From f37a7238d379bc2befbcb08a03de03f4f446131c Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 24 Oct 2007 18:26:22 +0200 Subject: [SCSI] 53c7xx: fix removal fallout This patch does some additional cleanups after the 53c7xx removal. Signed-off-by: Adrian Bunk Acked-by: Geert Uytterhoeven Signed-off-by: James Bottomley --- Documentation/dontdiff | 2 -- Documentation/m68k/kernel-options.txt | 60 ----------------------------------- Documentation/scsi/00-INDEX | 2 -- Documentation/scsi/ncr53c7xx.txt | 40 ----------------------- 4 files changed, 104 deletions(-) delete mode 100644 Documentation/scsi/ncr53c7xx.txt (limited to 'Documentation') diff --git a/Documentation/dontdiff b/Documentation/dontdiff index f2d658a6a942..c09a96b99354 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -46,8 +46,6 @@ .mailmap .mm 53c700_d.h -53c7xx_d.h -53c7xx_u.h 53c8xx_d.h* BitKeeper COPYING diff --git a/Documentation/m68k/kernel-options.txt b/Documentation/m68k/kernel-options.txt index 248589e8bcf5..c93bed66e25d 100644 --- a/Documentation/m68k/kernel-options.txt +++ b/Documentation/m68k/kernel-options.txt @@ -867,66 +867,6 @@ controller and should be autodetected by the driver. An example is the 24 bit region which is specified by a mask of 0x00fffffe. -5.5) 53c7xx= ------------- - -Syntax: 53c7xx= - -These options affect the A4000T, A4091, WarpEngine, Blizzard 603e+, -and GForce 040/060 SCSI controllers on the Amiga, as well as the -builtin MVME 16x SCSI controller. - -The is a comma-separated list of the sub-options listed -below. - -5.5.1) nosync -------------- - -Syntax: nosync:0 - - Disables sync negotiation for all devices. Any value after the - colon is acceptable (and has the same effect). - -5.5.2) noasync --------------- - -[OBSOLETE, REMOVED] - -5.5.3) nodisconnect -------------------- - -Syntax: nodisconnect:0 - - Disables SCSI disconnects. Any value after the colon is acceptable - (and has the same effect). - -5.5.4) validids ---------------- - -Syntax: validids:0xNN - - Specify which SCSI ids the driver should pay attention to. This is - a bitmask (i.e. to only pay attention to ID#4, you'd use 0x10). - Default is 0x7f (devices 0-6). - -5.5.5) opthi -5.5.6) optlo ------------- - -Syntax: opthi:M,optlo:N - - Specify options for "hostdata->options". The acceptable definitions - are listed in drivers/scsi/53c7xx.h; the 32 high bits should be in - opthi and the 32 low bits in optlo. They must be specified in the - order opthi=M,optlo=N. - -5.5.7) next ------------ - - No argument. Used to separate blocks of keywords when there's more - than one 53c7xx host adapter in the system. - - /* Local Variables: */ /* mode: text */ /* End: */ diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX index aa1f7e927834..c2e18e109858 100644 --- a/Documentation/scsi/00-INDEX +++ b/Documentation/scsi/00-INDEX @@ -64,8 +64,6 @@ lpfc.txt - LPFC driver release notes megaraid.txt - Common Management Module, shared code handling ioctls for LSI drivers -ncr53c7xx.txt - - info on driver for NCR53c7xx based adapters ncr53c8xx.txt - info on driver for NCR53c8xx based adapters osst.txt diff --git a/Documentation/scsi/ncr53c7xx.txt b/Documentation/scsi/ncr53c7xx.txt deleted file mode 100644 index 91e9552d63e5..000000000000 --- a/Documentation/scsi/ncr53c7xx.txt +++ /dev/null @@ -1,40 +0,0 @@ -README for WarpEngine/A4000T/A4091 SCSI kernels. - -Use the following options to disable options in the SCSI driver. - -Using amiboot for example..... - -To disable Synchronous Negotiation.... - - amiboot -k kernel 53c7xx=nosync:0 - -To disable Disconnection.... - - amiboot -k kernel 53c7xx=nodisconnect:0 - -To disable certain SCSI devices... - - amiboot -k kernel 53c7xx=validids:0x3F - - this allows only device ID's 0,1,2,3,4 and 5 for linux to handle. - (this is a bitmasked field - i.e. each bit represents a SCSI ID) - -These commands work on a per controller basis and use the option 'next' to -move to the next controller in the system. - -e.g. - amiboot -k kernel 53c7xx=nodisconnect:0,next,nosync:0 - - this uses No Disconnection on the first controller and Asynchronous - SCSI on the second controller. - -Known Issues: - -Two devices are known not to function with the default settings of using -synchronous SCSI. These are the Archive Viper 150 Tape Drive and the -SyQuest SQ555 removeable hard drive. When using these devices on a controller -use the 'nosync:0' option. - -Please try these options and post any problems/successes to me. - -Alan Hourihane -- cgit v1.2.3 From eb44820c28bc9a042e1157b41c677018a8fdfc74 Mon Sep 17 00:00:00 2001 From: Rob Landley Date: Sat, 3 Nov 2007 13:30:39 -0500 Subject: [SCSI] Add Documentation and integrate into docbook build Add Documentation/DocBook/scsi_midlayer.tmpl, add to Makefile, and update lots of kerneldoc comments in drivers/scsi/*. Updated with comments from Stefan Richter, Stephen M. Cameron, James Bottomley and Randy Dunlap. Signed-off-by: Rob Landley Signed-off-by: James Bottomley --- Documentation/DocBook/Makefile | 2 +- Documentation/DocBook/scsi_midlayer.tmpl | 409 +++++++++++++++++++++++++++++++ drivers/scsi/constants.c | 1 - drivers/scsi/hosts.c | 4 +- drivers/scsi/scsi.c | 183 +++++++------- drivers/scsi/scsi_devinfo.c | 34 ++- drivers/scsi/scsi_error.c | 46 ++-- drivers/scsi/scsi_ioctl.c | 24 +- drivers/scsi/scsi_lib.c | 42 ++-- drivers/scsi/scsi_netlink.c | 19 +- drivers/scsi/scsi_proc.c | 110 ++++++++- drivers/scsi/scsi_scan.c | 32 ++- drivers/scsi/scsi_transport_fc.c | 102 ++++---- drivers/scsi/scsi_transport_iscsi.c | 17 +- drivers/scsi/scsi_transport_sas.c | 40 +-- drivers/scsi/scsi_transport_srp.c | 10 +- drivers/scsi/scsicam.c | 35 ++- 17 files changed, 821 insertions(+), 289 deletions(-) create mode 100644 Documentation/DocBook/scsi_midlayer.tmpl (limited to 'Documentation') diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 4953bc258729..c6c5e59daaca 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -11,7 +11,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \ procfs-guide.xml writing_usb_driver.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ - genericirq.xml s390-drivers.xml uio-howto.xml + genericirq.xml s390-drivers.xml uio-howto.xml scsi_midlayer.xml ### # The build process is as follows (targets): diff --git a/Documentation/DocBook/scsi_midlayer.tmpl b/Documentation/DocBook/scsi_midlayer.tmpl new file mode 100644 index 000000000000..6255930216b3 --- /dev/null +++ b/Documentation/DocBook/scsi_midlayer.tmpl @@ -0,0 +1,409 @@ + + + + + + SCSI Mid Layer Guide + + + + James + Bottomley + +
+ James.Bottomley@steeleye.com +
+ + + + + Rob + Landley + +
+ rob@landley.net +
+ + + + + + + 2007 + Linux Foundation + + + + + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License version 2. + + + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + For more details see the file COPYING in the source + distribution of Linux. + + + + + + + + Introduction + + Protocol vs bus + + Once upon a time, the Small Computer Systems Interface defined both + a parallel I/O bus and a data protocol to connect a wide variety of + peripherals (disk drives, tape drives, modems, printers, scanners, + optical drives, test equipment, and medical devices) to a host + computer. + + + Although the old parallel (fast/wide/ultra) SCSI bus has largely + fallen out of use, the SCSI command set is more widely used than ever + to communicate with devices over a number of different busses. + + + The SCSI protocol + is a big-endian peer-to-peer packet based protocol. SCSI commands + are 6, 10, 12, or 16 bytes long, often followed by an associated data + payload. + + + SCSI commands can be transported over just about any kind of bus, and + are the default protocol for storage devices attached to USB, SATA, + SAS, Fibre Channel, FireWire, and ATAPI devices. SCSI packets are + also commonly exchanged over Infiniband, + I20, TCP/IP + (iSCSI), even + Parallel + ports. + + + + Design of the Linux SCSI subsystem + + The SCSI subsystem uses a three layer design, with upper, mid, and low + layers. Every operation involving the SCSI subsystem (such as reading + a sector from a disk) uses one driver at each of the 3 levels: one + upper layer driver, one lower layer driver, and the scsi midlayer. + + + The SCSI upper layer provides the interface between userspace and the + kernel, in the form of block and char device nodes for I/O and + ioctl(). The SCSI lower layer contains drivers for specific hardware + devices. + + + In between is the SCSI mid-layer, analogous to a network routing + layer such as the IPv4 stack. The SCSI mid-layer routes a packet + based data protocol between the upper layer's /dev nodes and the + corresponding devices in the lower layer. It manages command queues, + provides error handling and power management functions, and responds + to ioctl() requests. + + + + + + SCSI upper layer + + The upper layer supports the user-kernel interface by providing + device nodes. + + + sd (SCSI Disk) + sd (sd_mod.o) + + + + sr (SCSI CD-ROM) + sr (sr_mod.o) + + + st (SCSI Tape) + st (st.o) + + + sg (SCSI Generic) + sg (sg.o) + + + ch (SCSI Media Changer) + ch (ch.c) + + + + + SCSI mid layer + + + SCSI midlayer implementation + + include/scsi/scsi_device.h + + +!Iinclude/scsi/scsi_device.h + + + + drivers/scsi/scsi.c + Main file for the scsi midlayer. +!Edrivers/scsi/scsi.c + + + drivers/scsi/scsicam.c + + SCSI + Common Access Method support functions, for use with + HDIO_GETGEO, etc. + +!Edrivers/scsi/scsicam.c + + + drivers/scsi/scsi_error.c + Common SCSI error/timeout handling routines. +!Edrivers/scsi/scsi_error.c + + + drivers/scsi/scsi_devinfo.c + + Manage scsi_dev_info_list, which tracks blacklisted and whitelisted + devices. + +!Idrivers/scsi/scsi_devinfo.c + + + drivers/scsi/scsi_ioctl.c + + Handle ioctl() calls for scsi devices. + +!Edrivers/scsi/scsi_ioctl.c + + + drivers/scsi/scsi_lib.c + + SCSI queuing library. + +!Edrivers/scsi/scsi_lib.c + + + drivers/scsi/scsi_lib_dma.c + + SCSI library functions depending on DMA + (map and unmap scatter-gather lists). + +!Edrivers/scsi/scsi_lib_dma.c + + + drivers/scsi/scsi_module.c + + The file drivers/scsi/scsi_module.c contains legacy support for + old-style host templates. It should never be used by any new driver. + + + + drivers/scsi/scsi_proc.c + + The functions in this file provide an interface between + the PROC file system and the SCSI device drivers + It is mainly used for debugging, statistics and to pass + information directly to the lowlevel driver. + + I.E. plumbing to manage /proc/scsi/* + +!Idrivers/scsi/scsi_proc.c + + + drivers/scsi/scsi_netlink.c + + Infrastructure to provide async events from transports to userspace + via netlink, using a single NETLINK_SCSITRANSPORT protocol for all + transports. + + See the + original patch submission for more details. + +!Idrivers/scsi/scsi_netlink.c + + + drivers/scsi/scsi_scan.c + + Scan a host to determine which (if any) devices are attached. + + The general scanning/probing algorithm is as follows, exceptions are + made to it depending on device specific flags, compilation options, + and global variable (boot or module load time) settings. + + A specific LUN is scanned via an INQUIRY command; if the LUN has a + device attached, a scsi_device is allocated and setup for it. + + For every id of every channel on the given host, start by scanning + LUN 0. Skip hosts that don't respond at all to a scan of LUN 0. + Otherwise, if LUN 0 has a device attached, allocate and setup a + scsi_device for it. If target is SCSI-3 or up, issue a REPORT LUN, + and scan all of the LUNs returned by the REPORT LUN; else, + sequentially scan LUNs up until some maximum is reached, or a LUN is + seen that cannot have a device attached to it. + +!Idrivers/scsi/scsi_scan.c + + + drivers/scsi/scsi_sysctl.c + + Set up the sysctl entry: "/dev/scsi/logging_level" + (DEV_SCSI_LOGGING_LEVEL) which sets/returns scsi_logging_level. + + + + drivers/scsi/scsi_sysfs.c + + SCSI sysfs interface routines. + +!Edrivers/scsi/scsi_sysfs.c + + + drivers/scsi/hosts.c + + mid to lowlevel SCSI driver interface + +!Edrivers/scsi/hosts.c + + + drivers/scsi/constants.c + + mid to lowlevel SCSI driver interface + +!Edrivers/scsi/constants.c + + + + + Transport classes + + Transport classes are service libraries for drivers in the scsi + lower layer, which expose transport attributes in sysfs. + + + Fibre Channel transport + + The file drivers/scsi/scsi_transport_fc.c defines transport attributes + for Fibre Channel. + +!Edrivers/scsi/scsi_transport_fc.c + + + iSCSI transport class + + The file drivers/scsi/scsi_transport_iscsi.c defines transport + attributes for the iSCSI class, which sends SCSI packets over TCP/IP + connections. + +!Edrivers/scsi/scsi_transport_iscsi.c + + + Serial Attached SCSI (SAS) transport class + + The file drivers/scsi/scsi_transport_sas.c defines transport + attributes for Serial Attached SCSI, a variant of SATA aimed at + large high-end systems. + + + The SAS transport class contains common code to deal with SAS HBAs, + an aproximated representation of SAS topologies in the driver model, + and various sysfs attributes to expose these topologies and managment + interfaces to userspace. + + + In addition to the basic SCSI core objects this transport class + introduces two additional intermediate objects: The SAS PHY + as represented by struct sas_phy defines an "outgoing" PHY on + a SAS HBA or Expander, and the SAS remote PHY represented by + struct sas_rphy defines an "incoming" PHY on a SAS Expander or + end device. Note that this is purely a software concept, the + underlying hardware for a PHY and a remote PHY is the exactly + the same. + + + There is no concept of a SAS port in this code, users can see + what PHYs form a wide port based on the port_identifier attribute, + which is the same for all PHYs in a port. + +!Edrivers/scsi/scsi_transport_sas.c + + + SATA transport class + + The SATA transport is handled by libata, which has its own book of + documentation in this directory. + + + + Parallel SCSI (SPI) transport class + + The file drivers/scsi/scsi_transport_spi.c defines transport + attributes for traditional (fast/wide/ultra) SCSI busses. + +!Edrivers/scsi/scsi_transport_spi.c + + + SCSI RDMA (SRP) transport class + + The file drivers/scsi/scsi_transport_srp.c defines transport + attributes for SCSI over Remote Direct Memory Access. + +!Edrivers/scsi/scsi_transport_srp.c + + + + + + + SCSI lower layer + + Host Bus Adapter transport types + + Many modern device controllers use the SCSI command set as a protocol to + communicate with their devices through many different types of physical + connections. + + + In SCSI language a bus capable of carrying SCSI commands is + called a "transport", and a controller connecting to such a bus is + called a "host bus adapter" (HBA). + + + Debug transport + + The file drivers/scsi/scsi_debug.c simulates a host adapter with a + variable number of disks (or disk like devices) attached, sharing a + common amount of RAM. Does a lot of checking to make sure that we are + not getting blocks mixed up, and panics the kernel if anything out of + the ordinary is seen. + + + To be more realistic, the simulated devices have the transport + attributes of SAS disks. + + + For documentation see + http://www.torque.net/sg/sdebug26.html + + + + + todo + Parallel (fast/wide/ultra) SCSI, USB, SATA, + SAS, Fibre Channel, FireWire, ATAPI devices, Infiniband, + I20, iSCSI, Parallel ports, netlink... + + + + + diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c index fac4314cd2ad..403a7f2d8f9b 100644 --- a/drivers/scsi/constants.c +++ b/drivers/scsi/constants.c @@ -362,7 +362,6 @@ void scsi_print_command(struct scsi_cmnd *cmd) EXPORT_SYMBOL(scsi_print_command); /** - * * scsi_print_status - print scsi status description * @scsi_status: scsi status value * diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 24271a871b8c..9a10b4335e76 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -54,8 +54,7 @@ static struct class shost_class = { }; /** - * scsi_host_set_state - Take the given host through the host - * state model. + * scsi_host_set_state - Take the given host through the host state model. * @shost: scsi host to change the state of. * @state: state to change to. * @@ -431,7 +430,6 @@ EXPORT_SYMBOL(scsi_unregister); /** * scsi_host_lookup - get a reference to a Scsi_Host by host no - * * @hostnum: host number to locate * * Return value: diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 0fb1709ce5e3..412a351c6cf7 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -122,6 +122,11 @@ static const char *const scsi_device_types[] = { "Automation/Drive ", }; +/** + * scsi_device_type - Return 17 char string indicating device type. + * @type: type number to look up + */ + const char * scsi_device_type(unsigned type) { if (type == 0x1e) @@ -156,6 +161,14 @@ static struct scsi_host_cmd_pool scsi_cmd_dma_pool = { static DEFINE_MUTEX(host_cmd_pool_mutex); +/** + * __scsi_get_command - Allocate a struct scsi_cmnd + * @shost: host to transmit command + * @gfp_mask: allocation mask + * + * Description: allocate a struct scsi_cmd from host's slab, recycling from the + * host's free_list if necessary. + */ struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask) { struct scsi_cmnd *cmd; @@ -179,13 +192,10 @@ struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask) } EXPORT_SYMBOL_GPL(__scsi_get_command); -/* - * Function: scsi_get_command() - * - * Purpose: Allocate and setup a scsi command block - * - * Arguments: dev - parent scsi device - * gfp_mask- allocator flags +/** + * scsi_get_command - Allocate and setup a scsi command block + * @dev: parent scsi device + * @gfp_mask: allocator flags * * Returns: The allocated scsi command structure. */ @@ -217,6 +227,12 @@ struct scsi_cmnd *scsi_get_command(struct scsi_device *dev, gfp_t gfp_mask) } EXPORT_SYMBOL(scsi_get_command); +/** + * __scsi_put_command - Free a struct scsi_cmnd + * @shost: dev->host + * @cmd: Command to free + * @dev: parent scsi device + */ void __scsi_put_command(struct Scsi_Host *shost, struct scsi_cmnd *cmd, struct device *dev) { @@ -237,12 +253,9 @@ void __scsi_put_command(struct Scsi_Host *shost, struct scsi_cmnd *cmd, } EXPORT_SYMBOL(__scsi_put_command); -/* - * Function: scsi_put_command() - * - * Purpose: Free a scsi command block - * - * Arguments: cmd - command block to free +/** + * scsi_put_command - Free a scsi command block + * @cmd: command block to free * * Returns: Nothing. * @@ -263,12 +276,13 @@ void scsi_put_command(struct scsi_cmnd *cmd) } EXPORT_SYMBOL(scsi_put_command); -/* - * Function: scsi_setup_command_freelist() - * - * Purpose: Setup the command freelist for a scsi host. +/** + * scsi_setup_command_freelist - Setup the command freelist for a scsi host. + * @shost: host to allocate the freelist for. * - * Arguments: shost - host to allocate the freelist for. + * Description: The command freelist protects against system-wide out of memory + * deadlock by preallocating one SCSI command structure for each host, so the + * system can always write to a swap file on a device associated with that host. * * Returns: Nothing. */ @@ -282,7 +296,7 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost) /* * Select a command slab for this host and create it if not - * yet existant. + * yet existent. */ mutex_lock(&host_cmd_pool_mutex); pool = (shost->unchecked_isa_dma ? &scsi_cmd_dma_pool : &scsi_cmd_pool); @@ -318,12 +332,9 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost) } -/* - * Function: scsi_destroy_command_freelist() - * - * Purpose: Release the command freelist for a scsi host. - * - * Arguments: shost - host that's freelist is going to be destroyed +/** + * scsi_destroy_command_freelist - Release the command freelist for a scsi host. + * @shost: host whose freelist is going to be destroyed */ void scsi_destroy_command_freelist(struct Scsi_Host *shost) { @@ -441,8 +452,12 @@ void scsi_log_completion(struct scsi_cmnd *cmd, int disposition) } #endif -/* - * Assign a serial number to the request for error recovery +/** + * scsi_cmd_get_serial - Assign a serial number to a command + * @host: the scsi host + * @cmd: command to assign serial number to + * + * Description: a serial number identifies a request for error recovery * and debugging purposes. Protected by the Host_Lock of host. */ static inline void scsi_cmd_get_serial(struct Scsi_Host *host, struct scsi_cmnd *cmd) @@ -452,14 +467,12 @@ static inline void scsi_cmd_get_serial(struct Scsi_Host *host, struct scsi_cmnd cmd->serial_number = host->cmd_serial_number++; } -/* - * Function: scsi_dispatch_command - * - * Purpose: Dispatch a command to the low-level driver. - * - * Arguments: cmd - command block we are dispatching. +/** + * scsi_dispatch_command - Dispatch a command to the low-level driver. + * @cmd: command block we are dispatching. * - * Notes: + * Return: nonzero return request was rejected and device's queue needs to be + * plugged. */ int scsi_dispatch_cmd(struct scsi_cmnd *cmd) { @@ -585,7 +598,7 @@ int scsi_dispatch_cmd(struct scsi_cmnd *cmd) /** * scsi_req_abort_cmd -- Request command recovery for the specified command - * cmd: pointer to the SCSI command of interest + * @cmd: pointer to the SCSI command of interest * * This function requests that SCSI Core start recovery for the * command by deleting the timer and adding the command to the eh @@ -606,9 +619,9 @@ EXPORT_SYMBOL(scsi_req_abort_cmd); * @cmd: The SCSI Command for which a low-level device driver (LLDD) gives * ownership back to SCSI Core -- i.e. the LLDD has finished with it. * - * This function is the mid-level's (SCSI Core) interrupt routine, which - * regains ownership of the SCSI command (de facto) from a LLDD, and enqueues - * the command to the done queue for further processing. + * Description: This function is the mid-level's (SCSI Core) interrupt routine, + * which regains ownership of the SCSI command (de facto) from a LLDD, and + * enqueues the command to the done queue for further processing. * * This is the producer of the done queue who enqueues at the tail. * @@ -617,7 +630,7 @@ EXPORT_SYMBOL(scsi_req_abort_cmd); static void scsi_done(struct scsi_cmnd *cmd) { /* - * We don't have to worry about this one timing out any more. + * We don't have to worry about this one timing out anymore. * If we are unable to remove the timer, then the command * has already timed out. In which case, we have no choice but to * let the timeout function run, as we have no idea where in fact @@ -660,10 +673,11 @@ static struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd) return *(struct scsi_driver **)cmd->request->rq_disk->private_data; } -/* - * Function: scsi_finish_command +/** + * scsi_finish_command - cleanup and pass command back to upper layer + * @cmd: the command * - * Purpose: Pass command off to upper layer for finishing of I/O + * Description: Pass command off to upper layer for finishing of I/O * request, waking processes that are waiting on results, * etc. */ @@ -708,18 +722,14 @@ void scsi_finish_command(struct scsi_cmnd *cmd) } EXPORT_SYMBOL(scsi_finish_command); -/* - * Function: scsi_adjust_queue_depth() - * - * Purpose: Allow low level drivers to tell us to change the queue depth - * on a specific SCSI device - * - * Arguments: sdev - SCSI Device in question - * tagged - Do we use tagged queueing (non-0) or do we treat - * this device as an untagged device (0) - * tags - Number of tags allowed if tagged queueing enabled, - * or number of commands the low level driver can - * queue up in non-tagged mode (as per cmd_per_lun). +/** + * scsi_adjust_queue_depth - Let low level drivers change a device's queue depth + * @sdev: SCSI Device in question + * @tagged: Do we use tagged queueing (non-0) or do we treat + * this device as an untagged device (0) + * @tags: Number of tags allowed if tagged queueing enabled, + * or number of commands the low level driver can + * queue up in non-tagged mode (as per cmd_per_lun). * * Returns: Nothing * @@ -742,8 +752,8 @@ void scsi_adjust_queue_depth(struct scsi_device *sdev, int tagged, int tags) spin_lock_irqsave(sdev->request_queue->queue_lock, flags); - /* Check to see if the queue is managed by the block layer - * if it is, and we fail to adjust the depth, exit */ + /* Check to see if the queue is managed by the block layer. + * If it is, and we fail to adjust the depth, exit. */ if (blk_queue_tagged(sdev->request_queue) && blk_queue_resize_tags(sdev->request_queue, tags) != 0) goto out; @@ -772,20 +782,17 @@ void scsi_adjust_queue_depth(struct scsi_device *sdev, int tagged, int tags) } EXPORT_SYMBOL(scsi_adjust_queue_depth); -/* - * Function: scsi_track_queue_full() +/** + * scsi_track_queue_full - track QUEUE_FULL events to adjust queue depth + * @sdev: SCSI Device in question + * @depth: Current number of outstanding SCSI commands on this device, + * not counting the one returned as QUEUE_FULL. * - * Purpose: This function will track successive QUEUE_FULL events on a + * Description: This function will track successive QUEUE_FULL events on a * specific SCSI device to determine if and when there is a * need to adjust the queue depth on the device. * - * Arguments: sdev - SCSI Device in question - * depth - Current number of outstanding SCSI commands on - * this device, not counting the one returned as - * QUEUE_FULL. - * - * Returns: 0 - No change needed - * >0 - Adjust queue depth to this new depth + * Returns: 0 - No change needed, >0 - Adjust queue depth to this new depth, * -1 - Drop back to untagged operation using host->cmd_per_lun * as the untagged command depth * @@ -824,10 +831,10 @@ int scsi_track_queue_full(struct scsi_device *sdev, int depth) EXPORT_SYMBOL(scsi_track_queue_full); /** - * scsi_device_get - get an addition reference to a scsi_device + * scsi_device_get - get an additional reference to a scsi_device * @sdev: device to get a reference to * - * Gets a reference to the scsi_device and increments the use count + * Description: Gets a reference to the scsi_device and increments the use count * of the underlying LLDD module. You must hold host_lock of the * parent Scsi_Host or already have a reference when calling this. */ @@ -849,8 +856,8 @@ EXPORT_SYMBOL(scsi_device_get); * scsi_device_put - release a reference to a scsi_device * @sdev: device to release a reference on. * - * Release a reference to the scsi_device and decrements the use count - * of the underlying LLDD module. The device is freed once the last + * Description: Release a reference to the scsi_device and decrements the use + * count of the underlying LLDD module. The device is freed once the last * user vanishes. */ void scsi_device_put(struct scsi_device *sdev) @@ -867,7 +874,7 @@ void scsi_device_put(struct scsi_device *sdev) } EXPORT_SYMBOL(scsi_device_put); -/* helper for shost_for_each_device, thus not documented */ +/* helper for shost_for_each_device, see that for documentation */ struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *shost, struct scsi_device *prev) { @@ -895,6 +902,8 @@ EXPORT_SYMBOL(__scsi_iterate_devices); /** * starget_for_each_device - helper to walk all devices of a target * @starget: target whose devices we want to iterate over. + * @data: Opaque passed to each function call. + * @fn: Function to call on each device * * This traverses over each device of @starget. The devices have * a reference that must be released by scsi_host_put when breaking @@ -946,13 +955,13 @@ EXPORT_SYMBOL(__starget_for_each_device); * @starget: SCSI target pointer * @lun: SCSI Logical Unit Number * - * Looks up the scsi_device with the specified @lun for a give - * @starget. The returned scsi_device does not have an additional + * Description: Looks up the scsi_device with the specified @lun for a given + * @starget. The returned scsi_device does not have an additional * reference. You must hold the host's host_lock over this call and * any access to the returned scsi_device. * * Note: The only reason why drivers would want to use this is because - * they're need to access the device list in irq context. Otherwise you + * they need to access the device list in irq context. Otherwise you * really want to use scsi_device_lookup_by_target instead. **/ struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *starget, @@ -974,9 +983,9 @@ EXPORT_SYMBOL(__scsi_device_lookup_by_target); * @starget: SCSI target pointer * @lun: SCSI Logical Unit Number * - * Looks up the scsi_device with the specified @channel, @id, @lun for a - * give host. The returned scsi_device has an additional reference that - * needs to be release with scsi_host_put once you're done with it. + * Description: Looks up the scsi_device with the specified @channel, @id, @lun + * for a given host. The returned scsi_device has an additional reference that + * needs to be released with scsi_device_put once you're done with it. **/ struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *starget, uint lun) @@ -996,19 +1005,19 @@ struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *starget, EXPORT_SYMBOL(scsi_device_lookup_by_target); /** - * scsi_device_lookup - find a device given the host (UNLOCKED) + * __scsi_device_lookup - find a device given the host (UNLOCKED) * @shost: SCSI host pointer * @channel: SCSI channel (zero if only one channel) - * @pun: SCSI target number (physical unit number) + * @id: SCSI target number (physical unit number) * @lun: SCSI Logical Unit Number * - * Looks up the scsi_device with the specified @channel, @id, @lun for a - * give host. The returned scsi_device does not have an additional reference. - * You must hold the host's host_lock over this call and any access to the - * returned scsi_device. + * Description: Looks up the scsi_device with the specified @channel, @id, @lun + * for a given host. The returned scsi_device does not have an additional + * reference. You must hold the host's host_lock over this call and any access + * to the returned scsi_device. * * Note: The only reason why drivers would want to use this is because - * they're need to access the device list in irq context. Otherwise you + * they need to access the device list in irq context. Otherwise you * really want to use scsi_device_lookup instead. **/ struct scsi_device *__scsi_device_lookup(struct Scsi_Host *shost, @@ -1033,9 +1042,9 @@ EXPORT_SYMBOL(__scsi_device_lookup); * @id: SCSI target number (physical unit number) * @lun: SCSI Logical Unit Number * - * Looks up the scsi_device with the specified @channel, @id, @lun for a - * give host. The returned scsi_device has an additional reference that - * needs to be release with scsi_host_put once you're done with it. + * Description: Looks up the scsi_device with the specified @channel, @id, @lun + * for a given host. The returned scsi_device has an additional reference that + * needs to be released with scsi_device_put once you're done with it. **/ struct scsi_device *scsi_device_lookup(struct Scsi_Host *shost, uint channel, uint id, uint lun) diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index 348cc5a6e3cd..6839c1004b29 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -276,11 +276,12 @@ static void scsi_strcpy_devinfo(char *name, char *to, size_t to_length, } /** - * scsi_dev_info_list_add: add one dev_info list entry. + * scsi_dev_info_list_add - add one dev_info list entry. + * @compatible: if true, null terminate short strings. Otherwise space pad. * @vendor: vendor string * @model: model (product) string * @strflags: integer string - * @flag: if strflags NULL, use this flag value + * @flags: if strflags NULL, use this flag value * * Description: * Create and add one dev_info entry for @vendor, @model, @strflags or @@ -322,8 +323,7 @@ static int scsi_dev_info_list_add(int compatible, char *vendor, char *model, } /** - * scsi_dev_info_list_add_str: parse dev_list and add to the - * scsi_dev_info_list. + * scsi_dev_info_list_add_str - parse dev_list and add to the scsi_dev_info_list. * @dev_list: string of device flags to add * * Description: @@ -374,15 +374,15 @@ static int scsi_dev_info_list_add_str(char *dev_list) } /** - * get_device_flags - get device specific flags from the dynamic device - * list. Called during scan time. + * get_device_flags - get device specific flags from the dynamic device list. + * @sdev: &scsi_device to get flags for * @vendor: vendor name * @model: model name * * Description: * Search the scsi_dev_info_list for an entry matching @vendor and * @model, if found, return the matching flags value, else return - * the host or global default settings. + * the host or global default settings. Called during scan time. **/ int scsi_get_device_flags(struct scsi_device *sdev, const unsigned char *vendor, @@ -483,13 +483,11 @@ stop_output: } /* - * proc_scsi_dev_info_write: allow additions to the scsi_dev_info_list via - * /proc. + * proc_scsi_dev_info_write - allow additions to scsi_dev_info_list via /proc. * - * Use: echo "vendor:model:flag" > /proc/scsi/device_info - * - * To add a black/white list entry for vendor and model with an integer - * value of flag to the scsi device info list. + * Description: Adds a black/white list entry for vendor and model with an + * integer value of flag to the scsi device info list. + * To use, echo "vendor:model:flag" > /proc/scsi/device_info */ static int proc_scsi_devinfo_write(struct file *file, const char __user *buf, unsigned long length, void *data) @@ -532,8 +530,7 @@ MODULE_PARM_DESC(default_dev_flags, "scsi default device flag integer value"); /** - * scsi_dev_info_list_delete: called from scsi.c:exit_scsi to remove - * the scsi_dev_info_list. + * scsi_dev_info_list_delete - called from scsi.c:exit_scsi to remove the scsi_dev_info_list. **/ void scsi_exit_devinfo(void) { @@ -552,13 +549,12 @@ void scsi_exit_devinfo(void) } /** - * scsi_dev_list_init: set up the dynamic device list. - * @dev_list: string of device flags to add + * scsi_dev_list_init - set up the dynamic device list. * * Description: - * Add command line @dev_list entries, then add + * Add command line entries from scsi_dev_flags, then add * scsi_static_device_list entries to the scsi device info list. - **/ + */ int __init scsi_init_devinfo(void) { #ifdef CONFIG_SCSI_PROC_FS diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index ebaca4ca4a13..22f8140598ba 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -779,7 +779,7 @@ static int scsi_request_sense(struct scsi_cmnd *scmd) * Notes: * We don't want to use the normal command completion while we are are * still handling errors - it may cause other commands to be queued, - * and that would disturb what we are doing. thus we really want to + * and that would disturb what we are doing. Thus we really want to * keep a list of pending commands for final completion, and once we * are ready to leave error handling we handle completion for real. **/ @@ -794,7 +794,7 @@ EXPORT_SYMBOL(scsi_eh_finish_cmd); /** * scsi_eh_get_sense - Get device sense data. * @work_q: Queue of commands to process. - * @done_q: Queue of proccessed commands.. + * @done_q: Queue of processed commands. * * Description: * See if we need to request sense information. if so, then get it @@ -802,7 +802,7 @@ EXPORT_SYMBOL(scsi_eh_finish_cmd); * * Notes: * This has the unfortunate side effect that if a shost adapter does - * not automatically request sense information, that we end up shutting + * not automatically request sense information, we end up shutting * it down before we request it. * * All drivers should request sense information internally these days, @@ -858,7 +858,7 @@ EXPORT_SYMBOL_GPL(scsi_eh_get_sense); /** * scsi_eh_tur - Send TUR to device. - * @scmd: Scsi cmd to send TUR + * @scmd: &scsi_cmnd to send TUR * * Return value: * 0 - Device is ready. 1 - Device NOT ready. @@ -887,14 +887,14 @@ retry_tur: } /** - * scsi_eh_abort_cmds - abort canceled commands. - * @shost: scsi host being recovered. - * @eh_done_q: list_head for processed commands. + * scsi_eh_abort_cmds - abort pending commands. + * @work_q: &list_head for pending commands. + * @done_q: &list_head for processed commands. * * Decription: * Try and see whether or not it makes sense to try and abort the - * running command. this only works out to be the case if we have one - * command that has timed out. if the command simply failed, it makes + * running command. This only works out to be the case if we have one + * command that has timed out. If the command simply failed, it makes * no sense to try and abort the command, since as far as the shost * adapter is concerned, it isn't running. **/ @@ -931,7 +931,7 @@ static int scsi_eh_abort_cmds(struct list_head *work_q, /** * scsi_eh_try_stu - Send START_UNIT to device. - * @scmd: Scsi cmd to send START_UNIT + * @scmd: &scsi_cmnd to send START_UNIT * * Return value: * 0 - Device is ready. 1 - Device NOT ready. @@ -956,8 +956,9 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd) /** * scsi_eh_stu - send START_UNIT if needed - * @shost: scsi host being recovered. - * @eh_done_q: list_head for processed commands. + * @shost: &scsi host being recovered. + * @work_q: &list_head for pending commands. + * @done_q: &list_head for processed commands. * * Notes: * If commands are failing due to not ready, initializing command required, @@ -1008,10 +1009,11 @@ static int scsi_eh_stu(struct Scsi_Host *shost, /** * scsi_eh_bus_device_reset - send bdr if needed * @shost: scsi host being recovered. - * @eh_done_q: list_head for processed commands. + * @work_q: &list_head for pending commands. + * @done_q: &list_head for processed commands. * * Notes: - * Try a bus device reset. still, look to see whether we have multiple + * Try a bus device reset. Still, look to see whether we have multiple * devices that are jammed or not - if we have multiple devices, it * makes no sense to try bus_device_reset - we really would need to try * a bus_reset instead. @@ -1063,8 +1065,9 @@ static int scsi_eh_bus_device_reset(struct Scsi_Host *shost, /** * scsi_eh_bus_reset - send a bus reset - * @shost: scsi host being recovered. - * @eh_done_q: list_head for processed commands. + * @shost: &scsi host being recovered. + * @work_q: &list_head for pending commands. + * @done_q: &list_head for processed commands. **/ static int scsi_eh_bus_reset(struct Scsi_Host *shost, struct list_head *work_q, @@ -1440,7 +1443,8 @@ static void scsi_restart_operations(struct Scsi_Host *shost) /** * scsi_eh_ready_devs - check device ready state and recover if not. * @shost: host to be recovered. - * @eh_done_q: list_head for processed commands. + * @work_q: &list_head for pending commands. + * @done_q: &list_head for processed commands. * **/ void scsi_eh_ready_devs(struct Scsi_Host *shost, @@ -1824,9 +1828,7 @@ int scsi_command_normalize_sense(struct scsi_cmnd *cmd, EXPORT_SYMBOL(scsi_command_normalize_sense); /** - * scsi_sense_desc_find - search for a given descriptor type in - * descriptor sense data format. - * + * scsi_sense_desc_find - search for a given descriptor type in descriptor sense data format. * @sense_buffer: byte array of descriptor format sense data * @sb_len: number of valid bytes in sense_buffer * @desc_type: value of descriptor type to find @@ -1865,9 +1867,7 @@ const u8 * scsi_sense_desc_find(const u8 * sense_buffer, int sb_len, EXPORT_SYMBOL(scsi_sense_desc_find); /** - * scsi_get_sense_info_fld - attempts to get information field from - * sense data (either fixed or descriptor format) - * + * scsi_get_sense_info_fld - get information field from sense data (either fixed or descriptor format) * @sense_buffer: byte array of sense data * @sb_len: number of valid bytes in sense_buffer * @info_out: pointer to 64 integer where 8 or 4 byte information diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c index 32293f451669..83e144716901 100644 --- a/drivers/scsi/scsi_ioctl.c +++ b/drivers/scsi/scsi_ioctl.c @@ -174,10 +174,15 @@ static int scsi_ioctl_get_pci(struct scsi_device *sdev, void __user *arg) } -/* - * the scsi_ioctl() function differs from most ioctls in that it does - * not take a major/minor number as the dev field. Rather, it takes - * a pointer to a scsi_devices[] element, a structure. +/** + * scsi_ioctl - Dispatch ioctl to scsi device + * @sdev: scsi device receiving ioctl + * @cmd: which ioctl is it + * @arg: data associated with ioctl + * + * Description: The scsi_ioctl() function differs from most ioctls in that it + * does not take a major/minor number as the dev field. Rather, it takes + * a pointer to a &struct scsi_device. */ int scsi_ioctl(struct scsi_device *sdev, int cmd, void __user *arg) { @@ -264,9 +269,12 @@ int scsi_ioctl(struct scsi_device *sdev, int cmd, void __user *arg) } EXPORT_SYMBOL(scsi_ioctl); -/* - * the scsi_nonblock_ioctl() function is designed for ioctls which may - * be executed even if the device is in recovery. +/** + * scsi_nonblock_ioctl() - Handle SG_SCSI_RESET + * @sdev: scsi device receiving ioctl + * @cmd: Must be SC_SCSI_RESET + * @arg: pointer to int containing SG_SCSI_RESET_{DEVICE,BUS,HOST} + * @filp: either NULL or a &struct file which must have the O_NONBLOCK flag. */ int scsi_nonblockable_ioctl(struct scsi_device *sdev, int cmd, void __user *arg, struct file *filp) @@ -276,7 +284,7 @@ int scsi_nonblockable_ioctl(struct scsi_device *sdev, int cmd, /* The first set of iocts may be executed even if we're doing * error processing, as long as the device was opened * non-blocking */ - if (filp && filp->f_flags & O_NONBLOCK) { + if (filp && (filp->f_flags & O_NONBLOCK)) { if (scsi_host_in_recovery(sdev->host)) return -ENODEV; } else if (!scsi_block_when_processing_errors(sdev)) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index a9ac5b1b1667..199b02452259 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -175,7 +175,7 @@ int scsi_queue_insert(struct scsi_cmnd *cmd, int reason) * * returns the req->errors value which is the scsi_cmnd result * field. - **/ + */ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, int data_direction, void *buffer, unsigned bufflen, unsigned char *sense, int timeout, int retries, int flags) @@ -274,7 +274,7 @@ static void scsi_bi_endio(struct bio *bio, int error) /** * scsi_req_map_sg - map a scatterlist into a request * @rq: request to fill - * @sg: scatterlist + * @sgl: scatterlist * @nsegs: number of elements * @bufflen: len of buffer * @gfp: memory allocation flags @@ -365,14 +365,16 @@ free_bios: * @sdev: scsi device * @cmd: scsi command * @cmd_len: length of scsi cdb - * @data_direction: data direction + * @data_direction: DMA_TO_DEVICE, DMA_FROM_DEVICE, or DMA_NONE * @buffer: data buffer (this can be a kernel buffer or scatterlist) * @bufflen: len of buffer * @use_sg: if buffer is a scatterlist this is the number of elements * @timeout: request timeout in seconds * @retries: number of times to retry request - * @flags: or into request flags - **/ + * @privdata: data passed to done() + * @done: callback function when done + * @gfp: memory allocation flags + */ int scsi_execute_async(struct scsi_device *sdev, const unsigned char *cmd, int cmd_len, int data_direction, void *buffer, unsigned bufflen, int use_sg, int timeout, int retries, void *privdata, @@ -1804,7 +1806,7 @@ void scsi_exit_queue(void) * @timeout: command timeout * @retries: number of retries before failing * @data: returns a structure abstracting the mode header data - * @sense: place to put sense data (or NULL if no sense to be collected). + * @sshdr: place to put sense data (or NULL if no sense to be collected). * must be SCSI_SENSE_BUFFERSIZE big. * * Returns zero if successful; negative error number or scsi @@ -1871,8 +1873,7 @@ scsi_mode_select(struct scsi_device *sdev, int pf, int sp, int modepage, EXPORT_SYMBOL_GPL(scsi_mode_select); /** - * scsi_mode_sense - issue a mode sense, falling back from 10 to - * six bytes if necessary. + * scsi_mode_sense - issue a mode sense, falling back from 10 to six bytes if necessary. * @sdev: SCSI device to be queried * @dbd: set if mode sense will allow block descriptors to be returned * @modepage: mode page being requested @@ -1881,13 +1882,13 @@ EXPORT_SYMBOL_GPL(scsi_mode_select); * @timeout: command timeout * @retries: number of retries before failing * @data: returns a structure abstracting the mode header data - * @sense: place to put sense data (or NULL if no sense to be collected). + * @sshdr: place to put sense data (or NULL if no sense to be collected). * must be SCSI_SENSE_BUFFERSIZE big. * * Returns zero if unsuccessful, or the header offset (either 4 * or 8 depending on whether a six or ten byte command was * issued) if successful. - **/ + */ int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage, unsigned char *buffer, int len, int timeout, int retries, @@ -2007,14 +2008,13 @@ scsi_test_unit_ready(struct scsi_device *sdev, int timeout, int retries) EXPORT_SYMBOL(scsi_test_unit_ready); /** - * scsi_device_set_state - Take the given device through the device - * state model. + * scsi_device_set_state - Take the given device through the device state model. * @sdev: scsi device to change the state of. * @state: state to change to. * * Returns zero if unsuccessful or an error if the requested * transition is illegal. - **/ + */ int scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state) { @@ -2264,7 +2264,7 @@ EXPORT_SYMBOL_GPL(sdev_evt_send_simple); * Must be called with user context, may sleep. * * Returns zero if unsuccessful or an error if not. - **/ + */ int scsi_device_quiesce(struct scsi_device *sdev) { @@ -2289,7 +2289,7 @@ EXPORT_SYMBOL(scsi_device_quiesce); * queues. * * Must be called with user context, may sleep. - **/ + */ void scsi_device_resume(struct scsi_device *sdev) { @@ -2326,8 +2326,7 @@ scsi_target_resume(struct scsi_target *starget) EXPORT_SYMBOL(scsi_target_resume); /** - * scsi_internal_device_block - internal function to put a device - * temporarily into the SDEV_BLOCK state + * scsi_internal_device_block - internal function to put a device temporarily into the SDEV_BLOCK state * @sdev: device to block * * Block request made by scsi lld's to temporarily stop all @@ -2342,7 +2341,7 @@ EXPORT_SYMBOL(scsi_target_resume); * state, all commands are deferred until the scsi lld reenables * the device with scsi_device_unblock or device_block_tmo fires. * This routine assumes the host_lock is held on entry. - **/ + */ int scsi_internal_device_block(struct scsi_device *sdev) { @@ -2382,7 +2381,7 @@ EXPORT_SYMBOL_GPL(scsi_internal_device_block); * (which must be a legal transition) allowing the midlayer to * goose the queue for this device. This routine assumes the * host_lock is held upon entry. - **/ + */ int scsi_internal_device_unblock(struct scsi_device *sdev) { @@ -2460,7 +2459,7 @@ EXPORT_SYMBOL_GPL(scsi_target_unblock); /** * scsi_kmap_atomic_sg - find and atomically map an sg-elemnt - * @sg: scatter-gather list + * @sgl: scatter-gather list * @sg_count: number of segments in sg * @offset: offset in bytes into sg, on return offset into the mapped area * @len: bytes to map, on return number of bytes mapped @@ -2509,8 +2508,7 @@ void *scsi_kmap_atomic_sg(struct scatterlist *sgl, int sg_count, EXPORT_SYMBOL(scsi_kmap_atomic_sg); /** - * scsi_kunmap_atomic_sg - atomically unmap a virtual address, previously - * mapped with scsi_kmap_atomic_sg + * scsi_kunmap_atomic_sg - atomically unmap a virtual address, previously mapped with scsi_kmap_atomic_sg * @virt: virtual address to be unmapped */ void scsi_kunmap_atomic_sg(void *virt) diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c index 40579edca101..3e1591828171 100644 --- a/drivers/scsi/scsi_netlink.c +++ b/drivers/scsi/scsi_netlink.c @@ -32,11 +32,12 @@ EXPORT_SYMBOL_GPL(scsi_nl_sock); /** - * scsi_nl_rcv_msg - - * Receive message handler. Extracts message from a receive buffer. + * scsi_nl_rcv_msg - Receive message handler. + * @skb: socket receive buffer + * + * Description: Extracts message from a receive buffer. * Validates message header and calls appropriate transport message handler * - * @skb: socket receive buffer * **/ static void @@ -99,9 +100,7 @@ next_msg: /** - * scsi_nl_rcv_event - - * Event handler for a netlink socket. - * + * scsi_nl_rcv_event - Event handler for a netlink socket. * @this: event notifier block * @event: event type * @ptr: event payload @@ -129,9 +128,7 @@ static struct notifier_block scsi_netlink_notifier = { /** - * scsi_netlink_init - - * Called by SCSI subsystem to intialize the SCSI transport netlink - * interface + * scsi_netlink_init - Called by SCSI subsystem to intialize the SCSI transport netlink interface * **/ void @@ -160,9 +157,7 @@ scsi_netlink_init(void) /** - * scsi_netlink_exit - - * Called by SCSI subsystem to disable the SCSI transport netlink - * interface + * scsi_netlink_exit - Called by SCSI subsystem to disable the SCSI transport netlink interface * **/ void diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c index bb6f051beda8..ed395154a5b1 100644 --- a/drivers/scsi/scsi_proc.c +++ b/drivers/scsi/scsi_proc.c @@ -45,6 +45,16 @@ static struct proc_dir_entry *proc_scsi; /* Protect sht->present and sht->proc_dir */ static DEFINE_MUTEX(global_host_template_mutex); +/** + * proc_scsi_read - handle read from /proc by calling host's proc_info() command + * @buffer: passed to proc_info + * @start: passed to proc_info + * @offset: passed to proc_info + * @length: passed to proc_info + * @eof: returns whether length read was less than requested + * @data: pointer to a &struct Scsi_Host + */ + static int proc_scsi_read(char *buffer, char **start, off_t offset, int length, int *eof, void *data) { @@ -57,6 +67,13 @@ static int proc_scsi_read(char *buffer, char **start, off_t offset, return n; } +/** + * proc_scsi_write_proc - Handle write to /proc by calling host's proc_info() + * @file: not used + * @buf: source of data to write. + * @count: number of bytes (at most PROC_BLOCK_SIZE) to write. + * @data: pointer to &struct Scsi_Host + */ static int proc_scsi_write_proc(struct file *file, const char __user *buf, unsigned long count, void *data) { @@ -80,6 +97,13 @@ out: return ret; } +/** + * scsi_proc_hostdir_add - Create directory in /proc for a scsi host + * @sht: owner of this directory + * + * Sets sht->proc_dir to the new directory. + */ + void scsi_proc_hostdir_add(struct scsi_host_template *sht) { if (!sht->proc_info) @@ -97,6 +121,10 @@ void scsi_proc_hostdir_add(struct scsi_host_template *sht) mutex_unlock(&global_host_template_mutex); } +/** + * scsi_proc_hostdir_rm - remove directory in /proc for a scsi host + * @sht: owner of directory + */ void scsi_proc_hostdir_rm(struct scsi_host_template *sht) { if (!sht->proc_info) @@ -110,6 +138,11 @@ void scsi_proc_hostdir_rm(struct scsi_host_template *sht) mutex_unlock(&global_host_template_mutex); } + +/** + * scsi_proc_host_add - Add entry for this host to appropriate /proc dir + * @shost: host to add + */ void scsi_proc_host_add(struct Scsi_Host *shost) { struct scsi_host_template *sht = shost->hostt; @@ -133,6 +166,10 @@ void scsi_proc_host_add(struct Scsi_Host *shost) p->owner = sht->module; } +/** + * scsi_proc_host_rm - remove this host's entry from /proc + * @shost: which host + */ void scsi_proc_host_rm(struct Scsi_Host *shost) { char name[10]; @@ -143,7 +180,14 @@ void scsi_proc_host_rm(struct Scsi_Host *shost) sprintf(name,"%d", shost->host_no); remove_proc_entry(name, shost->hostt->proc_dir); } - +/** + * proc_print_scsidevice - return data about this host + * @dev: A scsi device + * @data: &struct seq_file to output to. + * + * Description: prints Host, Channel, Id, Lun, Vendor, Model, Rev, Type, + * and revision. + */ static int proc_print_scsidevice(struct device *dev, void *data) { struct scsi_device *sdev = to_scsi_device(dev); @@ -189,6 +233,21 @@ static int proc_print_scsidevice(struct device *dev, void *data) return 0; } +/** + * scsi_add_single_device - Respond to user request to probe for/add device + * @host: user-supplied decimal integer + * @channel: user-supplied decimal integer + * @id: user-supplied decimal integer + * @lun: user-supplied decimal integer + * + * Description: called by writing "scsi add-single-device" to /proc/scsi/scsi. + * + * does scsi_host_lookup() and either user_scan() if that transport + * type supports it, or else scsi_scan_host_selected() + * + * Note: this seems to be aimed exclusively at SCSI parallel busses. + */ + static int scsi_add_single_device(uint host, uint channel, uint id, uint lun) { struct Scsi_Host *shost; @@ -206,6 +265,16 @@ static int scsi_add_single_device(uint host, uint channel, uint id, uint lun) return error; } +/** + * scsi_remove_single_device - Respond to user request to remove a device + * @host: user-supplied decimal integer + * @channel: user-supplied decimal integer + * @id: user-supplied decimal integer + * @lun: user-supplied decimal integer + * + * Description: called by writing "scsi remove-single-device" to + * /proc/scsi/scsi. Does a scsi_device_lookup() and scsi_remove_device() + */ static int scsi_remove_single_device(uint host, uint channel, uint id, uint lun) { struct scsi_device *sdev; @@ -226,6 +295,25 @@ static int scsi_remove_single_device(uint host, uint channel, uint id, uint lun) return error; } +/** + * proc_scsi_write - handle writes to /proc/scsi/scsi + * @file: not used + * @buf: buffer to write + * @length: length of buf, at most PAGE_SIZE + * @ppos: not used + * + * Description: this provides a legacy mechanism to add or remove devices by + * Host, Channel, ID, and Lun. To use, + * "echo 'scsi add-single-device 0 1 2 3' > /proc/scsi/scsi" or + * "echo 'scsi remove-single-device 0 1 2 3' > /proc/scsi/scsi" with + * "0 1 2 3" replaced by the Host, Channel, Id, and Lun. + * + * Note: this seems to be aimed at parallel SCSI. Most modern busses (USB, + * SATA, Firewire, Fibre Channel, etc) dynamically assign these values to + * provide a unique identifier and nothing more. + */ + + static ssize_t proc_scsi_write(struct file *file, const char __user *buf, size_t length, loff_t *ppos) { @@ -291,6 +379,11 @@ static ssize_t proc_scsi_write(struct file *file, const char __user *buf, return err; } +/** + * proc_scsi_show - show contents of /proc/scsi/scsi (attached devices) + * @s: output goes here + * @p: not used + */ static int proc_scsi_show(struct seq_file *s, void *p) { seq_printf(s, "Attached devices:\n"); @@ -298,10 +391,17 @@ static int proc_scsi_show(struct seq_file *s, void *p) return 0; } +/** + * proc_scsi_open - glue function + * @inode: not used + * @file: passed to single_open() + * + * Associates proc_scsi_show with this file + */ static int proc_scsi_open(struct inode *inode, struct file *file) { /* - * We don't really needs this for the write case but it doesn't + * We don't really need this for the write case but it doesn't * harm either. */ return single_open(file, proc_scsi_show, NULL); @@ -315,6 +415,9 @@ static const struct file_operations proc_scsi_operations = { .release = single_release, }; +/** + * scsi_init_procfs - create scsi and scsi/scsi in procfs + */ int __init scsi_init_procfs(void) { struct proc_dir_entry *pde; @@ -336,6 +439,9 @@ err1: return -ENOMEM; } +/** + * scsi_exit_procfs - Remove scsi/scsi and scsi from procfs + */ void scsi_exit_procfs(void) { remove_proc_entry("scsi/scsi", NULL); diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 40ea71cd2ca6..7e8b2045ccfa 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -221,6 +221,9 @@ static void scsi_unlock_floptical(struct scsi_device *sdev, /** * scsi_alloc_sdev - allocate and setup a scsi_Device + * @starget: which target to allocate a &scsi_device for + * @lun: which lun + * @hostdata: usually NULL and set by ->slave_alloc instead * * Description: * Allocate, initialize for io, and return a pointer to a scsi_Device. @@ -472,7 +475,6 @@ static void scsi_target_reap_usercontext(struct work_struct *work) /** * scsi_target_reap - check to see if target is in use and destroy if not - * * @starget: target to be checked * * This is used after removing a LUN or doing a last put of the target @@ -928,8 +930,7 @@ static inline void scsi_destroy_sdev(struct scsi_device *sdev) #ifdef CONFIG_SCSI_LOGGING /** - * scsi_inq_str - print INQUIRY data from min to max index, - * strip trailing whitespace + * scsi_inq_str - print INQUIRY data from min to max index, strip trailing whitespace * @buf: Output buffer with at least end-first+1 bytes of space * @inq: Inquiry buffer (input) * @first: Offset of string into inq @@ -957,9 +958,10 @@ static unsigned char *scsi_inq_str(unsigned char *buf, unsigned char *inq, * scsi_probe_and_add_lun - probe a LUN, if a LUN is found add it * @starget: pointer to target device structure * @lun: LUN of target device - * @sdevscan: probe the LUN corresponding to this scsi_device - * @sdevnew: store the value of any new scsi_device allocated * @bflagsp: store bflags here if not NULL + * @sdevp: probe the LUN corresponding to this scsi_device + * @rescan: if nonzero skip some code only needed on first scan + * @hostdata: passed to scsi_alloc_sdev() * * Description: * Call scsi_probe_lun, if a LUN with an attached device is found, @@ -1110,6 +1112,8 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, * scsi_sequential_lun_scan - sequentially scan a SCSI target * @starget: pointer to target structure to scan * @bflags: black/white list flag for LUN 0 + * @scsi_level: Which version of the standard does this device adhere to + * @rescan: passed to scsi_probe_add_lun() * * Description: * Generally, scan from LUN 1 (LUN 0 is assumed to already have been @@ -1220,7 +1224,7 @@ EXPORT_SYMBOL(scsilun_to_int); /** * int_to_scsilun: reverts an int into a scsi_lun - * @int: integer to be reverted + * @lun: integer to be reverted * @scsilun: struct scsi_lun to be set. * * Description: @@ -1252,18 +1256,22 @@ EXPORT_SYMBOL(int_to_scsilun); /** * scsi_report_lun_scan - Scan using SCSI REPORT LUN results - * @sdevscan: scan the host, channel, and id of this scsi_device + * @starget: which target + * @bflags: Zero or a mix of BLIST_NOLUN, BLIST_REPORTLUN2, or BLIST_NOREPORTLUN + * @rescan: nonzero if we can skip code only needed on first scan * * Description: - * If @sdevscan is for a SCSI-3 or up device, send a REPORT LUN - * command, and scan the resulting list of LUNs by calling - * scsi_probe_and_add_lun. + * Fast scanning for modern (SCSI-3) devices by sending a REPORT LUN command. + * Scan the resulting list of LUNs by calling scsi_probe_and_add_lun. * - * Modifies sdevscan->lun. + * If BLINK_REPORTLUN2 is set, scan a target that supports more than 8 + * LUNs even if it's older than SCSI-3. + * If BLIST_NOREPORTLUN is set, return 1 always. + * If BLIST_NOLUN is set, return 0 always. * * Return: * 0: scan completed (or no memory, so further scanning is futile) - * 1: no report lun scan, or not configured + * 1: could not scan with REPORT LUN **/ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags, int rescan) diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 7a7cfe583b2a..b1119da6e88c 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -481,9 +481,9 @@ MODULE_PARM_DESC(dev_loss_tmo, " exceeded, the scsi target is removed. Value should be" " between 1 and SCSI_DEVICE_BLOCK_MAX_TIMEOUT."); -/** +/* * Netlink Infrastructure - **/ + */ static atomic_t fc_event_seq; @@ -491,10 +491,10 @@ static atomic_t fc_event_seq; * fc_get_event_number - Obtain the next sequential FC event number * * Notes: - * We could have inline'd this, but it would have required fc_event_seq to + * We could have inlined this, but it would have required fc_event_seq to * be exposed. For now, live with the subroutine call. * Atomic used to avoid lock/unlock... - **/ + */ u32 fc_get_event_number(void) { @@ -505,7 +505,6 @@ EXPORT_SYMBOL(fc_get_event_number); /** * fc_host_post_event - called to post an even on an fc_host. - * * @shost: host the event occurred on * @event_number: fc event number obtained from get_fc_event_number() * @event_code: fc_host event being posted @@ -513,7 +512,7 @@ EXPORT_SYMBOL(fc_get_event_number); * * Notes: * This routine assumes no locks are held on entry. - **/ + */ void fc_host_post_event(struct Scsi_Host *shost, u32 event_number, enum fc_host_event_code event_code, u32 event_data) @@ -579,17 +578,16 @@ EXPORT_SYMBOL(fc_host_post_event); /** - * fc_host_post_vendor_event - called to post a vendor unique event on - * a fc_host - * + * fc_host_post_vendor_event - called to post a vendor unique event on an fc_host * @shost: host the event occurred on * @event_number: fc event number obtained from get_fc_event_number() * @data_len: amount, in bytes, of vendor unique data * @data_buf: pointer to vendor unique data + * @vendor_id: Vendor id * * Notes: * This routine assumes no locks are held on entry. - **/ + */ void fc_host_post_vendor_event(struct Scsi_Host *shost, u32 event_number, u32 data_len, char * data_buf, u64 vendor_id) @@ -1900,7 +1898,6 @@ static int fc_vport_match(struct attribute_container *cont, /** * fc_timed_out - FC Transport I/O timeout intercept handler - * * @scmd: The SCSI command which timed out * * This routine protects against error handlers getting invoked while a @@ -1920,7 +1917,7 @@ static int fc_vport_match(struct attribute_container *cont, * * Notes: * This routine assumes no locks are held on entry. - **/ + */ static enum scsi_eh_timer_return fc_timed_out(struct scsi_cmnd *scmd) { @@ -2133,7 +2130,7 @@ EXPORT_SYMBOL(fc_release_transport); * 1 - work queued for execution * 0 - work is already queued * -EINVAL - work queue doesn't exist - **/ + */ static int fc_queue_work(struct Scsi_Host *shost, struct work_struct *work) { @@ -2152,7 +2149,7 @@ fc_queue_work(struct Scsi_Host *shost, struct work_struct *work) /** * fc_flush_work - Flush a fc_host's workqueue. * @shost: Pointer to Scsi_Host bound to fc_host. - **/ + */ static void fc_flush_work(struct Scsi_Host *shost) { @@ -2175,7 +2172,7 @@ fc_flush_work(struct Scsi_Host *shost) * * Return value: * 1 on success / 0 already queued / < 0 for error - **/ + */ static int fc_queue_devloss_work(struct Scsi_Host *shost, struct delayed_work *work, unsigned long delay) @@ -2195,7 +2192,7 @@ fc_queue_devloss_work(struct Scsi_Host *shost, struct delayed_work *work, /** * fc_flush_devloss - Flush a fc_host's devloss workqueue. * @shost: Pointer to Scsi_Host bound to fc_host. - **/ + */ static void fc_flush_devloss(struct Scsi_Host *shost) { @@ -2212,21 +2209,20 @@ fc_flush_devloss(struct Scsi_Host *shost) /** - * fc_remove_host - called to terminate any fc_transport-related elements - * for a scsi host. - * @rport: remote port to be unblocked. + * fc_remove_host - called to terminate any fc_transport-related elements for a scsi host. + * @shost: Which &Scsi_Host * * This routine is expected to be called immediately preceeding the * a driver's call to scsi_remove_host(). * * WARNING: A driver utilizing the fc_transport, which fails to call - * this routine prior to scsi_remote_host(), will leave dangling + * this routine prior to scsi_remove_host(), will leave dangling * objects in /sys/class/fc_remote_ports. Access to any of these * objects can result in a system crash !!! * * Notes: * This routine assumes no locks are held on entry. - **/ + */ void fc_remove_host(struct Scsi_Host *shost) { @@ -2281,10 +2277,10 @@ EXPORT_SYMBOL(fc_remove_host); /** * fc_starget_delete - called to delete the scsi decendents of an rport - * (target and all sdevs) - * * @work: remote port to be operated on. - **/ + * + * Deletes target and all sdevs. + */ static void fc_starget_delete(struct work_struct *work) { @@ -2303,9 +2299,8 @@ fc_starget_delete(struct work_struct *work) /** * fc_rport_final_delete - finish rport termination and delete it. - * * @work: remote port to be deleted. - **/ + */ static void fc_rport_final_delete(struct work_struct *work) { @@ -2375,7 +2370,7 @@ fc_rport_final_delete(struct work_struct *work) * * Notes: * This routine assumes no locks are held on entry. - **/ + */ static struct fc_rport * fc_rport_create(struct Scsi_Host *shost, int channel, struct fc_rport_identifiers *ids) @@ -2462,8 +2457,7 @@ delete_rport: } /** - * fc_remote_port_add - notifies the fc transport of the existence - * of a remote FC port. + * fc_remote_port_add - notify fc transport of the existence of a remote FC port. * @shost: scsi host the remote port is connected to. * @channel: Channel on shost port connected to. * @ids: The world wide names, fc address, and FC4 port @@ -2499,7 +2493,7 @@ delete_rport: * * Notes: * This routine assumes no locks are held on entry. - **/ + */ struct fc_rport * fc_remote_port_add(struct Scsi_Host *shost, int channel, struct fc_rport_identifiers *ids) @@ -2683,19 +2677,18 @@ EXPORT_SYMBOL(fc_remote_port_add); /** - * fc_remote_port_delete - notifies the fc transport that a remote - * port is no longer in existence. + * fc_remote_port_delete - notifies the fc transport that a remote port is no longer in existence. * @rport: The remote port that no longer exists * * The LLDD calls this routine to notify the transport that a remote * port is no longer part of the topology. Note: Although a port * may no longer be part of the topology, it may persist in the remote * ports displayed by the fc_host. We do this under 2 conditions: - * - If the port was a scsi target, we delay its deletion by "blocking" it. + * 1) If the port was a scsi target, we delay its deletion by "blocking" it. * This allows the port to temporarily disappear, then reappear without * disrupting the SCSI device tree attached to it. During the "blocked" * period the port will still exist. - * - If the port was a scsi target and disappears for longer than we + * 2) If the port was a scsi target and disappears for longer than we * expect, we'll delete the port and the tear down the SCSI device tree * attached to it. However, we want to semi-persist the target id assigned * to that port if it eventually does exist. The port structure will @@ -2709,7 +2702,8 @@ EXPORT_SYMBOL(fc_remote_port_add); * temporary blocked state. From the LLDD's perspective, the rport no * longer exists. From the SCSI midlayer's perspective, the SCSI target * exists, but all sdevs on it are blocked from further I/O. The following - * is then expected: + * is then expected. + * * If the remote port does not return (signaled by a LLDD call to * fc_remote_port_add()) within the dev_loss_tmo timeout, then the * scsi target is removed - killing all outstanding i/o and removing the @@ -2731,7 +2725,7 @@ EXPORT_SYMBOL(fc_remote_port_add); * * Notes: * This routine assumes no locks are held on entry. - **/ + */ void fc_remote_port_delete(struct fc_rport *rport) { @@ -2792,12 +2786,12 @@ fc_remote_port_delete(struct fc_rport *rport) EXPORT_SYMBOL(fc_remote_port_delete); /** - * fc_remote_port_rolechg - notifies the fc transport that the roles - * on a remote may have changed. + * fc_remote_port_rolechg - notifies the fc transport that the roles on a remote may have changed. * @rport: The remote port that changed. + * @roles: New roles for this port. * - * The LLDD calls this routine to notify the transport that the roles - * on a remote port may have changed. The largest effect of this is + * Description: The LLDD calls this routine to notify the transport that the + * roles on a remote port may have changed. The largest effect of this is * if a port now becomes a FCP Target, it must be allocated a * scsi target id. If the port is no longer a FCP target, any * scsi target id value assigned to it will persist in case the @@ -2810,7 +2804,7 @@ EXPORT_SYMBOL(fc_remote_port_delete); * * Notes: * This routine assumes no locks are held on entry. - **/ + */ void fc_remote_port_rolechg(struct fc_rport *rport, u32 roles) { @@ -2875,12 +2869,12 @@ fc_remote_port_rolechg(struct fc_rport *rport, u32 roles) EXPORT_SYMBOL(fc_remote_port_rolechg); /** - * fc_timeout_deleted_rport - Timeout handler for a deleted remote port, - * which we blocked, and has now failed to return - * in the allotted time. - * + * fc_timeout_deleted_rport - Timeout handler for a deleted remote port. * @work: rport target that failed to reappear in the allotted time. - **/ + * + * Description: An attempt to delete a remote port blocks, and if it fails + * to return in the allotted time this gets called. + */ static void fc_timeout_deleted_rport(struct work_struct *work) { @@ -2984,14 +2978,12 @@ fc_timeout_deleted_rport(struct work_struct *work) } /** - * fc_timeout_fail_rport_io - Timeout handler for a fast io failing on a - * disconnected SCSI target. - * + * fc_timeout_fail_rport_io - Timeout handler for a fast io failing on a disconnected SCSI target. * @work: rport to terminate io on. * * Notes: Only requests the failure of the io, not that all are flushed * prior to returning. - **/ + */ static void fc_timeout_fail_rport_io(struct work_struct *work) { @@ -3008,9 +3000,8 @@ fc_timeout_fail_rport_io(struct work_struct *work) /** * fc_scsi_scan_rport - called to perform a scsi scan on a remote port. - * * @work: remote port to be scanned. - **/ + */ static void fc_scsi_scan_rport(struct work_struct *work) { @@ -3047,7 +3038,7 @@ fc_scsi_scan_rport(struct work_struct *work) * * Notes: * This routine assumes no locks are held on entry. - **/ + */ static int fc_vport_create(struct Scsi_Host *shost, int channel, struct device *pdev, struct fc_vport_identifiers *ids, struct fc_vport **ret_vport) @@ -3172,7 +3163,7 @@ delete_vport: * * Notes: * This routine assumes no locks are held on entry. - **/ + */ int fc_vport_terminate(struct fc_vport *vport) { @@ -3232,9 +3223,8 @@ EXPORT_SYMBOL(fc_vport_terminate); /** * fc_vport_sched_delete - workq-based delete request for a vport - * * @work: vport to be deleted. - **/ + */ static void fc_vport_sched_delete(struct work_struct *work) { diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 5428d15f23c6..cb48b80c0865 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -328,9 +328,10 @@ EXPORT_SYMBOL_GPL(iscsi_add_session); * iscsi_create_session - create iscsi class session * @shost: scsi host * @transport: iscsi transport + * @target_id: which target * * This can be called from a LLD or iscsi_transport. - **/ + */ struct iscsi_cls_session * iscsi_create_session(struct Scsi_Host *shost, struct iscsi_transport *transport, @@ -382,7 +383,7 @@ EXPORT_SYMBOL_GPL(iscsi_free_session); * * Can be called by a LLD or iscsi_transport. There must not be * any running connections. - **/ + */ int iscsi_destroy_session(struct iscsi_cls_session *session) { iscsi_remove_session(session); @@ -418,7 +419,7 @@ static int iscsi_is_conn_dev(const struct device *dev) * for software iscsi we could be trying to preallocate a connection struct * in which case there could be two connection structs and cid would be * non-zero. - **/ + */ struct iscsi_cls_conn * iscsi_create_conn(struct iscsi_cls_session *session, uint32_t cid) { @@ -465,10 +466,10 @@ EXPORT_SYMBOL_GPL(iscsi_create_conn); /** * iscsi_destroy_conn - destroy iscsi class connection - * @session: iscsi cls session + * @conn: iscsi cls session * - * This can be called from a LLD or iscsi_transport. - **/ + * This can be called from an LLD or iscsi_transport. + */ int iscsi_destroy_conn(struct iscsi_cls_conn *conn) { transport_unregister_device(&conn->dev); @@ -690,7 +691,7 @@ iscsi_if_get_stats(struct iscsi_transport *transport, struct nlmsghdr *nlh) * * This is called by HW iscsi LLDs to notify userpsace that its HW has * removed a session. - **/ + */ int iscsi_if_destroy_session_done(struct iscsi_cls_conn *conn) { struct iscsi_internal *priv; @@ -751,7 +752,7 @@ EXPORT_SYMBOL_GPL(iscsi_if_destroy_session_done); * * This is called by HW iscsi LLDs to notify userpsace that its HW has * created a session or a existing session is back in the logged in state. - **/ + */ int iscsi_if_create_session_done(struct iscsi_cls_conn *conn) { struct iscsi_internal *priv; diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index 3120f4b3a11a..87e786daa713 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -323,7 +323,7 @@ static int do_sas_phy_delete(struct device *dev, void *data) } /** - * sas_remove_children -- tear down a devices SAS data structures + * sas_remove_children - tear down a devices SAS data structures * @dev: device belonging to the sas object * * Removes all SAS PHYs and remote PHYs for a given object @@ -336,7 +336,7 @@ void sas_remove_children(struct device *dev) EXPORT_SYMBOL(sas_remove_children); /** - * sas_remove_host -- tear down a Scsi_Host's SAS data structures + * sas_remove_host - tear down a Scsi_Host's SAS data structures * @shost: Scsi Host that is torn down * * Removes all SAS PHYs and remote PHYs for a given Scsi_Host. @@ -577,7 +577,7 @@ static void sas_phy_release(struct device *dev) } /** - * sas_phy_alloc -- allocates and initialize a SAS PHY structure + * sas_phy_alloc - allocates and initialize a SAS PHY structure * @parent: Parent device * @number: Phy index * @@ -618,7 +618,7 @@ struct sas_phy *sas_phy_alloc(struct device *parent, int number) EXPORT_SYMBOL(sas_phy_alloc); /** - * sas_phy_add -- add a SAS PHY to the device hierarchy + * sas_phy_add - add a SAS PHY to the device hierarchy * @phy: The PHY to be added * * Publishes a SAS PHY to the rest of the system. @@ -638,7 +638,7 @@ int sas_phy_add(struct sas_phy *phy) EXPORT_SYMBOL(sas_phy_add); /** - * sas_phy_free -- free a SAS PHY + * sas_phy_free - free a SAS PHY * @phy: SAS PHY to free * * Frees the specified SAS PHY. @@ -655,7 +655,7 @@ void sas_phy_free(struct sas_phy *phy) EXPORT_SYMBOL(sas_phy_free); /** - * sas_phy_delete -- remove SAS PHY + * sas_phy_delete - remove SAS PHY * @phy: SAS PHY to remove * * Removes the specified SAS PHY. If the SAS PHY has an @@ -677,7 +677,7 @@ sas_phy_delete(struct sas_phy *phy) EXPORT_SYMBOL(sas_phy_delete); /** - * scsi_is_sas_phy -- check if a struct device represents a SAS PHY + * scsi_is_sas_phy - check if a struct device represents a SAS PHY * @dev: device to check * * Returns: @@ -843,7 +843,6 @@ EXPORT_SYMBOL(sas_port_alloc_num); /** * sas_port_add - add a SAS port to the device hierarchy - * * @port: port to be added * * publishes a port to the rest of the system @@ -868,7 +867,7 @@ int sas_port_add(struct sas_port *port) EXPORT_SYMBOL(sas_port_add); /** - * sas_port_free -- free a SAS PORT + * sas_port_free - free a SAS PORT * @port: SAS PORT to free * * Frees the specified SAS PORT. @@ -885,7 +884,7 @@ void sas_port_free(struct sas_port *port) EXPORT_SYMBOL(sas_port_free); /** - * sas_port_delete -- remove SAS PORT + * sas_port_delete - remove SAS PORT * @port: SAS PORT to remove * * Removes the specified SAS PORT. If the SAS PORT has an @@ -924,7 +923,7 @@ void sas_port_delete(struct sas_port *port) EXPORT_SYMBOL(sas_port_delete); /** - * scsi_is_sas_port -- check if a struct device represents a SAS port + * scsi_is_sas_port - check if a struct device represents a SAS port * @dev: device to check * * Returns: @@ -1309,6 +1308,7 @@ static void sas_rphy_initialize(struct sas_rphy *rphy) /** * sas_end_device_alloc - allocate an rphy for an end device + * @parent: which port * * Allocates an SAS remote PHY structure, connected to @parent. * @@ -1345,6 +1345,8 @@ EXPORT_SYMBOL(sas_end_device_alloc); /** * sas_expander_alloc - allocate an rphy for an end device + * @parent: which port + * @type: SAS_EDGE_EXPANDER_DEVICE or SAS_FANOUT_EXPANDER_DEVICE * * Allocates an SAS remote PHY structure, connected to @parent. * @@ -1383,7 +1385,7 @@ struct sas_rphy *sas_expander_alloc(struct sas_port *parent, EXPORT_SYMBOL(sas_expander_alloc); /** - * sas_rphy_add -- add a SAS remote PHY to the device hierarchy + * sas_rphy_add - add a SAS remote PHY to the device hierarchy * @rphy: The remote PHY to be added * * Publishes a SAS remote PHY to the rest of the system. @@ -1430,8 +1432,8 @@ int sas_rphy_add(struct sas_rphy *rphy) EXPORT_SYMBOL(sas_rphy_add); /** - * sas_rphy_free -- free a SAS remote PHY - * @rphy SAS remote PHY to free + * sas_rphy_free - free a SAS remote PHY + * @rphy: SAS remote PHY to free * * Frees the specified SAS remote PHY. * @@ -1459,7 +1461,7 @@ void sas_rphy_free(struct sas_rphy *rphy) EXPORT_SYMBOL(sas_rphy_free); /** - * sas_rphy_delete -- remove and free SAS remote PHY + * sas_rphy_delete - remove and free SAS remote PHY * @rphy: SAS remote PHY to remove and free * * Removes the specified SAS remote PHY and frees it. @@ -1473,7 +1475,7 @@ sas_rphy_delete(struct sas_rphy *rphy) EXPORT_SYMBOL(sas_rphy_delete); /** - * sas_rphy_remove -- remove SAS remote PHY + * sas_rphy_remove - remove SAS remote PHY * @rphy: SAS remote phy to remove * * Removes the specified SAS remote PHY. @@ -1504,7 +1506,7 @@ sas_rphy_remove(struct sas_rphy *rphy) EXPORT_SYMBOL(sas_rphy_remove); /** - * scsi_is_sas_rphy -- check if a struct device represents a SAS remote PHY + * scsi_is_sas_rphy - check if a struct device represents a SAS remote PHY * @dev: device to check * * Returns: @@ -1604,7 +1606,7 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel, SETUP_TEMPLATE(expander_attrs, expander_##field, S_IRUGO, 1) /** - * sas_attach_transport -- instantiate SAS transport template + * sas_attach_transport - instantiate SAS transport template * @ft: SAS transport class function template */ struct scsi_transport_template * @@ -1715,7 +1717,7 @@ sas_attach_transport(struct sas_function_template *ft) EXPORT_SYMBOL(sas_attach_transport); /** - * sas_release_transport -- release SAS transport template instance + * sas_release_transport - release SAS transport template instance * @t: transport template instance */ void sas_release_transport(struct scsi_transport_template *t) diff --git a/drivers/scsi/scsi_transport_srp.c b/drivers/scsi/scsi_transport_srp.c index 65c584db33bd..739e327bba09 100644 --- a/drivers/scsi/scsi_transport_srp.c +++ b/drivers/scsi/scsi_transport_srp.c @@ -242,8 +242,8 @@ struct srp_rport *srp_rport_add(struct Scsi_Host *shost, EXPORT_SYMBOL_GPL(srp_rport_add); /** - * srp_rport_del -- remove a SRP remote port - * @port: SRP remote port to remove + * srp_rport_del - remove a SRP remote port + * @rport: SRP remote port to remove * * Removes the specified SRP remote port. */ @@ -271,7 +271,7 @@ static int do_srp_rport_del(struct device *dev, void *data) } /** - * srp_remove_host -- tear down a Scsi_Host's SRP data structures + * srp_remove_host - tear down a Scsi_Host's SRP data structures * @shost: Scsi Host that is torn down * * Removes all SRP remote ports for a given Scsi_Host. @@ -297,7 +297,7 @@ static int srp_it_nexus_response(struct Scsi_Host *shost, u64 nexus, int result) } /** - * srp_attach_transport -- instantiate SRP transport template + * srp_attach_transport - instantiate SRP transport template * @ft: SRP transport class function template */ struct scsi_transport_template * @@ -337,7 +337,7 @@ srp_attach_transport(struct srp_function_template *ft) EXPORT_SYMBOL_GPL(srp_attach_transport); /** - * srp_release_transport -- release SRP transport template instance + * srp_release_transport - release SRP transport template instance * @t: transport template instance */ void srp_release_transport(struct scsi_transport_template *t) diff --git a/drivers/scsi/scsicam.c b/drivers/scsi/scsicam.c index cd68a66c7bb3..3f21bc65e8c6 100644 --- a/drivers/scsi/scsicam.c +++ b/drivers/scsi/scsicam.c @@ -24,6 +24,14 @@ static int setsize(unsigned long capacity, unsigned int *cyls, unsigned int *hds, unsigned int *secs); +/** + * scsi_bios_ptable - Read PC partition table out of first sector of device. + * @dev: from this device + * + * Description: Reads the first sector from the device and returns %0x42 bytes + * starting at offset %0x1be. + * Returns: partition table in kmalloc(GFP_KERNEL) memory, or NULL on error. + */ unsigned char *scsi_bios_ptable(struct block_device *dev) { unsigned char *res = kmalloc(66, GFP_KERNEL); @@ -43,15 +51,17 @@ unsigned char *scsi_bios_ptable(struct block_device *dev) } EXPORT_SYMBOL(scsi_bios_ptable); -/* - * Function : int scsicam_bios_param (struct block_device *bdev, ector_t capacity, int *ip) +/** + * scsicam_bios_param - Determine geometry of a disk in cylinders/heads/sectors. + * @bdev: which device + * @capacity: size of the disk in sectors + * @ip: return value: ip[0]=heads, ip[1]=sectors, ip[2]=cylinders * - * Purpose : to determine the BIOS mapping used for a drive in a + * Description : determine the BIOS mapping/geometry used for a drive in a * SCSI-CAM system, storing the results in ip as required * by the HDIO_GETGEO ioctl(). * * Returns : -1 on failure, 0 on success. - * */ int scsicam_bios_param(struct block_device *bdev, sector_t capacity, int *ip) @@ -98,15 +108,18 @@ int scsicam_bios_param(struct block_device *bdev, sector_t capacity, int *ip) } EXPORT_SYMBOL(scsicam_bios_param); -/* - * Function : static int scsi_partsize(unsigned char *buf, unsigned long - * capacity,unsigned int *cyls, unsigned int *hds, unsigned int *secs); +/** + * scsi_partsize - Parse cylinders/heads/sectors from PC partition table + * @buf: partition table, see scsi_bios_ptable() + * @capacity: size of the disk in sectors + * @cyls: put cylinders here + * @hds: put heads here + * @secs: put sectors here * - * Purpose : to determine the BIOS mapping used to create the partition + * Description: determine the BIOS mapping/geometry used to create the partition * table, storing the results in *cyls, *hds, and *secs * - * Returns : -1 on failure, 0 on success. - * + * Returns: -1 on failure, 0 on success. */ int scsi_partsize(unsigned char *buf, unsigned long capacity, @@ -194,7 +207,7 @@ EXPORT_SYMBOL(scsi_partsize); * * WORKING X3T9.2 * DRAFT 792D - * + * see http://www.t10.org/ftp/t10/drafts/cam/cam-r12b.pdf * * Revision 6 * 10-MAR-94 -- cgit v1.2.3 From 74286a3c276bca449f934b2cd921f9bced996e04 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Wed, 14 Nov 2007 18:01:21 -0600 Subject: [SCSI] DocBook scsi_midlayer.tmpl->scsi.tmpl Signed-off-by: James Bottomley --- Documentation/DocBook/Makefile | 2 +- Documentation/DocBook/scsi.tmpl | 409 +++++++++++++++++++++++++++++++ Documentation/DocBook/scsi_midlayer.tmpl | 409 ------------------------------- 3 files changed, 410 insertions(+), 410 deletions(-) create mode 100644 Documentation/DocBook/scsi.tmpl delete mode 100644 Documentation/DocBook/scsi_midlayer.tmpl (limited to 'Documentation') diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index c6c5e59daaca..6a0ad4715e9f 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -11,7 +11,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \ procfs-guide.xml writing_usb_driver.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ - genericirq.xml s390-drivers.xml uio-howto.xml scsi_midlayer.xml + genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml ### # The build process is as follows (targets): diff --git a/Documentation/DocBook/scsi.tmpl b/Documentation/DocBook/scsi.tmpl new file mode 100644 index 000000000000..6255930216b3 --- /dev/null +++ b/Documentation/DocBook/scsi.tmpl @@ -0,0 +1,409 @@ + + + + + + SCSI Mid Layer Guide + + + + James + Bottomley + +
+ James.Bottomley@steeleye.com +
+ + + + + Rob + Landley + +
+ rob@landley.net +
+ + + + + + + 2007 + Linux Foundation + + + + + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License version 2. + + + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + For more details see the file COPYING in the source + distribution of Linux. + + + + + + + + Introduction + + Protocol vs bus + + Once upon a time, the Small Computer Systems Interface defined both + a parallel I/O bus and a data protocol to connect a wide variety of + peripherals (disk drives, tape drives, modems, printers, scanners, + optical drives, test equipment, and medical devices) to a host + computer. + + + Although the old parallel (fast/wide/ultra) SCSI bus has largely + fallen out of use, the SCSI command set is more widely used than ever + to communicate with devices over a number of different busses. + + + The SCSI protocol + is a big-endian peer-to-peer packet based protocol. SCSI commands + are 6, 10, 12, or 16 bytes long, often followed by an associated data + payload. + + + SCSI commands can be transported over just about any kind of bus, and + are the default protocol for storage devices attached to USB, SATA, + SAS, Fibre Channel, FireWire, and ATAPI devices. SCSI packets are + also commonly exchanged over Infiniband, + I20, TCP/IP + (iSCSI), even + Parallel + ports. + + + + Design of the Linux SCSI subsystem + + The SCSI subsystem uses a three layer design, with upper, mid, and low + layers. Every operation involving the SCSI subsystem (such as reading + a sector from a disk) uses one driver at each of the 3 levels: one + upper layer driver, one lower layer driver, and the scsi midlayer. + + + The SCSI upper layer provides the interface between userspace and the + kernel, in the form of block and char device nodes for I/O and + ioctl(). The SCSI lower layer contains drivers for specific hardware + devices. + + + In between is the SCSI mid-layer, analogous to a network routing + layer such as the IPv4 stack. The SCSI mid-layer routes a packet + based data protocol between the upper layer's /dev nodes and the + corresponding devices in the lower layer. It manages command queues, + provides error handling and power management functions, and responds + to ioctl() requests. + + + + + + SCSI upper layer + + The upper layer supports the user-kernel interface by providing + device nodes. + + + sd (SCSI Disk) + sd (sd_mod.o) + + + + sr (SCSI CD-ROM) + sr (sr_mod.o) + + + st (SCSI Tape) + st (st.o) + + + sg (SCSI Generic) + sg (sg.o) + + + ch (SCSI Media Changer) + ch (ch.c) + + + + + SCSI mid layer + + + SCSI midlayer implementation + + include/scsi/scsi_device.h + + +!Iinclude/scsi/scsi_device.h + + + + drivers/scsi/scsi.c + Main file for the scsi midlayer. +!Edrivers/scsi/scsi.c + + + drivers/scsi/scsicam.c + + SCSI + Common Access Method support functions, for use with + HDIO_GETGEO, etc. + +!Edrivers/scsi/scsicam.c + + + drivers/scsi/scsi_error.c + Common SCSI error/timeout handling routines. +!Edrivers/scsi/scsi_error.c + + + drivers/scsi/scsi_devinfo.c + + Manage scsi_dev_info_list, which tracks blacklisted and whitelisted + devices. + +!Idrivers/scsi/scsi_devinfo.c + + + drivers/scsi/scsi_ioctl.c + + Handle ioctl() calls for scsi devices. + +!Edrivers/scsi/scsi_ioctl.c + + + drivers/scsi/scsi_lib.c + + SCSI queuing library. + +!Edrivers/scsi/scsi_lib.c + + + drivers/scsi/scsi_lib_dma.c + + SCSI library functions depending on DMA + (map and unmap scatter-gather lists). + +!Edrivers/scsi/scsi_lib_dma.c + + + drivers/scsi/scsi_module.c + + The file drivers/scsi/scsi_module.c contains legacy support for + old-style host templates. It should never be used by any new driver. + + + + drivers/scsi/scsi_proc.c + + The functions in this file provide an interface between + the PROC file system and the SCSI device drivers + It is mainly used for debugging, statistics and to pass + information directly to the lowlevel driver. + + I.E. plumbing to manage /proc/scsi/* + +!Idrivers/scsi/scsi_proc.c + + + drivers/scsi/scsi_netlink.c + + Infrastructure to provide async events from transports to userspace + via netlink, using a single NETLINK_SCSITRANSPORT protocol for all + transports. + + See the + original patch submission for more details. + +!Idrivers/scsi/scsi_netlink.c + + + drivers/scsi/scsi_scan.c + + Scan a host to determine which (if any) devices are attached. + + The general scanning/probing algorithm is as follows, exceptions are + made to it depending on device specific flags, compilation options, + and global variable (boot or module load time) settings. + + A specific LUN is scanned via an INQUIRY command; if the LUN has a + device attached, a scsi_device is allocated and setup for it. + + For every id of every channel on the given host, start by scanning + LUN 0. Skip hosts that don't respond at all to a scan of LUN 0. + Otherwise, if LUN 0 has a device attached, allocate and setup a + scsi_device for it. If target is SCSI-3 or up, issue a REPORT LUN, + and scan all of the LUNs returned by the REPORT LUN; else, + sequentially scan LUNs up until some maximum is reached, or a LUN is + seen that cannot have a device attached to it. + +!Idrivers/scsi/scsi_scan.c + + + drivers/scsi/scsi_sysctl.c + + Set up the sysctl entry: "/dev/scsi/logging_level" + (DEV_SCSI_LOGGING_LEVEL) which sets/returns scsi_logging_level. + + + + drivers/scsi/scsi_sysfs.c + + SCSI sysfs interface routines. + +!Edrivers/scsi/scsi_sysfs.c + + + drivers/scsi/hosts.c + + mid to lowlevel SCSI driver interface + +!Edrivers/scsi/hosts.c + + + drivers/scsi/constants.c + + mid to lowlevel SCSI driver interface + +!Edrivers/scsi/constants.c + + + + + Transport classes + + Transport classes are service libraries for drivers in the scsi + lower layer, which expose transport attributes in sysfs. + + + Fibre Channel transport + + The file drivers/scsi/scsi_transport_fc.c defines transport attributes + for Fibre Channel. + +!Edrivers/scsi/scsi_transport_fc.c + + + iSCSI transport class + + The file drivers/scsi/scsi_transport_iscsi.c defines transport + attributes for the iSCSI class, which sends SCSI packets over TCP/IP + connections. + +!Edrivers/scsi/scsi_transport_iscsi.c + + + Serial Attached SCSI (SAS) transport class + + The file drivers/scsi/scsi_transport_sas.c defines transport + attributes for Serial Attached SCSI, a variant of SATA aimed at + large high-end systems. + + + The SAS transport class contains common code to deal with SAS HBAs, + an aproximated representation of SAS topologies in the driver model, + and various sysfs attributes to expose these topologies and managment + interfaces to userspace. + + + In addition to the basic SCSI core objects this transport class + introduces two additional intermediate objects: The SAS PHY + as represented by struct sas_phy defines an "outgoing" PHY on + a SAS HBA or Expander, and the SAS remote PHY represented by + struct sas_rphy defines an "incoming" PHY on a SAS Expander or + end device. Note that this is purely a software concept, the + underlying hardware for a PHY and a remote PHY is the exactly + the same. + + + There is no concept of a SAS port in this code, users can see + what PHYs form a wide port based on the port_identifier attribute, + which is the same for all PHYs in a port. + +!Edrivers/scsi/scsi_transport_sas.c + + + SATA transport class + + The SATA transport is handled by libata, which has its own book of + documentation in this directory. + + + + Parallel SCSI (SPI) transport class + + The file drivers/scsi/scsi_transport_spi.c defines transport + attributes for traditional (fast/wide/ultra) SCSI busses. + +!Edrivers/scsi/scsi_transport_spi.c + + + SCSI RDMA (SRP) transport class + + The file drivers/scsi/scsi_transport_srp.c defines transport + attributes for SCSI over Remote Direct Memory Access. + +!Edrivers/scsi/scsi_transport_srp.c + + + + + + + SCSI lower layer + + Host Bus Adapter transport types + + Many modern device controllers use the SCSI command set as a protocol to + communicate with their devices through many different types of physical + connections. + + + In SCSI language a bus capable of carrying SCSI commands is + called a "transport", and a controller connecting to such a bus is + called a "host bus adapter" (HBA). + + + Debug transport + + The file drivers/scsi/scsi_debug.c simulates a host adapter with a + variable number of disks (or disk like devices) attached, sharing a + common amount of RAM. Does a lot of checking to make sure that we are + not getting blocks mixed up, and panics the kernel if anything out of + the ordinary is seen. + + + To be more realistic, the simulated devices have the transport + attributes of SAS disks. + + + For documentation see + http://www.torque.net/sg/sdebug26.html + + + + + todo + Parallel (fast/wide/ultra) SCSI, USB, SATA, + SAS, Fibre Channel, FireWire, ATAPI devices, Infiniband, + I20, iSCSI, Parallel ports, netlink... + + + + + diff --git a/Documentation/DocBook/scsi_midlayer.tmpl b/Documentation/DocBook/scsi_midlayer.tmpl deleted file mode 100644 index 6255930216b3..000000000000 --- a/Documentation/DocBook/scsi_midlayer.tmpl +++ /dev/null @@ -1,409 +0,0 @@ - - - - - - SCSI Mid Layer Guide - - - - James - Bottomley - -
- James.Bottomley@steeleye.com -
- - - - - Rob - Landley - -
- rob@landley.net -
- - - - - - - 2007 - Linux Foundation - - - - - This documentation is free software; you can redistribute - it and/or modify it under the terms of the GNU General Public - License version 2. - - - - This program is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - For more details see the file COPYING in the source - distribution of Linux. - - - - - - - - Introduction - - Protocol vs bus - - Once upon a time, the Small Computer Systems Interface defined both - a parallel I/O bus and a data protocol to connect a wide variety of - peripherals (disk drives, tape drives, modems, printers, scanners, - optical drives, test equipment, and medical devices) to a host - computer. - - - Although the old parallel (fast/wide/ultra) SCSI bus has largely - fallen out of use, the SCSI command set is more widely used than ever - to communicate with devices over a number of different busses. - - - The SCSI protocol - is a big-endian peer-to-peer packet based protocol. SCSI commands - are 6, 10, 12, or 16 bytes long, often followed by an associated data - payload. - - - SCSI commands can be transported over just about any kind of bus, and - are the default protocol for storage devices attached to USB, SATA, - SAS, Fibre Channel, FireWire, and ATAPI devices. SCSI packets are - also commonly exchanged over Infiniband, - I20, TCP/IP - (iSCSI), even - Parallel - ports. - - - - Design of the Linux SCSI subsystem - - The SCSI subsystem uses a three layer design, with upper, mid, and low - layers. Every operation involving the SCSI subsystem (such as reading - a sector from a disk) uses one driver at each of the 3 levels: one - upper layer driver, one lower layer driver, and the scsi midlayer. - - - The SCSI upper layer provides the interface between userspace and the - kernel, in the form of block and char device nodes for I/O and - ioctl(). The SCSI lower layer contains drivers for specific hardware - devices. - - - In between is the SCSI mid-layer, analogous to a network routing - layer such as the IPv4 stack. The SCSI mid-layer routes a packet - based data protocol between the upper layer's /dev nodes and the - corresponding devices in the lower layer. It manages command queues, - provides error handling and power management functions, and responds - to ioctl() requests. - - - - - - SCSI upper layer - - The upper layer supports the user-kernel interface by providing - device nodes. - - - sd (SCSI Disk) - sd (sd_mod.o) - - - - sr (SCSI CD-ROM) - sr (sr_mod.o) - - - st (SCSI Tape) - st (st.o) - - - sg (SCSI Generic) - sg (sg.o) - - - ch (SCSI Media Changer) - ch (ch.c) - - - - - SCSI mid layer - - - SCSI midlayer implementation - - include/scsi/scsi_device.h - - -!Iinclude/scsi/scsi_device.h - - - - drivers/scsi/scsi.c - Main file for the scsi midlayer. -!Edrivers/scsi/scsi.c - - - drivers/scsi/scsicam.c - - SCSI - Common Access Method support functions, for use with - HDIO_GETGEO, etc. - -!Edrivers/scsi/scsicam.c - - - drivers/scsi/scsi_error.c - Common SCSI error/timeout handling routines. -!Edrivers/scsi/scsi_error.c - - - drivers/scsi/scsi_devinfo.c - - Manage scsi_dev_info_list, which tracks blacklisted and whitelisted - devices. - -!Idrivers/scsi/scsi_devinfo.c - - - drivers/scsi/scsi_ioctl.c - - Handle ioctl() calls for scsi devices. - -!Edrivers/scsi/scsi_ioctl.c - - - drivers/scsi/scsi_lib.c - - SCSI queuing library. - -!Edrivers/scsi/scsi_lib.c - - - drivers/scsi/scsi_lib_dma.c - - SCSI library functions depending on DMA - (map and unmap scatter-gather lists). - -!Edrivers/scsi/scsi_lib_dma.c - - - drivers/scsi/scsi_module.c - - The file drivers/scsi/scsi_module.c contains legacy support for - old-style host templates. It should never be used by any new driver. - - - - drivers/scsi/scsi_proc.c - - The functions in this file provide an interface between - the PROC file system and the SCSI device drivers - It is mainly used for debugging, statistics and to pass - information directly to the lowlevel driver. - - I.E. plumbing to manage /proc/scsi/* - -!Idrivers/scsi/scsi_proc.c - - - drivers/scsi/scsi_netlink.c - - Infrastructure to provide async events from transports to userspace - via netlink, using a single NETLINK_SCSITRANSPORT protocol for all - transports. - - See the - original patch submission for more details. - -!Idrivers/scsi/scsi_netlink.c - - - drivers/scsi/scsi_scan.c - - Scan a host to determine which (if any) devices are attached. - - The general scanning/probing algorithm is as follows, exceptions are - made to it depending on device specific flags, compilation options, - and global variable (boot or module load time) settings. - - A specific LUN is scanned via an INQUIRY command; if the LUN has a - device attached, a scsi_device is allocated and setup for it. - - For every id of every channel on the given host, start by scanning - LUN 0. Skip hosts that don't respond at all to a scan of LUN 0. - Otherwise, if LUN 0 has a device attached, allocate and setup a - scsi_device for it. If target is SCSI-3 or up, issue a REPORT LUN, - and scan all of the LUNs returned by the REPORT LUN; else, - sequentially scan LUNs up until some maximum is reached, or a LUN is - seen that cannot have a device attached to it. - -!Idrivers/scsi/scsi_scan.c - - - drivers/scsi/scsi_sysctl.c - - Set up the sysctl entry: "/dev/scsi/logging_level" - (DEV_SCSI_LOGGING_LEVEL) which sets/returns scsi_logging_level. - - - - drivers/scsi/scsi_sysfs.c - - SCSI sysfs interface routines. - -!Edrivers/scsi/scsi_sysfs.c - - - drivers/scsi/hosts.c - - mid to lowlevel SCSI driver interface - -!Edrivers/scsi/hosts.c - - - drivers/scsi/constants.c - - mid to lowlevel SCSI driver interface - -!Edrivers/scsi/constants.c - - - - - Transport classes - - Transport classes are service libraries for drivers in the scsi - lower layer, which expose transport attributes in sysfs. - - - Fibre Channel transport - - The file drivers/scsi/scsi_transport_fc.c defines transport attributes - for Fibre Channel. - -!Edrivers/scsi/scsi_transport_fc.c - - - iSCSI transport class - - The file drivers/scsi/scsi_transport_iscsi.c defines transport - attributes for the iSCSI class, which sends SCSI packets over TCP/IP - connections. - -!Edrivers/scsi/scsi_transport_iscsi.c - - - Serial Attached SCSI (SAS) transport class - - The file drivers/scsi/scsi_transport_sas.c defines transport - attributes for Serial Attached SCSI, a variant of SATA aimed at - large high-end systems. - - - The SAS transport class contains common code to deal with SAS HBAs, - an aproximated representation of SAS topologies in the driver model, - and various sysfs attributes to expose these topologies and managment - interfaces to userspace. - - - In addition to the basic SCSI core objects this transport class - introduces two additional intermediate objects: The SAS PHY - as represented by struct sas_phy defines an "outgoing" PHY on - a SAS HBA or Expander, and the SAS remote PHY represented by - struct sas_rphy defines an "incoming" PHY on a SAS Expander or - end device. Note that this is purely a software concept, the - underlying hardware for a PHY and a remote PHY is the exactly - the same. - - - There is no concept of a SAS port in this code, users can see - what PHYs form a wide port based on the port_identifier attribute, - which is the same for all PHYs in a port. - -!Edrivers/scsi/scsi_transport_sas.c - - - SATA transport class - - The SATA transport is handled by libata, which has its own book of - documentation in this directory. - - - - Parallel SCSI (SPI) transport class - - The file drivers/scsi/scsi_transport_spi.c defines transport - attributes for traditional (fast/wide/ultra) SCSI busses. - -!Edrivers/scsi/scsi_transport_spi.c - - - SCSI RDMA (SRP) transport class - - The file drivers/scsi/scsi_transport_srp.c defines transport - attributes for SCSI over Remote Direct Memory Access. - -!Edrivers/scsi/scsi_transport_srp.c - - - - - - - SCSI lower layer - - Host Bus Adapter transport types - - Many modern device controllers use the SCSI command set as a protocol to - communicate with their devices through many different types of physical - connections. - - - In SCSI language a bus capable of carrying SCSI commands is - called a "transport", and a controller connecting to such a bus is - called a "host bus adapter" (HBA). - - - Debug transport - - The file drivers/scsi/scsi_debug.c simulates a host adapter with a - variable number of disks (or disk like devices) attached, sharing a - common amount of RAM. Does a lot of checking to make sure that we are - not getting blocks mixed up, and panics the kernel if anything out of - the ordinary is seen. - - - To be more realistic, the simulated devices have the transport - attributes of SAS disks. - - - For documentation see - http://www.torque.net/sg/sdebug26.html - - - - - todo - Parallel (fast/wide/ultra) SCSI, USB, SATA, - SAS, Fibre Channel, FireWire, ATAPI devices, Infiniband, - I20, iSCSI, Parallel ports, netlink... - - - - - -- cgit v1.2.3 From f28cd7cf8f696eafe42d1632b5a306fbf784d3cd Mon Sep 17 00:00:00 2001 From: bo yang Date: Fri, 9 Nov 2007 04:44:56 -0500 Subject: [SCSI] megaraid_sas: Update version and changelog Update version and changelog Signed-off-by: Bo Yang Signed-off-by: James Bottomley --- Documentation/scsi/ChangeLog.megaraid_sas | 159 ++++++++++++++++++++++++++++++ drivers/scsi/megaraid/megaraid_sas.c | 10 +- drivers/scsi/megaraid/megaraid_sas.h | 8 +- 3 files changed, 168 insertions(+), 9 deletions(-) (limited to 'Documentation') diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index 5eb927544990..91c81db0ba71 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas @@ -1,3 +1,162 @@ +1 Release Date : Thur. Nov. 07 16:30:43 PST 2007 - + (emaild-id:megaraidlinux@lsi.com) + Sumant Patro + Bo Yang + +2 Current Version : 00.00.03.16 +3 Older Version : 00.00.03.15 + +1. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from 10. FW may take + a max of 60 seconds to respond to the INIT cmd. + +1 Release Date : Fri. Sep. 07 16:30:43 PST 2007 - + (emaild-id:megaraidlinux@lsi.com) + Sumant Patro + Bo Yang + +2 Current Version : 00.00.03.15 +3 Older Version : 00.00.03.14 + +1. Added module parameter "poll_mode_io" to support for "polling" + (reduced interrupt operation). In this mode, IO completion + interrupts are delayed. At the end of initiating IOs, the + driver schedules for cmd completion if there are pending cmds + to be completed. A timer-based interrupt has also been added + to prevent IO completion processing from being delayed + indefinitely in the case that no new IOs are initiated. + +1 Release Date : Fri. Sep. 07 16:30:43 PST 2007 - + (emaild-id:megaraidlinux@lsi.com) + Sumant Patro + Bo Yang + +2 Current Version : 00.00.03.14 +3 Older Version : 00.00.03.13 + +1. Setting the max_sectors_per_req based on max SGL supported by the + FW. Prior versions calculated this value from controller info + (max_sectors_1, max_sectors_2). For certain controllers/FW, + this was resulting in a value greater than max SGL supported + by the FW. Issue was first reported by users running LUKS+XFS + with megaraid_sas. Thanks to RB for providing the logs and + duplication steps that helped to get to the root cause of the + issue. 2. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from + 10. FW may take a max of 60 seconds to respond to the INIT + cmd. + +1 Release Date : Fri. June. 15 16:30:43 PST 2007 - + (emaild-id:megaraidlinux@lsi.com) + Sumant Patro + Bo Yang + +2 Current Version : 00.00.03.13 +3 Older Version : 00.00.03.12 + +1. Added the megasas_reset_timer routine to intercept cmd timeout and throttle io. + +On Fri, 2007-03-16 at 16:44 -0600, James Bottomley wrote: +It looks like megaraid_sas at least needs this to throttle its commands +> as they begin to time out. The code keeps the existing transport +> template use of eh_timed_out (and allows the transport to override the +> host if they both have this callback). +> +> James + +1 Release Date : Sat May. 12 16:30:43 PST 2007 - + (emaild-id:megaraidlinux@lsi.com) + Sumant Patro + Bo Yang + +2 Current Version : 00.00.03.12 +3 Older Version : 00.00.03.11 + +1. When MegaSAS driver receives reset call from OS, driver waits in reset +routine for max 3 minutes for all pending command completion. Now driver will +call completion routine every 5 seconds from the reset routine instead of +waiting for depending on cmd completion from isr path. + +1 Release Date : Mon Apr. 30 10:25:52 PST 2007 - + (emaild-id:megaraidlinux@lsi.com) + Sumant Patro + Bo Yang + +2 Current Version : 00.00.03.11 +3 Older Version : 00.00.03.09 + + 1. Memory Manager for IOCTL removed for 2.6 kernels. + pci_alloc_consistent replaced by dma_alloc_coherent. With this + change there is no need of memory manager in the driver code + + On Wed, 2007-02-07 at 13:30 -0800, Andrew Morton wrote: + > I suspect all this horror is due to stupidity in the DMA API. + > + > pci_alloc_consistent() just goes and assumes GFP_ATOMIC, whereas + > the caller (megasas_mgmt_fw_ioctl) would have been perfectly happy + > to use GFP_KERNEL. + > + > I bet this fixes it + + It does, but the DMA API was expanded to cope with this exact case, so + use dma_alloc_coherent() directly in the megaraid code instead. The dev + is just &pci_dev->dev. + + James + + 3. SYNCHRONIZE_CACHE is not supported by FW and thus blocked by driver. + 4. Hibernation support added + 5. Performing diskdump while running IO in RHEL 4 was failing. Fixed. + +1 Release Date : Fri Feb. 09 14:36:28 PST 2007 - + (emaild-id:megaraidlinux@lsi.com) + Sumant Patro + Bo Yang + +2 Current Version : 00.00.03.09 +3 Older Version : 00.00.03.08 + +i. Under heavy IO mid-layer prints "DRIVER_TIMEOUT" errors + + The driver now waits for 10 seconds to elapse instead of 5 (as in + previous release) to resume IO. + +1 Release Date : Mon Feb. 05 11:35:24 PST 2007 - + (emaild-id:megaraidlinux@lsi.com) + Sumant Patro + Bo Yang +2 Current Version : 00.00.03.08 +3 Older Version : 00.00.03.07 + +i. Under heavy IO mid-layer prints "DRIVER_TIMEOUT" errors + + Fix: The driver is now throttling IO. + Checks added in megasas_queue_command to know if FW is able to + process commands within timeout period. If number of retries + is 2 or greater,the driver stops sending cmd to FW temporarily. IO is + resumed if pending cmd count reduces to 16 or 5 seconds has elapsed + from the time cmds were last sent to FW. + +ii. FW enables WCE bit in Mode Sense cmd for drives that are configured + as WriteBack. The OS may send "SYNCHRONIZE_CACHE" cmd when Logical + Disks are exposed with WCE=1. User is advised to enable Write Back + mode only when the controller has battery backup. At this time + Synhronize cache is not supported by the FW. Driver will short-cycle + the cmd and return sucess without sending down to FW. + +1 Release Date : Sun Jan. 14 11:21:32 PDT 2007 - + Sumant Patro /Bo Yang +2 Current Version : 00.00.03.07 +3 Older Version : 00.00.03.06 + +i. bios_param entry added in scsi_host_template that returns disk geometry + information. + +1 Release Date : Fri Oct 20 11:21:32 PDT 2006 - Sumant Patro /Bo Yang +2 Current Version : 00.00.03.06 +3 Older Version : 00.00.03.05 + +1. Added new memory management module to support the IOCTL memory allocation. For IOCTL we try to allocate from the memory pool created during driver initialization. If mem pool is empty then we allocate at run time. +2. Added check in megasas_queue_command and dpc/isr routine to see if we have already declared adapter dead + (hw_crit_error=1). If hw_crit_error==1, now we donot accept any processing of pending cmds/accept any cmd from OS 1 Release Date : Mon Oct 02 11:21:32 PDT 2006 - Sumant Patro 2 Current Version : 00.00.03.05 diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 499f994f503d..d7ec921865c4 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -2,7 +2,7 @@ * * Linux MegaRAID driver for SAS based RAID controllers * - * Copyright (c) 2003-2005 LSI Logic Corporation. + * Copyright (c) 2003-2005 LSI Corporation. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -10,7 +10,7 @@ * 2 of the License, or (at your option) any later version. * * FILE : megaraid_sas.c - * Version : v00.00.03.10-rc5 + * Version : v00.00.03.16-rc1 * * Authors: * (email-id : megaraidlinux@lsi.com) @@ -58,7 +58,7 @@ MODULE_PARM_DESC(poll_mode_io, MODULE_LICENSE("GPL"); MODULE_VERSION(MEGASAS_VERSION); MODULE_AUTHOR("megaraidlinux@lsi.com"); -MODULE_DESCRIPTION("LSI Logic MegaRAID SAS Driver"); +MODULE_DESCRIPTION("LSI MegaRAID SAS Driver"); /* * PCI ID table for all supported controllers @@ -1182,7 +1182,7 @@ megasas_service_aen(struct megasas_instance *instance, struct megasas_cmd *cmd) static struct scsi_host_template megasas_template = { .module = THIS_MODULE, - .name = "LSI Logic SAS based MegaRAID driver", + .name = "LSI SAS based MegaRAID driver", .proc_name = "megaraid_sas", .slave_configure = megasas_slave_configure, .queuecommand = megasas_queue_command, @@ -1966,7 +1966,7 @@ static int megasas_init_mfi(struct megasas_instance *instance) */ instance->base_addr = pci_resource_start(instance->pdev, 0); - if (pci_request_regions(instance->pdev, "megasas: LSI Logic")) { + if (pci_request_regions(instance->pdev, "megasas: LSI")) { printk(KERN_DEBUG "megasas: IO memory region busy!\n"); return -EBUSY; } diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index dcc66fc9c2cb..6466bdf548c2 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -2,7 +2,7 @@ * * Linux MegaRAID driver for SAS based RAID controllers * - * Copyright (c) 2003-2005 LSI Logic Corporation. + * Copyright (c) 2003-2005 LSI Corporation. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -18,9 +18,9 @@ /* * MegaRAID SAS Driver meta data */ -#define MEGASAS_VERSION "00.00.03.10-rc5" -#define MEGASAS_RELDATE "May 17, 2007" -#define MEGASAS_EXT_VERSION "Thu May 17 10:09:32 PDT 2007" +#define MEGASAS_VERSION "00.00.03.16-rc1" +#define MEGASAS_RELDATE "Nov. 07, 2007" +#define MEGASAS_EXT_VERSION "Thu. Nov. 07 10:09:32 PDT 2007" /* * Device IDs -- cgit v1.2.3 From 6af6632a1c1cac169fe7fbedb2f642b4ebb38323 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 14 Nov 2007 16:52:25 -0800 Subject: [SCSI] boot options: correct option name and tell where to find docs for it Minor corrections and additions to 'scsi_logging_level', as pointed out by Chuck Ebbert. Also point out the IBM S390-tools 'scsi_logging_level' script. Signed-off-by: Randy Dunlap Signed-off-by: James Bottomley --- Documentation/kernel-parameters.txt | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c4178778e7fd..99938b8b50e1 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1593,7 +1593,13 @@ and is between 256 and 4096 characters. It is defined in the file Format: :: (flags are integer value) - scsi_logging= [SCSI] + scsi_logging_level= [SCSI] a bit mask of logging levels + See drivers/scsi/scsi_logging.h for bits. Also + settable via sysctl at dev.scsi.logging_level + (/proc/sys/dev/scsi/logging_level). + There is also a nice 'scsi_logging_level' script in the + S390-tools package, available for download at + http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html scsi_mod.scan= [SCSI] sync (default) scans SCSI busses as they are discovered. async scans them in kernel threads, -- cgit v1.2.3 From dc8875e1078961591af4fbf9556c44648bf28d11 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 15 Nov 2007 15:42:30 -0800 Subject: [SCSI] docbook and kernel-doc updates - Change title to remove "Mid-Layer" since the doc is about all of the SCSI layers. - Use "SCSI" instead of "scsi" in docbook text. - Use "*/" to end kernel-doc notation blocks. - A few other minor typo fixes. Signed-off-by: Randy Dunlap Signed-off-by: James Bottomley --- Documentation/DocBook/scsi.tmpl | 10 ++--- drivers/scsi/scsi.c | 2 +- drivers/scsi/scsi_error.c | 79 +++++++++++++++++++-------------------- drivers/scsi/scsi_transport_srp.c | 3 +- 4 files changed, 45 insertions(+), 49 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/scsi.tmpl b/Documentation/DocBook/scsi.tmpl index 6255930216b3..f299ab182bbe 100644 --- a/Documentation/DocBook/scsi.tmpl +++ b/Documentation/DocBook/scsi.tmpl @@ -4,7 +4,7 @@ - SCSI Mid Layer Guide + SCSI Interfaces Guide @@ -92,7 +92,7 @@ The SCSI subsystem uses a three layer design, with upper, mid, and low layers. Every operation involving the SCSI subsystem (such as reading a sector from a disk) uses one driver at each of the 3 levels: one - upper layer driver, one lower layer driver, and the scsi midlayer. + upper layer driver, one lower layer driver, and the SCSI midlayer. The SCSI upper layer provides the interface between userspace and the @@ -154,7 +154,7 @@ drivers/scsi/scsi.c - Main file for the scsi midlayer. + Main file for the SCSI midlayer. !Edrivers/scsi/scsi.c @@ -182,7 +182,7 @@ drivers/scsi/scsi_ioctl.c - Handle ioctl() calls for scsi devices. + Handle ioctl() calls for SCSI devices. !Edrivers/scsi/scsi_ioctl.c @@ -287,7 +287,7 @@ Transport classes - Transport classes are service libraries for drivers in the scsi + Transport classes are service libraries for drivers in the SCSI lower layer, which expose transport attributes in sysfs. diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 412a351c6cf7..ebc019380835 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -960,7 +960,7 @@ EXPORT_SYMBOL(__starget_for_each_device); * reference. You must hold the host's host_lock over this call and * any access to the returned scsi_device. * - * Note: The only reason why drivers would want to use this is because + * Note: The only reason why drivers should use this is because * they need to access the device list in irq context. Otherwise you * really want to use scsi_device_lookup_by_target instead. **/ diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 22f8140598ba..169bc595648a 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -62,7 +62,7 @@ void scsi_eh_wakeup(struct Scsi_Host *shost) * @shost: SCSI host to invoke error handling on. * * Schedule SCSI EH without scmd. - **/ + */ void scsi_schedule_eh(struct Scsi_Host *shost) { unsigned long flags; @@ -86,7 +86,7 @@ EXPORT_SYMBOL_GPL(scsi_schedule_eh); * * Return value: * 0 on failure. - **/ + */ int scsi_eh_scmd_add(struct scsi_cmnd *scmd, int eh_flag) { struct Scsi_Host *shost = scmd->device->host; @@ -121,7 +121,7 @@ int scsi_eh_scmd_add(struct scsi_cmnd *scmd, int eh_flag) * This should be turned into an inline function. Each scsi command * has its own timer, and as it is added to the queue, we set up the * timer. When the command completes, we cancel the timer. - **/ + */ void scsi_add_timer(struct scsi_cmnd *scmd, int timeout, void (*complete)(struct scsi_cmnd *)) { @@ -155,7 +155,7 @@ void scsi_add_timer(struct scsi_cmnd *scmd, int timeout, * Return value: * 1 if we were able to detach the timer. 0 if we blew it, and the * timer function has already started to run. - **/ + */ int scsi_delete_timer(struct scsi_cmnd *scmd) { int rtn; @@ -181,7 +181,7 @@ int scsi_delete_timer(struct scsi_cmnd *scmd) * only in that the normal completion handling might run, but if the * normal completion function determines that the timer has already * fired, then it mustn't do anything. - **/ + */ void scsi_times_out(struct scsi_cmnd *scmd) { enum scsi_eh_timer_return (* eh_timed_out)(struct scsi_cmnd *); @@ -224,7 +224,7 @@ void scsi_times_out(struct scsi_cmnd *scmd) * * Return value: * 0 when dev was taken offline by error recovery. 1 OK to proceed. - **/ + */ int scsi_block_when_processing_errors(struct scsi_device *sdev) { int online; @@ -245,7 +245,7 @@ EXPORT_SYMBOL(scsi_block_when_processing_errors); * scsi_eh_prt_fail_stats - Log info on failures. * @shost: scsi host being recovered. * @work_q: Queue of scsi cmds to process. - **/ + */ static inline void scsi_eh_prt_fail_stats(struct Scsi_Host *shost, struct list_head *work_q) { @@ -295,7 +295,7 @@ static inline void scsi_eh_prt_fail_stats(struct Scsi_Host *shost, * Notes: * When a deferred error is detected the current command has * not been executed and needs retrying. - **/ + */ static int scsi_check_sense(struct scsi_cmnd *scmd) { struct scsi_sense_hdr sshdr; @@ -398,7 +398,7 @@ static int scsi_check_sense(struct scsi_cmnd *scmd) * queued during error recovery. the main difference here is that we * don't allow for the possibility of retries here, and we are a lot * more restrictive about what we consider acceptable. - **/ + */ static int scsi_eh_completed_normally(struct scsi_cmnd *scmd) { /* @@ -452,7 +452,7 @@ static int scsi_eh_completed_normally(struct scsi_cmnd *scmd) /** * scsi_eh_done - Completion function for error handling. * @scmd: Cmd that is done. - **/ + */ static void scsi_eh_done(struct scsi_cmnd *scmd) { struct completion *eh_action; @@ -469,7 +469,7 @@ static void scsi_eh_done(struct scsi_cmnd *scmd) /** * scsi_try_host_reset - ask host adapter to reset itself * @scmd: SCSI cmd to send hsot reset. - **/ + */ static int scsi_try_host_reset(struct scsi_cmnd *scmd) { unsigned long flags; @@ -498,7 +498,7 @@ static int scsi_try_host_reset(struct scsi_cmnd *scmd) /** * scsi_try_bus_reset - ask host to perform a bus reset * @scmd: SCSI cmd to send bus reset. - **/ + */ static int scsi_try_bus_reset(struct scsi_cmnd *scmd) { unsigned long flags; @@ -533,7 +533,7 @@ static int scsi_try_bus_reset(struct scsi_cmnd *scmd) * unreliable for a given host, then the host itself needs to put a * timer on it, and set the host back to a consistent state prior to * returning. - **/ + */ static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd) { int rtn; @@ -568,7 +568,7 @@ static int __scsi_try_to_abort_cmd(struct scsi_cmnd *scmd) * author of the low-level driver wishes this operation to be timed, * they can provide this facility themselves. helper functions in * scsi_error.c can be supplied to make this easier to do. - **/ + */ static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd) { /* @@ -601,7 +601,7 @@ static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd) * sent must be one that does not transfer any data. If @sense_bytes != 0 * @cmnd is ignored and this functions sets up a REQUEST_SENSE command * and cmnd buffers to read @sense_bytes into @scmd->sense_buffer. - **/ + */ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses, unsigned char *cmnd, int cmnd_size, unsigned sense_bytes) { @@ -667,7 +667,7 @@ EXPORT_SYMBOL(scsi_eh_prep_cmnd); * @ses: saved information from a coresponding call to scsi_prep_eh_cmnd * * Undo any damage done by above scsi_prep_eh_cmnd(). - **/ + */ void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses) { /* @@ -697,7 +697,7 @@ EXPORT_SYMBOL(scsi_eh_restore_cmnd); * * Return value: * SUCCESS or FAILED or NEEDS_RETRY - **/ + */ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, int cmnd_size, int timeout, unsigned sense_bytes) { @@ -765,7 +765,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, * Some hosts automatically obtain this information, others require * that we obtain it on our own. This function will *not* return until * the command either times out, or it completes. - **/ + */ static int scsi_request_sense(struct scsi_cmnd *scmd) { return scsi_send_eh_cmnd(scmd, NULL, 0, SENSE_TIMEOUT, ~0); @@ -782,7 +782,7 @@ static int scsi_request_sense(struct scsi_cmnd *scmd) * and that would disturb what we are doing. Thus we really want to * keep a list of pending commands for final completion, and once we * are ready to leave error handling we handle completion for real. - **/ + */ void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q) { scmd->device->host->host_failed--; @@ -810,7 +810,7 @@ EXPORT_SYMBOL(scsi_eh_finish_cmd); * * XXX: Long term this code should go away, but that needs an audit of * all LLDDs first. - **/ + */ int scsi_eh_get_sense(struct list_head *work_q, struct list_head *done_q) { @@ -862,7 +862,7 @@ EXPORT_SYMBOL_GPL(scsi_eh_get_sense); * * Return value: * 0 - Device is ready. 1 - Device NOT ready. - **/ + */ static int scsi_eh_tur(struct scsi_cmnd *scmd) { static unsigned char tur_command[6] = {TEST_UNIT_READY, 0, 0, 0, 0, 0}; @@ -897,7 +897,7 @@ retry_tur: * command that has timed out. If the command simply failed, it makes * no sense to try and abort the command, since as far as the shost * adapter is concerned, it isn't running. - **/ + */ static int scsi_eh_abort_cmds(struct list_head *work_q, struct list_head *done_q) { @@ -935,7 +935,7 @@ static int scsi_eh_abort_cmds(struct list_head *work_q, * * Return value: * 0 - Device is ready. 1 - Device NOT ready. - **/ + */ static int scsi_eh_try_stu(struct scsi_cmnd *scmd) { static unsigned char stu_command[6] = {START_STOP, 0, 0, 0, 1, 0}; @@ -963,7 +963,7 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd) * Notes: * If commands are failing due to not ready, initializing command required, * try revalidating the device, which will end up sending a start unit. - **/ + */ static int scsi_eh_stu(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q) @@ -1017,7 +1017,7 @@ static int scsi_eh_stu(struct Scsi_Host *shost, * devices that are jammed or not - if we have multiple devices, it * makes no sense to try bus_device_reset - we really would need to try * a bus_reset instead. - **/ + */ static int scsi_eh_bus_device_reset(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q) @@ -1068,7 +1068,7 @@ static int scsi_eh_bus_device_reset(struct Scsi_Host *shost, * @shost: &scsi host being recovered. * @work_q: &list_head for pending commands. * @done_q: &list_head for processed commands. - **/ + */ static int scsi_eh_bus_reset(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q) @@ -1125,7 +1125,7 @@ static int scsi_eh_bus_reset(struct Scsi_Host *shost, * scsi_eh_host_reset - send a host reset * @work_q: list_head for processed commands. * @done_q: list_head for processed commands. - **/ + */ static int scsi_eh_host_reset(struct list_head *work_q, struct list_head *done_q) { @@ -1160,8 +1160,7 @@ static int scsi_eh_host_reset(struct list_head *work_q, * scsi_eh_offline_sdevs - offline scsi devices that fail to recover * @work_q: list_head for processed commands. * @done_q: list_head for processed commands. - * - **/ + */ static void scsi_eh_offline_sdevs(struct list_head *work_q, struct list_head *done_q) { @@ -1194,7 +1193,7 @@ static void scsi_eh_offline_sdevs(struct list_head *work_q, * is woken. In cases where the error code indicates an error that * doesn't require the error handler read (i.e. we don't need to * abort/reset), this function should return SUCCESS. - **/ + */ int scsi_decide_disposition(struct scsi_cmnd *scmd) { int rtn; @@ -1375,7 +1374,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) * * If scsi_allocate_request() fails for what ever reason, we * completely forget to lock the door. - **/ + */ static void scsi_eh_lock_door(struct scsi_device *sdev) { unsigned char cmnd[MAX_COMMAND_SIZE]; @@ -1399,7 +1398,7 @@ static void scsi_eh_lock_door(struct scsi_device *sdev) * Notes: * When we entered the error handler, we blocked all further i/o to * this device. we need to 'reverse' this process. - **/ + */ static void scsi_restart_operations(struct Scsi_Host *shost) { struct scsi_device *sdev; @@ -1445,8 +1444,7 @@ static void scsi_restart_operations(struct Scsi_Host *shost) * @shost: host to be recovered. * @work_q: &list_head for pending commands. * @done_q: &list_head for processed commands. - * - **/ + */ void scsi_eh_ready_devs(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q) @@ -1462,8 +1460,7 @@ EXPORT_SYMBOL_GPL(scsi_eh_ready_devs); /** * scsi_eh_flush_done_q - finish processed commands or retry them. * @done_q: list_head of processed commands. - * - **/ + */ void scsi_eh_flush_done_q(struct list_head *done_q) { struct scsi_cmnd *scmd, *next; @@ -1517,7 +1514,7 @@ EXPORT_SYMBOL(scsi_eh_flush_done_q); * scsi_finish_cmd() called for it. we do all of the retry stuff * here, so when we restart the host after we return it should have an * empty queue. - **/ + */ static void scsi_unjam_host(struct Scsi_Host *shost) { unsigned long flags; @@ -1544,7 +1541,7 @@ static void scsi_unjam_host(struct Scsi_Host *shost) * Notes: * This is the main error handling loop. This is run as a kernel thread * for every SCSI host and handles all error handling activity. - **/ + */ int scsi_error_handler(void *data) { struct Scsi_Host *shost = data; @@ -1773,7 +1770,7 @@ EXPORT_SYMBOL(scsi_reset_provider); * * Return value: * 1 if valid sense data information found, else 0; - **/ + */ int scsi_normalize_sense(const u8 *sense_buffer, int sb_len, struct scsi_sense_hdr *sshdr) { @@ -1839,7 +1836,7 @@ EXPORT_SYMBOL(scsi_command_normalize_sense); * * Return value: * pointer to start of (first) descriptor if found else NULL - **/ + */ const u8 * scsi_sense_desc_find(const u8 * sense_buffer, int sb_len, int desc_type) { @@ -1875,7 +1872,7 @@ EXPORT_SYMBOL(scsi_sense_desc_find); * * Return value: * 1 if information field found, 0 if not found. - **/ + */ int scsi_get_sense_info_fld(const u8 * sense_buffer, int sb_len, u64 * info_out) { diff --git a/drivers/scsi/scsi_transport_srp.c b/drivers/scsi/scsi_transport_srp.c index 739e327bba09..2445c98ae95e 100644 --- a/drivers/scsi/scsi_transport_srp.c +++ b/drivers/scsi/scsi_transport_srp.c @@ -185,11 +185,10 @@ static int srp_host_match(struct attribute_container *cont, struct device *dev) /** * srp_rport_add - add a SRP remote port to the device hierarchy - * * @shost: scsi host the remote port is connected to. * @ids: The port id for the remote port. * - * publishes a port to the rest of the system + * Publishes a port to the rest of the system. */ struct srp_rport *srp_rport_add(struct Scsi_Host *shost, struct srp_rport_identifiers *ids) -- cgit v1.2.3 From 00f5970193e22c48f399a2430635d6416b51befe Mon Sep 17 00:00:00 2001 From: HighPoint Linux Team Date: Thu, 13 Dec 2007 16:14:26 -0800 Subject: [SCSI] hptiop: add more adapter models and other fixes Most code changes were made to support adapters based on Marvell IOP, plus some other fixes. - add more PCI device IDs - support for adapters based on Marvell IOP - fix a result code translation error on big-endian systems - fix resource releasing bug when scsi_host_alloc() fail in hptiop_probe() - update scsi_cmnd.resid when finishing a request - correct some coding style issues [akpm@linux-foundation.org: type fixes] Signed-off-by: HighPoint Linux Team Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- Documentation/scsi/hptiop.txt | 30 ++- drivers/scsi/Kconfig | 4 +- drivers/scsi/hptiop.c | 593 +++++++++++++++++++++++++++++++++--------- drivers/scsi/hptiop.h | 124 ++++++--- 4 files changed, 576 insertions(+), 175 deletions(-) (limited to 'Documentation') diff --git a/Documentation/scsi/hptiop.txt b/Documentation/scsi/hptiop.txt index d28a31247d4c..a6eb4add1be6 100644 --- a/Documentation/scsi/hptiop.txt +++ b/Documentation/scsi/hptiop.txt @@ -1,9 +1,9 @@ -HIGHPOINT ROCKETRAID 3xxx RAID DRIVER (hptiop) +HIGHPOINT ROCKETRAID 3xxx/4xxx ADAPTER DRIVER (hptiop) Controller Register Map ------------------------- -The controller IOP is accessed via PCI BAR0. +For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0: BAR0 offset Register 0x10 Inbound Message Register 0 @@ -18,6 +18,24 @@ The controller IOP is accessed via PCI BAR0. 0x40 Inbound Queue Port 0x44 Outbound Queue Port +For Marvell IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1: + + BAR0 offset Register + 0x20400 Inbound Doorbell Register + 0x20404 Inbound Interrupt Mask Register + 0x20408 Outbound Doorbell Register + 0x2040C Outbound Interrupt Mask Register + + BAR1 offset Register + 0x0 Inbound Queue Head Pointer + 0x4 Inbound Queue Tail Pointer + 0x8 Outbound Queue Head Pointer + 0xC Outbound Queue Tail Pointer + 0x10 Inbound Message Register + 0x14 Outbound Message Register + 0x40-0x1040 Inbound Queue + 0x1040-0x2040 Outbound Queue + I/O Request Workflow ---------------------- @@ -73,15 +91,9 @@ The driver exposes following sysfs attributes: driver-version R driver version string firmware-version R firmware version string -The driver registers char device "hptiop" to communicate with HighPoint RAID -management software. Its ioctl routine acts as a general binary interface -between the IOP firmware and HighPoint RAID management software. New management -functions can be implemented in application/firmware without modification -in driver code. - ----------------------------------------------------------------------------- -Copyright (C) 2006 HighPoint Technologies, Inc. All Rights Reserved. +Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved. This file is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index becbb09d4c9b..e397599d54e3 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -573,10 +573,10 @@ config SCSI_ARCMSR_AER source "drivers/scsi/megaraid/Kconfig.megaraid" config SCSI_HPTIOP - tristate "HighPoint RocketRAID 3xxx Controller support" + tristate "HighPoint RocketRAID 3xxx/4xxx Controller support" depends on SCSI && PCI help - This option enables support for HighPoint RocketRAID 3xxx + This option enables support for HighPoint RocketRAID 3xxx/4xxx controllers. To compile this driver as a module, choose M here; the module diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index 0844331abb87..df1a76438e29 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -1,5 +1,5 @@ /* - * HighPoint RR3xxx controller driver for Linux + * HighPoint RR3xxx/4xxx controller driver for Linux * Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify @@ -38,80 +38,84 @@ #include "hptiop.h" MODULE_AUTHOR("HighPoint Technologies, Inc."); -MODULE_DESCRIPTION("HighPoint RocketRAID 3xxx SATA Controller Driver"); +MODULE_DESCRIPTION("HighPoint RocketRAID 3xxx/4xxx Controller Driver"); static char driver_name[] = "hptiop"; -static const char driver_name_long[] = "RocketRAID 3xxx SATA Controller driver"; -static const char driver_ver[] = "v1.2 (070830)"; - -static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 tag); -static void hptiop_iop_request_callback(struct hptiop_hba *hba, u32 tag); +static const char driver_name_long[] = "RocketRAID 3xxx/4xxx Controller driver"; +static const char driver_ver[] = "v1.3 (071203)"; + +static int iop_send_sync_msg(struct hptiop_hba *hba, u32 msg, u32 millisec); +static void hptiop_finish_scsi_req(struct hptiop_hba *hba, u32 tag, + struct hpt_iop_request_scsi_command *req); +static void hptiop_host_request_callback_itl(struct hptiop_hba *hba, u32 tag); +static void hptiop_iop_request_callback_itl(struct hptiop_hba *hba, u32 tag); static void hptiop_message_callback(struct hptiop_hba *hba, u32 msg); -static inline void hptiop_pci_posting_flush(struct hpt_iopmu __iomem *iop) -{ - readl(&iop->outbound_intstatus); -} - -static int iop_wait_ready(struct hpt_iopmu __iomem *iop, u32 millisec) +static int iop_wait_ready_itl(struct hptiop_hba *hba, u32 millisec) { u32 req = 0; int i; for (i = 0; i < millisec; i++) { - req = readl(&iop->inbound_queue); + req = readl(&hba->u.itl.iop->inbound_queue); if (req != IOPMU_QUEUE_EMPTY) break; msleep(1); } if (req != IOPMU_QUEUE_EMPTY) { - writel(req, &iop->outbound_queue); - hptiop_pci_posting_flush(iop); + writel(req, &hba->u.itl.iop->outbound_queue); + readl(&hba->u.itl.iop->outbound_intstatus); return 0; } return -1; } -static void hptiop_request_callback(struct hptiop_hba *hba, u32 tag) +static int iop_wait_ready_mv(struct hptiop_hba *hba, u32 millisec) +{ + return iop_send_sync_msg(hba, IOPMU_INBOUND_MSG0_NOP, millisec); +} + +static void hptiop_request_callback_itl(struct hptiop_hba *hba, u32 tag) { if (tag & IOPMU_QUEUE_ADDR_HOST_BIT) - return hptiop_host_request_callback(hba, + hptiop_host_request_callback_itl(hba, tag & ~IOPMU_QUEUE_ADDR_HOST_BIT); else - return hptiop_iop_request_callback(hba, tag); + hptiop_iop_request_callback_itl(hba, tag); } -static inline void hptiop_drain_outbound_queue(struct hptiop_hba *hba) +static void hptiop_drain_outbound_queue_itl(struct hptiop_hba *hba) { u32 req; - while ((req = readl(&hba->iop->outbound_queue)) != IOPMU_QUEUE_EMPTY) { + while ((req = readl(&hba->u.itl.iop->outbound_queue)) != + IOPMU_QUEUE_EMPTY) { if (req & IOPMU_QUEUE_MASK_HOST_BITS) - hptiop_request_callback(hba, req); + hptiop_request_callback_itl(hba, req); else { struct hpt_iop_request_header __iomem * p; p = (struct hpt_iop_request_header __iomem *) - ((char __iomem *)hba->iop + req); + ((char __iomem *)hba->u.itl.iop + req); if (readl(&p->flags) & IOP_REQUEST_FLAG_SYNC_REQUEST) { if (readl(&p->context)) - hptiop_request_callback(hba, req); + hptiop_request_callback_itl(hba, req); else writel(1, &p->context); } else - hptiop_request_callback(hba, req); + hptiop_request_callback_itl(hba, req); } } } -static int __iop_intr(struct hptiop_hba *hba) +static int iop_intr_itl(struct hptiop_hba *hba) { - struct hpt_iopmu __iomem *iop = hba->iop; + struct hpt_iopmu_itl __iomem *iop = hba->u.itl.iop; u32 status; int ret = 0; @@ -119,6 +123,7 @@ static int __iop_intr(struct hptiop_hba *hba) if (status & IOPMU_OUTBOUND_INT_MSG0) { u32 msg = readl(&iop->outbound_msgaddr0); + dprintk("received outbound msg %x\n", msg); writel(IOPMU_OUTBOUND_INT_MSG0, &iop->outbound_intstatus); hptiop_message_callback(hba, msg); @@ -126,31 +131,115 @@ static int __iop_intr(struct hptiop_hba *hba) } if (status & IOPMU_OUTBOUND_INT_POSTQUEUE) { - hptiop_drain_outbound_queue(hba); + hptiop_drain_outbound_queue_itl(hba); + ret = 1; + } + + return ret; +} + +static u64 mv_outbound_read(struct hpt_iopmu_mv __iomem *mu) +{ + u32 outbound_tail = readl(&mu->outbound_tail); + u32 outbound_head = readl(&mu->outbound_head); + + if (outbound_tail != outbound_head) { + u64 p; + + memcpy_fromio(&p, &mu->outbound_q[mu->outbound_tail], 8); + outbound_tail++; + + if (outbound_tail == MVIOP_QUEUE_LEN) + outbound_tail = 0; + writel(outbound_tail, &mu->outbound_tail); + return p; + } else + return 0; +} + +static void mv_inbound_write(u64 p, struct hptiop_hba *hba) +{ + u32 inbound_head = readl(&hba->u.mv.mu->inbound_head); + u32 head = inbound_head + 1; + + if (head == MVIOP_QUEUE_LEN) + head = 0; + + memcpy_toio(&hba->u.mv.mu->inbound_q[inbound_head], &p, 8); + writel(head, &hba->u.mv.mu->inbound_head); + writel(MVIOP_MU_INBOUND_INT_POSTQUEUE, + &hba->u.mv.regs->inbound_doorbell); +} + +static void hptiop_request_callback_mv(struct hptiop_hba *hba, u64 tag) +{ + u32 req_type = (tag >> 5) & 0x7; + struct hpt_iop_request_scsi_command *req; + + dprintk("hptiop_request_callback_mv: tag=%llx\n", tag); + + BUG_ON((tag & MVIOP_MU_QUEUE_REQUEST_RETURN_CONTEXT) == 0); + + switch (req_type) { + case IOP_REQUEST_TYPE_GET_CONFIG: + case IOP_REQUEST_TYPE_SET_CONFIG: + hba->msg_done = 1; + break; + + case IOP_REQUEST_TYPE_SCSI_COMMAND: + req = hba->reqs[tag >> 8].req_virt; + if (likely(tag & MVIOP_MU_QUEUE_REQUEST_RESULT_BIT)) + req->header.result = cpu_to_le32(IOP_RESULT_SUCCESS); + + hptiop_finish_scsi_req(hba, tag>>8, req); + break; + + default: + break; + } +} + +static int iop_intr_mv(struct hptiop_hba *hba) +{ + u32 status; + int ret = 0; + + status = readl(&hba->u.mv.regs->outbound_doorbell); + writel(~status, &hba->u.mv.regs->outbound_doorbell); + + if (status & MVIOP_MU_OUTBOUND_INT_MSG) { + u32 msg; + msg = readl(&hba->u.mv.mu->outbound_msg); + dprintk("received outbound msg %x\n", msg); + hptiop_message_callback(hba, msg); + ret = 1; + } + + if (status & MVIOP_MU_OUTBOUND_INT_POSTQUEUE) { + u64 tag; + + while ((tag = mv_outbound_read(hba->u.mv.mu))) + hptiop_request_callback_mv(hba, tag); ret = 1; } return ret; } -static int iop_send_sync_request(struct hptiop_hba *hba, +static int iop_send_sync_request_itl(struct hptiop_hba *hba, void __iomem *_req, u32 millisec) { struct hpt_iop_request_header __iomem *req = _req; u32 i; - writel(readl(&req->flags) | IOP_REQUEST_FLAG_SYNC_REQUEST, - &req->flags); - + writel(readl(&req->flags) | IOP_REQUEST_FLAG_SYNC_REQUEST, &req->flags); writel(0, &req->context); - - writel((unsigned long)req - (unsigned long)hba->iop, - &hba->iop->inbound_queue); - - hptiop_pci_posting_flush(hba->iop); + writel((unsigned long)req - (unsigned long)hba->u.itl.iop, + &hba->u.itl.iop->inbound_queue); + readl(&hba->u.itl.iop->outbound_intstatus); for (i = 0; i < millisec; i++) { - __iop_intr(hba); + iop_intr_itl(hba); if (readl(&req->context)) return 0; msleep(1); @@ -159,19 +248,49 @@ static int iop_send_sync_request(struct hptiop_hba *hba, return -1; } -static int iop_send_sync_msg(struct hptiop_hba *hba, u32 msg, u32 millisec) +static int iop_send_sync_request_mv(struct hptiop_hba *hba, + u32 size_bits, u32 millisec) { + struct hpt_iop_request_header *reqhdr = hba->u.mv.internal_req; u32 i; hba->msg_done = 0; + reqhdr->flags |= cpu_to_le32(IOP_REQUEST_FLAG_SYNC_REQUEST); + mv_inbound_write(hba->u.mv.internal_req_phy | + MVIOP_MU_QUEUE_ADDR_HOST_BIT | size_bits, hba); + + for (i = 0; i < millisec; i++) { + iop_intr_mv(hba); + if (hba->msg_done) + return 0; + msleep(1); + } + return -1; +} + +static void hptiop_post_msg_itl(struct hptiop_hba *hba, u32 msg) +{ + writel(msg, &hba->u.itl.iop->inbound_msgaddr0); + readl(&hba->u.itl.iop->outbound_intstatus); +} + +static void hptiop_post_msg_mv(struct hptiop_hba *hba, u32 msg) +{ + writel(msg, &hba->u.mv.mu->inbound_msg); + writel(MVIOP_MU_INBOUND_INT_MSG, &hba->u.mv.regs->inbound_doorbell); + readl(&hba->u.mv.regs->inbound_doorbell); +} - writel(msg, &hba->iop->inbound_msgaddr0); +static int iop_send_sync_msg(struct hptiop_hba *hba, u32 msg, u32 millisec) +{ + u32 i; - hptiop_pci_posting_flush(hba->iop); + hba->msg_done = 0; + hba->ops->post_msg(hba, msg); for (i = 0; i < millisec; i++) { spin_lock_irq(hba->host->host_lock); - __iop_intr(hba); + hba->ops->iop_intr(hba); spin_unlock_irq(hba->host->host_lock); if (hba->msg_done) break; @@ -181,46 +300,67 @@ static int iop_send_sync_msg(struct hptiop_hba *hba, u32 msg, u32 millisec) return hba->msg_done? 0 : -1; } -static int iop_get_config(struct hptiop_hba *hba, +static int iop_get_config_itl(struct hptiop_hba *hba, struct hpt_iop_request_get_config *config) { u32 req32; struct hpt_iop_request_get_config __iomem *req; - req32 = readl(&hba->iop->inbound_queue); + req32 = readl(&hba->u.itl.iop->inbound_queue); if (req32 == IOPMU_QUEUE_EMPTY) return -1; req = (struct hpt_iop_request_get_config __iomem *) - ((unsigned long)hba->iop + req32); + ((unsigned long)hba->u.itl.iop + req32); writel(0, &req->header.flags); writel(IOP_REQUEST_TYPE_GET_CONFIG, &req->header.type); writel(sizeof(struct hpt_iop_request_get_config), &req->header.size); writel(IOP_RESULT_PENDING, &req->header.result); - if (iop_send_sync_request(hba, req, 20000)) { + if (iop_send_sync_request_itl(hba, req, 20000)) { dprintk("Get config send cmd failed\n"); return -1; } memcpy_fromio(config, req, sizeof(*config)); - writel(req32, &hba->iop->outbound_queue); + writel(req32, &hba->u.itl.iop->outbound_queue); + return 0; +} + +static int iop_get_config_mv(struct hptiop_hba *hba, + struct hpt_iop_request_get_config *config) +{ + struct hpt_iop_request_get_config *req = hba->u.mv.internal_req; + + req->header.flags = cpu_to_le32(IOP_REQUEST_FLAG_OUTPUT_CONTEXT); + req->header.type = cpu_to_le32(IOP_REQUEST_TYPE_GET_CONFIG); + req->header.size = + cpu_to_le32(sizeof(struct hpt_iop_request_get_config)); + req->header.result = cpu_to_le32(IOP_RESULT_PENDING); + req->header.context = cpu_to_le64(IOP_REQUEST_TYPE_GET_CONFIG<<5); + + if (iop_send_sync_request_mv(hba, 0, 20000)) { + dprintk("Get config send cmd failed\n"); + return -1; + } + + memcpy(config, req, sizeof(struct hpt_iop_request_get_config)); return 0; } -static int iop_set_config(struct hptiop_hba *hba, +static int iop_set_config_itl(struct hptiop_hba *hba, struct hpt_iop_request_set_config *config) { u32 req32; struct hpt_iop_request_set_config __iomem *req; - req32 = readl(&hba->iop->inbound_queue); + req32 = readl(&hba->u.itl.iop->inbound_queue); if (req32 == IOPMU_QUEUE_EMPTY) return -1; req = (struct hpt_iop_request_set_config __iomem *) - ((unsigned long)hba->iop + req32); + ((unsigned long)hba->u.itl.iop + req32); memcpy_toio((u8 __iomem *)req + sizeof(struct hpt_iop_request_header), (u8 *)config + sizeof(struct hpt_iop_request_header), @@ -232,22 +372,52 @@ static int iop_set_config(struct hptiop_hba *hba, writel(sizeof(struct hpt_iop_request_set_config), &req->header.size); writel(IOP_RESULT_PENDING, &req->header.result); - if (iop_send_sync_request(hba, req, 20000)) { + if (iop_send_sync_request_itl(hba, req, 20000)) { dprintk("Set config send cmd failed\n"); return -1; } - writel(req32, &hba->iop->outbound_queue); + writel(req32, &hba->u.itl.iop->outbound_queue); return 0; } -static int hptiop_initialize_iop(struct hptiop_hba *hba) +static int iop_set_config_mv(struct hptiop_hba *hba, + struct hpt_iop_request_set_config *config) { - struct hpt_iopmu __iomem *iop = hba->iop; + struct hpt_iop_request_set_config *req = hba->u.mv.internal_req; - /* enable interrupts */ + memcpy(req, config, sizeof(struct hpt_iop_request_set_config)); + req->header.flags = cpu_to_le32(IOP_REQUEST_FLAG_OUTPUT_CONTEXT); + req->header.type = cpu_to_le32(IOP_REQUEST_TYPE_SET_CONFIG); + req->header.size = + cpu_to_le32(sizeof(struct hpt_iop_request_set_config)); + req->header.result = cpu_to_le32(IOP_RESULT_PENDING); + req->header.context = cpu_to_le64(IOP_REQUEST_TYPE_SET_CONFIG<<5); + + if (iop_send_sync_request_mv(hba, 0, 20000)) { + dprintk("Set config send cmd failed\n"); + return -1; + } + + return 0; +} + +static void hptiop_enable_intr_itl(struct hptiop_hba *hba) +{ writel(~(IOPMU_OUTBOUND_INT_POSTQUEUE | IOPMU_OUTBOUND_INT_MSG0), - &iop->outbound_intmask); + &hba->u.itl.iop->outbound_intmask); +} + +static void hptiop_enable_intr_mv(struct hptiop_hba *hba) +{ + writel(MVIOP_MU_OUTBOUND_INT_POSTQUEUE | MVIOP_MU_OUTBOUND_INT_MSG, + &hba->u.mv.regs->outbound_intmask); +} + +static int hptiop_initialize_iop(struct hptiop_hba *hba) +{ + /* enable interrupts */ + hba->ops->enable_intr(hba); hba->initialized = 1; @@ -261,37 +431,74 @@ static int hptiop_initialize_iop(struct hptiop_hba *hba) return 0; } -static int hptiop_map_pci_bar(struct hptiop_hba *hba) +static void __iomem *hptiop_map_pci_bar(struct hptiop_hba *hba, int index) { u32 mem_base_phy, length; void __iomem *mem_base_virt; + struct pci_dev *pcidev = hba->pcidev; - if (!(pci_resource_flags(pcidev, 0) & IORESOURCE_MEM)) { + + if (!(pci_resource_flags(pcidev, index) & IORESOURCE_MEM)) { printk(KERN_ERR "scsi%d: pci resource invalid\n", hba->host->host_no); - return -1; + return 0; } - mem_base_phy = pci_resource_start(pcidev, 0); - length = pci_resource_len(pcidev, 0); + mem_base_phy = pci_resource_start(pcidev, index); + length = pci_resource_len(pcidev, index); mem_base_virt = ioremap(mem_base_phy, length); if (!mem_base_virt) { printk(KERN_ERR "scsi%d: Fail to ioremap memory space\n", hba->host->host_no); + return 0; + } + return mem_base_virt; +} + +static int hptiop_map_pci_bar_itl(struct hptiop_hba *hba) +{ + hba->u.itl.iop = hptiop_map_pci_bar(hba, 0); + if (hba->u.itl.iop) + return 0; + else + return -1; +} + +static void hptiop_unmap_pci_bar_itl(struct hptiop_hba *hba) +{ + iounmap(hba->u.itl.iop); +} + +static int hptiop_map_pci_bar_mv(struct hptiop_hba *hba) +{ + hba->u.mv.regs = hptiop_map_pci_bar(hba, 0); + if (hba->u.mv.regs == 0) + return -1; + + hba->u.mv.mu = hptiop_map_pci_bar(hba, 2); + if (hba->u.mv.mu == 0) { + iounmap(hba->u.mv.regs); return -1; } - hba->iop = mem_base_virt; - dprintk("hptiop_map_pci_bar: iop=%p\n", hba->iop); return 0; } +static void hptiop_unmap_pci_bar_mv(struct hptiop_hba *hba) +{ + iounmap(hba->u.mv.regs); + iounmap(hba->u.mv.mu); +} + static void hptiop_message_callback(struct hptiop_hba *hba, u32 msg) { dprintk("iop message 0x%x\n", msg); + if (msg == IOPMU_INBOUND_MSG0_NOP) + hba->msg_done = 1; + if (!hba->initialized) return; @@ -303,7 +510,7 @@ static void hptiop_message_callback(struct hptiop_hba *hba, u32 msg) hba->msg_done = 1; } -static inline struct hptiop_request *get_req(struct hptiop_hba *hba) +static struct hptiop_request *get_req(struct hptiop_hba *hba) { struct hptiop_request *ret; @@ -316,30 +523,19 @@ static inline struct hptiop_request *get_req(struct hptiop_hba *hba) return ret; } -static inline void free_req(struct hptiop_hba *hba, struct hptiop_request *req) +static void free_req(struct hptiop_hba *hba, struct hptiop_request *req) { dprintk("free_req(%d, %p)\n", req->index, req); req->next = hba->req_list; hba->req_list = req; } -static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 _tag) +static void hptiop_finish_scsi_req(struct hptiop_hba *hba, u32 tag, + struct hpt_iop_request_scsi_command *req) { - struct hpt_iop_request_scsi_command *req; struct scsi_cmnd *scp; - u32 tag; - - if (hba->iopintf_v2) { - tag = _tag & ~ IOPMU_QUEUE_REQUEST_RESULT_BIT; - req = hba->reqs[tag].req_virt; - if (likely(_tag & IOPMU_QUEUE_REQUEST_RESULT_BIT)) - req->header.result = IOP_RESULT_SUCCESS; - } else { - tag = _tag; - req = hba->reqs[tag].req_virt; - } - dprintk("hptiop_host_request_callback: req=%p, type=%d, " + dprintk("hptiop_finish_scsi_req: req=%p, type=%d, " "result=%d, context=0x%x tag=%d\n", req, req->header.type, req->header.result, req->header.context, tag); @@ -354,6 +550,8 @@ static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 _tag) switch (le32_to_cpu(req->header.result)) { case IOP_RESULT_SUCCESS: + scsi_set_resid(scp, + scsi_bufflen(scp) - le32_to_cpu(req->dataxfer_length)); scp->result = (DID_OK<<16); break; case IOP_RESULT_BAD_TARGET: @@ -371,12 +569,12 @@ static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 _tag) case IOP_RESULT_INVALID_REQUEST: scp->result = (DID_ABORT<<16); break; - case IOP_RESULT_MODE_SENSE_CHECK_CONDITION: + case IOP_RESULT_CHECK_CONDITION: + scsi_set_resid(scp, + scsi_bufflen(scp) - le32_to_cpu(req->dataxfer_length)); scp->result = SAM_STAT_CHECK_CONDITION; - memset(&scp->sense_buffer, - 0, sizeof(scp->sense_buffer)); memcpy(&scp->sense_buffer, &req->sg_list, - min(sizeof(scp->sense_buffer), + min_t(size_t, sizeof(scp->sense_buffer), le32_to_cpu(req->dataxfer_length))); break; @@ -391,15 +589,33 @@ static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 _tag) free_req(hba, &hba->reqs[tag]); } -void hptiop_iop_request_callback(struct hptiop_hba *hba, u32 tag) +static void hptiop_host_request_callback_itl(struct hptiop_hba *hba, u32 _tag) +{ + struct hpt_iop_request_scsi_command *req; + u32 tag; + + if (hba->iopintf_v2) { + tag = _tag & ~IOPMU_QUEUE_REQUEST_RESULT_BIT; + req = hba->reqs[tag].req_virt; + if (likely(_tag & IOPMU_QUEUE_REQUEST_RESULT_BIT)) + req->header.result = cpu_to_le32(IOP_RESULT_SUCCESS); + } else { + tag = _tag; + req = hba->reqs[tag].req_virt; + } + + hptiop_finish_scsi_req(hba, tag, req); +} + +void hptiop_iop_request_callback_itl(struct hptiop_hba *hba, u32 tag) { struct hpt_iop_request_header __iomem *req; struct hpt_iop_request_ioctl_command __iomem *p; struct hpt_ioctl_k *arg; req = (struct hpt_iop_request_header __iomem *) - ((unsigned long)hba->iop + tag); - dprintk("hptiop_iop_request_callback: req=%p, type=%d, " + ((unsigned long)hba->u.itl.iop + tag); + dprintk("hptiop_iop_request_callback_itl: req=%p, type=%d, " "result=%d, context=0x%x tag=%d\n", req, readl(&req->type), readl(&req->result), readl(&req->context), tag); @@ -427,7 +643,7 @@ void hptiop_iop_request_callback(struct hptiop_hba *hba, u32 tag) arg->result = HPT_IOCTL_RESULT_FAILED; arg->done(arg); - writel(tag, &hba->iop->outbound_queue); + writel(tag, &hba->u.itl.iop->outbound_queue); } static irqreturn_t hptiop_intr(int irq, void *dev_id) @@ -437,7 +653,7 @@ static irqreturn_t hptiop_intr(int irq, void *dev_id) unsigned long flags; spin_lock_irqsave(hba->host->host_lock, flags); - handled = __iop_intr(hba); + handled = hba->ops->iop_intr(hba); spin_unlock_irqrestore(hba->host->host_lock, flags); return handled; @@ -469,6 +685,57 @@ static int hptiop_buildsgl(struct scsi_cmnd *scp, struct hpt_iopsg *psg) return HPT_SCP(scp)->sgcnt; } +static void hptiop_post_req_itl(struct hptiop_hba *hba, + struct hptiop_request *_req) +{ + struct hpt_iop_request_header *reqhdr = _req->req_virt; + + reqhdr->context = cpu_to_le32(IOPMU_QUEUE_ADDR_HOST_BIT | + (u32)_req->index); + reqhdr->context_hi32 = 0; + + if (hba->iopintf_v2) { + u32 size, size_bits; + + size = le32_to_cpu(reqhdr->size); + if (size < 256) + size_bits = IOPMU_QUEUE_REQUEST_SIZE_BIT; + else if (size < 512) + size_bits = IOPMU_QUEUE_ADDR_HOST_BIT; + else + size_bits = IOPMU_QUEUE_REQUEST_SIZE_BIT | + IOPMU_QUEUE_ADDR_HOST_BIT; + writel(_req->req_shifted_phy | size_bits, + &hba->u.itl.iop->inbound_queue); + } else + writel(_req->req_shifted_phy | IOPMU_QUEUE_ADDR_HOST_BIT, + &hba->u.itl.iop->inbound_queue); +} + +static void hptiop_post_req_mv(struct hptiop_hba *hba, + struct hptiop_request *_req) +{ + struct hpt_iop_request_header *reqhdr = _req->req_virt; + u32 size, size_bit; + + reqhdr->context = cpu_to_le32(_req->index<<8 | + IOP_REQUEST_TYPE_SCSI_COMMAND<<5); + reqhdr->context_hi32 = 0; + size = le32_to_cpu(reqhdr->size); + + if (size <= 256) + size_bit = 0; + else if (size <= 256*2) + size_bit = 1; + else if (size <= 256*3) + size_bit = 2; + else + size_bit = 3; + + mv_inbound_write((_req->req_shifted_phy << 5) | + MVIOP_MU_QUEUE_ADDR_HOST_BIT | size_bit, hba); +} + static int hptiop_queuecommand(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *)) { @@ -518,9 +785,6 @@ static int hptiop_queuecommand(struct scsi_cmnd *scp, req->header.flags = cpu_to_le32(IOP_REQUEST_FLAG_OUTPUT_CONTEXT); req->header.type = cpu_to_le32(IOP_REQUEST_TYPE_SCSI_COMMAND); req->header.result = cpu_to_le32(IOP_RESULT_PENDING); - req->header.context = cpu_to_le32(IOPMU_QUEUE_ADDR_HOST_BIT | - (u32)_req->index); - req->header.context_hi32 = 0; req->dataxfer_length = cpu_to_le32(scsi_bufflen(scp)); req->channel = scp->device->channel; req->target = scp->device->id; @@ -531,21 +795,7 @@ static int hptiop_queuecommand(struct scsi_cmnd *scp, + sg_count * sizeof(struct hpt_iopsg)); memcpy(req->cdb, scp->cmnd, sizeof(req->cdb)); - - if (hba->iopintf_v2) { - u32 size_bits; - if (req->header.size < 256) - size_bits = IOPMU_QUEUE_REQUEST_SIZE_BIT; - else if (req->header.size < 512) - size_bits = IOPMU_QUEUE_ADDR_HOST_BIT; - else - size_bits = IOPMU_QUEUE_REQUEST_SIZE_BIT | - IOPMU_QUEUE_ADDR_HOST_BIT; - writel(_req->req_shifted_phy | size_bits, &hba->iop->inbound_queue); - } else - writel(_req->req_shifted_phy | IOPMU_QUEUE_ADDR_HOST_BIT, - &hba->iop->inbound_queue); - + hba->ops->post_req(hba, _req); return 0; cmd_done: @@ -563,9 +813,7 @@ static int hptiop_reset_hba(struct hptiop_hba *hba) { if (atomic_xchg(&hba->resetting, 1) == 0) { atomic_inc(&hba->reset_count); - writel(IOPMU_INBOUND_MSG0_RESET, - &hba->iop->inbound_msgaddr0); - hptiop_pci_posting_flush(hba->iop); + hba->ops->post_msg(hba, IOPMU_INBOUND_MSG0_RESET); } wait_event_timeout(hba->reset_wq, @@ -601,8 +849,10 @@ static int hptiop_reset(struct scsi_cmnd *scp) static int hptiop_adjust_disk_queue_depth(struct scsi_device *sdev, int queue_depth) { - if(queue_depth > 256) - queue_depth = 256; + struct hptiop_hba *hba = (struct hptiop_hba *)sdev->host->hostdata; + + if (queue_depth > hba->max_requests) + queue_depth = hba->max_requests; scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth); return queue_depth; } @@ -663,6 +913,26 @@ static struct scsi_host_template driver_template = { .change_queue_depth = hptiop_adjust_disk_queue_depth, }; +static int hptiop_internal_memalloc_mv(struct hptiop_hba *hba) +{ + hba->u.mv.internal_req = dma_alloc_coherent(&hba->pcidev->dev, + 0x800, &hba->u.mv.internal_req_phy, GFP_KERNEL); + if (hba->u.mv.internal_req) + return 0; + else + return -1; +} + +static int hptiop_internal_memfree_mv(struct hptiop_hba *hba) +{ + if (hba->u.mv.internal_req) { + dma_free_coherent(&hba->pcidev->dev, 0x800, + hba->u.mv.internal_req, hba->u.mv.internal_req_phy); + return 0; + } else + return -1; +} + static int __devinit hptiop_probe(struct pci_dev *pcidev, const struct pci_device_id *id) { @@ -708,6 +978,7 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev, hba = (struct hptiop_hba *)host->hostdata; + hba->ops = (struct hptiop_adapter_ops *)id->driver_data; hba->pcidev = pcidev; hba->host = host; hba->initialized = 0; @@ -725,16 +996,24 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev, host->n_io_port = 0; host->irq = pcidev->irq; - if (hptiop_map_pci_bar(hba)) + if (hba->ops->map_pci_bar(hba)) goto free_scsi_host; - if (iop_wait_ready(hba->iop, 20000)) { + if (hba->ops->iop_wait_ready(hba, 20000)) { printk(KERN_ERR "scsi%d: firmware not ready\n", hba->host->host_no); goto unmap_pci_bar; } - if (iop_get_config(hba, &iop_config)) { + if (hba->ops->internal_memalloc) { + if (hba->ops->internal_memalloc(hba)) { + printk(KERN_ERR "scsi%d: internal_memalloc failed\n", + hba->host->host_no); + goto unmap_pci_bar; + } + } + + if (hba->ops->get_config(hba, &iop_config)) { printk(KERN_ERR "scsi%d: get config failed\n", hba->host->host_no); goto unmap_pci_bar; @@ -770,7 +1049,7 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev, set_config.vbus_id = cpu_to_le16(host->host_no); set_config.max_host_request_size = cpu_to_le16(req_size); - if (iop_set_config(hba, &set_config)) { + if (hba->ops->set_config(hba, &set_config)) { printk(KERN_ERR "scsi%d: set config failed\n", hba->host->host_no); goto unmap_pci_bar; @@ -839,21 +1118,24 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev, free_request_mem: dma_free_coherent(&hba->pcidev->dev, - hba->req_size*hba->max_requests + 0x20, + hba->req_size * hba->max_requests + 0x20, hba->dma_coherent, hba->dma_coherent_handle); free_request_irq: free_irq(hba->pcidev->irq, hba); unmap_pci_bar: - iounmap(hba->iop); + if (hba->ops->internal_memfree) + hba->ops->internal_memfree(hba); -free_pci_regions: - pci_release_regions(pcidev) ; + hba->ops->unmap_pci_bar(hba); free_scsi_host: scsi_host_put(host); +free_pci_regions: + pci_release_regions(pcidev); + disable_pci_device: pci_disable_device(pcidev); @@ -865,8 +1147,6 @@ static void hptiop_shutdown(struct pci_dev *pcidev) { struct Scsi_Host *host = pci_get_drvdata(pcidev); struct hptiop_hba *hba = (struct hptiop_hba *)host->hostdata; - struct hpt_iopmu __iomem *iop = hba->iop; - u32 int_mask; dprintk("hptiop_shutdown(%p)\n", hba); @@ -876,11 +1156,24 @@ static void hptiop_shutdown(struct pci_dev *pcidev) hba->host->host_no); /* disable all outbound interrupts */ - int_mask = readl(&iop->outbound_intmask); + hba->ops->disable_intr(hba); +} + +static void hptiop_disable_intr_itl(struct hptiop_hba *hba) +{ + u32 int_mask; + + int_mask = readl(&hba->u.itl.iop->outbound_intmask); writel(int_mask | IOPMU_OUTBOUND_INT_MSG0 | IOPMU_OUTBOUND_INT_POSTQUEUE, - &iop->outbound_intmask); - hptiop_pci_posting_flush(iop); + &hba->u.itl.iop->outbound_intmask); + readl(&hba->u.itl.iop->outbound_intmask); +} + +static void hptiop_disable_intr_mv(struct hptiop_hba *hba) +{ + writel(0, &hba->u.mv.regs->outbound_intmask); + readl(&hba->u.mv.regs->outbound_intmask); } static void hptiop_remove(struct pci_dev *pcidev) @@ -901,7 +1194,10 @@ static void hptiop_remove(struct pci_dev *pcidev) hba->dma_coherent, hba->dma_coherent_handle); - iounmap(hba->iop); + if (hba->ops->internal_memfree) + hba->ops->internal_memfree(hba); + + hba->ops->unmap_pci_bar(hba); pci_release_regions(hba->pcidev); pci_set_drvdata(hba->pcidev, NULL); @@ -910,11 +1206,50 @@ static void hptiop_remove(struct pci_dev *pcidev) scsi_host_put(host); } +static struct hptiop_adapter_ops hptiop_itl_ops = { + .iop_wait_ready = iop_wait_ready_itl, + .internal_memalloc = 0, + .internal_memfree = 0, + .map_pci_bar = hptiop_map_pci_bar_itl, + .unmap_pci_bar = hptiop_unmap_pci_bar_itl, + .enable_intr = hptiop_enable_intr_itl, + .disable_intr = hptiop_disable_intr_itl, + .get_config = iop_get_config_itl, + .set_config = iop_set_config_itl, + .iop_intr = iop_intr_itl, + .post_msg = hptiop_post_msg_itl, + .post_req = hptiop_post_req_itl, +}; + +static struct hptiop_adapter_ops hptiop_mv_ops = { + .iop_wait_ready = iop_wait_ready_mv, + .internal_memalloc = hptiop_internal_memalloc_mv, + .internal_memfree = hptiop_internal_memfree_mv, + .map_pci_bar = hptiop_map_pci_bar_mv, + .unmap_pci_bar = hptiop_unmap_pci_bar_mv, + .enable_intr = hptiop_enable_intr_mv, + .disable_intr = hptiop_disable_intr_mv, + .get_config = iop_get_config_mv, + .set_config = iop_set_config_mv, + .iop_intr = iop_intr_mv, + .post_msg = hptiop_post_msg_mv, + .post_req = hptiop_post_req_mv, +}; + static struct pci_device_id hptiop_id_table[] = { - { PCI_VDEVICE(TTI, 0x3220) }, - { PCI_VDEVICE(TTI, 0x3320) }, - { PCI_VDEVICE(TTI, 0x3520) }, - { PCI_VDEVICE(TTI, 0x4320) }, + { PCI_VDEVICE(TTI, 0x3220), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3320), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3520), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x4320), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3510), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3511), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3521), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3522), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3410), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3540), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3120), (kernel_ulong_t)&hptiop_mv_ops }, + { PCI_VDEVICE(TTI, 0x3122), (kernel_ulong_t)&hptiop_mv_ops }, + { PCI_VDEVICE(TTI, 0x3020), (kernel_ulong_t)&hptiop_mv_ops }, {}, }; diff --git a/drivers/scsi/hptiop.h b/drivers/scsi/hptiop.h index 2a5e46e001cb..a0289f219752 100644 --- a/drivers/scsi/hptiop.h +++ b/drivers/scsi/hptiop.h @@ -1,5 +1,5 @@ /* - * HighPoint RR3xxx controller driver for Linux + * HighPoint RR3xxx/4xxx controller driver for Linux * Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify @@ -18,8 +18,7 @@ #ifndef _HPTIOP_H_ #define _HPTIOP_H_ -struct hpt_iopmu -{ +struct hpt_iopmu_itl { __le32 resrved0[4]; __le32 inbound_msgaddr0; __le32 inbound_msgaddr1; @@ -54,6 +53,40 @@ struct hpt_iopmu #define IOPMU_INBOUND_INT_ERROR 8 #define IOPMU_INBOUND_INT_POSTQUEUE 0x10 +#define MVIOP_QUEUE_LEN 512 + +struct hpt_iopmu_mv { + __le32 inbound_head; + __le32 inbound_tail; + __le32 outbound_head; + __le32 outbound_tail; + __le32 inbound_msg; + __le32 outbound_msg; + __le32 reserve[10]; + __le64 inbound_q[MVIOP_QUEUE_LEN]; + __le64 outbound_q[MVIOP_QUEUE_LEN]; +}; + +struct hpt_iopmv_regs { + __le32 reserved[0x20400 / 4]; + __le32 inbound_doorbell; + __le32 inbound_intmask; + __le32 outbound_doorbell; + __le32 outbound_intmask; +}; + +#define MVIOP_MU_QUEUE_ADDR_HOST_MASK (~(0x1full)) +#define MVIOP_MU_QUEUE_ADDR_HOST_BIT 4 + +#define MVIOP_MU_QUEUE_ADDR_IOP_HIGH32 0xffffffff +#define MVIOP_MU_QUEUE_REQUEST_RESULT_BIT 1 +#define MVIOP_MU_QUEUE_REQUEST_RETURN_CONTEXT 2 + +#define MVIOP_MU_INBOUND_INT_MSG 1 +#define MVIOP_MU_INBOUND_INT_POSTQUEUE 2 +#define MVIOP_MU_OUTBOUND_INT_MSG 1 +#define MVIOP_MU_OUTBOUND_INT_POSTQUEUE 2 + enum hpt_iopmu_message { /* host-to-iop messages */ IOPMU_INBOUND_MSG0_NOP = 0, @@ -72,8 +105,7 @@ enum hpt_iopmu_message { IOPMU_OUTBOUND_MSG0_REVALIDATE_DEVICE_MAX = 0x3ff, }; -struct hpt_iop_request_header -{ +struct hpt_iop_request_header { __le32 size; __le32 type; __le32 flags; @@ -104,11 +136,10 @@ enum hpt_iop_result_type { IOP_RESULT_RESET, IOP_RESULT_INVALID_REQUEST, IOP_RESULT_BAD_TARGET, - IOP_RESULT_MODE_SENSE_CHECK_CONDITION, + IOP_RESULT_CHECK_CONDITION, }; -struct hpt_iop_request_get_config -{ +struct hpt_iop_request_get_config { struct hpt_iop_request_header header; __le32 interface_version; __le32 firmware_version; @@ -121,8 +152,7 @@ struct hpt_iop_request_get_config __le32 sdram_size; }; -struct hpt_iop_request_set_config -{ +struct hpt_iop_request_set_config { struct hpt_iop_request_header header; __le32 iop_id; __le16 vbus_id; @@ -130,15 +160,13 @@ struct hpt_iop_request_set_config __le32 reserve[6]; }; -struct hpt_iopsg -{ +struct hpt_iopsg { __le32 size; __le32 eot; /* non-zero: end of table */ __le64 pci_address; }; -struct hpt_iop_request_block_command -{ +struct hpt_iop_request_block_command { struct hpt_iop_request_header header; u8 channel; u8 target; @@ -156,8 +184,7 @@ struct hpt_iop_request_block_command #define IOP_BLOCK_COMMAND_FLUSH 4 #define IOP_BLOCK_COMMAND_SHUTDOWN 5 -struct hpt_iop_request_scsi_command -{ +struct hpt_iop_request_scsi_command { struct hpt_iop_request_header header; u8 channel; u8 target; @@ -168,8 +195,7 @@ struct hpt_iop_request_scsi_command struct hpt_iopsg sg_list[1]; }; -struct hpt_iop_request_ioctl_command -{ +struct hpt_iop_request_ioctl_command { struct hpt_iop_request_header header; __le32 ioctl_code; __le32 inbuf_size; @@ -182,11 +208,11 @@ struct hpt_iop_request_ioctl_command #define HPTIOP_MAX_REQUESTS 256u struct hptiop_request { - struct hptiop_request * next; - void * req_virt; - u32 req_shifted_phy; - struct scsi_cmnd * scp; - int index; + struct hptiop_request *next; + void *req_virt; + u32 req_shifted_phy; + struct scsi_cmnd *scp; + int index; }; struct hpt_scsi_pointer { @@ -198,9 +224,21 @@ struct hpt_scsi_pointer { #define HPT_SCP(scp) ((struct hpt_scsi_pointer *)&(scp)->SCp) struct hptiop_hba { - struct hpt_iopmu __iomem * iop; - struct Scsi_Host * host; - struct pci_dev * pcidev; + struct hptiop_adapter_ops *ops; + union { + struct { + struct hpt_iopmu_itl __iomem *iop; + } itl; + struct { + struct hpt_iopmv_regs *regs; + struct hpt_iopmu_mv __iomem *mu; + void *internal_req; + dma_addr_t internal_req_phy; + } mv; + } u; + + struct Scsi_Host *host; + struct pci_dev *pcidev; /* IOP config info */ u32 interface_version; @@ -213,15 +251,15 @@ struct hptiop_hba { u32 req_size; /* host-allocated request buffer size */ - int iopintf_v2: 1; - int initialized: 1; - int msg_done: 1; + u32 iopintf_v2: 1; + u32 initialized: 1; + u32 msg_done: 1; struct hptiop_request * req_list; struct hptiop_request reqs[HPTIOP_MAX_REQUESTS]; /* used to free allocated dma area */ - void * dma_coherent; + void *dma_coherent; dma_addr_t dma_coherent_handle; atomic_t reset_count; @@ -231,19 +269,35 @@ struct hptiop_hba { wait_queue_head_t ioctl_wq; }; -struct hpt_ioctl_k -{ +struct hpt_ioctl_k { struct hptiop_hba * hba; u32 ioctl_code; u32 inbuf_size; u32 outbuf_size; - void * inbuf; - void * outbuf; - u32 * bytes_returned; + void *inbuf; + void *outbuf; + u32 *bytes_returned; void (*done)(struct hpt_ioctl_k *); int result; /* HPT_IOCTL_RESULT_ */ }; +struct hptiop_adapter_ops { + int (*iop_wait_ready)(struct hptiop_hba *hba, u32 millisec); + int (*internal_memalloc)(struct hptiop_hba *hba); + int (*internal_memfree)(struct hptiop_hba *hba); + int (*map_pci_bar)(struct hptiop_hba *hba); + void (*unmap_pci_bar)(struct hptiop_hba *hba); + void (*enable_intr)(struct hptiop_hba *hba); + void (*disable_intr)(struct hptiop_hba *hba); + int (*get_config)(struct hptiop_hba *hba, + struct hpt_iop_request_get_config *config); + int (*set_config)(struct hptiop_hba *hba, + struct hpt_iop_request_set_config *config); + int (*iop_intr)(struct hptiop_hba *hba); + void (*post_msg)(struct hptiop_hba *hba, u32 msg); + void (*post_req)(struct hptiop_hba *hba, struct hptiop_request *_req); +}; + #define HPT_IOCTL_RESULT_OK 0 #define HPT_IOCTL_RESULT_FAILED (-1) -- cgit v1.2.3 From cb1042f285c2168bd8cf10aca0e24802e682252b Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Thu, 17 Jan 2008 09:25:07 -0800 Subject: [SCSI] aacraid: add Voodoo Lite class of cards. The cards being added are supported in a limited sense already through family matching, but we needed to add some functionality to the driver to expose selectively the physical drives. These Physical drives are specifically marked to not be part of any array and thus are declared JBODs (Just a Bunch Of Drives) for generic SCSI access. We report that this is the second patch in a set of two, but merely depends on the stand-alone functionality of the first patch which adds in that case the ability to report a driver feature flag via sysfs. We leverage that functionality by reporting that this driver now supports this new JBOD feature for the controller so that the array management applications may react accordingly and guide the user as they manage the controller. Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- Documentation/scsi/aacraid.txt | 4 ++++ drivers/scsi/aacraid/aachba.c | 5 ++++- drivers/scsi/aacraid/aacraid.h | 6 +++++- drivers/scsi/aacraid/commsup.c | 24 ++++++++++++++++++++++++ drivers/scsi/aacraid/linit.c | 15 +++++++++++---- 5 files changed, 48 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/scsi/aacraid.txt b/Documentation/scsi/aacraid.txt index a8257840695a..d16011a8618e 100644 --- a/Documentation/scsi/aacraid.txt +++ b/Documentation/scsi/aacraid.txt @@ -56,6 +56,10 @@ Supported Cards/Chipsets 9005:0285:9005:02d1 Adaptec 5405 (Voodoo40) 9005:0285:15d9:02d2 SMC AOC-USAS-S8i-LP 9005:0285:15d9:02d3 SMC AOC-USAS-S8iR-LP + 9005:0285:9005:02d4 Adaptec 2045 (Voodoo04 Lite) + 9005:0285:9005:02d5 Adaptec 2405 (Voodoo40 Lite) + 9005:0285:9005:02d6 Adaptec 2445 (Voodoo44 Lite) + 9005:0285:9005:02d7 Adaptec 2805 (Voodoo80 Lite) 1011:0046:9005:0364 Adaptec 5400S (Mustang) 9005:0287:9005:0800 Adaptec Themisto (Jupiter) 9005:0200:9005:0200 Adaptec Themisto (Jupiter) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 8d7b7703ee2a..d7235f42cf5f 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -1339,6 +1339,8 @@ int aac_get_adapter_info(struct aac_dev* dev) } dev->cache_protected = 0; + dev->jbod = ((dev->supplement_adapter_info.FeatureBits & + AAC_FEATURE_JBOD) != 0); dev->nondasd_support = 0; dev->raid_scsi_mode = 0; if(dev->adapter_info.options & AAC_OPT_NONDASD) @@ -1923,7 +1925,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) } } } else { /* check for physical non-dasd devices */ - if ((dev->nondasd_support == 1) || expose_physicals) { + if (dev->nondasd_support || expose_physicals || + dev->jbod) { if (dev->in_reset) return -1; return aac_send_srb_fib(scsicmd); diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 8a5b9c898e5b..3195d29f2177 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -12,7 +12,7 @@ *----------------------------------------------------------------------------*/ #ifndef AAC_DRIVER_BUILD -# define AAC_DRIVER_BUILD 2454 +# define AAC_DRIVER_BUILD 2455 # define AAC_DRIVER_BRANCH "-ms" #endif #define MAXIMUM_NUM_CONTAINERS 32 @@ -866,6 +866,7 @@ struct aac_supplement_adapter_info __le32 ReservedGrowth[1]; }; #define AAC_FEATURE_FALCON cpu_to_le32(0x00000010) +#define AAC_FEATURE_JBOD cpu_to_le32(0x08000000) #define AAC_OPTION_MU_RESET cpu_to_le32(0x00000001) #define AAC_OPTION_IGNORE_RESET cpu_to_le32(0x00000002) #define AAC_SIS_VERSION_V3 3 @@ -1012,6 +1013,7 @@ struct aac_dev * lets break them out so we don't have to do an AND to check them */ u8 nondasd_support; + u8 jbod; u8 cache_protected; u8 dac_support; u8 raid_scsi_mode; @@ -1777,6 +1779,8 @@ extern struct aac_common aac_config; #define AifEnExpEvent 23 /* Firmware Event Log */ #define AifExeFirmwarePanic 3 /* Firmware Event Panic */ #define AifHighPriority 3 /* Highest Priority Event */ +#define AifEnAddJBOD 30 /* JBOD created */ +#define AifEnDeleteJBOD 31 /* JBOD deleted */ #define AifCmdJobProgress 2 /* Progress report */ #define AifJobCtrZero 101 /* Array Zero progress */ diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index 1dd2e57c3345..81b36923e0ef 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -901,7 +901,31 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) case AifEnConfigChange: break; + case AifEnAddJBOD: + case AifEnDeleteJBOD: + container = le32_to_cpu(((__le32 *)aifcmd->data)[1]); + if ((container >> 28)) + break; + channel = (container >> 24) & 0xF; + if (channel >= dev->maximum_num_channels) + break; + id = container & 0xFFFF; + if (id >= dev->maximum_num_physicals) + break; + lun = (container >> 16) & 0xFF; + channel = aac_phys_to_logical(channel); + device_config_needed = + (((__le32 *)aifcmd->data)[0] == + cpu_to_le32(AifEnAddJBOD)) ? ADD : DELETE; + break; + case AifEnEnclosureManagement: + /* + * If in JBOD mode, automatic exposure of new + * physical target to be suppressed until configured. + */ + if (dev->jbod) + break; switch (le32_to_cpu(((__le32 *)aifcmd->data)[3])) { case EM_DRIVE_INSERTION: case EM_DRIVE_REMOVAL: diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 5ab733d4faf4..61be22774e99 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -404,6 +404,7 @@ static int aac_slave_configure(struct scsi_device *sdev) struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata; if ((sdev->type == TYPE_DISK) && (sdev_channel(sdev) != CONTAINER_CHANNEL) && + (!aac->jbod || sdev->inq_periph_qual) && (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2))) { if (expose_physicals == 0) return -ENXIO; @@ -411,7 +412,8 @@ static int aac_slave_configure(struct scsi_device *sdev) sdev->no_uld_attach = 1; } if (sdev->tagged_supported && (sdev->type == TYPE_DISK) && - (sdev_channel(sdev) == CONTAINER_CHANNEL)) { + (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2)) && + !sdev->no_uld_attach) { struct scsi_device * dev; struct Scsi_Host *host = sdev->host; unsigned num_lsu = 0; @@ -430,8 +432,11 @@ static int aac_slave_configure(struct scsi_device *sdev) ++num_lsu; __shost_for_each_device(dev, host) { if (dev->tagged_supported && (dev->type == TYPE_DISK) && - (sdev_channel(dev) == CONTAINER_CHANNEL)) { - if (!aac->fsa_dev[sdev_id(dev)].valid) + (!aac->raid_scsi_mode || + (sdev_channel(sdev) != 2)) && + !dev->no_uld_attach) { + if ((sdev_channel(dev) != CONTAINER_CHANNEL) + || !aac->fsa_dev[sdev_id(dev)].valid) ++num_lsu; } else ++num_one; @@ -804,6 +809,8 @@ static ssize_t aac_show_flags(struct class_device *class_dev, char *buf) if (dev->raw_io_interface && dev->raw_io_64) len += snprintf(buf + len, PAGE_SIZE - len, "SAI_READ_CAPACITY_16\n"); + if (dev->jbod) + len += snprintf(buf + len, PAGE_SIZE - len, "SUPPORTED_JBOD\n"); return len; } @@ -1157,7 +1164,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, * all containers are on the virtual channel 0 (CONTAINER_CHANNEL) * physical channels are address by their actual physical number+1 */ - if ((aac->nondasd_support == 1) || expose_physicals) + if (aac->nondasd_support || expose_physicals || aac->jbod) shost->max_channel = aac->maximum_num_channels; else shost->max_channel = 0; -- cgit v1.2.3