From 7e91c7df29b5e196de3dc6f086c8937973bd0b88 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Tue, 7 Feb 2017 19:58:02 +0200 Subject: swiotlb-xen: implement xen_swiotlb_dma_mmap callback This function creates userspace mapping for the DMA-coherent memory. Signed-off-by: Stefano Stabellini Signed-off-by: Oleksandr Dmytryshyn Signed-off-by: Andrii Anisov Signed-off-by: Konrad Rzeszutek Wilk --- arch/arm/xen/mm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index bd62d94f8ac5..cd1684e4e864 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -198,6 +198,7 @@ static struct dma_map_ops xen_swiotlb_dma_ops = { .unmap_page = xen_swiotlb_unmap_page, .dma_supported = xen_swiotlb_dma_supported, .set_dma_mask = xen_swiotlb_set_dma_mask, + .mmap = xen_swiotlb_dma_mmap, }; int __init xen_mm_init(void) -- cgit v1.2.3 From 69369f52d28a34c84acb6f2a8a585e743441566a Mon Sep 17 00:00:00 2001 From: Andrii Anisov Date: Tue, 7 Feb 2017 19:58:03 +0200 Subject: swiotlb-xen: implement xen_swiotlb_get_sgtable callback Signed-off-by: Andrii Anisov Signed-off-by: Stefano Stabellini Signed-off-by: Konrad Rzeszutek Wilk --- arch/arm/xen/mm.c | 1 + drivers/xen/swiotlb-xen.c | 28 ++++++++++++++++++++++++++++ include/xen/swiotlb-xen.h | 6 ++++++ 3 files changed, 35 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index cd1684e4e864..76ea48a614e1 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -199,6 +199,7 @@ static struct dma_map_ops xen_swiotlb_dma_ops = { .dma_supported = xen_swiotlb_dma_supported, .set_dma_mask = xen_swiotlb_set_dma_mask, .mmap = xen_swiotlb_dma_mmap, + .get_sgtable = xen_swiotlb_get_sgtable, }; int __init xen_mm_init(void) diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index c7f61fc0572a..23e30b4e1fb6 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -699,3 +699,31 @@ xen_swiotlb_dma_mmap(struct device *dev, struct vm_area_struct *vma, return dma_common_mmap(dev, vma, cpu_addr, dma_addr, size); } EXPORT_SYMBOL_GPL(xen_swiotlb_dma_mmap); + +/* + * This function should be called with the pages from the current domain only, + * passing pages mapped from other domains would lead to memory corruption. + */ +int +xen_swiotlb_get_sgtable(struct device *dev, struct sg_table *sgt, + void *cpu_addr, dma_addr_t handle, size_t size, + unsigned long attrs) +{ +#if defined(CONFIG_ARM) || defined(CONFIG_ARM64) + if (__generic_dma_ops(dev)->get_sgtable) { +#if 0 + /* + * This check verifies that the page belongs to the current domain and + * is not one mapped from another domain. + * This check is for debug only, and should not go to production build + */ + unsigned long bfn = PHYS_PFN(dma_to_phys(dev, handle)); + BUG_ON (!page_is_ram(bfn)); +#endif + return __generic_dma_ops(dev)->get_sgtable(dev, sgt, cpu_addr, + handle, size, attrs); + } +#endif + return dma_common_get_sgtable(dev, sgt, cpu_addr, handle, size); +} +EXPORT_SYMBOL_GPL(xen_swiotlb_get_sgtable); diff --git a/include/xen/swiotlb-xen.h b/include/xen/swiotlb-xen.h index a315c876aaa9..1f6d78f044b6 100644 --- a/include/xen/swiotlb-xen.h +++ b/include/xen/swiotlb-xen.h @@ -2,6 +2,7 @@ #define __LINUX_SWIOTLB_XEN_H #include +#include #include extern int xen_swiotlb_init(int verbose, bool early); @@ -60,4 +61,9 @@ extern int xen_swiotlb_dma_mmap(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, dma_addr_t dma_addr, size_t size, unsigned long attrs); + +extern int +xen_swiotlb_get_sgtable(struct device *dev, struct sg_table *sgt, + void *cpu_addr, dma_addr_t handle, size_t size, + unsigned long attrs); #endif /* __LINUX_SWIOTLB_XEN_H */ -- cgit v1.2.3 From 179125085bd4ca70e8e028913193a93653bd12f7 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 14 Feb 2017 10:26:03 -0800 Subject: ARM: OMAP3: Fix smartreflex platform data regression Commit d9d9cec02835 ("ARM: OMAP2+: Remove legacy data from hwmod for omap3") dropped platform data that should no longer be used as we're booting with device tree. It turns out that smartreflex is still using platform data and produces the following errors during probe: smartreflex smartreflex.0: invalid resource smartreflex smartreflex.0: omap_sr_probe: ioremap fail smartreflex: probe of smartreflex.0 failed with error -22 smartreflex smartreflex.1: invalid resource smartreflex smartreflex.1: omap_sr_probe: ioremap fail smartreflex: probe of smartreflex.1 failed with error -22 Let's fix the regression by adding back the smartreflex hwmod data. The long term is to update the smartreflex driver to use device tree based probing. Fixes: d9d9cec02835 ("ARM: OMAP2+: Remove legacy data from hwmod for omap3") Reported-by: Adam Ford Tested-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 56f917ec8621..507ff0795a8e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -2112,11 +2112,20 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = { }; /* L4 CORE -> SR1 interface */ +static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = { + { + .pa_start = OMAP34XX_SR1_BASE, + .pa_end = OMAP34XX_SR1_BASE + SZ_1K - 1, + .flags = ADDR_TYPE_RT, + }, + { }, +}; static struct omap_hwmod_ocp_if omap34xx_l4_core__sr1 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap34xx_sr1_hwmod, .clk = "sr_l4_ick", + .addr = omap3_sr1_addr_space, .user = OCP_USER_MPU, }; @@ -2124,15 +2133,25 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr1 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap36xx_sr1_hwmod, .clk = "sr_l4_ick", + .addr = omap3_sr1_addr_space, .user = OCP_USER_MPU, }; /* L4 CORE -> SR1 interface */ +static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = { + { + .pa_start = OMAP34XX_SR2_BASE, + .pa_end = OMAP34XX_SR2_BASE + SZ_1K - 1, + .flags = ADDR_TYPE_RT, + }, + { }, +}; static struct omap_hwmod_ocp_if omap34xx_l4_core__sr2 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap34xx_sr2_hwmod, .clk = "sr_l4_ick", + .addr = omap3_sr2_addr_space, .user = OCP_USER_MPU, }; @@ -2140,6 +2159,7 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr2 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap36xx_sr2_hwmod, .clk = "sr_l4_ick", + .addr = omap3_sr2_addr_space, .user = OCP_USER_MPU, }; -- cgit v1.2.3 From 448c077eeb02240c430db2a2c3bf5285a4c65d66 Mon Sep 17 00:00:00 2001 From: Matthijs van Duin Date: Thu, 16 Feb 2017 01:05:04 +0100 Subject: ARM: OMAP5 / DRA7: Fix HYP mode boot for thumb2 build 'adr' yields a data-pointer, not a function-pointer. Fixes: 999f934de195 ("ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode") Signed-off-by: Matthijs van Duin Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap-headsmp.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index fe36ce2734d4..4c6f14cf92a8 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -17,6 +17,7 @@ #include #include +#include #include "omap44xx.h" @@ -66,7 +67,7 @@ wait_2: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 cmp r0, r4 bne wait_2 ldr r12, =API_HYP_ENTRY - adr r0, hyp_boot + badr r0, hyp_boot smc #0 hyp_boot: b omap_secondary_startup -- cgit v1.2.3 From f5432f01240ef69a391940d623b6a51768aefd65 Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Wed, 15 Feb 2017 20:42:52 +0530 Subject: ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI commit 50e95b6b854c ("ARM: dts: am57xx-idk: Add Industrial output support") added the TPIC2810 device-tree node under SPI bus instead of I2C1. Fix it. Tested on AM572x IDK by driving on-board LEDs connected to TPIC2810 Fixes: 50e95b6b854c ("ARM: dts: am57xx-idk: Add Industrial output support") Signed-off-by: Sekhar Nori Acked-by: Andrew F. Davis Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-idk-common.dtsi | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 814a720d5c3d..d0a55b845690 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -311,6 +311,13 @@ /* ID & VBUS GPIOs provided in board dts */ }; }; + + tpic2810: tpic2810@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + }; }; &mcspi3 { @@ -326,13 +333,6 @@ spi-max-frequency = <1000000>; spi-cpol; }; - - tpic2810: tpic2810@60 { - compatible = "ti,tpic2810"; - reg = <0x60>; - gpio-controller; - #gpio-cells = <2>; - }; }; &uart3 { -- cgit v1.2.3 From 0341735226dcfa9d3727ff001e030f879ab91ca2 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 17 Feb 2017 06:51:17 -0800 Subject: ARM: omap2plus_defconfig: Enable INPUT_MOUSEDEV as loadable modules Otherwise mice won't be happy. Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 195c98b85568..77ffccfd0c3f 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -188,6 +188,7 @@ CONFIG_WL12XX=m CONFIG_WL18XX=m CONFIG_WLCORE_SPI=m CONFIG_WLCORE_SDIO=m +CONFIG_INPUT_MOUSEDEV=m CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=m CONFIG_KEYBOARD_ATKBD=m -- cgit v1.2.3 From 48385896e9c53e1061f103e1271a6be9a7ea00c4 Mon Sep 17 00:00:00 2001 From: Teresa Remmet Date: Fri, 10 Feb 2017 13:29:07 +0100 Subject: ARM: dts: am335x-pcm953: Fix legacy wakeup source binding Replaced the legacy binding "gpio-key,wakeup" with "wakeup-source" as noted in the kernel documentation. Signed-off-by: Teresa Remmet Reported-by: Sudeep Holla Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-pcm-953.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi index 02981eae96b9..1ec8e0d80191 100644 --- a/arch/arm/boot/dts/am335x-pcm-953.dtsi +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -63,14 +63,14 @@ label = "home"; linux,code = ; gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; - gpio-key,wakeup; + wakeup-source; }; button@1 { label = "menu"; linux,code = ; gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; - gpio-key,wakeup; + wakeup-source; }; }; -- cgit v1.2.3 From 7807e086a2d1f69cc1a57958cac04fea79fc2112 Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Sat, 11 Feb 2017 14:02:49 +0100 Subject: ARM: OMAP2+: gpmc-onenand: propagate error on initialization failure gpmc_probe_onenand_child returns success even on gpmc_onenand_init failure. Fix that. Signed-off-by: Ladislav Michl Acked-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc-onenand.c | 10 ++++++---- drivers/memory/omap-gpmc.c | 4 +--- include/linux/omap-gpmc.h | 5 +++-- 3 files changed, 10 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 8633c703546a..2944af820558 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -367,7 +367,7 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr) return ret; } -void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) +int gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) { int err; struct device *dev = &gpmc_onenand_device.dev; @@ -393,15 +393,17 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) if (err < 0) { dev_err(dev, "Cannot request GPMC CS %d, error %d\n", gpmc_onenand_data->cs, err); - return; + return err; } gpmc_onenand_resource.end = gpmc_onenand_resource.start + ONENAND_IO_SIZE - 1; - if (platform_device_register(&gpmc_onenand_device) < 0) { + err = platform_device_register(&gpmc_onenand_device); + if (err) { dev_err(dev, "Unable to register OneNAND device\n"); gpmc_cs_free(gpmc_onenand_data->cs); - return; } + + return err; } diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c index 5457c361ad58..bf0fe0137dfe 100644 --- a/drivers/memory/omap-gpmc.c +++ b/drivers/memory/omap-gpmc.c @@ -1947,9 +1947,7 @@ static int gpmc_probe_onenand_child(struct platform_device *pdev, if (!of_property_read_u32(child, "dma-channel", &val)) gpmc_onenand_data->dma_channel = val; - gpmc_onenand_init(gpmc_onenand_data); - - return 0; + return gpmc_onenand_init(gpmc_onenand_data); } #else static int gpmc_probe_onenand_child(struct platform_device *pdev, diff --git a/include/linux/omap-gpmc.h b/include/linux/omap-gpmc.h index 35d0fd7a4948..e821a3132a3e 100644 --- a/include/linux/omap-gpmc.h +++ b/include/linux/omap-gpmc.h @@ -88,10 +88,11 @@ static inline int gpmc_nand_init(struct omap_nand_platform_data *d, #endif #if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) -extern void gpmc_onenand_init(struct omap_onenand_platform_data *d); +extern int gpmc_onenand_init(struct omap_onenand_platform_data *d); #else #define board_onenand_data NULL -static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d) +static inline int gpmc_onenand_init(struct omap_onenand_platform_data *d) { + return 0; } #endif -- cgit v1.2.3 From ac28e47ccc3ff8dabce1aec6b224760c3e524044 Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Tue, 21 Feb 2017 10:44:45 +0100 Subject: ARM: OMAP2+: Remove legacy gpmc-nand.c This code is no longer used and can be removed as we are using device tree. Removing this code also removes a dependency between drivers/mtd and arch/arm/mach-omap2 making furhter driver changes easier. Signed-off-by: Ladislav Michl [tony@atomide.com: removed from header too, updated comments] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Makefile | 3 - arch/arm/mach-omap2/gpmc-nand.c | 154 ---------------------------------------- include/linux/omap-gpmc.h | 11 --- 3 files changed, 168 deletions(-) delete mode 100644 arch/arm/mach-omap2/gpmc-nand.c (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 093458b62c8d..c89757abb0ae 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -241,6 +241,3 @@ obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o obj-y += $(onenand-m) $(onenand-y) - -nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o -obj-y += $(nand-m) $(nand-y) diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c deleted file mode 100644 index f6ac027f3c3b..000000000000 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ /dev/null @@ -1,154 +0,0 @@ -/* - * gpmc-nand.c - * - * Copyright (C) 2009 Texas Instruments - * Vimal Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include - -#include - -#include "soc.h" - -/* minimum size for IO mapping */ -#define NAND_IO_SIZE 4 - -static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) -{ - /* platforms which support all ECC schemes */ - if (soc_is_am33xx() || soc_is_am43xx() || cpu_is_omap44xx() || - soc_is_omap54xx() || soc_is_dra7xx()) - return 1; - - if (ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW || - ecc_opt == OMAP_ECC_BCH8_CODE_HW_DETECTION_SW) { - if (cpu_is_omap24xx()) - return 0; - else if (cpu_is_omap3630() && (GET_OMAP_REVISION() == 0)) - return 0; - else - return 1; - } - - /* OMAP3xxx do not have ELM engine, so cannot support ECC schemes - * which require H/W based ECC error detection */ - if ((cpu_is_omap34xx() || cpu_is_omap3630()) && - ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) || - (ecc_opt == OMAP_ECC_BCH8_CODE_HW))) - return 0; - - /* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */ - if (ecc_opt == OMAP_ECC_HAM1_CODE_HW || - ecc_opt == OMAP_ECC_HAM1_CODE_SW) - return 1; - else - return 0; -} - -/* This function will go away once the device-tree convertion is complete */ -static void gpmc_set_legacy(struct omap_nand_platform_data *gpmc_nand_data, - struct gpmc_settings *s) -{ - /* Enable RD PIN Monitoring Reg */ - if (gpmc_nand_data->dev_ready) { - s->wait_on_read = true; - s->wait_on_write = true; - } - - if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) - s->device_width = GPMC_DEVWIDTH_16BIT; - else - s->device_width = GPMC_DEVWIDTH_8BIT; -} - -int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, - struct gpmc_timings *gpmc_t) -{ - int err = 0; - struct gpmc_settings s; - struct platform_device *pdev; - struct resource gpmc_nand_res[] = { - { .flags = IORESOURCE_MEM, }, - { .flags = IORESOURCE_IRQ, }, - { .flags = IORESOURCE_IRQ, }, - }; - - BUG_ON(gpmc_nand_data->cs >= GPMC_CS_NUM); - - err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE, - (unsigned long *)&gpmc_nand_res[0].start); - if (err < 0) { - pr_err("omap2-gpmc: Cannot request GPMC CS %d, error %d\n", - gpmc_nand_data->cs, err); - return err; - } - gpmc_nand_res[0].end = gpmc_nand_res[0].start + NAND_IO_SIZE - 1; - gpmc_nand_res[1].start = gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE); - gpmc_nand_res[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT); - - memset(&s, 0, sizeof(struct gpmc_settings)); - gpmc_set_legacy(gpmc_nand_data, &s); - - s.device_nand = true; - - if (gpmc_t) { - err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t, &s); - if (err < 0) { - pr_err("omap2-gpmc: Unable to set gpmc timings: %d\n", - err); - return err; - } - } - - err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s); - if (err < 0) - goto out_free_cs; - - err = gpmc_configure(GPMC_CONFIG_WP, 0); - if (err < 0) - goto out_free_cs; - - if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) { - pr_err("omap2-nand: Unsupported NAND ECC scheme selected\n"); - err = -EINVAL; - goto out_free_cs; - } - - - pdev = platform_device_alloc("omap2-nand", gpmc_nand_data->cs); - if (pdev) { - err = platform_device_add_resources(pdev, gpmc_nand_res, - ARRAY_SIZE(gpmc_nand_res)); - if (!err) - pdev->dev.platform_data = gpmc_nand_data; - } else { - err = -ENOMEM; - } - if (err) - goto out_free_pdev; - - err = platform_device_add(pdev); - if (err) { - dev_err(&pdev->dev, "Unable to register NAND device\n"); - goto out_free_pdev; - } - - return 0; - -out_free_pdev: - platform_device_put(pdev); -out_free_cs: - gpmc_cs_free(gpmc_nand_data->cs); - - return err; -} diff --git a/include/linux/omap-gpmc.h b/include/linux/omap-gpmc.h index e821a3132a3e..fd0de00c0d77 100644 --- a/include/linux/omap-gpmc.h +++ b/include/linux/omap-gpmc.h @@ -76,17 +76,6 @@ struct gpmc_timings; struct omap_nand_platform_data; struct omap_onenand_platform_data; -#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) -extern int gpmc_nand_init(struct omap_nand_platform_data *d, - struct gpmc_timings *gpmc_t); -#else -static inline int gpmc_nand_init(struct omap_nand_platform_data *d, - struct gpmc_timings *gpmc_t) -{ - return 0; -} -#endif - #if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) extern int gpmc_onenand_init(struct omap_onenand_platform_data *d); #else -- cgit v1.2.3 From 10e5778f54765c96fe0c8f104b7a030e5b35bc72 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sat, 4 Mar 2017 07:02:10 -0800 Subject: ARM: OMAP2+: Fix device node reference counts After commit 0549bde0fcb1 ("of: fix of_node leak caused in of_find_node_opts_by_path"), the following error may be reported when running omap images. OF: ERROR: Bad of_node_put() on /ocp@68000000 CPU: 0 PID: 0 Comm: swapper Not tainted 4.10.0-rc7-next-20170210 #1 Hardware name: Generic OMAP3-GP (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x98/0xac) [] (dump_stack) from [] (kobject_release+0x48/0x7c) [] (kobject_release) from [] (of_find_node_by_name+0x74/0x94) [] (of_find_node_by_name) from [] (omap3xxx_hwmod_is_hs_ip_block_usable+0x24/0x2c) [] (omap3xxx_hwmod_is_hs_ip_block_usable) from [] (omap3xxx_hwmod_init+0x180/0x274) [] (omap3xxx_hwmod_init) from [] (omap3_init_early+0xa0/0x11c) [] (omap3_init_early) from [] (omap3430_init_early+0x8/0x30) [] (omap3430_init_early) from [] (setup_arch+0xc04/0xc34) [] (setup_arch) from [] (start_kernel+0x68/0x38c) [] (start_kernel) from [<8020807c>] (0x8020807c) of_find_node_by_name() drops the reference to the passed device node. The commit referenced above exposes this problem. To fix the problem, use of_get_child_by_name() instead of of_find_node_by_name(); of_get_child_by_name() does not drop the reference count of passed device nodes. While semantically different, we only look for immediate children of the passed device node, so of_get_child_by_name() is a more appropriate function to use anyway. Release the reference to the device node obtained with of_get_child_by_name() after it is no longer needed to avoid another device node leak. While at it, clean up the code and change the return type of omap3xxx_hwmod_is_hs_ip_block_usable() to bool to match its use and the return type of of_device_is_available(). Cc: Qi Hou Cc: Peter Rosin Cc: Rob Herring Signed-off-by: Guenter Roeck Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 507ff0795a8e..0fa08c1e4701 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3131,16 +3131,20 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_hwmod_ocp_ifs[] __initdata = { * Return: 0 if device named @dev_name is not likely to be accessible, * or 1 if it is likely to be accessible. */ -static int __init omap3xxx_hwmod_is_hs_ip_block_usable(struct device_node *bus, - const char *dev_name) +static bool __init omap3xxx_hwmod_is_hs_ip_block_usable(struct device_node *bus, + const char *dev_name) { + struct device_node *node; + bool available; + if (!bus) - return (omap_type() == OMAP2_DEVICE_TYPE_GP) ? 1 : 0; + return omap_type() == OMAP2_DEVICE_TYPE_GP; - if (of_device_is_available(of_find_node_by_name(bus, dev_name))) - return 1; + node = of_get_child_by_name(bus, dev_name); + available = of_device_is_available(node); + of_node_put(node); - return 0; + return available; } int __init omap3xxx_hwmod_init(void) -- cgit v1.2.3 From b92675d998a9fa37fe9e0e35053a95b4a23c158b Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sat, 4 Mar 2017 07:02:11 -0800 Subject: ARM: OMAP2+: Release device node after it is no longer needed. The device node returned by of_find_node_by_name() needs to be released after it is no longer needed to avoid a device node leak. Signed-off-by: Guenter Roeck Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 0fa08c1e4701..1435fee39a89 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3213,15 +3213,20 @@ int __init omap3xxx_hwmod_init(void) if (h_sham && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "sham")) { r = omap_hwmod_register_links(h_sham); - if (r < 0) + if (r < 0) { + of_node_put(bus); return r; + } } if (h_aes && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "aes")) { r = omap_hwmod_register_links(h_aes); - if (r < 0) + if (r < 0) { + of_node_put(bus); return r; + } } + of_node_put(bus); /* * Register hwmod links specific to certain ES levels of a -- cgit v1.2.3 From 9e10889a3177340dcda7d29c6d8fbd97247b007b Mon Sep 17 00:00:00 2001 From: Romain Izard Date: Fri, 17 Feb 2017 16:12:50 +0100 Subject: Revert "ARM: at91/dt: sama5d2: Use new compatible for ohci node" This reverts commit cab43282682e ("ARM: at91/dt: sama5d2: Use new compatible for ohci node") It depends from commit 7150bc9b4d43 ("usb: ohci-at91: Forcibly suspend ports while USB suspend") which was reverted and implemented differently. With the new implementation, the compatible string must remain the same. The compatible string introduced by this commit has been used in the default SAMA5D2 dtsi starting from Linux 4.8. As it has never been working correctly in an official release, removing it should not be breaking the stability rules. Fixes: cab43282682e ("ARM: at91/dt: sama5d2: Use new compatible for ohci node") Signed-off-by: Romain Izard cc: Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/sama5d2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 22332be72140..528b4e9c6d3d 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -266,7 +266,7 @@ }; usb1: ohci@00400000 { - compatible = "atmel,sama5d2-ohci", "usb-ohci"; + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00400000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; -- cgit v1.2.3 From e51b999e11b84a766d78347afe9287e2c5b91c97 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Wed, 8 Feb 2017 15:37:11 -0500 Subject: ARM: dts: BCM5301X: Fix UARTs on bcm953012k The UARTs are outputting garbage on the console. This is due to a speed issue. We can simply use the clock speed (which is now defined in the DTSI file) and everything works fine. Signed-off-by: Jon Mason Fixes: cdc36b22 ("ARM: dts: enable clock support for BCM5301X") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm953012k.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index bfd923096a8c..da5aa8f5ffa7 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -53,10 +53,9 @@ }; &uart0 { - clock-frequency = <62499840>; + status = "okay"; }; &uart1 { - clock-frequency = <62499840>; status = "okay"; }; -- cgit v1.2.3 From 88d1fa70c21d7b431386cfe70cdc514d98b0c9c4 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Wed, 8 Feb 2017 15:37:12 -0500 Subject: ARM: dts: BCM5301X: Fix memory start address Memory starts at 0x80000000, not 0. 0 "works" due to mirrior of the first 128M of RAM to that address. Anything greater than 128M will quickly find nothing there. Correcting the starting address has everything working again. Signed-off-by: Jon Mason Fixes: 7eb05f6d ("ARM: dts: bcm5301x: Add BCM SVK DT files") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm953012k.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index da5aa8f5ffa7..ae31a5826e91 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -48,7 +48,7 @@ }; memory { - reg = <0x00000000 0x10000000>; + reg = <0x80000000 0x10000000>; }; }; -- cgit v1.2.3 From 0c2bf9f95983fe30aa2f6463cb761cd42c2d521a Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Thu, 2 Mar 2017 19:21:32 -0500 Subject: ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit GIC_PPI flags were misconfigured for the timers, resulting in errors like: [ 0.000000] GIC: PPI11 is secure or misconfigured Changing them to being edge triggered corrects the issue Suggested-by: Rafał Miłecki Signed-off-by: Jon Mason Fixes: d27509f1 ("ARM: BCM5301X: add dts files for BCM4708 SoC") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm5301x.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 4fbb089cf5ad..00de62dc0042 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -66,14 +66,14 @@ timer@20200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x20200 0x100>; - interrupts = ; + interrupts = ; clocks = <&periph_clk>; }; local-timer@20600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x20600 0x100>; - interrupts = ; + interrupts = ; clocks = <&periph_clk>; }; -- cgit v1.2.3 From 39319f504b5d91e853f5ec7753a56e43915fcaf4 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 30 Nov 2016 12:05:03 +0100 Subject: ARM: sun8i: Fix the mali clock rate The Mali clock rate was improperly assumed to be 408MHz, while it was really 384Mhz, 408MHz being the "extreme" frequency, and definitely not stable. Switch for the stable, correct frequency for the GPU. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a23-a33.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index a952cc0703cc..8a3ed21cb7bc 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -495,7 +495,7 @@ resets = <&ccu RST_BUS_GPU>; assigned-clocks = <&ccu CLK_GPU>; - assigned-clock-rates = <408000000>; + assigned-clock-rates = <384000000>; }; gic: interrupt-controller@01c81000 { -- cgit v1.2.3 From f050fe7a9164945dd1c28be05bf00e8cfb082ccf Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Mon, 20 Feb 2017 12:30:11 +0000 Subject: arm: KVM: Survive unknown traps from guests Currently we BUG() if we see a HSR.EC value we don't recognise. As configurable disables/enables are added to the architecture (controlled by RES1/RES0 bits respectively), with associated synchronous exceptions, it may be possible for a guest to trigger exceptions with classes that we don't recognise. While we can't service these exceptions in a manner useful to the guest, we can avoid bringing down the host. Per ARM DDI 0406C.c, all currently unallocated HSR EC encodings are reserved, and per ARM DDI 0487A.k_iss10775, page G6-4395, EC values within the range 0x00 - 0x2c are reserved for future use with synchronous exceptions, and EC values within the range 0x2d - 0x3f may be used for either synchronous or asynchronous exceptions. The patch makes KVM handle any unknown EC by injecting an UNDEFINED exception into the guest, with a corresponding (ratelimited) warning in the host dmesg. We could later improve on this with with a new (opt-in) exit to the host userspace. Cc: Dave Martin Cc: Suzuki K Poulose Reviewed-by: Christoffer Dall Signed-off-by: Mark Rutland Signed-off-by: Marc Zyngier --- arch/arm/include/asm/kvm_arm.h | 1 + arch/arm/kvm/handle_exit.c | 19 ++++++++++++------- 2 files changed, 13 insertions(+), 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h index e22089fb44dc..a3f0b3d50089 100644 --- a/arch/arm/include/asm/kvm_arm.h +++ b/arch/arm/include/asm/kvm_arm.h @@ -209,6 +209,7 @@ #define HSR_EC_IABT_HYP (0x21) #define HSR_EC_DABT (0x24) #define HSR_EC_DABT_HYP (0x25) +#define HSR_EC_MAX (0x3f) #define HSR_WFI_IS_WFE (_AC(1, UL) << 0) diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c index 4e40d1955e35..96af65a30d78 100644 --- a/arch/arm/kvm/handle_exit.c +++ b/arch/arm/kvm/handle_exit.c @@ -79,7 +79,19 @@ static int kvm_handle_wfx(struct kvm_vcpu *vcpu, struct kvm_run *run) return 1; } +static int kvm_handle_unknown_ec(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + u32 hsr = kvm_vcpu_get_hsr(vcpu); + + kvm_pr_unimpl("Unknown exception class: hsr: %#08x\n", + hsr); + + kvm_inject_undefined(vcpu); + return 1; +} + static exit_handle_fn arm_exit_handlers[] = { + [0 ... HSR_EC_MAX] = kvm_handle_unknown_ec, [HSR_EC_WFI] = kvm_handle_wfx, [HSR_EC_CP15_32] = kvm_handle_cp15_32, [HSR_EC_CP15_64] = kvm_handle_cp15_64, @@ -98,13 +110,6 @@ static exit_handle_fn kvm_get_exit_handler(struct kvm_vcpu *vcpu) { u8 hsr_ec = kvm_vcpu_trap_get_class(vcpu); - if (hsr_ec >= ARRAY_SIZE(arm_exit_handlers) || - !arm_exit_handlers[hsr_ec]) { - kvm_err("Unknown exception class: hsr: %#08x\n", - (unsigned int)kvm_vcpu_get_hsr(vcpu)); - BUG(); - } - return arm_exit_handlers[hsr_ec]; } -- cgit v1.2.3 From 12aff99723901bcc0e2a6a34343a4f62c371fdd9 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 7 Feb 2017 17:14:14 -0200 Subject: ARM: dts: imx6sx-udoo-neo: Fix reboot hang After issuing a 'reboot' command the imx6sx-udoo-neo board does not reboot as expected and it just hangs instead. In mainline kernel only LDO enabled mode is supported. Do not provide arm-supply/soc-supply nodes in the device tree, so that the board operates in LDO enabled mode and can then successfully reboot via watchdog. Fixes: 76e691fc7653b85d39 ("ARM: dts: imx6sx: Add UDOO Neo support") Signed-off-by: Fabio Estevam Tested-by: Breno Lima Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi index 49f466fe0b1d..dcfc97591433 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi +++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi @@ -121,11 +121,6 @@ }; }; -&cpu0 { - arm-supply = <&sw1a_reg>; - soc-supply = <&sw1c_reg>; -}; - &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; -- cgit v1.2.3 From 7af4df85796589e60a2dfc0f821eca0c4bbce4d2 Mon Sep 17 00:00:00 2001 From: Linu Cherian Date: Wed, 8 Mar 2017 11:38:33 +0530 Subject: KVM: arm/arm64: Enable KVM_CAP_NR_MEMSLOTS on arm/arm64 Return KVM_USER_MEM_SLOTS for userspace capability query on NR_MEMSLOTS. Reviewed-by: Christoffer Dall Signed-off-by: Linu Cherian Signed-off-by: Marc Zyngier --- arch/arm/kvm/arm.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index c9a2103faeb9..96dba7cd8be7 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -221,6 +221,9 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) case KVM_CAP_MAX_VCPUS: r = KVM_MAX_VCPUS; break; + case KVM_CAP_NR_MEMSLOTS: + r = KVM_USER_MEM_SLOTS; + break; case KVM_CAP_MSI_DEVID: if (!kvm) r = -EINVAL; -- cgit v1.2.3 From 3e92f94a3b8e925a6dd7ec88a5794b2084b5fb65 Mon Sep 17 00:00:00 2001 From: Linu Cherian Date: Wed, 8 Mar 2017 11:38:34 +0530 Subject: KVM: arm/arm64: Remove KVM_PRIVATE_MEM_SLOTS definition that are unused arm/arm64 architecture doesnt use private memslots, hence removing KVM_PRIVATE_MEM_SLOTS macro definition. Reviewed-by: Christoffer Dall Signed-off-by: Linu Cherian Signed-off-by: Marc Zyngier --- arch/arm/include/asm/kvm_host.h | 1 - arch/arm64/include/asm/kvm_host.h | 1 - 2 files changed, 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index cc495d799c67..31ee468ce667 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -30,7 +30,6 @@ #define __KVM_HAVE_ARCH_INTC_INITIALIZED #define KVM_USER_MEM_SLOTS 32 -#define KVM_PRIVATE_MEM_SLOTS 4 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1 #define KVM_HAVE_ONE_REG #define KVM_HALT_POLL_NS_DEFAULT 500000 diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index f21fd3894370..6ac17ee887c9 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -31,7 +31,6 @@ #define __KVM_HAVE_ARCH_INTC_INITIALIZED #define KVM_USER_MEM_SLOTS 32 -#define KVM_PRIVATE_MEM_SLOTS 4 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1 #define KVM_HALT_POLL_NS_DEFAULT 500000 -- cgit v1.2.3 From 9849a5697d3defb2087cb6b9be5573a142697889 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Thu, 9 Mar 2017 17:24:05 +0300 Subject: arch, mm: convert all architectures to use 5level-fixup.h If an architecture uses 4level-fixup.h we don't need to do anything as it includes 5level-fixup.h. If an architecture uses pgtable-nop*d.h, define __ARCH_USE_5LEVEL_HACK before inclusion of the header. It makes asm-generic code to use 5level-fixup.h. If an architecture has 4-level paging or folds levels on its own, include 5level-fixup.h directly. Signed-off-by: Kirill A. Shutemov Acked-by: Michal Hocko Signed-off-by: Linus Torvalds --- arch/arc/include/asm/hugepage.h | 1 + arch/arc/include/asm/pgtable.h | 1 + arch/arm/include/asm/pgtable.h | 1 + arch/arm64/include/asm/pgtable-types.h | 4 ++++ arch/avr32/include/asm/pgtable-2level.h | 1 + arch/cris/include/asm/pgtable.h | 1 + arch/frv/include/asm/pgtable.h | 1 + arch/h8300/include/asm/pgtable.h | 1 + arch/hexagon/include/asm/pgtable.h | 1 + arch/ia64/include/asm/pgtable.h | 2 ++ arch/metag/include/asm/pgtable.h | 1 + arch/microblaze/include/asm/page.h | 3 ++- arch/mips/include/asm/pgtable-32.h | 1 + arch/mips/include/asm/pgtable-64.h | 1 + arch/mn10300/include/asm/page.h | 1 + arch/nios2/include/asm/pgtable.h | 1 + arch/openrisc/include/asm/pgtable.h | 1 + arch/powerpc/include/asm/book3s/32/pgtable.h | 1 + arch/powerpc/include/asm/book3s/64/pgtable.h | 3 +++ arch/powerpc/include/asm/nohash/32/pgtable.h | 1 + arch/powerpc/include/asm/nohash/64/pgtable-4k.h | 3 +++ arch/powerpc/include/asm/nohash/64/pgtable-64k.h | 1 + arch/s390/include/asm/pgtable.h | 1 + arch/score/include/asm/pgtable.h | 1 + arch/sh/include/asm/pgtable-2level.h | 1 + arch/sh/include/asm/pgtable-3level.h | 1 + arch/sparc/include/asm/pgtable_64.h | 1 + arch/tile/include/asm/pgtable_32.h | 1 + arch/tile/include/asm/pgtable_64.h | 1 + arch/um/include/asm/pgtable-2level.h | 1 + arch/um/include/asm/pgtable-3level.h | 1 + arch/unicore32/include/asm/pgtable.h | 1 + arch/x86/include/asm/pgtable_types.h | 4 ++++ arch/xtensa/include/asm/pgtable.h | 1 + 34 files changed, 46 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arc/include/asm/hugepage.h b/arch/arc/include/asm/hugepage.h index 317ff773e1ca..b18fcb606908 100644 --- a/arch/arc/include/asm/hugepage.h +++ b/arch/arc/include/asm/hugepage.h @@ -11,6 +11,7 @@ #define _ASM_ARC_HUGEPAGE_H #include +#define __ARCH_USE_5LEVEL_HACK #include static inline pte_t pmd_pte(pmd_t pmd) diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index e94ca72b974e..ee22d40afef4 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -37,6 +37,7 @@ #include #include +#define __ARCH_USE_5LEVEL_HACK #include #include diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index a8d656d9aec7..1c462381c225 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -20,6 +20,7 @@ #else +#define __ARCH_USE_5LEVEL_HACK #include #include #include diff --git a/arch/arm64/include/asm/pgtable-types.h b/arch/arm64/include/asm/pgtable-types.h index 69b2fd41503c..345a072b5856 100644 --- a/arch/arm64/include/asm/pgtable-types.h +++ b/arch/arm64/include/asm/pgtable-types.h @@ -55,9 +55,13 @@ typedef struct { pteval_t pgprot; } pgprot_t; #define __pgprot(x) ((pgprot_t) { (x) } ) #if CONFIG_PGTABLE_LEVELS == 2 +#define __ARCH_USE_5LEVEL_HACK #include #elif CONFIG_PGTABLE_LEVELS == 3 +#define __ARCH_USE_5LEVEL_HACK #include +#elif CONFIG_PGTABLE_LEVELS == 4 +#include #endif #endif /* __ASM_PGTABLE_TYPES_H */ diff --git a/arch/avr32/include/asm/pgtable-2level.h b/arch/avr32/include/asm/pgtable-2level.h index 425dd567b5b9..d5b1c63993ec 100644 --- a/arch/avr32/include/asm/pgtable-2level.h +++ b/arch/avr32/include/asm/pgtable-2level.h @@ -8,6 +8,7 @@ #ifndef __ASM_AVR32_PGTABLE_2LEVEL_H #define __ASM_AVR32_PGTABLE_2LEVEL_H +#define __ARCH_USE_5LEVEL_HACK #include /* diff --git a/arch/cris/include/asm/pgtable.h b/arch/cris/include/asm/pgtable.h index 2a3210ba4c72..fa3a73004cc5 100644 --- a/arch/cris/include/asm/pgtable.h +++ b/arch/cris/include/asm/pgtable.h @@ -6,6 +6,7 @@ #define _CRIS_PGTABLE_H #include +#define __ARCH_USE_5LEVEL_HACK #include #ifndef __ASSEMBLY__ diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h index a0513d463a1f..ab6e7e961b54 100644 --- a/arch/frv/include/asm/pgtable.h +++ b/arch/frv/include/asm/pgtable.h @@ -16,6 +16,7 @@ #ifndef _ASM_PGTABLE_H #define _ASM_PGTABLE_H +#include #include #include #include diff --git a/arch/h8300/include/asm/pgtable.h b/arch/h8300/include/asm/pgtable.h index 8341db67821d..7d265d28ba5e 100644 --- a/arch/h8300/include/asm/pgtable.h +++ b/arch/h8300/include/asm/pgtable.h @@ -1,5 +1,6 @@ #ifndef _H8300_PGTABLE_H #define _H8300_PGTABLE_H +#define __ARCH_USE_5LEVEL_HACK #include #include #define pgtable_cache_init() do { } while (0) diff --git a/arch/hexagon/include/asm/pgtable.h b/arch/hexagon/include/asm/pgtable.h index 49eab8136ec3..24a9177fb897 100644 --- a/arch/hexagon/include/asm/pgtable.h +++ b/arch/hexagon/include/asm/pgtable.h @@ -26,6 +26,7 @@ */ #include #include +#define __ARCH_USE_5LEVEL_HACK #include /* A handy thing to have if one has the RAM. Declared in head.S */ diff --git a/arch/ia64/include/asm/pgtable.h b/arch/ia64/include/asm/pgtable.h index 384794e665fc..6cc22c8d8923 100644 --- a/arch/ia64/include/asm/pgtable.h +++ b/arch/ia64/include/asm/pgtable.h @@ -587,8 +587,10 @@ extern struct page *zero_page_memmap_ptr; #if CONFIG_PGTABLE_LEVELS == 3 +#define __ARCH_USE_5LEVEL_HACK #include #endif +#include #include #endif /* _ASM_IA64_PGTABLE_H */ diff --git a/arch/metag/include/asm/pgtable.h b/arch/metag/include/asm/pgtable.h index ffa3a3a2ecad..0c151e5af079 100644 --- a/arch/metag/include/asm/pgtable.h +++ b/arch/metag/include/asm/pgtable.h @@ -6,6 +6,7 @@ #define _METAG_PGTABLE_H #include +#define __ARCH_USE_5LEVEL_HACK #include /* Invalid regions on Meta: 0x00000000-0x001FFFFF and 0xFFFF0000-0xFFFFFFFF */ diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h index fd850879854d..d506bb0893f9 100644 --- a/arch/microblaze/include/asm/page.h +++ b/arch/microblaze/include/asm/page.h @@ -95,7 +95,8 @@ typedef struct { unsigned long pgd; } pgd_t; # else /* CONFIG_MMU */ typedef struct { unsigned long ste[64]; } pmd_t; typedef struct { pmd_t pue[1]; } pud_t; -typedef struct { pud_t pge[1]; } pgd_t; +typedef struct { pud_t p4e[1]; } p4d_t; +typedef struct { p4d_t pge[1]; } pgd_t; # endif /* CONFIG_MMU */ # define pte_val(x) ((x).pte) diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h index d21f3da7bdb6..6f94bed571c4 100644 --- a/arch/mips/include/asm/pgtable-32.h +++ b/arch/mips/include/asm/pgtable-32.h @@ -16,6 +16,7 @@ #include #include +#define __ARCH_USE_5LEVEL_HACK #include extern int temp_tlb_entry; diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h index 514cbc0a6a67..130a2a6c1531 100644 --- a/arch/mips/include/asm/pgtable-64.h +++ b/arch/mips/include/asm/pgtable-64.h @@ -17,6 +17,7 @@ #include #include +#define __ARCH_USE_5LEVEL_HACK #if defined(CONFIG_PAGE_SIZE_64KB) && !defined(CONFIG_MIPS_VA_BITS_48) #include #else diff --git a/arch/mn10300/include/asm/page.h b/arch/mn10300/include/asm/page.h index 3810a6f740fd..dfe730a5ede0 100644 --- a/arch/mn10300/include/asm/page.h +++ b/arch/mn10300/include/asm/page.h @@ -57,6 +57,7 @@ typedef struct page *pgtable_t; #define __pgd(x) ((pgd_t) { (x) }) #define __pgprot(x) ((pgprot_t) { (x) }) +#define __ARCH_USE_5LEVEL_HACK #include #endif /* !__ASSEMBLY__ */ diff --git a/arch/nios2/include/asm/pgtable.h b/arch/nios2/include/asm/pgtable.h index 298393c3cb42..db4f7d179220 100644 --- a/arch/nios2/include/asm/pgtable.h +++ b/arch/nios2/include/asm/pgtable.h @@ -22,6 +22,7 @@ #include #include +#define __ARCH_USE_5LEVEL_HACK #include #define FIRST_USER_ADDRESS 0UL diff --git a/arch/openrisc/include/asm/pgtable.h b/arch/openrisc/include/asm/pgtable.h index 3567aa7be555..ff97374ca069 100644 --- a/arch/openrisc/include/asm/pgtable.h +++ b/arch/openrisc/include/asm/pgtable.h @@ -25,6 +25,7 @@ #ifndef __ASM_OPENRISC_PGTABLE_H #define __ASM_OPENRISC_PGTABLE_H +#define __ARCH_USE_5LEVEL_HACK #include #ifndef __ASSEMBLY__ diff --git a/arch/powerpc/include/asm/book3s/32/pgtable.h b/arch/powerpc/include/asm/book3s/32/pgtable.h index 012223638815..26ed228d4dc6 100644 --- a/arch/powerpc/include/asm/book3s/32/pgtable.h +++ b/arch/powerpc/include/asm/book3s/32/pgtable.h @@ -1,6 +1,7 @@ #ifndef _ASM_POWERPC_BOOK3S_32_PGTABLE_H #define _ASM_POWERPC_BOOK3S_32_PGTABLE_H +#define __ARCH_USE_5LEVEL_HACK #include #include diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h index 1eeeb72c7015..13c39b6d5d64 100644 --- a/arch/powerpc/include/asm/book3s/64/pgtable.h +++ b/arch/powerpc/include/asm/book3s/64/pgtable.h @@ -1,9 +1,12 @@ #ifndef _ASM_POWERPC_BOOK3S_64_PGTABLE_H_ #define _ASM_POWERPC_BOOK3S_64_PGTABLE_H_ +#include + #ifndef __ASSEMBLY__ #include #endif + /* * Common bits between hash and Radix page table */ diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h index ba9921bf202e..5134ade2e850 100644 --- a/arch/powerpc/include/asm/nohash/32/pgtable.h +++ b/arch/powerpc/include/asm/nohash/32/pgtable.h @@ -1,6 +1,7 @@ #ifndef _ASM_POWERPC_NOHASH_32_PGTABLE_H #define _ASM_POWERPC_NOHASH_32_PGTABLE_H +#define __ARCH_USE_5LEVEL_HACK #include #ifndef __ASSEMBLY__ diff --git a/arch/powerpc/include/asm/nohash/64/pgtable-4k.h b/arch/powerpc/include/asm/nohash/64/pgtable-4k.h index d0db98793dd8..9f4de0a1035e 100644 --- a/arch/powerpc/include/asm/nohash/64/pgtable-4k.h +++ b/arch/powerpc/include/asm/nohash/64/pgtable-4k.h @@ -1,5 +1,8 @@ #ifndef _ASM_POWERPC_NOHASH_64_PGTABLE_4K_H #define _ASM_POWERPC_NOHASH_64_PGTABLE_4K_H + +#include + /* * Entries per page directory level. The PTE level must use a 64b record * for each page table entry. The PMD and PGD level use a 32b record for diff --git a/arch/powerpc/include/asm/nohash/64/pgtable-64k.h b/arch/powerpc/include/asm/nohash/64/pgtable-64k.h index 55b28ef3409a..1facb584dd29 100644 --- a/arch/powerpc/include/asm/nohash/64/pgtable-64k.h +++ b/arch/powerpc/include/asm/nohash/64/pgtable-64k.h @@ -1,6 +1,7 @@ #ifndef _ASM_POWERPC_NOHASH_64_PGTABLE_64K_H #define _ASM_POWERPC_NOHASH_64_PGTABLE_64K_H +#define __ARCH_USE_5LEVEL_HACK #include diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 7ed1972b1920..93e37b12e882 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -24,6 +24,7 @@ * the S390 page table tree. */ #ifndef __ASSEMBLY__ +#include #include #include #include diff --git a/arch/score/include/asm/pgtable.h b/arch/score/include/asm/pgtable.h index 0553e5cd5985..46ff8fd678a7 100644 --- a/arch/score/include/asm/pgtable.h +++ b/arch/score/include/asm/pgtable.h @@ -2,6 +2,7 @@ #define _ASM_SCORE_PGTABLE_H #include +#define __ARCH_USE_5LEVEL_HACK #include #include diff --git a/arch/sh/include/asm/pgtable-2level.h b/arch/sh/include/asm/pgtable-2level.h index 19bd89db17e7..f75cf4387257 100644 --- a/arch/sh/include/asm/pgtable-2level.h +++ b/arch/sh/include/asm/pgtable-2level.h @@ -1,6 +1,7 @@ #ifndef __ASM_SH_PGTABLE_2LEVEL_H #define __ASM_SH_PGTABLE_2LEVEL_H +#define __ARCH_USE_5LEVEL_HACK #include /* diff --git a/arch/sh/include/asm/pgtable-3level.h b/arch/sh/include/asm/pgtable-3level.h index 249a985d9648..9b1e776eca31 100644 --- a/arch/sh/include/asm/pgtable-3level.h +++ b/arch/sh/include/asm/pgtable-3level.h @@ -1,6 +1,7 @@ #ifndef __ASM_SH_PGTABLE_3LEVEL_H #define __ASM_SH_PGTABLE_3LEVEL_H +#define __ARCH_USE_5LEVEL_HACK #include /* diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h index 56e49c8f770d..8a598528ec1f 100644 --- a/arch/sparc/include/asm/pgtable_64.h +++ b/arch/sparc/include/asm/pgtable_64.h @@ -12,6 +12,7 @@ * the SpitFire page tables. */ +#include #include #include #include diff --git a/arch/tile/include/asm/pgtable_32.h b/arch/tile/include/asm/pgtable_32.h index d26a42279036..5f8c615cb5e9 100644 --- a/arch/tile/include/asm/pgtable_32.h +++ b/arch/tile/include/asm/pgtable_32.h @@ -74,6 +74,7 @@ extern unsigned long VMALLOC_RESERVE /* = CONFIG_VMALLOC_RESERVE */; #define MAXMEM (_VMALLOC_START - PAGE_OFFSET) /* We have no pmd or pud since we are strictly a two-level page table */ +#define __ARCH_USE_5LEVEL_HACK #include static inline int pud_huge_page(pud_t pud) { return 0; } diff --git a/arch/tile/include/asm/pgtable_64.h b/arch/tile/include/asm/pgtable_64.h index e96cec52f6d8..96fe58b45118 100644 --- a/arch/tile/include/asm/pgtable_64.h +++ b/arch/tile/include/asm/pgtable_64.h @@ -59,6 +59,7 @@ #ifndef __ASSEMBLY__ /* We have no pud since we are a three-level page table. */ +#define __ARCH_USE_5LEVEL_HACK #include /* diff --git a/arch/um/include/asm/pgtable-2level.h b/arch/um/include/asm/pgtable-2level.h index cfbe59752469..179c0ea87a0c 100644 --- a/arch/um/include/asm/pgtable-2level.h +++ b/arch/um/include/asm/pgtable-2level.h @@ -8,6 +8,7 @@ #ifndef __UM_PGTABLE_2LEVEL_H #define __UM_PGTABLE_2LEVEL_H +#define __ARCH_USE_5LEVEL_HACK #include /* PGDIR_SHIFT determines what a third-level page table entry can map */ diff --git a/arch/um/include/asm/pgtable-3level.h b/arch/um/include/asm/pgtable-3level.h index bae8523a162f..c4d876dfb9ac 100644 --- a/arch/um/include/asm/pgtable-3level.h +++ b/arch/um/include/asm/pgtable-3level.h @@ -7,6 +7,7 @@ #ifndef __UM_PGTABLE_3LEVEL_H #define __UM_PGTABLE_3LEVEL_H +#define __ARCH_USE_5LEVEL_HACK #include /* PGDIR_SHIFT determines what a third-level page table entry can map */ diff --git a/arch/unicore32/include/asm/pgtable.h b/arch/unicore32/include/asm/pgtable.h index 818d0f5598e3..a4f2bef37e70 100644 --- a/arch/unicore32/include/asm/pgtable.h +++ b/arch/unicore32/include/asm/pgtable.h @@ -12,6 +12,7 @@ #ifndef __UNICORE_PGTABLE_H__ #define __UNICORE_PGTABLE_H__ +#define __ARCH_USE_5LEVEL_HACK #include #include diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h index 8b4de22d6429..62484333673d 100644 --- a/arch/x86/include/asm/pgtable_types.h +++ b/arch/x86/include/asm/pgtable_types.h @@ -273,6 +273,8 @@ static inline pgdval_t pgd_flags(pgd_t pgd) } #if CONFIG_PGTABLE_LEVELS > 3 +#include + typedef struct { pudval_t pud; } pud_t; static inline pud_t native_make_pud(pmdval_t val) @@ -285,6 +287,7 @@ static inline pudval_t native_pud_val(pud_t pud) return pud.pud; } #else +#define __ARCH_USE_5LEVEL_HACK #include static inline pudval_t native_pud_val(pud_t pud) @@ -306,6 +309,7 @@ static inline pmdval_t native_pmd_val(pmd_t pmd) return pmd.pmd; } #else +#define __ARCH_USE_5LEVEL_HACK #include static inline pmdval_t native_pmd_val(pmd_t pmd) diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h index 8aa0e0d9cbb2..30dd5b2e4ad5 100644 --- a/arch/xtensa/include/asm/pgtable.h +++ b/arch/xtensa/include/asm/pgtable.h @@ -11,6 +11,7 @@ #ifndef _XTENSA_PGTABLE_H #define _XTENSA_PGTABLE_H +#define __ARCH_USE_5LEVEL_HACK #include #include #include -- cgit v1.2.3 From a1016e94cce9fb6ea56d7602263783e2d95d6e92 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 9 Mar 2017 17:14:32 +0000 Subject: ARM: wire up statx syscall Wire up the new statx syscall for ARM. Signed-off-by: Russell King --- arch/arm/tools/syscall.tbl | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl index 3c2cb5d5adfa..0bb0e9c6376c 100644 --- a/arch/arm/tools/syscall.tbl +++ b/arch/arm/tools/syscall.tbl @@ -411,3 +411,4 @@ 394 common pkey_mprotect sys_pkey_mprotect 395 common pkey_alloc sys_pkey_alloc 396 common pkey_free sys_pkey_free +397 common statx sys_statx -- cgit v1.2.3 From 9aea151f282df2b82a44fd7058a239334437c266 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 26 Feb 2017 01:02:09 +0100 Subject: ARM: dts: add the AB8500 clocks to the device tree This adds the AB8500 clocks to the device tree using the new bindings from the clk subsystem, making audio work again. Cc: Lee Jones Cc: Ulf Hansson Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/boot/dts/ste-dbx5x0.dtsi | 19 +++++++++++++++++++ arch/arm/boot/dts/ste-href.dtsi | 9 --------- arch/arm/boot/dts/ste-snowball.dts | 9 --------- 3 files changed, 19 insertions(+), 18 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 82d8c4771293..162e1eb5373d 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -14,6 +14,7 @@ #include #include #include +#include #include "skeleton.dtsi" / { @@ -603,6 +604,11 @@ interrupt-controller; #interrupt-cells = <2>; + ab8500_clock: clock-controller { + compatible = "stericsson,ab8500-clk"; + #clock-cells = <1>; + }; + ab8500_gpio: ab8500-gpio { compatible = "stericsson,ab8500-gpio"; gpio-controller; @@ -686,6 +692,8 @@ ab8500-pwm { compatible = "stericsson,ab8500-pwm"; + clocks = <&ab8500_clock AB8500_SYSCLK_INT>; + clock-names = "intclk"; }; ab8500-debugfs { @@ -700,6 +708,9 @@ V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>; V-DMIC-supply = <&ab8500_ldo_dmic_reg>; + clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>; + clock-names = "audioclk"; + stericsson,earpeice-cmv = <950>; /* Units in mV. */ }; @@ -1095,6 +1106,14 @@ status = "disabled"; }; + sound { + compatible = "stericsson,snd-soc-mop500"; + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>; + clock-names = "sysclk", "ulpclk", "intclk"; + }; + msp0: msp@80123000 { compatible = "stericsson,ux500-msp-i2s"; reg = <0x80123000 0x1000>; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index f37f9e10713c..9e359e4f342e 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -186,15 +186,6 @@ status = "okay"; }; - sound { - compatible = "stericsson,snd-soc-mop500"; - - stericsson,cpu-dai = <&msp1 &msp3>; - stericsson,audio-codec = <&codec>; - clocks = <&prcmu_clk PRCMU_SYSCLK>; - clock-names = "sysclk"; - }; - msp0: msp@80123000 { pinctrl-names = "default"; pinctrl-0 = <&msp0_default_mode>; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index dd5514def604..ade1d0d4e5f4 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -159,15 +159,6 @@ "", "", "", "", "", "", "", ""; }; - sound { - compatible = "stericsson,snd-soc-mop500"; - - stericsson,cpu-dai = <&msp1 &msp3>; - stericsson,audio-codec = <&codec>; - clocks = <&prcmu_clk PRCMU_SYSCLK>; - clock-names = "sysclk"; - }; - msp0: msp@80123000 { pinctrl-names = "default"; pinctrl-0 = <&msp0_default_mode>; -- cgit v1.2.3 From 60b89f1928af80b546b5c3fd8714a62f6f4b8844 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 14 Mar 2017 09:38:04 +0100 Subject: ARM: at91: pm: cpu_idle: switch DDR to power-down mode On some DDR controllers, compatible with the sama5d3 one, the sequence to enter/exit/re-enter the self-refresh mode adds more constrains than what is currently written in the at91_idle driver. An actual access to the DDR chip is needed between exit and re-enter of this mode which is somehow difficult to implement. This sequence can completely hang the SoC. It is particularly experienced on parts which embed a L2 cache if the code run between IDLE calls fits in it... Moreover, as the intention is to enter and exit pretty rapidly from IDLE, the power-down mode is a good candidate. So now we use power-down instead of self-refresh. As we can simplify the code for sama5d3 compatible DDR controllers, we instantiate a new sama5d3_ddr_standby() function. Signed-off-by: Nicolas Ferre Cc: # v4.1+ Fixes: 017b5522d5e3 ("ARM: at91: Add new binding for sama5d3-ddramc") Signed-off-by: Alexandre Belloni --- arch/arm/mach-at91/pm.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 3d89b7905bd9..a277981f414d 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -289,6 +289,22 @@ static void at91_ddr_standby(void) at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); } +static void sama5d3_ddr_standby(void) +{ + u32 lpr0; + u32 saved_lpr0; + + saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR); + lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB; + lpr0 |= AT91_DDRSDRC_LPCB_POWER_DOWN; + + at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0); + + cpu_do_idle(); + + at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); +} + /* We manage both DDRAM/SDRAM controllers, we need more than one value to * remember. */ @@ -323,7 +339,7 @@ static const struct of_device_id const ramc_ids[] __initconst = { { .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby }, { .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby }, { .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby }, - { .compatible = "atmel,sama5d3-ddramc", .data = at91_ddr_standby }, + { .compatible = "atmel,sama5d3-ddramc", .data = sama5d3_ddr_standby }, { /*sentinel*/ } }; -- cgit v1.2.3 From acfa28b3649ec07775efaac0c00de2db39d71634 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Wed, 1 Mar 2017 18:02:28 -0500 Subject: ARM: dts: NSP: GPIO reboot open-source The libgpio code pre-sets the GPIO values for the gpio-reset in the device tree. This results in the device being reset during bringup. To prevent this pre-setting, use the "open-source" flag in the device tree. Signed-off-by: Jon Mason Fixes: b1aaf88 ("ARM: dts: NSP: Add GPIO reboot method to bcm958625hr DTS file") Fixes: 10baed1 ("ARM: dts: NSP: Add GPIO reboot method to bcm958625xmc DTS file") Fixes: 088e3148 ("ARM: dts: NSP: Add new DT file for bcm958522er") Fixes: e3227c1 ("ARM: dts: NSP: Add new DT file for bcm958525er") Fixes: 2f8bc00 ("ARM: dts: NSP: Add new DT file for bcm958622hr") Fixes: d454c37 ("ARM: dts: NSP: Add new DT file for bcm958623hr") Fixes: f27eacf ("ARM: dts: NSP: Add new DT file for bcm988312hr") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm958522er.dts | 1 + arch/arm/boot/dts/bcm958525er.dts | 1 + arch/arm/boot/dts/bcm958525xmc.dts | 1 + arch/arm/boot/dts/bcm958622hr.dts | 1 + arch/arm/boot/dts/bcm958623hr.dts | 1 + arch/arm/boot/dts/bcm958625hr.dts | 1 + arch/arm/boot/dts/bcm988312hr.dts | 1 + 7 files changed, 7 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index 3f04a40eb90c..df05e7f568af 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index 9fd542200d3d..4a3ab19c6281 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index 41e7fd350fcd..81f78435d8c7 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 31 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index 477c4860db52..c88b8fefcb2f 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index c0a499d5ba44..d503fa0dde31 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index f7eb5854a224..cc0363b843c1 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index 16666324fda8..74e15a3cd9f8 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; -- cgit v1.2.3 From 0cdefd5b5485ee6eb3512a75739d09a4090176ed Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sat, 18 Mar 2017 21:53:20 -0700 Subject: ARM: dts: sun7i: lamobo-r1: Fix CPU port RGMII settings The CPU port of the BCM53125 is configured with RGMII (no delays) but this should actually be RGMII with transmit delay (rgmii-txid) because STMMAC takes care of inserting the transmitter delay. This fixes occasional packet loss encountered. Fixes: d7b9eaff5f0c ("ARM: dts: sun7i: Add BCM53125 switch nodes to the lamobo-r1 board") Reported-by: Hartmut Knaack Signed-off-by: Florian Fainelli Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index 72ec0d5ae052..bbf1c8cbaac6 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -167,7 +167,7 @@ reg = <8>; label = "cpu"; ethernet = <&gmac>; - phy-mode = "rgmii"; + phy-mode = "rgmii-txid"; fixed-link { speed = <1000>; full-duplex; -- cgit v1.2.3 From 9693219aa61dc7a75ac015e5c011e889cb821eec Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Sat, 18 Mar 2017 05:23:15 +0800 Subject: ARM: sun8i: a23/a33: drop bl_en_pin GPIO pinmux in reference design DTSI The bl_en_pin GPIO pinmux is configured as "gpio_in", which makes it conflicts with the real GPIO usage (out), and makes the backlight not usable. Drop the GPIO pinmux for it, thus this GPIO can be correctly used. Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi index 7097c18ff487..d6bd15898db6 100644 --- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi @@ -50,8 +50,6 @@ backlight: backlight { compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin>; pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; @@ -93,11 +91,6 @@ }; &pio { - bl_en_pin: bl_en_pin@0 { - pins = "PH6"; - function = "gpio_in"; - }; - mmc0_cd_pin: mmc0_cd_pin@0 { pins = "PB4"; function = "gpio_in"; -- cgit v1.2.3