From c65f2abf54a6d07260f1fa64773154e1d7047961 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 30 Mar 2012 23:37:53 -0500 Subject: ARM: remove ixp23xx and ixp2000 platforms ixp2xxx platforms have had no real changes since ~2006 and the maintainer has said on irc that they can be removed: 13:05 < nico> do you still care about ixp2000? 13:22 < lennert> not really, no 13:58 < nico> do you think we could remove it from the kernel tree? 14:01 < lennert> go for it, and remove ixp23xx too while you're at it Removing will help simplify ARM consolidation in general and PCI re-work specifically. Signed-off-by: Rob Herring Cc: Randy Dunlap Acked-by: Lennert Buytenhek --- arch/arm/mach-ixp2000/pci.c | 252 -------------------------------------------- 1 file changed, 252 deletions(-) delete mode 100644 arch/arm/mach-ixp2000/pci.c (limited to 'arch/arm/mach-ixp2000/pci.c') diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c deleted file mode 100644 index 9c02de932fac..000000000000 --- a/arch/arm/mach-ixp2000/pci.c +++ /dev/null @@ -1,252 +0,0 @@ -/* - * arch/arm/mach-ixp2000/pci.c - * - * PCI routines for IXDP2400/IXDP2800 boards - * - * Original Author: Naeem Afzal - * Maintained by: Deepak Saxena - * - * Copyright 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -static volatile int pci_master_aborts = 0; - -static int clear_master_aborts(void); - -u32 * -ixp2000_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where) -{ - u32 *paddress; - - if (PCI_SLOT(devfn) > 7) - return 0; - - /* Must be dword aligned */ - where &= ~3; - - /* - * For top bus, generate type 0, else type 1 - */ - if (!bus_nr) { - /* only bits[23:16] are used for IDSEL */ - paddress = (u32 *) (IXP2000_PCI_CFG0_VIRT_BASE - | (1 << (PCI_SLOT(devfn) + 16)) - | (PCI_FUNC(devfn) << 8) | where); - } else { - paddress = (u32 *) (IXP2000_PCI_CFG1_VIRT_BASE - | (bus_nr << 16) - | (PCI_SLOT(devfn) << 11) - | (PCI_FUNC(devfn) << 8) | where); - } - - return paddress; -} - -/* - * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes. - * 0 and 3 are not valid indexes... - */ -static u32 bytemask[] = { - /*0*/ 0, - /*1*/ 0xff, - /*2*/ 0xffff, - /*3*/ 0, - /*4*/ 0xffffffff, -}; - - -int ixp2000_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *value) -{ - u32 n; - u32 *addr; - - n = where % 4; - - addr = ixp2000_pci_config_addr(bus->number, devfn, where); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - - pci_master_aborts = 0; - *value = (*addr >> (8*n)) & bytemask[size]; - if (pci_master_aborts) { - pci_master_aborts = 0; - *value = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - return PCIBIOS_SUCCESSFUL; -} - -/* - * We don't do error checks by calling clear_master_aborts() b/c the - * assumption is that the caller did a read first to make sure a device - * exists. - */ -int ixp2000_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 value) -{ - u32 mask; - u32 *addr; - u32 temp; - - mask = ~(bytemask[size] << ((where % 0x4) * 8)); - addr = ixp2000_pci_config_addr(bus->number, devfn, where); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - temp = (u32) (value) << ((where % 0x4) * 8); - *addr = (*addr & mask) | temp; - - clear_master_aborts(); - - return PCIBIOS_SUCCESSFUL; -} - - -static struct pci_ops ixp2000_pci_ops = { - .read = ixp2000_pci_read_config, - .write = ixp2000_pci_write_config -}; - -struct pci_bus *ixp2000_pci_scan_bus(int nr, struct pci_sys_data *sysdata) -{ - return pci_scan_root_bus(NULL, sysdata->busnr, &ixp2000_pci_ops, - sysdata, &sysdata->resources); -} - - -int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - - volatile u32 temp; - unsigned long flags; - - pci_master_aborts = 1; - - local_irq_save(flags); - temp = *(IXP2000_PCI_CONTROL); - if (temp & ((1 << 8) | (1 << 5))) { - ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp); - } - - temp = *(IXP2000_PCI_CMDSTAT); - if (temp & (1 << 29)) { - while (temp & (1 << 29)) { - ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp); - temp = *(IXP2000_PCI_CMDSTAT); - } - } - local_irq_restore(flags); - - /* - * If it was an imprecise abort, then we need to correct the - * return address to be _after_ the instruction. - */ - if (fsr & (1 << 10)) - regs->ARM_pc += 4; - - return 0; -} - -int -clear_master_aborts(void) -{ - volatile u32 temp; - unsigned long flags; - - local_irq_save(flags); - temp = *(IXP2000_PCI_CONTROL); - if (temp & ((1 << 8) | (1 << 5))) { - ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp); - } - - temp = *(IXP2000_PCI_CMDSTAT); - if (temp & (1 << 29)) { - while (temp & (1 << 29)) { - ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp); - temp = *(IXP2000_PCI_CMDSTAT); - } - } - local_irq_restore(flags); - - return 0; -} - -void __init -ixp2000_pci_preinit(void) -{ - pci_set_flags(0); - - pcibios_min_io = 0; - pcibios_min_mem = 0; - -#ifndef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO - /* - * Configure the PCI unit to properly byteswap I/O transactions, - * and verify that it worked. - */ - ixp2000_reg_write(IXP2000_PCI_CONTROL, - (*IXP2000_PCI_CONTROL | PCI_CONTROL_IEE)); - - if ((*IXP2000_PCI_CONTROL & PCI_CONTROL_IEE) == 0) - panic("IXP2000: PCI I/O is broken on this ixp model, and " - "the needed workaround has not been configured in"); -#endif - - hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, 0, - "PCI config cycle to non-existent device"); -} - - -/* - * IXP2000 systems often have large resource requirements, so we just - * use our own resource space. - */ -static struct resource ixp2000_pci_mem_space = { - .start = 0xe0000000, - .end = 0xffffffff, - .flags = IORESOURCE_MEM, - .name = "PCI Mem Space" -}; - -static struct resource ixp2000_pci_io_space = { - .start = 0x00010000, - .end = 0x0001ffff, - .flags = IORESOURCE_IO, - .name = "PCI I/O Space" -}; - -int ixp2000_pci_setup(int nr, struct pci_sys_data *sys) -{ - if (nr >= 1) - return 0; - - pci_add_resource_offset(&sys->resources, - &ixp2000_pci_io_space, sys->io_offset); - pci_add_resource_offset(&sys->resources, - &ixp2000_pci_mem_space, sys->mem_offset); - - return 1; -} - -- cgit v1.2.3