From ce56d169976488e888878eed5f1bc304cf116c43 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Mon, 6 Dec 2010 21:53:16 +0000 Subject: Kirkwood: Add support for 6282 based QNAP devices Add support for the QNAP NAS devices based on Marvell's 6282 Kirkwood chip (TS-119P+, TS-219P+ and TS-419P+). The differences to the 6281 based devices are: - Ethernet PHY address - GPIOs used for buttons (TS-119P+/TS-219P+) Signed-off-by: Martin Michlmayr Acked-by: Saeed Bishara Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/ts41x-setup.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm/mach-kirkwood/ts41x-setup.c') diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index 3587a281d993..9a44029915e2 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -119,6 +119,8 @@ static unsigned int qnap_ts41x_mpp_config[] __initdata = { static void __init qnap_ts41x_init(void) { + u32 dev, rev; + /* * Basic setup. Needs to be called early. */ @@ -130,8 +132,15 @@ static void __init qnap_ts41x_init(void) qnap_tsx1x_register_flash(); kirkwood_i2c_init(); i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1); + + kirkwood_pcie_id(&dev, &rev); + if (dev == MV88F6282_DEV_ID) { + qnap_ts41x_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); + qnap_ts41x_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1); + } kirkwood_ge00_init(&qnap_ts41x_ge00_data); kirkwood_ge01_init(&qnap_ts41x_ge01_data); + kirkwood_sata_init(&qnap_ts41x_sata_data); kirkwood_ehci_init(); platform_device_register(&qnap_ts41x_button_device); -- cgit v1.2.3