From d57bc0feaa958bc8a6a0b9d3a29f78c699e50d2a Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Tue, 23 Nov 2010 10:00:15 +0000 Subject: Blackfin: bf518f-ezbrd: fix dsa resources On bf518-ezbrd with DSA Ethernet switch enabled, on chip MAC is connecting to phy at address 3. If allowing the netdevice framework to probe both 3 phys of the switch when registering MAC phy, phy at address 1 is checked for link active status other than phy at address 3. If connecting a cable to port 2 and leave port 1 open, link status in phy 2 and 3 are online, while that in phy 1 is offline. So, the phy layer sets wrong offline status to net device on port 3. In this case, no data can be transferred via ethernet port 2. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf518/boards/ezbrd.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'arch/blackfin') diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index 0c75aa35faf4..8d55a8dad7ab 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -104,24 +104,23 @@ static const unsigned short bfin_mac_peripherals[] = { static struct bfin_phydev_platform_data bfin_phydev_data[] = { { - .addr = 1, - .irq = IRQ_MAC_PHYINT, - }, - { - .addr = 2, - .irq = IRQ_MAC_PHYINT, - }, - { +#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) .addr = 3, +#else + .addr = 1, +#endif .irq = IRQ_MAC_PHYINT, }, }; static struct bfin_mii_bus_platform_data bfin_mii_bus_data = { - .phydev_number = 3, + .phydev_number = 1, .phydev_data = bfin_phydev_data, .phy_mode = PHY_INTERFACE_MODE_MII, .mac_peripherals = bfin_mac_peripherals, +#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) + .phy_mask = 0xfff7, /* Only probe the port phy connect to the on chip MAC */ +#endif }; static struct platform_device bfin_mii_bus = { -- cgit v1.2.3