From 97ea1906b3c2201273ea6bb40c43c611c056ddb3 Mon Sep 17 00:00:00 2001 From: Marcin Niestroj Date: Fri, 16 Sep 2016 11:26:28 +0200 Subject: rtc: omap: Support ext_wakeup configuration Support configuration of ext_wakeup sources. This patch makes it possible to enable ext_wakeup and set it's polarity, depending on board configuration. AM335x's dedicated PMIC (tps65217) uses ext_wakeup to notify about power-button presses. Handling power-button presses enables to recover from RTC-only power states correctly. Signed-off-by: Marcin Niestroj Acked-by: Tony Lindgren Acked-by: Rob Herring Signed-off-by: Alexandre Belloni --- Documentation/devicetree/bindings/rtc/rtc-omap.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt index bf7d11ae9bea..bee41f97044e 100644 --- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt +++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt @@ -18,6 +18,18 @@ Optional properties: through pmic_power_en - clocks: Any internal or external clocks feeding in to rtc - clock-names: Corresponding names of the clocks +- pinctrl-0: a phandle pointing to the pin settings for the device +- pinctrl-names: should be "default" + +Optional subnodes: +- generic pinctrl node + +Required pinctrl subnodes properties: +- pins - Names of ext_wakeup pins to configure + +Optional pinctrl subnodes properties: +- input-enable - Enables ext_wakeup +- ti,active-high - Set input active high (by default active low) Example: @@ -30,4 +42,13 @@ rtc@1c23000 { system-power-controller; clocks = <&clk_32k_rtc>, <&clk_32768_ck>; clock-names = "ext-clk", "int-clk"; + + pinctrl-0 = <&ext_wakeup>; + pinctrl-names = "default"; + + ext_wakeup: ext-wakeup { + pins = "ext_wakeup0"; + input-enable; + ti,active-high; + }; }; -- cgit v1.2.3