From d8cacaa34f80e52c64610abe0666104efce8c8e1 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sun, 3 May 2015 11:53:07 +0200 Subject: ARM: sunxi: DT: Fix lines over 80 characters A few lines in our DTSIs are over the 80 characters limit, making checkpatch complain about that. If possible (and relevant), wrap these lines to 80 characters. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) (limited to 'arch/arm/boot/dts/sun6i-a31.dtsi') diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 27d60e9a4bb8..9ec3f7a5b6e0 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -62,7 +62,8 @@ ranges; framebuffer@0 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll6 0>; status = "disabled"; @@ -299,9 +300,10 @@ reg = <0x01c2006c 0x4>; clocks = <&apb2>; clock-output-names = "apb2_i2c0", "apb2_i2c1", - "apb2_i2c2", "apb2_i2c3", "apb2_uart0", - "apb2_uart1", "apb2_uart2", "apb2_uart3", - "apb2_uart4", "apb2_uart5"; + "apb2_i2c2", "apb2_i2c3", + "apb2_uart0", "apb2_uart1", + "apb2_uart2", "apb2_uart3", + "apb2_uart4", "apb2_uart5"; }; mmc0_clk: clk@01c20088 { @@ -388,10 +390,13 @@ }; /* - * The following two are dummy clocks, placeholders used in the gmac_tx - * clock. The gmac driver will choose one parent depending on the PHY - * interface mode, using clk_set_rate auto-reparenting. - * The actual TX clock rate is not controlled by the gmac_tx clock. + * The following two are dummy clocks, placeholders + * used in the gmac_tx clock. The gmac driver will + * choose one parent depending on the PHY interface + * mode, using clk_set_rate auto-reparenting. + * + * The actual TX clock rate is not controlled by the + * gmac_tx clock. */ mii_phy_tx_clk: clk@1 { #clock-cells = <0>; @@ -627,7 +632,8 @@ }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; allwinner,function = "mmc0"; allwinner,drive = ; allwinner,pull = ; @@ -865,7 +871,8 @@ }; timer@01c60000 { - compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; + compatible = "allwinner,sun6i-a31-hstimer", + "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; interrupts = , , @@ -956,7 +963,8 @@ ar100: ar100_clk { compatible = "allwinner,sun6i-a31-ar100-clk"; #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; + clocks = <&osc32k>, <&osc24M>, <&pll6 0>, + <&pll6 0>; clock-output-names = "ar100"; }; -- cgit v1.2.3