From daf67dfc5989495c887cfdbe76be72b7db724e60 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 16 May 2014 06:59:18 +0900 Subject: ARM: S3C24XX: trim down debug uart handling Using the lowlevel debug uart is a corner case - even more so in a multiplatform environment. So it seems reasonable to simply let the developer set the appropriate uart type for the debugged SoC. Signed-off-by: Heiko Stuebner Signed-off-by: Kukjin Kim --- arch/arm/Kconfig.debug | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch/arm/Kconfig.debug') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index eab8ecbe69c1..8c72e1003b9a 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -670,6 +670,33 @@ choice The uncompressor code port configuration is now handled by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_S3C2410_UART0 + depends on ARCH_S3C24XX + select DEBUG_S3C2410_UART + bool "Use S3C2410/S3C2412 UART 0 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 0. The port must have been initialised + by the boot-loader before use. + + config DEBUG_S3C2410_UART1 + depends on ARCH_S3C24XX + select DEBUG_S3C2410_UART + bool "Use S3C2410/S3C2412 UART 1 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 1. The port must have been initialised + by the boot-loader before use. + + config DEBUG_S3C2410_UART2 + depends on ARCH_S3C24XX + select DEBUG_S3C2410_UART + bool "Use S3C2410/S3C2412 UART 2 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 2. The port must have been initialised + by the boot-loader before use. + config DEBUG_SOCFPGA_UART depends on ARCH_SOCFPGA bool "Use SOCFPGA UART for low-level debug" @@ -921,6 +948,9 @@ endchoice config DEBUG_EXYNOS_UART bool +config DEBUG_S3C2410_UART + bool + config DEBUG_OMAP2PLUS_UART bool depends on ARCH_OMAP2PLUS -- cgit v1.2.3 From 1899de2894970fbeece3a97dd69d5321fb00972b Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 16 May 2014 06:59:18 +0900 Subject: ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro This removes the need for mach/-headers in the debug macro. Signed-off-by: Heiko Stuebner Signed-off-by: Kukjin Kim --- arch/arm/Kconfig.debug | 23 +++++++++++++++++++++-- arch/arm/mach-s3c24xx/include/mach/debug-macro.S | 9 ++------- 2 files changed, 23 insertions(+), 9 deletions(-) (limited to 'arch/arm/Kconfig.debug') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 8c72e1003b9a..104c8fb818ed 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -625,6 +625,7 @@ choice config DEBUG_S3C_UART0 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S3C24XX_UART if ARCH_S3C24XX bool "Use S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -637,6 +638,7 @@ choice config DEBUG_S3C_UART1 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S3C24XX_UART if ARCH_S3C24XX bool "Use S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -649,6 +651,7 @@ choice config DEBUG_S3C_UART2 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S3C24XX_UART if ARCH_S3C24XX bool "Use S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -950,6 +953,10 @@ config DEBUG_EXYNOS_UART config DEBUG_S3C2410_UART bool + select DEBUG_S3C24XX_UART + +config DEBUG_S3C24XX_UART + bool config DEBUG_OMAP2PLUS_UART bool @@ -1059,6 +1066,12 @@ config DEBUG_UART_PHYS default 0x40090000 if ARCH_LPC32XX default 0x40100000 if DEBUG_PXA_UART1 default 0x42000000 if ARCH_GEMINI + default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ + DEBUG_S3C2410_UART0) + default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ + DEBUG_S3C2410_UART1) + default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ + DEBUG_S3C2410_UART2) default 0x7c0003f8 if FOOTBRIDGE default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART @@ -1088,7 +1101,7 @@ config DEBUG_UART_PHYS default 0xfffff700 if ARCH_IOP33X depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_LL_UART_EFM32 || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X + DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_S3C24XX_UART config DEBUG_UART_VIRT hex "Virtual base address of debug UART" @@ -1105,6 +1118,12 @@ config DEBUG_UART_VIRT default 0xf2100000 if DEBUG_PXA_UART1 default 0xf4090000 if ARCH_LPC32XX default 0xf4200000 if ARCH_GEMINI + default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ + DEBUG_S3C2410_UART0) + default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ + DEBUG_S3C2410_UART1) + default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ + DEBUG_S3C2410_UART2) default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9 default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 @@ -1146,7 +1165,7 @@ config DEBUG_UART_VIRT default 0xff003000 if DEBUG_U300_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X + DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_S3C24XX_UART config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S index fbe3e711ebab..b1f54dc4888c 100644 --- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S @@ -12,18 +12,13 @@ * published by the Free Software Foundation. */ -#include #include #define S3C2410_UART1_OFF (0x4000) .macro addruart, rp, rv, tmp - ldr \rp, = S3C24XX_PA_UART - ldr \rv, = S3C24XX_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) -#endif + ldr \rp, = CONFIG_DEBUG_UART_PHYS + ldr \rv, = CONFIG_DEBUG_UART_VIRT .endm .macro fifo_full_s3c2410 rd, rx -- cgit v1.2.3 From 2cd62bd4e5226ae5fa61f58ade8148f2e4643335 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 16 May 2014 06:59:18 +0900 Subject: ARM: S3C24XX: move debug-macro.S into the common space Move debug-macro.S from mach/include to include/debug where all other common debug macros are. Signed-off-by: Heiko Stuebner Signed-off-by: Kukjin Kim --- arch/arm/Kconfig.debug | 1 + arch/arm/include/debug/s3c24xx.S | 46 ++++++++++++++++++++++++ arch/arm/mach-s3c24xx/include/mach/debug-macro.S | 46 ------------------------ 3 files changed, 47 insertions(+), 46 deletions(-) create mode 100644 arch/arm/include/debug/s3c24xx.S delete mode 100644 arch/arm/mach-s3c24xx/include/mach/debug-macro.S (limited to 'arch/arm/Kconfig.debug') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 104c8fb818ed..4678870f8ee8 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1010,6 +1010,7 @@ config DEBUG_LL_INCLUDE DEBUG_IMX6SL_UART default "debug/msm.S" if DEBUG_MSM_UART default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART + default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 default "debug/sti.S" if DEBUG_STI_UART default "debug/tegra.S" if DEBUG_TEGRA_UART diff --git a/arch/arm/include/debug/s3c24xx.S b/arch/arm/include/debug/s3c24xx.S new file mode 100644 index 000000000000..b1f54dc4888c --- /dev/null +++ b/arch/arm/include/debug/s3c24xx.S @@ -0,0 +1,46 @@ +/* arch/arm/mach-s3c2410/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Copyright (C) 2005 Simtec Electronics + * + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include + +#define S3C2410_UART1_OFF (0x4000) + + .macro addruart, rp, rv, tmp + ldr \rp, = CONFIG_DEBUG_UART_PHYS + ldr \rv, = CONFIG_DEBUG_UART_VIRT + .endm + + .macro fifo_full_s3c2410 rd, rx + ldr \rd, [\rx, # S3C2410_UFSTAT] + tst \rd, #S3C2410_UFSTAT_TXFULL + .endm + + .macro fifo_level_s3c2410 rd, rx + ldr \rd, [\rx, # S3C2410_UFSTAT] + and \rd, \rd, #S3C2410_UFSTAT_TXMASK + .endm + +/* Select the correct implementation depending on the configuration. The + * S3C2440 will get selected by default, as these are the most widely + * used variants of these +*/ + +#if defined(CONFIG_DEBUG_S3C2410_UART) +#define fifo_full fifo_full_s3c2410 +#define fifo_level fifo_level_s3c2410 +#endif + +/* include the reset of the code which will do the work */ + +#include diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S deleted file mode 100644 index b1f54dc4888c..000000000000 --- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S +++ /dev/null @@ -1,46 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Copyright (C) 2005 Simtec Electronics - * - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include - -#define S3C2410_UART1_OFF (0x4000) - - .macro addruart, rp, rv, tmp - ldr \rp, = CONFIG_DEBUG_UART_PHYS - ldr \rv, = CONFIG_DEBUG_UART_VIRT - .endm - - .macro fifo_full_s3c2410 rd, rx - ldr \rd, [\rx, # S3C2410_UFSTAT] - tst \rd, #S3C2410_UFSTAT_TXFULL - .endm - - .macro fifo_level_s3c2410 rd, rx - ldr \rd, [\rx, # S3C2410_UFSTAT] - and \rd, \rd, #S3C2410_UFSTAT_TXMASK - .endm - -/* Select the correct implementation depending on the configuration. The - * S3C2440 will get selected by default, as these are the most widely - * used variants of these -*/ - -#if defined(CONFIG_DEBUG_S3C2410_UART) -#define fifo_full fifo_full_s3c2410 -#define fifo_level fifo_level_s3c2410 -#endif - -/* include the reset of the code which will do the work */ - -#include -- cgit v1.2.3