From 7465d81191a12f0896d121f319da702580739433 Mon Sep 17 00:00:00 2001 From: Fabrice GASNIER Date: Mon, 9 Jan 2017 14:08:32 +0100 Subject: ARM: dts: stm32: enable ADC on stm32f429i-eval board Enable analog to digital converter on stm32f429i-eval board. It has on-board potentimeter wired to ADC3 in8 analog pin and uses fixed regulator to provide reference voltage. Signed-off-by: Fabrice Gasnier Signed-off-by: Alexandre TORGUE --- arch/arm/boot/dts/stm32429i-eval.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch/arm/boot/dts/stm32429i-eval.dts') diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 5436e880e28f..21812207dcfa 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -70,6 +70,20 @@ dma-ranges = <0xc0000000 0x0 0x10000000>; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_vref: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vref"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + leds { compatible = "gpio-leds"; green { @@ -112,6 +126,17 @@ }; }; +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc3_in8_pin>; + vref-supply = <®_vref>; + status = "okay"; + adc3: adc@200 { + st,adc-channels = <8>; + status = "okay"; + }; +}; + &clk_hse { clock-frequency = <25000000>; }; -- cgit v1.2.3