From 724ba6751532055db75992fc6ae21c3e322e94a7 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 4 May 2023 18:38:52 -0500 Subject: ARM: dts: Move .dts files to vendor sub-directories The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar Acked-by: Michal Simek #Xilinx Acked-by: Krzysztof Kozlowski Acked-by: Neil Armstrong Acked-by: Paul Barker Acked-by: Tony Lindgren Acked-by: Gregory CLEMENT Acked-by: Heiko Stuebner Acked-by: Wei Xu #hisilicon Acked-by: Geert Uytterhoeven Acked-by: Nick Hawkins Acked-by: Baruch Siach Reviewed-by: Linus Walleij Reviewed-by: Andre Przywara Acked-by: Andre Przywara Reviewed-by: Claudiu Beznea Acked-by: Peter Rosin Acked-by: Jesper Nilsson Acked-by: Sudeep Holla Acked-by: Florian Fainelli #broadcom Acked-by: Manivannan Sadhasivam Reviewed-by: Jisheng Zhang Acked-by: Patrice Chotard Acked-by: Romain Perier Acked-by: Alexandre TORGUE Acked-by: Shawn Guo Acked-by: Kunihiko Hayashi Acked-by: Enric Balletbo i Serra Signed-off-by: Rob Herring --- arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts | 203 +++++++++++++++++++++ 1 file changed, 203 insertions(+) create mode 100644 arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts (limited to 'arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts') diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts b/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts new file mode 100644 index 000000000000..0bd1336206b8 --- /dev/null +++ b/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// Copyright (C) 2021 Ivan Uvarov +// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is: +// Copyright (C) 2017 Chen-Yu Tsai +// Copyright (C) 2017 Icenowy Zheng + +/dts-v1/; +#include "sun8i-r40-feta40i.dtsi" + +#include +#include + +/ { + model = "Forlinx OKA40i-C"; + compatible = "forlinx,oka40i-c", "forlinx,feta40i-c", "allwinner,sun8i-r40"; + + aliases { + ethernet0 = &gmac; + serial0 = &uart0; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; /* RS485 */ + serial7 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-5 { /* this is how the leds are labeled on the board */ + gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */ + color = ; + function = LED_FUNCTION_STATUS; + }; + + led-6 { + gpios = <&pio 8 15 GPIO_ACTIVE_LOW>; /* PI15 */ + color = ; + function = LED_FUNCTION_STATUS; + }; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN + clocks = <&ccu CLK_OUTA>; + clock-names = "ext_clock"; + }; +}; + +&ahci { + ahci-supply = <®_dldo4>; + phy-supply = <®_eldo2>; + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_rgmii_pins>; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + phy-supply = <®_dcdc1>; + status = "okay"; +}; + +&gmac_mdio { + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 8 11 GPIO_ACTIVE_LOW>; // PI11 + status = "okay"; +}; + +&mmc3 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 8 10 GPIO_ACTIVE_LOW>; // PI10 + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +®_dc1sw { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-lcd"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +&tcon_tv0 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pi_pins>, <&uart2_rts_cts_pi_pins>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pg_pins>; + status = "okay"; +}; + +&uart5 { /* RS485 */ + pinctrl-names = "default"; + pinctrl-0 = <&uart5_ph_pins>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pi_pins>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc5v0>; + usb2_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; -- cgit v1.2.3