From 65bd4341d61678494ea14994d0d7df73644ca014 Mon Sep 17 00:00:00 2001
From: Suman Anna <s-anna@ti.com>
Date: Wed, 4 Mar 2015 20:01:16 -0600
Subject: hwspinlock/omap: add support for dt nodes

HwSpinlock IP is present only on OMAP4 and other newer SoCs,
which are all device-tree boot only. This patch adds the
base support for parsing the DT nodes, and removes the code
dealing with the traditional platform device instantiation.

Signed-off-by: Suman Anna <s-anna@ti.com>
[tony@atomide.com: ack for legacy file removal]
Acked-by: Tony Lindgren <tony@atomide.com>
[comment on the imperfect always-zero base_id]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
---
 arch/arm/mach-omap2/Makefile     |  3 --
 arch/arm/mach-omap2/hwspinlock.c | 60 ----------------------------------------
 2 files changed, 63 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/hwspinlock.c

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ec002bd4af77..9a2c88e56bae 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -277,8 +277,5 @@ obj-y					+= $(nand-m) $(nand-y)
 
 smsc911x-$(CONFIG_SMSC911X)		:= gpmc-smsc911x.o
 obj-y					+= $(smsc911x-m) $(smsc911x-y)
-ifneq ($(CONFIG_HWSPINLOCK_OMAP),)
-obj-y					+= hwspinlock.o
-endif
 
 obj-y					+= common-board-devices.o twl-common.o dss-common.o
diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c
deleted file mode 100644
index ef175acaeaa2..000000000000
--- a/arch/arm/mach-omap2/hwspinlock.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * OMAP hardware spinlock device initialization
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
- *
- * Contact: Simon Que <sque@ti.com>
- *          Hari Kanigeri <h-kanigeri2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/hwspinlock.h>
-
-#include "soc.h"
-#include "omap_hwmod.h"
-#include "omap_device.h"
-
-static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = {
-	.base_id = 0,
-};
-
-static int __init hwspinlocks_init(void)
-{
-	int retval = 0;
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-	const char *oh_name = "spinlock";
-	const char *dev_name = "omap_hwspinlock";
-
-	/*
-	 * Hwmod lookup will fail in case our platform doesn't support the
-	 * hardware spinlock module, so it is safe to run this initcall
-	 * on all omaps
-	 */
-	oh = omap_hwmod_lookup(oh_name);
-	if (oh == NULL)
-		return -EINVAL;
-
-	pdev = omap_device_build(dev_name, 0, oh, &omap_hwspinlock_pdata,
-				sizeof(struct hwspinlock_pdata));
-	if (IS_ERR(pdev)) {
-		pr_err("Can't build omap_device for %s:%s\n", dev_name,
-								oh_name);
-		retval = PTR_ERR(pdev);
-	}
-
-	return retval;
-}
-/* early board code might need to reserve specific hwspinlock instances */
-omap_postcore_initcall(hwspinlocks_init);
-- 
cgit v1.2.3


From 102bcb6ed2d1c3ffcc7269afc957c2df11942085 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 4 May 2015 08:54:41 -0700
Subject: ARM: OMAP2+: Fix omap off idle power consumption creeping up

If we use a combination of VMODE and I2C4 for retention modes,
eventually the off idle power consumption will creep up by about
23mW, even during off mode with I2C4 always staying enabled.

Turns out this is because of erratum i531 "Extra Power Consumed
When Repeated Start Operation Mode Is Enabled on I2C Interface
Dedicated for Smart Reflex (I2C4)" as pointed out by Nishanth
Menon <nm@ti.com>.

Let's fix the issue by adding i2c_cfg_clear_mask for the bits
to clear when initializing the I2C4 adapter so we can clear
SREN bit that drives the I2C4 lines low otherwise when there
is no traffic.

Fixes: 3b8c4ebb7630 ("ARM: OMAP3: Fix idle mode signaling for
Cc: stable@vger.kernel.org # v3.16+
sys_clkreq and sys_off_mode")
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/prm-regbits-34xx.h |  1 +
 arch/arm/mach-omap2/prm-regbits-44xx.h |  1 +
 arch/arm/mach-omap2/vc.c               | 12 ++++++++++--
 arch/arm/mach-omap2/vc.h               |  2 ++
 arch/arm/mach-omap2/vc3xxx_data.c      |  1 +
 arch/arm/mach-omap2/vc44xx_data.c      |  1 +
 6 files changed, 16 insertions(+), 2 deletions(-)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index cbefbd7cfdb5..661d753df584 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -112,6 +112,7 @@
 #define OMAP3430_VC_CMD_ONLP_SHIFT			16
 #define OMAP3430_VC_CMD_RET_SHIFT			8
 #define OMAP3430_VC_CMD_OFF_SHIFT			0
+#define OMAP3430_SREN_MASK				(1 << 4)
 #define OMAP3430_HSEN_MASK				(1 << 3)
 #define OMAP3430_MCODE_MASK				(0x7 << 0)
 #define OMAP3430_VALID_MASK				(1 << 24)
diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h
index b1c7a33e00e7..e794828dee55 100644
--- a/arch/arm/mach-omap2/prm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-44xx.h
@@ -35,6 +35,7 @@
 #define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT				1
 #define OMAP4430_GLOBAL_WUEN_MASK					(1 << 16)
 #define OMAP4430_HSMCODE_MASK						(0x7 << 0)
+#define OMAP4430_SRMODEEN_MASK						(1 << 4)
 #define OMAP4430_HSMODEEN_MASK						(1 << 3)
 #define OMAP4430_HSSCLL_SHIFT						24
 #define OMAP4430_ICEPICK_RST_SHIFT					9
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index be9ef834fa81..076fd20d7e5a 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -316,7 +316,8 @@ static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm)
 	 * idle. And we can also scale voltages to zero for off-idle.
 	 * Note that no actual voltage scaling during off-idle will
 	 * happen unless the board specific twl4030 PMIC scripts are
-	 * loaded.
+	 * loaded. See also omap_vc_i2c_init for comments regarding
+	 * erratum i531.
 	 */
 	val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET);
 	if (!(val & OMAP3430_PRM_VOLTCTRL_SEL_OFF)) {
@@ -704,9 +705,16 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
 		return;
 	}
 
+	/*
+	 * Note that for omap3 OMAP3430_SREN_MASK clears SREN to work around
+	 * erratum i531 "Extra Power Consumed When Repeated Start Operation
+	 * Mode Is Enabled on I2C Interface Dedicated for Smart Reflex (I2C4)".
+	 * Otherwise I2C4 eventually leads into about 23mW extra power being
+	 * consumed even during off idle using VMODE.
+	 */
 	i2c_high_speed = voltdm->pmic->i2c_high_speed;
 	if (i2c_high_speed)
-		voltdm->rmw(vc->common->i2c_cfg_hsen_mask,
+		voltdm->rmw(vc->common->i2c_cfg_clear_mask,
 			    vc->common->i2c_cfg_hsen_mask,
 			    vc->common->i2c_cfg_reg);
 
diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h
index cdbdd78e755e..89b83b7ff3ec 100644
--- a/arch/arm/mach-omap2/vc.h
+++ b/arch/arm/mach-omap2/vc.h
@@ -34,6 +34,7 @@ struct voltagedomain;
  * @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
  * @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
  * @i2c_cfg_reg: I2C configuration register offset
+ * @i2c_cfg_clear_mask: high-speed mode bit clear mask in I2C config register
  * @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register
  * @i2c_mcode_mask: MCODE field mask for I2C config register
  *
@@ -52,6 +53,7 @@ struct omap_vc_common {
 	u8 cmd_ret_shift;
 	u8 cmd_off_shift;
 	u8 i2c_cfg_reg;
+	u8 i2c_cfg_clear_mask;
 	u8 i2c_cfg_hsen_mask;
 	u8 i2c_mcode_mask;
 };
diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c
index 75bc4aa22b3a..71d74c9172c1 100644
--- a/arch/arm/mach-omap2/vc3xxx_data.c
+++ b/arch/arm/mach-omap2/vc3xxx_data.c
@@ -40,6 +40,7 @@ static struct omap_vc_common omap3_vc_common = {
 	.cmd_onlp_shift	 = OMAP3430_VC_CMD_ONLP_SHIFT,
 	.cmd_ret_shift	 = OMAP3430_VC_CMD_RET_SHIFT,
 	.cmd_off_shift	 = OMAP3430_VC_CMD_OFF_SHIFT,
+	.i2c_cfg_clear_mask = OMAP3430_SREN_MASK | OMAP3430_HSEN_MASK,
 	.i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK,
 	.i2c_cfg_reg	 = OMAP3_PRM_VC_I2C_CFG_OFFSET,
 	.i2c_mcode_mask	 = OMAP3430_MCODE_MASK,
diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c
index 085e5d6a04fd..2abd5fa8a697 100644
--- a/arch/arm/mach-omap2/vc44xx_data.c
+++ b/arch/arm/mach-omap2/vc44xx_data.c
@@ -42,6 +42,7 @@ static const struct omap_vc_common omap4_vc_common = {
 	.cmd_ret_shift = OMAP4430_RET_SHIFT,
 	.cmd_off_shift = OMAP4430_OFF_SHIFT,
 	.i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET,
+	.i2c_cfg_clear_mask = OMAP4430_SRMODEEN_MASK | OMAP4430_HSMODEEN_MASK,
 	.i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK,
 	.i2c_mcode_mask	 = OMAP4430_HSMCODE_MASK,
 };
-- 
cgit v1.2.3


From 11cd7b8c2773d01e4b40e38568ae62c471a2ea10 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 4 May 2015 10:48:07 -0700
Subject: ARM: OMAP2+: Remove legacy booting support for cm-t35

We've been moving all omap2+ based systems to boot in device tree only
mode for a few years now. Only omap3 has legacy booting support
remaining. Most omap3 boards already have related arch/arm/boot/*.dts*
files for booting with device tree.

This board has support for device tree based booting, and we've been
printing warnings about the legacy booting being deprecated for a
few merge cycles now. Let's attempt to remove the legacy booting
for it.

The reason for removing the legacy booting support now rather than
later is we can simply revert this patch if necessary if we run
into some unexpected issues that are not trivial to fix for the
device tree based booting.

Cc: Dmitry Lifshitz <lifshitz@compulab.co.il>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig        |  10 -
 arch/arm/mach-omap2/Makefile       |   1 -
 arch/arm/mach-omap2/board-cm-t35.c | 769 -------------------------------------
 3 files changed, 780 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/board-cm-t35.c

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 6468f15f060c..8b3aa4ca59a2 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -240,16 +240,6 @@ config MACH_NOKIA_RX51
 	default y
 	select OMAP_PACKAGE_CBB
 
-config MACH_CM_T35
-	bool "CompuLab CM-T35/CM-T3730 modules"
-	depends on ARCH_OMAP3
-	default y
-	select MACH_CM_T3730
-	select OMAP_PACKAGE_CUS
-
-config MACH_CM_T3730
-       bool
-
 config OMAP3_SDRC_AC_TIMING
 	bool "Enable SDRC AC timing register changes"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ec002bd4af77..ff634a1c26f5 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -252,7 +252,6 @@ obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o sdram-nokia.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-peripherals.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-video.o
-obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o
 
 # Platform specific device init code
 
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
deleted file mode 100644
index b5dfbc1b1fc6..000000000000
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ /dev/null
@@ -1,769 +0,0 @@
-/*
- * CompuLab CM-T35/CM-T3730 modules support
- *
- * Copyright (C) 2009-2011 CompuLab, Ltd.
- * Authors: Mike Rapoport <mike@compulab.co.il>
- *	    Igor Grinberg <grinberg@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/omap-gpmc.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include <linux/platform_data/at24.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/mmc/host.h>
-#include <linux/usb/phy.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/tdo24m.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include "common.h"
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#define CM_T35_GPIO_PENDOWN		57
-#define SB_T35_USB_HUB_RESET_GPIO	167
-
-#define CM_T35_SMSC911X_CS	5
-#define CM_T35_SMSC911X_GPIO	163
-#define SB_T35_SMSC911X_CS	4
-#define SB_T35_SMSC911X_GPIO	65
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include <linux/smsc911x.h>
-#include "gpmc-smsc911x.h"
-
-static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = {
-	.id		= 0,
-	.cs             = CM_T35_SMSC911X_CS,
-	.gpio_irq       = CM_T35_SMSC911X_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = {
-	.id		= 1,
-	.cs             = SB_T35_SMSC911X_CS,
-	.gpio_irq       = SB_T35_SMSC911X_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static struct regulator_consumer_supply cm_t35_smsc911x_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static struct regulator_consumer_supply sb_t35_smsc911x_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
-};
-
-static void __init cm_t35_init_ethernet(void)
-{
-	regulator_register_fixed(0, cm_t35_smsc911x_supplies,
-				 ARRAY_SIZE(cm_t35_smsc911x_supplies));
-	regulator_register_fixed(1, sb_t35_smsc911x_supplies,
-				 ARRAY_SIZE(sb_t35_smsc911x_supplies));
-
-	gpmc_smsc911x_init(&cm_t35_smsc911x_cfg);
-	gpmc_smsc911x_init(&sb_t35_smsc911x_cfg);
-}
-#else
-static inline void __init cm_t35_init_ethernet(void) { return; }
-#endif
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-#include <linux/leds.h>
-
-static struct gpio_led cm_t35_leds[] = {
-	[0] = {
-		.gpio			= 186,
-		.name			= "cm-t35:green",
-		.default_trigger	= "heartbeat",
-		.active_low		= 0,
-	},
-};
-
-static struct gpio_led_platform_data cm_t35_led_pdata = {
-	.num_leds	= ARRAY_SIZE(cm_t35_leds),
-	.leds		= cm_t35_leds,
-};
-
-static struct platform_device cm_t35_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &cm_t35_led_pdata,
-	},
-};
-
-static void __init cm_t35_init_led(void)
-{
-	platform_device_register(&cm_t35_led_device);
-}
-#else
-static inline void cm_t35_init_led(void) {}
-#endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-static struct mtd_partition cm_t35_nand_partitions[] = {
-	{
-		.name           = "xloader",
-		.offset         = 0,			/* Offset = 0x00000 */
-		.size           = 4 * NAND_BLOCK_SIZE,
-		.mask_flags     = MTD_WRITEABLE
-	},
-	{
-		.name           = "uboot",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size           = 15 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "uboot environment",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
-		.size           = 2 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "linux",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x2A0000 */
-		.size           = 32 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x6A0000 */
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct omap_nand_platform_data cm_t35_nand_data = {
-	.parts			= cm_t35_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(cm_t35_nand_partitions),
-	.cs			= 0,
-};
-
-static void __init cm_t35_init_nand(void)
-{
-	if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0)
-		pr_err("CM-T35: Unable to register NAND device\n");
-}
-#else
-static inline void cm_t35_init_nand(void) {}
-#endif
-
-#define CM_T35_LCD_EN_GPIO 157
-#define CM_T35_LCD_BL_GPIO 58
-#define CM_T35_DVI_EN_GPIO 54
-
-static const struct display_timing cm_t35_lcd_videomode = {
-	.pixelclock	= { 0, 26000000, 0 },
-
-	.hactive = { 0, 480, 0 },
-	.hfront_porch = { 0, 104, 0 },
-	.hback_porch = { 0, 8, 0 },
-	.hsync_len = { 0, 8, 0 },
-
-	.vactive = { 0, 640, 0 },
-	.vfront_porch = { 0, 4, 0 },
-	.vback_porch = { 0, 2, 0 },
-	.vsync_len = { 0, 2, 0 },
-
-	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
-		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE,
-};
-
-static struct panel_dpi_platform_data cm_t35_lcd_pdata = {
-	.name                   = "lcd",
-	.source                 = "dpi.0",
-
-	.data_lines		= 18,
-
-	.display_timing		= &cm_t35_lcd_videomode,
-
-	.enable_gpio		= -1,
-	.backlight_gpio		= CM_T35_LCD_BL_GPIO,
-};
-
-static struct platform_device cm_t35_lcd_device = {
-	.name                   = "panel-dpi",
-	.id                     = 0,
-	.dev.platform_data      = &cm_t35_lcd_pdata,
-};
-
-static struct connector_dvi_platform_data cm_t35_dvi_connector_pdata = {
-	.name                   = "dvi",
-	.source                 = "tfp410.0",
-	.i2c_bus_num            = -1,
-};
-
-static struct platform_device cm_t35_dvi_connector_device = {
-	.name                   = "connector-dvi",
-	.id                     = 0,
-	.dev.platform_data      = &cm_t35_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data cm_t35_tfp410_pdata = {
-	.name                   = "tfp410.0",
-	.source                 = "dpi.0",
-	.data_lines             = 24,
-	.power_down_gpio        = CM_T35_DVI_EN_GPIO,
-};
-
-static struct platform_device cm_t35_tfp410_device = {
-	.name                   = "tfp410",
-	.id                     = 0,
-	.dev.platform_data      = &cm_t35_tfp410_pdata,
-};
-
-static struct connector_atv_platform_data cm_t35_tv_pdata = {
-	.name = "tv",
-	.source = "venc.0",
-	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
-	.invert_polarity = false,
-};
-
-static struct platform_device cm_t35_tv_connector_device = {
-	.name                   = "connector-analog-tv",
-	.id                     = 0,
-	.dev.platform_data      = &cm_t35_tv_pdata,
-};
-
-static struct omap_dss_board_info cm_t35_dss_data = {
-	.default_display_name = "dvi",
-};
-
-static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
-	.turbo_mode	= 0,
-};
-
-static struct tdo24m_platform_data tdo24m_config = {
-	.model = TDO35S,
-};
-
-static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = {
-	{
-		.modalias		= "tdo24m",
-		.bus_num		= 4,
-		.chip_select		= 0,
-		.max_speed_hz		= 1000000,
-		.controller_data	= &tdo24m_mcspi_config,
-		.platform_data		= &tdo24m_config,
-	},
-};
-
-static void __init cm_t35_init_display(void)
-{
-	int err;
-
-	spi_register_board_info(cm_t35_lcd_spi_board_info,
-				ARRAY_SIZE(cm_t35_lcd_spi_board_info));
-
-
-	err = gpio_request_one(CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW,
-			"lcd bl enable");
-	if (err) {
-		pr_err("CM-T35: failed to request LCD EN GPIO\n");
-		return;
-	}
-
-	msleep(50);
-	gpio_set_value(CM_T35_LCD_EN_GPIO, 1);
-
-	err = omap_display_init(&cm_t35_dss_data);
-	if (err) {
-		pr_err("CM-T35: failed to register DSS device\n");
-		gpio_free(CM_T35_LCD_EN_GPIO);
-	}
-
-	platform_device_register(&cm_t35_tfp410_device);
-	platform_device_register(&cm_t35_dvi_connector_device);
-	platform_device_register(&cm_t35_lcd_device);
-	platform_device_register(&cm_t35_tv_connector_device);
-}
-
-static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply cm_t35_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply cm_t35_vio_supplies[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data cm_t35_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(cm_t35_vmmc1_supply),
-	.consumer_supplies	= cm_t35_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data cm_t35_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(cm_t35_vsim_supply),
-	.consumer_supplies	= cm_t35_vsim_supply,
-};
-
-static struct regulator_init_data cm_t35_vio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(cm_t35_vio_supplies),
-	.consumer_supplies	= cm_t35_vio_supplies,
-};
-
-static uint32_t cm_t35_keymap[] = {
-	KEY(0, 0, KEY_A),	KEY(0, 1, KEY_B),	KEY(0, 2, KEY_LEFT),
-	KEY(1, 0, KEY_UP),	KEY(1, 1, KEY_ENTER),	KEY(1, 2, KEY_DOWN),
-	KEY(2, 0, KEY_RIGHT),	KEY(2, 1, KEY_C),	KEY(2, 2, KEY_D),
-};
-
-static struct matrix_keymap_data cm_t35_keymap_data = {
-	.keymap			= cm_t35_keymap,
-	.keymap_size		= ARRAY_SIZE(cm_t35_keymap),
-};
-
-static struct twl4030_keypad_data cm_t35_kp_data = {
-	.keymap_data	= &cm_t35_keymap_data,
-	.rows		= 3,
-	.cols		= 3,
-	.rep		= 1,
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.deferred	= true,
-	},
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.transceiver	= 1,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.ocr_mask	= 0x00100000,	/* 3.3V */
-	},
-	{}	/* Terminator */
-};
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 1,
-		.reset_gpio = OMAP_MAX_GPIO_LINES + 6,
-		.vcc_gpio = -EINVAL,
-	},
-	{
-		.port = 2,
-		.reset_gpio = OMAP_MAX_GPIO_LINES + 7,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-static void  __init cm_t35_init_usbh(void)
-{
-	int err;
-
-	err = gpio_request_one(SB_T35_USB_HUB_RESET_GPIO,
-			       GPIOF_OUT_INIT_LOW, "usb hub rst");
-	if (err) {
-		pr_err("SB-T35: usb hub rst gpio request failed: %d\n", err);
-	} else {
-		udelay(10);
-		gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1);
-		msleep(1);
-	}
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	usbhs_init(&usbhs_bdata);
-}
-
-static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
-				 unsigned ngpio)
-{
-	int wlan_rst = gpio + 2;
-
-	if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) {
-		gpio_export(wlan_rst, 0);
-		udelay(10);
-		gpio_set_value_cansleep(wlan_rst, 0);
-		udelay(10);
-		gpio_set_value_cansleep(wlan_rst, 1);
-	} else {
-		pr_err("CM-T35: could not obtain gpio for WiFi reset\n");
-	}
-
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
-	.setup          = cm_t35_twl_gpio_setup,
-};
-
-static struct twl4030_power_data cm_t35_power_data = {
-	.use_poweroff	= true,
-};
-
-static struct twl4030_platform_data cm_t35_twldata = {
-	/* platform_data for children goes here */
-	.keypad		= &cm_t35_kp_data,
-	.gpio		= &cm_t35_gpio_data,
-	.vmmc1		= &cm_t35_vmmc1,
-	.vsim		= &cm_t35_vsim,
-	.vio		= &cm_t35_vio,
-	.power		= &cm_t35_power_data,
-};
-
-#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
-#include <media/omap3isp.h>
-#include "devices.h"
-
-static struct isp_platform_subdev cm_t35_isp_subdevs[] = {
-	{
-		.board_info = &(struct i2c_board_info){
-			I2C_BOARD_INFO("mt9t001", 0x5d)
-		},
-		.i2c_adapter_id = 3,
-		.bus = &(struct isp_bus_cfg){
-			.interface = ISP_INTERFACE_PARALLEL,
-			.bus = {
-				.parallel = {
-					.clk_pol = 1,
-				},
-			},
-		},
-	},
-	{
-		.board_info = &(struct i2c_board_info){
-			I2C_BOARD_INFO("tvp5150", 0x5c),
-		},
-		.i2c_adapter_id = 3,
-		.bus = &(struct isp_bus_cfg){
-			.interface = ISP_INTERFACE_PARALLEL,
-			.bus = {
-				.parallel = {
-					.clk_pol = 0,
-				},
-			},
-		},
-	},
-	{ 0 },
-};
-
-static struct isp_platform_data cm_t35_isp_pdata = {
-	.subdevs = cm_t35_isp_subdevs,
-};
-
-static struct regulator_consumer_supply cm_t35_camera_supplies[] = {
-	REGULATOR_SUPPLY("vaa", "3-005d"),
-	REGULATOR_SUPPLY("vdd", "3-005d"),
-};
-
-static void __init cm_t35_init_camera(void)
-{
-	struct clk *clk;
-
-	clk = clk_register_fixed_rate(NULL, "mt9t001-clkin", NULL, CLK_IS_ROOT,
-				      48000000);
-	clk_register_clkdev(clk, NULL, "3-005d");
-
-	regulator_register_fixed(2, cm_t35_camera_supplies,
-				 ARRAY_SIZE(cm_t35_camera_supplies));
-
-	if (omap3_init_camera(&cm_t35_isp_pdata) < 0)
-		pr_warn("CM-T3x: Failed registering camera device!\n");
-}
-
-#else
-static inline void cm_t35_init_camera(void) {}
-#endif /* CONFIG_VIDEO_OMAP3 */
-
-static void __init cm_t35_init_i2c(void)
-{
-	omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
-			      TWL_COMMON_REGULATOR_VDAC |
-			      TWL_COMMON_PDATA_AUDIO);
-
-	omap3_pmic_init("tps65930", &cm_t35_twldata);
-
-	omap_register_i2c_bus(3, 400, NULL, 0);
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* nCS and IRQ for CM-T35 ethernet */
-	OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0),
-	OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
-
-	/* nCS and IRQ for SB-T35 ethernet */
-	OMAP3_MUX(GPMC_NCS4, OMAP_MUX_MODE0),
-	OMAP3_MUX(GPMC_WAIT3, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
-
-	/* PENDOWN GPIO */
-	OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-
-	/* mUSB */
-	OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
-	/* MMC 2 */
-	OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-
-	/* McSPI 1 */
-	OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
-
-	/* McSPI 4 */
-	OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
-
-	/* McBSP 2 */
-	OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-
-	/* serial ports */
-	OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-	OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
-	/* common DSS */
-	OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-
-	/* Camera */
-	OMAP3_MUX(CAM_HS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(CAM_VS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(CAM_XCLKA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(CAM_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(CAM_FLD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(CAM_D0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(CAM_D1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(CAM_D3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(CAM_D4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(CAM_D5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(CAM_D6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(CAM_D7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(CAM_D8, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
-	OMAP3_MUX(CAM_D9, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
-	OMAP3_MUX(CAM_STROBE, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
-	OMAP3_MUX(CAM_D10, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
-	OMAP3_MUX(CAM_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
-
-	/* display controls */
-	OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
-	/* TPS IRQ */
-	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
-		  OMAP_PIN_INPUT_PULLUP),
-
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-static void __init cm_t3x_common_dss_mux_init(int mux_mode)
-{
-	omap_mux_init_signal("dss_data18", mux_mode);
-	omap_mux_init_signal("dss_data19", mux_mode);
-	omap_mux_init_signal("dss_data20", mux_mode);
-	omap_mux_init_signal("dss_data21", mux_mode);
-	omap_mux_init_signal("dss_data22", mux_mode);
-	omap_mux_init_signal("dss_data23", mux_mode);
-}
-
-static void __init cm_t35_init_mux(void)
-{
-	int mux_mode = OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT;
-
-	omap_mux_init_signal("dss_data0.dss_data0", mux_mode);
-	omap_mux_init_signal("dss_data1.dss_data1", mux_mode);
-	omap_mux_init_signal("dss_data2.dss_data2", mux_mode);
-	omap_mux_init_signal("dss_data3.dss_data3", mux_mode);
-	omap_mux_init_signal("dss_data4.dss_data4", mux_mode);
-	omap_mux_init_signal("dss_data5.dss_data5", mux_mode);
-	cm_t3x_common_dss_mux_init(mux_mode);
-}
-
-static void __init cm_t3730_init_mux(void)
-{
-	int mux_mode = OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT;
-
-	omap_mux_init_signal("sys_boot0", mux_mode);
-	omap_mux_init_signal("sys_boot1", mux_mode);
-	omap_mux_init_signal("sys_boot3", mux_mode);
-	omap_mux_init_signal("sys_boot4", mux_mode);
-	omap_mux_init_signal("sys_boot5", mux_mode);
-	omap_mux_init_signal("sys_boot6", mux_mode);
-	cm_t3x_common_dss_mux_init(mux_mode);
-}
-#else
-static inline void cm_t35_init_mux(void) {}
-static inline void cm_t3730_init_mux(void) {}
-#endif
-
-static void __init cm_t3x_common_init(void)
-{
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
-	omap_serial_init();
-	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-	omap_hsmmc_init(mmc);
-	cm_t35_init_i2c();
-	omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
-	cm_t35_init_ethernet();
-	cm_t35_init_led();
-	cm_t35_init_display();
-	omap_twl4030_audio_init("cm-t3x", NULL);
-
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-	cm_t35_init_usbh();
-	cm_t35_init_camera();
-}
-
-static void __init cm_t35_init(void)
-{
-	cm_t3x_common_init();
-	cm_t35_init_mux();
-	cm_t35_init_nand();
-}
-
-static void __init cm_t3730_init(void)
-{
-	cm_t3x_common_init();
-	cm_t3730_init_mux();
-}
-
-MACHINE_START(CM_T35, "Compulab CM-T35")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= cm_t35_init,
-	.init_late	= omap35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
-
-MACHINE_START(CM_T3730, "Compulab CM-T3730")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3630_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= cm_t3730_init,
-	.init_late     = omap3630_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
-- 
cgit v1.2.3


From 71115b30a3f55ceb52e41d80c6101960248195d1 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 4 May 2015 10:49:36 -0700
Subject: ARM: OMAP2+: Remove legacy booting support for Overo

We've been moving all omap2+ based systems to boot in device tree only
mode for a few years now. Only omap3 has legacy booting support
remaining. Most omap3 boards already have related arch/arm/boot/*.dts*
files for booting with device tree.

This board has support for device tree based booting, and we've been
printing warnings about the legacy booting being deprecated for a
few merge cycles now. Let's attempt to remove the legacy booting
for it.

The reason for removing the legacy booting support now rather than
later is we can simply revert this patch if necessary if we run
into some unexpected issues that are not trivial to fix for the
device tree based booting.

Cc: Florian Vaussard <florian.vaussard@epfl.ch>
Acked-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig       |   6 -
 arch/arm/mach-omap2/Makefile      |   1 -
 arch/arm/mach-omap2/board-overo.c | 571 --------------------------------------
 3 files changed, 578 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/board-overo.c

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 8b3aa4ca59a2..1b8a45a4642a 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -203,12 +203,6 @@ config MACH_OMAP3_TORPEDO
 	 for full description please see the products webpage at
 	 http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit
 
-config MACH_OVERO
-	bool "Gumstix Overo board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config MACH_OMAP3517EVM
 	bool "OMAP3517/ AM3517 EVM board"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ff634a1c26f5..a60e98689713 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -246,7 +246,6 @@ obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o
 obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
 obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
 obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
-obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o sdram-nokia.o
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
deleted file mode 100644
index 2dae6ccd39bb..000000000000
--- a/arch/arm/mach-omap2/board-overo.c
+++ /dev/null
@@ -1,571 +0,0 @@
-/*
- * board-overo.c (Gumstix Overo)
- *
- * Initial code: Steve Sakoman <steve@sakoman.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/spi/spi.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mmc/host.h>
-#include <linux/usb/phy.h>
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "common.h"
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "gpmc.h"
-#include "hsmmc.h"
-#include "board-flash.h"
-#include "common-board-devices.h"
-
-#define	NAND_CS			0
-
-#define OVERO_GPIO_BT_XGATE	15
-#define OVERO_GPIO_W2W_NRESET	16
-#define OVERO_GPIO_PENDOWN	114
-#define OVERO_GPIO_BT_NRESET	164
-#define OVERO_GPIO_USBH_CPEN	168
-#define OVERO_GPIO_USBH_NRESET	183
-
-#define OVERO_SMSC911X_CS      5
-#define OVERO_SMSC911X_GPIO    176
-#define OVERO_SMSC911X_NRESET  64
-#define OVERO_SMSC911X2_CS     4
-#define OVERO_SMSC911X2_GPIO   65
-
-/* whether to register LCD35 instead of LCD43 */
-static bool overo_use_lcd35;
-
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
-	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-
-/* fixed regulator for ads7846 */
-static struct regulator_consumer_supply ads7846_supply[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-static struct regulator_init_data vads7846_regulator = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ads7846_supply),
-	.consumer_supplies	= ads7846_supply,
-};
-
-static struct fixed_voltage_config vads7846 = {
-	.supply_name		= "vads7846",
-	.microvolts		= 3300000, /* 3.3V */
-	.gpio			= -EINVAL,
-	.startup_delay		= 0,
-	.init_data		= &vads7846_regulator,
-};
-
-static struct platform_device vads7846_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data = &vads7846,
-	},
-};
-
-static void __init overo_ads7846_init(void)
-{
-	omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL);
-	platform_device_register(&vads7846_device);
-}
-
-#else
-static inline void __init overo_ads7846_init(void) { return; }
-#endif
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-
-#include <linux/smsc911x.h>
-#include "gpmc-smsc911x.h"
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
-	.id		= 0,
-	.cs             = OVERO_SMSC911X_CS,
-	.gpio_irq       = OVERO_SMSC911X_GPIO,
-	.gpio_reset     = OVERO_SMSC911X_NRESET,
-	.flags		= SMSC911X_USE_32BIT,
-};
-
-static struct omap_smsc911x_platform_data smsc911x2_cfg = {
-	.id		= 1,
-	.cs             = OVERO_SMSC911X2_CS,
-	.gpio_irq       = OVERO_SMSC911X2_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT,
-};
-
-static void __init overo_init_smsc911x(void)
-{
-	gpmc_smsc911x_init(&smsc911x_cfg);
-	gpmc_smsc911x_init(&smsc911x2_cfg);
-}
-
-#else
-static inline void __init overo_init_smsc911x(void) { return; }
-#endif
-
-/* DSS */
-#define OVERO_GPIO_LCD_EN 144
-#define OVERO_GPIO_LCD_BL 145
-
-static struct connector_atv_platform_data overo_tv_pdata = {
-	.name = "tv",
-	.source = "venc.0",
-	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
-	.invert_polarity = false,
-};
-
-static struct platform_device overo_tv_connector_device = {
-	.name                   = "connector-analog-tv",
-	.id                     = 0,
-	.dev.platform_data      = &overo_tv_pdata,
-};
-
-static const struct display_timing overo_lcd43_videomode = {
-	.pixelclock	= { 0, 9200000, 0 },
-
-	.hactive = { 0, 480, 0 },
-	.hfront_porch = { 0, 8, 0 },
-	.hback_porch = { 0, 4, 0 },
-	.hsync_len = { 0, 41, 0 },
-
-	.vactive = { 0, 272, 0 },
-	.vfront_porch = { 0, 4, 0 },
-	.vback_porch = { 0, 2, 0 },
-	.vsync_len = { 0, 10, 0 },
-
-	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
-		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
-};
-
-static struct panel_dpi_platform_data overo_lcd43_pdata = {
-	.name                   = "lcd43",
-	.source                 = "dpi.0",
-
-	.data_lines		= 24,
-
-	.display_timing		= &overo_lcd43_videomode,
-
-	.enable_gpio		= OVERO_GPIO_LCD_EN,
-	.backlight_gpio		= OVERO_GPIO_LCD_BL,
-};
-
-static struct platform_device overo_lcd43_device = {
-	.name                   = "panel-dpi",
-	.id                     = 0,
-	.dev.platform_data      = &overo_lcd43_pdata,
-};
-
-static struct connector_dvi_platform_data overo_dvi_connector_pdata = {
-	.name                   = "dvi",
-	.source                 = "tfp410.0",
-	.i2c_bus_num            = 3,
-};
-
-static struct platform_device overo_dvi_connector_device = {
-	.name                   = "connector-dvi",
-	.id                     = 0,
-	.dev.platform_data      = &overo_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data overo_tfp410_pdata = {
-	.name                   = "tfp410.0",
-	.source                 = "dpi.0",
-	.data_lines             = 24,
-	.power_down_gpio        = -1,
-};
-
-static struct platform_device overo_tfp410_device = {
-	.name                   = "tfp410",
-	.id                     = 0,
-	.dev.platform_data      = &overo_tfp410_pdata,
-};
-
-static struct omap_dss_board_info overo_dss_data = {
-	.default_display_name = "lcd43",
-};
-
-static void __init overo_display_init(void)
-{
-	omap_display_init(&overo_dss_data);
-
-	if (!overo_use_lcd35)
-		platform_device_register(&overo_lcd43_device);
-	platform_device_register(&overo_tfp410_device);
-	platform_device_register(&overo_dvi_connector_device);
-	platform_device_register(&overo_tv_connector_device);
-}
-
-static struct mtd_partition overo_nand_partitions[] = {
-	{
-		.name           = "xloader",
-		.offset         = 0,			/* Offset = 0x00000 */
-		.size           = 4 * NAND_BLOCK_SIZE,
-		.mask_flags     = MTD_WRITEABLE
-	},
-	{
-		.name           = "uboot",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size           = 14 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "uboot environment",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x240000 */
-		.size           = 2 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "linux",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
-		.size           = 32 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.transceiver	= true,
-		.ocr_mask	= 0x00100000,	/* 3.3V */
-	},
-	{}	/* Terminator */
-};
-
-static struct regulator_consumer_supply overo_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-#include <linux/leds.h>
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "overo:red:gpio21",
-		.default_trigger	= "heartbeat",
-		.gpio			= 21,
-		.active_low		= true,
-	},
-	{
-		.name			= "overo:blue:gpio22",
-		.default_trigger	= "none",
-		.gpio			= 22,
-		.active_low		= true,
-	},
-	{
-		.name			= "overo:blue:COM",
-		.default_trigger	= "mmc0",
-		.gpio			= -EINVAL,	/* gets replaced */
-		.active_low		= true,
-	},
-};
-
-static struct gpio_led_platform_data gpio_leds_pdata = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device gpio_leds_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_leds_pdata,
-	},
-};
-
-static void __init overo_init_led(void)
-{
-	platform_device_register(&gpio_leds_device);
-}
-
-#else
-static inline void __init overo_init_led(void) { return; }
-#endif
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-static struct gpio_keys_button gpio_buttons[] = {
-	{
-		.code			= BTN_0,
-		.gpio			= 23,
-		.desc			= "button0",
-		.wakeup			= 1,
-	},
-	{
-		.code			= BTN_1,
-		.gpio			= 14,
-		.desc			= "button1",
-		.wakeup			= 1,
-	},
-};
-
-static struct gpio_keys_platform_data gpio_keys_pdata = {
-	.buttons	= gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_keys_pdata,
-	},
-};
-
-static void __init overo_init_keys(void)
-{
-	platform_device_register(&gpio_keys_device);
-}
-
-#else
-static inline void __init overo_init_keys(void) { return; }
-#endif
-
-static int overo_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
-	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-#endif
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data overo_gpio_data = {
-	.use_leds	= true,
-	.setup		= overo_twl_gpio_setup,
-};
-
-static struct regulator_init_data overo_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(overo_vmmc1_supply),
-	.consumer_supplies	= overo_vmmc1_supply,
-};
-
-static struct twl4030_platform_data overo_twldata = {
-	.gpio		= &overo_gpio_data,
-	.vmmc1		= &overo_vmmc1,
-};
-
-static int __init overo_i2c_init(void)
-{
-	omap3_pmic_get_config(&overo_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	overo_twldata.vpll2->constraints.name = "VDVI";
-
-	omap3_pmic_init("tps65950", &overo_twldata);
-	/* i2c2 pins are used for gpio */
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static struct panel_lb035q02_platform_data overo_lcd35_pdata = {
-	.name                   = "lcd35",
-	.source                 = "dpi.0",
-
-	.data_lines		= 24,
-
-	.enable_gpio		= OVERO_GPIO_LCD_EN,
-	.backlight_gpio		= OVERO_GPIO_LCD_BL,
-};
-
-/*
- * NOTE: We need to add either the lgphilips panel, or the lcd43 panel. The
- * selection is done based on the overo_use_lcd35 field. If new SPI
- * devices are added here, extra work is needed to make only the lgphilips panel
- * affected by the overo_use_lcd35 field.
- */
-static struct spi_board_info overo_spi_board_info[] __initdata = {
-	{
-		.modalias		= "panel_lgphilips_lb035q02",
-		.bus_num		= 1,
-		.chip_select		= 1,
-		.max_speed_hz		= 500000,
-		.mode			= SPI_MODE_3,
-		.platform_data		= &overo_lcd35_pdata,
-	},
-};
-
-static int __init overo_spi_init(void)
-{
-	overo_ads7846_init();
-
-	if (overo_use_lcd35) {
-		spi_register_board_info(overo_spi_board_info,
-				ARRAY_SIZE(overo_spi_board_info));
-	}
-	return 0;
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 2,
-		.reset_gpio = OVERO_GPIO_USBH_NRESET,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct gpio overo_bt_gpios[] __initdata = {
-	{ OVERO_GPIO_BT_XGATE,	GPIOF_OUT_INIT_LOW,	"lcd enable"    },
-	{ OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH,	"lcd bl enable" },
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-	REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
-};
-
-static void __init overo_init(void)
-{
-	int ret;
-
-	if (strstr(boot_command_line, "omapdss.def_disp=lcd35"))
-		overo_use_lcd35 = true;
-
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	overo_i2c_init();
-	omap_hsmmc_init(mmc);
-	omap_serial_init();
-	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-	board_nand_init(overo_nand_partitions,
-			ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	usbhs_init(&usbhs_bdata);
-	overo_spi_init();
-	overo_init_smsc911x();
-	overo_init_led();
-	overo_init_keys();
-	omap_twl4030_audio_init("overo", NULL);
-
-	overo_display_init();
-
-	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
-	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
-	ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH,
-			       "OVERO_GPIO_W2W_NRESET");
-	if (ret == 0) {
-		gpio_export(OVERO_GPIO_W2W_NRESET, 0);
-		gpio_set_value(OVERO_GPIO_W2W_NRESET, 0);
-		udelay(10);
-		gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
-	} else {
-		pr_err("could not obtain gpio for OVERO_GPIO_W2W_NRESET\n");
-	}
-
-	ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios));
-	if (ret) {
-		pr_err("%s: could not obtain BT gpios\n", __func__);
-	} else {
-		gpio_export(OVERO_GPIO_BT_XGATE, 0);
-		gpio_export(OVERO_GPIO_BT_NRESET, 0);
-		gpio_set_value(OVERO_GPIO_BT_NRESET, 0);
-		mdelay(6);
-		gpio_set_value(OVERO_GPIO_BT_NRESET, 1);
-	}
-
-	ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH,
-			       "OVERO_GPIO_USBH_CPEN");
-	if (ret == 0)
-		gpio_export(OVERO_GPIO_USBH_CPEN, 0);
-	else
-		pr_err("could not obtain gpio for OVERO_GPIO_USBH_CPEN\n");
-}
-
-MACHINE_START(OVERO, "Gumstix Overo")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= overo_init,
-	.init_late	= omap35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
-- 
cgit v1.2.3


From b2e01129469b4306bd79dc449d72454a3a27df7f Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 2 Mar 2015 15:37:21 +0000
Subject: ARM: omap2: use clkdev_create()

Rather than open coding the clkdev allocation, initialisation and
addition, use the clkdev_create() helper.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 85e0b0c06718..b64d717bfab6 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -232,14 +232,12 @@ void omap2xxx_clkt_vps_init(void)
 	struct clk_hw_omap *hw = NULL;
 	struct clk *clk;
 	const char *parent_name = "mpu_ck";
-	struct clk_lookup *lookup = NULL;
 
 	omap2xxx_clkt_vps_late_init();
 	omap2xxx_clkt_vps_check_bootloader_rates();
 
 	hw = kzalloc(sizeof(*hw), GFP_KERNEL);
-	lookup = kzalloc(sizeof(*lookup), GFP_KERNEL);
-	if (!hw || !lookup)
+	if (!hw)
 		goto cleanup;
 	init.name = "virt_prcm_set";
 	init.ops = &virt_prcm_set_ops;
@@ -249,15 +247,9 @@ void omap2xxx_clkt_vps_init(void)
 	hw->hw.init = &init;
 
 	clk = clk_register(NULL, &hw->hw);
-
-	lookup->dev_id = NULL;
-	lookup->con_id = "cpufreq_ck";
-	lookup->clk = clk;
-
-	clkdev_add(lookup);
+	clkdev_create(clk, "cpufreq_ck", NULL);
 	return;
 cleanup:
 	kfree(hw);
-	kfree(lookup);
 }
 #endif
-- 
cgit v1.2.3


From 1ca90bd408a160c95af1ca7ef29b20a789e31d19 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 2 Mar 2015 15:46:03 +0000
Subject: ARM: omap2: use clkdev_add_alias()

When creating aliases of existing clkdev clocks, use clkdev_add_alias()
isntead of open coding the lookup and clk_lookup creation.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/omap_device.c | 24 +++++++++---------------
 1 file changed, 9 insertions(+), 15 deletions(-)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 166b18f515a2..02da3655d288 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -47,7 +47,7 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias,
 		       const char *clk_name)
 {
 	struct clk *r;
-	struct clk_lookup *l;
+	int rc;
 
 	if (!clk_alias || !clk_name)
 		return;
@@ -62,21 +62,15 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias,
 		return;
 	}
 
-	r = clk_get(NULL, clk_name);
-	if (IS_ERR(r)) {
-		dev_err(&od->pdev->dev,
-			"clk_get for %s failed\n", clk_name);
-		return;
+	rc = clk_add_alias(clk_alias, dev_name(&od->pdev->dev), clk_name, NULL);
+	if (rc) {
+		if (rc == -ENODEV || rc == -ENOMEM)
+			dev_err(&od->pdev->dev,
+				"clkdev_alloc for %s failed\n", clk_alias);
+		else
+			dev_err(&od->pdev->dev,
+				"clk_get for %s failed\n", clk_name);
 	}
-
-	l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev->dev));
-	if (!l) {
-		dev_err(&od->pdev->dev,
-			"clkdev_alloc for %s failed\n", clk_alias);
-		return;
-	}
-
-	clkdev_add(l);
 }
 
 /**
-- 
cgit v1.2.3


From d203c5747e88f053e4ee373a939c05914c82eb1c Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 4 May 2015 10:45:54 -0700
Subject: ARM: OMAP2+: Remove legacy booting support for Beagleboards

We've been moving all omap2+ based systems to boot in device tree only
mode for a few years now. Only omap3 has legacy booting support
remaining. Most omap3 boards already have related arch/arm/boot/*.dts*
files for booting with device tree.

This board has support for device tree based booting, and we've been
printing warnings about the legacy booting being deprecated for a
few merge cycles now. Let's attempt to remove the legacy booting
for it.

The reason for removing the legacy booting support now rather than
later is we can simply revert this patch if necessary if we run
into some unexpected issues that are not trivial to fix for the
device tree based booting.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig             |   6 -
 arch/arm/mach-omap2/Makefile            |   1 -
 arch/arm/mach-omap2/board-omap3beagle.c | 595 --------------------------------
 3 files changed, 602 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/board-omap3beagle.c

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 1b8a45a4642a..ecc04ff13e95 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -171,12 +171,6 @@ config MACH_OMAP2_TUSB6010
 	depends on ARCH_OMAP2 && SOC_OMAP2420
 	default y if MACH_NOKIA_N8X0
 
-config MACH_OMAP3_BEAGLE
-	bool "OMAP3 BEAGLE board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config MACH_OMAP_LDP
 	bool "OMAP3 LDP board"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index a60e98689713..f1a68c63dc99 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -242,7 +242,6 @@ obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
 
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o pdata-quirks.o
-obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o
 obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
 obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
 obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
deleted file mode 100644
index 81de1c68b360..000000000000
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ /dev/null
@@ -1,595 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-omap3beagle.c
- *
- * Copyright (C) 2008 Texas Instruments
- *
- * Modified from mach-omap2/board-3430sdp.c
- *
- * Initial code: Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-#include <linux/pwm.h>
-#include <linux/leds_pwm.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/pm_opp.h>
-#include <linux/cpu.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/mmc/host.h>
-#include <linux/usb/phy.h>
-
-#include <linux/regulator/machine.h>
-#include <linux/i2c/twl.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-#include <linux/platform_data/mtd-nand-omap2.h>
-
-#include "common.h"
-#include "omap_device.h"
-#include "gpmc.h"
-#include "soc.h"
-#include "mux.h"
-#include "hsmmc.h"
-#include "pm.h"
-#include "board-flash.h"
-#include "common-board-devices.h"
-
-#define	NAND_CS	0
-
-static struct pwm_lookup pwm_lookup[] = {
-	/* LEDB -> PMU_STAT */
-	PWM_LOOKUP("twl-pwmled", 1, "leds_pwm", "beagleboard::pmu_stat",
-		   7812500, PWM_POLARITY_NORMAL),
-};
-
-static struct led_pwm pwm_leds[] = {
-	{
-		.name		= "beagleboard::pmu_stat",
-		.max_brightness	= 127,
-		.pwm_period_ns	= 7812500,
-	},
-};
-
-static struct led_pwm_platform_data pwm_data = {
-	.num_leds	= ARRAY_SIZE(pwm_leds),
-	.leds		= pwm_leds,
-};
-
-static struct platform_device leds_pwm = {
-	.name	= "leds_pwm",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &pwm_data,
-	},
-};
-
-/*
- * OMAP3 Beagle revision
- * Run time detection of Beagle revision is done by reading GPIO.
- * GPIO ID -
- *	AXBX	= GPIO173, GPIO172, GPIO171: 1 1 1
- *	C1_3	= GPIO173, GPIO172, GPIO171: 1 1 0
- *	C4	= GPIO173, GPIO172, GPIO171: 1 0 1
- *	XMA/XMB = GPIO173, GPIO172, GPIO171: 0 0 0
- *	XMC = GPIO173, GPIO172, GPIO171: 0 1 0
- */
-enum {
-	OMAP3BEAGLE_BOARD_UNKN = 0,
-	OMAP3BEAGLE_BOARD_AXBX,
-	OMAP3BEAGLE_BOARD_C1_3,
-	OMAP3BEAGLE_BOARD_C4,
-	OMAP3BEAGLE_BOARD_XM,
-	OMAP3BEAGLE_BOARD_XMC,
-};
-
-static u8 omap3_beagle_version;
-
-/*
- * Board-specific configuration
- * Defaults to BeagleBoard-xMC
- */
-static struct {
-	int mmc1_gpio_wp;
-	bool usb_pwr_level;	/* 0 - Active Low, 1 - Active High */
-	int dvi_pd_gpio;
-	int usr_button_gpio;
-	int mmc_caps;
-} beagle_config = {
-	.mmc1_gpio_wp = -EINVAL,
-	.usb_pwr_level = 0,
-	.dvi_pd_gpio = -EINVAL,
-	.usr_button_gpio = 4,
-	.mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-};
-
-static struct gpio omap3_beagle_rev_gpios[] __initdata = {
-	{ 171, GPIOF_IN, "rev_id_0"    },
-	{ 172, GPIOF_IN, "rev_id_1" },
-	{ 173, GPIOF_IN, "rev_id_2"    },
-};
-
-static void __init omap3_beagle_init_rev(void)
-{
-	int ret;
-	u16 beagle_rev = 0;
-
-	omap_mux_init_gpio(171, OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP);
-
-	ret = gpio_request_array(omap3_beagle_rev_gpios,
-				 ARRAY_SIZE(omap3_beagle_rev_gpios));
-	if (ret < 0) {
-		printk(KERN_ERR "Unable to get revision detection GPIO pins\n");
-		omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
-		return;
-	}
-
-	beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1)
-			| (gpio_get_value(173) << 2);
-
-	gpio_free_array(omap3_beagle_rev_gpios,
-			ARRAY_SIZE(omap3_beagle_rev_gpios));
-
-	switch (beagle_rev) {
-	case 7:
-		printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
-		omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
-		beagle_config.mmc1_gpio_wp = 29;
-		beagle_config.dvi_pd_gpio = 170;
-		beagle_config.usr_button_gpio = 7;
-		break;
-	case 6:
-		printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
-		omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
-		beagle_config.mmc1_gpio_wp = 23;
-		beagle_config.dvi_pd_gpio = 170;
-		beagle_config.usr_button_gpio = 7;
-		break;
-	case 5:
-		printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
-		omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
-		beagle_config.mmc1_gpio_wp = 23;
-		beagle_config.dvi_pd_gpio = 170;
-		beagle_config.usr_button_gpio = 7;
-		break;
-	case 0:
-		printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n");
-		omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
-		beagle_config.usb_pwr_level = 1;
-		beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA;
-		break;
-	case 2:
-		printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n");
-		omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
-		beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA;
-		break;
-	default:
-		printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
-		omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
-	}
-}
-
-static struct mtd_partition omap3beagle_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader",
-		.offset		= 0,
-		.size		= 4 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 15 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot Env",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
-		.size		= 1 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name		= "Kernel",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
-		.size		= 32 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name		= "File System",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-/* DSS */
-
-static struct connector_dvi_platform_data beagle_dvi_connector_pdata = {
-	.name                   = "dvi",
-	.source                 = "tfp410.0",
-	.i2c_bus_num            = 3,
-};
-
-static struct platform_device beagle_dvi_connector_device = {
-	.name                   = "connector-dvi",
-	.id                     = 0,
-	.dev.platform_data      = &beagle_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data beagle_tfp410_pdata = {
-	.name                   = "tfp410.0",
-	.source                 = "dpi.0",
-	.data_lines             = 24,
-	.power_down_gpio        = -1,
-};
-
-static struct platform_device beagle_tfp410_device = {
-	.name                   = "tfp410",
-	.id                     = 0,
-	.dev.platform_data      = &beagle_tfp410_pdata,
-};
-
-static struct connector_atv_platform_data beagle_tv_pdata = {
-	.name = "tv",
-	.source = "venc.0",
-	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
-	.invert_polarity = false,
-};
-
-static struct platform_device beagle_tv_connector_device = {
-	.name                   = "connector-analog-tv",
-	.id                     = 0,
-	.dev.platform_data      = &beagle_tv_pdata,
-};
-
-static struct omap_dss_board_info beagle_dss_data = {
-	.default_display_name = "dvi",
-};
-
-#include "sdram-micron-mt46h32m32lf-6.h"
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_wp	= -EINVAL,
-		.deferred	= true,
-	},
-	{}	/* Terminator */
-};
-
-static struct regulator_consumer_supply beagle_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply beagle_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-static struct gpio_led gpio_leds[];
-
-static struct usbhs_phy_data phy_data[] = {
-	{
-		.port = 2,
-		.reset_gpio = 147,
-		.vcc_gpio = -1,		/* updated in beagle_twl_gpio_setup */
-		.vcc_polarity = 1,	/* updated in beagle_twl_gpio_setup */
-	},
-};
-
-static int beagle_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	int r;
-
-	mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	/*
-	 * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
-	 * high / others active low)
-	 * DVI reset GPIO is different between beagle revisions
-	 */
-	/* Valid for all -xM revisions */
-	if (cpu_is_omap3630()) {
-		/*
-		 * gpio + 1 on Xm controls the TFP410's enable line (active low)
-		 * gpio + 2 control varies depending on the board rev as below:
-		 * P7/P8 revisions(prototype): Camera EN
-		 * A2+ revisions (production): LDO (DVI, serial, led blocks)
-		 */
-		r = gpio_request_one(gpio + 1, GPIOF_OUT_INIT_LOW,
-				     "nDVI_PWR_EN");
-		if (r)
-			pr_err("%s: unable to configure nDVI_PWR_EN\n",
-				__func__);
-
-		beagle_config.dvi_pd_gpio = gpio + 2;
-
-	} else {
-		/*
-		 * REVISIT: need ehci-omap hooks for external VBUS
-		 * power switch and overcurrent detect
-		 */
-		if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
-			pr_err("%s: unable to configure EHCI_nOC\n", __func__);
-	}
-	beagle_tfp410_pdata.power_down_gpio = beagle_config.dvi_pd_gpio;
-
-	platform_device_register(&beagle_tfp410_device);
-	platform_device_register(&beagle_dvi_connector_device);
-	platform_device_register(&beagle_tv_connector_device);
-
-	/* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */
-	phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX;
-	phy_data[0].vcc_polarity = beagle_config.usb_pwr_level;
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data beagle_gpio_data = {
-	.use_leds	= true,
-	.pullups	= BIT(1),
-	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
-				| BIT(15) | BIT(16) | BIT(17),
-	.setup		= beagle_twl_gpio_setup,
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data beagle_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(beagle_vmmc1_supply),
-	.consumer_supplies	= beagle_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data beagle_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(beagle_vsim_supply),
-	.consumer_supplies	= beagle_vsim_supply,
-};
-
-static struct twl4030_platform_data beagle_twldata = {
-	/* platform_data for children goes here */
-	.gpio		= &beagle_gpio_data,
-	.vmmc1		= &beagle_vmmc1,
-	.vsim		= &beagle_vsim,
-};
-
-static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
-       {
-               I2C_BOARD_INFO("eeprom", 0x50),
-       },
-};
-
-static int __init omap3_beagle_i2c_init(void)
-{
-	omap3_pmic_get_config(&beagle_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
-			TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	beagle_twldata.vpll2->constraints.name = "VDVI";
-
-	omap3_pmic_init("twl4030", &beagle_twldata);
-	/* Bus 3 is attached to the DVI port where devices like the pico DLP
-	 * projector don't work reliably with 400kHz */
-	omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom));
-	return 0;
-}
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "beagleboard::usr0",
-		.default_trigger	= "heartbeat",
-		.gpio			= 150,
-	},
-	{
-		.name			= "beagleboard::usr1",
-		.default_trigger	= "mmc0",
-		.gpio			= 149,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
-};
-
-static struct gpio_keys_button gpio_buttons[] = {
-	{
-		.code			= BTN_EXTRA,
-		/* Dynamically assigned depending on board */
-		.gpio			= -EINVAL,
-		.desc			= "user",
-		.wakeup			= 1,
-	},
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
-	.buttons	= gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device keys_gpio = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_key_info,
-	},
-};
-
-static struct platform_device madc_hwmon = {
-	.name	= "twl4030_madc_hwmon",
-	.id	= -1,
-};
-
-static struct platform_device *omap3_beagle_devices[] __initdata = {
-	&leds_gpio,
-	&keys_gpio,
-	&madc_hwmon,
-	&leds_pwm,
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static int __init beagle_opp_init(void)
-{
-	int r = 0;
-
-	if (!machine_is_omap3_beagle())
-		return 0;
-
-	/* Initialize the omap3 opp table if not already created. */
-	r = omap3_opp_init();
-	if (r < 0 && (r != -EEXIST)) {
-		pr_err("%s: opp default init failed\n", __func__);
-		return r;
-	}
-
-	/* Custom OPP enabled for all xM versions */
-	if (cpu_is_omap3630()) {
-		struct device *mpu_dev, *iva_dev;
-
-		mpu_dev = get_cpu_device(0);
-		iva_dev = omap_device_get_by_hwmod_name("iva");
-
-		if (!mpu_dev || IS_ERR(iva_dev)) {
-			pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
-				__func__, mpu_dev, iva_dev);
-			return -ENODEV;
-		}
-		/* Enable MPU 1GHz and lower opps */
-		r = dev_pm_opp_enable(mpu_dev, 800000000);
-		/* TODO: MPU 1GHz needs SR and ABB */
-
-		/* Enable IVA 800MHz and lower opps */
-		r |= dev_pm_opp_enable(iva_dev, 660000000);
-		/* TODO: DSP 800MHz needs SR and ABB */
-		if (r) {
-			pr_err("%s: failed to enable higher opp %d\n",
-				__func__, r);
-			/*
-			 * Cleanup - disable the higher freqs - we dont care
-			 * about the results
-			 */
-			dev_pm_opp_disable(mpu_dev, 800000000);
-			dev_pm_opp_disable(iva_dev, 660000000);
-		}
-	}
-	return 0;
-}
-omap_device_initcall(beagle_opp_init);
-
-static void __init omap3_beagle_init(void)
-{
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap3_beagle_init_rev();
-
-	if (gpio_is_valid(beagle_config.mmc1_gpio_wp))
-		omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
-	mmc[0].caps = beagle_config.mmc_caps;
-	omap_hsmmc_init(mmc);
-
-	omap3_beagle_i2c_init();
-
-	gpio_buttons[0].gpio = beagle_config.usr_button_gpio;
-
-	platform_add_devices(omap3_beagle_devices,
-			ARRAY_SIZE(omap3_beagle_devices));
-	if (gpio_is_valid(beagle_config.dvi_pd_gpio))
-		omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT);
-	omap_display_init(&beagle_dss_data);
-
-	omap_serial_init();
-	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-
-	usbhs_init(&usbhs_bdata);
-
-	board_nand_init(omap3beagle_nand_partitions,
-			ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
-			NAND_BUSWIDTH_16, NULL);
-	omap_twl4030_audio_init("omap3beagle", NULL);
-
-	/* Ensure msecure is mux'd to be able to set the RTC. */
-	omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
-
-	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
-	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
-	pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
-}
-
-MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
-	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= omap3_beagle_init,
-	.init_late	= omap3_init_late,
-	.init_time	= omap3_secure_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
-- 
cgit v1.2.3


From 9a55706221812e4b609320ed41b7b149da981e51 Mon Sep 17 00:00:00 2001
From: Benoit Parrot <bparrot@ti.com>
Date: Fri, 8 May 2015 13:01:09 -0600
Subject: ARM: AM43xx: hwmod: add VPFE hwmod entries

This patch adds VPFE HWMOD data for AM43xx.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Tested-by: Benoit Parrot <bparrot@ti.com>
[paul@pwsan.com: updated to apply on v4.1-rc1]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 70 ++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/prcm43xx.h             |  3 +-
 2 files changed, 72 insertions(+), 1 deletion(-)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index e2223148ba4d..17e8004fc20f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -544,6 +544,44 @@ static struct omap_hwmod am43xx_hdq1w_hwmod = {
 	},
 };
 
+static struct omap_hwmod_class_sysconfig am43xx_vpfe_sysc = {
+	.rev_offs       = 0x0,
+	.sysc_offs      = 0x104,
+	.sysc_flags     = SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE,
+	.idlemodes      = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+				MSTANDBY_FORCE | MSTANDBY_SMART | MSTANDBY_NO),
+	.sysc_fields    = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am43xx_vpfe_hwmod_class = {
+	.name           = "vpfe",
+	.sysc           = &am43xx_vpfe_sysc,
+};
+
+static struct omap_hwmod am43xx_vpfe0_hwmod = {
+	.name           = "vpfe0",
+	.class          = &am43xx_vpfe_hwmod_class,
+	.clkdm_name     = "l3s_clkdm",
+	.prcm           = {
+		.omap4  = {
+			.modulemode     = MODULEMODE_SWCTRL,
+			.clkctrl_offs   = AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_vpfe1_hwmod = {
+	.name           = "vpfe1",
+	.class          = &am43xx_vpfe_hwmod_class,
+	.clkdm_name     = "l3s_clkdm",
+	.prcm           = {
+		.omap4  = {
+			.modulemode     = MODULEMODE_SWCTRL,
+			.clkctrl_offs   = AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET,
+		},
+	},
+};
+
 /* Interfaces */
 static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
 	.master		= &am33xx_l3_main_hwmod,
@@ -825,6 +863,34 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__hdq1w = {
 	.user           = OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+static struct omap_hwmod_ocp_if am43xx_l3__vpfe0 = {
+	.master         = &am43xx_vpfe0_hwmod,
+	.slave          = &am33xx_l3_main_hwmod,
+	.clk            = "l3_gclk",
+	.user           = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l3__vpfe1 = {
+	.master         = &am43xx_vpfe1_hwmod,
+	.slave          = &am33xx_l3_main_hwmod,
+	.clk            = "l3_gclk",
+	.user           = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__vpfe0 = {
+	.master         = &am33xx_l4_ls_hwmod,
+	.slave          = &am43xx_vpfe0_hwmod,
+	.clk            = "l4ls_gclk",
+	.user           = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__vpfe1 = {
+	.master         = &am33xx_l4_ls_hwmod,
+	.slave          = &am43xx_vpfe1_hwmod,
+	.clk            = "l4ls_gclk",
+	.user           = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l4_wkup__synctimer,
 	&am43xx_l4_ls__timer8,
@@ -925,6 +991,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am43xx_l4_ls__dss_dispc,
 	&am43xx_l4_ls__dss_rfbi,
 	&am43xx_l4_ls__hdq1w,
+	&am43xx_l3__vpfe0,
+	&am43xx_l3__vpfe1,
+	&am43xx_l4_ls__vpfe0,
+	&am43xx_l4_ls__vpfe1,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index 48df3b55057e..d0261996db6d 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -144,5 +144,6 @@
 #define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET	0x05C0
 #define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET		0x0a20
 #define AM43XX_CM_PER_HDQ1W_CLKCTRL_OFFSET		0x04a0
-
+#define AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET		0x0068
+#define AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET		0x0070
 #endif
-- 
cgit v1.2.3


From 4ebf5b288c57767ad62e63c5fc0e586f0210e36c Mon Sep 17 00:00:00 2001
From: Tero Kristo <t-kristo@ti.com>
Date: Tue, 5 May 2015 16:33:04 +0300
Subject: ARM: OMAP4+: PRM: add support for passing status register/bit info to
 reset

AM43xx has slightly different reset register layout compared to OMAP4+,
with varying status bit shifts and status register offsets. Current
code assumes static offsets and identical status / reset control bit
shifts, which is wrong. This patch adds PRM core support for passing
the actual implementations from hwmod code. AM43xx mappings will be fixed
in subsequent patch.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reported-by: Dave Gerlach <d-gerlach@ti.com>
Reported-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/omap_hwmod.c  | 12 ++++++++++--
 arch/arm/mach-omap2/prminst44xx.c | 20 +++++++-------------
 2 files changed, 17 insertions(+), 15 deletions(-)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 355b08936871..e482562075ef 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -171,6 +171,12 @@
  */
 #define LINKS_PER_OCP_IF		2
 
+/*
+ * Address offset (in bytes) between the reset control and the reset
+ * status registers: 4 bytes on OMAP4
+ */
+#define OMAP4_RST_CTRL_ST_OFFSET	4
+
 /**
  * struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations
  * @enable_module: function to enable a module (via MODULEMODE)
@@ -3016,10 +3022,12 @@ static int _omap4_deassert_hardreset(struct omap_hwmod *oh,
 	if (ohri->st_shift)
 		pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
 		       oh->name, ohri->name);
-	return omap_prm_deassert_hardreset(ohri->rst_shift, 0,
+	return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->rst_shift,
 					   oh->clkdm->pwrdm.ptr->prcm_partition,
 					   oh->clkdm->pwrdm.ptr->prcm_offs,
-					   oh->prcm.omap4.rstctrl_offs, 0);
+					   oh->prcm.omap4.rstctrl_offs,
+					   oh->prcm.omap4.rstctrl_offs +
+					   OMAP4_RST_CTRL_ST_OFFSET);
 }
 
 /**
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index c4859c4d3646..d0b15dbafa2e 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -87,12 +87,6 @@ u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
 	return v;
 }
 
-/*
- * Address offset (in bytes) between the reset control and the reset
- * status registers: 4 bytes on OMAP4
- */
-#define OMAP4_RST_CTRL_ST_OFFSET		4
-
 /**
  * omap4_prminst_is_hardreset_asserted - read the HW reset line state of
  * submodules contained in the hwmod module
@@ -141,11 +135,11 @@ int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
  * omap4_prminst_deassert_hardreset - deassert a submodule hardreset line and
  * wait
  * @shift: register bit shift corresponding to the reset line to deassert
- * @st_shift: status bit offset, not used for OMAP4+
+ * @st_shift: status bit offset corresponding to the reset line
  * @part: PRM partition
  * @inst: PRM instance offset
  * @rstctrl_offs: reset register offset
- * @st_offs: reset status register offset, not used for OMAP4+
+ * @rstst_offs: reset status register offset
  *
  * Some IPs like dsp, ipu or iva contain processors that require an HW
  * reset line to be asserted / deasserted in order to fully enable the
@@ -157,11 +151,11 @@ int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
  * of reset, or -EBUSY if the submodule did not exit reset promptly.
  */
 int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 inst,
-				     u16 rstctrl_offs, u16 st_offs)
+				     u16 rstctrl_offs, u16 rstst_offs)
 {
 	int c;
 	u32 mask = 1 << shift;
-	u16 rstst_offs = rstctrl_offs + OMAP4_RST_CTRL_ST_OFFSET;
+	u32 st_mask = 1 << st_shift;
 
 	/* Check the current status to avoid de-asserting the line twice */
 	if (omap4_prminst_is_hardreset_asserted(shift, part, inst,
@@ -169,13 +163,13 @@ int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 inst,
 		return -EEXIST;
 
 	/* Clear the reset status by writing 1 to the status bit */
-	omap4_prminst_rmw_inst_reg_bits(0xffffffff, mask, part, inst,
+	omap4_prminst_rmw_inst_reg_bits(0xffffffff, st_mask, part, inst,
 					rstst_offs);
 	/* de-assert the reset control line */
 	omap4_prminst_rmw_inst_reg_bits(mask, 0, part, inst, rstctrl_offs);
 	/* wait the status to be set */
-	omap_test_timeout(omap4_prminst_is_hardreset_asserted(shift, part, inst,
-							      rstst_offs),
+	omap_test_timeout(omap4_prminst_is_hardreset_asserted(st_shift, part,
+							      inst, rstst_offs),
 			  MAX_MODULE_HARDRESET_WAIT, c);
 
 	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
-- 
cgit v1.2.3


From a5bf00cd735fbc293da8a9bada589c02861c8132 Mon Sep 17 00:00:00 2001
From: Tero Kristo <t-kristo@ti.com>
Date: Tue, 5 May 2015 16:33:05 +0300
Subject: ARM: AM33xx+: hwmod: re-use omap4 implementations for reset
 functionality

The reset code functionality is mostly a copy paste between OMAP4+ and
AM33xx+. Re-use the omap4 code where possible, and just keep the special
implementation for de-asserting the hardreset lines for AM33xx, as
AM33xx+ devices have slightly different register layouts compared to
OMAP4+. This patch also fixes the hardreset issues faced on AM43xx.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reported-by: Dave Gerlach <d-gerlach@ti.com>
Reported-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/omap_hwmod.c | 56 +++-------------------------------------
 1 file changed, 4 insertions(+), 52 deletions(-)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index e482562075ef..752969ff9de0 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -3055,27 +3055,6 @@ static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh,
 					      oh->prcm.omap4.rstctrl_offs);
 }
 
-/**
- * _am33xx_assert_hardreset - call AM33XX PRM hardreset fn with hwmod args
- * @oh: struct omap_hwmod * to assert hardreset
- * @ohri: hardreset line data
- *
- * Call am33xx_prminst_assert_hardreset() with parameters extracted
- * from the hwmod @oh and the hardreset line data @ohri.  Only
- * intended for use as an soc_ops function pointer.  Passes along the
- * return value from am33xx_prminst_assert_hardreset().  XXX This
- * function is scheduled for removal when the PRM code is moved into
- * drivers/.
- */
-static int _am33xx_assert_hardreset(struct omap_hwmod *oh,
-				   struct omap_hwmod_rst_info *ohri)
-
-{
-	return omap_prm_assert_hardreset(ohri->rst_shift, 0,
-					 oh->clkdm->pwrdm.ptr->prcm_offs,
-					 oh->prcm.omap4.rstctrl_offs);
-}
-
 /**
  * _am33xx_deassert_hardreset - call AM33XX PRM hardreset fn with hwmod args
  * @oh: struct omap_hwmod * to deassert hardreset
@@ -3091,32 +3070,13 @@ static int _am33xx_assert_hardreset(struct omap_hwmod *oh,
 static int _am33xx_deassert_hardreset(struct omap_hwmod *oh,
 				     struct omap_hwmod_rst_info *ohri)
 {
-	return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift, 0,
+	return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift,
+					   oh->clkdm->pwrdm.ptr->prcm_partition,
 					   oh->clkdm->pwrdm.ptr->prcm_offs,
 					   oh->prcm.omap4.rstctrl_offs,
 					   oh->prcm.omap4.rstst_offs);
 }
 
-/**
- * _am33xx_is_hardreset_asserted - call AM33XX PRM hardreset fn with hwmod args
- * @oh: struct omap_hwmod * to test hardreset
- * @ohri: hardreset line data
- *
- * Call am33xx_prminst_is_hardreset_asserted() with parameters
- * extracted from the hwmod @oh and the hardreset line data @ohri.
- * Only intended for use as an soc_ops function pointer.  Passes along
- * the return value from am33xx_prminst_is_hardreset_asserted().  XXX
- * This function is scheduled for removal when the PRM code is moved
- * into drivers/.
- */
-static int _am33xx_is_hardreset_asserted(struct omap_hwmod *oh,
-					struct omap_hwmod_rst_info *ohri)
-{
-	return omap_prm_is_hardreset_asserted(ohri->rst_shift, 0,
-					      oh->clkdm->pwrdm.ptr->prcm_offs,
-					      oh->prcm.omap4.rstctrl_offs);
-}
-
 /* Public functions */
 
 u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs)
@@ -3916,21 +3876,13 @@ void __init omap_hwmod_init(void)
 		soc_ops.init_clkdm = _init_clkdm;
 		soc_ops.update_context_lost = _omap4_update_context_lost;
 		soc_ops.get_context_lost = _omap4_get_context_lost;
-	} else if (soc_is_am43xx()) {
+	} else if (cpu_is_ti816x() || soc_is_am33xx() || soc_is_am43xx()) {
 		soc_ops.enable_module = _omap4_enable_module;
 		soc_ops.disable_module = _omap4_disable_module;
 		soc_ops.wait_target_ready = _omap4_wait_target_ready;
 		soc_ops.assert_hardreset = _omap4_assert_hardreset;
-		soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
-		soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
-		soc_ops.init_clkdm = _init_clkdm;
-	} else if (cpu_is_ti816x() || soc_is_am33xx()) {
-		soc_ops.enable_module = _omap4_enable_module;
-		soc_ops.disable_module = _omap4_disable_module;
-		soc_ops.wait_target_ready = _omap4_wait_target_ready;
-		soc_ops.assert_hardreset = _am33xx_assert_hardreset;
 		soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
-		soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted;
+		soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
 		soc_ops.init_clkdm = _init_clkdm;
 	} else {
 		WARN(1, "omap_hwmod: unknown SoC type\n");
-- 
cgit v1.2.3


From b0897972edfa42b4af5c3189b2b7a7fac5867828 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 11 May 2015 13:18:19 -0700
Subject: ARM: OMAP2+: Remove bogus struct clk comparison for timer clock

With recent changes to use determine_rate, the comparison of two
clocks won't work without clk_is_match that does __clk_get_hw
on the clocks first.

As we've been unconditionally already calling clk_set_parent
already because of the bogus comparison, let's just remove the
check as suggested by Stephen Boyd <sboyd@codeaurora.org>.

Cc: Michael Turquette <mturquette@linaro.org>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/timer.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index cef67af9e9b8..cac46d852da1 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -298,14 +298,11 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	if (IS_ERR(src))
 		return PTR_ERR(src);
 
-	if (clk_get_parent(timer->fclk) != src) {
-		r = clk_set_parent(timer->fclk, src);
-		if (r < 0) {
-			pr_warn("%s: %s cannot set source\n", __func__,
-				oh->name);
-			clk_put(src);
-			return r;
-		}
+	r = clk_set_parent(timer->fclk, src);
+	if (r < 0) {
+		pr_warn("%s: %s cannot set source\n", __func__, oh->name);
+		clk_put(src);
+		return r;
 	}
 
 	clk_put(src);
-- 
cgit v1.2.3


From c381f22947ea9afa55311dfe672dd73b92f01e6e Mon Sep 17 00:00:00 2001
From: Grygorii Strashko <Grygorii.Strashko@linaro.org>
Date: Mon, 27 Apr 2015 21:24:32 +0300
Subject: ARM: omap-device: use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS

Use recently introduced macro SET_NOIRQ_SYSTEM_SLEEP_PM_OPS to
set up PM callbacks. This also fixes missed assignment of
.poweroff_noirq() callback.

Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 arch/arm/mach-omap2/omap_device.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 166b18f515a2..83a0f5ab85c2 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -688,11 +688,8 @@ struct dev_pm_domain omap_device_pm_domain = {
 		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
 				   NULL)
 		USE_PLATFORM_PM_SLEEP_OPS
-		.suspend_noirq = _od_suspend_noirq,
-		.resume_noirq = _od_resume_noirq,
-		.freeze_noirq = _od_suspend_noirq,
-		.thaw_noirq = _od_resume_noirq,
-		.restore_noirq = _od_resume_noirq,
+		SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq,
+					      _od_resume_noirq)
 	}
 };
 
-- 
cgit v1.2.3


From 6a53bc750004fdab11494e9e6c864b4a425fc1a1 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Thu, 14 May 2015 16:18:46 +0100
Subject: ARM: Show proper respect for Heinrich Hertz by using the correct unit
 for frequency
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The SI unit of frequency is Hertz, named after Heinrich Hertz, and is
given the symbol "Hz" to denote this.  "hz" is not the unit of frequency,
and is in fact meaningless.

Fix arch/arm to correctly use "Hz", thereby acknowledging Heinrich Hertz'
contribution to the modern world.

Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/boot/dts/exynos5260-xyref5260.dts   | 2 +-
 arch/arm/boot/dts/omap3-cm-t3517.dts         | 2 +-
 arch/arm/mach-davinci/include/mach/da8xx.h   | 2 +-
 arch/arm/mach-imx/clk-imx6sx.c               | 4 ++--
 arch/arm/mach-iop13xx/include/mach/time.h    | 2 +-
 arch/arm/mach-ixp4xx/include/mach/platform.h | 2 +-
 arch/arm/mach-ks8695/include/mach/hardware.h | 2 +-
 arch/arm/mach-omap2/gpmc-onenand.c           | 4 ++--
 arch/arm/mach-omap2/hsmmc.c                  | 2 +-
 arch/arm/mach-omap2/opp2430_data.c           | 4 ++--
 arch/arm/mach-omap2/sdrc2xxx.c               | 2 +-
 arch/arm/mach-omap2/sram242x.S               | 2 +-
 arch/arm/mach-omap2/sram243x.S               | 2 +-
 arch/arm/mach-pxa/mp900.c                    | 2 +-
 14 files changed, 17 insertions(+), 17 deletions(-)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
index a803b605051b..3daef94bee38 100644
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -70,7 +70,7 @@
 	broken-cd;
 	bypass-smu;
 	cap-mmc-highspeed;
-	supports-hs200-mode; /* 200 Mhz */
+	supports-hs200-mode; /* 200 MHz */
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts
index f5b5a1d96cd7..53ae04f9104d 100644
--- a/arch/arm/boot/dts/omap3-cm-t3517.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3517.dts
@@ -66,7 +66,7 @@
 
 	otg_drv_vbus: pinmux_otg_drv_vbus {
 		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50Mhz_clk.usb0_drvvbus */
+			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50MHz_clk.usb0_drvvbus */
 		>;
 	};
 
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 39e58b48e826..f9f9713aacdd 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -36,7 +36,7 @@ extern void __iomem *da8xx_syscfg1_base;
 
 /*
  * If the DA850/OMAP-L138/AM18x SoC on board is of a higher speed grade
- * (than the regular 300Mhz variant), the board code should set this up
+ * (than the regular 300MHz variant), the board code should set this up
  * with the supported speed before calling da850_register_cpufreq().
  */
 extern unsigned int da850_max_speed;
diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c
index 5a3e5a159e70..87c5b0911ddd 100644
--- a/arch/arm/mach-imx/clk-imx6sx.c
+++ b/arch/arm/mach-imx/clk-imx6sx.c
@@ -216,7 +216,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SX_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
 	clks[IMX6SX_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
 
-	/* FIXME 100Mhz is used for pcie ref for all imx6 pcie, excepted imx6q */
+	/* FIXME 100MHz is used for pcie ref for all imx6 pcie, excepted imx6q */
 	clks[IMX6SX_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 5);
 	clks[IMX6SX_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
 
@@ -520,7 +520,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 		pr_err("Failed to set pcie parent clk.\n");
 
 	/*
-	 * Init enet system AHB clock, set to 200Mhz
+	 * Init enet system AHB clock, set to 200MHz
 	 * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB
 	 */
 	clk_set_parent(clks[IMX6SX_CLK_ENET_PRE_SEL], clks[IMX6SX_CLK_PLL2_PFD2]);
diff --git a/arch/arm/mach-iop13xx/include/mach/time.h b/arch/arm/mach-iop13xx/include/mach/time.h
index 15bc9bb78a6b..c871e6874594 100644
--- a/arch/arm/mach-iop13xx/include/mach/time.h
+++ b/arch/arm/mach-iop13xx/include/mach/time.h
@@ -42,7 +42,7 @@ static inline unsigned long iop13xx_core_freq(void)
 	case IOP13XX_CORE_FREQ_1200:
 		return 1200000000;
 	default:
-		printk("%s: warning unknown frequency, defaulting to 800Mhz\n",
+		printk("%s: warning unknown frequency, defaulting to 800MHz\n",
 			__func__);
 	}
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index 75c4c6572ad0..34b3d3f3f131 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -74,7 +74,7 @@ extern unsigned long ixp4xx_exp_bus_size;
 /*
  * Clock Speed Definitions.
  */
-#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66Mhzi APB BUS   */ 
+#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66MHzi APB BUS   */ 
 #define IXP4XX_UART_XTAL        	14745600
 
 /*
diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h
index 5090338c0db2..959c748ee8bb 100644
--- a/arch/arm/mach-ks8695/include/mach/hardware.h
+++ b/arch/arm/mach-ks8695/include/mach/hardware.h
@@ -17,7 +17,7 @@
 #include <asm/sizes.h>
 
 /*
- * Clocks are derived from MCLK, which is 25Mhz
+ * Clocks are derived from MCLK, which is 25MHz
  */
 #define KS8695_CLOCK_RATE	25000000
 
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index f899e77ff5e6..17a6f752a436 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -216,11 +216,11 @@ static void omap2_onenand_calc_sync_timings(struct gpmc_timings *t,
 
 	div = gpmc_calc_divider(min_gpmc_clk_period);
 	gpmc_clk_ns = gpmc_ticks_to_ns(div);
-	if (gpmc_clk_ns < 15) /* >66Mhz */
+	if (gpmc_clk_ns < 15) /* >66MHz */
 		onenand_flags |= ONENAND_FLAG_HF;
 	else
 		onenand_flags &= ~ONENAND_FLAG_HF;
-	if (gpmc_clk_ns < 12) /* >83Mhz */
+	if (gpmc_clk_ns < 12) /* >83MHz */
 		onenand_flags |= ONENAND_FLAG_VHF;
 	else
 		onenand_flags &= ~ONENAND_FLAG_VHF;
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 9a8611ab5dfa..cff079e563f4 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -70,7 +70,7 @@ static void omap_hsmmc1_before_set_reg(struct device *dev,
 
 		reg = omap_ctrl_readl(control_pbias_offset);
 		if (cpu_is_omap3630()) {
-			/* Set MMC I/O to 52Mhz */
+			/* Set MMC I/O to 52MHz */
 			prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
 			prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
 			omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c
index 0e75ec3e114b..b2233b72b24d 100644
--- a/arch/arm/mach-omap2/opp2430_data.c
+++ b/arch/arm/mach-omap2/opp2430_data.c
@@ -116,7 +116,7 @@ const struct prcm_config omap2430_rate_table[] = {
 		RATE_IN_243X},
 
 	/* PRCM-boot/bypass */
-	{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,		/* 13Mhz */
+	{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,		/* 13MHz */
 		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
 		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
 		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
@@ -124,7 +124,7 @@ const struct prcm_config omap2430_rate_table[] = {
 		RATE_IN_243X},
 
 	/* PRCM-boot/bypass */
-	{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,		/* 12Mhz */
+	{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,		/* 12MHz */
 		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
 		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
 		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index ae3f1553158d..339b0ecb7c32 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -164,6 +164,6 @@ void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode)
 	mem_timings.slow_dll_ctrl |=
 		((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2));
 
-	/* 90 degree phase for anything below 133Mhz + disable DLL filter */
+	/* 90 degree phase for anything below 133MHz + disable DLL filter */
 	mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
 }
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 2c88ff2d0236..53a2537cd75a 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -64,7 +64,7 @@ ENTRY(omap242x_sram_ddr_init)
 	mvn	r9, #0x4		@ mask to get clear bit2
 	and	r10, r10, r9		@ clear bit2 for lock mode.
 	orr	r10, r10, #0x8		@ make sure DLL on (es2 bit pos)
-	orr	r10, r10, #0x2		@ 90 degree phase for all below 133Mhz
+	orr	r10, r10, #0x2		@ 90 degree phase for all below 133MHz
 	str	r10, [r11]		@ commit to DLLA_CTRL
 	bl	i_dll_wait		@ wait for dll to lock
 
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index d5deb9761fc7..b3edd6f7f7db 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -64,7 +64,7 @@ ENTRY(omap243x_sram_ddr_init)
 	mvn	r9, #0x4		@ mask to get clear bit2
 	and	r10, r10, r9		@ clear bit2 for lock mode.
 	orr	r10, r10, #0x8		@ make sure DLL on (es2 bit pos)
-	orr	r10, r10, #0x2		@ 90 degree phase for all below 133Mhz
+	orr	r10, r10, #0x2		@ 90 degree phase for all below 133MHz
 	str	r10, [r11]		@ commit to DLLA_CTRL
 	bl	i_dll_wait		@ wait for dll to lock
 
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 854f1f562d6b..14f6aaf8fcc9 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -28,7 +28,7 @@
 static void isp116x_pfm_delay(struct device *dev, int delay)
 {
 
-	/* 400Mhz PXA2 = 2.5ns / instruction */
+	/* 400MHz PXA2 = 2.5ns / instruction */
 
 	int cyc = delay / 10;
 
-- 
cgit v1.2.3


From b96b332fd518cd4d08104bc5ca552ac1ade7e2c7 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 20 May 2015 09:23:43 -0700
Subject: ARM: OMAP3: Add support for configuring MMC pins as GPIO pins

Some devices are using the MMC1 pins 4..8 as GPIO pins, and in
this case they need to be configured for 1.8V IO voltage if not
done by the bootloader as otherwise some devices like smsc911x
won't work properly.

Let's also make sure this register is saved and restored for
idle.

Cc: Tim Nordell <tim.nordell@logicpd.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/control.c      |  3 +++
 arch/arm/mach-omap2/control.h      |  3 +++
 arch/arm/mach-omap2/pdata-quirks.c | 22 ++++++++++++++++++++++
 3 files changed, 28 insertions(+)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index af95a624fe71..f008930277ed 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -112,6 +112,7 @@ struct omap3_control_regs {
 	u32 csirxfe;
 	u32 iva2_bootaddr;
 	u32 iva2_bootmod;
+	u32 wkup_ctrl;
 	u32 debobs_0;
 	u32 debobs_1;
 	u32 debobs_2;
@@ -455,6 +456,7 @@ void omap3_control_save_context(void)
 			omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR);
 	control_context.iva2_bootmod =
 			omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD);
+	control_context.wkup_ctrl = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL);
 	control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0));
 	control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1));
 	control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2));
@@ -512,6 +514,7 @@ void omap3_control_restore_context(void)
 					OMAP343X_CONTROL_IVA2_BOOTADDR);
 	omap_ctrl_writel(control_context.iva2_bootmod,
 					OMAP343X_CONTROL_IVA2_BOOTMOD);
+	omap_ctrl_writel(control_context.wkup_ctrl, OMAP34XX_CONTROL_WKUP_CTRL);
 	omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0));
 	omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1));
 	omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2));
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index 80d2b7d8e36e..ec406bc2c6d4 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -231,6 +231,9 @@
 #define OMAP343X_PADCONF_ETK_D15	OMAP343X_PADCONF_ETK(17)
 
 /* 34xx GENERAL_WKUP register offsets */
+#define OMAP34XX_CONTROL_WKUP_CTRL	(OMAP343X_CONTROL_GENERAL_WKUP - 0x4)
+#define OMAP36XX_GPIO_IO_PWRDNZ		BIT(6)
+
 #define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \
 						0x008 + (i))
 #define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008)
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index af11511dda50..821171cf6b7d 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -44,6 +44,27 @@ static void __init omap2420_n8x0_legacy_init(void)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP3
+/*
+ * Configures GPIOs 126, 127 and 129 to 1.8V mode instead of 3.0V
+ * mode for MMC1 in case bootloader did not configure things.
+ * Note that if the pins are used for MMC1, pbias-regulator
+ * manages the IO voltage.
+ */
+static void __init omap3_gpio126_127_129(void)
+{
+	u32 reg;
+
+	reg = omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
+	reg &= ~OMAP343X_PBIASLITEVMODE1;
+	reg |= OMAP343X_PBIASLITEPWRDNZ1;
+	omap_ctrl_writel(reg, OMAP343X_CONTROL_PBIAS_LITE);
+	if (cpu_is_omap3630()) {
+		reg = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL);
+		reg |= OMAP36XX_GPIO_IO_PWRDNZ;
+		omap_ctrl_writel(reg, OMAP34XX_CONTROL_WKUP_CTRL);
+	}
+}
+
 static void __init hsmmc2_internal_input_clk(void)
 {
 	u32 reg;
@@ -356,6 +377,7 @@ static struct pdata_init pdata_quirks[] __initdata = {
 	{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
 	{ "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
 	{ "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
+	{ "logicpd,dm3730-torpedo-devkit", omap3_gpio126_127_129, },
 	{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
 	{ "ti,am3517-evm", am3517_evm_legacy_init, },
 	{ "technexion,omap3-tao3530", omap3_tao3530_legacy_init, },
-- 
cgit v1.2.3


From 026df6ca90cf56aa756dd5ed077a6e90a523eff7 Mon Sep 17 00:00:00 2001
From: Alexander Kuleshov <kuleshovmail@gmail.com>
Date: Tue, 17 Mar 2015 16:45:44 +0600
Subject: ARM: OMAP2+: use symbolic defines for console loglevels instead of
 numbers

<linux/printk.h> provides macros for console log level, let's use it
instead of numbers.

Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/serial.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 57dee0c7cd2b..5fb50fe54153 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -203,7 +203,7 @@ static int __init omap_serial_early_init(void)
 		if (cmdline_find_option(uart_name)) {
 			console_uart_id = uart->num;
 
-			if (console_loglevel >= 10) {
+			if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG) {
 				uart_debug = true;
 				pr_info("%s used as console in debug mode: uart%d clocks will not be gated",
 					uart_name, uart->num);
-- 
cgit v1.2.3


From 8297955f3bd44b7b5a69549ed95e851b473bb675 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Date: Mon, 27 Apr 2015 21:49:44 +0900
Subject: ARM: OMAP2+: Constify irq_domain_ops

The irq_domain_ops are not modified by the driver and the irqdomain core
code accepts pointer to a const data.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap-wakeupgen.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 3b56722dfd8a..8e52621b5a6b 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -444,7 +444,7 @@ static int wakeupgen_domain_alloc(struct irq_domain *domain,
 	return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_args);
 }
 
-static struct irq_domain_ops wakeupgen_domain_ops = {
+static const struct irq_domain_ops wakeupgen_domain_ops = {
 	.xlate	= wakeupgen_domain_xlate,
 	.alloc	= wakeupgen_domain_alloc,
 	.free	= irq_domain_free_irqs_common,
-- 
cgit v1.2.3


From 87a2028f2329b8f091046316ee1910b97d3854b1 Mon Sep 17 00:00:00 2001
From: Nicholas Krause <xerofoify@gmail.com>
Date: Sun, 10 May 2015 00:57:34 -0400
Subject: ARM: OMAP2+: Remove calls to deprecacted marco,PTR_RET in the
 files,fb.c and pmu.c

This removes two calls to the deprecated marco,PTR_RET in
the files,fb.c and pmu.c for the functions,omap_init_vrfb
and omap_init_pmu respectfully. Furthermore these are now
replaced by calling the correctly non deprecacted function,
PTR_ERR_OR_ZERO in both functions.

Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/fb.c  | 2 +-
 arch/arm/mach-omap2/pmu.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/fb.c b/arch/arm/mach-omap2/fb.c
index 26e28e94f625..1f1ecf8807eb 100644
--- a/arch/arm/mach-omap2/fb.c
+++ b/arch/arm/mach-omap2/fb.c
@@ -84,7 +84,7 @@ int __init omap_init_vrfb(void)
 	pdev = platform_device_register_resndata(NULL, "omapvrfb", -1,
 			res, num_res, NULL, 0);
 
-	return PTR_RET(pdev);
+	return PTR_ERR_OR_ZERO(pdev);
 }
 #else
 int __init omap_init_vrfb(void) { return 0; }
diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c
index a69e9a33cb6d..d2adfebd3b3f 100644
--- a/arch/arm/mach-omap2/pmu.c
+++ b/arch/arm/mach-omap2/pmu.c
@@ -55,7 +55,7 @@ static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[])
 	WARN(IS_ERR(omap_pmu_dev), "Can't build omap_device for %s.\n",
 	     dev_name);
 
-	return PTR_RET(omap_pmu_dev);
+	return PTR_ERR_OR_ZERO(omap_pmu_dev);
 }
 
 static int __init omap_init_pmu(void)
-- 
cgit v1.2.3


From e44be50cba8b29f373bb8d744e91eaa30c4dd178 Mon Sep 17 00:00:00 2001
From: Nicholas Krause <xerofoify@gmail.com>
Date: Wed, 20 May 2015 15:32:26 -0400
Subject: mach-omap2: Remove use of deprecated marco, PTR_RET in devices.c

This removes the deprecacted marco, PTR_RET and changes the
functions that use this marco in their return statement to
instead use the non deprecacted function, PTR_ERR_OR_ZERO
for the file devices.c.

Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/devices.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 990338fbaa59..a69bd67e9028 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -63,7 +63,7 @@ static int __init omap3_l3_init(void)
 
 	WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
 
-	return PTR_RET(pdev);
+	return PTR_ERR_OR_ZERO(pdev);
 }
 omap_postcore_initcall(omap3_l3_init);
 
@@ -333,6 +333,6 @@ static int __init omap_gpmc_init(void)
 	pdev = omap_device_build("omap-gpmc", -1, oh, NULL, 0);
 	WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
 
-	return PTR_RET(pdev);
+	return PTR_ERR_OR_ZERO(pdev);
 }
 omap_postcore_initcall(omap_gpmc_init);
-- 
cgit v1.2.3


From d8a50941c91a68da202aaa96a3dacd471ea9c693 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 28 May 2015 07:22:08 -0700
Subject: ARM: OMAP3: Fix booting with thumb2 kernel

We get a NULL pointer dereference on omap3 for thumb2 compiled kernels:

Internal error: Oops: 80000005 [#1] SMP THUMB2
...
[<c046497b>] (_raw_spin_unlock_irqrestore) from [<c0024375>]
(omap3_enter_idle_bm+0xc5/0x178)
[<c0024375>] (omap3_enter_idle_bm) from [<c0374e63>]
(cpuidle_enter_state+0x77/0x27c)
[<c0374e63>] (cpuidle_enter_state) from [<c00627f1>]
(cpu_startup_entry+0x155/0x23c)
[<c00627f1>] (cpu_startup_entry) from [<c06b9a47>]
(start_kernel+0x32f/0x338)
[<c06b9a47>] (start_kernel) from [<8000807f>] (0x8000807f)

The power management related assembly on omaps needs to interact with
ARM mode bootrom code, so we need to keep most of the related assembly
in ARM mode.

Turns out this error is because of missing ENDPROC for assembly code
as suggested by Stephen Boyd <sboyd@codeaurora.org>. Let's fix the
problem by adding ENDPROC in two places to sleep34xx.S.

Let's also remove the now duplicate custom code for mode switching.
This has been unnecessary since commit 6ebbf2ce437b ("ARM: convert
all "mov.* pc, reg" to "bx reg" for ARMv6+").

And let's also remove the comments about local variables, they are
now just confusing after the ENDPROC.

The reason why ENDPROC makes a difference is it sets .type and then
the compiler knows what to do with the thumb bit as explained at:

https://wiki.ubuntu.com/ARM/Thumb2PortingHowto

Reported-by: Kevin Hilman <khilman@kernel.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/sleep34xx.S | 22 ++--------------------
 1 file changed, 2 insertions(+), 20 deletions(-)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index d1dedc8195ed..eafd120b53f1 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -203,23 +203,8 @@ save_context_wfi:
 	 */
 	ldr	r1, kernel_flush
 	blx	r1
-	/*
-	 * The kernel doesn't interwork: v7_flush_dcache_all in particluar will
-	 * always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled.
-	 * This sequence switches back to ARM.  Note that .align may insert a
-	 * nop: bx pc needs to be word-aligned in order to work.
-	 */
- THUMB(	.thumb		)
- THUMB(	.align		)
- THUMB(	bx	pc	)
- THUMB(	nop		)
-	.arm
-
 	b	omap3_do_wfi
-
-/*
- * Local variables
- */
+ENDPROC(omap34xx_cpu_suspend)
 omap3_do_wfi_sram_addr:
 	.word omap3_do_wfi_sram
 kernel_flush:
@@ -364,10 +349,7 @@ exit_nonoff_modes:
  * ===================================
  */
 	ldmfd	sp!, {r4 - r11, pc}	@ restore regs and return
-
-/*
- * Local variables
- */
+ENDPROC(omap3_do_wfi)
 sdrc_power:
 	.word	SDRC_POWER_V
 cm_idlest1_core:
-- 
cgit v1.2.3


From 63aa945b1013c34b145dcf218d4ea323cbd93f86 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 1 Jun 2015 19:22:10 -0600
Subject: memory: omap-gpmc: Add Kconfig option for debug

We support decoding the bootloader values if DEBUG is defined.
But we also need to change the struct omap_hwmod flags to have
HWMOD_INIT_NO_RESET to avoid the GPMC being reset during the
boot. Otherwise just the default timings will be displayed
instead of the bootloader configured timings.

This also allows us to clean up the various GPMC related
hwmod flags. For debugging, we only need HWMOD_INIT_NO_RESET,
and HWMOD_INIT_NO_IDLE is not needed.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/omap_hwmod.h                        |  6 ++++++
 arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c      | 12 ++----------
 arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c |  3 ++-
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c              | 12 ++----------
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c              | 11 ++---------
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c               |  4 ++--
 arch/arm/mach-omap2/omap_hwmod_81xx_data.c              |  2 ++
 drivers/memory/Kconfig                                  |  8 ++++++++
 drivers/memory/omap-gpmc.c                              |  6 +++---
 9 files changed, 29 insertions(+), 35 deletions(-)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 9611c91d9b82..b5d27ec81610 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -109,6 +109,12 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3;
 
 #define DEBUG_OMAPUART_FLAGS	(HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET)
 
+#ifdef CONFIG_OMAP_GPMC_DEBUG
+#define DEBUG_OMAP_GPMC_HWMOD_FLAGS	HWMOD_INIT_NO_RESET
+#else
+#define DEBUG_OMAP_GPMC_HWMOD_FLAGS	0
+#endif
+
 #if defined(CONFIG_DEBUG_OMAP2UART1)
 #undef DEBUG_OMAP2UART1_FLAGS
 #define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index 8821b9d6bae4..6dcfd03ced8f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -762,16 +762,8 @@ struct omap_hwmod omap2xxx_gpmc_hwmod = {
 	.name		= "gpmc",
 	.class		= &omap2xxx_gpmc_hwmod_class,
 	.main_clk	= "gpmc_fck",
-	/*
-	 * XXX HWMOD_INIT_NO_RESET should not be needed for this IP
-	 * block.  It is not being added due to any known bugs with
-	 * resetting the GPMC IP block, but rather because any timings
-	 * set by the bootloader are not being correctly programmed by
-	 * the kernel from the board file or DT data.
-	 * HWMOD_INIT_NO_RESET should be removed ASAP.
-	 */
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
-			   HWMOD_NO_IDLEST),
+	/* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
+	.flags		= HWMOD_NO_IDLEST | DEBUG_OMAP_GPMC_HWMOD_FLAGS,
 	.prcm		= {
 		.omap2	= {
 			.prcm_reg_id = 3,
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index cabc5695b504..ae0cb673a3d1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -668,7 +668,8 @@ struct omap_hwmod am33xx_gpmc_hwmod = {
 	.name		= "gpmc",
 	.class		= &am33xx_gpmc_hwmod_class,
 	.clkdm_name	= "l3s_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	/* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
+	.flags		= DEBUG_OMAP_GPMC_HWMOD_FLAGS,
 	.main_clk	= "l3s_gclk",
 	.prcm		= {
 		.omap4	= {
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 4e8e93c398db..0ca4d3fb7df6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -2169,16 +2169,8 @@ static struct omap_hwmod omap3xxx_gpmc_hwmod = {
 	.clkdm_name	= "core_l3_clkdm",
 	.mpu_irqs	= omap3xxx_gpmc_irqs,
 	.main_clk	= "gpmc_fck",
-	/*
-	 * XXX HWMOD_INIT_NO_RESET should not be needed for this IP
-	 * block.  It is not being added due to any known bugs with
-	 * resetting the GPMC IP block, but rather because any timings
-	 * set by the bootloader are not being correctly programmed by
-	 * the kernel from the board file or DT data.
-	 * HWMOD_INIT_NO_RESET should be removed ASAP.
-	 */
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
-			   HWMOD_NO_IDLEST),
+	/* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
+	.flags		= HWMOD_NO_IDLEST | DEBUG_OMAP_GPMC_HWMOD_FLAGS,
 };
 
 /*
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index f5e68a782025..43eebf2c59e2 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -1188,15 +1188,8 @@ static struct omap_hwmod omap44xx_gpmc_hwmod = {
 	.name		= "gpmc",
 	.class		= &omap44xx_gpmc_hwmod_class,
 	.clkdm_name	= "l3_2_clkdm",
-	/*
-	 * XXX HWMOD_INIT_NO_RESET should not be needed for this IP
-	 * block.  It is not being added due to any known bugs with
-	 * resetting the GPMC IP block, but rather because any timings
-	 * set by the bootloader are not being correctly programmed by
-	 * the kernel from the board file or DT data.
-	 * HWMOD_INIT_NO_RESET should be removed ASAP.
-	 */
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	/* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
+	.flags		= DEBUG_OMAP_GPMC_HWMOD_FLAGS,
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_L3_2_GPMC_CLKCTRL_OFFSET,
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 0e64c2fac0b5..a0411f32e8b1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -819,8 +819,8 @@ static struct omap_hwmod dra7xx_gpmc_hwmod = {
 	.name		= "gpmc",
 	.class		= &dra7xx_gpmc_hwmod_class,
 	.clkdm_name	= "l3main1_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
-			   HWMOD_SWSUP_SIDLE),
+	/* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
+	.flags		= HWMOD_SWSUP_SIDLE | DEBUG_OMAP_GPMC_HWMOD_FLAGS,
 	.main_clk	= "l3_iclk_div",
 	.prcm = {
 		.omap4 = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
index cab1eb61ac96..c92413769144 100644
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -478,6 +478,8 @@ static struct omap_hwmod dm81xx_gpmc_hwmod = {
 	.clkdm_name	= "alwon_l3s_clkdm",
 	.class		= &dm81xx_gpmc_hwmod_class,
 	.main_clk	= "sysclk6_ck",
+	/* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
+	.flags		= DEBUG_OMAP_GPMC_HWMOD_FLAGS,
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = DM816X_CM_ALWON_GPMC_CLKCTRL,
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index 868036f70f8f..8406c668ecdc 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -49,6 +49,14 @@ config OMAP_GPMC
 	  interfacing to a variety of asynchronous as well as synchronous
 	  memory drives like NOR, NAND, OneNAND, SRAM.
 
+config OMAP_GPMC_DEBUG
+	bool
+	depends on OMAP_GPMC
+	help
+	  Enables verbose debugging mostly to decode the bootloader provided
+	  timings. Enable this during development to configure devices
+	  connected to the GPMC bus.
+
 config MVEBU_DEVBUS
 	bool "Marvell EBU Device Bus Controller"
 	default y
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index c94ea0d68746..8911e51d410a 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -403,7 +403,7 @@ static void gpmc_cs_bool_timings(int cs, const struct gpmc_bool_timings *p)
 			   p->cycle2cyclediffcsen);
 }
 
-#ifdef DEBUG
+#ifdef CONFIG_OMAP_GPMC_DEBUG
 /**
  * get_gpmc_timing_reg - read a timing parameter and print DTS settings for it.
  * @cs:      Chip Select Region
@@ -612,7 +612,7 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, int max
 	}
 
 	l = gpmc_cs_read_reg(cs, reg);
-#ifdef DEBUG
+#ifdef CONFIG_OMAP_GPMC_DEBUG
 	pr_info(
 		"GPMC CS%d: %-17s: %3d ticks, %3lu ns (was %3i ticks) %3d ns\n",
 	       cs, name, ticks, gpmc_get_clk_period(cs, cd) * ticks / 1000,
@@ -767,7 +767,7 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t,
 			    GPMC_CONFIG1_CLKACTIVATIONTIME_MAX,
 			    clk_activation, GPMC_CD_FCLK);
 
-#ifdef DEBUG
+#ifdef CONFIG_OMAP_GPMC_DEBUG
 	pr_info("GPMC CS%d CLK period is %lu ns (div %d)\n",
 			cs, (div * gpmc_get_fclk_period()) / 1000, div);
 #endif
-- 
cgit v1.2.3


From fabbe6df130a46d5b5e7484b2273d69c4be3012a Mon Sep 17 00:00:00 2001
From: Dave Gerlach <d-gerlach@ti.com>
Date: Mon, 1 Jun 2015 19:22:11 -0600
Subject: ARM: OMAP: AM43xx hwmod: Add data for am43xx emif hwmod

Without a hwmod for am43xx emif use counting for emif clockdomain does
not happen correctly so it may be shut off by pm code unintentionally.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
[paul@pwsan.com: updated to apply]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 .../mach-omap2/omap_hwmod_33xx_43xx_common_data.h  |  1 +
 .../mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c | 13 +++++++++++++
 arch/arm/mach-omap2/omap_hwmod_33xx_data.c         | 13 -------------
 arch/arm/mach-omap2/omap_hwmod_43xx_data.c         | 22 ++++++++++++++++++++++
 arch/arm/mach-omap2/prcm43xx.h                     |  2 ++
 5 files changed, 38 insertions(+), 13 deletions(-)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
index 130332c0534d..7f737965f543 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
@@ -145,6 +145,7 @@ extern struct omap_hwmod am33xx_uart5_hwmod;
 extern struct omap_hwmod am33xx_uart6_hwmod;
 extern struct omap_hwmod am33xx_wd_timer1_hwmod;
 
+extern struct omap_hwmod_class am33xx_emif_hwmod_class;
 extern struct omap_hwmod_class am33xx_l4_hwmod_class;
 extern struct omap_hwmod_class am33xx_wkup_m3_hwmod_class;
 extern struct omap_hwmod_class am33xx_control_hwmod_class;
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index ae0cb673a3d1..907a452b78ea 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -202,6 +202,19 @@ struct omap_hwmod am33xx_prcm_hwmod = {
 	.clkdm_name	= "l4_wkup_clkdm",
 };
 
+/*
+ * 'emif' class
+ * instance(s): emif
+ */
+static struct omap_hwmod_class_sysconfig am33xx_emif_sysc = {
+	.rev_offs	= 0x0000,
+};
+
+struct omap_hwmod_class am33xx_emif_hwmod_class = {
+	.name		= "emif",
+	.sysc		= &am33xx_emif_sysc,
+};
+
 /*
  * 'aes0' class
  */
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 0cf7b563dcd1..cc0791d9125b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -34,19 +34,6 @@
  * IP blocks
  */
 
-/*
- * 'emif' class
- * instance(s): emif
- */
-static struct omap_hwmod_class_sysconfig am33xx_emif_sysc = {
-	.rev_offs	= 0x0000,
-};
-
-static struct omap_hwmod_class am33xx_emif_hwmod_class = {
-	.name		= "emif",
-	.sysc		= &am33xx_emif_sysc,
-};
-
 /* emif */
 static struct omap_hwmod am33xx_emif_hwmod = {
 	.name		= "emif",
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index 17e8004fc20f..215d5efa0dba 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -24,6 +24,20 @@
 
 
 /* IP blocks */
+static struct omap_hwmod am43xx_emif_hwmod = {
+	.name		= "emif",
+	.class		= &am33xx_emif_hwmod_class,
+	.clkdm_name	= "emif_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "dpll_ddr_m2_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
 static struct omap_hwmod am43xx_l4_hs_hwmod = {
 	.name		= "l4_hs",
 	.class		= &am33xx_l4_hwmod_class,
@@ -583,6 +597,13 @@ static struct omap_hwmod am43xx_vpfe1_hwmod = {
 };
 
 /* Interfaces */
+static struct omap_hwmod_ocp_if am43xx_l3_main__emif = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am43xx_emif_hwmod,
+	.clk		= "dpll_core_m4_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
 	.master		= &am33xx_l3_main_hwmod,
 	.slave		= &am43xx_l4_hs_hwmod,
@@ -918,6 +939,7 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l3_main__l3_instr,
 	&am33xx_l3_main__gfx,
 	&am33xx_l3_s__l3_main,
+	&am43xx_l3_main__emif,
 	&am33xx_pruss__l3_main,
 	&am43xx_wkup_m3__l4_wkup,
 	&am33xx_gfx__l3_main,
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index d0261996db6d..7eebc27fa892 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -146,4 +146,6 @@
 #define AM43XX_CM_PER_HDQ1W_CLKCTRL_OFFSET		0x04a0
 #define AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET		0x0068
 #define AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET		0x0070
+#define AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET		0x0720
+
 #endif
-- 
cgit v1.2.3


From 6da233589f26ebd891d507a5a134ab43267006f2 Mon Sep 17 00:00:00 2001
From: Pali Rohár <pali.rohar@gmail.com>
Date: Thu, 26 Feb 2015 14:49:51 +0100
Subject: ARM: OMAP2+: Return correct error values from device and hwmod
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Without this patch function pm_runtime_get_sync() returns 0 even when
some omap subfunction fails. This patch properly propagate error codes
from omap functions back to caller.

This patch fix problem, when loading omap-aes driver in qemu cause
kernel oops.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
[paul@pwsan.com: fix a checkpatch warning]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/omap_device.c | 30 +++++++++++++++++-------------
 arch/arm/mach-omap2/omap_hwmod.c  | 10 ++++++----
 2 files changed, 23 insertions(+), 17 deletions(-)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 166b18f515a2..4a7303cf563e 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -224,13 +224,13 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
  */
 static int _omap_device_enable_hwmods(struct omap_device *od)
 {
+	int ret = 0;
 	int i;
 
 	for (i = 0; i < od->hwmods_cnt; i++)
-		omap_hwmod_enable(od->hwmods[i]);
+		ret |= omap_hwmod_enable(od->hwmods[i]);
 
-	/* XXX pass along return value here? */
-	return 0;
+	return ret;
 }
 
 /**
@@ -241,13 +241,13 @@ static int _omap_device_enable_hwmods(struct omap_device *od)
  */
 static int _omap_device_idle_hwmods(struct omap_device *od)
 {
+	int ret = 0;
 	int i;
 
 	for (i = 0; i < od->hwmods_cnt; i++)
-		omap_hwmod_idle(od->hwmods[i]);
+		ret |= omap_hwmod_idle(od->hwmods[i]);
 
-	/* XXX pass along return value here? */
-	return 0;
+	return ret;
 }
 
 /* Public functions for use by core code */
@@ -595,18 +595,20 @@ static int _od_runtime_suspend(struct device *dev)
 	int ret;
 
 	ret = pm_generic_runtime_suspend(dev);
+	if (ret)
+		return ret;
 
-	if (!ret)
-		omap_device_idle(pdev);
-
-	return ret;
+	return omap_device_idle(pdev);
 }
 
 static int _od_runtime_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
+	int ret;
 
-	omap_device_enable(pdev);
+	ret = omap_device_enable(pdev);
+	if (ret)
+		return ret;
 
 	return pm_generic_runtime_resume(dev);
 }
@@ -743,7 +745,8 @@ int omap_device_enable(struct platform_device *pdev)
 
 	ret = _omap_device_enable_hwmods(od);
 
-	od->_state = OMAP_DEVICE_STATE_ENABLED;
+	if (ret == 0)
+		od->_state = OMAP_DEVICE_STATE_ENABLED;
 
 	return ret;
 }
@@ -773,7 +776,8 @@ int omap_device_idle(struct platform_device *pdev)
 
 	ret = _omap_device_idle_hwmods(od);
 
-	od->_state = OMAP_DEVICE_STATE_IDLE;
+	if (ret == 0)
+		od->_state = OMAP_DEVICE_STATE_IDLE;
 
 	return ret;
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 752969ff9de0..d78c12e7cb5e 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -3318,16 +3318,17 @@ int omap_hwmod_enable(struct omap_hwmod *oh)
  */
 int omap_hwmod_idle(struct omap_hwmod *oh)
 {
+	int r;
 	unsigned long flags;
 
 	if (!oh)
 		return -EINVAL;
 
 	spin_lock_irqsave(&oh->_lock, flags);
-	_idle(oh);
+	r = _idle(oh);
 	spin_unlock_irqrestore(&oh->_lock, flags);
 
-	return 0;
+	return r;
 }
 
 /**
@@ -3340,16 +3341,17 @@ int omap_hwmod_idle(struct omap_hwmod *oh)
  */
 int omap_hwmod_shutdown(struct omap_hwmod *oh)
 {
+	int r;
 	unsigned long flags;
 
 	if (!oh)
 		return -EINVAL;
 
 	spin_lock_irqsave(&oh->_lock, flags);
-	_shutdown(oh);
+	r = _shutdown(oh);
 	spin_unlock_irqrestore(&oh->_lock, flags);
 
-	return 0;
+	return r;
 }
 
 /*
-- 
cgit v1.2.3


From a55a744582e0dc106537ba5e508c340c39cfe454 Mon Sep 17 00:00:00 2001
From: Pali Rohár <pali.rohar@gmail.com>
Date: Thu, 26 Feb 2015 14:49:52 +0100
Subject: ARM: OMAP3: Fix crypto support for HS devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Register crypto hwmod links only if they are not disabled in DT.
If DT information is missing, enable them only for GP devices.

Before this patch crypto hwmod links were always disabled for all HS
devices and it was not possible to use omap-aes and omap-sham linux
drivers.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
[paul@pwsan.com: move the complex IP-block presence heuristics into their
 own function to simplify the code; fix some checkpatch warnings]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 107 +++++++++++++++++++++++++----
 1 file changed, 94 insertions(+), 13 deletions(-)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 0ca4d3fb7df6..dc55f8dedf2c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -3736,29 +3736,54 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
 /* GP-only hwmod links */
 static struct omap_hwmod_ocp_if *omap34xx_gp_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_sec__timer12,
-	&omap3xxx_l4_core__sham,
-	&omap3xxx_l4_core__aes,
 	NULL
 };
 
 static struct omap_hwmod_ocp_if *omap36xx_gp_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_sec__timer12,
-	&omap3xxx_l4_core__sham,
-	&omap3xxx_l4_core__aes,
 	NULL
 };
 
 static struct omap_hwmod_ocp_if *am35xx_gp_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_sec__timer12,
-	/*
-	 * Apparently the SHA/MD5 and AES accelerator IP blocks are
-	 * only present on some AM35xx chips, and no one knows which
-	 * ones.  See
-	 * http://www.spinics.net/lists/arm-kernel/msg215466.html So
-	 * if you need these IP blocks on an AM35xx, try uncommenting
-	 * the following lines.
-	 */
+	NULL
+};
+
+/* crypto hwmod links */
+static struct omap_hwmod_ocp_if *omap34xx_sham_hwmod_ocp_ifs[] __initdata = {
+	&omap3xxx_l4_core__sham,
+	NULL
+};
+
+static struct omap_hwmod_ocp_if *omap34xx_aes_hwmod_ocp_ifs[] __initdata = {
+	&omap3xxx_l4_core__aes,
+	NULL
+};
+
+static struct omap_hwmod_ocp_if *omap36xx_sham_hwmod_ocp_ifs[] __initdata = {
+	&omap3xxx_l4_core__sham,
+	NULL
+};
+
+static struct omap_hwmod_ocp_if *omap36xx_aes_hwmod_ocp_ifs[] __initdata = {
+	&omap3xxx_l4_core__aes,
+	NULL
+};
+
+/*
+ * Apparently the SHA/MD5 and AES accelerator IP blocks are
+ * only present on some AM35xx chips, and no one knows which
+ * ones.  See
+ * http://www.spinics.net/lists/arm-kernel/msg215466.html So
+ * if you need these IP blocks on an AM35xx, try uncommenting
+ * the following lines.
+ */
+static struct omap_hwmod_ocp_if *am35xx_sham_hwmod_ocp_ifs[] __initdata = {
 	/* &omap3xxx_l4_core__sham, */
+	NULL
+};
+
+static struct omap_hwmod_ocp_if *am35xx_aes_hwmod_ocp_ifs[] __initdata = {
 	/* &omap3xxx_l4_core__aes, */
 	NULL
 };
@@ -3860,10 +3885,41 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_hwmod_ocp_ifs[] __initdata = {
 	NULL
 };
 
+/**
+ * omap3xxx_hwmod_is_hs_ip_block_usable - is a security IP block accessible?
+ * @bus: struct device_node * for the top-level OMAP DT data
+ * @dev_name: device name used in the DT file
+ *
+ * Determine whether a "secure" IP block @dev_name is usable by Linux.
+ * There doesn't appear to be a 100% reliable way to determine this,
+ * so we rely on heuristics.  If @bus is null, meaning there's no DT
+ * data, then we only assume the IP block is accessible if the OMAP is
+ * fused as a 'general-purpose' SoC.  If however DT data is present,
+ * test to see if the IP block is described in the DT data and set to
+ * 'status = "okay"'.  If so then we assume the ODM has configured the
+ * OMAP firewalls to allow access to the IP block.
+ *
+ * Return: 0 if device named @dev_name is not likely to be accessible,
+ * or 1 if it is likely to be accessible.
+ */
+static int __init omap3xxx_hwmod_is_hs_ip_block_usable(struct device_node *bus,
+						       const char *dev_name)
+{
+	if (!bus)
+		return (omap_type() == OMAP2_DEVICE_TYPE_GP) ? 1 : 0;
+
+	if (of_device_is_available(of_find_node_by_name(bus, dev_name)))
+		return 1;
+
+	return 0;
+}
+
 int __init omap3xxx_hwmod_init(void)
 {
 	int r;
-	struct omap_hwmod_ocp_if **h = NULL, **h_gp = NULL;
+	struct omap_hwmod_ocp_if **h = NULL, **h_gp = NULL, **h_sham = NULL;
+	struct omap_hwmod_ocp_if **h_aes = NULL;
+	struct device_node *bus = NULL;
 	unsigned int rev;
 
 	omap_hwmod_init();
@@ -3885,13 +3941,19 @@ int __init omap3xxx_hwmod_init(void)
 	    rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) {
 		h = omap34xx_hwmod_ocp_ifs;
 		h_gp = omap34xx_gp_hwmod_ocp_ifs;
+		h_sham = omap34xx_sham_hwmod_ocp_ifs;
+		h_aes = omap34xx_aes_hwmod_ocp_ifs;
 	} else if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) {
 		h = am35xx_hwmod_ocp_ifs;
 		h_gp = am35xx_gp_hwmod_ocp_ifs;
+		h_sham = am35xx_sham_hwmod_ocp_ifs;
+		h_aes = am35xx_aes_hwmod_ocp_ifs;
 	} else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 ||
 		   rev == OMAP3630_REV_ES1_2) {
 		h = omap36xx_hwmod_ocp_ifs;
 		h_gp = omap36xx_gp_hwmod_ocp_ifs;
+		h_sham = omap36xx_sham_hwmod_ocp_ifs;
+		h_aes = omap36xx_aes_hwmod_ocp_ifs;
 	} else {
 		WARN(1, "OMAP3 hwmod family init: unknown chip type\n");
 		return -EINVAL;
@@ -3908,6 +3970,25 @@ int __init omap3xxx_hwmod_init(void)
 			return r;
 	}
 
+	/*
+	 * Register crypto hwmod links only if they are not disabled in DT.
+	 * If DT information is missing, enable them only for GP devices.
+	 */
+
+	if (of_have_populated_dt())
+		bus = of_find_node_by_name(NULL, "ocp");
+
+	if (h_sham && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "sham")) {
+		r = omap_hwmod_register_links(h_sham);
+		if (r < 0)
+			return r;
+	}
+
+	if (h_aes && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "aes")) {
+		r = omap_hwmod_register_links(h_aes);
+		if (r < 0)
+			return r;
+	}
 
 	/*
 	 * Register hwmod links specific to certain ES levels of a
-- 
cgit v1.2.3


From 2d5a3c803deedfa60014be8c0d933591c53db419 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 23 Feb 2015 12:53:56 +0200
Subject: arm: dra7: add DESHDCP clock

Add a new Linux clock for DRA7 based SoCs to control DESHDCP clock.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi               |  5 +++++
 arch/arm/boot/dts/dra7xx-clocks.dtsi      | 10 ++++++++++
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c |  1 +
 drivers/clk/ti/clk-7xx.c                  |  1 +
 4 files changed, 17 insertions(+)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index f03a091cd076..387c76ca41f9 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -131,6 +131,11 @@
 							regulator-max-microvolt = <3000000>;
 						};
 					};
+
+					scm_conf_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
 				};
 
 				dra7_pmx_core: pinmux@1400 {
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 3b933f74d000..470f39c4e326 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -2136,3 +2136,13 @@
 		clocks = <&dpll_usb_ck>;
 	};
 };
+
+&scm_conf_clocks {
+	dss_deshdcp_clk: dss_deshdcp_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_iclk_div>;
+		ti,bit-shift = <0>;
+		reg = <0x558>;
+	};
+};
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 0e64c2fac0b5..817dbd87ce67 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -438,6 +438,7 @@ static struct omap_hwmod_opt_clk dss_opt_clks[] = {
 	{ .role = "video2_clk", .clk = "dss_video2_clk" },
 	{ .role = "video1_clk", .clk = "dss_video1_clk" },
 	{ .role = "hdmi_clk", .clk = "dss_hdmi_clk" },
+	{ .role = "hdcp_clk", .clk = "dss_deshdcp_clk" },
 };
 
 static struct omap_hwmod dra7xx_dss_hwmod = {
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
index 5d2217ae4478..2dd956b9affa 100644
--- a/drivers/clk/ti/clk-7xx.c
+++ b/drivers/clk/ti/clk-7xx.c
@@ -305,6 +305,7 @@ static struct ti_dt_clk dra7xx_clks[] = {
 	DT_CLK("4882c000.timer", "timer_sys_ck", "timer_sys_clk_div"),
 	DT_CLK("4882e000.timer", "timer_sys_ck", "timer_sys_clk_div"),
 	DT_CLK(NULL, "sys_clkin", "sys_clkin1"),
+	DT_CLK(NULL, "dss_deshdcp_clk", "dss_deshdcp_clk"),
 	{ .node_name = NULL },
 };
 
-- 
cgit v1.2.3


From 42121688f970e0f01670ad9fba09bf41e41abecc Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 15 Sep 2014 13:12:18 -0500
Subject: ARM: DRA7: hwmod: add DMM hwmod description

Add DMM hwmod entries for DRA7. This is identical to DMM on OMAP5.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 817dbd87ce67..f6b94854fafc 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -48,6 +48,27 @@
  * IP blocks
  */
 
+/*
+ * 'dmm' class
+ * instance(s): dmm
+ */
+static struct omap_hwmod_class dra7xx_dmm_hwmod_class = {
+	.name	= "dmm",
+};
+
+/* dmm */
+static struct omap_hwmod dra7xx_dmm_hwmod = {
+	.name		= "dmm",
+	.class		= &dra7xx_dmm_hwmod_class,
+	.clkdm_name	= "emif_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_EMIF_DMM_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_EMIF_DMM_CONTEXT_OFFSET,
+		},
+	},
+};
+
 /*
  * 'l3' class
  * instance(s): l3_instr, l3_main_1, l3_main_2
@@ -2322,6 +2343,14 @@ static struct omap_hwmod dra7xx_wd_timer2_hwmod = {
  * Interfaces
  */
 
+/* l3_main_1 -> dmm */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dmm = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_dmm_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_SDMA,
+};
+
 /* l3_main_2 -> l3_instr */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_2__l3_instr = {
 	.master		= &dra7xx_l3_main_2_hwmod,
@@ -3290,6 +3319,7 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__wd_timer2 = {
 };
 
 static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
+	&dra7xx_l3_main_1__dmm,
 	&dra7xx_l3_main_2__l3_instr,
 	&dra7xx_l4_cfg__l3_main_1,
 	&dra7xx_mpu__l3_main_1,
-- 
cgit v1.2.3


From a3818c6d5718c40e661846c0f6504a7f3f67918a Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 9 Oct 2014 16:45:56 +0300
Subject: ARM: DRA7: hwmod: set DSS submodule parent hwmods

Set DSS core hwmod as the parent for all the DSS submodules. This
ensures that the parent hwmods are enabled before any DSS submodules are
accessed.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index f6b94854fafc..9961f95f52ae 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -522,6 +522,7 @@ static struct omap_hwmod dra7xx_dss_dispc_hwmod = {
 		},
 	},
 	.dev_attr	= &dss_dispc_dev_attr,
+	.parent_hwmod	= &dra7xx_dss_hwmod,
 };
 
 /*
@@ -563,6 +564,7 @@ static struct omap_hwmod dra7xx_dss_hdmi_hwmod = {
 	},
 	.opt_clks	= dss_hdmi_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(dss_hdmi_opt_clks),
+	.parent_hwmod	= &dra7xx_dss_hwmod,
 };
 
 /*
-- 
cgit v1.2.3


From 5b5992ac64a5a609c995807d987459c7759c6fb1 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 11 Dec 2014 16:30:07 +0200
Subject: ARM: OMAP: display: change compat names to array

Simplify the DSS detection logic by creating a list of the omapdss
compat strings, instead of checking each separately with an 'if'.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/display.c | 29 ++++++++++++++---------------
 1 file changed, 14 insertions(+), 15 deletions(-)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index f492ae147c6a..9868d0bc7805 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -568,25 +568,24 @@ void __init omapdss_early_init_of(void)
 
 }
 
+static const char * const omapdss_compat_names[] __initconst = {
+	"ti,omap2-dss",
+	"ti,omap3-dss",
+	"ti,omap4-dss",
+	"ti,omap5-dss",
+};
+
 struct device_node * __init omapdss_find_dss_of_node(void)
 {
 	struct device_node *node;
+	int i;
 
-	node = of_find_compatible_node(NULL, NULL, "ti,omap2-dss");
-	if (node)
-		return node;
-
-	node = of_find_compatible_node(NULL, NULL, "ti,omap3-dss");
-	if (node)
-		return node;
-
-	node = of_find_compatible_node(NULL, NULL, "ti,omap4-dss");
-	if (node)
-		return node;
-
-	node = of_find_compatible_node(NULL, NULL, "ti,omap5-dss");
-	if (node)
-		return node;
+	for (i = 0; i < ARRAY_SIZE(omapdss_compat_names); ++i) {
+		node = of_find_compatible_node(NULL, NULL,
+			omapdss_compat_names[i]);
+		if (node)
+			return node;
+	}
 
 	return NULL;
 }
-- 
cgit v1.2.3


From 403ee909e44a6cf41060ce02899c07f5907d6af5 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 21 Apr 2014 16:08:47 +0530
Subject: ARM: OMAP2+: display: detect DRA7 DSS

Add platform code to detect DRA7 DSS.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/display.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch/arm/mach-omap2')

diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 9868d0bc7805..6ab13d18c636 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -287,6 +287,8 @@ static enum omapdss_version __init omap_display_get_version(void)
 		return OMAPDSS_VER_OMAP5;
 	else if (soc_is_am43xx())
 		return OMAPDSS_VER_AM43xx;
+	else if (soc_is_dra7xx())
+		return OMAPDSS_VER_DRA7xx;
 	else
 		return OMAPDSS_VER_UNKNOWN;
 }
@@ -573,6 +575,7 @@ static const char * const omapdss_compat_names[] __initconst = {
 	"ti,omap3-dss",
 	"ti,omap4-dss",
 	"ti,omap5-dss",
+	"ti,dra7-dss",
 };
 
 struct device_node * __init omapdss_find_dss_of_node(void)
-- 
cgit v1.2.3