From 1e68f43b7dcf0e5eee10baeb3cbe4e1ca59db9fd Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 24 May 2013 17:24:21 -0700 Subject: ARM: dts: omap4-panda|sdp: Fix mux for twl6030 IRQ pin and msecure line Earlier commits ensured proper muxing of pins related to proper TWL6030 behavior: see commit 265a2bc8 (ARM: OMAP3: TWL4030: ensure sys_nirq1 is mux'd and wakeup enabled) and commit 1ef43369 (ARM: OMAP4: TWL: mux sys_drm_msecure as output for PMIC). However these only fixed legacy boot and not DT boot. For DT boot, the default mux values need to be set properly in DT. Special thanks to Nishanth Menon for the review and catching some major flaws in earlier versions. Tested on OMAP4430/Panda and OMAP4460/Panda-ES. Cc: Nishanth Menon Cc: Tony Lindgren Signed-off-by: Kevin Hilman Acked-by: Grygorii Strashko [benoit.cousson@linaro.org: Slightly change the subject to align board name with file name] Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap4-sdp.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch/arm/boot/dts/omap4-sdp.dts') diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index a35d9cd58063..98505a2ef162 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -142,9 +142,23 @@ }; }; +&omap4_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6030_wkup_pins + >; + + twl6030_wkup_pins: pinmux_twl6030_wkup_pins { + pinctrl-single,pins = < + 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */ + >; + }; +}; + &omap4_pmx_core { pinctrl-names = "default"; pinctrl-0 = < + &twl6030_pins &twl6040_pins &mcpdm_pins &dmic_pins @@ -179,6 +193,12 @@ >; }; + twl6030_pins: pinmux_twl6030_pins { + pinctrl-single,pins = < + 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */ + >; + }; + twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ -- cgit v1.2.3