From bf05c2c2c5586242509660d146a5bb5f73dd06c5 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 12 Nov 2015 09:32:57 +0200 Subject: ARM: dts: dra7: Fix McASP3 node regarding to clocks McASP node needs to list all mandatory clocks: gfclk and ahclkx Signed-off-by: Peter Ujfalusi Tested-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index bc672fb91466..fe99231cbde5 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1459,8 +1459,8 @@ interrupt-names = "tx", "rx"; dmas = <&sdma_xbar 133>, <&sdma_xbar 132>; dma-names = "tx", "rx"; - clocks = <&mcasp3_ahclkx_mux>; - clock-names = "fck"; + clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>; + clock-names = "fck", "ahclkx"; status = "disabled"; }; -- cgit v1.2.3 From f67d84690d8c291bc08c4635e17df9a200d2c4d1 Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Thu, 5 Nov 2015 15:40:48 +0800 Subject: ARM: at91/dt: sama5d4: change watchdog compatible Change the watchdog compatible to "atmel,sama5d4-wdt" to support SAMA5D4 watchdog driver. Signed-off-by: Wenyou Yang Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/sama5d4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 15bbaf690047..2193637b9cd2 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1300,7 +1300,7 @@ }; watchdog@fc068640 { - compatible = "atmel,at91sam9260-wdt"; + compatible = "atmel,sama5d4-wdt"; reg = <0xfc068640 0x10>; clocks = <&clk32k>; status = "disabled"; -- cgit v1.2.3 From 67ae8b9b7898b4587922a973f4735e64b7271314 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Wed, 21 Oct 2015 11:10:07 +0100 Subject: ARM: at91/dt: replace gpio-key,wakeup with wakeup-source property Though the keyboard driver for GPIO buttons(gpio-keys) will continue to check for/support the legacy "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup source, "wakeup-source" is the new standard binding. This patch replaces the legacy "gpio-key,wakeup" with the unified "wakeup-source" property in order to avoid any futher copy-paste duplication. Cc: Alexandre Belloni Cc: Jean-Christophe Plagniol-Villard Signed-off-by: Sudeep Holla Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/animeo_ip.dts | 6 +++--- arch/arm/boot/dts/at91-foxg20.dts | 2 +- arch/arm/boot/dts/at91-kizbox.dts | 4 ++-- arch/arm/boot/dts/at91-kizbox2.dts | 6 +++--- arch/arm/boot/dts/at91-kizboxmini.dts | 4 ++-- arch/arm/boot/dts/at91-qil_a9260.dts | 2 +- arch/arm/boot/dts/at91-sama5d3_xplained.dts | 2 +- arch/arm/boot/dts/at91-sama5d4_xplained.dts | 2 +- arch/arm/boot/dts/at91-sama5d4ek.dts | 2 +- arch/arm/boot/dts/at91sam9261ek.dts | 10 +++++----- arch/arm/boot/dts/at91sam9263ek.dts | 4 ++-- arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 4 ++-- arch/arm/boot/dts/at91sam9m10g45ek.dts | 4 ++-- arch/arm/boot/dts/at91sam9n12ek.dts | 2 +- arch/arm/boot/dts/at91sam9rlek.dts | 4 ++-- arch/arm/boot/dts/sama5d35ek.dts | 2 +- arch/arm/boot/dts/usb_a9260_common.dtsi | 2 +- arch/arm/boot/dts/usb_a9263.dts | 2 +- 18 files changed, 32 insertions(+), 32 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 4e0ad3b82796..0962f2fa3f6e 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -155,21 +155,21 @@ label = "keyswitch_in"; gpios = <&pioB 1 GPIO_ACTIVE_HIGH>; linux,code = <28>; - gpio-key,wakeup; + wakeup-source; }; error_in { label = "error_in"; gpios = <&pioB 2 GPIO_ACTIVE_HIGH>; linux,code = <29>; - gpio-key,wakeup; + wakeup-source; }; btn { label = "btn"; gpios = <&pioC 23 GPIO_ACTIVE_HIGH>; linux,code = <31>; - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts index f89598af4c2b..6bf873e7d96c 100644 --- a/arch/arm/boot/dts/at91-foxg20.dts +++ b/arch/arm/boot/dts/at91-foxg20.dts @@ -159,7 +159,7 @@ label = "Button"; gpios = <&pioC 4 GPIO_ACTIVE_LOW>; linux,code = <0x103>; - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index bf18ece0c027..8afe35f64034 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -94,14 +94,14 @@ label = "PB_RST"; gpios = <&pioB 30 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; user { label = "PB_USER"; gpios = <&pioB 31 GPIO_ACTIVE_HIGH>; linux,code = <0x101>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts index f0b1563cb3f1..50a14568f094 100644 --- a/arch/arm/boot/dts/at91-kizbox2.dts +++ b/arch/arm/boot/dts/at91-kizbox2.dts @@ -171,21 +171,21 @@ label = "PB_PROG"; gpios = <&pioE 27 GPIO_ACTIVE_LOW>; linux,code = <0x102>; - gpio-key,wakeup; + wakeup-source; }; reset { label = "PB_RST"; gpios = <&pioE 29 GPIO_ACTIVE_LOW>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; user { label = "PB_USER"; gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; linux,code = <0x101>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts index 9f72b4932634..9682d105d4d8 100644 --- a/arch/arm/boot/dts/at91-kizboxmini.dts +++ b/arch/arm/boot/dts/at91-kizboxmini.dts @@ -98,14 +98,14 @@ label = "PB_PROG"; gpios = <&pioC 17 GPIO_ACTIVE_LOW>; linux,code = <0x102>; - gpio-key,wakeup; + wakeup-source; }; reset { label = "PB_RST"; gpios = <&pioC 16 GPIO_ACTIVE_LOW>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts index a9aef53ab764..4f2eebf4a560 100644 --- a/arch/arm/boot/dts/at91-qil_a9260.dts +++ b/arch/arm/boot/dts/at91-qil_a9260.dts @@ -183,7 +183,7 @@ label = "user_pb"; gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 8488ac53d22d..ff888d21c786 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -315,7 +315,7 @@ label = "PB_USER"; gpios = <&pioE 29 GPIO_ACTIVE_LOW>; linux,code = <0x104>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 45371a1b61b3..776a877d4072 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -235,7 +235,7 @@ label = "pb_user1"; gpios = <&pioE 8 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 6d272c0125e3..b60ce3a81902 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -304,7 +304,7 @@ label = "pb_user1"; gpios = <&pioE 13 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 2e92ac020f23..facce0ef840b 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -149,7 +149,7 @@ ti,debounce-tol = /bits/ 16 <65535>; ti,debounce-max = /bits/ 16 <1>; - linux,wakeup; + wakeup-source; }; }; @@ -193,28 +193,28 @@ label = "button_0"; gpios = <&pioA 27 GPIO_ACTIVE_LOW>; linux,code = <256>; - gpio-key,wakeup; + wakeup-source; }; button_1 { label = "button_1"; gpios = <&pioA 26 GPIO_ACTIVE_LOW>; linux,code = <257>; - gpio-key,wakeup; + wakeup-source; }; button_2 { label = "button_2"; gpios = <&pioA 25 GPIO_ACTIVE_LOW>; linux,code = <258>; - gpio-key,wakeup; + wakeup-source; }; button_3 { label = "button_3"; gpios = <&pioA 24 GPIO_ACTIVE_LOW>; linux,code = <259>; - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 23381276ffb8..241de040681f 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -213,14 +213,14 @@ label = "left_click"; gpios = <&pioC 5 GPIO_ACTIVE_LOW>; linux,code = <272>; - gpio-key,wakeup; + wakeup-source; }; right_click { label = "right_click"; gpios = <&pioC 4 GPIO_ACTIVE_LOW>; linux,code = <273>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 57548a2c5a1e..e45c744d3cc8 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -206,14 +206,14 @@ label = "Button 3"; gpios = <&pioA 30 GPIO_ACTIVE_LOW>; linux,code = <0x103>; - gpio-key,wakeup; + wakeup-source; }; btn4 { label = "Button 4"; gpios = <&pioA 31 GPIO_ACTIVE_LOW>; linux,code = <0x104>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 9d16ef8453c5..021a634ca02f 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -323,14 +323,14 @@ label = "left_click"; gpios = <&pioB 6 GPIO_ACTIVE_LOW>; linux,code = <272>; - gpio-key,wakeup; + wakeup-source; }; right_click { label = "right_click"; gpios = <&pioB 7 GPIO_ACTIVE_LOW>; linux,code = <273>; - gpio-key,wakeup; + wakeup-source; }; left { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index acf3451a332d..6bf4f71dc2fa 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -219,7 +219,7 @@ label = "Enter"; gpios = <&pioB 3 GPIO_ACTIVE_LOW>; linux,code = <28>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index 558c9f220bed..8a847c2d8e42 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -225,14 +225,14 @@ label = "right_click"; gpios = <&pioB 0 GPIO_ACTIVE_LOW>; linux,code = <273>; - gpio-key,wakeup; + wakeup-source; }; left_click { label = "left_click"; gpios = <&pioB 1 GPIO_ACTIVE_LOW>; linux,code = <272>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts index d9a9aca1ccfd..e812f5c1bf70 100644 --- a/arch/arm/boot/dts/sama5d35ek.dts +++ b/arch/arm/boot/dts/sama5d35ek.dts @@ -49,7 +49,7 @@ label = "pb_user1"; gpios = <&pioE 27 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi index 12edafefd44a..9beea8976584 100644 --- a/arch/arm/boot/dts/usb_a9260_common.dtsi +++ b/arch/arm/boot/dts/usb_a9260_common.dtsi @@ -115,7 +115,7 @@ label = "user_pb"; gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index 68c0de36c339..8cc6edb29694 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -143,7 +143,7 @@ label = "user_pb"; gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; - gpio-key,wakeup; + wakeup-source; }; }; -- cgit v1.2.3 From 15f7e2537a164a9a19861b67aa4368297f8b00bb Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Wed, 4 Nov 2015 16:15:48 +0100 Subject: ARM: at91/dt: remove leftovers clock definition The clocks group properties and the clock@0 node are useless, remove them to avoid copy pasting in future device trees. Signed-off-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91-kizbox.dts | 9 --------- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 9 --------- arch/arm/boot/dts/at91-sama5d4_xplained.dts | 9 --------- arch/arm/boot/dts/at91-sama5d4ek.dts | 9 --------- arch/arm/boot/dts/at91rm9200ek.dts | 9 --------- arch/arm/boot/dts/at91sam9261ek.dts | 9 --------- arch/arm/boot/dts/at91sam9263ek.dts | 9 --------- arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 9 --------- arch/arm/boot/dts/at91sam9m10g45ek.dts | 9 --------- arch/arm/boot/dts/at91sam9n12ek.dts | 9 --------- arch/arm/boot/dts/at91sam9rlek.dts | 9 --------- arch/arm/boot/dts/at91sam9x5cm.dtsi | 11 ----------- 12 files changed, 110 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index 8afe35f64034..229e989eb60d 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -24,15 +24,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - main_xtal { clock-frequency = <18432000>; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index e07c2b206beb..28eaf41d59da 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -59,15 +59,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 776a877d4072..7228fc7f414d 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -59,15 +59,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index b60ce3a81902..df75c5d74649 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -59,15 +59,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index 8dab4b75ca97..f90e1c2d3caa 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -21,15 +21,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index facce0ef840b..55bd51f07fa6 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -22,15 +22,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 241de040681f..59df9d73d276 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -22,15 +22,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <16367660>; - }; - slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index e45c744d3cc8..e9cc99b6353a 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -19,15 +19,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 021a634ca02f..2400c99134f7 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -24,15 +24,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 6bf4f71dc2fa..ca4ddf86817a 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -23,15 +23,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <16000000>; - }; - slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index 8a847c2d8e42..f10566f759cd 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -22,15 +22,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 26112ebd15fc..b098ad8cd93a 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -12,17 +12,6 @@ reg = <0x20000000 0x8000000>; }; - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - }; - clocks { slow_xtal { clock-frequency = <32768>; -- cgit v1.2.3 From 1392f7c905e80361f57977e4c0f37f0a5d44e597 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Wed, 4 Nov 2015 16:15:49 +0100 Subject: ARM: at91/dt: remove bootargs Passing earlyprintk in the bootargs may crash the board as it depends on having a sane DEBUG_UART_PHYS configured which is not always the case. Also remove ignore_loglevel Signed-off-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91-sama5d4_xplained.dts | 1 - arch/arm/boot/dts/at91-sama5d4ek.dts | 1 - 2 files changed, 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 7228fc7f414d..131614f28e75 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -50,7 +50,6 @@ compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5"; chosen { - bootargs = "ignore_loglevel earlyprintk"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index df75c5d74649..2d4a33100af6 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -50,7 +50,6 @@ compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5"; chosen { - bootargs = "ignore_loglevel earlyprintk"; stdout-path = "serial0:115200n8"; }; -- cgit v1.2.3 From 13e2a6fd319b2d07ca8d26b489164154356b5e91 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Fri, 16 Oct 2015 15:04:45 +0200 Subject: ARM: at91/dt: sama5d2 Xplained: add several devices Add sdmmc and flexcom devices Signed-off-by: Ludovic Desroches Signed-off-by: Cyrille Pitchen Acked-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 106 ++++++++++++++++++++++++++++ 1 file changed, 106 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 28eaf41d59da..ad6de73ed5a5 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -45,6 +45,7 @@ /dts-v1/; #include "sama5d2.dtsi" #include "sama5d2-pinfunc.h" +#include / { model = "Atmel SAMA5D2 Xplained"; @@ -82,6 +83,22 @@ status = "okay"; }; + sdmmc0: sdio-host@a0000000 { + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + non-removable; + mmc-ddr-1_8v; + status = "okay"; + }; + + sdmmc1: sdio-host@b0000000 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc1_default>; + status = "okay"; /* conflict with qspi0 */ + }; + apb { spi0: spi@f8000000 { pinctrl-names = "default"; @@ -172,12 +189,49 @@ }; }; + flx0: flexcom@f8034000 { + atmel,flexcom-mode = ; + status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ + + uart5: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&flx0_clk>; + clock-names = "usart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx0_default>; + atmel,fifo-size = <32>; + status = "okay"; + }; + }; + uart3: serial@fc008000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3_default>; status = "okay"; }; + flx4: flexcom@fc018000 { + atmel,flexcom-mode = ; + status = "okay"; + + i2c2: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <0>, <0>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&flx4_clk>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx4_default>; + atmel,fifo-size = <16>; + status = "okay"; + }; + }; + i2c1: i2c@fc028000 { dmas = <0>, <0>; pinctrl-names = "default"; @@ -192,6 +246,18 @@ }; pinctrl@fc038000 { + pinctrl_flx0_default: flx0_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_flx4_default: flx4_default { + pinmux = , + ; + bias-disable; + }; + pinctrl_i2c0_default: i2c0_default { pinmux = , ; @@ -218,6 +284,46 @@ bias-disable; }; + pinctrl_sdmmc0_default: sdmmc0_default { + cmd_data { + pinmux = , + , + , + , + , + , + , + , + ; + bias-pull-up; + }; + + ck_cd_rstn_vddsel { + pinmux = , + , + , + ; + bias-disable; + }; + }; + + pinctrl_sdmmc1_default: sdmmc1_default { + cmd_data { + pinmux = , + , + , + , + ; + bias-pull-up; + }; + + conf-ck_cd { + pinmux = , + ; + bias-disable; + }; + }; + pinctrl_spi0_default: spi0_default { pinmux = , , -- cgit v1.2.3 From c65d2359a85da9a09768c75ea6b9ed6254a7df71 Mon Sep 17 00:00:00 2001 From: Karsten Merker Date: Sat, 24 Oct 2015 23:07:31 +0200 Subject: ARM: dts: sunxi: sun6i-a31s-primo81.dts: add touchscreen axis swapping property The MSI Primo81 has a display in portrait mode but a touchscreen in landscape mode. To have both of them use the same coordinate system, the touchscreen-swapped-x-y property has to be set for the touchscreen. Signed-off-by: Karsten Merker Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31s-primo81.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 2d4250b1faf8..68b479b8772c 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -83,6 +83,7 @@ reg = <0x5d>; interrupt-parent = <&pio>; interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */ + touchscreen-swapped-x-y; }; }; -- cgit v1.2.3 From 984926781122f034d5bc9962815d135b6c4a8e1d Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 11 Nov 2015 22:08:02 +0100 Subject: ARM: dts: rockchip: temporarily remove emmc hs200 speed from rk3288 minnie The eMMC of the minnie Chromebook doesn't like our current method of tuning and while there are solutions on the horizon, they still need investigating. Other Chromebooks tune just fine with the emmc, so simply disable tuning on Minnie for now. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-veyron-minnie.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 8fd8ef2c72da..85f0373df498 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -86,6 +86,10 @@ }; }; +&emmc { + /delete-property/mmc-hs200-1_8v; +}; + &gpio_keys { pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>; -- cgit v1.2.3 From 784359b824bf2b095b257eefcd9615a3c48f2d8a Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Fri, 23 Oct 2015 19:25:28 +0800 Subject: ARM: dts: rockchip: Add OTP gpio pinctrl to rk3288 tsadc node Add the "init" anf "sleep" pinctrl as the OTP gpio state. We need the OTP pin is gpio state before resetting the TSADC controller, since the tshut polarity will generate a high signal. "init" pinctrl property is defined by Doug's Patch[0]. Patch[0]: https://patchwork.kernel.org/patch/7454311/ Signed-off-by: Caesar Wang Reviewed-by: Douglas Anderson Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 6a79c9c526b8..04ea209f1737 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -452,8 +452,10 @@ clock-names = "tsadc", "apb_pclk"; resets = <&cru SRST_TSADC>; reset-names = "tsadc-apb"; - pinctrl-names = "default"; - pinctrl-0 = <&otp_out>; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_gpio>; #thermal-sensor-cells = <1>; rockchip,hw-tshut-temp = <95000>; status = "disabled"; @@ -1395,6 +1397,10 @@ }; tsadc { + otp_gpio: otp-gpio { + rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>; + }; + otp_out: otp-out { rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>; }; -- cgit v1.2.3 From 5442f0eadf2885453d5b2ed8c8592f32a3744f8e Mon Sep 17 00:00:00 2001 From: Helmut Klein Date: Wed, 11 Nov 2015 15:03:04 +0100 Subject: ARM: dts: Kirkwood: Fix QNAP TS219 power-off The "reg" entry in the "poweroff" section of "kirkwood-ts219.dtsi" addressed the wrong uart (0 = console). This patch changes the address to select uart 1, which is the uart connected to the pic microcontroller, which can switch the device off. Signed-off-by: Helmut Klein Signed-off-by: Andrew Lunn Fixes: 4350a47bbac3 ("ARM: Kirkwood: Make use of the QNAP Power off driver.") Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/kirkwood-ts219.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index c56ab6bbfe3c..0e46560551f4 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -40,7 +40,7 @@ }; poweroff@12100 { compatible = "qnap,power-off"; - reg = <0x12000 0x100>; + reg = <0x12100 0x100>; clocks = <&gate_clk 7>; }; spi@10600 { -- cgit v1.2.3 From 3fa2f9496554bc23eb62f958c920e9fcee7ba232 Mon Sep 17 00:00:00 2001 From: Sanchayan Maity Date: Sun, 18 Oct 2015 11:18:48 +0530 Subject: ARM: dts: vfxxx: Fix erroneous property in esdhc0 node Something seems to have gone wrong during the merging of the device tree changes with the following patch "ARM: dts: add property for maximum ADC clock frequencies" The property "fsl,adck-max-frequency" instead of being applied for the ADC1 node got applied to the esdhc0 node. This patch fixes it. Signed-off-by: Sanchayan Maity Fixes: def0641e2f61 ("ARM: dts: add property for maximum ADC clock frequencies") Cc: Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vfxxx.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 6736bae43a5b..a64bfe1a4dd9 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -461,6 +461,8 @@ clock-names = "adc"; #io-channel-cells = <1>; status = "disabled"; + fsl,adck-max-frequency = <30000000>, <40000000>, + <20000000>; }; esdhc0: esdhc@400b1000 { @@ -472,8 +474,6 @@ <&clks VF610_CLK_ESDHC0>; clock-names = "ipg", "ahb", "per"; status = "disabled"; - fsl,adck-max-frequency = <30000000>, <40000000>, - <20000000>; }; esdhc1: esdhc@400b2000 { -- cgit v1.2.3 From 17e846aa390d89adae053d9d2ba8acb286b64af7 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Mon, 23 Nov 2015 10:35:25 -0800 Subject: ARM: dts: keystone: k2l: fix kernel crash when clk_ignore_unused is not in bootargs Currently kernel crash randomly when K2L EVM is booted without clk_ignore_unused in the bootargs. This workaround is not needed on other K2 devices such as K2HK and K2E and with this fix, we can remove the workaround altogether. netcp driver on K2L uses linked ram on OSR (On chip Static RAM) and requires the clock to this peripheral enabled for proper functioning. This is the reason for the kernel crash. So add the clock node to fix this issue. While at it, remove the workaround documentation as well. With the fix applied, clk_summary dump shows the clock to OSR enabled. cat /sys/kernel/debug/clk/clk_summary ------cut-------------- tcp3d-1 0 0 399360000 0 0 tcp3d-0 0 0 399360000 0 0 osr 1 1 399360000 0 0 fftc-0 0 0 399360000 0 0 -----cut---------------- Signed-off-by: Murali Karicheri Signed-off-by: Santosh Shilimkar --- Documentation/arm/keystone/Overview.txt | 18 ------------------ arch/arm/boot/dts/k2l-netcp.dtsi | 2 +- 2 files changed, 1 insertion(+), 19 deletions(-) (limited to 'arch/arm/boot') diff --git a/Documentation/arm/keystone/Overview.txt b/Documentation/arm/keystone/Overview.txt index f17bc4c9dff9..400c0c270d2e 100644 --- a/Documentation/arm/keystone/Overview.txt +++ b/Documentation/arm/keystone/Overview.txt @@ -49,24 +49,6 @@ specified through DTS. Following are the DTS used:- The device tree documentation for the keystone machines are located at Documentation/devicetree/bindings/arm/keystone/keystone.txt -Known issues & workaround -------------------------- - -Some of the device drivers used on keystone are re-used from that from -DaVinci and other TI SoCs. These device drivers may use clock APIs directly. -Some of the keystone specific drivers such as netcp uses run time power -management API instead to enable clock. As this API has limitations on -keystone, following workaround is needed to boot Linux. - - Add 'clk_ignore_unused' to the bootargs env variable in u-boot. Otherwise - clock frameworks will try to disable clocks that are unused and disable - the hardware. This is because netcp related power domain and clock - domains are enabled in u-boot as run time power management API currently - doesn't enable clocks for netcp due to a limitation. This workaround is - expected to be removed in the future when proper API support becomes - available. Until then, this work around is needed. - - Document Author --------------- Murali Karicheri diff --git a/arch/arm/boot/dts/k2l-netcp.dtsi b/arch/arm/boot/dts/k2l-netcp.dtsi index 01aef230773d..5acbd0dcc2ab 100644 --- a/arch/arm/boot/dts/k2l-netcp.dtsi +++ b/arch/arm/boot/dts/k2l-netcp.dtsi @@ -137,7 +137,7 @@ netcp: netcp@26000000 { /* NetCP address range */ ranges = <0 0x26000000 0x1000000>; - clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>; + clocks = <&clkosr>, <&papllclk>, <&clkcpgmac>, <&chipclk12>; dma-coherent; ti,navigator-dmas = <&dma_gbe 0>, -- cgit v1.2.3 From 897ed0ca5979f103b8de3c09bcca2ae4860eb5a5 Mon Sep 17 00:00:00 2001 From: Cory Tusar Date: Wed, 18 Nov 2015 22:54:39 -0500 Subject: ARM: dts: vfxxx: Fix dspi[01] spi-num-chipselects. Per the Vybrid Reference Manual (section 3.8.6.1), dspi0 has 6 chip select signals associated with it, while dspi1 has only 4. Signed-off-by: Cory Tusar Acked-by: Stefan Agner Cc: Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vfxxx.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index a64bfe1a4dd9..0d5acc2cdc8e 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -158,7 +158,7 @@ interrupts = <67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_DSPI0>; clock-names = "dspi"; - spi-num-chipselects = <5>; + spi-num-chipselects = <6>; status = "disabled"; }; @@ -170,7 +170,7 @@ interrupts = <68 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_DSPI1>; clock-names = "dspi"; - spi-num-chipselects = <5>; + spi-num-chipselects = <4>; status = "disabled"; }; -- cgit v1.2.3 From 51c4cfef568fe8ebac06761ed7c754fac1f9b5a8 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 11 Nov 2015 10:11:01 -0600 Subject: rtc: ds1307: fix kernel splat due to wakeup irq handling Since commit 3fffd1283927 ("i2c: allow specifying separate wakeup interrupt in device tree") we have automatic wakeup irq support for i2c devices. That commit missed the fact that rtc-1307 had its own wakeup irq handling and ended up introducing a kernel splat for at least Beagle x15 boards. Fix that by reverting original commit _and_ passing correct interrupt names on DTS so i2c-core can choose correct IRQ as wakeup. Now that we have automatic wakeirq support, we can revert the original commit which did it manually. Fixes the following warning: [ 10.346582] WARNING: CPU: 1 PID: 263 at linux/drivers/base/power/wakeirq.c:43 dev_pm_attach_wake_irq+0xbc/0xd4() [ 10.359244] rtc-ds1307 2-006f: wake irq already initialized Cc: Tony Lindgren Cc: Nishanth Menon Signed-off-by: Felipe Balbi Acked-by: Tony Lindgren Acked-by: Arnd Bergmann Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 1 + drivers/rtc/rtc-ds1307.c | 36 +++------------------------------ 2 files changed, 4 insertions(+), 33 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index d9ba6b879fc1..00352e761b8c 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -604,6 +604,7 @@ reg = <0x6f>; interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>, <&dra7_pmx_core 0x424>; + interrupt-names = "irq", "wakeup"; pinctrl-names = "default"; pinctrl-0 = <&mcp79410_pins_default>; diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index 188006c55ce0..325836818826 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -15,9 +15,6 @@ #include #include #include -#include -#include -#include #include #include #include @@ -117,7 +114,6 @@ struct ds1307 { #define HAS_ALARM 1 /* bit 1 == irq claimed */ struct i2c_client *client; struct rtc_device *rtc; - int wakeirq; s32 (*read_block_data)(const struct i2c_client *client, u8 command, u8 length, u8 *values); s32 (*write_block_data)(const struct i2c_client *client, u8 command, @@ -1146,8 +1142,6 @@ read_rtc: } if (want_irq) { - struct device_node *node = client->dev.of_node; - err = devm_request_threaded_irq(&client->dev, client->irq, NULL, irq_handler, IRQF_SHARED | IRQF_ONESHOT, @@ -1155,34 +1149,13 @@ read_rtc: if (err) { client->irq = 0; dev_err(&client->dev, "unable to request IRQ!\n"); - goto no_irq; - } - - set_bit(HAS_ALARM, &ds1307->flags); - dev_dbg(&client->dev, "got IRQ %d\n", client->irq); - - /* Currently supported by OF code only! */ - if (!node) - goto no_irq; - - err = of_irq_get(node, 1); - if (err <= 0) { - if (err == -EPROBE_DEFER) - goto exit; - goto no_irq; - } - ds1307->wakeirq = err; + } else { - err = dev_pm_set_dedicated_wake_irq(&client->dev, - ds1307->wakeirq); - if (err) { - dev_err(&client->dev, "unable to setup wakeIRQ %d!\n", - err); - goto exit; + set_bit(HAS_ALARM, &ds1307->flags); + dev_dbg(&client->dev, "got IRQ %d\n", client->irq); } } -no_irq: if (chip->nvram_size) { ds1307->nvram = devm_kzalloc(&client->dev, @@ -1226,9 +1199,6 @@ static int ds1307_remove(struct i2c_client *client) { struct ds1307 *ds1307 = i2c_get_clientdata(client); - if (ds1307->wakeirq) - dev_pm_clear_wake_irq(&client->dev); - if (test_and_clear_bit(HAS_NVRAM, &ds1307->flags)) sysfs_remove_bin_file(&client->dev.kobj, ds1307->nvram); -- cgit v1.2.3 From d3e41a9fc091bf5f5d4504aead899d73bd67d71e Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 12 Nov 2015 15:07:30 +0100 Subject: ARM: dts: add dm816x missing #mbox-cells Add missing #mbox-cells for dm816x mbox DT node. Cc: Brian Hutchinson Signed-off-by: Neil Armstrong Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dm816x.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 3c99cfa1a876..a7a34e47dadc 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -218,6 +218,7 @@ reg = <0x480c8000 0x2000>; interrupts = <77>; ti,hwmods = "mailbox"; + #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; mbox_dsp: mbox_dsp { -- cgit v1.2.3 From f1b2e7c29a52309724d13a1eb4de457406697118 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 12 Nov 2015 15:07:35 +0100 Subject: ARM: dts: add dm816x missing spi DT dma handles Add the missing SPI controller DMA handler in the dm816x DT node, only properties for the two channels on four were present. Cc: Brian Hutchinson Signed-off-by: Neil Armstrong Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dm816x.dtsi | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index a7a34e47dadc..eee636de4cd8 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -280,8 +280,11 @@ ti,spi-num-cs = <4>; ti,hwmods = "mcspi1"; dmas = <&edma 16 &edma 17 - &edma 18 &edma 19>; - dma-names = "tx0", "rx0", "tx1", "rx1"; + &edma 18 &edma 19 + &edma 20 &edma 21 + &edma 22 &edma 23>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; }; mmc1: mmc@48060000 { -- cgit v1.2.3 From 531ee1f4ea7fb5634cb79824e6df6be83596a054 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Sat, 17 Oct 2015 21:05:21 -0700 Subject: ARM: dts: vf610: fix clock definition for SAI2 So far, only the bus clock has been assigned, but in reality the SAI IP has for clock inputs. The driver has been updated to make use of the additional clock inputs by c3ecef21c3f2 ("ASoC: fsl_sai: add sai master mode support"). Due to a bug in the clock tree, the audio clock has been enabled none the less by the specified bus clock (see "ARM: imx: clk-vf610: fix SAI clock tree"), which made master mode even without the proper clock assigned working. This patch completes the clock definition for SAI2. On Vybrid, only two MCLK out of the four options are available (the first being the bus clock itself). See chapter 8.10.1.2.3 of the Vybrid Reference manual ("SAI transmitter and receiver options for MCLK selection"). Note: The audio clocks are only required in master mode. Signed-off-by: Stefan Agner Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vfxxx.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 0d5acc2cdc8e..3cd1b27f2697 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -178,8 +178,10 @@ compatible = "fsl,vf610-sai"; reg = <0x40031000 0x1000>; interrupts = <86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_SAI2>; - clock-names = "sai"; + clocks = <&clks VF610_CLK_SAI2>, + <&clks VF610_CLK_SAI2_DIV>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 0 21>, <&edma0 0 20>; -- cgit v1.2.3 From c4a25007cfccbf19e6481885af378bca5e681683 Mon Sep 17 00:00:00 2001 From: Marcin Wojtas Date: Mon, 30 Nov 2015 13:27:46 +0100 Subject: mvebu: dts: enable IP checksum with jumbo frames for Armada 38x on Port0 The Ethernet controller found in the Armada 38x SoC's family support TCP/IP checksumming with frame sizes larger than 1600 bytes, however only on port 0. This commit enables it by setting 'tx-csum-limit' to 9800B in 'ethernet@70000' node. Signed-off-by: Marcin Wojtas Signed-off-by: David S. Miller --- arch/arm/boot/dts/armada-38x.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index c6a0e9d7f1a9..e8b7f6726772 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -498,6 +498,7 @@ reg = <0x70000 0x4000>; interrupts-extended = <&mpic 8>; clocks = <&gateclk 4>; + tx-csum-limit = <9800>; status = "disabled"; }; -- cgit v1.2.3 From 863c1ca73f56d3473ff1d06357b31b0063538a96 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 17 Nov 2015 16:25:45 +0100 Subject: ARM: at91/dt: add always-on to 1.8V regulator As the SDHCI controller needs the 1.8V line to be always enabled for some eMMC configurations, set the proper "regulator-always-on" property to the board DTS files. Note that the sdhci classical regulator definitions doesn't suit our controller for this 1.8V purpose. Signed-off-by: Nicolas Ferre Acked-by: Ludovic Desroches Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index ad6de73ed5a5..e74df327cdd3 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -184,6 +184,7 @@ regulator-name = "VDD_SDHC_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; }; }; -- cgit v1.2.3 From 14054fb1da099fd89208b8b319a00e0b902c7645 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Mon, 30 Nov 2015 17:56:38 +0200 Subject: ARM: dts: am4372: fix clock source for arm twd and global timers ARM TWD and Global timer are clocked by PERIPHCLK which is MPU_CLK/2. But now they are clocked by dpll_mpu_m2_ck == MPU_CLK and, as result. Timekeeping core misbehaves. For example, execution of command "sleep 5" will take 10 sec instead of 5. Hence, fix it by adding mpu_periphclk ("fixed-factor-clock") and use it for clocking ARM TWD and Global timer (same way as on OMAP4). Cc: Tony Lindgren Cc: Felipe Balbi Cc: Tero Kristo Fixes:commit 8cbd4c2f6a99 ("arm: boot: dts: am4372: add ARM timers and SCU nodes") Signed-off-by: Grygorii Strashko Reviewed-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am4372.dtsi | 4 ++-- arch/arm/boot/dts/am43xx-clocks.dtsi | 8 ++++++++ 2 files changed, 10 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index d83ff9c9701e..de8791a4d131 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -74,7 +74,7 @@ reg = <0x48240200 0x100>; interrupts = ; interrupt-parent = <&gic>; - clocks = <&dpll_mpu_m2_ck>; + clocks = <&mpu_periphclk>; }; local_timer: timer@48240600 { @@ -82,7 +82,7 @@ reg = <0x48240600 0x100>; interrupts = ; interrupt-parent = <&gic>; - clocks = <&dpll_mpu_m2_ck>; + clocks = <&mpu_periphclk>; }; l2-cache-controller@48242000 { diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index cc88728d751d..a38af2bfbfcf 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -259,6 +259,14 @@ ti,invert-autoidle-bit; }; + mpu_periphclk: mpu_periphclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_mpu_m2_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + dpll_ddr_ck: dpll_ddr_ck { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; -- cgit v1.2.3 From 5d756147f7d356c3e85372373a0054dcf25a370e Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Mon, 7 Dec 2015 21:09:24 +0800 Subject: ARM: dts: berlin: correct BG2Q's sdhci2 2nd clock The optional 2nd clock is CLKID_SDIO. We removed CLK_IGNORE_UNUSED from CLKID_SDIO's flag, so the sdhci2 doesn't work. This patch fixes this issue by correcting the sdhci2's 2nd clock. Signed-off-by: Jisheng Zhang Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2q.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 8ea177f375dd..5b101290ff94 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -135,7 +135,7 @@ compatible = "mrvl,pxav3-mmc"; reg = <0xab1000 0x200>; interrupts = ; - clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>; + clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_SDIO>; clock-names = "io", "core"; status = "disabled"; }; -- cgit v1.2.3 From b5010d2081331e1c95358c4eb500bd30f5d532ce Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Mon, 7 Dec 2015 21:09:25 +0800 Subject: ARM: dts: berlin: add 2nd clock for BG2Q sdhci0 and sdhci1 We removed CLK_IGNORE_UNUSED from CLKID_SDIO's flag, so the sdhci0 and sdhci1 don't work. We fix this by adding the optional 2nd clock for BG2Q's sdhci0 and sdhci1. This patch brings another benefit: the 2nd clock can be disabled during runtime pm, so saves power a bit. Signed-off-by: Jisheng Zhang Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2q.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 5b101290ff94..fb1da99996ea 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -118,7 +118,8 @@ sdhci0: sdhci@ab0000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0000 0x200>; - clocks = <&chip_clk CLKID_SDIO1XIN>; + clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>; + clock-names = "io", "core"; interrupts = ; status = "disabled"; }; @@ -126,7 +127,8 @@ sdhci1: sdhci@ab0800 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0800 0x200>; - clocks = <&chip_clk CLKID_SDIO1XIN>; + clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>; + clock-names = "io", "core"; interrupts = ; status = "disabled"; }; -- cgit v1.2.3 From 9c17190595840b4ed30e8d5f286636ceb28aae4f Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Mon, 30 Nov 2015 17:59:26 -0800 Subject: ARM: dts: vf610: use reset values for L2 cache latencies Linux on Vybrid used several different L2 latencies so far, none of them seem to be the right ones. According to the application note AN4947 ("Understanding Vybrid Architecture"), the tag portion runs on CPU clock and is inside the L2 cache controller, whereas the data portion is stored in the external SRAM running on platform clock. Hence it is likely that the correct value requires a higher data latency then tag latency. These are the values which have been used so far: - The mainline values: arm,data-latency = <1 1 1>; arm,tag-latency = <2 2 2>; Those values have lead to problems on higher clocks. They look like a poor translation from the reset values (missing +1 offset and a mix up between tag/latency values). - The Linux 3.0 (SoC vendor BSP) values (converted to DT notation): arm,data-latency = <4 2 3> arm,tag-latency = <4 2 3> The cache initialization function along with the value matches the i.MX6 code from the same kernel, so it seems that those values have just been copied. - The Colibri values: arm,data-latency = <2 1 2>; arm,tag-latency = <3 2 3>; Those were a mix between the values of the Linux 3.0 based BSP and the mainline values above. - The SoC Reset values (converted to DT notation): arm,data-latency = <3 3 3>; arm,tag-latency = <2 2 2>; So far there is no official statement on what the correct values are. See also the related Freescale community thread: https://community.freescale.com/message/579785#579785 For now, the reset values seem to be the best bet. Remove all other "bogus" values and use the reset value on vf610.dtsi level. Signed-off-by: Stefan Agner Cc: Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-colibri.dtsi | 5 ----- arch/arm/boot/dts/vf610.dtsi | 2 +- 2 files changed, 1 insertion(+), 6 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index 19fe045b8334..2d7eab755210 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -18,8 +18,3 @@ reg = <0x80000000 0x10000000>; }; }; - -&L2 { - arm,data-latency = <2 1 2>; - arm,tag-latency = <3 2 3>; -}; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 5f8eb1bd782b..58bc6e448be5 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -19,7 +19,7 @@ reg = <0x40006000 0x1000>; cache-unified; cache-level = <2>; - arm,data-latency = <1 1 1>; + arm,data-latency = <3 3 3>; arm,tag-latency = <2 2 2>; }; }; -- cgit v1.2.3 From 13fdae1ae565f214f25753492783ce45cbf23532 Mon Sep 17 00:00:00 2001 From: Bai Ping Date: Wed, 9 Dec 2015 16:15:55 +0800 Subject: ARM: dts: imx: Fix the assigned-clock mismatch issue on imx6q/dl The 'assigned-clock-parents' and 'assigned-clock-rates' list should corresponding to the 'assigned-clocks' property clock list. Signed-off-by: Bai Ping Fixes: ed339363de1b ("ARM: dts: imx6qdl-sabreauto: Allow HDMI and LVDS to work simultaneously") Cc: Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 8263fc18a7d9..d354d406954d 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -113,14 +113,14 @@ &clks { assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>, <&clks IMX6QDL_PLL4_BYPASS>, - <&clks IMX6QDL_CLK_PLL4_POST_DIV>, <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_PLL4_POST_DIV>; assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>, <&clks IMX6QDL_PLL4_BYPASS_SRC>, <&clks IMX6QDL_CLK_PLL3_USB_OTG>, <&clks IMX6QDL_CLK_PLL3_USB_OTG>; - assigned-clock-rates = <0>, <0>, <24576000>; + assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>; }; &ecspi1 { -- cgit v1.2.3 From 3a35e470bc6bc4ce34c19c410ebbe4e3bbf0bafe Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Fri, 11 Dec 2015 14:22:04 +0100 Subject: ARM: dts: imx6: Fix Ethernet PHY mode on Ventana boards MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Gateworks Ventana boards seem to need "RGMII-ID" (internal delay) PHY mode, instead of simple "RGMII", for their Marvell 88E1510 transceiver. Otherwise, the Ethernet MAC doesn't work with Marvell PHY driver (TX doesn't seem to work correctly). Tested on GW5400 rev. C. This bug affects ARM Fedora 23. Signed-off-by: Krzysztof Hałasa Acked-by: Tim Harvey Cc: Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-gw5400-a.dts | 2 +- arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 58adf176425a..a51834e1dd27 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -154,7 +154,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 7b31fdb79ced..dc0cebfe22d7 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -94,7 +94,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 1b66328a8498..18cd4114a23e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -154,7 +154,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 7c51839ff934..eea90f37bbb8 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -155,7 +155,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 929e0b37bd9e..6c11a2ae35ef 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -145,7 +145,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; -- cgit v1.2.3 From 0b4d6972d7b052b23d33ff9bdbb52958664fbb26 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 18 Dec 2015 10:13:50 -0800 Subject: ARM: dts: Fix UART wakeirq for omap4 duovero parlor Looks like we're missing the wakeirq for the console uart for duovero parlor. Let's add that as without it console acess just hangs with PM enabled. Cc: Arun Bharadwaj Cc: Ash Charles Cc: Florian Vaussard Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-duovero-parlor.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index 1a78f013f37a..b75f7b2b7c4a 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -189,3 +189,7 @@ }; }; +&uart3 { + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; +}; -- cgit v1.2.3 From 80373d37bee562060ce4d3e5272b708e8db5d1fc Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Tue, 8 Dec 2015 10:26:49 +0000 Subject: ARM: tegra: Fix suspend hang on Tegra124 Chromebooks Enabling CPUFreq support for Tegra124 Chromebooks is causing the Tegra124 to hang when resuming from suspend. When CPUFreq is enabled, the CPU clock is changed from the PLLX clock to the DFLL clock during kernel boot. When resuming from suspend the CPU clock is temporarily changed back to the PLLX clock before switching back to the DFLL. If the DFLL is operating at a much lower frequency than the PLLX when we enter suspend, and so the CPU voltage rail is at a voltage too low for the CPUs to operate at the PLLX frequency, then the device will hang. Please note that the PLLX is used in the resume sequence to switch the CPU clock from the very slow 32K clock to a faster clock during early resume to speed up the resume sequence before the DFLL is resumed. Ideally, we should fix this by setting the suspend frequency so that it matches the PLLX frequency, however, that would be a bigger change. For now simply disable CPUFreq support for Tegra124 Chromebooks to avoid the hang when resuming from suspend. Fixes: 9a0baee960a7 ("ARM: tegra: Enable CPUFreq support for Tegra124 Chromebooks") Signed-off-by: Jon Hunter Signed-off-by: Olof Johansson --- arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index 40c23a0b7cfc..ec1aa64ded68 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -399,7 +399,7 @@ /* CPU DFLL clock */ clock@0,70110000 { - status = "okay"; + status = "disabled"; vdd-cpu-supply = <&vdd_cpu>; nvidia,i2c-fs-rate = <400000>; }; -- cgit v1.2.3