From 934b524b3f499954c83f248afdddaa0f62b59657 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Mon, 6 Jan 2014 23:49:17 +0100 Subject: ARM: Kirkwood: Add DT description of QNAP 419 Re-implement the Marvell Kirkwood ts41x-setup.c in DT. As with the QNAP 119, there are two variants, depending on which SoC has been used. They differ on Ethernet PHY addresses and number of PCIe busses. Signed-off-by: Andrew Lunn Tested-by: Ian Campbell (kirkwood-ts419-6281.dtb) Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-ts419.dtsi | 75 +++++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) create mode 100644 arch/arm/boot/dts/kirkwood-ts419.dtsi (limited to 'arch/arm/boot/dts/kirkwood-ts419.dtsi') diff --git a/arch/arm/boot/dts/kirkwood-ts419.dtsi b/arch/arm/boot/dts/kirkwood-ts419.dtsi new file mode 100644 index 000000000000..1a9c624c7a92 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ts419.dtsi @@ -0,0 +1,75 @@ +/* + * Device Tree include file for QNAP TS41X + * + * Copyright (C) 2013, Andrew Lunn + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/ { + model = "QNAP TS419 family"; + compatible = "qnap,ts419", "marvell,kirkwood"; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + pinctrl-names = "default"; + + pmx_USB_copy_button: pmx-USB-copy-button { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_reset_button: pmx-reset-button { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + /* + * JP1 indicates if an LCD module is installed + * on the serial port (0), or if the port is used + * as a console (1). + */ + pmx_jumper_jp1: pmx-jumper_jp1 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; + pinctrl-names = "default"; + + button@1 { + label = "USB Copy"; + linux,code = ; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + button@2 { + label = "Reset"; + linux,code = ; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy1: ethernet-phy@1 { + device_type = "ethernet-phy"; + /* overwrite reg property in board file */ + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; -- cgit v1.2.3