From 597eb8e187c4902d21536fed3edd98bf24696d1d Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 25 Apr 2014 17:44:49 +0200 Subject: ARM: tegra: beaver - Add +5V HDMI supply This supply controls the +5V pin on the HDMI connector, which in turn is used by attached sinks to return the hotplug detect signal. Signed-off-by: Thierry Reding Signed-off-by: Stephen Warren --- arch/arm/boot/dts/tegra30-beaver.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/arm/boot/dts/tegra30-beaver.dts') diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index e93fe45b7803..3189791a9289 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -40,6 +40,7 @@ hdmi@54280000 { status = "okay"; + hdmi-supply = <&vdd_5v0_hdmi>; vdd-supply = <&sys_3v3_reg>; pll-supply = <&vio_reg>; @@ -478,6 +479,17 @@ gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; + + vdd_5v0_hdmi: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "+VDD_5V_HDMI"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&sys_3v3_reg>; + }; }; sound { -- cgit v1.2.3