From 6717f3d1286c5bb9b73a7a97f1e71333b72d82f9 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 17 Sep 2014 00:04:46 +0800 Subject: ARM: dts: sun5i: Add DT for HSG H702 tablet board This is a Q8 format 7 inch tablet with an Allwinner A13 SoC. It has 512MB DRAM, 4GB NAND flash, an accelerometer, camera, RTL8188-based WiFi, and micro SD slot for external storage. It is likely made by a subsidiary of Hanns.G (Hannstar). Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun5i-a13-hsg-h702.dts | 130 +++++++++++++++++++++++++++++++ 2 files changed, 131 insertions(+) create mode 100644 arch/arm/boot/dts/sun5i-a13-hsg-h702.dts (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index ecb55a38322d..2f42b1871a23 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -406,6 +406,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a10s-r7-tv-dongle.dtb \ + sun5i-a13-hsg-h702.dtb \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb dtb-$(CONFIG_MACH_SUN6I) += \ diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts new file mode 100644 index 000000000000..8b3cd0907b32 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -0,0 +1,130 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "sun5i-a13.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "HSG H702"; + compatible = "hsg,h702", "allwinner,sun5i-a13"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + /* + * There doesn't seem to be a GPIO for controlling + * usb1 vbus, despite the fex file saying otherwise. + */ + usb1_vbus-supply = <®_vcc5v0>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + pinctrl@01c20800 { + mmc0_cd_pin_h702: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + }; + + uart1: serial@01c28400 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; + }; +}; -- cgit v1.2.3