From 2eb04ae010a8fb165ba7aa56e9aa8e7980887dee Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Mon, 27 Oct 2014 16:32:35 +0100 Subject: ARM: mvebu: add missing of_node_put() call in coherency.c There is a missing of_node_put() to decrement the device_node reference counter after a of_find_matching_node() in coherency_init(). Fixes: 501f928e0097 ("ARM: mvebu: add a coherency_available() call") Cc: # v3.16+ Signed-off-by: Thomas Petazzoni Acked-by: Gregory CLEMENT Link: https://lkml.kernel.org/r/1414423955-5933-4-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/coherency.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index 2bdc3233abe2..044b51185fcc 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -400,6 +400,8 @@ int __init coherency_init(void) type == COHERENCY_FABRIC_TYPE_ARMADA_380) armada_375_380_coherency_init(np); + of_node_put(np); + return 0; } -- cgit v1.2.3 From 532425a7a7738b479406496ca4ad6b3247688e44 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 6 Nov 2014 19:56:49 +0800 Subject: ARM: dts: sun6i: Re-parent ahb1_mux to pll6 as required by dma controller The dma controller requires that the ahb1 bus clock be driven by pll6 for peripheral access to work. Previously this was done in the dma controller driver, but was since removed as part of a series to unify the ahb1_mux and ahb1 clock drivers, in 14e0e28 dmaengine: sun6i: Remove obsolete clk muxing code Unfortunately the rest of that series did not make it, leaving us with broken dma on sun6i. This patch reparents ahb1_mux to pll6 using the DT assigned-clocks properties in the dma controller node. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 543f895d18d3..2e652e2339e9 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -361,6 +361,10 @@ clocks = <&ahb1_gates 6>; resets = <&ahb1_rst 6>; #dma-cells = <1>; + + /* DMA controller requires AHB1 clocked from PLL6 */ + assigned-clocks = <&ahb1_mux>; + assigned-clock-parents = <&pll6>; }; mmc0: mmc@01c0f000 { -- cgit v1.2.3 From a926a12b5f11007d0ba9eb2e083d86054fb29a06 Mon Sep 17 00:00:00 2001 From: Shinobu Uehara Date: Thu, 30 Oct 2014 14:57:56 +0900 Subject: ARM: shmobile: r8a7790: Fix SD3CKCR address Signed-off-by: Shinobu Uehara Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/clock-r8a7790.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index 126ddafad526..f62265200592 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -68,7 +68,7 @@ #define SDCKCR 0xE6150074 #define SD2CKCR 0xE6150078 -#define SD3CKCR 0xE615007C +#define SD3CKCR 0xE615026C #define MMC0CKCR 0xE6150240 #define MMC1CKCR 0xE6150244 #define SSPCKCR 0xE6150248 -- cgit v1.2.3 From 85eb968e84686faa507daa3c5cfdfbfefc7eda95 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 5 Nov 2014 21:59:34 +0100 Subject: ARM: shmobile: r8a7740 legacy: Add missing INTCA clock for irqpin module This clock drives the irqpin controller modules. Before, it was assumed enabled by the bootloader or reset state. By making it available to the driver, we make sure it gets enabled when needed, and allow it to be managed by system or runtime PM. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/clock-r8a7740.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index 0794f0426e70..16a6b7ccbc8b 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -455,7 +455,7 @@ enum { MSTP128, MSTP127, MSTP125, MSTP116, MSTP111, MSTP100, MSTP117, - MSTP230, + MSTP230, MSTP229, MSTP222, MSTP218, MSTP217, MSTP216, MSTP214, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, @@ -479,6 +479,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */ [MSTP230] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 30, 0), /* SCIFA6 */ + [MSTP229] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 29, 0), /* INTCA */ [MSTP222] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 22, 0), /* SCIFA7 */ [MSTP218] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC1 */ [MSTP217] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* DMAC2 */ @@ -575,6 +576,10 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP222]), CLKDEV_DEV_ID("e6cd0000.serial", &mstp_clks[MSTP222]), + CLKDEV_DEV_ID("renesas_intc_irqpin.0", &mstp_clks[MSTP229]), + CLKDEV_DEV_ID("renesas_intc_irqpin.1", &mstp_clks[MSTP229]), + CLKDEV_DEV_ID("renesas_intc_irqpin.2", &mstp_clks[MSTP229]), + CLKDEV_DEV_ID("renesas_intc_irqpin.3", &mstp_clks[MSTP229]), CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP230]), CLKDEV_DEV_ID("e6cc0000.serial", &mstp_clks[MSTP230]), -- cgit v1.2.3 From 4f37828d4d69a46830e0525a065da9847fc7a819 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 5 Nov 2014 11:04:33 +0100 Subject: ARM: shmobile: r8a7740 legacy: Correct IIC0 parent clock According to the datasheet, the operating clock for IIC0 is the HPP (RT Peri) clock, not the SUB (Peri) clock. Both clocks run at the same speed (50 Mhz). This is consistent with IIC0 being located in the A4R PM domain, and IIC1 in the A3SP PM domain. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/clock-r8a7740.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index 16a6b7ccbc8b..19df9cb30495 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -474,7 +474,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP127] = SH_CLK_MSTP32(&div4_clks[DIV4_S], SMSTPCR1, 27, 0), /* CEU20 */ [MSTP125] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */ [MSTP117] = SH_CLK_MSTP32(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */ - [MSTP116] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */ + [MSTP116] = SH_CLK_MSTP32(&div4_clks[DIV4_HPP], SMSTPCR1, 16, 0), /* IIC0 */ [MSTP111] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 11, 0), /* TMU1 */ [MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */ -- cgit v1.2.3 From edd7b938637701567a54306adb27cfb4345fedc5 Mon Sep 17 00:00:00 2001 From: Shinobu Uehara Date: Thu, 30 Oct 2014 14:57:57 +0900 Subject: ARM: shmobile: r8a7790: Fix SD3CKCR address to device tree Signed-off-by: Shinobu Uehara Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index d0e17733dc1a..e20affe156c1 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -666,9 +666,9 @@ #clock-cells = <0>; clock-output-names = "sd2"; }; - sd3_clk: sd3_clk@e615007c { + sd3_clk: sd3_clk@e615026c { compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe615007c 0 4>; + reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; clock-output-names = "sd3"; -- cgit v1.2.3 From b89ff7c3c2dee189489a5f45eb8d72e106179299 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 5 Nov 2014 11:04:34 +0100 Subject: ARM: shmobile: r8a7740 dtsi: Correct IIC0 parent clock According to the datasheet, the operating clock for IIC0 is the HPP (RT Peri) clock, not the SUB (Peri) clock. Both clocks run at the same speed (50 Mhz). This is consistent with IIC0 being located in the A4R PM domain, and IIC1 in the A3SP PM domain. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7740.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index d46c213a17ad..eed697a6bd6b 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -433,7 +433,7 @@ clocks = <&cpg_clocks R8A7740_CLK_S>, <&cpg_clocks R8A7740_CLK_S>, <&sub_clk>, <&cpg_clocks R8A7740_CLK_B>, - <&sub_clk>, <&sub_clk>, + <&cpg_clocks R8A7740_CLK_HPP>, <&sub_clk>, <&cpg_clocks R8A7740_CLK_B>; #clock-cells = <1>; renesas,clock-indices = < -- cgit v1.2.3 From b207422bb92f17f4f892a9b8737d44b37fece25b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 6 Nov 2014 12:52:06 +0100 Subject: ARM: shmobile: kzm9g legacy: Set i2c clks_per_count to 2 On sh73a0/kzm9g-legacy, probing of the i2c masters fails with: i2c-sh_mobile i2c-sh_mobile.0: timing values out of range: L/H=0x208/0x1bf sh_mobile: probe of i2c-sh_mobile.0 failed with error -22 According to the datasheet, the transfer rate is derived from the HP clock (which runs at 104 MHz) divided by two. Hence i2c_sh_mobile_platform_data.clks_per_count should be set to two. Now probing succeeds, and i2c works: i2c-sh_mobile i2c-sh_mobile.0: I2C adapter 0 with bus speed 100000 Hz (L/H=0x104/0xe0) Signed-off-by: Geert Uytterhoeven Reviewed-by: Wolfram Sang Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-sh73a0.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index b7bd8e509668..328657d011d5 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -192,11 +193,18 @@ static struct resource i2c4_resources[] = { }, }; +static struct i2c_sh_mobile_platform_data i2c_platform_data = { + .clks_per_count = 2, +}; + static struct platform_device i2c0_device = { .name = "i2c-sh_mobile", .id = 0, .resource = i2c0_resources, .num_resources = ARRAY_SIZE(i2c0_resources), + .dev = { + .platform_data = &i2c_platform_data, + }, }; static struct platform_device i2c1_device = { @@ -204,6 +212,9 @@ static struct platform_device i2c1_device = { .id = 1, .resource = i2c1_resources, .num_resources = ARRAY_SIZE(i2c1_resources), + .dev = { + .platform_data = &i2c_platform_data, + }, }; static struct platform_device i2c2_device = { @@ -211,6 +222,9 @@ static struct platform_device i2c2_device = { .id = 2, .resource = i2c2_resources, .num_resources = ARRAY_SIZE(i2c2_resources), + .dev = { + .platform_data = &i2c_platform_data, + }, }; static struct platform_device i2c3_device = { @@ -218,6 +232,9 @@ static struct platform_device i2c3_device = { .id = 3, .resource = i2c3_resources, .num_resources = ARRAY_SIZE(i2c3_resources), + .dev = { + .platform_data = &i2c_platform_data, + }, }; static struct platform_device i2c4_device = { @@ -225,6 +242,9 @@ static struct platform_device i2c4_device = { .id = 4, .resource = i2c4_resources, .num_resources = ARRAY_SIZE(i2c4_resources), + .dev = { + .platform_data = &i2c_platform_data, + }, }; static const struct sh_dmae_slave_config sh73a0_dmae_slaves[] = { -- cgit v1.2.3 From 121a2f6d5f09d929fc663349ba34e248e8d07391 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 3 Nov 2014 23:20:04 +0100 Subject: ARM: tegra: Add serial port labels to Tegra124 DT These labels will be used to provide deterministic numbering of consoles in a later patch. Signed-off-by: Lucas Stach [treding@nvidia.com: drop aliases, reword commit message] Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra124.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 478c555ebd96..df2b06b29985 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -286,7 +286,7 @@ * the APB DMA based serial driver, the comptible is * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart". */ - serial@0,70006000 { + uarta: serial@0,70006000 { compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006000 0x0 0x40>; reg-shift = <2>; @@ -299,7 +299,7 @@ status = "disabled"; }; - serial@0,70006040 { + uartb: serial@0,70006040 { compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006040 0x0 0x40>; reg-shift = <2>; @@ -312,7 +312,7 @@ status = "disabled"; }; - serial@0,70006200 { + uartc: serial@0,70006200 { compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006200 0x0 0x40>; reg-shift = <2>; @@ -325,7 +325,7 @@ status = "disabled"; }; - serial@0,70006300 { + uartd: serial@0,70006300 { compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006300 0x0 0x40>; reg-shift = <2>; -- cgit v1.2.3 From c4574aa00e7c144ae4d1bfc2388433d9eb82e4d3 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 11 Nov 2014 12:49:30 -0800 Subject: ARM: dts: tegra: move serial aliases to per-board There are general changes pending to make the /aliases/serial* entries number the serial ports on the system. On Tegra, so far the ports have been just numbered dynamically as they are configured so that makes them change. To avoid this, add specific aliases per board to keep the old numbers. This allows us to change the numbering by default on future SoCs while keeping the numbering on existing boards. Signed-off-by: Olof Johansson Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra114-dalmore.dts | 1 + arch/arm/boot/dts/tegra114-roth.dts | 4 ++++ arch/arm/boot/dts/tegra114-tn7.dts | 4 ++++ arch/arm/boot/dts/tegra114.dtsi | 7 ------- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 1 + arch/arm/boot/dts/tegra124-nyan-big.dts | 1 + arch/arm/boot/dts/tegra124-venice2.dts | 1 + arch/arm/boot/dts/tegra20-harmony.dts | 1 + arch/arm/boot/dts/tegra20-iris-512.dts | 5 +++++ arch/arm/boot/dts/tegra20-medcom-wide.dts | 4 ++++ arch/arm/boot/dts/tegra20-paz00.dts | 2 ++ arch/arm/boot/dts/tegra20-seaboard.dts | 1 + arch/arm/boot/dts/tegra20-tamonten.dtsi | 1 + arch/arm/boot/dts/tegra20-trimslice.dts | 1 + arch/arm/boot/dts/tegra20-ventana.dts | 1 + arch/arm/boot/dts/tegra20-whistler.dts | 1 + arch/arm/boot/dts/tegra20.dtsi | 8 -------- arch/arm/boot/dts/tegra30-apalis-eval.dts | 4 ++++ arch/arm/boot/dts/tegra30-beaver.dts | 1 + arch/arm/boot/dts/tegra30-cardhu.dtsi | 2 ++ arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 3 +++ arch/arm/boot/dts/tegra30.dtsi | 8 -------- 22 files changed, 39 insertions(+), 23 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 5c21d216515a..8b7aa0dcdc6e 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -15,6 +15,7 @@ aliases { rtc0 = "/i2c@7000d000/tps65913@58"; rtc1 = "/rtc@7000e000"; + serial0 = &uartd; }; memory { diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts index c7c6825f11fb..a80f1e24a113 100644 --- a/arch/arm/boot/dts/tegra114-roth.dts +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -15,6 +15,10 @@ linux,initrd-end = <0x82800000>; }; + aliases { + serial0 = &uartd; + }; + firmware { trusted-foundations { compatible = "tlm,trusted-foundations"; diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts index 963662145635..2301c6601d02 100644 --- a/arch/arm/boot/dts/tegra114-tn7.dts +++ b/arch/arm/boot/dts/tegra114-tn7.dts @@ -15,6 +15,10 @@ linux,initrd-end = <0x82800000>; }; + aliases { + serial0 = &uartd; + }; + firmware { trusted-foundations { compatible = "tlm,trusted-foundations"; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 2ca9c1807f72..222f3b3f4dd5 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -9,13 +9,6 @@ compatible = "nvidia,tegra114"; interrupt-parent = <&gic>; - aliases { - serial0 = &uarta; - serial1 = &uartb; - serial2 = &uartc; - serial3 = &uartd; - }; - host1x@50000000 { compatible = "nvidia,tegra114-host1x", "simple-bus"; reg = <0x50000000 0x00028000>; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 029c9a021541..51b373ff1065 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -10,6 +10,7 @@ aliases { rtc0 = "/i2c@0,7000d000/pmic@40"; rtc1 = "/rtc@0,7000e000"; + serial0 = &uartd; }; memory { diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts index 7d0784ce4c74..53181d310247 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big.dts +++ b/arch/arm/boot/dts/tegra124-nyan-big.dts @@ -10,6 +10,7 @@ aliases { rtc0 = "/i2c@0,7000d000/pmic@40"; rtc1 = "/rtc@0,7000e000"; + serial0 = &uarta; }; memory { diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 13008858e967..5c3f7813360d 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -10,6 +10,7 @@ aliases { rtc0 = "/i2c@0,7000d000/pmic@40"; rtc1 = "/rtc@0,7000e000"; + serial0 = &uarta; }; memory { diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index a37279af687c..b926a07b9443 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -10,6 +10,7 @@ aliases { rtc0 = "/i2c@7000d000/tps6586x@34"; rtc1 = "/rtc@7000e000"; + serial0 = &uartd; }; memory { diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts index 8cfb83f42e1f..1dd7d7bfdfcc 100644 --- a/arch/arm/boot/dts/tegra20-iris-512.dts +++ b/arch/arm/boot/dts/tegra20-iris-512.dts @@ -6,6 +6,11 @@ model = "Toradex Colibri T20 512MB on Iris"; compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20"; + aliases { + serial0 = &uarta; + serial1 = &uartd; + }; + host1x@50000000 { hdmi@54280000 { status = "okay"; diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts index 1b7c56b33aca..9b87526ab0b7 100644 --- a/arch/arm/boot/dts/tegra20-medcom-wide.dts +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -6,6 +6,10 @@ model = "Avionic Design Medcom-Wide board"; compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20"; + aliases { + serial0 = &uartd; + }; + pwm@7000a000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index d4438e30de45..ed7e1009326c 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -10,6 +10,8 @@ aliases { rtc0 = "/i2c@7000d000/tps6586x@34"; rtc1 = "/rtc@7000e000"; + serial0 = &uarta; + serial1 = &uartc; }; memory { diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index a1d4bf9895d7..ea282c7c0ca5 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -10,6 +10,7 @@ aliases { rtc0 = "/i2c@7000d000/tps6586x@34"; rtc1 = "/rtc@7000e000"; + serial0 = &uartd; }; memory { diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 80e7d386ce34..13d4e6185275 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -7,6 +7,7 @@ aliases { rtc0 = "/i2c@7000d000/tps6586x@34"; rtc1 = "/rtc@7000e000"; + serial0 = &uartd; }; memory { diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 5ad87979ab13..d99af4ef9c64 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -10,6 +10,7 @@ aliases { rtc0 = "/i2c@7000c500/rtc@56"; rtc1 = "/rtc@7000e000"; + serial0 = &uarta; }; memory { diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index ca8484cccddc..04c58e9ca490 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -10,6 +10,7 @@ aliases { rtc0 = "/i2c@7000d000/tps6586x@34"; rtc1 = "/rtc@7000e000"; + serial0 = &uartd; }; memory { diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index 1843725785c9..340d81108df1 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -10,6 +10,7 @@ aliases { rtc0 = "/i2c@7000d000/max8907@3c"; rtc1 = "/rtc@7000e000"; + serial0 = &uarta; }; memory { diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 3b374c49d04d..8acf5d85c99d 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -9,14 +9,6 @@ compatible = "nvidia,tegra20"; interrupt-parent = <&intc>; - aliases { - serial0 = &uarta; - serial1 = &uartb; - serial2 = &uartc; - serial3 = &uartd; - serial4 = &uarte; - }; - host1x@50000000 { compatible = "nvidia,tegra20-host1x", "simple-bus"; reg = <0x50000000 0x00024000>; diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts index 45d40f024585..6236bdecb48b 100644 --- a/arch/arm/boot/dts/tegra30-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts @@ -11,6 +11,10 @@ rtc0 = "/i2c@7000c000/rtc@68"; rtc1 = "/i2c@7000d000/tps65911@2d"; rtc2 = "/rtc@7000e000"; + serial0 = &uarta; + serial1 = &uartb; + serial2 = &uartc; + serial3 = &uartd; }; pcie-controller@00003000 { diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index cee8f2246fdb..6b157eeabcc5 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -9,6 +9,7 @@ aliases { rtc0 = "/i2c@7000d000/tps65911@2d"; rtc1 = "/rtc@7000e000"; + serial0 = &uarta; }; memory { diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 206379546244..a1b682ea01bd 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -30,6 +30,8 @@ aliases { rtc0 = "/i2c@7000d000/tps65911@2d"; rtc1 = "/rtc@7000e000"; + serial0 = &uarta; + serial1 = &uartc; }; memory { diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts index 7793abd5bef1..4d3ddc585641 100644 --- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -10,6 +10,9 @@ rtc0 = "/i2c@7000c000/rtc@68"; rtc1 = "/i2c@7000d000/tps65911@2d"; rtc2 = "/rtc@7000e000"; + serial0 = &uarta; + serial1 = &uartb; + serial2 = &uartd; }; host1x@50000000 { diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index aa6ccea13d30..b270b9e3d455 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -9,14 +9,6 @@ compatible = "nvidia,tegra30"; interrupt-parent = <&intc>; - aliases { - serial0 = &uarta; - serial1 = &uartb; - serial2 = &uartc; - serial3 = &uartd; - serial4 = &uarte; - }; - pcie-controller@00003000 { compatible = "nvidia,tegra30-pcie"; device_type = "pci"; -- cgit v1.2.3 From edbde56a25f484d46c9e75563d3b310bde1c185e Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Thu, 13 Nov 2014 13:59:02 +0900 Subject: ARM: tegra: Remove eMMC vmmc property for roth/tn7 This property was wrong and broke eMMC since commit 52221610d ("mmc: sdhci: Improve external VDD regulator support"). Align the eMMC properties to those of other Tegra boards. Signed-off-by: Alexandre Courbot Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra114-roth.dts | 1 - arch/arm/boot/dts/tegra114-tn7.dts | 1 - 2 files changed, 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts index a80f1e24a113..54c79c5a9fbc 100644 --- a/arch/arm/boot/dts/tegra114-roth.dts +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -975,7 +975,6 @@ sdhci@78000600 { status = "okay"; bus-width = <8>; - vmmc-supply = <&vdd_1v8>; non-removable; }; diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts index 2301c6601d02..f91c2c9b2f94 100644 --- a/arch/arm/boot/dts/tegra114-tn7.dts +++ b/arch/arm/boot/dts/tegra114-tn7.dts @@ -244,7 +244,6 @@ sdhci@78000600 { status = "okay"; bus-width = <8>; - vmmc-supply = <&vdd_1v8>; non-removable; }; -- cgit v1.2.3 From 221b9bf42b26a22e6904d20f35c53aec2e73a646 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Thu, 13 Nov 2014 13:59:03 +0900 Subject: ARM: tegra: roth: Fix SD card VDD_IO regulator vddio_sdmmc3 is a vdd_io, and thus should be under the vqmmc-supply property, not vmmc-supply. Signed-off-by: Alexandre Courbot Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra114-roth.dts | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts index 54c79c5a9fbc..38acf78d7815 100644 --- a/arch/arm/boot/dts/tegra114-roth.dts +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -920,8 +920,6 @@ regulator-name = "vddio-sdmmc3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; }; ldousb { @@ -966,7 +964,7 @@ sdhci@78000400 { status = "okay"; bus-width = <4>; - vmmc-supply = <&vddio_sdmmc3>; + vqmmc-supply = <&vddio_sdmmc3>; cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>; }; -- cgit v1.2.3 From 0526f276f94758245ac5886604fe8c805c1b6d2c Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Wed, 19 Nov 2014 16:52:15 +0900 Subject: ARM: dts: Explicitly set dr_mode on exynos5250-snow Explicitly set the dr_mode for the dwc3 controller on the Snow board to host mode. This is required to ensure the controller is initialized in the right mode if the kernel is build with USB gadget support. Signed-off-by: Sjoerd Simons Reviewed-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-snow.dts | 4 ++++ arch/arm/boot/dts/exynos5250.dtsi | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index e51fcef884a4..60429ad1c5d8 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -624,4 +624,8 @@ num-cs = <1>; }; +&usbdrd_dwc3 { + dr_mode = "host"; +}; + #include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index f21b9aa00fbb..d55c1a2eb798 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -555,7 +555,7 @@ #size-cells = <1>; ranges; - dwc3 { + usbdrd_dwc3: dwc3 { compatible = "synopsys,dwc3"; reg = <0x12000000 0x10000>; interrupts = <0 72 0>; -- cgit v1.2.3 From 49e41938f8a53d01d1c5d133a038acb9650008f9 Mon Sep 17 00:00:00 2001 From: Tyler Baker Date: Tue, 18 Nov 2014 11:10:53 -0800 Subject: ARM: multi_v7_defconfig: fix failure setting CPU voltage by enabling dependent I2C controller This patch fixes a long standing issue introduced during the 3.16 merge window. Shortly after the merge, exynos5250-based arndale boards began to produce the following errors: kern.err kernel: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage kern.err kernel: cpufreq: __target_index: Failed to change cpu frequency: -22 Further analysis revealed that the S5M8767 voltage regulator used on the exynos5250-based arndale board utilizes the S3C2410 I2C controller. If the S3C2410 I2C controller driver is not enabled, the S5M8767 voltage regulator fails to probe. Therefore a dependency exists between these two drivers. In the exynos_defconfig both CONFIG_REGULATOR_S5M8767 and CONFIG_I2C_S3C2410 options are enabled, and no errors are produced. However, in the multi_v7_defconfig only the CONFIG_REGULATOR_S5M8767 option is enabled and the errors are present. So let's enable the CONFIG_I2C_S3C2410 option in the multi_v7_defconfig to allow the S5M8767 voltage regulator to probe. Signed-off-by: Tyler Baker Acked-by: Kukjin Kim Signed-off-by: Kevin Hilman --- arch/arm/configs/multi_v7_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 3487046d8a78..9d7a32f93fcf 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -217,6 +217,7 @@ CONFIG_I2C_CADENCE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_EXYNOS5=y CONFIG_I2C_MV64XXX=y +CONFIG_I2C_S3C2410=y CONFIG_I2C_SIRF=y CONFIG_I2C_TEGRA=y CONFIG_I2C_ST=y -- cgit v1.2.3 From 0788148935c3a0fae3cca6af72943b9628bf8a54 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 19 Nov 2014 17:07:43 +0900 Subject: ARM: exynos_defconfig: Enable max77802 rtc and clock drivers Commit 6e80e3d87549 ("ARM: exynos_defconfig: Enable MAX77802") enabled support for the max77802 regulators but the PMIC also has a Real-Time-Clock (RTC) and 2-channel 32kHz clock outputs. Enable the kernel config options to have the drivers for these devices built-in since they are present in many Exynos boards. Signed-off-by: Javier Martinez Canillas Acked-by: Kevin Hilman Tested-by: Kevin Hilman Signed-off-by: Kukjin Kim --- arch/arm/configs/exynos_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 72058b8a6f4d..e21ef830a483 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -142,11 +142,13 @@ CONFIG_MMC_DW_IDMAC=y CONFIG_MMC_DW_EXYNOS=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MAX77686=y +CONFIG_RTC_DRV_MAX77802=y CONFIG_RTC_DRV_S5M=y CONFIG_RTC_DRV_S3C=y CONFIG_DMADEVICES=y CONFIG_PL330_DMA=y CONFIG_COMMON_CLK_MAX77686=y +CONFIG_COMMON_CLK_MAX77802=y CONFIG_COMMON_CLK_S2MPS11=y CONFIG_EXYNOS_IOMMU=y CONFIG_IIO=y -- cgit v1.2.3 From ef59a20ba375aeb97b3150a118318884743452a8 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Fri, 21 Nov 2014 15:29:00 +0100 Subject: ARM: 8216/1: xscale: correct auxiliary register in suspend/resume According to the manuals I have, XScale auxiliary register should be reached with opc_2 = 1 instead of crn = 1. cpu_xscale_proc_init correctly uses c1, c0, 1 arguments, but cpu_xscale_do_suspend and cpu_xscale_do_resume use c1, c1, 0. Correct suspend/resume functions to also use c1, c0, 1. The issue was primarily noticed thanks to qemu reporing "unsupported instruction" on the pxa suspend path. Confirmed in PXA210/250 and PXA255 XScale Core manuals and in PXA270 and PXA320 Developers Guides. Harware tested by me on tosa (pxa255). Robert confirmed on pxa270 board. Tested-by: Robert Jarzmik Signed-off-by: Dmitry Eremin-Solenikov Acked-by: Robert Jarzmik Cc: stable@vger.kernel.org Signed-off-by: Russell King --- arch/arm/mm/proc-xscale.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 23259f104c66..afa2b3c4df4a 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -535,7 +535,7 @@ ENTRY(cpu_xscale_do_suspend) mrc p15, 0, r5, c15, c1, 0 @ CP access reg mrc p15, 0, r6, c13, c0, 0 @ PID mrc p15, 0, r7, c3, c0, 0 @ domain ID - mrc p15, 0, r8, c1, c1, 0 @ auxiliary control reg + mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg mrc p15, 0, r9, c1, c0, 0 @ control reg bic r4, r4, #2 @ clear frequency change bit stmia r0, {r4 - r9} @ store cp regs @@ -552,7 +552,7 @@ ENTRY(cpu_xscale_do_resume) mcr p15, 0, r6, c13, c0, 0 @ PID mcr p15, 0, r7, c3, c0, 0 @ domain ID mcr p15, 0, r1, c2, c0, 0 @ translation table base addr - mcr p15, 0, r8, c1, c1, 0 @ auxiliary control reg + mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg mov r0, r9 @ control register b cpu_resume_mmu ENDPROC(cpu_xscale_do_resume) -- cgit v1.2.3 From 7cbb87d67e38cfc55680290a706fd7517f10050d Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Tue, 28 Oct 2014 19:36:45 +0000 Subject: arm64: KVM: fix unmapping with 48-bit VAs Currently if using a 48-bit VA, tearing down the hyp page tables (which can happen in the absence of a GICH or GICV resource) results in the rather nasty splat below, evidently becasue we access a table that doesn't actually exist. Commit 38f791a4e499792e (arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2) added a pgd_none check to __create_hyp_mappings to account for the additional level of tables, but didn't add a corresponding check to unmap_range, and this seems to be the source of the problem. This patch adds the missing pgd_none check, ensuring we don't try to access tables that don't exist. Original splat below: kvm [1]: Using HYP init bounce page @83fe94a000 kvm [1]: Cannot obtain GICH resource Unable to handle kernel paging request at virtual address ffff7f7fff000000 pgd = ffff800000770000 [ffff7f7fff000000] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc2+ #89 task: ffff8003eb500000 ti: ffff8003eb45c000 task.ti: ffff8003eb45c000 PC is at unmap_range+0x120/0x580 LR is at free_hyp_pgds+0xac/0xe4 pc : [] lr : [] pstate: 80000045 sp : ffff8003eb45fbf0 x29: ffff8003eb45fbf0 x28: ffff800000736000 x27: ffff800000735000 x26: ffff7f7fff000000 x25: 0000000040000000 x24: ffff8000006f5000 x23: 0000000000000000 x22: 0000007fffffffff x21: 0000800000000000 x20: 0000008000000000 x19: 0000000000000000 x18: ffff800000648000 x17: ffff800000537228 x16: 0000000000000000 x15: 000000000000001f x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000020 x11: 0000000000000062 x10: 0000000000000006 x9 : 0000000000000000 x8 : 0000000000000063 x7 : 0000000000000018 x6 : 00000003ff000000 x5 : ffff800000744188 x4 : 0000000000000001 x3 : 0000000040000000 x2 : ffff800000000000 x1 : 0000007fffffffff x0 : 000000003fffffff Process swapper/0 (pid: 1, stack limit = 0xffff8003eb45c058) Stack: (0xffff8003eb45fbf0 to 0xffff8003eb460000) fbe0: eb45fcb0 ffff8003 0009cad8 ffff8000 fc00: 00000000 00000080 00736140 ffff8000 00736000 ffff8000 00000000 00007c80 fc20: 00000000 00000080 006f5000 ffff8000 00000000 00000080 00743000 ffff8000 fc40: 00735000 ffff8000 006d3030 ffff8000 006fe7b8 ffff8000 00000000 00000080 fc60: ffffffff 0000007f fdac1000 ffff8003 fd94b000 ffff8003 fda47000 ffff8003 fc80: 00502b40 ffff8000 ff000000 ffff7f7f fdec6000 00008003 fdac1630 ffff8003 fca0: eb45fcb0 ffff8003 ffffffff 0000007f eb45fd00 ffff8003 0009b378 ffff8000 fcc0: ffffffea 00000000 006fe000 ffff8000 00736728 ffff8000 00736120 ffff8000 fce0: 00000040 00000000 00743000 ffff8000 006fe7b8 ffff8000 0050cd48 00000000 fd00: eb45fd60 ffff8003 00096070 ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd20: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00000000 00000000 fd40: 00000ae0 00000000 006aa25c ffff8000 eb45fd60 ffff8003 0017ca44 00000002 fd60: eb45fdc0 ffff8003 0009a33c ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd80: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00735000 ffff8000 fda0: 006d3090 ffff8000 006aa25c ffff8000 00735000 ffff8000 006d3030 ffff8000 fdc0: eb45fdd0 ffff8003 000814c0 ffff8000 eb45fe50 ffff8003 006aaac4 ffff8000 fde0: 006ddd90 ffff8000 00000006 00000000 006d3000 ffff8000 00000095 00000000 fe00: 006a1e90 ffff8000 00735000 ffff8000 006d3000 ffff8000 006aa25c ffff8000 fe20: 00735000 ffff8000 006d3030 ffff8000 eb45fe50 ffff8003 006fac68 ffff8000 fe40: 00000006 00000006 fe293ee6 ffff8003 eb45feb0 ffff8003 004f8ee8 ffff8000 fe60: 004f8ed4 ffff8000 00735000 ffff8000 00000000 00000000 00000000 00000000 fe80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 fea0: 00000000 00000000 00000000 00000000 00000000 00000000 000843d0 ffff8000 fec0: 004f8ed4 ffff8000 00000000 00000000 00000000 00000000 00000000 00000000 fee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffa0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000005 00000000 ffe0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Call trace: [] unmap_range+0x120/0x580 [] free_hyp_pgds+0xa8/0xe4 [] kvm_arch_init+0x268/0x44c [] kvm_init+0x24/0x260 [] arm_init+0x18/0x24 [] do_one_initcall+0x88/0x1a0 [] kernel_init_freeable+0x148/0x1e8 [] kernel_init+0x10/0xd4 Code: 8b000263 92628479 d1000720 eb01001f (f9400340) ---[ end trace 3bc230562e926fa4 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Mark Rutland Cc: Catalin Marinas Cc: Jungseok Lee Acked-by: Marc Zyngier Acked-by: Christoffer Dall Signed-off-by: Marc Zyngier Signed-off-by: Paolo Bonzini --- arch/arm/kvm/mmu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 57a403a5c22b..79d3fbfb5b0e 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -197,7 +197,8 @@ static void unmap_range(struct kvm *kvm, pgd_t *pgdp, pgd = pgdp + pgd_index(addr); do { next = kvm_pgd_addr_end(addr, end); - unmap_puds(kvm, pgd, addr, next); + if (!pgd_none(*pgd)) + unmap_puds(kvm, pgd, addr, next); } while (pgd++, addr = next, addr != end); } -- cgit v1.2.3 From bb55e9b131d70ab9e30d73ab1342ad4907f9e0de Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Mon, 10 Nov 2014 09:33:55 +0100 Subject: arm/arm64: kvm: drop inappropriate use of kvm_is_mmio_pfn() Instead of using kvm_is_mmio_pfn() to decide whether a host region should be stage 2 mapped with device attributes, add a new static function kvm_is_device_pfn() that disregards RAM pages with the reserved bit set, as those should usually not be mapped as device memory. Signed-off-by: Ard Biesheuvel Signed-off-by: Paolo Bonzini --- arch/arm/kvm/mmu.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 79d3fbfb5b0e..8664ff17cbbe 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -835,6 +835,11 @@ static bool kvm_is_write_fault(struct kvm_vcpu *vcpu) return kvm_vcpu_dabt_iswrite(vcpu); } +static bool kvm_is_device_pfn(unsigned long pfn) +{ + return !pfn_valid(pfn); +} + static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, struct kvm_memory_slot *memslot, unsigned long hva, unsigned long fault_status) @@ -905,7 +910,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, if (is_error_pfn(pfn)) return -EFAULT; - if (kvm_is_mmio_pfn(pfn)) + if (kvm_is_device_pfn(pfn)) mem_type = PAGE_S2_DEVICE; spin_lock(&kvm->mmu_lock); -- cgit v1.2.3 From 9a343b9eb8c1f8db9dae804709a6578379a538f3 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 26 Nov 2014 17:55:31 +0000 Subject: ARM: tegra: irq: fix buggy usage of irq_data irq field The crazy gic_arch_extn thing that Tegra uses contains multiple references to the irq field in struct irq_data, and uses this to directly poke hardware register. But irq is the *virtual* irq number, something that has nothing to do with the actual HW irq (stored in the hwirq field). And once we put the stacked domain code in action, the whole thing explodes, as these two values are *very* different: root@bacon-fat:~# cat /proc/interrupts CPU0 CPU1 16: 25801 2075 GIC 29 twd 17: 0 0 GIC 73 timer0 112: 0 0 GPIO 58 c8000600.sdhci cd 123: 0 0 GPIO 69 c8000200.sdhci cd 279: 1126 0 GIC 122 serial 281: 0 0 GIC 70 7000c000.i2c 282: 0 0 GIC 116 7000c400.i2c 283: 0 0 GIC 124 7000c500.i2c 284: 300 0 GIC 85 7000d000.i2c [...] Just replacing all instances of irq with hwirq fixes the issue. Signed-off-by: Marc Zyngier Acked-by: Thierry Reding Signed-off-by: Arnd Bergmann --- arch/arm/mach-tegra/irq.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index da7be13aecce..ab95f5391a2b 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -99,42 +99,42 @@ static inline void tegra_irq_write_mask(unsigned int irq, unsigned long reg) static void tegra_mask(struct irq_data *d) { - if (d->irq < FIRST_LEGACY_IRQ) + if (d->hwirq < FIRST_LEGACY_IRQ) return; - tegra_irq_write_mask(d->irq, ICTLR_CPU_IER_CLR); + tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IER_CLR); } static void tegra_unmask(struct irq_data *d) { - if (d->irq < FIRST_LEGACY_IRQ) + if (d->hwirq < FIRST_LEGACY_IRQ) return; - tegra_irq_write_mask(d->irq, ICTLR_CPU_IER_SET); + tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IER_SET); } static void tegra_ack(struct irq_data *d) { - if (d->irq < FIRST_LEGACY_IRQ) + if (d->hwirq < FIRST_LEGACY_IRQ) return; - tegra_irq_write_mask(d->irq, ICTLR_CPU_IEP_FIR_CLR); + tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IEP_FIR_CLR); } static void tegra_eoi(struct irq_data *d) { - if (d->irq < FIRST_LEGACY_IRQ) + if (d->hwirq < FIRST_LEGACY_IRQ) return; - tegra_irq_write_mask(d->irq, ICTLR_CPU_IEP_FIR_CLR); + tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IEP_FIR_CLR); } static int tegra_retrigger(struct irq_data *d) { - if (d->irq < FIRST_LEGACY_IRQ) + if (d->hwirq < FIRST_LEGACY_IRQ) return 0; - tegra_irq_write_mask(d->irq, ICTLR_CPU_IEP_FIR_SET); + tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IEP_FIR_SET); return 1; } @@ -142,7 +142,7 @@ static int tegra_retrigger(struct irq_data *d) #ifdef CONFIG_PM_SLEEP static int tegra_set_wake(struct irq_data *d, unsigned int enable) { - u32 irq = d->irq; + u32 irq = d->hwirq; u32 index, mask; if (irq < FIRST_LEGACY_IRQ || -- cgit v1.2.3 From 995ab5189d1d7264e79e665dfa032a19b3ac646e Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 25 Nov 2014 18:43:15 +0100 Subject: ARM: 8222/1: mvebu: enable strex backoff delay Under extremely rare conditions, in an MPCore node consisting of at least 3 CPUs, two CPUs trying to perform a STREX to data on the same shared cache line can enter a livelock situation. This patch enables the HW mechanism that overcomes the bug. This fixes the incorrect setup of the STREX backoff delay bit due to a wrong description in the specification. Note that enabling the STREX backoff delay mechanism is done by leaving the bit *cleared*, while the bit was currently being set by the proc-v7.S code. [Thomas: adapt to latest mainline, slightly reword the commit log, add stable markers.] Fixes: de4901933f6d ("arm: mm: Add support for PJ4B cpu and init routines") Cc: # v3.8+ Signed-off-by: Nadav Haklai Signed-off-by: Thomas Petazzoni Acked-by: Gregory CLEMENT Acked-by: Jason Cooper Signed-off-by: Russell King --- arch/arm/mm/proc-v7.S | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index b3a947863ac7..22ac2a6fbfe3 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -270,7 +270,6 @@ __v7_pj4b_setup: /* Auxiliary Debug Modes Control 1 Register */ #define PJ4B_STATIC_BP (1 << 2) /* Enable Static BP */ #define PJ4B_INTER_PARITY (1 << 8) /* Disable Internal Parity Handling */ -#define PJ4B_BCK_OFF_STREX (1 << 5) /* Enable the back off of STREX instr */ #define PJ4B_CLEAN_LINE (1 << 16) /* Disable data transfer for clean line */ /* Auxiliary Debug Modes Control 2 Register */ @@ -293,7 +292,6 @@ __v7_pj4b_setup: /* Auxiliary Debug Modes Control 1 Register */ mrc p15, 1, r0, c15, c1, 1 orr r0, r0, #PJ4B_CLEAN_LINE - orr r0, r0, #PJ4B_BCK_OFF_STREX orr r0, r0, #PJ4B_INTER_PARITY bic r0, r0, #PJ4B_STATIC_BP mcr p15, 1, r0, c15, c1, 1 -- cgit v1.2.3 From 3f4aa45ceea5789a4aade536acc27f2e0d3da5e1 Mon Sep 17 00:00:00 2001 From: Vladimir Murzin Date: Thu, 27 Nov 2014 11:39:04 +0100 Subject: ARM: 8226/1: cacheflush: get rid of restarting block We cannot restart cacheflush safely if a process provides user-defined signal handler and signal is pending. In this case -EINTR is returned and it is expected that process re-invokes syscall. However, there are a few problems with that: * looks like nobody bothers checking return value from cacheflush * but if it did, we don't provide the restart address for that, so the process has to use the same range again * ...and again, what might lead to looping forever So, remove cacheflush restarting code and terminate cache flushing as early as fatal signal is pending. Cc: stable@vger.kernel.org # 3.12+ Reported-by: Chanho Min Signed-off-by: Vladimir Murzin Acked-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/thread_info.h | 11 ----------- arch/arm/kernel/traps.c | 31 ++----------------------------- 2 files changed, 2 insertions(+), 40 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index fc44d3761f9e..ce73ab635414 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -44,16 +44,6 @@ struct cpu_context_save { __u32 extra[2]; /* Xscale 'acc' register, etc */ }; -struct arm_restart_block { - union { - /* For user cache flushing */ - struct { - unsigned long start; - unsigned long end; - } cache; - }; -}; - /* * low level task data that entry.S needs immediate access to. * __switch_to() assumes cpu_context follows immediately after cpu_domain. @@ -79,7 +69,6 @@ struct thread_info { unsigned long thumbee_state; /* ThumbEE Handler Base register */ #endif struct restart_block restart_block; - struct arm_restart_block arm_restart_block; }; #define INIT_THREAD_INFO(tsk) \ diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 0c8b10801d36..9f5d81881eb6 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -533,8 +533,6 @@ static int bad_syscall(int n, struct pt_regs *regs) return regs->ARM_r0; } -static long do_cache_op_restart(struct restart_block *); - static inline int __do_cache_op(unsigned long start, unsigned long end) { @@ -543,24 +541,8 @@ __do_cache_op(unsigned long start, unsigned long end) do { unsigned long chunk = min(PAGE_SIZE, end - start); - if (signal_pending(current)) { - struct thread_info *ti = current_thread_info(); - - ti->restart_block = (struct restart_block) { - .fn = do_cache_op_restart, - }; - - ti->arm_restart_block = (struct arm_restart_block) { - { - .cache = { - .start = start, - .end = end, - }, - }, - }; - - return -ERESTART_RESTARTBLOCK; - } + if (fatal_signal_pending(current)) + return 0; ret = flush_cache_user_range(start, start + chunk); if (ret) @@ -573,15 +555,6 @@ __do_cache_op(unsigned long start, unsigned long end) return 0; } -static long do_cache_op_restart(struct restart_block *unused) -{ - struct arm_restart_block *restart_block; - - restart_block = ¤t_thread_info()->arm_restart_block; - return __do_cache_op(restart_block->cache.start, - restart_block->cache.end); -} - static inline int do_cache_op(unsigned long start, unsigned long end, int flags) { -- cgit v1.2.3