From d6996e3cbd16751b7518d7061ad4710d78bc0646 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 14 Jul 2018 21:37:23 +0200 Subject: dt-bindings: arm: amlogic: Add support for the Oranth Tanix TX3 Mini The Tanix TX3 Mini is a TV box based on the Amlogic S905W chipset. It comes with: - 1 GiB or 2 GiB of DDR3 memory depending on the model - 8 GB or 16 GB eMMC flash depending on the model - 802.11 b/g/n wifi (Silicon Valley Microelectronics SSV6051, does not support Bluetooth, not supported by any mailine driver) - an LED 7 segment display with an FD628 controller (not supported by any mainline driver) - HDMI and AV (CVBS) output - 2x USB (utilizing both USB ports provided by the SoC) - micro SD card slot The board seems to be very similar to the P23x and Q20x reference boards: - eMMC reset routed to BOOT_9 - the SDIO wifi chip's reset line is routed to GPIOX_6 and the reference clock is 32.768KHz on PWM_E - SD card detection is routed to CARD_6 - vqmmc of all MMC controllers is hard-wired to 1.8V (VDDIO_BOOT) - uart_AO can be accessed after opening the case and soldering RX, TX and GND lines onto the exposed solder points (marked with RX, TX and GND) Signed-off-by: Martin Blumenstingl Reviewed-by: Rob Herring Reviewed-by: Neil Armstrong Signed-off-by: Kevin Hilman --- Documentation/devicetree/bindings/arm/amlogic.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 8178da8742c3..b5c2b5c35766 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -90,6 +90,7 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,p241" (Meson gxl s805x) - "amlogic,p281" (Meson gxl s905w) + - "oranth,tx3-mini" (Meson gxl s905w) - "amlogic,q200" (Meson gxm s912) - "amlogic,q201" (Meson gxm s912) -- cgit v1.2.3