtime_resume(struct device *dev) return err; } + err = clk_prepare_enable(data->bus_clk); + if (err) { + dev_warn(dev, "Can't enable bus clock\n"); + return err; + } + return 0; } @@ -153,13 +161,24 @@ mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old) static int mtk8250_probe_of(struct platform_device *pdev, struct uart_port *p, struct mtk8250_data *data) { - data->uart_clk = devm_clk_get(&pdev->dev, NULL); + data->uart_clk = devm_clk_get(&pdev->dev, "baud"); if (IS_ERR(data->uart_clk)) { - dev_warn(&pdev->dev, "Can't get uart clock\n"); - return PTR_ERR(data->uart_clk); + /* + * For compatibility with older device trees try unnamed + * clk when no baud clk can be found. + */ + data->uart_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(data->uart_clk)) { + dev_warn(&pdev->dev, "Can't get uart clock\n"); + return PTR_ERR(data->uart_clk); + } + + return 0; } - p->uartclk = clk_get_rate(data->uart_clk); + data->bus_clk = devm_clk_get(&pdev->dev, "bus"); + if (IS_ERR(data->bus_clk)) + return PTR_ERR(data->bus_clk); return 0; } @@ -204,6 +223,7 @@ static int mtk8250_probe(struct platform_device *pdev) uart.port.regshift = 2; uart.port.private_data = data; uart.port.set_termios = mtk8250_set_termios; + uart.port.uartclk = clk_get_rate(data->uart_clk); /* Disable Rate Fix function */ writel(0x0, uart.port.membase + -- cgit v1.2.3 From f94029d8801d7c27a94a3ea6c4967aa33c49c34b Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Mon, 4 May 2015 23:04:14 +0200 Subject: clk: si5351: Mention clock-names in the binding documentation Since the introduction of clk-si5351 the way we should deal with DT provided clocks has changed from indexed to named clock phandles. Amend the binding documentation to reflect named clock phandles by clock-names property. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Michael Turquette --- Documentation/devicetree/bindings/clock/silabs,si5351.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt index c40711e8e8f7..28b28309f535 100644 --- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt @@ -17,7 +17,8 @@ Required properties: - #clock-cells: from common clock binding; shall be set to 1. - clocks: from common clock binding; list of parent clock handles, shall be xtal reference clock or xtal and clkin for - si5351c only. + si5351c only. Corresponding clock input names are "xtal" and + "clkin" respectively. - #address-cells: shall be set to 1. - #size-cells: shall be set to 0. @@ -71,6 +72,7 @@ i2c-master-node { /* connect xtal input to 25MHz reference */ clocks = <&ref25>; + clock-names = "xtal"; /* connect xtal input as source of pll0 and pll1 */ silabs,pll-source = <0 0>, <1 0>; -- cgit v1.2.3 From 1a48632ffed61352a7810ce089dc5a8bcd505a60 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Mon, 13 Apr 2015 13:24:34 -0400 Subject: pty: Fix input race when closing A read() from a pty master may mistakenly indicate EOF (errno == -EIO) after the pty slave has closed, even though input data remains to be read. For example, pty slave | input worker | pty master | | | | n_tty_read() pty_write() | | input avail? no add data | | sleep schedule worker --->| | . |---> flush_to_ldisc() | . pty_close() | fill read buffer | . wait for worker | wakeup reader --->| . | read buffer full? |---> input avail ? yes |<--- yes - exit worker | copy 4096 bytes to user TTY_OTHER_CLOSED <---| |<--- kick worker | | **** New read() before worker starts **** | | n_tty_read() | | input avail? no | | TTY_OTHER_CLOSED? yes | | return -EIO Several conditions are required to trigger this race: 1. the ldisc read buffer must become full so the input worker exits 2. the read() count parameter must be >= 4096 so the ldisc read buffer is empty 3. the subsequent read() occurs before the kicked worker has processed more input However, the underlying cause of the race is that data is pipelined, while tty state is not; ie., data already written by the pty slave end is not yet visible to the pty master end, but state changes by the pty slave end are visible to the pty master end immediately. Pipeline the TTY_OTHER_CLOSED state through input worker to the reader. 1. Introduce TTY_OTHER_DONE which is set by the input worker when TTY_OTHER_CLOSED is set and either the input buffers are flushed or input processing has completed. Readers/polls are woken when TTY_OTHER_DONE is set. 2. Reader/poll checks TTY_OTHER_DONE instead of TTY_OTHER_CLOSED. 3. A new input worker is started from pty_close() after setting TTY_OTHER_CLOSED, which ensures the TTY_OTHER_DONE state will be set if the last input worker is already finished (or just about to exit). Remove tty_flush_to_ldisc(); no in-tree callers. Fixes: 52bce7f8d4fc ("pty, n_tty: Simplify input processing on final close") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96311 BugLink: http://bugs.launchpad.net/bugs/1429756 Cc: # 3.19+ Reported-by: Andy Whitcroft Reported-by: H.J. Lu Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- Documentation/serial/tty.txt | 3 +++ drivers/tty/n_hdlc.c | 4 ++-- drivers/tty/n_tty.c | 22 ++++++++++++++++++---- drivers/tty/pty.c | 5 +++-- drivers/tty/tty_buffer.c | 41 +++++++++++++++++++++++++++-------------- include/linux/tty.h | 2 +- 6 files changed, 54 insertions(+), 23 deletions(-) (limited to 'Documentation') diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt index 1e52d67d0abf..dbe6623fed1c 100644 --- a/Documentation/serial/tty.txt +++ b/Documentation/serial/tty.txt @@ -198,6 +198,9 @@ TTY_IO_ERROR If set, causes all subsequent userspace read/write TTY_OTHER_CLOSED Device is a pty and the other side has closed. +TTY_OTHER_DONE Device is a pty and the other side has closed and + all pending input processing has been completed. + TTY_NO_WRITE_SPLIT Prevent driver from splitting up writes into smaller chunks. diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index 644ddb841d9f..bbc4ce66c2c1 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -600,7 +600,7 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, add_wait_queue(&tty->read_wait, &wait); for (;;) { - if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) { + if (test_bit(TTY_OTHER_DONE, &tty->flags)) { ret = -EIO; break; } @@ -828,7 +828,7 @@ static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp, /* set bits for operations that won't block */ if (n_hdlc->rx_buf_list.head) mask |= POLLIN | POLLRDNORM; /* readable */ - if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) + if (test_bit(TTY_OTHER_DONE, &tty->flags)) mask |= POLLHUP; if (tty_hung_up_p(filp)) mask |= POLLHUP; diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index cf6e0f2e1331..cc57a3a6b02b 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1949,6 +1949,18 @@ static inline int input_available_p(struct tty_struct *tty, int poll) return ldata->commit_head - ldata->read_tail >= amt; } +static inline int check_other_done(struct tty_struct *tty) +{ + int done = test_bit(TTY_OTHER_DONE, &tty->flags); + if (done) { + /* paired with cmpxchg() in check_other_closed(); ensures + * read buffer head index is not stale + */ + smp_mb__after_atomic(); + } + return done; +} + /** * copy_from_read_buf - copy read data directly * @tty: terminal device @@ -2167,7 +2179,7 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, struct n_tty_data *ldata = tty->disc_data; unsigned char __user *b = buf; DEFINE_WAIT_FUNC(wait, woken_wake_function); - int c; + int c, done; int minimum, time; ssize_t retval = 0; long timeout; @@ -2235,8 +2247,10 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, ((minimum - (b - buf)) >= 1)) ldata->minimum_to_wake = (minimum - (b - buf)); + done = check_other_done(tty); + if (!input_available_p(tty, 0)) { - if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) { + if (done) { retval = -EIO; break; } @@ -2443,12 +2457,12 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file, poll_wait(file, &tty->read_wait, wait); poll_wait(file, &tty->write_wait, wait); + if (check_other_done(tty)) + mask |= POLLHUP; if (input_available_p(tty, 1)) mask |= POLLIN | POLLRDNORM; if (tty->packet && tty->link->ctrl_status) mask |= POLLPRI | POLLIN | POLLRDNORM; - if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) - mask |= POLLHUP; if (tty_hung_up_p(file)) mask |= POLLHUP; if (!(mask & (POLLHUP | POLLIN | POLLRDNORM))) { diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index e72ee629cead..4d5e8409769c 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -53,9 +53,8 @@ static void pty_close(struct tty_struct *tty, struct file *filp) /* Review - krefs on tty_link ?? */ if (!tty->link) return; - tty_flush_to_ldisc(tty->link); set_bit(TTY_OTHER_CLOSED, &tty->link->flags); - wake_up_interruptible(&tty->link->read_wait); + tty_flip_buffer_push(tty->link->port); wake_up_interruptible(&tty->link->write_wait); if (tty->driver->subtype == PTY_TYPE_MASTER) { set_bit(TTY_OTHER_CLOSED, &tty->flags); @@ -243,7 +242,9 @@ static int pty_open(struct tty_struct *tty, struct file *filp) goto out; clear_bit(TTY_IO_ERROR, &tty->flags); + /* TTY_OTHER_CLOSED must be cleared before TTY_OTHER_DONE */ clear_bit(TTY_OTHER_CLOSED, &tty->link->flags); + clear_bit(TTY_OTHER_DONE, &tty->link->flags); set_bit(TTY_THROTTLED, &tty->flags); return 0; diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 75661641f5fe..2f78b77f0f81 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -37,6 +37,28 @@ #define TTY_BUFFER_PAGE (((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF) +/* + * If all tty flip buffers have been processed by flush_to_ldisc() or + * dropped by tty_buffer_flush(), check if the linked pty has been closed. + * If so, wake the reader/poll to process + */ +static inline void check_other_closed(struct tty_struct *tty) +{ + unsigned long flags, old; + + /* transition from TTY_OTHER_CLOSED => TTY_OTHER_DONE must be atomic */ + for (flags = ACCESS_ONCE(tty->flags); + test_bit(TTY_OTHER_CLOSED, &flags); + ) { + old = flags; + __set_bit(TTY_OTHER_DONE, &flags); + flags = cmpxchg(&tty->flags, old, flags); + if (old == flags) { + wake_up_interruptible(&tty->read_wait); + break; + } + } +} /** * tty_buffer_lock_exclusive - gain exclusive access to buffer @@ -229,6 +251,8 @@ void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld) if (ld && ld->ops->flush_buffer) ld->ops->flush_buffer(tty); + check_other_closed(tty); + atomic_dec(&buf->priority); mutex_unlock(&buf->lock); } @@ -471,8 +495,10 @@ static void flush_to_ldisc(struct work_struct *work) smp_rmb(); count = head->commit - head->read; if (!count) { - if (next == NULL) + if (next == NULL) { + check_other_closed(tty); break; + } buf->head = next; tty_buffer_free(port, head); continue; @@ -488,19 +514,6 @@ static void flush_to_ldisc(struct work_struct *work) tty_ldisc_deref(disc); } -/** - * tty_flush_to_ldisc - * @tty: tty to push - * - * Push the terminal flip buffers to the line discipline. - * - * Must not be called from IRQ context. - */ -void tty_flush_to_ldisc(struct tty_struct *tty) -{ - flush_work(&tty->port->buf.work); -} - /** * tty_flip_buffer_push - terminal * @port: tty port to push diff --git a/include/linux/tty.h b/include/linux/tty.h index fe5623c9af71..d76631f615c2 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -339,6 +339,7 @@ struct tty_file_private { #define TTY_EXCLUSIVE 3 /* Exclusive open mode */ #define TTY_DEBUG 4 /* Debugging */ #define TTY_DO_WRITE_WAKEUP 5 /* Call write_wakeup after queuing new */ +#define TTY_OTHER_DONE 6 /* Closed pty has completed input processing */ #define TTY_LDISC_OPEN 11 /* Line discipline is open */ #define TTY_PTY_LOCK 16 /* pty private */ #define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */ @@ -462,7 +463,6 @@ extern int tty_hung_up_p(struct file *filp); extern void do_SAK(struct tty_struct *tty); extern void __do_SAK(struct tty_struct *tty); extern void no_tty(void); -extern void tty_flush_to_ldisc(struct tty_struct *tty); extern void tty_buffer_free_all(struct tty_port *port); extern void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld); extern void tty_buffer_init(struct tty_port *port); -- cgit v1.2.3 From 0be0226f07d14b153a5eedf2bb86e1eb7dcefab5 Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Mon, 11 May 2015 22:55:21 +0800 Subject: KVM: MMU: fix SMAP virtualization KVM may turn a user page to a kernel page when kernel writes a readonly user page if CR0.WP = 1. This shadow page entry will be reused after SMAP is enabled so that kernel is allowed to access this user page Fix it by setting SMAP && !CR0.WP into shadow page's role and reset mmu once CR4.SMAP is updated Signed-off-by: Xiao Guangrong Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- Documentation/virtual/kvm/mmu.txt | 18 ++++++++++++++---- arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/mmu.c | 16 ++++++++++++---- arch/x86/kvm/mmu.h | 2 -- arch/x86/kvm/x86.c | 8 +++----- 5 files changed, 30 insertions(+), 15 deletions(-) (limited to 'Documentation') diff --git a/Documentation/virtual/kvm/mmu.txt b/Documentation/virtual/kvm/mmu.txt index 53838d9c6295..c59bd9bc41ef 100644 --- a/Documentation/virtual/kvm/mmu.txt +++ b/Documentation/virtual/kvm/mmu.txt @@ -169,6 +169,10 @@ Shadow pages contain the following information: Contains the value of cr4.smep && !cr0.wp for which the page is valid (pages for which this is true are different from other pages; see the treatment of cr0.wp=0 below). + role.smap_andnot_wp: + Contains the value of cr4.smap && !cr0.wp for which the page is valid + (pages for which this is true are different from other pages; see the + treatment of cr0.wp=0 below). gfn: Either the guest page table containing the translations shadowed by this page, or the base page frame for linear translations. See role.direct. @@ -344,10 +348,16 @@ on fault type: (user write faults generate a #PF) -In the first case there is an additional complication if CR4.SMEP is -enabled: since we've turned the page into a kernel page, the kernel may now -execute it. We handle this by also setting spte.nx. If we get a user -fetch or read fault, we'll change spte.u=1 and spte.nx=gpte.nx back. +In the first case there are two additional complications: +- if CR4.SMEP is enabled: since we've turned the page into a kernel page, + the kernel may now execute it. We handle this by also setting spte.nx. + If we get a user fetch or read fault, we'll change spte.u=1 and + spte.nx=gpte.nx back. +- if CR4.SMAP is disabled: since the page has been changed to a kernel + page, it can not be reused when CR4.SMAP is enabled. We set + CR4.SMAP && !CR0.WP into shadow page's role to avoid this case. Note, + here we do not care the case that CR4.SMAP is enabled since KVM will + directly inject #PF to guest due to failed permission check. To prevent an spte that was converted into a kernel page with cr0.wp=0 from being written by the kernel after cr0.wp has changed to 1, we make diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index dea2e7e962e3..e61c3a4ee131 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -207,6 +207,7 @@ union kvm_mmu_page_role { unsigned nxe:1; unsigned cr0_wp:1; unsigned smep_andnot_wp:1; + unsigned smap_andnot_wp:1; }; }; diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 209fe1477465..44a7d2515497 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -3736,8 +3736,8 @@ static void reset_rsvds_bits_mask_ept(struct kvm_vcpu *vcpu, } } -void update_permission_bitmask(struct kvm_vcpu *vcpu, - struct kvm_mmu *mmu, bool ept) +static void update_permission_bitmask(struct kvm_vcpu *vcpu, + struct kvm_mmu *mmu, bool ept) { unsigned bit, byte, pfec; u8 map; @@ -3918,6 +3918,7 @@ static void init_kvm_tdp_mmu(struct kvm_vcpu *vcpu) void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu) { bool smep = kvm_read_cr4_bits(vcpu, X86_CR4_SMEP); + bool smap = kvm_read_cr4_bits(vcpu, X86_CR4_SMAP); struct kvm_mmu *context = &vcpu->arch.mmu; MMU_WARN_ON(VALID_PAGE(context->root_hpa)); @@ -3936,6 +3937,8 @@ void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu) context->base_role.cr0_wp = is_write_protection(vcpu); context->base_role.smep_andnot_wp = smep && !is_write_protection(vcpu); + context->base_role.smap_andnot_wp + = smap && !is_write_protection(vcpu); } EXPORT_SYMBOL_GPL(kvm_init_shadow_mmu); @@ -4207,12 +4210,18 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa, const u8 *new, int bytes) { gfn_t gfn = gpa >> PAGE_SHIFT; - union kvm_mmu_page_role mask = { .word = 0 }; struct kvm_mmu_page *sp; LIST_HEAD(invalid_list); u64 entry, gentry, *spte; int npte; bool remote_flush, local_flush, zap_page; + union kvm_mmu_page_role mask = (union kvm_mmu_page_role) { + .cr0_wp = 1, + .cr4_pae = 1, + .nxe = 1, + .smep_andnot_wp = 1, + .smap_andnot_wp = 1, + }; /* * If we don't have indirect shadow pages, it means no page is @@ -4238,7 +4247,6 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa, ++vcpu->kvm->stat.mmu_pte_write; kvm_mmu_audit(vcpu, AUDIT_PRE_PTE_WRITE); - mask.cr0_wp = mask.cr4_pae = mask.nxe = mask.smep_andnot_wp = 1; for_each_gfn_indirect_valid_sp(vcpu->kvm, sp, gfn) { if (detect_write_misaligned(sp, gpa, bytes) || detect_write_flooding(sp)) { diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h index 06eb2fc1bab8..0ada65ecddcf 100644 --- a/arch/x86/kvm/mmu.h +++ b/arch/x86/kvm/mmu.h @@ -71,8 +71,6 @@ enum { int handle_mmio_page_fault_common(struct kvm_vcpu *vcpu, u64 addr, bool direct); void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu); void kvm_init_shadow_ept_mmu(struct kvm_vcpu *vcpu, bool execonly); -void update_permission_bitmask(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu, - bool ept); static inline unsigned int kvm_mmu_available_pages(struct kvm *kvm) { diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index c73efcd03e29..986b3f5d0523 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -702,8 +702,9 @@ EXPORT_SYMBOL_GPL(kvm_set_xcr); int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) { unsigned long old_cr4 = kvm_read_cr4(vcpu); - unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | - X86_CR4_PAE | X86_CR4_SMEP; + unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE | + X86_CR4_SMEP | X86_CR4_SMAP; + if (cr4 & CR4_RESERVED_BITS) return 1; @@ -744,9 +745,6 @@ int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) (!(cr4 & X86_CR4_PCIDE) && (old_cr4 & X86_CR4_PCIDE))) kvm_mmu_reset_context(vcpu); - if ((cr4 ^ old_cr4) & X86_CR4_SMAP) - update_permission_bitmask(vcpu, vcpu->arch.walk_mmu, false); - if ((cr4 ^ old_cr4) & X86_CR4_OSXSAVE) kvm_update_cpuid(vcpu); -- cgit v1.2.3 From 8947e396a8296c5297928b60043f35dfa56baa05 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Thu, 14 May 2015 10:32:53 -0700 Subject: Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In commit 8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec" binding"), we added a generic "nor-jedec" binding to catch all mostly-compatible SPI NOR flash which can be detected via the READ ID opcode (0x9F). This was discussed and reviewed at the time, however objections have come up since then as part of this discussion: http://lkml.kernel.org/g/20150511224646.GJ32500@ld-irv-0074 It seems the parties involved agree that "jedec,spi-nor" does a better job of capturing the fact that this is SPI-specific, not just any NOR flash. This binding was only merged for v4.1-rc1, so it's still OK to change the naming. At the same time, let's move the documentation to a better name. Next up: stop referring to code (drivers/mtd/devices/m25p80.c) from the documentation. Signed-off-by: Brian Norris Cc: Marek Vasut Cc: Rafał Miłecki Cc: Rob Herring Cc: Pawel Moll Cc: Ian Campbell Cc: Kumar Gala Cc: devicetree@vger.kernel.org Acked-by: Stephen Warren Acked-by: Geert Uytterhoeven Acked-by: Mark Rutland --- .../devicetree/bindings/mtd/jedec,spi-nor.txt | 32 ++++++++++++++++++++++ Documentation/devicetree/bindings/mtd/m25p80.txt | 32 ---------------------- drivers/mtd/devices/m25p80.c | 6 ++-- 3 files changed, 35 insertions(+), 35 deletions(-) create mode 100644 Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt delete mode 100644 Documentation/devicetree/bindings/mtd/m25p80.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt new file mode 100644 index 000000000000..2bee68103b01 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt @@ -0,0 +1,32 @@ +* MTD SPI driver for ST M25Pxx (and similar) serial flash chips + +Required properties: +- #address-cells, #size-cells : Must be present if the device has sub-nodes + representing partitions. +- compatible : May include a device-specific string consisting of the + manufacturer and name of the chip. Bear in mind the DT binding + is not Linux-only, but in case of Linux, see the "m25p_ids" + table in drivers/mtd/devices/m25p80.c for the list of supported + chips. + Must also include "jedec,spi-nor" for any SPI NOR flash that can + be identified by the JEDEC READ ID opcode (0x9F). +- reg : Chip-Select number +- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at + +Optional properties: +- m25p,fast-read : Use the "fast read" opcode to read data from the chip instead + of the usual "read" opcode. This opcode is not supported by + all chips and support for it can not be detected at runtime. + Refer to your chips' datasheet to check if this is supported + by your chip. + +Example: + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + m25p,fast-read; + }; diff --git a/Documentation/devicetree/bindings/mtd/m25p80.txt b/Documentation/devicetree/bindings/mtd/m25p80.txt deleted file mode 100644 index f20b111b502a..000000000000 --- a/Documentation/devicetree/bindings/mtd/m25p80.txt +++ /dev/null @@ -1,32 +0,0 @@ -* MTD SPI driver for ST M25Pxx (and similar) serial flash chips - -Required properties: -- #address-cells, #size-cells : Must be present if the device has sub-nodes - representing partitions. -- compatible : May include a device-specific string consisting of the - manufacturer and name of the chip. Bear in mind the DT binding - is not Linux-only, but in case of Linux, see the "m25p_ids" - table in drivers/mtd/devices/m25p80.c for the list of supported - chips. - Must also include "nor-jedec" for any SPI NOR flash that can be - identified by the JEDEC READ ID opcode (0x9F). -- reg : Chip-Select number -- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at - -Optional properties: -- m25p,fast-read : Use the "fast read" opcode to read data from the chip instead - of the usual "read" opcode. This opcode is not supported by - all chips and support for it can not be detected at runtime. - Refer to your chips' datasheet to check if this is supported - by your chip. - -Example: - - flash: m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spansion,m25p80", "nor-jedec"; - reg = <0>; - spi-max-frequency = <40000000>; - m25p,fast-read; - }; diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 7c8b1694a134..3af137f49ac9 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -223,7 +223,7 @@ static int m25p_probe(struct spi_device *spi) */ if (data && data->type) flash_name = data->type; - else if (!strcmp(spi->modalias, "nor-jedec")) + else if (!strcmp(spi->modalias, "spi-nor")) flash_name = NULL; /* auto-detect */ else flash_name = spi->modalias; @@ -255,7 +255,7 @@ static int m25p_remove(struct spi_device *spi) * since most of these flash are compatible to some extent, and their * differences can often be differentiated by the JEDEC read-ID command, we * encourage new users to add support to the spi-nor library, and simply bind - * against a generic string here (e.g., "nor-jedec"). + * against a generic string here (e.g., "jedec,spi-nor"). * * Many flash names are kept here in this list (as well as in spi-nor.c) to * keep them available as module aliases for existing platforms. @@ -305,7 +305,7 @@ static const struct spi_device_id m25p_ids[] = { * Generic support for SPI NOR that can be identified by the JEDEC READ * ID opcode (0x9F). Use this, if possible. */ - {"nor-jedec"}, + {"spi-nor"}, { }, }; MODULE_DEVICE_TABLE(spi, m25p_ids); -- cgit v1.2.3 From ea8e080b604e2c8221af778221d83a59b6529c5b Mon Sep 17 00:00:00 2001 From: Aravind Gopalakrishnan Date: Mon, 18 May 2015 10:07:16 +0200 Subject: x86/Documentation: Update the contact email for L3 cache index disable functionality The mailing list discuss@x86-64.org is now defunct. Use the lkml in its place. Signed-off-by: Aravind Gopalakrishnan Signed-off-by: Borislav Petkov Cc: Greg KH Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-api@vger.kernel.org Cc: sboyd@codeaurora.org Cc: sudeep.holla@arm.com Link: http://lkml.kernel.org/r/1431125098-9470-1-git-send-email-Aravind.Gopalakrishnan@amd.com Link: http://lkml.kernel.org/r/1431936437-25286-2-git-send-email-bp@alien8.de [ Changed the contact email to lkml. ] Signed-off-by: Ingo Molnar --- Documentation/ABI/testing/sysfs-devices-system-cpu | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 99983e67c13c..da95513571ea 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -162,7 +162,7 @@ Description: Discover CPUs in the same CPU frequency coordination domain What: /sys/devices/system/cpu/cpu*/cache/index3/cache_disable_{0,1} Date: August 2008 KernelVersion: 2.6.27 -Contact: discuss@x86-64.org +Contact: Linux kernel mailing list Description: Disable L3 cache indices These files exist in every CPU's cache/index3 directory. Each -- cgit v1.2.3 From 6db99596d11a99f59e8f8f9353b22ef76e31ad6a Mon Sep 17 00:00:00 2001 From: Nathan Sullivan Date: Fri, 22 May 2015 09:22:09 -0500 Subject: net: macb: Document zynq gem dt binding Signed-off-by: Nathan Sullivan Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/cdns-emac.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/cdns-emac.txt b/Documentation/devicetree/bindings/net/cdns-emac.txt index abd67c13d344..4451ee973223 100644 --- a/Documentation/devicetree/bindings/net/cdns-emac.txt +++ b/Documentation/devicetree/bindings/net/cdns-emac.txt @@ -3,7 +3,8 @@ Required properties: - compatible: Should be "cdns,[-]{emac}" Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC. - or the generic form: "cdns,emac". + Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC. + Or the generic form: "cdns,emac". - reg: Address and length of the register set for the device - interrupts: Should contain macb interrupt - phy-mode: see ethernet.txt file in the same directory. -- cgit v1.2.3 From 3c99121ca5c5f79959c172a6297572a273f54fb6 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 20 May 2015 19:46:24 +0200 Subject: serial: sh-sci: Add DMA support to the DT binding documentation Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/serial/renesas,sci-serial.txt | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index ae73bb0e9ad9..b91fcff4b7d4 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -44,6 +44,11 @@ Required properties: Note: Each enabled SCIx UART should have an alias correctly numbered in the "aliases" node. +Optional properties: + - dmas: Must contain a list of two references to DMA specifiers, one for + transmission, and one for reception. + - dma-names: Must contain a list of two DMA names, "tx" and "rx". + Example: aliases { serial0 = &scifa0; @@ -56,4 +61,6 @@ Example: interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>; + dma-names = "tx", "rx"; }; -- cgit v1.2.3 From 0dd1e247fd39aed20fd2baacc62ca44d82534798 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Thu, 21 May 2015 17:26:23 +0100 Subject: drivers: PL011: add support for the ARM SBSA generic UART The ARM Server Base System Architecture[1] document describes a generic UART which is a subset of the PL011 UART. It lacks DMA support, baud rate control and modem status line control, among other things. The idea is to move the UART initialization and setup into the firmware (which does this job today already) and let the kernel just use the UART for sending and receiving characters. We use the recent refactoring to build a new struct uart_ops variable which points to some new functions avoiding access to the missing registers. We reuse as much existing PL011 code as possible. In contrast to the PL011 the SBSA UART does not define any AMBA or PrimeCell relations, so we go with a pretty generic probe function which only uses platform device functions. A DT binding is provided with this patch, ACPI support is added in a separate one. Signed-off-by: Andre Przywara Tested-by: Mark Langsdorf Tested-by: Naresh Bhat Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/serial/arm_sbsa_uart.txt | 10 ++ drivers/tty/serial/amba-pl011.c | 171 +++++++++++++++++++++ 2 files changed, 181 insertions(+) create mode 100644 Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt b/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt new file mode 100644 index 000000000000..4163e7eb7763 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt @@ -0,0 +1,10 @@ +* ARM SBSA defined generic UART +This UART uses a subset of the PL011 registers and consequently lives +in the PL011 driver. It's baudrate and other communication parameters +cannot be adjusted at runtime, so it lacks a clock specifier here. + +Required properties: +- compatible: must be "arm,sbsa-uart" +- reg: exactly one register range +- interrupts: exactly one interrupt specifier +- current-speed: the (fixed) baud rate set by the firmware diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 6558400f766f..c0850f3cc439 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -101,6 +101,14 @@ static struct vendor_data vendor_arm = { .get_fifosize = get_fifosize_arm, }; +static struct vendor_data vendor_sbsa = { + .oversampling = false, + .dma_threshold = false, + .cts_event_workaround = false, + .always_enabled = true, + .fixed_options = true, +}; + static unsigned int get_fifosize_st(struct amba_device *dev) { return 64; @@ -1641,6 +1649,28 @@ static int pl011_startup(struct uart_port *port) return retval; } +static int sbsa_uart_startup(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + int retval; + + retval = pl011_hwinit(port); + if (retval) + return retval; + + retval = pl011_allocate_irq(uap); + if (retval) + return retval; + + /* The SBSA UART does not support any modem status lines. */ + uap->old_status = 0; + + pl011_enable_interrupts(uap); + + return 0; +} + static void pl011_shutdown_channel(struct uart_amba_port *uap, unsigned int lcrh) { @@ -1721,6 +1751,19 @@ static void pl011_shutdown(struct uart_port *port) uap->port.ops->flush_buffer(port); } +static void sbsa_uart_shutdown(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + + pl011_disable_interrupts(uap); + + free_irq(uap->port.irq, uap); + + if (uap->port.ops->flush_buffer) + uap->port.ops->flush_buffer(port); +} + static void pl011_setup_status_masks(struct uart_port *port, struct ktermios *termios) { @@ -1872,6 +1915,27 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, spin_unlock_irqrestore(&port->lock, flags); } +static void +sbsa_uart_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + unsigned long flags; + + tty_termios_encode_baud_rate(termios, uap->fixed_baud, uap->fixed_baud); + + /* The SBSA UART only supports 8n1 without hardware flow control. */ + termios->c_cflag &= ~(CSIZE | CSTOPB | PARENB | PARODD); + termios->c_cflag &= ~(CMSPAR | CRTSCTS); + termios->c_cflag |= CS8 | CLOCAL; + + spin_lock_irqsave(&port->lock, flags); + uart_update_timeout(port, CS8, uap->fixed_baud); + pl011_setup_status_masks(port, termios); + spin_unlock_irqrestore(&port->lock, flags); +} + static const char *pl011_type(struct uart_port *port) { struct uart_amba_port *uap = @@ -1947,6 +2011,37 @@ static struct uart_ops amba_pl011_pops = { #endif }; +static void sbsa_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static unsigned int sbsa_uart_get_mctrl(struct uart_port *port) +{ + return 0; +} + +static const struct uart_ops sbsa_uart_pops = { + .tx_empty = pl011_tx_empty, + .set_mctrl = sbsa_uart_set_mctrl, + .get_mctrl = sbsa_uart_get_mctrl, + .stop_tx = pl011_stop_tx, + .start_tx = pl011_start_tx, + .stop_rx = pl011_stop_rx, + .startup = sbsa_uart_startup, + .shutdown = sbsa_uart_shutdown, + .set_termios = sbsa_uart_set_termios, + .type = pl011_type, + .release_port = pl011_release_port, + .request_port = pl011_request_port, + .config_port = pl011_config_port, + .verify_port = pl011_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_init = pl011_hwinit, + .poll_get_char = pl011_get_poll_char, + .poll_put_char = pl011_put_poll_char, +#endif +}; + static struct uart_amba_port *amba_ports[UART_NR]; #ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE @@ -2327,6 +2422,79 @@ static int pl011_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume); +static int sbsa_uart_probe(struct platform_device *pdev) +{ + struct uart_amba_port *uap; + struct resource *r; + int portnr, ret; + int baudrate; + + /* + * Check the mandatory baud rate parameter in the DT node early + * so that we can easily exit with the error. + */ + if (pdev->dev.of_node) { + struct device_node *np = pdev->dev.of_node; + + ret = of_property_read_u32(np, "current-speed", &baudrate); + if (ret) + return ret; + } else { + baudrate = 115200; + } + + portnr = pl011_find_free_port(); + if (portnr < 0) + return portnr; + + uap = devm_kzalloc(&pdev->dev, sizeof(struct uart_amba_port), + GFP_KERNEL); + if (!uap) + return -ENOMEM; + + uap->vendor = &vendor_sbsa; + uap->fifosize = 32; + uap->port.irq = platform_get_irq(pdev, 0); + uap->port.ops = &sbsa_uart_pops; + uap->fixed_baud = baudrate; + + snprintf(uap->type, sizeof(uap->type), "SBSA"); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + ret = pl011_setup_port(&pdev->dev, uap, r, portnr); + if (ret) + return ret; + + platform_set_drvdata(pdev, uap); + + return pl011_register_port(uap); +} + +static int sbsa_uart_remove(struct platform_device *pdev) +{ + struct uart_amba_port *uap = platform_get_drvdata(pdev); + + uart_remove_one_port(&amba_reg, &uap->port); + pl011_unregister_port(uap); + return 0; +} + +static const struct of_device_id sbsa_uart_of_match[] = { + { .compatible = "arm,sbsa-uart", }, + {}, +}; +MODULE_DEVICE_TABLE(of, sbsa_uart_of_match); + +static struct platform_driver arm_sbsa_uart_platform_driver = { + .probe = sbsa_uart_probe, + .remove = sbsa_uart_remove, + .driver = { + .name = "sbsa-uart", + .of_match_table = of_match_ptr(sbsa_uart_of_match), + }, +}; + static struct amba_id pl011_ids[] = { { .id = 0x00041011, @@ -2357,11 +2525,14 @@ static int __init pl011_init(void) { printk(KERN_INFO "Serial: AMBA PL011 UART driver\n"); + if (platform_driver_register(&arm_sbsa_uart_platform_driver)) + pr_warn("could not register SBSA UART platform driver\n"); return amba_driver_register(&pl011_driver); } static void __exit pl011_exit(void) { + platform_driver_unregister(&arm_sbsa_uart_platform_driver); amba_driver_unregister(&pl011_driver); } -- cgit v1.2.3 From 7cc99f1e9ae0e657c9a9126d042a342ea786ef08 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 8 Apr 2015 19:42:24 +0900 Subject: usb: renesas_usbhs: Revise the binding document about the dma-names Since the DT should describe the hardware (not the driver limitation), This patch revises the binding document about the dma-names to change simple numbering as "ch%d" instead of "tx" and "rx". Also this patch fixes the actual code of renesas_usbhs driver to handle the new dma-names. Signed-off-by: Yoshihiro Shimoda Acked-by: Mark Rutland Acked-by: Geert Uytterhoeven Signed-off-by: Felipe Balbi --- .../devicetree/bindings/usb/renesas_usbhs.txt | 6 ++---- drivers/usb/renesas_usbhs/fifo.c | 24 ++++++++++++++-------- 2 files changed, 17 insertions(+), 13 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt index dc2a18f0b3a1..ddbe304beb21 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt @@ -15,10 +15,8 @@ Optional properties: - phys: phandle + phy specifier pair - phy-names: must be "usb" - dmas: Must contain a list of references to DMA specifiers. - - dma-names : Must contain a list of DMA names: - - tx0 ... tx - - rx0 ... rx - - This means DnFIFO in USBHS module. + - dma-names : named "ch%d", where %d is the channel number ranging from zero + to the number of channels (DnFIFOs) minus one. Example: usbhs: usb@e6590000 { diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index 8597cf9cfceb..bc23b4a2c415 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -1227,15 +1227,21 @@ static void usbhsf_dma_init_dt(struct device *dev, struct usbhs_fifo *fifo, { char name[16]; - snprintf(name, sizeof(name), "tx%d", channel); - fifo->tx_chan = dma_request_slave_channel_reason(dev, name); - if (IS_ERR(fifo->tx_chan)) - fifo->tx_chan = NULL; - - snprintf(name, sizeof(name), "rx%d", channel); - fifo->rx_chan = dma_request_slave_channel_reason(dev, name); - if (IS_ERR(fifo->rx_chan)) - fifo->rx_chan = NULL; + /* + * To avoid complex handing for DnFIFOs, the driver uses each + * DnFIFO as TX or RX direction (not bi-direction). + * So, the driver uses odd channels for TX, even channels for RX. + */ + snprintf(name, sizeof(name), "ch%d", channel); + if (channel & 1) { + fifo->tx_chan = dma_request_slave_channel_reason(dev, name); + if (IS_ERR(fifo->tx_chan)) + fifo->tx_chan = NULL; + } else { + fifo->rx_chan = dma_request_slave_channel_reason(dev, name); + if (IS_ERR(fifo->rx_chan)) + fifo->rx_chan = NULL; + } } static void usbhsf_dma_init(struct usbhs_priv *priv, struct usbhs_fifo *fifo, -- cgit v1.2.3 From 9aecac04d8d89e730ae362a748113b19c06a9d39 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 27 May 2015 16:11:48 -0700 Subject: hwmon: (tmp401) Do not auto-detect chip on I2C address 0x37 I2C address 0x37 may be used by EEPROMs, which can result in false positives. Do not attempt to detect a chip at this address. Reviewed-by: Jean Delvare Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Guenter Roeck --- Documentation/hwmon/tmp401 | 2 +- drivers/hwmon/tmp401.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/tmp401 b/Documentation/hwmon/tmp401 index 8eb88e974055..711f75e189eb 100644 --- a/Documentation/hwmon/tmp401 +++ b/Documentation/hwmon/tmp401 @@ -20,7 +20,7 @@ Supported chips: Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp432.html * Texas Instruments TMP435 Prefix: 'tmp435' - Addresses scanned: I2C 0x37, 0x48 - 0x4f + Addresses scanned: I2C 0x48 - 0x4f Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp435.html Authors: diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c index 99664ebc738d..ccf4cffe0ee1 100644 --- a/drivers/hwmon/tmp401.c +++ b/drivers/hwmon/tmp401.c @@ -44,7 +44,7 @@ #include /* Addresses to scan */ -static const unsigned short normal_i2c[] = { 0x37, 0x48, 0x49, 0x4a, 0x4c, 0x4d, +static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 }; -- cgit v1.2.3 From cf87edc6022d1fe7efa6b8ce1a99f2ef6a1b27f9 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Tue, 19 May 2015 14:44:38 -0700 Subject: target/user: Update example code for new ABI requirements We now require that the userspace handler set a bit if the command is not handled. Update calls to tcmu_hdr_get_op for v2. Signed-off-by: Andy Grover Reviewed-by: Ilias Tsitsimpis Signed-off-by: Nicholas Bellinger --- Documentation/target/tcmu-design.txt | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/target/tcmu-design.txt b/Documentation/target/tcmu-design.txt index c80bf1ed8981..b495108c433c 100644 --- a/Documentation/target/tcmu-design.txt +++ b/Documentation/target/tcmu-design.txt @@ -324,7 +324,7 @@ int handle_device_events(int fd, void *map) /* Process events from cmd ring until we catch up with cmd_head */ while (ent != (void *)mb + mb->cmdr_off + mb->cmd_head) { - if (tcmu_hdr_get_op(&ent->hdr) == TCMU_OP_CMD) { + if (tcmu_hdr_get_op(ent->hdr.len_op) == TCMU_OP_CMD) { uint8_t *cdb = (void *)mb + ent->req.cdb_off; bool success = true; @@ -339,8 +339,12 @@ int handle_device_events(int fd, void *map) ent->rsp.scsi_status = SCSI_CHECK_CONDITION; } } + else if (tcmu_hdr_get_op(ent->hdr.len_op) != TCMU_OP_PAD) { + /* Tell the kernel we didn't handle unknown opcodes */ + ent->hdr.uflags |= TCMU_UFLAG_UNKNOWN_OP; + } else { - /* Do nothing for PAD entries */ + /* Do nothing for PAD entries except update cmd_tail */ } /* update cmd_tail */ -- cgit v1.2.3 From 9c1cd1b68cd15c81d12a0cf2402129475882b620 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Tue, 19 May 2015 14:44:39 -0700 Subject: target/user: Only support full command pass-through After much discussion, give up on only passing a subset of SCSI commands to userspace and pass them all. Based on what pscsi is doing, make sure to set SCF_SCSI_DATA_CDB for I/O ops, and define attributes identical to pscsi. Make hw_block_size configurable via dev param. Remove mention of command filtering from tcmu-design.txt. Signed-off-by: Andy Grover Reviewed-by: Ilias Tsitsimpis Signed-off-by: Nicholas Bellinger --- Documentation/target/tcmu-design.txt | 21 +----- drivers/target/target_core_user.c | 124 +++++++++++++++++++++-------------- 2 files changed, 75 insertions(+), 70 deletions(-) (limited to 'Documentation') diff --git a/Documentation/target/tcmu-design.txt b/Documentation/target/tcmu-design.txt index b495108c433c..263b907517ac 100644 --- a/Documentation/target/tcmu-design.txt +++ b/Documentation/target/tcmu-design.txt @@ -15,8 +15,7 @@ Contents: a) Discovering and configuring TCMU uio devices b) Waiting for events on the device(s) c) Managing the command ring -3) Command filtering -4) A final note +3) A final note TCM Userspace Design @@ -364,24 +363,6 @@ int handle_device_events(int fd, void *map) } -Command filtering ------------------ - -Initial TCMU support is for a filtered commandset. Only IO-related -commands are presented to userspace, and the rest are handled by LIO's -in-kernel command emulation. The commands presented are all versions -of: - -READ -WRITE -WRITE_VERIFY -XDWRITEREAD -WRITE_SAME -COMPARE_AND_WRITE -SYNCHRONIZE_CACHE -UNMAP - - A final note ------------ diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index 0e0feeaec39c..90e084ea7b92 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -938,12 +938,13 @@ static void tcmu_free_device(struct se_device *dev) } enum { - Opt_dev_config, Opt_dev_size, Opt_err, + Opt_dev_config, Opt_dev_size, Opt_hw_block_size, Opt_err, }; static match_table_t tokens = { {Opt_dev_config, "dev_config=%s"}, {Opt_dev_size, "dev_size=%u"}, + {Opt_hw_block_size, "hw_block_size=%u"}, {Opt_err, NULL} }; @@ -954,6 +955,7 @@ static ssize_t tcmu_set_configfs_dev_params(struct se_device *dev, char *orig, *ptr, *opts, *arg_p; substring_t args[MAX_OPT_ARGS]; int ret = 0, token; + unsigned long tmp_ul; opts = kstrdup(page, GFP_KERNEL); if (!opts) @@ -986,6 +988,24 @@ static ssize_t tcmu_set_configfs_dev_params(struct se_device *dev, if (ret < 0) pr_err("kstrtoul() failed for dev_size=\n"); break; + case Opt_hw_block_size: + arg_p = match_strdup(&args[0]); + if (!arg_p) { + ret = -ENOMEM; + break; + } + ret = kstrtoul(arg_p, 0, &tmp_ul); + kfree(arg_p); + if (ret < 0) { + pr_err("kstrtoul() failed for hw_block_size=\n"); + break; + } + if (!tmp_ul) { + pr_err("hw_block_size must be nonzero\n"); + break; + } + dev->dev_attrib.hw_block_size = tmp_ul; + break; default: break; } @@ -1016,12 +1036,9 @@ static sector_t tcmu_get_blocks(struct se_device *dev) } static sense_reason_t -tcmu_execute_rw(struct se_cmd *se_cmd, struct scatterlist *sgl, u32 sgl_nents, - enum dma_data_direction data_direction) +tcmu_pass_op(struct se_cmd *se_cmd) { - int ret; - - ret = tcmu_queue_cmd(se_cmd); + int ret = tcmu_queue_cmd(se_cmd); if (ret != 0) return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; @@ -1030,62 +1047,69 @@ tcmu_execute_rw(struct se_cmd *se_cmd, struct scatterlist *sgl, u32 sgl_nents, } static sense_reason_t -tcmu_pass_op(struct se_cmd *se_cmd) +tcmu_parse_cdb(struct se_cmd *cmd) { - int ret = tcmu_queue_cmd(se_cmd); + unsigned char *cdb = cmd->t_task_cdb; - if (ret != 0) - return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; - else + /* + * For REPORT LUNS we always need to emulate the response, for everything + * else, pass it up. + */ + if (cdb[0] == REPORT_LUNS) { + cmd->execute_cmd = spc_emulate_report_luns; return TCM_NO_SENSE; -} + } -static struct sbc_ops tcmu_sbc_ops = { - .execute_rw = tcmu_execute_rw, - .execute_sync_cache = tcmu_pass_op, - .execute_write_same = tcmu_pass_op, - .execute_write_same_unmap = tcmu_pass_op, - .execute_unmap = tcmu_pass_op, -}; + /* Set DATA_CDB flag for ops that should have it */ + switch (cdb[0]) { + case READ_6: + case READ_10: + case READ_12: + case READ_16: + case WRITE_6: + case WRITE_10: + case WRITE_12: + case WRITE_16: + case WRITE_VERIFY: + case WRITE_VERIFY_12: + case 0x8e: /* WRITE_VERIFY_16 */ + case COMPARE_AND_WRITE: + case XDWRITEREAD_10: + cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; + break; + case VARIABLE_LENGTH_CMD: + switch (get_unaligned_be16(&cdb[8])) { + case READ_32: + case WRITE_32: + case 0x0c: /* WRITE_VERIFY_32 */ + case XDWRITEREAD_32: + cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; + break; + } + } -static sense_reason_t -tcmu_parse_cdb(struct se_cmd *cmd) -{ - return sbc_parse_cdb(cmd, &tcmu_sbc_ops); + cmd->execute_cmd = tcmu_pass_op; + + return TCM_NO_SENSE; } -DEF_TB_DEFAULT_ATTRIBS(tcmu); +DEF_TB_DEV_ATTRIB_RO(tcmu, hw_pi_prot_type); +TB_DEV_ATTR_RO(tcmu, hw_pi_prot_type); + +DEF_TB_DEV_ATTRIB_RO(tcmu, hw_block_size); +TB_DEV_ATTR_RO(tcmu, hw_block_size); + +DEF_TB_DEV_ATTRIB_RO(tcmu, hw_max_sectors); +TB_DEV_ATTR_RO(tcmu, hw_max_sectors); + +DEF_TB_DEV_ATTRIB_RO(tcmu, hw_queue_depth); +TB_DEV_ATTR_RO(tcmu, hw_queue_depth); static struct configfs_attribute *tcmu_backend_dev_attrs[] = { - &tcmu_dev_attrib_emulate_model_alias.attr, - &tcmu_dev_attrib_emulate_dpo.attr, - &tcmu_dev_attrib_emulate_fua_write.attr, - &tcmu_dev_attrib_emulate_fua_read.attr, - &tcmu_dev_attrib_emulate_write_cache.attr, - &tcmu_dev_attrib_emulate_ua_intlck_ctrl.attr, - &tcmu_dev_attrib_emulate_tas.attr, - &tcmu_dev_attrib_emulate_tpu.attr, - &tcmu_dev_attrib_emulate_tpws.attr, - &tcmu_dev_attrib_emulate_caw.attr, - &tcmu_dev_attrib_emulate_3pc.attr, - &tcmu_dev_attrib_pi_prot_type.attr, &tcmu_dev_attrib_hw_pi_prot_type.attr, - &tcmu_dev_attrib_pi_prot_format.attr, - &tcmu_dev_attrib_enforce_pr_isids.attr, - &tcmu_dev_attrib_is_nonrot.attr, - &tcmu_dev_attrib_emulate_rest_reord.attr, - &tcmu_dev_attrib_force_pr_aptpl.attr, &tcmu_dev_attrib_hw_block_size.attr, - &tcmu_dev_attrib_block_size.attr, &tcmu_dev_attrib_hw_max_sectors.attr, - &tcmu_dev_attrib_optimal_sectors.attr, &tcmu_dev_attrib_hw_queue_depth.attr, - &tcmu_dev_attrib_queue_depth.attr, - &tcmu_dev_attrib_max_unmap_lba_count.attr, - &tcmu_dev_attrib_max_unmap_block_desc_count.attr, - &tcmu_dev_attrib_unmap_granularity.attr, - &tcmu_dev_attrib_unmap_granularity_alignment.attr, - &tcmu_dev_attrib_max_write_same_len.attr, NULL, }; @@ -1094,7 +1118,7 @@ static struct se_subsystem_api tcmu_template = { .inquiry_prod = "USER", .inquiry_rev = TCMU_VERSION, .owner = THIS_MODULE, - .transport_type = TRANSPORT_PLUGIN_VHBA_PDEV, + .transport_type = TRANSPORT_PLUGIN_PHBA_PDEV, .attach_hba = tcmu_attach_hba, .detach_hba = tcmu_detach_hba, .alloc_device = tcmu_alloc_device, -- cgit v1.2.3 From 8f4a91202203624cbd8fe565cbdd5c876b652a5d Mon Sep 17 00:00:00 2001 From: Rama Kiran Kumar Indrakanti Date: Mon, 25 May 2015 11:51:10 +0530 Subject: sc16is7xx: spi interface documentation Updated the documentation for spi interface. Signed-off-by: Rama Kiran Kumar Indrakanti Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/serial/nxp,sc16is7xx.txt | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt index 246c795668dc..fbfe53635a3a 100644 --- a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt +++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt @@ -1,4 +1,5 @@ * NXP SC16IS7xx advanced Universal Asynchronous Receiver-Transmitter (UART) +* i2c as bus Required properties: - compatible: Should be one of the following: @@ -31,3 +32,39 @@ Example: gpio-controller; #gpio-cells = <2>; }; + +* spi as bus + +Required properties: +- compatible: Should be one of the following: + - "nxp,sc16is740" for NXP SC16IS740, + - "nxp,sc16is741" for NXP SC16IS741, + - "nxp,sc16is750" for NXP SC16IS750, + - "nxp,sc16is752" for NXP SC16IS752, + - "nxp,sc16is760" for NXP SC16IS760, + - "nxp,sc16is762" for NXP SC16IS762. +- reg: SPI chip select number. +- interrupt-parent: The phandle for the interrupt controller that + services interrupts for this IC. +- interrupts: Specifies the interrupt source of the parent interrupt + controller. The format of the interrupt specifier depends on the + parent interrupt controller. +- clocks: phandle to the IC source clock. + +Optional properties: +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells: Should be two. The first cell is the GPIO number and + the second cell is used to specify the GPIO polarity: + 0 = active high, + 1 = active low. + +Example: + sc16is750: sc16is750@0 { + compatible = "nxp,sc16is750"; + reg = <0>; + clocks = <&clk20m>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + }; -- cgit v1.2.3 From 6e63be3fee141cc6d122f648b524a66160dbe6aa Mon Sep 17 00:00:00 2001 From: Noam Camus Date: Mon, 25 May 2015 06:54:28 +0300 Subject: serial: earlycon: Add support for big-endian MMIO accesses Support command line parameters of the form: earlycon=,io|mmio|mmio32|mmio32be,, This commit seem to be needed even after commit: serial: 8250: Add support for big-endian MMIO accesses c627f2ceb692e8a9358b64ac2d139314e7bb0d17 Signed-off-by: Noam Camus Signed-off-by: Greg Kroah-Hartman --- Documentation/kernel-parameters.txt | 9 +++++---- drivers/tty/serial/earlycon.c | 9 ++++++--- drivers/tty/serial/serial_core.c | 7 +++++-- 3 files changed, 16 insertions(+), 9 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 61ab1628a057..55bb093a08a3 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -959,14 +959,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted. uart[8250],io,[,options] uart[8250],mmio,[,options] uart[8250],mmio32,[,options] + uart[8250],mmio32be,[,options] uart[8250],0x[,options] Start an early, polled-mode console on the 8250/16550 UART at the specified I/O port or MMIO address. MMIO inter-register address stride is either 8-bit - (mmio) or 32-bit (mmio32). - If none of [io|mmio|mmio32], is assumed to be - equivalent to 'mmio'. 'options' are specified in the - same format described for "console=ttyS"; if + (mmio) or 32-bit (mmio32 or mmio32be). + If none of [io|mmio|mmio32|mmio32be], is assumed + to be equivalent to 'mmio'. 'options' are specified + in the same format described for "console=ttyS"; if unspecified, the h/w is not initialized. pl011, diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c index 6dc471e30e79..f09636083426 100644 --- a/drivers/tty/serial/earlycon.c +++ b/drivers/tty/serial/earlycon.c @@ -72,6 +72,7 @@ static int __init parse_options(struct earlycon_device *device, char *options) switch (port->iotype) { case UPIO_MEM32: + case UPIO_MEM32BE: port->regshift = 2; /* fall-through */ case UPIO_MEM: port->mapbase = addr; @@ -90,9 +91,11 @@ static int __init parse_options(struct earlycon_device *device, char *options) strlcpy(device->options, options, length); } - if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM32) + if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM32 || + port->iotype == UPIO_MEM32BE) pr_info("Early serial console at MMIO%s 0x%llx (options '%s')\n", - (port->iotype == UPIO_MEM32) ? "32" : "", + (port->iotype == UPIO_MEM) ? "" : + (port->iotype == UPIO_MEM32) ? "32" : "32be", (unsigned long long)port->mapbase, device->options); else @@ -133,7 +136,7 @@ static int __init register_earlycon(char *buf, const struct earlycon_id *match) * * Registers the earlycon console matching the earlycon specified * in the param string @buf. Acceptable param strings are of the form - * ,io|mmio|mmio32,, + * ,io|mmio|mmio32|mmio32be,, * ,0x, * , * diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index eec067d8eedb..860e59fd6ef4 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1814,8 +1814,8 @@ uart_get_console(struct uart_port *ports, int nr, struct console *co) * @options: ptr for field; NULL if not present (out) * * Decodes earlycon kernel command line parameters of the form - * earlycon=,io|mmio|mmio32,, - * console=,io|mmio|mmio32,, + * earlycon=,io|mmio|mmio32|mmio32be,, + * console=,io|mmio|mmio32|mmio32be,, * * The optional form * earlycon=,0x, @@ -1833,6 +1833,9 @@ int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr, } else if (strncmp(p, "mmio32,", 7) == 0) { *iotype = UPIO_MEM32; p += 7; + } else if (strncmp(p, "mmio32be,", 9) == 0) { + *iotype = UPIO_MEM32BE; + p += 9; } else if (strncmp(p, "io,", 3) == 0) { *iotype = UPIO_PORT; p += 3; -- cgit v1.2.3 From a7a215283703231bcde0740710569f6c0e39ac53 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Sat, 30 May 2015 23:14:45 +0200 Subject: doc: dt: add documentation for nxp,lpc1850-uart Add device tree binding documentation for nxp,lpc1850-uart. Signed-off-by: Joachim Eastwood Signed-off-by: Greg Kroah-Hartman --- .../bindings/serial/nxp,lpc1850-uart.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt b/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt new file mode 100644 index 000000000000..04e23e63ee4f --- /dev/null +++ b/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt @@ -0,0 +1,28 @@ +* NXP LPC1850 UART + +Required properties: +- compatible : "nxp,lpc1850-uart", "ns16550a". +- reg : offset and length of the register set for the device. +- interrupts : should contain uart interrupt. +- clocks : phandle to the input clocks. +- clock-names : required elements: "uartclk", "reg". + +Optional properties: +- dmas : Two or more DMA channel specifiers following the + convention outlined in bindings/dma/dma.txt +- dma-names : Names for the dma channels, if present. There must + be at least one channel named "tx" for transmit + and named "rx" for receive. + +Since it's also possible to also use the of_serial.c driver all +parameters from 8250.txt also apply but are optional. + +Example: +uart0: serial@40081000 { + compatible = "nxp,lpc1850-uart", "ns16550a"; + reg = <0x40081000 0x1000>; + reg-shift = <2>; + interrupts = <24>; + clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>; + clock-names = "uartclk", "reg"; +}; -- cgit v1.2.3