From aa2bc1ade59003a379ffc485d6da2d92ea3370a6 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 9 Nov 2011 17:56:37 +0100 Subject: perf: Don't use -ENOSPC for out of PMU resources People (Linus) objected to using -ENOSPC to signal not having enough resources on the PMU to satisfy the request. Use -EINVAL. Requested-by: Linus Torvalds Cc: Stephane Eranian Cc: Will Deacon Cc: Deng-Cheng Zhu Cc: David Daney Cc: Ralf Baechle Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-xv8geaz2zpbjhlx0svmpp28n@git.kernel.org [ merged to newer kernel, fixed up MIPS impact ] Signed-off-by: Ingo Molnar --- arch/arm/kernel/perf_event.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 24e2347be6b1..ff17b17b668e 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -347,15 +347,15 @@ validate_group(struct perf_event *event) memset(&fake_pmu, 0, sizeof(fake_pmu)); if (!validate_event(&fake_pmu, leader)) - return -ENOSPC; + return -EINVAL; list_for_each_entry(sibling, &leader->sibling_list, group_entry) { if (!validate_event(&fake_pmu, sibling)) - return -ENOSPC; + return -EINVAL; } if (!validate_event(&fake_pmu, event)) - return -ENOSPC; + return -EINVAL; return 0; } -- cgit v1.2.3 From 1b6cec8a6910ca08d727898453baad22b0122920 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:15:57 +0900 Subject: ARM: mach-shmobile: Kota2 PINT fix Support PINT on sh73a0 and Kota2 using INTC PINT macros. With this patch applied the Kota2 ethernet is handled through one of the chained sh73a0 PINT interrupt controllers. sh73a0 PINT support is included in 3.2-rc but the Kota2 board code does not make use of this shared code base without this patch. Without this patch kota2 on-board ethernet is broken. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-kota2.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index bd9a78424d6b..5e084b9a8404 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -56,7 +56,7 @@ static struct resource smsc9220_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(33), /* PINTA2 @ PORT144 */ + .start = SH73A0_PINT0_IRQ(2), /* PINTA2 */ .flags = IORESOURCE_IRQ, }, }; @@ -317,18 +317,6 @@ static void __init kota2_map_io(void) shmobile_setup_console(); } -#define PINTER0A 0xe69000a0 -#define PINTCR0A 0xe69000b0 - -void __init kota2_init_irq(void) -{ - sh73a0_init_irq(); - - /* setup PINT: enable PINTA2 as active low */ - __raw_writel(1 << 29, PINTER0A); - __raw_writew(2 << 10, PINTCR0A); -} - static void __init kota2_init(void) { sh73a0_pinmux_init(); @@ -447,7 +435,7 @@ struct sys_timer kota2_timer = { MACHINE_START(KOTA2, "kota2") .map_io = kota2_map_io, - .init_irq = kota2_init_irq, + .init_irq = sh73a0_init_irq, .handle_irq = shmobile_handle_irq_gic, .init_machine = kota2_init, .timer = &kota2_timer, -- cgit v1.2.3 From dcb4ea869877b00fd1c761662bfd9359d15a8c2a Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:29:54 +0900 Subject: ARM: mach-shmobile: Kota2 GIC Sparse IRQ fix Fix IRQ support on the Kota2 board. The sh73a0 and the Kota2 board make use of the ARM GIC hardware block as main interrupt controller. The following commit changed the default behaviour for non-device tree platforms and broke Kota2 irq support: f37a53c ARM: gic: fix irq_alloc_descs handling for sparse irq Without this fix the following warning triggers at boot: NR_IRQS:1024 nr_irqs:1024 1024 ------------[ cut here ]------------ WARNING: at arch/arm/common/gic.c:607 gic_init+0x90/0x2e4() Cannot allocate irq_descs @ IRQ16, assuming pre-allocated [] (unwind_backtrace+0x0/0xe0) from [] (warn_slowpath_commo) [] (warn_slowpath_common+0x48/0x60) from [] (warn_slowpath_) [] (warn_slowpath_fmt+0x2c/0x3c) from [] (gic_init+0x90/0x2) [] (gic_init+0x90/0x2e4) from [] (sh73a0_init_irq+0x30/0x18) [] (sh73a0_init_irq+0x30/0x184) from [] (init_IRQ+0x14/0x1c) [] (init_IRQ+0x14/0x1c) from [] (start_kernel+0x15c/0x2b8) [] (start_kernel+0x15c/0x2b8) from [<4000803c>] (0x4000803c) ---[ end trace 1b75b31a2719ed1c ]--- With this fix applied interrupts work as expected. Signed-off-by: Magnus Damm Acked-by: Rob Herring Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-kota2.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 5e084b9a8404..53e5e45521aa 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -435,6 +435,7 @@ struct sys_timer kota2_timer = { MACHINE_START(KOTA2, "kota2") .map_io = kota2_map_io, + .nr_irqs = NR_IRQS_LEGACY, .init_irq = sh73a0_init_irq, .handle_irq = shmobile_handle_irq_gic, .init_machine = kota2_init, -- cgit v1.2.3 From 33661c9e2062865acde9d421c971f1c142cf99ca Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:44:58 +0900 Subject: ARM: mach-shmobile: Kota2 TPU LED platform data This patch updates the Kota2 board support code to use the recently merged TPU LED driver whenever possible. The sh73a0 SoC has 5 TPU hardware blocks each with 4 timer channels which in theory allows a total of 20 LEDs to be controlled by "leds-renesas-tpu" driver instances. The Kota2 board has 4 LEDs connected to GPIO pins that also come with TPU pin functions, so this patch ties up these 4 LEDS and leaves the remaining 3 LEDS for the GPIO based LED driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-kota2.c | 122 ++++++++++++++++++++++++++++++++-- arch/arm/mach-shmobile/clock-sh73a0.c | 16 +++++ 2 files changed, 134 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 53e5e45521aa..f44150b5ae46 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include @@ -157,10 +158,6 @@ static struct platform_device gpio_keys_device = { #define GPIO_LED(n, g) { .name = n, .gpio = g } static struct gpio_led gpio_leds[] = { - GPIO_LED("V2513", GPIO_PORT153), /* PORT153 [TPU1T02] -> V2513 */ - GPIO_LED("V2514", GPIO_PORT199), /* PORT199 [TPU4TO1] -> V2514 */ - GPIO_LED("V2515", GPIO_PORT197), /* PORT197 [TPU2TO1] -> V2515 */ - GPIO_LED("KEYLED", GPIO_PORT163), /* PORT163 [TPU3TO0] -> KEYLED */ GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */ GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */ GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */ @@ -179,6 +176,119 @@ static struct platform_device gpio_leds_device = { }, }; +/* TPU LED */ +static struct led_renesas_tpu_config led_renesas_tpu12_pdata = { + .name = "V2513", + .pin_gpio_fn = GPIO_FN_TPU1TO2, + .pin_gpio = GPIO_PORT153, + .channel_offset = 0x90, + .timer_bit = 2, + .max_brightness = 1000, +}; + +static struct resource tpu12_resources[] = { + [0] = { + .name = "TPU12", + .start = 0xe6610090, + .end = 0xe66100b5, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu12_device = { + .name = "leds-renesas-tpu", + .id = 12, + .dev = { + .platform_data = &led_renesas_tpu12_pdata, + }, + .num_resources = ARRAY_SIZE(tpu12_resources), + .resource = tpu12_resources, +}; + +static struct led_renesas_tpu_config led_renesas_tpu41_pdata = { + .name = "V2514", + .pin_gpio_fn = GPIO_FN_TPU4TO1, + .pin_gpio = GPIO_PORT199, + .channel_offset = 0x50, + .timer_bit = 1, + .max_brightness = 1000, +}; + +static struct resource tpu41_resources[] = { + [0] = { + .name = "TPU41", + .start = 0xe6640050, + .end = 0xe6640075, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu41_device = { + .name = "leds-renesas-tpu", + .id = 41, + .dev = { + .platform_data = &led_renesas_tpu41_pdata, + }, + .num_resources = ARRAY_SIZE(tpu41_resources), + .resource = tpu41_resources, +}; + +static struct led_renesas_tpu_config led_renesas_tpu21_pdata = { + .name = "V2515", + .pin_gpio_fn = GPIO_FN_TPU2TO1, + .pin_gpio = GPIO_PORT197, + .channel_offset = 0x50, + .timer_bit = 1, + .max_brightness = 1000, +}; + +static struct resource tpu21_resources[] = { + [0] = { + .name = "TPU21", + .start = 0xe6620050, + .end = 0xe6620075, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu21_device = { + .name = "leds-renesas-tpu", + .id = 21, + .dev = { + .platform_data = &led_renesas_tpu21_pdata, + }, + .num_resources = ARRAY_SIZE(tpu21_resources), + .resource = tpu21_resources, +}; + +static struct led_renesas_tpu_config led_renesas_tpu30_pdata = { + .name = "KEYLED", + .pin_gpio_fn = GPIO_FN_TPU3TO0, + .pin_gpio = GPIO_PORT163, + .channel_offset = 0x10, + .timer_bit = 0, + .max_brightness = 1000, +}; + +static struct resource tpu30_resources[] = { + [0] = { + .name = "TPU30", + .start = 0xe6630010, + .end = 0xe6630035, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu30_device = { + .name = "leds-renesas-tpu", + .id = 30, + .dev = { + .platform_data = &led_renesas_tpu30_pdata, + }, + .num_resources = ARRAY_SIZE(tpu30_resources), + .resource = tpu30_resources, +}; + /* MMCIF */ static struct resource mmcif_resources[] = { [0] = { @@ -291,6 +401,10 @@ static struct platform_device *kota2_devices[] __initdata = { &keysc_device, &gpio_keys_device, &gpio_leds_device, + &leds_tpu12_device, + &leds_tpu41_device, + &leds_tpu21_device, + &leds_tpu30_device, &mmcif_device, &sdhi0_device, &sdhi1_device, diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 61a846bb30f2..a56d6c63b71e 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -113,6 +113,12 @@ static struct clk main_clk = { .ops = &main_clk_ops, }; +/* Divide Main clock by two */ +static struct clk main_div2_clk = { + .ops = &div2_clk_ops, + .parent = &main_clk, +}; + /* PLL0, PLL1, PLL2, PLL3 */ static unsigned long pll_recalc(struct clk *clk) { @@ -181,6 +187,7 @@ static struct clk *main_clks[] = { &extal1_div2_clk, &extal2_div2_clk, &main_clk, + &main_div2_clk, &pll0_clk, &pll1_clk, &pll2_clk, @@ -268,6 +275,7 @@ enum { MSTP001, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, MSTP331, MSTP329, MSTP325, MSTP323, MSTP318, MSTP314, MSTP313, MSTP312, MSTP311, + MSTP303, MSTP302, MSTP301, MSTP300, MSTP411, MSTP410, MSTP403, MSTP_NR }; @@ -301,6 +309,10 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */ [MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */ + [MSTP303] = MSTP(&main_div2_clk, SMSTPCR3, 3, 0), /* TPU1 */ + [MSTP302] = MSTP(&main_div2_clk, SMSTPCR3, 2, 0), /* TPU2 */ + [MSTP301] = MSTP(&main_div2_clk, SMSTPCR3, 1, 0), /* TPU3 */ + [MSTP300] = MSTP(&main_div2_clk, SMSTPCR3, 0, 0), /* TPU4 */ [MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */ [MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */ [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ @@ -350,6 +362,10 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */ + CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */ + CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */ + CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */ + CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */ CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */ CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ -- cgit v1.2.3 From eded9143151a116753b1d8e893bc2d37f8687e0b Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:31:40 +0900 Subject: ARM: mach-shmobile: AG5EVM GIC Sparse IRQ fix Fix IRQ support on the AG5EVM board. The sh73a0 and the AG5EVM board make use of the ARM GIC hardware block as main interrupt controller. The following commit changed the default behaviour for non-device tree platforms and broke AG5EVM irq support: f37a53c ARM: gic: fix irq_alloc_descs handling for sparse irq Without this fix the following warning triggers at boot: NR_IRQS:1024 nr_irqs:1024 1024 ------------[ cut here ]------------ WARNING: at arch/arm/common/gic.c:607 gic_init+0x90/0x2e4() Cannot allocate irq_descs @ IRQ16, assuming pre-allocated [] (unwind_backtrace+0x0/0xe0) from [] (warn_slowpath_commo) [] (warn_slowpath_common+0x48/0x60) from [] (warn_slowpath_) [] (warn_slowpath_fmt+0x2c/0x3c) from [] (gic_init+0x90/0x2) [] (gic_init+0x90/0x2e4) from [] (sh73a0_init_irq+0x30/0x18) [] (sh73a0_init_irq+0x30/0x184) from [] (init_IRQ+0x14/0x1c) [] (init_IRQ+0x14/0x1c) from [] (start_kernel+0x15c/0x2b8) [] (start_kernel+0x15c/0x2b8) from [<4000803c>] (0x4000803c) ---[ end trace 1b75b31a2719ed1c ]--- With this fix applied interrupts work as expected. Signed-off-by: Magnus Damm Acked-by: Rob Herring Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ag5evm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index b862e9f81e3e..7119b87cbfa0 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -607,6 +607,7 @@ struct sys_timer ag5evm_timer = { MACHINE_START(AG5EVM, "ag5evm") .map_io = ag5evm_map_io, + .nr_irqs = NR_IRQS_LEGACY, .init_irq = sh73a0_init_irq, .handle_irq = shmobile_handle_irq_gic, .init_machine = ag5evm_init, -- cgit v1.2.3 From 9bcc0a5d0de137b3a154dc951c5ff70dce815879 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:23:17 +0900 Subject: ARM: mach-shmobile: SH73A0 external Ethernet fix Keep the ZB clock enabled on sh73a0 to allow the BSC to access external peripherals hooked up to CS signals. This is needed to unbreak Ethernet support on sh73a0 boards such as AG5EVM and Kota2 together with the following patch: 794d78f drivers: sh: late disabling of clocks V2 Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/clock-sh73a0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 61a846bb30f2..84fd33c9f4ee 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -243,7 +243,7 @@ static struct clk div6_clks[DIV6_NR] = { [DIV6_VCK1] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR1, 0), [DIV6_VCK2] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR2, 0), [DIV6_VCK3] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR3, 0), - [DIV6_ZB1] = SH_CLK_DIV6(&pll1_div2_clk, ZBCKCR, 0), + [DIV6_ZB1] = SH_CLK_DIV6(&pll1_div2_clk, ZBCKCR, CLK_ENABLE_ON_INIT), [DIV6_FLCTL] = SH_CLK_DIV6(&pll1_div2_clk, FLCKCR, 0), [DIV6_SDHI0] = SH_CLK_DIV6(&pll1_div2_clk, SD0CKCR, 0), [DIV6_SDHI1] = SH_CLK_DIV6(&pll1_div2_clk, SD1CKCR, 0), -- cgit v1.2.3 From a5f70b6717a229ad10aa79382a29a8ee6f1976c3 Mon Sep 17 00:00:00 2001 From: Christian Hitz Date: Mon, 24 Oct 2011 08:57:32 +0200 Subject: ARM: at91: fix NAND bus width decoding from system_rev Make it is safe to assign the return value of this function to u8/u16 variables. Signed-off-by: Christian Hitz Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/include/mach/system_rev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h index 8f4866045b41..ec164a4124c9 100644 --- a/arch/arm/mach-at91/include/mach/system_rev.h +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -19,7 +19,7 @@ #define BOARD_HAVE_NAND_16BIT (1 << 31) static inline int board_have_nand_16bit(void) { - return system_rev & BOARD_HAVE_NAND_16BIT; + return (system_rev & BOARD_HAVE_NAND_16BIT) ? 1 : 0; } #endif /* __ARCH_SYSTEM_REV_H__ */ -- cgit v1.2.3 From 1808958d27b1250295f01dff4997d8a8814adaab Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Mon, 28 Nov 2011 12:53:08 +0100 Subject: ARM: at91: fix clock conid for atmel_tcb.1 on 9260/9g20 The conid is supposed to be t0/t1/t2_clk. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre Cc: stable --- arch/arm/mach-at91/at91sam9260.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index b84a9f642f59..0d20677fbef0 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -195,9 +195,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), - CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk), - CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk), - CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), -- cgit v1.2.3 From 0e934e22f3fabb98c41737e2e30bd9db2668e935 Mon Sep 17 00:00:00 2001 From: Anders Darander Date: Wed, 30 Nov 2011 08:47:44 +0100 Subject: ARM: at91: Fix USB AT91 gadget registration Since 193ab2a6070039e7ee2b9b9bebea754a7c52fd1b, various AT91 boards don't register at91_udc anymore due to depending on a now non-existing symbol. Fix the symbol name. Signed-off-by: Anders Darander Signed-off-by: Nicolas Ferre Cc: stable --- arch/arm/mach-at91/at91rm9200_devices.c | 2 +- arch/arm/mach-at91/at91sam9260_devices.c | 2 +- arch/arm/mach-at91/at91sam9261_devices.c | 2 +- arch/arm/mach-at91/at91sam9263_devices.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 66591fa53e05..ad930688358c 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 25e3464fb07f..629fa9774972 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index ae78f4d03b73..a178b58b0b9c 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index ad017eb1f8df..d5fbac9ff4fa 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { -- cgit v1.2.3 From 2a3267a489f1dc4284b64a4b88c62011946dc7ff Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 1 Dec 2011 14:35:29 +0800 Subject: arm/imx: fix return type of callback passed to of_irq_init() The of_irq_init() expects the callback passed by .data of of_device_id return 'int' instead of 'void'. This patch fixes it to have irq_init_cb() return the correct value, and in turn have the secondary interrupt controller (gpio in this case) initialized properly and also eliminate the error message 'of_irq_init: children remain, but no parents' which was overlooked before. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/mach-imx6q.c | 4 +++- arch/arm/mach-mx5/imx51-dt.c | 7 +++++-- arch/arm/mach-mx5/imx53-dt.c | 7 +++++-- 3 files changed, 13 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 8bf5fa349484..eb7531bdfed7 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -36,7 +36,7 @@ static void __init imx6q_map_io(void) imx_scu_map_io(); } -static void __init imx6q_gpio_add_irq_domain(struct device_node *np, +static int __init imx6q_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - @@ -44,6 +44,8 @@ static void __init imx6q_gpio_add_irq_domain(struct device_node *np, irq_domain_add_simple(np, gpio_irq_base); gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx6q_irq_match[] __initconst = { diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c index ccc61585659b..3451a463a79a 100644 --- a/arch/arm/mach-mx5/imx51-dt.c +++ b/arch/arm/mach-mx5/imx51-dt.c @@ -44,13 +44,14 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static void __init imx51_tzic_add_irq_domain(struct device_node *np, +static int __init imx51_tzic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { irq_domain_add_simple(np, 0); + return 0; } -static void __init imx51_gpio_add_irq_domain(struct device_node *np, +static int __init imx51_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - @@ -58,6 +59,8 @@ static void __init imx51_gpio_add_irq_domain(struct device_node *np, irq_domain_add_simple(np, gpio_irq_base); gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx51_irq_match[] __initconst = { diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c index ccaa0b81b768..022bc0364b5f 100644 --- a/arch/arm/mach-mx5/imx53-dt.c +++ b/arch/arm/mach-mx5/imx53-dt.c @@ -48,13 +48,14 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static void __init imx53_tzic_add_irq_domain(struct device_node *np, +static int __init imx53_tzic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { irq_domain_add_simple(np, 0); + return 0; } -static void __init imx53_gpio_add_irq_domain(struct device_node *np, +static int __init imx53_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - @@ -62,6 +63,8 @@ static void __init imx53_gpio_add_irq_domain(struct device_node *np, irq_domain_add_simple(np, gpio_irq_base); gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx53_irq_match[] __initconst = { -- cgit v1.2.3 From 04aafd713bae8a75933c7821dc012b0ec9046bca Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 1 Dec 2011 14:49:29 +0800 Subject: arm/imx: fix irq_base for gpio When gpio core dynamically allocate gpio number for a port, it starts from the end of the total range, 0 ~ ARCH_NR_GPIOS. That said, the earlier a port gets probed, the bigger gpio number it gets assigned. To match this, the irq_base for gpio should be assigned from 'MXC_GPIO_IRQ_START + ARCH_NR_GPIOS' decreasingly. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/mach-imx6q.c | 5 ++--- arch/arm/mach-mx5/imx51-dt.c | 5 ++--- arch/arm/mach-mx5/imx53-dt.c | 5 ++--- 3 files changed, 6 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index eb7531bdfed7..22aa54aa9b2a 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -39,11 +39,10 @@ static void __init imx6q_map_io(void) static int __init imx6q_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 7; /* imx6q gets 7 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; return 0; } diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c index 3451a463a79a..596edd967dbf 100644 --- a/arch/arm/mach-mx5/imx51-dt.c +++ b/arch/arm/mach-mx5/imx51-dt.c @@ -54,11 +54,10 @@ static int __init imx51_tzic_add_irq_domain(struct device_node *np, static int __init imx51_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 4; /* imx51 gets 4 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; return 0; } diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c index 022bc0364b5f..85bfd5ff21b0 100644 --- a/arch/arm/mach-mx5/imx53-dt.c +++ b/arch/arm/mach-mx5/imx53-dt.c @@ -58,11 +58,10 @@ static int __init imx53_tzic_add_irq_domain(struct device_node *np, static int __init imx53_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 7; /* imx53 gets 7 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; return 0; } -- cgit v1.2.3 From 650f7a72b8cc235ffe4a0e3eff37954349026721 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 1 Dec 2011 17:47:06 -0800 Subject: ARM: OMAP1: Fix reprogramming of DPLL1 for systems that boot at rates below 60MHz Commit e9b7086b80c4d9e354f4edc9e280ae85a60df408 (ARM: OMAP: Fix reprogramming of dpll1 rate) fixed a regression for systems that did not rely on bootloader set rates. However, it also introduced a new problem where the rates selected in .config would not take affect as omap1_select_table_rate currently refuses to reprogram DPLL1 if it's already initialized. This was not a problem earlier, as the reprogramming was done earlier with ck_dpll1_p->rate uninitialized. Fix this by forcing the reprogramming on systems booting at rates below 60MHz. Note that the long term fix is to make the rates SoC specific later on. Thanks for Janusz Krzysztofik for figuring this one out. Reported-by: Janusz Krzysztofik Acked-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock_data.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 1297bb58869c..3f305610efa0 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -930,6 +930,9 @@ void __init omap1_clk_late_init(void) if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE) return; + /* System booting at unusable rate, force reprogramming of DPLL1 */ + ck_dpll1_p->rate = 0; + /* Find the highest supported frequency and enable it */ if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { pr_err("System frequencies not set, using default. Check your config.\n"); -- cgit v1.2.3 From b29e23547ecb2a609777288cd81fc83b01f9f43f Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 1 Dec 2011 21:30:39 +0100 Subject: ARM: OMAP1: Remove unsafe clock values from omap1_defconfig DPLL1 reprogramming to a different rate is actually blocked inside omap1_select_table_rate(), resulting in the defalut rate of 60 MHz always used instead of the one selected in .config. OTOH, in omap1_defconfig we currently rely on Kconfig options for the supported MHz rates in case of boards which boot with dpll1 not set correctly by their boot loaders. This means that before we allow for reprogramming of dpll1 rate, we should remove all unsafe clock selections from omap1_defconfig, otherwise it will stop booting on boards with imperfect boot loaders, as it would always try to change to 216MHz. Keep only one safe clock rate per each supported xtal frequency, i.e. 60MHZ dpll1 for 12MHz xtal and 182MHz dpll1 for 13MHz xtal. BTW, this change goes into the direction of removing all OMAP1 clock rate options, planned for next merge window. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/configs/omap1_defconfig | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index a7e777581378..945a34f2a34d 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -48,12 +48,7 @@ CONFIG_MACH_SX1=y CONFIG_MACH_NOKIA770=y CONFIG_MACH_AMS_DELTA=y CONFIG_MACH_OMAP_GENERIC=y -CONFIG_OMAP_ARM_216MHZ=y -CONFIG_OMAP_ARM_195MHZ=y -CONFIG_OMAP_ARM_192MHZ=y CONFIG_OMAP_ARM_182MHZ=y -CONFIG_OMAP_ARM_168MHZ=y -# CONFIG_OMAP_ARM_60MHZ is not set # CONFIG_ARM_THUMB is not set CONFIG_PCCARD=y CONFIG_OMAP_CF=y -- cgit v1.2.3 From c2cb211116192690605eaa70d39deb04241003e2 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 1 Dec 2011 21:13:01 +0100 Subject: ARM: OMAP1: Fix ckctl value used for dpll1 defualt rate Use the exact value found in omap1_rate_table, otherwise I have been experiencing issues with correct timekeeping on my Amstrad Delta. Signed-off-by: Janusz Krzysztofik [tony@atomide.com: removed comment referencing a development branch] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock_data.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 3f305610efa0..86b2dec11788 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -937,7 +937,7 @@ void __init omap1_clk_late_init(void) if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { pr_err("System frequencies not set, using default. Check your config.\n"); omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); + omap_writew(cpu_is_omap7xx() ? 0x2005 : 0x0005, ARM_CKCTL); ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE; } propagate_rate(&ck_dpll1); -- cgit v1.2.3 From 1bdfd27a0bd65ccdd7294c1080bdb59f6a5a6e72 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 17 Nov 2011 22:18:14 +0800 Subject: ARM: CSR: fix build error due to new mdesc->dma_zone_size commit 98b0124f0e2b88 "ARM: mach-prima2: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size" causes building error: arch/arm/mach-prima2/prima2.c:39:19: error: 'SZ_256M' undeclared here (not in a function) Signed-off-by: Barry Song --- arch/arm/mach-prima2/prima2.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c index ef555c041962..a12b689a8702 100644 --- a/arch/arm/mach-prima2/prima2.c +++ b/arch/arm/mach-prima2/prima2.c @@ -8,6 +8,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3 From b2dcb8723eb61d00c40d526702d08f6d805f5f01 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 17 Nov 2011 22:27:22 +0800 Subject: ARM: CSR: PM: fix build error due to undeclared 'THIS_MODULE' In the new kernel, we will get the following compile error: arch/arm/mach-prima2/pm.c:141: error: 'THIS_MODULE' undeclared here (not in a function) so include module.h head file explicitly Signed-off-by: Barry Song --- arch/arm/mach-prima2/pm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c index cb53160f6c5d..26ebb57719df 100644 --- a/arch/arm/mach-prima2/pm.c +++ b/arch/arm/mach-prima2/pm.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From ade145cc4885fbdf47b3abd9cd6baf23b8367fef Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:17:36 +0900 Subject: ARM: S3C64XX: Remove extern from definition of framebuffer setup call The extern is only useful on prototypes. Signed-off-by: Mark Brown Cc: stable@kernel.org Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/setup-fb-24bpp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c index 83d2afb79e9f..2cf80026c58d 100644 --- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c +++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c @@ -20,7 +20,7 @@ #include #include -extern void s3c64xx_fb_gpio_setup_24bpp(void) +void s3c64xx_fb_gpio_setup_24bpp(void) { s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2)); s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2)); -- cgit v1.2.3 From f4a65ad6eb9b56180724de52ddd6dd6712121be1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:17:54 +0900 Subject: ARM: S3C64XX: Add linux/export.h to dev-spi.c This is required for the EXPORT_SYMBOL()s the code uses, previously the header was being included implicitly by another header. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/dev-spi.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c index 5e6b42089eb4..3341fd118723 100644 --- a/arch/arm/mach-s3c64xx/dev-spi.c +++ b/arch/arm/mach-s3c64xx/dev-spi.c @@ -10,6 +10,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3 From 71b33a4f7c864bf5fc893b5ca144770ad05f1d4a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:18:02 +0900 Subject: ARM: S3C64XX: Staticise s3c6400_sysclass The symbol is not exported and doesn't need to be. Signed-off-by: Mark Brown Cc: stable@kernel.org Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/s3c6400.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 7a3bc32df425..51c00f2453c6 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -70,7 +70,7 @@ void __init s3c6400_init_irq(void) s3c64xx_init_irq(~0 & ~(0xf << 5), ~0); } -struct sysdev_class s3c6400_sysclass = { +static struct sysdev_class s3c6400_sysclass = { .name = "s3c6400-core", }; -- cgit v1.2.3 From 5d348401ed03450395ce674594c1c08c7d85bd8d Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Sat, 12 Nov 2011 00:09:05 +0800 Subject: ARM: mxs/tx28: add __initconst for fec pdata MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Dong Aisheng Acked-by: Lothar Waßmann Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/module-tx28.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c index 0fcff47009cf..9a7b08b2a925 100644 --- a/arch/arm/mach-mxs/module-tx28.c +++ b/arch/arm/mach-mxs/module-tx28.c @@ -66,11 +66,11 @@ static const iomux_cfg_t tx28_fec1_pads[] __initconst = { MX28_PAD_ENET0_CRS__ENET1_RX_EN, }; -static struct fec_platform_data tx28_fec0_data = { +static const struct fec_platform_data tx28_fec0_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; -static struct fec_platform_data tx28_fec1_data = { +static const struct fec_platform_data tx28_fec1_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; -- cgit v1.2.3 From 8d2d2d1d7e96f12d9fe140169fb39ef9fd27b7c1 Mon Sep 17 00:00:00 2001 From: Lauri Hintsala Date: Mon, 21 Nov 2011 10:55:55 +0200 Subject: ARM: mxs: fix machines' initializers order Initializers of m28evk and stmp378x_devb fixed to be in order they are called. reference: http://article.gmane.org/gmane.linux.ports.arm.omap/50721 Cc: Shawn Guo Signed-off-by: Lauri Hintsala Acked-by: Russell King Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/mach-m28evk.c | 2 +- arch/arm/mach-mxs/mach-stmp378x_devb.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c index 3b1681e4f49a..6b00577b7025 100644 --- a/arch/arm/mach-mxs/mach-m28evk.c +++ b/arch/arm/mach-mxs/mach-m28evk.c @@ -361,6 +361,6 @@ static struct sys_timer m28evk_timer = { MACHINE_START(M28EVK, "DENX M28 EVK") .map_io = mx28_map_io, .init_irq = mx28_init_irq, - .init_machine = m28evk_init, .timer = &m28evk_timer, + .init_machine = m28evk_init, MACHINE_END diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c index 177e53123a02..6834dea38c04 100644 --- a/arch/arm/mach-mxs/mach-stmp378x_devb.c +++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c @@ -115,6 +115,6 @@ static struct sys_timer stmp378x_dvb_timer = { MACHINE_START(STMP378X, "STMP378X") .map_io = mx23_map_io, .init_irq = mx23_init_irq, - .init_machine = stmp378x_dvb_init, .timer = &stmp378x_dvb_timer, + .init_machine = stmp378x_dvb_init, MACHINE_END -- cgit v1.2.3 From 11357be9246c7d1acf9b37ad54a18b29bbb734be Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 26 Nov 2011 11:39:14 +0100 Subject: arm: mx23: recognise stmp378x as mx23 Adding the machine_is_* line was forgotten when converting mach-stmp378x to mach-mxs. Signed-off-by: Wolfram Sang Signed-off-by: Shawn Guo Cc: stable@kernel.org --- arch/arm/mach-mxs/include/mach/mxs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h index 0d2d2b470998..bde5f6634747 100644 --- a/arch/arm/mach-mxs/include/mach/mxs.h +++ b/arch/arm/mach-mxs/include/mach/mxs.h @@ -30,6 +30,7 @@ */ #define cpu_is_mx23() ( \ machine_is_mx23evk() || \ + machine_is_stmp378x() || \ 0) #define cpu_is_mx28() ( \ machine_is_mx28evk() || \ -- cgit v1.2.3 From 7d8b894ca135a896f32934f7d096714d5bc687e6 Mon Sep 17 00:00:00 2001 From: Peter Rusko Date: Wed, 30 Nov 2011 16:43:27 +0100 Subject: ARM: mx28: LRADC macro rename It's a correction of two macro names, renaming them from IRADC to LRADC. Signed-off-by: Peter Rusko Acked-by: Wolfram Sang Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/include/mach/mx28.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h index 75d86118b76a..30c7990f3c01 100644 --- a/arch/arm/mach-mxs/include/mach/mx28.h +++ b/arch/arm/mach-mxs/include/mach/mx28.h @@ -104,8 +104,8 @@ #define MX28_INT_CAN1 9 #define MX28_INT_LRADC_TOUCH 10 #define MX28_INT_HSADC 13 -#define MX28_INT_IRADC_THRESH0 14 -#define MX28_INT_IRADC_THRESH1 15 +#define MX28_INT_LRADC_THRESH0 14 +#define MX28_INT_LRADC_THRESH1 15 #define MX28_INT_LRADC_CH0 16 #define MX28_INT_LRADC_CH1 17 #define MX28_INT_LRADC_CH2 18 -- cgit v1.2.3 From 8f9a0981aca6bd454ef2a4bdac510af0f6e55bd4 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Tue, 15 Nov 2011 01:42:06 +0530 Subject: ARM: davinci: psc: fix incorrect mask There are 5 LSB bits defined in PDSTAT and the code currently uses a mask of 1 bit to check the status. Use a proper mask per the hardware specification. While at it, use a #define for the mask to improve readability. Reviewed-by: Sergei Shtylyov Signed-off-by: Murali Karicheri Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/include/mach/psc.h | 1 + arch/arm/mach-davinci/psc.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index fa59c097223d..8bf279a88b4b 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -244,6 +244,7 @@ #define PSC_STATE_ENABLE 3 #define MDSTAT_STATE_MASK 0x3f +#define PDSTAT_STATE_MASK 0x1f #define MDCTL_FORCE BIT(31) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 1fb6bdff38c1..a0e17707c981 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -80,7 +80,7 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, __raw_writel(mdctl, psc_base + MDCTL + 4 * id); pdstat = __raw_readl(psc_base + PDSTAT); - if ((pdstat & 0x00000001) == 0) { + if ((pdstat & PDSTAT_STATE_MASK) == 0) { pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x1; __raw_writel(pdctl1, psc_base + PDCTL1); -- cgit v1.2.3 From 78b838252fa986f66c7ec8047726ea500a08d98f Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Tue, 15 Nov 2011 01:42:07 +0530 Subject: ARM: davinci: psc: fix incorrect offsets Seperate PDSTAT and PDCTL registers are defined for domain 0 and domain 1 where as the code always reads the domain 0 PDSTAT register and domain 1 PDCTL register. Fix this issue. While at it, introduce usage of macros for register masks to improve readability. Reviewed-by: Sergei Shtylyov Signed-off-by: Murali Karicheri Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/include/mach/psc.h | 4 +++- arch/arm/mach-davinci/psc.c | 16 ++++++++-------- 2 files changed, 11 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 8bf279a88b4b..8bc3fc256171 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -233,7 +233,7 @@ #define PTCMD 0x120 #define PTSTAT 0x128 #define PDSTAT 0x200 -#define PDCTL1 0x304 +#define PDCTL 0x300 #define MDSTAT 0x800 #define MDCTL 0xA00 @@ -246,6 +246,8 @@ #define MDSTAT_STATE_MASK 0x3f #define PDSTAT_STATE_MASK 0x1f #define MDCTL_FORCE BIT(31) +#define PDCTL_NEXT BIT(1) +#define PDCTL_EPCGOOD BIT(8) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index a0e17707c981..d7e210f4b55c 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -52,7 +52,7 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) void davinci_psc_config(unsigned int domain, unsigned int ctlr, unsigned int id, bool enable, u32 flags) { - u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; + u32 epcpr, ptcmd, ptstat, pdstat, pdctl, mdstat, mdctl; void __iomem *psc_base; struct davinci_soc_info *soc_info = &davinci_soc_info; u32 next_state = PSC_STATE_ENABLE; @@ -79,11 +79,11 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, mdctl |= MDCTL_FORCE; __raw_writel(mdctl, psc_base + MDCTL + 4 * id); - pdstat = __raw_readl(psc_base + PDSTAT); + pdstat = __raw_readl(psc_base + PDSTAT + 4 * domain); if ((pdstat & PDSTAT_STATE_MASK) == 0) { - pdctl1 = __raw_readl(psc_base + PDCTL1); - pdctl1 |= 0x1; - __raw_writel(pdctl1, psc_base + PDCTL1); + pdctl = __raw_readl(psc_base + PDCTL + 4 * domain); + pdctl |= PDCTL_NEXT; + __raw_writel(pdctl, psc_base + PDCTL + 4 * domain); ptcmd = 1 << domain; __raw_writel(ptcmd, psc_base + PTCMD); @@ -92,9 +92,9 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, epcpr = __raw_readl(psc_base + EPCPR); } while ((((epcpr >> domain) & 1) == 0)); - pdctl1 = __raw_readl(psc_base + PDCTL1); - pdctl1 |= 0x100; - __raw_writel(pdctl1, psc_base + PDCTL1); + pdctl = __raw_readl(psc_base + PDCTL + 4 * domain); + pdctl |= PDCTL_EPCGOOD; + __raw_writel(pdctl, psc_base + PDCTL + 4 * domain); } else { ptcmd = 1 << domain; __raw_writel(ptcmd, psc_base + PTCMD); -- cgit v1.2.3 From 9ab409e402cbfde11e2516be43921954db480f4d Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Tue, 15 Nov 2011 01:42:08 +0530 Subject: ARM: davinci: dm646x does not have a DSP domain Fix the incorrect classification of DSP clock into a seperate DSP domain on DM646x. Per the reference guide (http://www.ti.com/lit/ug/spruep9e/spruep9e.pdf) there is only one "AlwaysON" power domain on DM6467. Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/dm646x.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 0b68ed534f8e..af27c130595f 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -161,7 +161,6 @@ static struct clk dsp_clk = { .name = "dsp", .parent = &pll1_sysclk1, .lpsc = DM646X_LPSC_C64X_CPU, - .flags = PSC_DSP, .usecount = 1, /* REVISIT how to disable? */ }; -- cgit v1.2.3 From 83713fc9373be2e943f82e9d36213708c6b0050e Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 14 Nov 2011 19:20:49 +0100 Subject: ARM: davinci: dm646x evm: wrong register used in setup_vpif_input_channel_mode The function setup_vpif_input_channel_mode() used the VSCLKDIS register instead of VIDCLKCTL. This meant that when in HD mode videoport channel 0 used a different clock from channel 1. Clearly a copy-and-paste error. Signed-off-by: Hans Verkuil Acked-by: Manjunath Hadli Signed-off-by: Sekhar Nori Cc: stable@kernel.org --- arch/arm/mach-davinci/board-dm646x-evm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index e574d7f837a8..635bf7740157 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -564,7 +564,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) int val; u32 value; - if (!vpif_vsclkdis_reg || !cpld_client) + if (!vpif_vidclkctl_reg || !cpld_client) return -ENXIO; val = i2c_smbus_read_byte(cpld_client); @@ -572,7 +572,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) return val; spin_lock_irqsave(&vpif_reg_lock, flags); - value = __raw_readl(vpif_vsclkdis_reg); + value = __raw_readl(vpif_vidclkctl_reg); if (mux_mode) { val &= VPIF_INPUT_TWO_CHANNEL; value |= VIDCH1CLK; @@ -580,7 +580,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) val |= VPIF_INPUT_ONE_CHANNEL; value &= ~VIDCH1CLK; } - __raw_writel(value, vpif_vsclkdis_reg); + __raw_writel(value, vpif_vidclkctl_reg); spin_unlock_irqrestore(&vpif_reg_lock, flags); err = i2c_smbus_write_byte(cpld_client, val); -- cgit v1.2.3 From f1b21c525693b0159aed83b5871f2d0f077f208e Mon Sep 17 00:00:00 2001 From: "Manjunathappa, Prakash" Date: Thu, 10 Nov 2011 11:43:21 +0530 Subject: ARM: davinci: da850 evm: change audio edma event queue to EVENTQ_0 On OMAP-L138 platform, EDMA event queue 0 should be used for audio transfers so that they are not starved by video data moving on event queue 1. Commit 48519f0ae03bc7e86b3dc93e56f1334d53803770 (ASoC: davinci: let platform data define edma queue numbers) had a side-effect of changing this behavior by making the driver actually honor the platform data passed. Fix this now by passing event queue 0 as the queue to be used for audio transfers. Signed-off-by: Manjunathappa, Prakash Signed-off-by: Sekhar Nori Cc: # v2.6.36.x and above --- arch/arm/mach-davinci/board-da850-evm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 1d7d24995226..6659a90dbcad 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -753,7 +753,7 @@ static struct snd_platform_data da850_evm_snd_data = { .num_serializer = ARRAY_SIZE(da850_iis_serializer_direction), .tdm_slots = 2, .serial_dir = da850_iis_serializer_direction, - .asp_chan_q = EVENTQ_1, + .asp_chan_q = EVENTQ_0, .version = MCASP_VERSION_2, .txnumevt = 1, .rxnumevt = 1, -- cgit v1.2.3 From 45fc4cce939adc883fba5e02f1f3e0e9ff020c30 Mon Sep 17 00:00:00 2001 From: "Shankarmurthy,Akshay" Date: Wed, 9 Nov 2011 17:55:20 +0530 Subject: ARM: davinci: dm365 evm: align nand partition table to u-boot Current partition information maintained in kernel does not match with u-boot, this leads to corruption of u-boot env when we update uImage from kernel. Patch fixes it to match with u-boot partition information. Signed-off-by: Shankarmurthy,Akshay Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-dm365-evm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 1918ae711428..46e1f4173b97 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -107,7 +107,7 @@ static struct mtd_partition davinci_nand_partitions[] = { /* UBL (a few copies) plus U-Boot */ .name = "bootloader", .offset = 0, - .size = 28 * NAND_BLOCK_SIZE, + .size = 30 * NAND_BLOCK_SIZE, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { /* U-Boot environment */ -- cgit v1.2.3 From 6560ee07dc946e94f7cc2cd8e3b5a5f5ee7340c1 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 1 Dec 2011 21:13:02 +0100 Subject: ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogram Otherwise timing is inaccurate, resulting in devices which depend on it, like omap-keypad, broken. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik [tony@atomide.com: removed comment referencing a development branch] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock_data.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 86b2dec11788..9ff90a744a21 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -16,6 +16,8 @@ #include #include +#include +#include #include #include /* for machine_is_* */ @@ -927,7 +929,9 @@ int __init omap1_clk_init(void) void __init omap1_clk_late_init(void) { - if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE) + unsigned long rate = ck_dpll1.rate; + + if (rate >= OMAP1_DPLL1_SANE_VALUE) return; /* System booting at unusable rate, force reprogramming of DPLL1 */ @@ -942,4 +946,5 @@ void __init omap1_clk_late_init(void) } propagate_rate(&ck_dpll1); omap1_show_rates(); + loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate); } -- cgit v1.2.3 From 96f176a310e447966e45112fe4511b9d9fa0caf4 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 6 Dec 2011 11:17:34 +0100 Subject: iommu/msm: Fix compile error in mach-msm/devices-iommu.c Fix compile error due to missing include. Signed-off-by: Joerg Roedel --- arch/arm/mach-msm/devices-iommu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-msm/devices-iommu.c b/arch/arm/mach-msm/devices-iommu.c index 24030d0da6e3..0fb7a17df398 100644 --- a/arch/arm/mach-msm/devices-iommu.c +++ b/arch/arm/mach-msm/devices-iommu.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From 974c07249b06d948154be3275bf4f6e55b585300 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 2 Dec 2011 23:09:42 +0100 Subject: ARM: 7186/1: fix Kconfig issue with PHYS_OFFSET and !MMU MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 1b9f95f8ade9 (ARM: prepare for removal of a bunch of files) introduced CONFIG_PHYS_OFFSET but the Kconfig hex prompt did not provide a default value. This has the undesired side effect of breaking a reportedly used trick for updating defconfigs on the fly for routine buildtesting across all arch and all platforms, i.e. cp /path/to/somedefconfig .config ; yes "" | make oldconfig because the config system will endlessly loop until a valid address is provided. However we can't just pick a random default value since it is likely to be wrong for the majority of the boards as the right answer for this option is quite varied. So the fact that the config system insists on having a proper value be entered is actually a good thing. It turns out that only at91x40_defconfig has this problem because it has CONFIG_MMU=n. However, in the !MMU case, there is already a CONFIG_DRAM_BASE value that can be used here. So let's use that as a default in that case and suppress the redundant CONFIG_PHYS_OFFSET prompt. Eventually the DRAM_BASE config option could simply be replaced by PHYS_OFFSET directly, but that's a larger change better suited for later. Reported-by: Paul Gortmaker Signed-off-by: Nicolas Pitre Acked-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e084b7e981e8..776d76b8cb69 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -220,8 +220,9 @@ config NEED_MACH_MEMORY_H be avoided when possible. config PHYS_OFFSET - hex "Physical address of main memory" + hex "Physical address of main memory" if MMU depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H + default DRAM_BASE if !MMU help Please provide the physical address corresponding to the location of main memory in your system. -- cgit v1.2.3 From de66a979012dbc66b1ec0125795a3f79ee667b8a Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Mon, 5 Dec 2011 09:39:59 +0100 Subject: ARM: 7187/1: fix unwinding for XIP kernels MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The linker places the unwind tables in readonly sections. So when using an XIP kernel these are located in ROM and cannot be modified. For that reason the current approach to convert the relative offsets in the unwind index to absolute addresses early in the boot process doesn't work with XIP. The offsets in the unwind index section are signed 31 bit numbers and the structs are sorted by this offset. So it first has offsets between 0x40000000 and 0x7fffffff (i.e. the negative offsets) and then offsets between 0x00000000 and 0x3fffffff. When seperating these two blocks the numbers are sorted even when interpreting the offsets as unsigned longs. So determine the first non-negative entry once and track that using the new origin pointer. The actual bisection can then use a plain unsigned long comparison. The only thing that makes the new bisection more complicated is that the offsets are relative to their position in the index section, so the key to search needs to be adapted accordingly in each step. Moreover several consts are added to catch future writes and rename the member "addr" of struct unwind_idx to "addr_offset" to better match the new semantic. (This has the additional benefit of breaking eventual users at compile time to make them aware of the change.) In my tests the new algorithm was a tad faster than the original and has the additional upside of not needing the initial conversion and so saves some boot time and it's possible to unwind even earlier. Acked-by: Catalin Marinas Acked-by: Nicolas Pitre Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/include/asm/unwind.h | 16 ++---- arch/arm/kernel/setup.c | 2 - arch/arm/kernel/unwind.c | 129 +++++++++++++++++++++++++++--------------- 3 files changed, 88 insertions(+), 59 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h index a5edf421005c..d1c3f3a71c94 100644 --- a/arch/arm/include/asm/unwind.h +++ b/arch/arm/include/asm/unwind.h @@ -30,14 +30,15 @@ enum unwind_reason_code { }; struct unwind_idx { - unsigned long addr; + unsigned long addr_offset; unsigned long insn; }; struct unwind_table { struct list_head list; - struct unwind_idx *start; - struct unwind_idx *stop; + const struct unwind_idx *start; + const struct unwind_idx *origin; + const struct unwind_idx *stop; unsigned long begin_addr; unsigned long end_addr; }; @@ -49,15 +50,6 @@ extern struct unwind_table *unwind_table_add(unsigned long start, extern void unwind_table_del(struct unwind_table *tab); extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk); -#ifdef CONFIG_ARM_UNWIND -extern int __init unwind_init(void); -#else -static inline int __init unwind_init(void) -{ - return 0; -} -#endif - #endif /* !__ASSEMBLY__ */ #ifdef CONFIG_ARM_UNWIND diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 3448a3f9cc8c..1bdd0adbb7dd 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -895,8 +895,6 @@ void __init setup_arch(char **cmdline_p) { struct machine_desc *mdesc; - unwind_init(); - setup_processor(); mdesc = setup_machine_fdt(__atags_pointer); if (!mdesc) diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index e7e8365795c3..3f03fe0c3269 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -67,7 +67,7 @@ EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2); struct unwind_ctrl_block { unsigned long vrs[16]; /* virtual register set */ - unsigned long *insn; /* pointer to the current instructions word */ + const unsigned long *insn; /* pointer to the current instructions word */ int entries; /* number of entries left to interpret */ int byte; /* current byte number in the instructions word */ }; @@ -83,8 +83,9 @@ enum regs { PC = 15 }; -extern struct unwind_idx __start_unwind_idx[]; -extern struct unwind_idx __stop_unwind_idx[]; +extern const struct unwind_idx __start_unwind_idx[]; +static const struct unwind_idx *__origin_unwind_idx; +extern const struct unwind_idx __stop_unwind_idx[]; static DEFINE_SPINLOCK(unwind_lock); static LIST_HEAD(unwind_tables); @@ -98,45 +99,99 @@ static LIST_HEAD(unwind_tables); }) /* - * Binary search in the unwind index. The entries entries are + * Binary search in the unwind index. The entries are * guaranteed to be sorted in ascending order by the linker. + * + * start = first entry + * origin = first entry with positive offset (or stop if there is no such entry) + * stop - 1 = last entry */ -static struct unwind_idx *search_index(unsigned long addr, - struct unwind_idx *first, - struct unwind_idx *last) +static const struct unwind_idx *search_index(unsigned long addr, + const struct unwind_idx *start, + const struct unwind_idx *origin, + const struct unwind_idx *stop) { - pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last); + unsigned long addr_prel31; + + pr_debug("%s(%08lx, %p, %p, %p)\n", + __func__, addr, start, origin, stop); + + /* + * only search in the section with the matching sign. This way the + * prel31 numbers can be compared as unsigned longs. + */ + if (addr < (unsigned long)start) + /* negative offsets: [start; origin) */ + stop = origin; + else + /* positive offsets: [origin; stop) */ + start = origin; + + /* prel31 for address relavive to start */ + addr_prel31 = (addr - (unsigned long)start) & 0x7fffffff; - if (addr < first->addr) { + while (start < stop - 1) { + const struct unwind_idx *mid = start + ((stop - start) >> 1); + + /* + * As addr_prel31 is relative to start an offset is needed to + * make it relative to mid. + */ + if (addr_prel31 - ((unsigned long)mid - (unsigned long)start) < + mid->addr_offset) + stop = mid; + else { + /* keep addr_prel31 relative to start */ + addr_prel31 -= ((unsigned long)mid - + (unsigned long)start); + start = mid; + } + } + + if (likely(start->addr_offset <= addr_prel31)) + return start; + else { pr_warning("unwind: Unknown symbol address %08lx\n", addr); return NULL; - } else if (addr >= last->addr) - return last; + } +} - while (first < last - 1) { - struct unwind_idx *mid = first + ((last - first + 1) >> 1); +static const struct unwind_idx *unwind_find_origin( + const struct unwind_idx *start, const struct unwind_idx *stop) +{ + pr_debug("%s(%p, %p)\n", __func__, start, stop); + while (start < stop - 1) { + const struct unwind_idx *mid = start + ((stop - start) >> 1); - if (addr < mid->addr) - last = mid; + if (mid->addr_offset >= 0x40000000) + /* negative offset */ + start = mid; else - first = mid; + /* positive offset */ + stop = mid; } - - return first; + pr_debug("%s -> %p\n", __func__, stop); + return stop; } -static struct unwind_idx *unwind_find_idx(unsigned long addr) +static const struct unwind_idx *unwind_find_idx(unsigned long addr) { - struct unwind_idx *idx = NULL; + const struct unwind_idx *idx = NULL; unsigned long flags; pr_debug("%s(%08lx)\n", __func__, addr); - if (core_kernel_text(addr)) + if (core_kernel_text(addr)) { + if (unlikely(!__origin_unwind_idx)) + __origin_unwind_idx = + unwind_find_origin(__start_unwind_idx, + __stop_unwind_idx); + /* main unwind table */ idx = search_index(addr, __start_unwind_idx, - __stop_unwind_idx - 1); - else { + __origin_unwind_idx, + __stop_unwind_idx); + } else { /* module unwind tables */ struct unwind_table *table; @@ -145,7 +200,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr) if (addr >= table->begin_addr && addr < table->end_addr) { idx = search_index(addr, table->start, - table->stop - 1); + table->origin, + table->stop); /* Move-to-front to exploit common traces */ list_move(&table->list, &unwind_tables); break; @@ -274,7 +330,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl) int unwind_frame(struct stackframe *frame) { unsigned long high, low; - struct unwind_idx *idx; + const struct unwind_idx *idx; struct unwind_ctrl_block ctrl; /* only go to a higher address on the stack */ @@ -399,7 +455,6 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size, unsigned long text_size) { unsigned long flags; - struct unwind_idx *idx; struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL); pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size, @@ -408,15 +463,12 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size, if (!tab) return tab; - tab->start = (struct unwind_idx *)start; - tab->stop = (struct unwind_idx *)(start + size); + tab->start = (const struct unwind_idx *)start; + tab->stop = (const struct unwind_idx *)(start + size); + tab->origin = unwind_find_origin(tab->start, tab->stop); tab->begin_addr = text_addr; tab->end_addr = text_addr + text_size; - /* Convert the symbol addresses to absolute values */ - for (idx = tab->start; idx < tab->stop; idx++) - idx->addr = prel31_to_addr(&idx->addr); - spin_lock_irqsave(&unwind_lock, flags); list_add_tail(&tab->list, &unwind_tables); spin_unlock_irqrestore(&unwind_lock, flags); @@ -437,16 +489,3 @@ void unwind_table_del(struct unwind_table *tab) kfree(tab); } - -int __init unwind_init(void) -{ - struct unwind_idx *idx; - - /* Convert the symbol addresses to absolute values */ - for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++) - idx->addr = prel31_to_addr(&idx->addr); - - pr_debug("unwind: ARM stack unwinding initialised\n"); - - return 0; -} -- cgit v1.2.3 From 6bd054096dce061560cee0e016e292e588dc438f Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 2 Dec 2011 18:16:01 +0100 Subject: ARM: 7185/1: perf: don't assign platform_device on unsupported CPUs In the unlikely case that a platform registers a PMU platform_device when running on a CPU that is unsupported by perf, we will encounter a NULL dereference when trying to assign the platform_device to the cpu_pmu structure. This patch checks that the CPU is supported by perf before assigning the platform_device. Reported-by: Pawel Moll Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/perf_event.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 8e9c98edc068..88b0941ce51e 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -640,6 +640,9 @@ static struct platform_device_id armpmu_plat_device_ids[] = { static int __devinit armpmu_device_probe(struct platform_device *pdev) { + if (!cpu_pmu) + return -ENODEV; + cpu_pmu->plat_device = pdev; return 0; } -- cgit v1.2.3 From d7a4c45ec24b6c6773ff302c3c9cb5ed46c8e211 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 8 Dec 2011 10:07:53 +0900 Subject: ARM: SAMSUNG: remove duplicated header include This patch removes duplicated slab header for pwm backlight. arch/arm/plat-samsung/dev-backlight.c: slab.h is included more than once. Signed-off-by: Jingoo Han Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/dev-backlight.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c index e657305644cc..a976c023b286 100644 --- a/arch/arm/plat-samsung/dev-backlight.c +++ b/arch/arm/plat-samsung/dev-backlight.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3 From de611dd4078499d5aa5ae9655652687ae630585f Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 8 Dec 2011 10:08:38 +0900 Subject: ARM: S5PV210: Set 1000ns as PWM backlight period on SMDKV210 The SMDK board uses LT3591 as backlight LED driver of LTE480WV LCD. According to the LT3591 datasheet, the switching frequency should be 1MHz. So, PWM period is calculated by following formula: PWM period = 1/switching frequency = 1/1MHz = 1000ns Thus, the PWM backlight period should be 1000ns. Signed-off-by: Jingoo Han Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/mach-smdkv210.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index a9106c392398..8662ef6e5681 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -273,6 +273,7 @@ static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = { static struct platform_pwm_backlight_data smdkv210_bl_data = { .pwm_id = 3, + .pwm_period_ns = 1000, }; static void __init smdkv210_map_io(void) -- cgit v1.2.3 From e248cd5d5f1c28c82781d4122dddd1b7c3d7b46f Mon Sep 17 00:00:00 2001 From: Amit Daniel Kachhap Date: Thu, 8 Dec 2011 10:07:08 +0900 Subject: ARM: EXYNOS: Fix for stall in case of cpu hotplug or sleep This patch adds remove_irq in place of disable_irq which is correct equivalent function for setup_irq used in exynos4_mct_tick_init. Signed-off-by: Amit Daniel Kachhap Tested-by: Inderpal Singh Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/mct.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c index 97343df8f132..959f2514796c 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/arch/arm/mach-exynos/mct.c @@ -428,9 +428,13 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt) void local_timer_stop(struct clock_event_device *evt) { + unsigned int cpu = smp_processor_id(); evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); if (mct_int_type == MCT_INT_SPI) - disable_irq(evt->irq); + if (cpu == 0) + remove_irq(evt->irq, &mct_tick0_event_irq); + else + remove_irq(evt->irq, &mct_tick1_event_irq); else disable_percpu_irq(IRQ_MCT_LOCALTIMER); } -- cgit v1.2.3 From 991a6c7d94a9be53f0302a1ada06e66a6ebf51e8 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 8 Dec 2011 10:04:49 +0900 Subject: ARM: EXYNOS: Fix build error without CONFIG_LOCAL_TIMERS arch/arm/mach-exynos/mct.c: In function 'exynos4_timer_resources': arch/arm/mach-exynos/mct.c:450: error: 'exynos4_mct_tick_isr' undeclared (first use in this function) arch/arm/mach-exynos/mct.c:450: error: (Each undeclared identifier is reported only once arch/arm/mach-exynos/mct.c:450: error: for each function it appears in.) make[1]: *** [arch/arm/mach-exynos/mct.o] Error 1 Reported-by: Kyungmin Park Acked-by: Changhwan Youn Signed-off-by: Kukjin Kim Cc: Marc Zyngier --- arch/arm/mach-exynos/mct.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c index 959f2514796c..85b5527d0918 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/arch/arm/mach-exynos/mct.c @@ -44,8 +44,6 @@ struct mct_clock_event_device { char name[10]; }; -static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick); - static void exynos4_mct_write(unsigned int value, void *addr) { void __iomem *stat_addr; @@ -264,6 +262,9 @@ static void exynos4_clockevent_init(void) } #ifdef CONFIG_LOCAL_TIMERS + +static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick); + /* Clock event handling */ static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt) { @@ -447,6 +448,7 @@ static void __init exynos4_timer_resources(void) clk_rate = clk_get_rate(mct_clk); +#ifdef CONFIG_LOCAL_TIMERS if (mct_int_type == MCT_INT_PPI) { int err; @@ -456,6 +458,7 @@ static void __init exynos4_timer_resources(void) WARN(err, "MCT: can't request IRQ %d (%d)\n", IRQ_MCT_LOCALTIMER, err); } +#endif /* CONFIG_LOCAL_TIMERS */ } static void __init exynos4_timer_init(void) -- cgit v1.2.3 From c564a0cb9d0c7f4ac50f1e9ca8bc67fd66cd550f Mon Sep 17 00:00:00 2001 From: "Jett.Zhou" Date: Wed, 30 Nov 2011 14:32:54 +0800 Subject: ARM: sa1100: fix build error arm-eabi-4.4.3-ld:--defsym zreladdr=: syntax error make[2]: *** [arch/arm/boot/compressed/vmlinux] Error 1 make[1]: *** [arch/arm/boot/compressed/vmlinux] Error 2 make: *** [uImage] Error 2 Signed-off-by: Haojian Zhuang Signed-off-by: Jett.Zhou --- arch/arm/mach-sa1100/Makefile.boot | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot index 5a616f6e5612..f7951aa04562 100644 --- a/arch/arm/mach-sa1100/Makefile.boot +++ b/arch/arm/mach-sa1100/Makefile.boot @@ -1,5 +1,5 @@ -ifeq ($(CONFIG_ARCH_SA1100),y) - zreladdr-$(CONFIG_SA1111) += 0xc0208000 +ifeq ($(CONFIG_SA1111),y) + zreladdr-y += 0xc0208000 else zreladdr-y += 0xc0008000 endif -- cgit v1.2.3 From c0d96aed8c6dd925afe9ea35491a0cd458642a86 Mon Sep 17 00:00:00 2001 From: Jason Chen Date: Wed, 30 Nov 2011 11:34:27 +0800 Subject: MXC PWM: should active during DOZE/WAIT/DBG mode Signed-off-by: Jason Chen Signed-off-by: Sascha Hauer Cc: stable@kernel.org --- arch/arm/plat-mxc/pwm.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 42d74ea59084..845de59f07ed 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -32,6 +32,9 @@ #define MX3_PWMSAR 0x0C /* PWM Sample Register */ #define MX3_PWMPR 0x10 /* PWM Period Register */ #define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4) +#define MX3_PWMCR_DOZEEN (1 << 24) +#define MX3_PWMCR_WAITEN (1 << 23) +#define MX3_PWMCR_DBGEN (1 << 22) #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16) #define MX3_PWMCR_CLKSRC_IPG (1 << 16) #define MX3_PWMCR_EN (1 << 0) @@ -77,7 +80,9 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR); writel(period_cycles, pwm->mmio_base + MX3_PWMPR); - cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN; + cr = MX3_PWMCR_PRESCALER(prescale) | + MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | + MX3_PWMCR_DBGEN | MX3_PWMCR_EN; if (cpu_is_mx25()) cr |= MX3_PWMCR_CLKSRC_IPG; -- cgit v1.2.3 From 16b3647d333a18141fc9d172e89a142250be0c57 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Sat, 12 Nov 2011 00:09:06 +0800 Subject: ARM: mx5: add __initconst for fec pdata MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Dong Aisheng Acked-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx53_evk.c | 2 +- arch/arm/mach-mx5/board-mx53_loco.c | 2 +- arch/arm/mach-mx5/board-mx53_smd.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index 6bea31ab8f85..64bbfcea6f35 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -106,7 +106,7 @@ static inline void mx53_evk_fec_reset(void) gpio_set_value(MX53_EVK_FEC_PHY_RST, 1); } -static struct fec_platform_data mx53_evk_fec_pdata = { +static const struct fec_platform_data mx53_evk_fec_pdata __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 7678f7734db6..237bdecd9331 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -242,7 +242,7 @@ static inline void mx53_loco_fec_reset(void) gpio_set_value(LOCO_FEC_PHY_RST, 1); } -static struct fec_platform_data mx53_loco_fec_data = { +static const struct fec_platform_data mx53_loco_fec_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index 59c0845eb4a6..d42132a80e8f 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c @@ -104,7 +104,7 @@ static inline void mx53_smd_fec_reset(void) gpio_set_value(SMD_FEC_PHY_RST, 1); } -static struct fec_platform_data mx53_smd_fec_data = { +static const struct fec_platform_data mx53_smd_fec_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; -- cgit v1.2.3 From 300a47b4378a3b2e7c2a423b0aa4d75fc78987d3 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Fri, 9 Dec 2011 10:46:21 +0800 Subject: ARM: imx: fix cpufreq build errors CC arch/arm/plat-mxc/cpufreq.o arch/arm/plat-mxc/cpufreq.c:203: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:203: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:203: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' arch/arm/plat-mxc/cpufreq.c:203: warning: function declaration isn't a prototype arch/arm/plat-mxc/cpufreq.c:204: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:204: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:204: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' arch/arm/plat-mxc/cpufreq.c:204: warning: function declaration isn't a prototype arch/arm/plat-mxc/cpufreq.c:205: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:205: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:205: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' arch/arm/plat-mxc/cpufreq.c:205: warning: function declaration isn't a prototype make[1]: *** [arch/arm/plat-mxc/cpufreq.o] Error 1 make: *** [arch/arm/plat-mxc] Error 2 Signed-off-by: Richard Zhao Signed-off-by: Richard Zhao Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/cpufreq.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c index 74aac96cda20..adbff706ef6f 100644 --- a/arch/arm/plat-mxc/cpufreq.c +++ b/arch/arm/plat-mxc/cpufreq.c @@ -17,6 +17,7 @@ * the CPU clock speed on the fly. */ +#include #include #include #include -- cgit v1.2.3 From 847a2ee7392e7d3278f9b82c4b503744c72ee463 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 5 Dec 2011 10:28:11 +0800 Subject: arm/imx: fix power button on imx51 babbage board Since commit 6571534 (plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired) was in, the power button on imx51 babbage board stopped working because it's pulled up by mistake. The patch removes the pull-up setting from the pad configuration for that gpio to make the power button back to work. Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx51_babbage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 5c837603ff0f..24994bb52147 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -362,7 +362,7 @@ static void __init mx51_babbage_init(void) { iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21, - PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP); + PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH); imx51_soc_init(); -- cgit v1.2.3 From 9811ccdfa94b4773c8030569bd8ec75eafa485ac Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Sun, 11 Dec 2011 20:32:25 +0100 Subject: ARM: 7204/1: arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlier arm_dma_zone_size is used by arm_bootmem_free() which is called by paging_init(). Thus it needs to be set before calling it. Signed-off-by: Arnaud Patard Acked-by: Nicolas Pitre Cc: stable@kernel.org Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 1bdd0adbb7dd..8fc2c8fcbdc6 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -902,6 +902,12 @@ void __init setup_arch(char **cmdline_p) machine_desc = mdesc; machine_name = mdesc->name; +#ifdef CONFIG_ZONE_DMA + if (mdesc->dma_zone_size) { + extern unsigned long arm_dma_zone_size; + arm_dma_zone_size = mdesc->dma_zone_size; + } +#endif if (mdesc->soft_reboot) reboot_setup("s"); @@ -932,12 +938,6 @@ void __init setup_arch(char **cmdline_p) tcm_init(); -#ifdef CONFIG_ZONE_DMA - if (mdesc->dma_zone_size) { - extern unsigned long arm_dma_zone_size; - arm_dma_zone_size = mdesc->dma_zone_size; - } -#endif #ifdef CONFIG_MULTI_IRQ_HANDLER handle_arch_irq = mdesc->handle_irq; #endif -- cgit v1.2.3 From 0c8551e5fa3833c6080542da662394817fea4616 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Mon, 12 Dec 2011 10:38:26 +0200 Subject: ARM: OMAP: mcbsp: Fix possible memory corruption Commits 09d28d ("ARM: OMAP: mcbsp: Start generalize omap2_mcbsp_set_clks_src") and 7bc0c4 ("ARM: OMAP: mcbsp: Start generalize signal muxing functions") incorrectly set two struct omap_mcbsp_platform_data fields after omap_device_build_ss and kfree calls. Fix this by moving these pdata assignments before those calls. Signed-off-by: Jarkko Nikula Reported-by: NeilBrown Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mcbsp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 292eee3be15f..28fcb27005d2 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -145,6 +145,9 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) pdata->reg_size = 4; pdata->has_ccr = true; } + pdata->set_clk_src = omap2_mcbsp_set_clk_src; + if (id == 1) + pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; if (oh->class->rev == MCBSP_CONFIG_TYPE3) { if (id == 2) @@ -174,9 +177,6 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) name, oh->name); return PTR_ERR(pdev); } - pdata->set_clk_src = omap2_mcbsp_set_clk_src; - if (id == 1) - pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; omap_mcbsp_count++; return 0; } -- cgit v1.2.3 From e5fe29c7198a1f6616286dfc8602a69da165cb3f Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Thu, 8 Dec 2011 22:23:00 +0200 Subject: ARM: OMAP: rx51: fix USB Commit 10299e2e4e3ed3b16503d4e04edd48b33083f4e2 (ARM: RX-51: Enable isp1704 power on/off) added power management for isp1704. However, the transceiver should be powered on by default, otherwise USB doesn't work at all for networking during boot. All kernels after v3.0 are affected. Cc: stable@kernel.org Signed-off-by: Felipe Contreras Reviewed-by: Sebastian Reichel [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ba1aa07bdb29..c15c5c9c9085 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -193,7 +193,7 @@ static struct platform_device rx51_charger_device = { static void __init rx51_charger_init(void) { WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, - GPIOF_OUT_INIT_LOW, "isp1704_reset")); + GPIOF_OUT_INIT_HIGH, "isp1704_reset")); platform_device_register(&rx51_charger_device); } -- cgit v1.2.3 From ddf5a25c5fdd4cc276edf451871c38002eec0f95 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 15 Dec 2011 21:47:56 +0100 Subject: ARM: unwinder: fix bisection to find origin in .idx section MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The bisection implemented in unwind_find_origin() stopped to early. If there is only a single entry left to check the original code just took the end point as origin which might be wrong. This was introduced in commit de66a979012d ("ARM: 7187/1: fix unwinding for XIP kernels"). Reported-and-tested-by: Nick Bowler Signed-off-by: Uwe Kleine-König Signed-off-by: Linus Torvalds --- arch/arm/kernel/unwind.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 3f03fe0c3269..00df012c4678 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -160,12 +160,12 @@ static const struct unwind_idx *unwind_find_origin( const struct unwind_idx *start, const struct unwind_idx *stop) { pr_debug("%s(%p, %p)\n", __func__, start, stop); - while (start < stop - 1) { + while (start < stop) { const struct unwind_idx *mid = start + ((stop - start) >> 1); if (mid->addr_offset >= 0x40000000) /* negative offset */ - start = mid; + start = mid + 1; else /* positive offset */ stop = mid; -- cgit v1.2.3