From 6f7a251a259e5bf58a9ff334bdcfa3e42b6cb7a3 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 6 Nov 2009 18:45:05 +0800 Subject: MIPS: Loongson: Add basic Loongson 2F support Loongson 2F has built-in DDR2 and PCI-X controller. The PCI-X controller has a programming interface similiar to the the FPGA northbridge used on Loongson 2E. The main differences between Loongson 2E and Loongson 2F include: 1. Loongson 2F has an extra address window configuration module, which is used to map CPU address space to DDR or PCI address space, or map the PCI-DMA address space to DDR or LIO address space. 2. Loongson 2F supports 8 levels of software configurable CPu frequency which can be configured in the LOONGSON_CHIPCFG0 register. The coming cpufreq and standby support are based on this feature. Loongson.h abstracts the modules and corresponding methods are abstracted. Add other Loongson-2F-specific source code including gcc 4.4 support, PCI memory space, PCI IO space, DMA address. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/mips/Makefile') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index ba04782c4b91..47ecded20902 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -125,6 +125,8 @@ cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap cflags-$(CONFIG_CPU_LOONGSON2) += -Wa,--trap cflags-$(CONFIG_CPU_LOONGSON2E) += \ $(call cc-option,-march=loongson2e,-march=r4600) +cflags-$(CONFIG_CPU_LOONGSON2F) += \ + $(call cc-option,-march=loongson2f,-march=r4600) cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ -Wa,-mips32 -Wa,--trap -- cgit v1.2.3