From 72cd7447e72a13ce72d760b42ec295430f77300a Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 17 Apr 2013 12:05:58 +0200 Subject: ARM i.MX6q: Fix periph_clk2_sel and periph2_clk2_sel clocks The periph_clk2_sel mux can be set to pll3, osc/pll1_ref_clk, or osc/ pll2_burn_in_clk. The periph2_clk2_sel mux can be set to pll3 or pll2. Signed-off-by: Philipp Zabel Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch/arm/mach-imx') diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 151259003086..ca1717135820 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -177,7 +177,8 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; -static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", }; +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", }; @@ -369,8 +370,8 @@ int __init mx6q_clocks_init(void) clk[pll1_sw] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); clk[periph_pre] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); clk[periph2_pre] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); - clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); - clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); clk[axi_sel] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels)); clk[esai_sel] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); clk[asrc_sel] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); -- cgit v1.2.3 From 0e574461c4c915a065dd75c894edb653ce99be9c Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Mon, 22 Apr 2013 08:00:34 +0200 Subject: ARM i.MX6: correct MLB clock configuration According to the i.MX6 Dual/Quad technical reference manual (Figure 18-2. Clock Tree - Part 1) the MLB clock is directly feed by the AXI_CLK_ROOT. This is called 'axi' in our code. Note that the clock of the MLB IP block on the i.MX6 is completely independent of the PLL8 (MLB PLL). The MLB PLL isn't responsible for feeding the MLB IP block with a clock. Instead, it's used internally by the MLB module to sync the bus clock in case the MLB 6-pin interface is enabled: MediaLB Control 0 Register, MLB150_MLBC0[5], MLBPEN: 1 MediaLB 6-pin interface enabled. MLB PLL and MLB PHY is enabled in this case. I.e. the PLL8 MLB PLL has to be handled by the MLB driver and isn't needed for clocking the MLB module itself. Signed-off-by: Dirk Behme CC: Jiada Wang Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-imx') diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ca1717135820..f2e1c62cf3ce 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -499,7 +499,7 @@ int __init mx6q_clocks_init(void) clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14); clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10); clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16); - clk[mlb] = imx_clk_gate2("mlb", "pll8_mlb", base + 0x74, 18); + clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18); clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20); clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22); clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28); -- cgit v1.2.3 From 087bb28329f3ccda4e50cb4cf297542d7e773e20 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 16 Apr 2013 22:11:19 +0800 Subject: ARM: imx: replicate the diagnostic register of boot cpu into secondary cores The diagnostic register holds the errata bits. Mostly bootloader does not bring up secondary cores, so that when errata bits are set in bootloader, they are set only for boot cpu. But on a SMP configuration, it should be equally done on every single core. Set up the diagnostic register for secondary cores by replicating the register from boot cpu. Signed-off-by: Shawn Guo Acked-by: Dirk Behme --- arch/arm/mach-imx/headsmp.S | 12 ++++++++++++ arch/arm/mach-imx/platsmp.c | 14 ++++++++++++++ 2 files changed, 26 insertions(+) (limited to 'arch/arm/mach-imx') diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 67b9c48dcafe..627f16f0e9d1 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -18,8 +18,20 @@ .section ".text.head", "ax" #ifdef CONFIG_SMP +diag_reg_offset: + .word g_diag_reg - . + + .macro set_diag_reg + adr r0, diag_reg_offset + ldr r1, [r0] + add r1, r1, r0 @ r1 = physical &g_diag_reg + ldr r0, [r1] + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + .endm + ENTRY(v7_secondary_startup) bl v7_invalidate_l1 + set_diag_reg b secondary_startup ENDPROC(v7_secondary_startup) #endif diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 4a69305db65e..c6e1ab544882 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -21,6 +22,7 @@ #define SCU_STANDBY_ENABLE (1 << 5) +u32 g_diag_reg; static void __iomem *scu_base; static struct map_desc scu_io_desc __initdata = { @@ -80,6 +82,18 @@ void imx_smp_prepare(void) static void __init imx_smp_prepare_cpus(unsigned int max_cpus) { imx_smp_prepare(); + + /* + * The diagnostic register holds the errata bits. Mostly bootloader + * does not bring up secondary cores, so that when errata bits are set + * in bootloader, they are set only for boot cpu. But on a SMP + * configuration, it should be equally done on every single core. + * Read the register from boot cpu here, and will replicate it into + * secondary cores when booting them. + */ + asm("mrc p15, 0, %0, c15, c0, 1" : "=r" (g_diag_reg) : : "cc"); + __cpuc_flush_dcache_area(&g_diag_reg, sizeof(g_diag_reg)); + outer_clean_range(__pa(&g_diag_reg), __pa(&g_diag_reg + 1)); } struct smp_operations imx_smp_ops __initdata = { -- cgit v1.2.3 From de78a23d73ba7f1d08f3e1aeaa0a03cb912c62a0 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 3 May 2013 10:55:46 +0800 Subject: ARM: imx: fix typo in gpu3d_shader_sels There is no clock pll2_pfd9_720m. Instead it should be pll3_pfd0_720m. Fix the typo in gpu3d_shader_sels. Signed-off-by: Shawn Guo Acked-by: Dirk Behme --- arch/arm/mach-imx/clk-imx6q.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-imx') diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index f2e1c62cf3ce..dda9a2bd3acb 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -186,7 +186,7 @@ static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd static const char *gpu_axi_sels[] = { "axi", "ahb", }; static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", }; static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; -static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", }; +static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", }; static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; -- cgit v1.2.3