From 2f7d63f909900c555baf36a4c6a11e9bf8e1af18 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 26 May 2011 04:03:10 -0400 Subject: Blackfin: boards: clean up redundant/dead spi resources The default for the Blackfin SPI driver is 8 bits and dma disabled, so many of the bfin5xx_spi_chip resources are redundant. So punt those parts. Further, drivers should themselves be declaring 16 bit transfers, so for those that do, and for the ones which no longer do 16 bit transfers, drop the bfin5xx_spi_chip resources. Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf561/boards/ezkit.c | 17 ----------------- 1 file changed, 17 deletions(-) (limited to 'arch/blackfin/mach-bf561/boards/ezkit.c') diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index ba8149858714..9490dc800ca5 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -286,21 +286,6 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { @@ -348,7 +333,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .bus_num = 0, .chip_select = 4, .platform_data = "ad1836", /* only includes chip name for the moment */ - .controller_data = &ad1836_spi_chip_info, .mode = SPI_MODE_3, }, #endif @@ -358,7 +342,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spidev_chip_info, }, #endif }; -- cgit v1.2.3