From e69edc7939abda1f696c482faa8168d80420f75c Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 5 Jul 2010 15:56:50 +0200 Subject: ARM: Auto calculate ZRELADDR and provide option for exceptions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As long as the zImage is placed within the 128MB range from the start of memory, ZRELADDR (Address where the decompressed kernel will be placed, usually == PHYS_OFFSET + TEXT_OFFSET) can be determined at run-time by masking PC with 0xf80000000. Running through all the Makefile.boot, all those zreladdr-y addresses == 0x[0-f][08]00_0000 + TEXT_OFFSET can be determined at run-time. Option CONFIG_AUTO_ZRELADDR and CONFIG_ZRELADDR are introduced, CONFIG_ZRELADDR _must_ be explicitly specified if: - ((zreladdr-y - TEXT_OFFSET) & ~0xf8000000) != 0, which means masking PC with 0xf8000000 will result in an incorrect address. Currently this is only a problem on u300. - or the assumption of the zImage being loaded by the bootloader within the first 128MB of RAM is incorrect - or when ZBOOT_ROM is used, where the above assumption is usually wrong. [ukleinek: changed mask from 0xf0000000 to 0xf8000000 for mx1 and shark + some review fixes from the mailing list] Original-Idea-and-Signed-off-by: Nicolas Pitre Signed-off-by: Eric Miao Signed-off-by: Uwe Kleine-König --- arch/arm/Kconfig | 99 +++++++++++++++++++++++++++++++++++++++ arch/arm/boot/Makefile | 8 ++-- arch/arm/boot/compressed/Makefile | 3 +- arch/arm/boot/compressed/head.S | 12 +++-- 4 files changed, 112 insertions(+), 10 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a53ac6570b66..0b0cf0d2872f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1490,6 +1490,105 @@ config ATAGS_PROC Should the atags used to boot the kernel be exported in an "atags" file in procfs. Useful with kexec. +config AUTO_ZRELADDR + bool "Auto calculation of the decompressed kernel image address" + depends on !ZBOOT_ROM && !ARCH_U300 + help + ZRELADDR is the physical address where the decompressed kernel + image will be placed. If AUTO_ZRELADDR is selected, the address + will be determined at run-time by masking the current IP with + 0xf8000000. This assumes the zImage being placed in the first 128MB + from start of memory. + +config ZRELADDR + hex "Physical address of the decompressed kernel image" + depends on !AUTO_ZRELADDR + default 0x00008000 if ARCH_BCMRING ||\ + ARCH_CNS3XXX ||\ + ARCH_DOVE ||\ + ARCH_EBSA110 ||\ + ARCH_FOOTBRIDGE ||\ + ARCH_INTEGRATOR ||\ + ARCH_IOP13XX ||\ + ARCH_IOP33X ||\ + ARCH_IXP2000 ||\ + ARCH_IXP23XX ||\ + ARCH_IXP4XX ||\ + ARCH_KIRKWOOD ||\ + ARCH_KS8695 ||\ + ARCH_LOKI ||\ + ARCH_MMP ||\ + ARCH_MV78XX0 ||\ + ARCH_NOMADIK ||\ + ARCH_NUC93X ||\ + ARCH_NS9XXX ||\ + ARCH_ORION5X ||\ + ARCH_SPEAR3XX ||\ + ARCH_SPEAR6XX ||\ + ARCH_U8500 ||\ + ARCH_VERSATILE ||\ + ARCH_W90X900 + default 0x08008000 if ARCH_MX1 ||\ + ARCH_SHARK + default 0x10008000 if ARCH_MSM ||\ + ARCH_OMAP1 ||\ + ARCH_RPC + default 0x20008000 if ARCH_S5P6440 ||\ + ARCH_S5P6442 ||\ + ARCH_S5PC100 ||\ + ARCH_S5PV210 + default 0x30008000 if ARCH_S3C2410 ||\ + ARCH_S3C2400 ||\ + ARCH_S3C2412 ||\ + ARCH_S3C2416 ||\ + ARCH_S3C2440 ||\ + ARCH_S3C2443 + default 0x40008000 if ARCH_STMP378X ||\ + ARCH_STMP37XX ||\ + ARCH_SH7372 ||\ + ARCH_SH7377 + default 0x50008000 if ARCH_S3C64XX ||\ + ARCH_SH7367 + default 0x60008000 if ARCH_VEXPRESS + default 0x80008000 if ARCH_MX25 ||\ + ARCH_MX3 ||\ + ARCH_NETX ||\ + ARCH_OMAP2PLUS ||\ + ARCH_PNX4008 + default 0x90008000 if ARCH_MX5 ||\ + ARCH_MX91231 + default 0xa0008000 if ARCH_IOP32X ||\ + ARCH_PXA ||\ + MACH_MX27 + default 0xc0008000 if ARCH_LH7A40X ||\ + MACH_MX21 + default 0xf0008000 if ARCH_AAEC2000 ||\ + ARCH_L7200 + default 0xc0028000 if ARCH_CLPS711X + default 0x70008000 if ARCH_AT91 && (ARCH_AT91CAP9 || ARCH_AT91SAM9G45) + default 0x20008000 if ARCH_AT91 && !(ARCH_AT91CAP9 || ARCH_AT91SAM9G45) + default 0xc0008000 if ARCH_DAVINCI && ARCH_DAVINCI_DA8XX + default 0x80008000 if ARCH_DAVINCI && !ARCH_DAVINCI_DA8XX + default 0x00008000 if ARCH_EP93XX && EP93XX_SDCE3_SYNC_PHYS_OFFSET + default 0xc0008000 if ARCH_EP93XX && EP93XX_SDCE0_PHYS_OFFSET + default 0xd0008000 if ARCH_EP93XX && EP93XX_SDCE1_PHYS_OFFSET + default 0xe0008000 if ARCH_EP93XX && EP93XX_SDCE2_PHYS_OFFSET + default 0xf0008000 if ARCH_EP93XX && EP93XX_SDCE3_ASYNC_PHYS_OFFSET + default 0x00008000 if ARCH_GEMINI && GEMINI_MEM_SWAP + default 0x10008000 if ARCH_GEMINI && !GEMINI_MEM_SWAP + default 0x70008000 if ARCH_REALVIEW && REALVIEW_HIGH_PHYS_OFFSET + default 0x00008000 if ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET + default 0xc0208000 if ARCH_SA1100 && SA1111 + default 0xc0008000 if ARCH_SA1100 && !SA1111 + default 0x30108000 if ARCH_S3C2410 && PM_H1940 + default 0x28E08000 if ARCH_U300 && MACH_U300_SINGLE_RAM + default 0x48008000 if ARCH_U300 && !MACH_U300_SINGLE_RAM + help + ZRELADDR is the physical address where the decompressed kernel + image will be placed. ZRELADDR has to be specified when the + assumption of AUTO_ZRELADDR is not valid, or when ZBOOT_ROM is + selected. + endmenu menu "CPU Power Management" diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 4a590f4113e2..f705213caa88 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -14,18 +14,16 @@ MKIMAGE := $(srctree)/scripts/mkuboot.sh ifneq ($(MACHINE),) -include $(srctree)/$(MACHINE)/Makefile.boot +-include $(srctree)/$(MACHINE)/Makefile.boot endif # Note: the following conditions must always be true: -# ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) # PARAMS_PHYS must be within 4MB of ZRELADDR # INITRD_PHYS must be in RAM -ZRELADDR := $(zreladdr-y) PARAMS_PHYS := $(params_phys-y) INITRD_PHYS := $(initrd_phys-y) -export ZRELADDR INITRD_PHYS PARAMS_PHYS +export INITRD_PHYS PARAMS_PHYS targets := Image zImage xipImage bootpImage uImage @@ -67,7 +65,7 @@ quiet_cmd_uimage = UIMAGE $@ ifeq ($(CONFIG_ZBOOT_ROM),y) $(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT) else -$(obj)/uImage: LOADADDR=$(ZRELADDR) +$(obj)/uImage: LOADADDR=$(CONFIG_ZRELADDR) endif ifeq ($(CONFIG_THUMB2_KERNEL),y) diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 2a80c9de6eaf..cc8380b879fe 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -4,6 +4,7 @@ # create a compressed vmlinuz image from the original vmlinux # +AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET) HEAD = head.o OBJS = misc.o decompress.o FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c @@ -79,8 +80,6 @@ endif EXTRA_CFLAGS := -fpic -fno-builtin EXTRA_AFLAGS := -Wa,-march=all -# Supply ZRELADDR to the decompressor via a linker symbol. -LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR) ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 endif diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index d27faa131796..abf4d65acf62 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -170,9 +170,16 @@ not_angel: .text adr r0, LC0 - ARM( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp}) - THUMB( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip} ) + ARM( ldmia r0, {r1, r2, r3, r5, r6, r11, ip, sp}) + THUMB( ldmia r0, {r1, r2, r3, r5, r6, r11, ip} ) THUMB( ldr sp, [r0, #32] ) +#ifdef CONFIG_AUTO_ZRELADDR + @ determine final kernel image address + and r4, pc, #0xf8000000 + add r4, r4, #TEXT_OFFSET +#else + ldr r4, =CONFIG_ZRELADDR +#endif subs r0, r0, r1 @ calculate the delta offset @ if delta is zero, we are @@ -310,7 +317,6 @@ wont_overwrite: mov r0, r4 LC0: .word LC0 @ r1 .word __bss_start @ r2 .word _end @ r3 - .word zreladdr @ r4 .word _start @ r5 .word _image_size @ r6 .word _got_start @ r11 -- cgit v1.2.3