From 42af65e88df70a32c3c1afa0e6d35022b379c6ae Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 29 Jan 2016 11:04:39 +0100 Subject: ARM: dts: r8a7790: Add BRG support for (H)SCIF Add the device node for the external SCIF_CLK. The presence of the SCIF_CLK crystal and its clock frequency depends on the actual board. Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal resp. external clock) for the Baud Rate Generator for External Clock (BRG) to all SCIF and HSCIF device nodes. This increases the range and accuracy of supported baud rates on (H)SCIF. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index c5672745a1e5..c9583fa6cae7 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -667,8 +667,9 @@ "renesas,scif"; reg = <0 0xe6e60000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7790_CLK_SCIF0>; - clock-names = "fck"; + clocks = <&mstp7_clks R8A7790_CLK_SCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -680,8 +681,9 @@ "renesas,scif"; reg = <0 0xe6e68000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7790_CLK_SCIF1>; - clock-names = "fck"; + clocks = <&mstp7_clks R8A7790_CLK_SCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -693,8 +695,9 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>; - clock-names = "fck"; + clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -706,8 +709,9 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>; - clock-names = "fck"; + clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -996,6 +1000,15 @@ clock-output-names = "audio_clk_c"; }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* External USB clock - can be overridden by the board */ usb_extal_clk: usb_extal_clk { compatible = "fixed-clock"; -- cgit v1.2.3