From f5432f01240ef69a391940d623b6a51768aefd65 Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Wed, 15 Feb 2017 20:42:52 +0530 Subject: ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI commit 50e95b6b854c ("ARM: dts: am57xx-idk: Add Industrial output support") added the TPIC2810 device-tree node under SPI bus instead of I2C1. Fix it. Tested on AM572x IDK by driving on-board LEDs connected to TPIC2810 Fixes: 50e95b6b854c ("ARM: dts: am57xx-idk: Add Industrial output support") Signed-off-by: Sekhar Nori Acked-by: Andrew F. Davis Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-idk-common.dtsi | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 814a720d5c3d..d0a55b845690 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -311,6 +311,13 @@ /* ID & VBUS GPIOs provided in board dts */ }; }; + + tpic2810: tpic2810@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + }; }; &mcspi3 { @@ -326,13 +333,6 @@ spi-max-frequency = <1000000>; spi-cpol; }; - - tpic2810: tpic2810@60 { - compatible = "ti,tpic2810"; - reg = <0x60>; - gpio-controller; - #gpio-cells = <2>; - }; }; &uart3 { -- cgit v1.2.3 From 48385896e9c53e1061f103e1271a6be9a7ea00c4 Mon Sep 17 00:00:00 2001 From: Teresa Remmet Date: Fri, 10 Feb 2017 13:29:07 +0100 Subject: ARM: dts: am335x-pcm953: Fix legacy wakeup source binding Replaced the legacy binding "gpio-key,wakeup" with "wakeup-source" as noted in the kernel documentation. Signed-off-by: Teresa Remmet Reported-by: Sudeep Holla Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-pcm-953.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi index 02981eae96b9..1ec8e0d80191 100644 --- a/arch/arm/boot/dts/am335x-pcm-953.dtsi +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -63,14 +63,14 @@ label = "home"; linux,code = ; gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; - gpio-key,wakeup; + wakeup-source; }; button@1 { label = "menu"; linux,code = ; gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; - gpio-key,wakeup; + wakeup-source; }; }; -- cgit v1.2.3 From 9e10889a3177340dcda7d29c6d8fbd97247b007b Mon Sep 17 00:00:00 2001 From: Romain Izard Date: Fri, 17 Feb 2017 16:12:50 +0100 Subject: Revert "ARM: at91/dt: sama5d2: Use new compatible for ohci node" This reverts commit cab43282682e ("ARM: at91/dt: sama5d2: Use new compatible for ohci node") It depends from commit 7150bc9b4d43 ("usb: ohci-at91: Forcibly suspend ports while USB suspend") which was reverted and implemented differently. With the new implementation, the compatible string must remain the same. The compatible string introduced by this commit has been used in the default SAMA5D2 dtsi starting from Linux 4.8. As it has never been working correctly in an official release, removing it should not be breaking the stability rules. Fixes: cab43282682e ("ARM: at91/dt: sama5d2: Use new compatible for ohci node") Signed-off-by: Romain Izard cc: Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/sama5d2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 22332be72140..528b4e9c6d3d 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -266,7 +266,7 @@ }; usb1: ohci@00400000 { - compatible = "atmel,sama5d2-ohci", "usb-ohci"; + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00400000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; -- cgit v1.2.3 From e51b999e11b84a766d78347afe9287e2c5b91c97 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Wed, 8 Feb 2017 15:37:11 -0500 Subject: ARM: dts: BCM5301X: Fix UARTs on bcm953012k The UARTs are outputting garbage on the console. This is due to a speed issue. We can simply use the clock speed (which is now defined in the DTSI file) and everything works fine. Signed-off-by: Jon Mason Fixes: cdc36b22 ("ARM: dts: enable clock support for BCM5301X") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm953012k.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index bfd923096a8c..da5aa8f5ffa7 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -53,10 +53,9 @@ }; &uart0 { - clock-frequency = <62499840>; + status = "okay"; }; &uart1 { - clock-frequency = <62499840>; status = "okay"; }; -- cgit v1.2.3 From 88d1fa70c21d7b431386cfe70cdc514d98b0c9c4 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Wed, 8 Feb 2017 15:37:12 -0500 Subject: ARM: dts: BCM5301X: Fix memory start address Memory starts at 0x80000000, not 0. 0 "works" due to mirrior of the first 128M of RAM to that address. Anything greater than 128M will quickly find nothing there. Correcting the starting address has everything working again. Signed-off-by: Jon Mason Fixes: 7eb05f6d ("ARM: dts: bcm5301x: Add BCM SVK DT files") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm953012k.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index da5aa8f5ffa7..ae31a5826e91 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -48,7 +48,7 @@ }; memory { - reg = <0x00000000 0x10000000>; + reg = <0x80000000 0x10000000>; }; }; -- cgit v1.2.3 From 0c2bf9f95983fe30aa2f6463cb761cd42c2d521a Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Thu, 2 Mar 2017 19:21:32 -0500 Subject: ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit GIC_PPI flags were misconfigured for the timers, resulting in errors like: [ 0.000000] GIC: PPI11 is secure or misconfigured Changing them to being edge triggered corrects the issue Suggested-by: Rafał Miłecki Signed-off-by: Jon Mason Fixes: d27509f1 ("ARM: BCM5301X: add dts files for BCM4708 SoC") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm5301x.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 4fbb089cf5ad..00de62dc0042 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -66,14 +66,14 @@ timer@20200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x20200 0x100>; - interrupts = ; + interrupts = ; clocks = <&periph_clk>; }; local-timer@20600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x20600 0x100>; - interrupts = ; + interrupts = ; clocks = <&periph_clk>; }; -- cgit v1.2.3 From 39319f504b5d91e853f5ec7753a56e43915fcaf4 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 30 Nov 2016 12:05:03 +0100 Subject: ARM: sun8i: Fix the mali clock rate The Mali clock rate was improperly assumed to be 408MHz, while it was really 384Mhz, 408MHz being the "extreme" frequency, and definitely not stable. Switch for the stable, correct frequency for the GPU. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a23-a33.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index a952cc0703cc..8a3ed21cb7bc 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -495,7 +495,7 @@ resets = <&ccu RST_BUS_GPU>; assigned-clocks = <&ccu CLK_GPU>; - assigned-clock-rates = <408000000>; + assigned-clock-rates = <384000000>; }; gic: interrupt-controller@01c81000 { -- cgit v1.2.3 From 12aff99723901bcc0e2a6a34343a4f62c371fdd9 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 7 Feb 2017 17:14:14 -0200 Subject: ARM: dts: imx6sx-udoo-neo: Fix reboot hang After issuing a 'reboot' command the imx6sx-udoo-neo board does not reboot as expected and it just hangs instead. In mainline kernel only LDO enabled mode is supported. Do not provide arm-supply/soc-supply nodes in the device tree, so that the board operates in LDO enabled mode and can then successfully reboot via watchdog. Fixes: 76e691fc7653b85d39 ("ARM: dts: imx6sx: Add UDOO Neo support") Signed-off-by: Fabio Estevam Tested-by: Breno Lima Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi index 49f466fe0b1d..dcfc97591433 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi +++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi @@ -121,11 +121,6 @@ }; }; -&cpu0 { - arm-supply = <&sw1a_reg>; - soc-supply = <&sw1c_reg>; -}; - &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; -- cgit v1.2.3 From 9aea151f282df2b82a44fd7058a239334437c266 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 26 Feb 2017 01:02:09 +0100 Subject: ARM: dts: add the AB8500 clocks to the device tree This adds the AB8500 clocks to the device tree using the new bindings from the clk subsystem, making audio work again. Cc: Lee Jones Cc: Ulf Hansson Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/boot/dts/ste-dbx5x0.dtsi | 19 +++++++++++++++++++ arch/arm/boot/dts/ste-href.dtsi | 9 --------- arch/arm/boot/dts/ste-snowball.dts | 9 --------- 3 files changed, 19 insertions(+), 18 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 82d8c4771293..162e1eb5373d 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -14,6 +14,7 @@ #include #include #include +#include #include "skeleton.dtsi" / { @@ -603,6 +604,11 @@ interrupt-controller; #interrupt-cells = <2>; + ab8500_clock: clock-controller { + compatible = "stericsson,ab8500-clk"; + #clock-cells = <1>; + }; + ab8500_gpio: ab8500-gpio { compatible = "stericsson,ab8500-gpio"; gpio-controller; @@ -686,6 +692,8 @@ ab8500-pwm { compatible = "stericsson,ab8500-pwm"; + clocks = <&ab8500_clock AB8500_SYSCLK_INT>; + clock-names = "intclk"; }; ab8500-debugfs { @@ -700,6 +708,9 @@ V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>; V-DMIC-supply = <&ab8500_ldo_dmic_reg>; + clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>; + clock-names = "audioclk"; + stericsson,earpeice-cmv = <950>; /* Units in mV. */ }; @@ -1095,6 +1106,14 @@ status = "disabled"; }; + sound { + compatible = "stericsson,snd-soc-mop500"; + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>; + clock-names = "sysclk", "ulpclk", "intclk"; + }; + msp0: msp@80123000 { compatible = "stericsson,ux500-msp-i2s"; reg = <0x80123000 0x1000>; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index f37f9e10713c..9e359e4f342e 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -186,15 +186,6 @@ status = "okay"; }; - sound { - compatible = "stericsson,snd-soc-mop500"; - - stericsson,cpu-dai = <&msp1 &msp3>; - stericsson,audio-codec = <&codec>; - clocks = <&prcmu_clk PRCMU_SYSCLK>; - clock-names = "sysclk"; - }; - msp0: msp@80123000 { pinctrl-names = "default"; pinctrl-0 = <&msp0_default_mode>; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index dd5514def604..ade1d0d4e5f4 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -159,15 +159,6 @@ "", "", "", "", "", "", "", ""; }; - sound { - compatible = "stericsson,snd-soc-mop500"; - - stericsson,cpu-dai = <&msp1 &msp3>; - stericsson,audio-codec = <&codec>; - clocks = <&prcmu_clk PRCMU_SYSCLK>; - clock-names = "sysclk"; - }; - msp0: msp@80123000 { pinctrl-names = "default"; pinctrl-0 = <&msp0_default_mode>; -- cgit v1.2.3 From acfa28b3649ec07775efaac0c00de2db39d71634 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Wed, 1 Mar 2017 18:02:28 -0500 Subject: ARM: dts: NSP: GPIO reboot open-source The libgpio code pre-sets the GPIO values for the gpio-reset in the device tree. This results in the device being reset during bringup. To prevent this pre-setting, use the "open-source" flag in the device tree. Signed-off-by: Jon Mason Fixes: b1aaf88 ("ARM: dts: NSP: Add GPIO reboot method to bcm958625hr DTS file") Fixes: 10baed1 ("ARM: dts: NSP: Add GPIO reboot method to bcm958625xmc DTS file") Fixes: 088e3148 ("ARM: dts: NSP: Add new DT file for bcm958522er") Fixes: e3227c1 ("ARM: dts: NSP: Add new DT file for bcm958525er") Fixes: 2f8bc00 ("ARM: dts: NSP: Add new DT file for bcm958622hr") Fixes: d454c37 ("ARM: dts: NSP: Add new DT file for bcm958623hr") Fixes: f27eacf ("ARM: dts: NSP: Add new DT file for bcm988312hr") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm958522er.dts | 1 + arch/arm/boot/dts/bcm958525er.dts | 1 + arch/arm/boot/dts/bcm958525xmc.dts | 1 + arch/arm/boot/dts/bcm958622hr.dts | 1 + arch/arm/boot/dts/bcm958623hr.dts | 1 + arch/arm/boot/dts/bcm958625hr.dts | 1 + arch/arm/boot/dts/bcm988312hr.dts | 1 + 7 files changed, 7 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index 3f04a40eb90c..df05e7f568af 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index 9fd542200d3d..4a3ab19c6281 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index 41e7fd350fcd..81f78435d8c7 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 31 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index 477c4860db52..c88b8fefcb2f 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index c0a499d5ba44..d503fa0dde31 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index f7eb5854a224..cc0363b843c1 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index 16666324fda8..74e15a3cd9f8 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; -- cgit v1.2.3 From 0cdefd5b5485ee6eb3512a75739d09a4090176ed Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sat, 18 Mar 2017 21:53:20 -0700 Subject: ARM: dts: sun7i: lamobo-r1: Fix CPU port RGMII settings The CPU port of the BCM53125 is configured with RGMII (no delays) but this should actually be RGMII with transmit delay (rgmii-txid) because STMMAC takes care of inserting the transmitter delay. This fixes occasional packet loss encountered. Fixes: d7b9eaff5f0c ("ARM: dts: sun7i: Add BCM53125 switch nodes to the lamobo-r1 board") Reported-by: Hartmut Knaack Signed-off-by: Florian Fainelli Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index 72ec0d5ae052..bbf1c8cbaac6 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -167,7 +167,7 @@ reg = <8>; label = "cpu"; ethernet = <&gmac>; - phy-mode = "rgmii"; + phy-mode = "rgmii-txid"; fixed-link { speed = <1000>; full-duplex; -- cgit v1.2.3 From 9693219aa61dc7a75ac015e5c011e889cb821eec Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Sat, 18 Mar 2017 05:23:15 +0800 Subject: ARM: sun8i: a23/a33: drop bl_en_pin GPIO pinmux in reference design DTSI The bl_en_pin GPIO pinmux is configured as "gpio_in", which makes it conflicts with the real GPIO usage (out), and makes the backlight not usable. Drop the GPIO pinmux for it, thus this GPIO can be correctly used. Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi index 7097c18ff487..d6bd15898db6 100644 --- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi @@ -50,8 +50,6 @@ backlight: backlight { compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin>; pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; @@ -93,11 +91,6 @@ }; &pio { - bl_en_pin: bl_en_pin@0 { - pins = "PH6"; - function = "gpio_in"; - }; - mmc0_cd_pin: mmc0_cd_pin@0 { pins = "PB4"; function = "gpio_in"; -- cgit v1.2.3