From 37787e449b39202afae13b6c47505ae9e977cae3 Mon Sep 17 00:00:00 2001 From: Ronen Shitrit Date: Sun, 19 Oct 2008 23:19:07 +0200 Subject: [ARM] Kirkwood: properly handle the WAN port on newer RD88F6281 boards On newer versions of the RD88F6281 board, the WAN port is connected to its own ethernet port on the CPU, via a separate PHY, whereas on older versions of the board, it is connected to one of the PHYs in the ethernet switch. In the RD8F6281 setup code, detect which version of the board we are running on, and instantiate the ethernet ports and switch driver accordingly. Signed-off-by: Ronen Shitrit Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/rd88f6281-setup.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-kirkwood/rd88f6281-setup.c') diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index 175054abd630..9a0e905d10cd 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -80,24 +80,38 @@ static struct dsa_platform_data rd88f6281_switch_data = { .port_names[1] = "lan2", .port_names[2] = "lan3", .port_names[3] = "lan4", - .port_names[4] = "wan", .port_names[5] = "cpu", }; +static struct mv643xx_eth_platform_data rd88f6281_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(11), +}; + static struct mv_sata_platform_data rd88f6281_sata_data = { .n_ports = 2, }; static void __init rd88f6281_init(void) { + u32 dev, rev; + /* * Basic setup. Needs to be called early. */ kirkwood_init(); kirkwood_ehci_init(); + kirkwood_ge00_init(&rd88f6281_ge00_data); + kirkwood_pcie_id(&dev, &rev); + if (rev == MV88F6281_REV_A0) { + rd88f6281_switch_data.sw_addr = 10; + kirkwood_ge01_init(&rd88f6281_ge01_data); + } else { + rd88f6281_switch_data.port_names[4] = "wan"; + } kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ); + kirkwood_rtc_init(); kirkwood_sata_init(&rd88f6281_sata_data); kirkwood_uart0_init(); -- cgit v1.2.3