From a83e4ca26af8fcf1e0d1a3fb681732e239ef5496 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 17 Feb 2020 00:19:36 +0900 Subject: kbuild: remove cc-option switch from -Wframe-larger-than= This CONFIG option was added by commit 35bb5b1e0e84 ("Add option to enable -Wframe-larger-than= on gcc 4.4"). At that time, the cc-option check was needed. According to Documentation/process/changes.rst, the current minimal supported version of GCC is 4.6, so you can assume GCC supports it. Clang supports it as well. Remove the cc-option switch and redundant comments. Signed-off-by: Masahiro Yamada Reviewed-by: Nathan Chancellor Reviewed-by: Nick Desaulniers --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 86035d866f2c..22bc7cc4b157 100644 --- a/Makefile +++ b/Makefile @@ -729,7 +729,7 @@ KBUILD_CFLAGS += $(call cc-option,-fno-reorder-blocks,) \ endif ifneq ($(CONFIG_FRAME_WARN),0) -KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN}) +KBUILD_CFLAGS += -Wframe-larger-than=$(CONFIG_FRAME_WARN) endif stackp-flags-$(CONFIG_CC_HAS_STACKPROTECTOR_NONE) := -fno-stack-protector -- cgit v1.2.3 From 2a86f6612164a10a3cdb6a499bddf329c4d69f84 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 28 Feb 2020 12:46:40 +0900 Subject: kbuild: use KBUILD_DEFCONFIG as the fallback for DEFCONFIG_LIST Most of the Kconfig commands (except defconfig and all*config) read the .config file as a base set of CONFIG options. When it does not exist, the files in DEFCONFIG_LIST are searched in this order and loaded if found. I do not see much sense in the last two lines in DEFCONFIG_LIST. [1] ARCH_DEFCONFIG The entry for DEFCONFIG_LIST is guarded by 'depends on !UML'. So, the ARCH_DEFCONFIG definition in arch/x86/um/Kconfig is meaningless. arch/{sh,sparc,x86}/Kconfig define ARCH_DEFCONFIG depending on 32 or 64 bit variant symbols. This is a little bit strange; ARCH_DEFCONFIG should be a fixed string because the base config file is loaded before the symbol evaluation stage. Using KBUILD_DEFCONFIG makes more sense because it is fixed before Kconfig is invoked. Fortunately, arch/{sh,sparc,x86}/Makefile define it in the same way, and it works as expected. Hence, replace ARCH_DEFCONFIG with "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)". [2] arch/$(ARCH)/defconfig This file path is no longer valid. The defconfig files are always located in the arch configs/ directories. $ find arch -name defconfig | sort arch/alpha/configs/defconfig arch/arm64/configs/defconfig arch/csky/configs/defconfig arch/nds32/configs/defconfig arch/riscv/configs/defconfig arch/s390/configs/defconfig arch/unicore32/configs/defconfig The path arch/*/configs/defconfig is already covered by "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)". So, this file path is not necessary. I moved the default KBUILD_DEFCONFIG to the top Makefile. Otherwise, the 7 architectures listed above would end up with endless loop of syncconfig. Signed-off-by: Masahiro Yamada --- Makefile | 3 +++ arch/sh/Kconfig | 5 ----- arch/sparc/Kconfig | 5 ----- arch/x86/Kconfig | 5 ----- arch/x86/um/Kconfig | 5 ----- init/Kconfig | 3 +-- scripts/kconfig/Makefile | 4 ---- 7 files changed, 4 insertions(+), 26 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 22bc7cc4b157..5435d11d8276 100644 --- a/Makefile +++ b/Makefile @@ -388,6 +388,9 @@ endif KCONFIG_CONFIG ?= .config export KCONFIG_CONFIG +# Default file for 'make defconfig'. This may be overridden by arch-Makefile. +export KBUILD_DEFCONFIG := defconfig + # SHELL used by kbuild CONFIG_SHELL := sh diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 9ece111b0254..b4f0e37b83eb 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -87,11 +87,6 @@ config SUPERH64 select HAVE_EXIT_THREAD select KALLSYMS -config ARCH_DEFCONFIG - string - default "arch/sh/configs/shx3_defconfig" if SUPERH32 - default "arch/sh/configs/cayman_defconfig" if SUPERH64 - config GENERIC_BUG def_bool y depends on BUG && SUPERH32 diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index c1dd6dd642f4..0de15380d1fc 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -95,11 +95,6 @@ config SPARC64 select PCI_DOMAINS if PCI select ARCH_HAS_GIGANTIC_PAGE -config ARCH_DEFCONFIG - string - default "arch/sparc/configs/sparc32_defconfig" if SPARC32 - default "arch/sparc/configs/sparc64_defconfig" if SPARC64 - config ARCH_PROC_KCORE_TEXT def_bool y diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index beea77046f9b..98935f4387f9 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -240,11 +240,6 @@ config OUTPUT_FORMAT default "elf32-i386" if X86_32 default "elf64-x86-64" if X86_64 -config ARCH_DEFCONFIG - string - default "arch/x86/configs/i386_defconfig" if X86_32 - default "arch/x86/configs/x86_64_defconfig" if X86_64 - config LOCKDEP_SUPPORT def_bool y diff --git a/arch/x86/um/Kconfig b/arch/x86/um/Kconfig index a8985e1f7432..95d26a69088b 100644 --- a/arch/x86/um/Kconfig +++ b/arch/x86/um/Kconfig @@ -27,11 +27,6 @@ config X86_64 def_bool 64BIT select MODULES_USE_ELF_RELA -config ARCH_DEFCONFIG - string - default "arch/um/configs/i386_defconfig" if X86_32 - default "arch/um/configs/x86_64_defconfig" if X86_64 - config 3_LEVEL_PGTABLES bool "Three-level pagetables" if !64BIT default 64BIT diff --git a/init/Kconfig b/init/Kconfig index 20a6ac33761c..240c1ed15c69 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -6,8 +6,7 @@ config DEFCONFIG_LIST default "/lib/modules/$(shell,uname -r)/.config" default "/etc/kernel-config" default "/boot/config-$(shell,uname -r)" - default ARCH_DEFCONFIG - default "arch/$(ARCH)/defconfig" + default "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)" config CC_IS_GCC def_bool $(success,$(CC) --version | head -n 1 | grep -q gcc) diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index 5887ceb6229e..c9d0a4a8efb3 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -12,10 +12,6 @@ else Kconfig := Kconfig endif -ifndef KBUILD_DEFCONFIG -KBUILD_DEFCONFIG := defconfig -endif - ifeq ($(quiet),silent_) silent := -s endif -- cgit v1.2.3 From 88694cff4952dba60227f421884ff4140d296900 Mon Sep 17 00:00:00 2001 From: Quentin Perret Date: Fri, 28 Feb 2020 17:20:15 +0000 Subject: kbuild: generate autoksyms.h early When doing a cold build, autoksyms.h starts empty, and is updated late in the build process to have visibility over the symbols used by in-tree drivers. But since the symbol whitelist is known upfront, it can be used to pre-populate autoksyms.h and maximize the amount of code that can be compiled to its final state in a single pass, hence reducing build time. Do this by using gen_autoksyms.sh to initialize autoksyms.h instead of creating an empty file. Acked-by: Nicolas Pitre Tested-by: Matthias Maennich Reviewed-by: Matthias Maennich Signed-off-by: Quentin Perret Signed-off-by: Masahiro Yamada --- Makefile | 7 +++++-- scripts/gen_autoksyms.sh | 3 ++- 2 files changed, 7 insertions(+), 3 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 5435d11d8276..f8b70cf80d79 100644 --- a/Makefile +++ b/Makefile @@ -1066,9 +1066,12 @@ endif autoksyms_h := $(if $(CONFIG_TRIM_UNUSED_KSYMS), include/generated/autoksyms.h) +quiet_cmd_autoksyms_h = GEN $@ + cmd_autoksyms_h = mkdir -p $(dir $@); \ + $(CONFIG_SHELL) $(srctree)/scripts/gen_autoksyms.sh $@ + $(autoksyms_h): - $(Q)mkdir -p $(dir $@) - $(Q)touch $@ + $(call cmd,autoksyms_h) ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(SRCARCH)/Makefile.postlink) diff --git a/scripts/gen_autoksyms.sh b/scripts/gen_autoksyms.sh index ef46200c366b..16c0b2ddaa4c 100755 --- a/scripts/gen_autoksyms.sh +++ b/scripts/gen_autoksyms.sh @@ -39,7 +39,8 @@ cat > "$output_file" << EOT EOT -sed 's/ko$/mod/' modules.order | +[ -f modules.order ] && modlist=modules.order || modlist=/dev/null +sed 's/ko$/mod/' $modlist | xargs -n1 sed -n -e '2{s/ /\n/g;/^$/!p;}' -- | cat - "$ksym_wl" | sort -u | -- cgit v1.2.3 From b5154bf63e5577faaaca1d942df274f7de91dd2a Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 4 Mar 2020 12:20:36 +0900 Subject: kbuild: avoid concurrency issue in parallel building dtbs and dtbs_check 'make dtbs_check' checks the shecma in addition to building *.dtb files, in other words, 'make dtbs_check' is a super-set of 'make dtbs'. So, you do not have to do 'make dtbs dtbs_check', but I want to keep the build system as robust as possible in any use. Currently, 'dtbs' and 'dtbs_check' are independent of each other. In parallel building, two threads descend into arch/*/boot/dts/, one for dtbs and the other for dtbs_check, then end up with building the same DTB simultaneously. This commit fixes the concurrency issue. Otherwise, I see build errors like follows: $ make ARCH=arm64 defconfig $ make -j16 ARCH=arm64 DT_SCHEMA_FILES=Documentation/devicetree/bindings/arm/psci.yaml dtbs dtbs_check DTC arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dtb DTC arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb DTC arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dtb DTC arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dtb DTC arch/arm64/boot/dts/freescale/imx8mn-evk.dtb DTC arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dtb DTC arch/arm64/boot/dts/zte/zx296718-pcbox.dtb DTC arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dt.yaml DTC arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb DTC arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dtb DTC arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dtb DTC arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dtb DTC arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dtb CHECK arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dt.yaml fixdep: error opening file: arch/arm64/boot/dts/allwinner/.sun50i-h6-orangepi-lite2.dtb.d: No such file or directory make[2]: *** [scripts/Makefile.lib:296: arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dtb] Error 2 make[2]: *** Deleting file 'arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dtb' make[2]: *** Waiting for unfinished jobs.... DTC arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-kd.dtb DTC arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb DTC arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dtb DTC arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dtb fixdep: parse error; no targets found make[2]: *** [scripts/Makefile.lib:296: arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dtb] Error 1 make[2]: *** Deleting file 'arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dtb' make[1]: *** [scripts/Makefile.build:505: arch/arm64/boot/dts/allwinner] Error 2 make[1]: *** Waiting for unfinished jobs.... DTC arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dtb Signed-off-by: Masahiro Yamada Reviewed-by: Rob Herring --- Makefile | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index f8b70cf80d79..da1966eacdce 100644 --- a/Makefile +++ b/Makefile @@ -1246,11 +1246,15 @@ ifneq ($(dtstree),) $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ PHONY += dtbs dtbs_install dtbs_check -dtbs dtbs_check: include/config/kernel.release scripts_dtc +dtbs: include/config/kernel.release scripts_dtc $(Q)$(MAKE) $(build)=$(dtstree) +ifneq ($(filter dtbs_check, $(MAKECMDGOALS)),) +dtbs: dt_binding_check +endif + dtbs_check: export CHECK_DTBS=1 -dtbs_check: dt_binding_check +dtbs_check: dtbs dtbs_install: $(Q)$(MAKE) $(dtbinst)=$(dtstree) -- cgit v1.2.3 From e10c4321dc1e017e472c3fa40bb4e93355921e67 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 4 Mar 2020 12:20:37 +0900 Subject: kbuild: allow to run dt_binding_check and dtbs_check in a single command Since commit 93512dad334d ("dt-bindings: Improve validation build error handling"), 'make dtbs_check' does not validate the schema fully. If you want to check everything, you need to run two commands separately. $ make ARCH=arm dt_binding_check $ make ARCH=arm dtbs_check They are exclusive each other, so you cannot do like this: $ make ARCH=arm dt_binding_check dtbs_check In this case, dt-doc-validate and dt-extract-example are skipped because CHECK_DTBS is set. Let's make it possible to run these two targets in a single command. It will be useful for schema writers. Signed-off-by: Masahiro Yamada Reviewed-by: Rob Herring --- Documentation/devicetree/bindings/Makefile | 8 +++----- Documentation/devicetree/writing-schema.rst | 4 ++++ Makefile | 6 +++++- 3 files changed, 12 insertions(+), 6 deletions(-) (limited to 'Makefile') diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index b62c0470f122..1df680d07461 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -26,10 +26,9 @@ DT_DOCS = $(addprefix $(src)/, \ DT_SCHEMA_FILES ?= $(DT_DOCS) -ifeq ($(CHECK_DTBS),) -extra-y += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES)) -extra-y += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES)) -extra-y += processed-schema-examples.yaml +extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES)) +extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES)) +extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml override DTC_FLAGS := \ -Wno-avoid_unnecessary_addr_size \ @@ -37,7 +36,6 @@ override DTC_FLAGS := \ $(obj)/processed-schema-examples.yaml: $(DT_DOCS) FORCE $(call if_changed,mk_schema) -endif $(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := -u $(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) FORCE diff --git a/Documentation/devicetree/writing-schema.rst b/Documentation/devicetree/writing-schema.rst index 7635ab230456..220cf464ed77 100644 --- a/Documentation/devicetree/writing-schema.rst +++ b/Documentation/devicetree/writing-schema.rst @@ -147,6 +147,10 @@ Note that ``dtbs_check`` will skip any binding schema files with errors. It is necessary to use ``dt_binding_check`` to get all the validation errors in the binding schema files. +It is possible to run both in a single command:: + + make dt_binding_check dtbs_check + It is also possible to run checks with a single schema file by setting the ``DT_SCHEMA_FILES`` variable to a specific schema file. diff --git a/Makefile b/Makefile index da1966eacdce..9387c96ec874 100644 --- a/Makefile +++ b/Makefile @@ -1250,10 +1250,10 @@ dtbs: include/config/kernel.release scripts_dtc $(Q)$(MAKE) $(build)=$(dtstree) ifneq ($(filter dtbs_check, $(MAKECMDGOALS)),) +export CHECK_DTBS=y dtbs: dt_binding_check endif -dtbs_check: export CHECK_DTBS=1 dtbs_check: dtbs dtbs_install: @@ -1269,6 +1269,10 @@ PHONY += scripts_dtc scripts_dtc: scripts_basic $(Q)$(MAKE) $(build)=scripts/dtc +ifneq ($(filter dt_binding_check, $(MAKECMDGOALS)),) +export CHECK_DT_BINDING=y +endif + PHONY += dt_binding_check dt_binding_check: scripts_dtc $(Q)$(MAKE) $(build)=Documentation/devicetree/bindings -- cgit v1.2.3 From 9dffecc1339b1f446213a9ba2f19579d9db4d7c7 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 4 Mar 2020 12:20:38 +0900 Subject: kbuild: allow to run dt_binding_check without kernel configuration The dt_binding_check target is located outside of the 'ifneq ($(dtstree),) ... endif' block. So, you can run 'make dt_binding_check' on any architecture. This makes a perfect sense because the dt-schema is arch-agnostic. The only one problem I see is that scripts/dtc/dtc is not always built. For example, ARCH=x86 defconfig does not define CONFIG_DTC. Kbuild descends into scripts/dtc/ with doing nothing. Then, it fails to build *.example.dt.yaml files. Let's build scripts/dtc/dtc forcibly when running dt_binding_check. The dt-schema does not depend on any CONFIG option either, so you should be able to run dt_binding_check without the .config file. Going forward, you can directly run 'make dt_binding_check' in a pristine source tree. Signed-off-by: Masahiro Yamada Reviewed-by: Rob Herring --- Makefile | 2 +- scripts/dtc/Makefile | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 9387c96ec874..96f6ca3004cf 100644 --- a/Makefile +++ b/Makefile @@ -255,7 +255,7 @@ clean-targets := %clean mrproper cleandocs no-dot-config-targets := $(clean-targets) \ cscope gtags TAGS tags help% %docs check% coccicheck \ $(version_h) headers headers_% archheaders archscripts \ - %asm-generic kernelversion %src-pkg + %asm-generic kernelversion %src-pkg dt_binding_check no-sync-config-targets := $(no-dot-config-targets) install %install \ kernelrelease single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.s %.symtypes %/ diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile index 3acbb410904c..2f3c3a7e1620 100644 --- a/scripts/dtc/Makefile +++ b/scripts/dtc/Makefile @@ -1,8 +1,9 @@ # SPDX-License-Identifier: GPL-2.0 # scripts/dtc makefile -hostprogs := dtc -always-$(CONFIG_DTC) := $(hostprogs) +hostprogs := dtc +always-$(CONFIG_DTC) += $(hostprogs) +always-$(CHECK_DT_BINDING) += $(hostprogs) dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \ srcpos.o checks.o util.o -- cgit v1.2.3 From b1112139a103b4b1101d0d2d72931f2d33d8c978 Mon Sep 17 00:00:00 2001 From: Sergei Trofimovich Date: Tue, 17 Mar 2020 00:07:18 +0000 Subject: Makefile: disallow data races on gcc-10 as well gcc-10 will rename --param=allow-store-data-races=0 to -fno-allow-store-data-races. The flag change happened at https://gcc.gnu.org/PR92046. Signed-off-by: Sergei Trofimovich Acked-by: Jiri Kosina Signed-off-by: Masahiro Yamada --- Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 96f6ca3004cf..8533bb68d69b 100644 --- a/Makefile +++ b/Makefile @@ -717,6 +717,7 @@ endif # Tell gcc to never replace conditional load with a non-conditional one KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0) +KBUILD_CFLAGS += $(call cc-option,-fno-allow-store-data-races) include scripts/Makefile.kcov include scripts/Makefile.gcc-plugins -- cgit v1.2.3 From 2431f22a911a6130a10b4a0c6f13d10ede007d39 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 7 Mar 2020 02:08:51 +0900 Subject: kbuild: compute the dtbs_install destination more simply The 'dtbinst_root' is used to remember the root of the in-kernel dts directory (i.e. arch/*/boot/dts), but it looks clumsy. I prefer using two variables 'obj' and 'dst' to track the in-kernel directory and the install destination, respectively. Signed-off-by: Masahiro Yamada --- Makefile | 2 +- scripts/Makefile.dtbinst | 8 ++------ 2 files changed, 3 insertions(+), 7 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 8533bb68d69b..d32e8c86f09c 100644 --- a/Makefile +++ b/Makefile @@ -1258,7 +1258,7 @@ endif dtbs_check: dtbs dtbs_install: - $(Q)$(MAKE) $(dtbinst)=$(dtstree) + $(Q)$(MAKE) $(dtbinst)=$(dtstree) dst=$(INSTALL_DTBS_PATH) ifdef CONFIG_OF_EARLY_FLATTREE all: dtbs diff --git a/scripts/Makefile.dtbinst b/scripts/Makefile.dtbinst index 7301ab5e2e06..fcd5f2eaaad1 100644 --- a/scripts/Makefile.dtbinst +++ b/scripts/Makefile.dtbinst @@ -13,8 +13,6 @@ src := $(obj) PHONY := __dtbs_install __dtbs_install: -export dtbinst_root ?= $(obj) - include include/config/auto.conf include scripts/Kbuild.include include $(src)/Makefile @@ -26,13 +24,11 @@ dtbinst-dirs := $(subdir-y) $(subdir-m) quiet_cmd_dtb_install = INSTALL $< cmd_dtb_install = mkdir -p $(2); cp $< $(2) -install-dir = $(patsubst $(dtbinst_root)%,$(INSTALL_DTBS_PATH)%,$(obj)) - $(dtbinst-files): %.dtb: $(obj)/%.dtb - $(call cmd,dtb_install,$(install-dir)) + $(call cmd,dtb_install,$(dst)) $(dtbinst-dirs): - $(Q)$(MAKE) $(dtbinst)=$(obj)/$@ + $(Q)$(MAKE) $(dtbinst)=$(obj)/$@ dst=$(dst)/$@ PHONY += $(dtbinst-files) $(dtbinst-dirs) __dtbs_install: $(dtbinst-files) $(dtbinst-dirs) -- cgit v1.2.3 From 735aab1e008b6d9ba8057caa647b6619bf73460f Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 25 Mar 2020 12:14:32 +0900 Subject: kbuild: add -Wall to KBUILD_HOSTCXXFLAGS Add -Wall to catch more warnings for C++ host programs. When I submitted the previous version, the 0-day bot reported -Wc++11-compat warnings for old GCC: HOSTCXX -fPIC scripts/gcc-plugins/latent_entropy_plugin.o In file included from /usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/tm.h:28:0, from scripts/gcc-plugins/gcc-common.h:15, from scripts/gcc-plugins/latent_entropy_plugin.c:78: /usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/config/elfos.h:102:21: warning: C++11 requires a space between string literal and macro [-Wc++11-compat] fprintf ((FILE), "%s"HOST_WIDE_INT_PRINT_UNSIGNED"\n",\ ^ /usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/config/elfos.h:170:24: warning: C++11 requires a space between string literal and macro [-Wc++11-compat] fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED",%u\n", \ ^ In file included from /usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/tm.h:42:0, from scripts/gcc-plugins/gcc-common.h:15, from scripts/gcc-plugins/latent_entropy_plugin.c:78: /usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/defaults.h:126:24: warning: C++11 requires a space between string literal and macro [-Wc++11-compat] fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED",%u\n", \ ^ The source of the warnings is in the plugin headers, so we have no control of it. I just suppressed them by adding -Wno-c++11-compat to scripts/gcc-plugins/Makefile. Signed-off-by: Masahiro Yamada Acked-by: Kees Cook --- Makefile | 2 +- scripts/gcc-plugins/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index d32e8c86f09c..4697d7ce15f2 100644 --- a/Makefile +++ b/Makefile @@ -403,7 +403,7 @@ HOSTCXX = g++ KBUILD_HOSTCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 \ -fomit-frame-pointer -std=gnu89 $(HOST_LFS_CFLAGS) \ $(HOSTCFLAGS) -KBUILD_HOSTCXXFLAGS := -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS) +KBUILD_HOSTCXXFLAGS := -Wall -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS) KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS) KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS) diff --git a/scripts/gcc-plugins/Makefile b/scripts/gcc-plugins/Makefile index f2ee8bd7abc6..efff00959a9c 100644 --- a/scripts/gcc-plugins/Makefile +++ b/scripts/gcc-plugins/Makefile @@ -10,7 +10,7 @@ else HOSTLIBS := hostcxxlibs HOST_EXTRACXXFLAGS += -I$(GCC_PLUGINS_DIR)/include -I$(src) -std=gnu++98 -fno-rtti HOST_EXTRACXXFLAGS += -fno-exceptions -fasynchronous-unwind-tables -ggdb - HOST_EXTRACXXFLAGS += -Wno-narrowing -Wno-unused-variable + HOST_EXTRACXXFLAGS += -Wno-narrowing -Wno-unused-variable -Wno-c++11-compat export HOST_EXTRACXXFLAGS endif -- cgit v1.2.3 From f463c3510d44ab11da607d7c3b289f90ea467d1b Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 25 Mar 2020 12:16:30 +0900 Subject: kbuild: add comment about grouped target GNU Make commit 8c888d95f618 ("[SV 8297] Implement "grouped targets" for explicit rules.") added the '&:' syntax. I think '&:' is a perfect fit here, but we cannot use it any time soon. Just add a TODO comment. Signed-off-by: Masahiro Yamada --- Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 4697d7ce15f2..7863d2a8de6c 100644 --- a/Makefile +++ b/Makefile @@ -677,6 +677,7 @@ $(KCONFIG_CONFIG): # # This exploits the 'multi-target pattern rule' trick. # The syncconfig should be executed only once to make all the targets. +# (Note: use the grouped target '&:' when we bump to GNU Make 4.3) %/auto.conf %/auto.conf.cmd: $(KCONFIG_CONFIG) $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig else # !may-sync-config -- cgit v1.2.3 From aa824e0c962b532d5073cbb41b2efcd6f5e72bae Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 26 Mar 2020 14:57:18 +0900 Subject: kbuild: remove AS variable As commit 5ef872636ca7 ("kbuild: get rid of misleading $(AS) from documents") noted, we rarely use $(AS) directly in the kernel build. Now that the only/last user of $(AS) in drivers/net/wan/Makefile was converted to $(CC), $(AS) is no longer used in the build process. You can still pass in AS=clang, which is just a switch to turn on the LLVM integrated assembler. Signed-off-by: Masahiro Yamada Reviewed-by: Nick Desaulniers Tested-by: Nick Desaulniers Reviewed-by: Nathan Chancellor --- Makefile | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 7863d2a8de6c..89e1eb75c819 100644 --- a/Makefile +++ b/Makefile @@ -408,7 +408,6 @@ KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS) KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS) # Make variables (CC, etc...) -AS = $(CROSS_COMPILE)as LD = $(CROSS_COMPILE)ld CC = $(CROSS_COMPILE)gcc CPP = $(CC) -E @@ -475,7 +474,7 @@ KBUILD_LDFLAGS := GCC_PLUGINS_CFLAGS := CLANG_FLAGS := -export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC +export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE READELF PAHOLE LEX YACC AWK INSTALLKERNEL export PERL PYTHON PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE @@ -538,7 +537,7 @@ endif ifneq ($(GCC_TOOLCHAIN),) CLANG_FLAGS += --gcc-toolchain=$(GCC_TOOLCHAIN) endif -ifeq ($(shell $(AS) --version 2>&1 | head -n 1 | grep clang),) +ifeq ($(if $(AS),$(shell $(AS) --version 2>&1 | head -n 1 | grep clang)),) CLANG_FLAGS += -no-integrated-as endif CLANG_FLAGS += -Werror=unknown-warning-option -- cgit v1.2.3 From 4623980dea7c688bd5fdce406e01726654b04104 Mon Sep 17 00:00:00 2001 From: David Engraf Date: Thu, 26 Mar 2020 20:29:33 +0100 Subject: kbuild: add outputmakefile to no-dot-config-targets The target outputmakefile is used to generate a Makefile for out-of-tree builds and does not depend on the kernel configuration. Signed-off-by: David Engraf Signed-off-by: Masahiro Yamada --- Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 89e1eb75c819..a74ba6f305b0 100644 --- a/Makefile +++ b/Makefile @@ -255,7 +255,8 @@ clean-targets := %clean mrproper cleandocs no-dot-config-targets := $(clean-targets) \ cscope gtags TAGS tags help% %docs check% coccicheck \ $(version_h) headers headers_% archheaders archscripts \ - %asm-generic kernelversion %src-pkg dt_binding_check + %asm-generic kernelversion %src-pkg dt_binding_check \ + outputmakefile no-sync-config-targets := $(no-dot-config-targets) install %install \ kernelrelease single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.s %.symtypes %/ -- cgit v1.2.3 From e51d8dacf2724ebb8eda8ec69dd81da4f70a4213 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Mon, 30 Mar 2020 12:07:11 -0600 Subject: Makefile: Update kselftest help information Update kselftest help information. Signed-off-by: Shuah Khan Signed-off-by: Masahiro Yamada --- Makefile | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index a74ba6f305b0..f3f971a500c8 100644 --- a/Makefile +++ b/Makefile @@ -1486,12 +1486,15 @@ help: @echo ' nsdeps - Generate missing symbol namespace dependencies' @echo '' @echo 'Kernel selftest:' - @echo ' kselftest - Build and run kernel selftest (run as root)' - @echo ' Build, install, and boot kernel before' - @echo ' running kselftest on it' - @echo ' kselftest-clean - Remove all generated kselftest files' - @echo ' kselftest-merge - Merge all the config dependencies of kselftest to existing' - @echo ' .config.' + @echo ' kselftest - Build and run kernel selftest' + @echo ' Build, install, and boot kernel before' + @echo ' running kselftest on it' + @echo ' Run as root for full coverage' + @echo ' kselftest-all - Build kernel selftest' + @echo ' kselftest-install - Build and install kernel selftest' + @echo ' kselftest-clean - Remove all generated kselftest files' + @echo ' kselftest-merge - Merge all the config dependencies of' + @echo ' kselftest to existing .config.' @echo '' @$(if $(dtstree), \ echo 'Devicetree:'; \ -- cgit v1.2.3