From 2b6509f42dc6c96ef0b625888d4aa56d2e140330 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Fri, 27 Sep 2019 18:27:42 +0800 Subject: MIPS: Loongson64: Fix boot failure after dropping boot_mem_map From commit a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") onwards, add_memory_region() is handled by memblock_add()/memblock_reserve() directly and all bootmem API should be converted to memblock API. Otherwise it will lead to boot failure, especially in the NUMA case because add_memory_region lose the node_id information. Fixes: a94e4f24ec836c8984f83959 ("MIPS: init: Drop boot_mem_map") Signed-off-by: Huacai Chen Signed-off-by: Jiaxun Yang [paul.burton@mips.com: - Invert node_id check to de-indent the switch statement & avoid lines over 80 characters. - Fixup commit reference in commit message.] Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-mips@vger.kernel.org Cc: Fuxin Zhang Cc: Zhangjin Wu Cc: Huacai Chen --- arch/mips/loongson64/common/mem.c | 35 +++++++++++++++++----------------- arch/mips/loongson64/loongson-3/numa.c | 11 +---------- 2 files changed, 18 insertions(+), 28 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/loongson64/common/mem.c b/arch/mips/loongson64/common/mem.c index 4abb92e0fc39..4254ac4ec616 100644 --- a/arch/mips/loongson64/common/mem.c +++ b/arch/mips/loongson64/common/mem.c @@ -3,6 +3,7 @@ */ #include #include +#include #include #include @@ -64,24 +65,22 @@ void __init prom_init_memory(void) node_id = loongson_memmap->map[i].node_id; mem_type = loongson_memmap->map[i].mem_type; - if (node_id == 0) { - switch (mem_type) { - case SYSTEM_RAM_LOW: - add_memory_region(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20, - BOOT_MEM_RAM); - break; - case SYSTEM_RAM_HIGH: - add_memory_region(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20, - BOOT_MEM_RAM); - break; - case SYSTEM_RAM_RESERVED: - add_memory_region(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20, - BOOT_MEM_RESERVED); - break; - } + if (node_id != 0) + continue; + + switch (mem_type) { + case SYSTEM_RAM_LOW: + memblock_add(loongson_memmap->map[i].mem_start, + (u64)loongson_memmap->map[i].mem_size << 20); + break; + case SYSTEM_RAM_HIGH: + memblock_add(loongson_memmap->map[i].mem_start, + (u64)loongson_memmap->map[i].mem_size << 20); + break; + case SYSTEM_RAM_RESERVED: + memblock_reserve(loongson_memmap->map[i].mem_start, + (u64)loongson_memmap->map[i].mem_size << 20); + break; } } } diff --git a/arch/mips/loongson64/loongson-3/numa.c b/arch/mips/loongson64/loongson-3/numa.c index 414e97de5dc0..8f20d2cb3767 100644 --- a/arch/mips/loongson64/loongson-3/numa.c +++ b/arch/mips/loongson64/loongson-3/numa.c @@ -142,8 +142,6 @@ static void __init szmem(unsigned int node) (u32)node_id, mem_type, mem_start, mem_size); pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n", start_pfn, end_pfn, num_physpages); - add_memory_region((node_id << 44) + mem_start, - (u64)mem_size << 20, BOOT_MEM_RAM); memblock_add_node(PFN_PHYS(start_pfn), PFN_PHYS(end_pfn - start_pfn), node); break; @@ -156,16 +154,12 @@ static void __init szmem(unsigned int node) (u32)node_id, mem_type, mem_start, mem_size); pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n", start_pfn, end_pfn, num_physpages); - add_memory_region((node_id << 44) + mem_start, - (u64)mem_size << 20, BOOT_MEM_RAM); memblock_add_node(PFN_PHYS(start_pfn), PFN_PHYS(end_pfn - start_pfn), node); break; case SYSTEM_RAM_RESERVED: pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n", (u32)node_id, mem_type, mem_start, mem_size); - add_memory_region((node_id << 44) + mem_start, - (u64)mem_size << 20, BOOT_MEM_RESERVED); memblock_reserve(((node_id << 44) + mem_start), mem_size << 20); break; @@ -191,8 +185,6 @@ static void __init node_mem_init(unsigned int node) NODE_DATA(node)->node_start_pfn = start_pfn; NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn; - free_bootmem_with_active_regions(node, end_pfn); - if (node == 0) { /* kernel end address */ unsigned long kernel_end_pfn = PFN_UP(__pa_symbol(&_end)); @@ -209,8 +201,6 @@ static void __init node_mem_init(unsigned int node) memblock_reserve((node_addrspace_offset | 0xfe000000), 32 << 20); } - - sparse_memory_present_with_active_regions(node); } static __init void prom_meminit(void) @@ -227,6 +217,7 @@ static __init void prom_meminit(void) cpumask_clear(&__node_data[(node)]->cpumask); } } + memblocks_present(); max_low_pfn = PHYS_PFN(memblock_end_of_DRAM()); for (cpu = 0; cpu < loongson_sysconf.nr_cpus; cpu++) { -- cgit v1.2.3 From 0889d07f3e4b171c453b2aaf2b257f9074cdf624 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Mon, 30 Sep 2019 11:39:52 +0200 Subject: MIPS: dts: ar9331: fix interrupt-controller size It is two registers each of 4 byte. Signed-off-by: Oleksij Rempel Signed-off-by: Paul Burton Cc: Rob Herring Cc: Mark Rutland Cc: Pengutronix Kernel Team Cc: Ralf Baechle Cc: James Hogan Cc: devicetree@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org --- arch/mips/boot/dts/qca/ar9331.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi index 63a9f33aa43e..5cfc9d347826 100644 --- a/arch/mips/boot/dts/qca/ar9331.dtsi +++ b/arch/mips/boot/dts/qca/ar9331.dtsi @@ -99,7 +99,7 @@ miscintc: interrupt-controller@18060010 { compatible = "qca,ar7240-misc-intc"; - reg = <0x18060010 0x4>; + reg = <0x18060010 0x8>; interrupt-parent = <&cpuintc>; interrupts = <6>; -- cgit v1.2.3 From d345d9cad22532ac18afa70efa0506b1d8cface5 Mon Sep 17 00:00:00 2001 From: Jiaxun Yang Date: Fri, 27 Sep 2019 13:33:39 +0800 Subject: MIPS: cpu-bugs64: Mark inline functions as __always_inline Commit ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") allows compiler to uninline functions marked as 'inline'. Leading to section mismatch in this case. Since we're using const variables to pass assembly flags, 'inline's can't be dropped. So we simply mark them as __always_inline. Signed-off-by: Jiaxun Yang Cc: linux-mips@vger.kernel.org [paul.burton@mips.com: - Annotate these functions with __init, even if it only serves to inform human readers when the code can be used. - Drop the __always_inline from check_daddi() & check_daddiu() which don't use arguments as immediates in inline asm. - Rewrap the commit message.] Signed-off-by: Paul Burton --- arch/mips/kernel/cpu-bugs64.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c index fa62cd1dff93..6a7afe7ef4d3 100644 --- a/arch/mips/kernel/cpu-bugs64.c +++ b/arch/mips/kernel/cpu-bugs64.c @@ -24,7 +24,8 @@ static char r4kwar[] __initdata = static char daddiwar[] __initdata = "Enable CPU_DADDI_WORKAROUNDS to rectify."; -static inline void align_mod(const int align, const int mod) +static __always_inline __init +void align_mod(const int align, const int mod) { asm volatile( ".set push\n\t" @@ -38,8 +39,9 @@ static inline void align_mod(const int align, const int mod) : "n"(align), "n"(mod)); } -static __always_inline void mult_sh_align_mod(long *v1, long *v2, long *w, - const int align, const int mod) +static __always_inline __init +void mult_sh_align_mod(long *v1, long *v2, long *w, + const int align, const int mod) { unsigned long flags; int m1, m2; @@ -113,7 +115,7 @@ static __always_inline void mult_sh_align_mod(long *v1, long *v2, long *w, *w = lw; } -static inline void check_mult_sh(void) +static __always_inline __init void check_mult_sh(void) { long v1[8], v2[8], w[8]; int bug, fix, i; @@ -176,7 +178,7 @@ asmlinkage void __init do_daddi_ov(struct pt_regs *regs) exception_exit(prev_state); } -static inline void check_daddi(void) +static __init void check_daddi(void) { extern asmlinkage void handle_daddi_ov(void); unsigned long flags; @@ -242,7 +244,7 @@ static inline void check_daddi(void) int daddiu_bug = IS_ENABLED(CONFIG_CPU_MIPSR6) ? 0 : -1; -static inline void check_daddiu(void) +static __init void check_daddiu(void) { long v, w, tmp; -- cgit v1.2.3 From 0228ecf6128c92b47eadd2ac270c5574d9150c09 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Tue, 1 Oct 2019 21:56:37 +0000 Subject: MIPS: octeon: Include required header; fix octeon ethernet build Commit 171a9bae68c7 ("staging/octeon: Allow test build on !MIPS") moved the inclusion of a bunch of headers by various files in the Octeon ethernet driver into a common header, but in doing so it changed the order in which those headers are included. Prior to the referenced commit drivers/staging/octeon/ethernet.c included asm/octeon/cvmx-pip.h before asm/octeon/cvmx-ipd.h, which makes use of the CVMX_PIP_SFT_RST definition pulled in by the former. After commit 171a9bae68c7 ("staging/octeon: Allow test build on !MIPS") we pull in asm/octeon/cvmx-ipd.h first & builds fail with: In file included from drivers/staging/octeon/octeon-ethernet.h:27, from drivers/staging/octeon/ethernet.c:22: arch/mips/include/asm/octeon/cvmx-ipd.h: In function 'cvmx_ipd_free_ptr': arch/mips/include/asm/octeon/cvmx-ipd.h:330:27: error: storage size of 'pip_sft_rst' isn't known union cvmx_pip_sft_rst pip_sft_rst; ^~~~~~~~~~~ arch/mips/include/asm/octeon/cvmx-ipd.h:331:36: error: 'CVMX_PIP_SFT_RST' undeclared (first use in this function); did you mean 'CVMX_CIU_SOFT_RST'? pip_sft_rst.u64 = cvmx_read_csr(CVMX_PIP_SFT_RST); ^~~~~~~~~~~~~~~~ CVMX_CIU_SOFT_RST arch/mips/include/asm/octeon/cvmx-ipd.h:331:36: note: each undeclared identifier is reported only once for each function it appears in arch/mips/include/asm/octeon/cvmx-ipd.h:330:27: warning: unused variable 'pip_sft_rst' [-Wunused-variable] union cvmx_pip_sft_rst pip_sft_rst; ^~~~~~~~~~~ make[4]: *** [scripts/Makefile.build:266: drivers/staging/octeon/ethernet.o] Error 1 make[3]: *** [scripts/Makefile.build:509: drivers/staging/octeon] Error 2 Fix this by having asm/octeon/cvmx-ipd.h include the asm/octeon/cvmx-pip-defs.h header that it is reliant upon, rather than requiring its users to pull in that header before it. Signed-off-by: Paul Burton Fixes: 171a9bae68c7 ("staging/octeon: Allow test build on !MIPS") Cc: David S. Miller Cc: Greg Kroah-Hartman Cc: Matthew Wilcox (Oracle) Cc: linux-mips@vger.kernel.org Cc: David S . Miller Cc: Matthew Wilcox --- arch/mips/include/asm/octeon/cvmx-ipd.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/octeon/cvmx-ipd.h b/arch/mips/include/asm/octeon/cvmx-ipd.h index cbdc14b77435..adab7b54c3b4 100644 --- a/arch/mips/include/asm/octeon/cvmx-ipd.h +++ b/arch/mips/include/asm/octeon/cvmx-ipd.h @@ -36,6 +36,7 @@ #include #include +#include enum cvmx_ipd_mode { CVMX_IPD_OPC_MODE_STT = 0LL, /* All blocks DRAM, not cached in L2 */ -- cgit v1.2.3 From 0671c5b84e9e0a6d42d22da9b5d093787ac1c5f3 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Wed, 2 Oct 2019 18:59:49 +0000 Subject: MIPS: Wire up clone3 syscall Wire up the new clone3 syscall for MIPS, using save_static_function() to generate a wrapper that saves registers $s0-$s7 prior to invoking the generic sys_clone3 function just like we do for plain old clone. Tested atop 64r6el_defconfig using o32, n32 & n64 builds of the simple test program from: https://lore.kernel.org/lkml/20190716130631.tohj4ub54md25dys@brauner.io/ Signed-off-by: Paul Burton Cc: Christian Brauner Acked-by: Christian Brauner Cc: linux-mips@vger.kernel.org --- arch/mips/include/asm/unistd.h | 1 + arch/mips/kernel/syscall.c | 1 + arch/mips/kernel/syscalls/syscall_n32.tbl | 2 +- arch/mips/kernel/syscalls/syscall_n64.tbl | 2 +- arch/mips/kernel/syscalls/syscall_o32.tbl | 2 +- 5 files changed, 5 insertions(+), 3 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h index 071053ece677..5d70babfc9ee 100644 --- a/arch/mips/include/asm/unistd.h +++ b/arch/mips/include/asm/unistd.h @@ -52,6 +52,7 @@ # endif #define __ARCH_WANT_SYS_FORK #define __ARCH_WANT_SYS_CLONE +#define __ARCH_WANT_SYS_CLONE3 /* whitelists for checksyscalls */ #define __IGNORE_fadvise64_64 diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index b0e25e913bdb..3f16f3823031 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -80,6 +80,7 @@ SYSCALL_DEFINE6(mips_mmap2, unsigned long, addr, unsigned long, len, save_static_function(sys_fork); save_static_function(sys_clone); +save_static_function(sys_clone3); SYSCALL_DEFINE1(set_thread_area, unsigned long, addr) { diff --git a/arch/mips/kernel/syscalls/syscall_n32.tbl b/arch/mips/kernel/syscalls/syscall_n32.tbl index c9c879ec9b6d..e7c5ab38e403 100644 --- a/arch/mips/kernel/syscalls/syscall_n32.tbl +++ b/arch/mips/kernel/syscalls/syscall_n32.tbl @@ -373,4 +373,4 @@ 432 n32 fsmount sys_fsmount 433 n32 fspick sys_fspick 434 n32 pidfd_open sys_pidfd_open -# 435 reserved for clone3 +435 n32 clone3 __sys_clone3 diff --git a/arch/mips/kernel/syscalls/syscall_n64.tbl b/arch/mips/kernel/syscalls/syscall_n64.tbl index bbce9159caa1..13cd66581f3b 100644 --- a/arch/mips/kernel/syscalls/syscall_n64.tbl +++ b/arch/mips/kernel/syscalls/syscall_n64.tbl @@ -349,4 +349,4 @@ 432 n64 fsmount sys_fsmount 433 n64 fspick sys_fspick 434 n64 pidfd_open sys_pidfd_open -# 435 reserved for clone3 +435 n64 clone3 __sys_clone3 diff --git a/arch/mips/kernel/syscalls/syscall_o32.tbl b/arch/mips/kernel/syscalls/syscall_o32.tbl index 9653591428ec..353539ea4140 100644 --- a/arch/mips/kernel/syscalls/syscall_o32.tbl +++ b/arch/mips/kernel/syscalls/syscall_o32.tbl @@ -422,4 +422,4 @@ 432 o32 fsmount sys_fsmount 433 o32 fspick sys_fspick 434 o32 pidfd_open sys_pidfd_open -# 435 reserved for clone3 +435 o32 clone3 __sys_clone3 -- cgit v1.2.3 From 90800281e761247d8096ab213c10d638602655f9 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Wed, 2 Oct 2019 17:46:17 +0000 Subject: MIPS: VDSO: Remove unused gettimeofday.c arch/mips/vdso/gettimeofday.c has been unused since commit 24640f233b46 ("mips: Add support for generic vDSO"). Remove the dead code. Signed-off-by: Paul Burton Fixes: 24640f233b46 ("mips: Add support for generic vDSO") Cc: Vincenzo Frascino Cc: linux-mips@vger.kernel.org --- arch/mips/vdso/gettimeofday.c | 269 ------------------------------------------ 1 file changed, 269 deletions(-) delete mode 100644 arch/mips/vdso/gettimeofday.c (limited to 'arch/mips') diff --git a/arch/mips/vdso/gettimeofday.c b/arch/mips/vdso/gettimeofday.c deleted file mode 100644 index e8243c7fd5b5..000000000000 --- a/arch/mips/vdso/gettimeofday.c +++ /dev/null @@ -1,269 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2015 Imagination Technologies - * Author: Alex Smith - */ - -#include "vdso.h" - -#include -#include - -#include -#include -#include -#include - -#ifdef CONFIG_MIPS_CLOCK_VSYSCALL - -static __always_inline long gettimeofday_fallback(struct timeval *_tv, - struct timezone *_tz) -{ - register struct timezone *tz asm("a1") = _tz; - register struct timeval *tv asm("a0") = _tv; - register long ret asm("v0"); - register long nr asm("v0") = __NR_gettimeofday; - register long error asm("a3"); - - asm volatile( - " syscall\n" - : "=r" (ret), "=r" (error) - : "r" (tv), "r" (tz), "r" (nr) - : "$1", "$3", "$8", "$9", "$10", "$11", "$12", "$13", - "$14", "$15", "$24", "$25", "hi", "lo", "memory"); - - return error ? -ret : ret; -} - -#endif - -static __always_inline long clock_gettime_fallback(clockid_t _clkid, - struct timespec *_ts) -{ - register struct timespec *ts asm("a1") = _ts; - register clockid_t clkid asm("a0") = _clkid; - register long ret asm("v0"); - register long nr asm("v0") = __NR_clock_gettime; - register long error asm("a3"); - - asm volatile( - " syscall\n" - : "=r" (ret), "=r" (error) - : "r" (clkid), "r" (ts), "r" (nr) - : "$1", "$3", "$8", "$9", "$10", "$11", "$12", "$13", - "$14", "$15", "$24", "$25", "hi", "lo", "memory"); - - return error ? -ret : ret; -} - -static __always_inline int do_realtime_coarse(struct timespec *ts, - const union mips_vdso_data *data) -{ - u32 start_seq; - - do { - start_seq = vdso_data_read_begin(data); - - ts->tv_sec = data->xtime_sec; - ts->tv_nsec = data->xtime_nsec >> data->cs_shift; - } while (vdso_data_read_retry(data, start_seq)); - - return 0; -} - -static __always_inline int do_monotonic_coarse(struct timespec *ts, - const union mips_vdso_data *data) -{ - u32 start_seq; - u64 to_mono_sec; - u64 to_mono_nsec; - - do { - start_seq = vdso_data_read_begin(data); - - ts->tv_sec = data->xtime_sec; - ts->tv_nsec = data->xtime_nsec >> data->cs_shift; - - to_mono_sec = data->wall_to_mono_sec; - to_mono_nsec = data->wall_to_mono_nsec; - } while (vdso_data_read_retry(data, start_seq)); - - ts->tv_sec += to_mono_sec; - timespec_add_ns(ts, to_mono_nsec); - - return 0; -} - -#ifdef CONFIG_CSRC_R4K - -static __always_inline u64 read_r4k_count(void) -{ - unsigned int count; - - __asm__ __volatile__( - " .set push\n" - " .set mips32r2\n" - " rdhwr %0, $2\n" - " .set pop\n" - : "=r" (count)); - - return count; -} - -#endif - -#ifdef CONFIG_CLKSRC_MIPS_GIC - -static __always_inline u64 read_gic_count(const union mips_vdso_data *data) -{ - void __iomem *gic = get_gic(data); - u32 hi, hi2, lo; - - do { - hi = __raw_readl(gic + sizeof(lo)); - lo = __raw_readl(gic); - hi2 = __raw_readl(gic + sizeof(lo)); - } while (hi2 != hi); - - return (((u64)hi) << 32) + lo; -} - -#endif - -static __always_inline u64 get_ns(const union mips_vdso_data *data) -{ - u64 cycle_now, delta, nsec; - - switch (data->clock_mode) { -#ifdef CONFIG_CSRC_R4K - case VDSO_CLOCK_R4K: - cycle_now = read_r4k_count(); - break; -#endif -#ifdef CONFIG_CLKSRC_MIPS_GIC - case VDSO_CLOCK_GIC: - cycle_now = read_gic_count(data); - break; -#endif - default: - return 0; - } - - delta = (cycle_now - data->cs_cycle_last) & data->cs_mask; - - nsec = (delta * data->cs_mult) + data->xtime_nsec; - nsec >>= data->cs_shift; - - return nsec; -} - -static __always_inline int do_realtime(struct timespec *ts, - const union mips_vdso_data *data) -{ - u32 start_seq; - u64 ns; - - do { - start_seq = vdso_data_read_begin(data); - - if (data->clock_mode == VDSO_CLOCK_NONE) - return -ENOSYS; - - ts->tv_sec = data->xtime_sec; - ns = get_ns(data); - } while (vdso_data_read_retry(data, start_seq)); - - ts->tv_nsec = 0; - timespec_add_ns(ts, ns); - - return 0; -} - -static __always_inline int do_monotonic(struct timespec *ts, - const union mips_vdso_data *data) -{ - u32 start_seq; - u64 ns; - u64 to_mono_sec; - u64 to_mono_nsec; - - do { - start_seq = vdso_data_read_begin(data); - - if (data->clock_mode == VDSO_CLOCK_NONE) - return -ENOSYS; - - ts->tv_sec = data->xtime_sec; - ns = get_ns(data); - - to_mono_sec = data->wall_to_mono_sec; - to_mono_nsec = data->wall_to_mono_nsec; - } while (vdso_data_read_retry(data, start_seq)); - - ts->tv_sec += to_mono_sec; - ts->tv_nsec = 0; - timespec_add_ns(ts, ns + to_mono_nsec); - - return 0; -} - -#ifdef CONFIG_MIPS_CLOCK_VSYSCALL - -/* - * This is behind the ifdef so that we don't provide the symbol when there's no - * possibility of there being a usable clocksource, because there's nothing we - * can do without it. When libc fails the symbol lookup it should fall back on - * the standard syscall path. - */ -int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) -{ - const union mips_vdso_data *data = get_vdso_data(); - struct timespec ts; - int ret; - - ret = do_realtime(&ts, data); - if (ret) - return gettimeofday_fallback(tv, tz); - - if (tv) { - tv->tv_sec = ts.tv_sec; - tv->tv_usec = ts.tv_nsec / 1000; - } - - if (tz) { - tz->tz_minuteswest = data->tz_minuteswest; - tz->tz_dsttime = data->tz_dsttime; - } - - return 0; -} - -#endif /* CONFIG_MIPS_CLOCK_VSYSCALL */ - -int __vdso_clock_gettime(clockid_t clkid, struct timespec *ts) -{ - const union mips_vdso_data *data = get_vdso_data(); - int ret = -1; - - switch (clkid) { - case CLOCK_REALTIME_COARSE: - ret = do_realtime_coarse(ts, data); - break; - case CLOCK_MONOTONIC_COARSE: - ret = do_monotonic_coarse(ts, data); - break; - case CLOCK_REALTIME: - ret = do_realtime(ts, data); - break; - case CLOCK_MONOTONIC: - ret = do_monotonic(ts, data); - break; - default: - break; - } - - if (ret) - ret = clock_gettime_fallback(clkid, ts); - - return ret; -} -- cgit v1.2.3 From 8919975b617197ebe39290d379caa02caf6bf3e3 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Wed, 2 Oct 2019 17:46:36 +0000 Subject: MIPS: VDSO: Fix build for binutils < 2.25 Versions of binutils prior to 2.25 are unable to link our VDSO due to an unsupported R_MIPS_PC32 relocation generated by the ".word _start - ." line of the inline asm in get_vdso_base(). As such, the intent is that when building with binutils older than 2.25 we don't build code for gettimeofday() & friends in the VDSO that rely upon get_vdso_base(). Commit 24640f233b46 ("mips: Add support for generic vDSO") converted us to using generic VDSO infrastructure, and as part of that the gettimeofday() functionality moved to a new vgettimeofday.c file. The check for binutils < 2.25 wasn't updated to handle this new filename, and so it continues trying to remove the old unused filename from the build. The end result is that we try to include the gettimeofday() code in builds that will fail to link. Fix this by updating the binutils < 2.25 case to remove vgettimeofday.c from obj-vdso-y, rather than gettimeofday.c. Signed-off-by: Paul Burton Fixes: 24640f233b46 ("mips: Add support for generic vDSO") Cc: Vincenzo Frascino Cc: linux-mips@vger.kernel.org --- arch/mips/vdso/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile index 69cfa0a5339e..807f0f782f75 100644 --- a/arch/mips/vdso/Makefile +++ b/arch/mips/vdso/Makefile @@ -59,7 +59,7 @@ CFLAGS_REMOVE_vgettimeofday.o = -pg ifndef CONFIG_CPU_MIPSR6 ifeq ($(call ld-ifversion, -lt, 225000000, y),y) $(warning MIPS VDSO requires binutils >= 2.25) - obj-vdso-y := $(filter-out gettimeofday.o, $(obj-vdso-y)) + obj-vdso-y := $(filter-out vgettimeofday.o, $(obj-vdso-y)) ccflags-vdso += -DDISABLE_MIPS_VDSO endif endif -- cgit v1.2.3 From 66b416ee41ed7a8216e5234a96288dbb8124e4b6 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 24 Sep 2019 17:19:56 +0200 Subject: MIPS: init: Fix reservation of memory between PHYS_OFFSET and mem start Fix calculation of the size for reserving memory between PHYS_OFFSET and real memory start. Fixes: a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") Signed-off-by: Thomas Bogendoerfer Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org --- arch/mips/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index b8249c233754..f5c6b4c6de24 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -321,7 +321,7 @@ static void __init bootmem_init(void) * Reserve any memory between the start of RAM and PHYS_OFFSET */ if (ramstart > PHYS_OFFSET) - memblock_reserve(PHYS_OFFSET, PFN_UP(ramstart) - PHYS_OFFSET); + memblock_reserve(PHYS_OFFSET, ramstart - PHYS_OFFSET); if (PFN_UP(ramstart) > ARCH_PFN_OFFSET) { pr_info("Wasting %lu bytes for tracking %lu unused pages\n", -- cgit v1.2.3 From bd848d1b9235d027e65fcc87de26cc1b02b41cc8 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 24 Sep 2019 17:20:51 +0200 Subject: MIPS: init: Prevent adding memory before PHYS_OFFSET On some SGI machines (IP28 and IP30) a small region of memory is mirrored to pyhsical address 0 for exception vectors while rest of the memory is reachable at a higher physical address. ARC PROM marks this region as reserved, but with commit a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") this chunk is used, when searching for start of ram, which breaks at least IP28 and IP30 machines. To fix this add_region_memory() checks for start address < PHYS_OFFSET and ignores these chunks. Fixes: a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") Signed-off-by: Thomas Bogendoerfer Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org --- arch/mips/kernel/setup.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index f5c6b4c6de24..5eec13b8d222 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -108,6 +108,9 @@ void __init add_memory_region(phys_addr_t start, phys_addr_t size, long type) return; } + if (start < PHYS_OFFSET) + return; + memblock_add(start, size); /* Reserve any memory except the ordinary RAM ranges. */ switch (type) { -- cgit v1.2.3 From 25b69a889b638b0b7e51e2c4fe717a66bec0e566 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Tue, 10 Sep 2019 05:59:07 +0200 Subject: mips: Loongson: Fix the link time qualifier of 'serial_exit()' 'exit' functions should be marked as __exit, not __init. Fixes: 85cc028817ef ("mips: make loongsoon serial driver explicitly modular") Signed-off-by: Christophe JAILLET Signed-off-by: Paul Burton Cc: chenhc@lemote.com Cc: ralf@linux-mips.org Cc: jhogan@kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: kernel-janitors@vger.kernel.org --- arch/mips/loongson64/common/serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/loongson64/common/serial.c b/arch/mips/loongson64/common/serial.c index ffefc1cb2612..98c3a7feb10f 100644 --- a/arch/mips/loongson64/common/serial.c +++ b/arch/mips/loongson64/common/serial.c @@ -110,7 +110,7 @@ static int __init serial_init(void) } module_init(serial_init); -static void __init serial_exit(void) +static void __exit serial_exit(void) { platform_device_unregister(&uart8250_device); } -- cgit v1.2.3 From 101c40ed269ccf67d3535bf2d131584008edbbd1 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Thu, 3 Oct 2019 22:46:23 +0000 Subject: MIPS: pmcs-msp71xx: Add missing MAX_PROM_MEM definition Commit b3c948e2c00f ("MIPS: msp: Record prom memory") introduced use of a MAX_PROM_MEM value but didn't define it. A bounds check in prom_meminit() suggests its value was supposed to be 5, so define it as such & adjust the bounds check to use the macro rather than a magic number. Signed-off-by: Paul Burton Fixes: b3c948e2c00f ("MIPS: msp: Record prom memory") Cc: Jiaxun Yang Cc: linux-mips@vger.kernel.org --- arch/mips/pmcs-msp71xx/msp_prom.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/pmcs-msp71xx/msp_prom.c b/arch/mips/pmcs-msp71xx/msp_prom.c index dfb527961a27..f87c522a63e6 100644 --- a/arch/mips/pmcs-msp71xx/msp_prom.c +++ b/arch/mips/pmcs-msp71xx/msp_prom.c @@ -61,6 +61,7 @@ int init_debug = 1; /* memory blocks */ struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS]; +#define MAX_PROM_MEM 5 static phys_addr_t prom_mem_base[MAX_PROM_MEM] __initdata; static phys_addr_t prom_mem_size[MAX_PROM_MEM] __initdata; static unsigned int nr_prom_mem __initdata; @@ -358,7 +359,7 @@ void __init prom_meminit(void) p++; if (type == BOOT_MEM_ROM_DATA) { - if (nr_prom_mem >= 5) { + if (nr_prom_mem >= MAX_PROM_MEM) { pr_err("Too many ROM DATA regions"); continue; } -- cgit v1.2.3 From 437450cf09c382ff26c14c868d3a1e82c269be12 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Thu, 3 Oct 2019 22:46:36 +0000 Subject: MIPS: pmcs-msp71xx: Remove unused addr variable The addr variable in prom_free_prom_memory() has been unused since commit b3c948e2c00f ("MIPS: msp: Record prom memory"), causing a warning & build failure due to -Werror. Remove the unused variable. Signed-off-by: Paul Burton Fixes: b3c948e2c00f ("MIPS: msp: Record prom memory") Cc: Jiaxun Yang Cc: linux-mips@vger.kernel.org --- arch/mips/pmcs-msp71xx/msp_prom.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/pmcs-msp71xx/msp_prom.c b/arch/mips/pmcs-msp71xx/msp_prom.c index f87c522a63e6..800a21b8b8b0 100644 --- a/arch/mips/pmcs-msp71xx/msp_prom.c +++ b/arch/mips/pmcs-msp71xx/msp_prom.c @@ -378,7 +378,6 @@ void __init prom_free_prom_memory(void) char *ptr; int len = 0; int i; - unsigned long addr; /* * preserve environment variables and command line from pmon/bbload -- cgit v1.2.3 From 015664d15270a112c2371d812f03f7c579b35a73 Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Mon, 23 Sep 2019 18:18:43 +0200 Subject: USB: rio500: Remove Rio 500 kernel driver The Rio500 kernel driver has not been used by Rio500 owners since 2001 not long after the rio500 project added support for a user-space USB stack through the very first versions of usbdevfs and then libusb. Support for the kernel driver was removed from the upstream utilities in 2008: https://gitlab.freedesktop.org/hadess/rio500/commit/943f624ab721eb8281c287650fcc9e2026f6f5db Cc: Cesar Miquel Signed-off-by: Bastien Nocera Cc: stable Link: https://lore.kernel.org/r/6251c17584d220472ce882a3d9c199c401a51a71.camel@hadess.net Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/rio.rst | 109 -------- MAINTAINERS | 7 - arch/arm/configs/badge4_defconfig | 1 - arch/arm/configs/corgi_defconfig | 1 - arch/arm/configs/pxa_defconfig | 1 - arch/arm/configs/s3c2410_defconfig | 1 - arch/arm/configs/spitz_defconfig | 1 - arch/mips/configs/mtx1_defconfig | 1 - arch/mips/configs/rm200_defconfig | 1 - drivers/usb/misc/Kconfig | 10 - drivers/usb/misc/Makefile | 1 - drivers/usb/misc/rio500.c | 554 ------------------------------------- drivers/usb/misc/rio500_usb.h | 20 -- 13 files changed, 708 deletions(-) delete mode 100644 Documentation/usb/rio.rst delete mode 100644 drivers/usb/misc/rio500.c delete mode 100644 drivers/usb/misc/rio500_usb.h (limited to 'arch/mips') diff --git a/Documentation/usb/rio.rst b/Documentation/usb/rio.rst deleted file mode 100644 index ea73475471db..000000000000 --- a/Documentation/usb/rio.rst +++ /dev/null @@ -1,109 +0,0 @@ -============ -Diamonds Rio -============ - -Copyright (C) 1999, 2000 Bruce Tenison - -Portions Copyright (C) 1999, 2000 David Nelson - -Thanks to David Nelson for guidance and the usage of the scanner.txt -and scanner.c files to model our driver and this informative file. - -Mar. 2, 2000 - -Changes -======= - -- Initial Revision - - -Overview -======== - -This README will address issues regarding how to configure the kernel -to access a RIO 500 mp3 player. -Before I explain how to use this to access the Rio500 please be warned: - -.. warning:: - - Please note that this software is still under development. The authors - are in no way responsible for any damage that may occur, no matter how - inconsequential. - -It seems that the Rio has a problem when sending .mp3 with low batteries. -I suggest when the batteries are low and you want to transfer stuff that you -replace it with a fresh one. In my case, what happened is I lost two 16kb -blocks (they are no longer usable to store information to it). But I don't -know if that's normal or not; it could simply be a problem with the flash -memory. - -In an extreme case, I left my Rio playing overnight and the batteries wore -down to nothing and appear to have corrupted the flash memory. My RIO -needed to be replaced as a result. Diamond tech support is aware of the -problem. Do NOT allow your batteries to wear down to nothing before -changing them. It appears RIO 500 firmware does not handle low battery -power well at all. - -On systems with OHCI controllers, the kernel OHCI code appears to have -power on problems with some chipsets. If you are having problems -connecting to your RIO 500, try turning it on first and then plugging it -into the USB cable. - -Contact Information -------------------- - - The main page for the project is hosted at sourceforge.net in the following - URL: . You can also go to the project's - sourceforge home page at: . - There is also a mailing list: rio500-users@lists.sourceforge.net - -Authors -------- - -Most of the code was written by Cesar Miquel . Keith -Clayton is incharge of the PPC port and making sure -things work there. Bruce Tenison is adding support -for .fon files and also does testing. The program will mostly sure be -re-written and Pete Ikusz along with the rest will re-design it. I would -also like to thank Tri Nguyen who provided use -with some important information regarding the communication with the Rio. - -Additional Information and userspace tools - - http://rio500.sourceforge.net/ - - -Requirements -============ - -A host with a USB port running a Linux kernel with RIO 500 support enabled. - -The driver is a module called rio500, which should be automatically loaded -as you plug in your device. If that fails you can manually load it with - - modprobe rio500 - -Udev should automatically create a device node as soon as plug in your device. -If that fails, you can manually add a device for the USB rio500:: - - mknod /dev/usb/rio500 c 180 64 - -In that case, set appropriate permissions for /dev/usb/rio500 (don't forget -about group and world permissions). Both read and write permissions are -required for proper operation. - -That's it. The Rio500 Utils at: http://rio500.sourceforge.net should -be able to access the rio500. - -Limits -====== - -You can use only a single rio500 device at a time with your computer. - -Bugs -==== - -If you encounter any problems feel free to drop me an email. - -Bruce Tenison -btenison@dibbs.net diff --git a/MAINTAINERS b/MAINTAINERS index 296de2b51c83..3bcf493f3f8c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16762,13 +16762,6 @@ W: http://www.linux-usb.org/usbnet S: Maintained F: drivers/net/usb/dm9601.c -USB DIAMOND RIO500 DRIVER -M: Cesar Miquel -L: rio500-users@lists.sourceforge.net -W: http://rio500.sourceforge.net -S: Maintained -F: drivers/usb/misc/rio500* - USB EHCI DRIVER M: Alan Stern L: linux-usb@vger.kernel.org diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index 5ae5b5228467..ef484c4cfd1a 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -91,7 +91,6 @@ CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_RIO500=m CONFIG_EXT2_FS=m CONFIG_EXT3_FS=m CONFIG_MSDOS_FS=y diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index e4f6442588e7..4fec2ec379ad 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -195,7 +195,6 @@ CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m -CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_CYTHERM=m diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index 787c3f9be414..b817c57f05f1 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -581,7 +581,6 @@ CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m -CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_CYTHERM=m diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 95b5a4ffddea..73ed73a8785a 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -327,7 +327,6 @@ CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m CONFIG_USB_ADUTUX=m CONFIG_USB_SEVSEG=m -CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_CYPRESS_CY7C63=m diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 4fb51d665abb..a1cdbfa064c5 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -189,7 +189,6 @@ CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m -CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_CYTHERM=m diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index 16bef819fe98..914af125a7fa 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -571,7 +571,6 @@ CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m CONFIG_USB_ADUTUX=m -CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_CYPRESS_CY7C63=m diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 8762e75f5d5f..2c7adea7638f 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -314,7 +314,6 @@ CONFIG_USB_SERIAL_SAFE_PADDED=y CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_CYTHERM=m diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index bdae62b2ffe0..9bce583aada3 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -47,16 +47,6 @@ config USB_SEVSEG To compile this driver as a module, choose M here: the module will be called usbsevseg. -config USB_RIO500 - tristate "USB Diamond Rio500 support" - help - Say Y here if you want to connect a USB Rio500 mp3 player to your - computer's USB port. Please read - for more information. - - To compile this driver as a module, choose M here: the - module will be called rio500. - config USB_LEGOTOWER tristate "USB Lego Infrared Tower support" help diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 109f54f5b9aa..0d416eb624bb 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -17,7 +17,6 @@ obj-$(CONFIG_USB_ISIGHTFW) += isight_firmware.o obj-$(CONFIG_USB_LCD) += usblcd.o obj-$(CONFIG_USB_LD) += ldusb.o obj-$(CONFIG_USB_LEGOTOWER) += legousbtower.o -obj-$(CONFIG_USB_RIO500) += rio500.o obj-$(CONFIG_USB_TEST) += usbtest.o obj-$(CONFIG_USB_EHSET_TEST_FIXTURE) += ehset.o obj-$(CONFIG_USB_TRANCEVIBRATOR) += trancevibrator.o diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c deleted file mode 100644 index 30cae5e1954d..000000000000 --- a/drivers/usb/misc/rio500.c +++ /dev/null @@ -1,554 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* -*- linux-c -*- */ - -/* - * Driver for USB Rio 500 - * - * Cesar Miquel (miquel@df.uba.ar) - * - * based on hp_scanner.c by David E. Nelson (dnelson@jump.net) - * - * Based upon mouse.c (Brad Keryan) and printer.c (Michael Gee). - * - * Changelog: - * 30/05/2003 replaced lock/unlock kernel with up/down - * Daniele Bellucci bellucda@tiscali.it - * */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "rio500_usb.h" - -#define DRIVER_AUTHOR "Cesar Miquel " -#define DRIVER_DESC "USB Rio 500 driver" - -#define RIO_MINOR 64 - -/* stall/wait timeout for rio */ -#define NAK_TIMEOUT (HZ) - -#define IBUF_SIZE 0x1000 - -/* Size of the rio buffer */ -#define OBUF_SIZE 0x10000 - -struct rio_usb_data { - struct usb_device *rio_dev; /* init: probe_rio */ - unsigned int ifnum; /* Interface number of the USB device */ - int isopen; /* nz if open */ - int present; /* Device is present on the bus */ - char *obuf, *ibuf; /* transfer buffers */ - char bulk_in_ep, bulk_out_ep; /* Endpoint assignments */ - wait_queue_head_t wait_q; /* for timeouts */ -}; - -static DEFINE_MUTEX(rio500_mutex); -static struct rio_usb_data rio_instance; - -static int open_rio(struct inode *inode, struct file *file) -{ - struct rio_usb_data *rio = &rio_instance; - - /* against disconnect() */ - mutex_lock(&rio500_mutex); - - if (rio->isopen || !rio->present) { - mutex_unlock(&rio500_mutex); - return -EBUSY; - } - rio->isopen = 1; - - init_waitqueue_head(&rio->wait_q); - - - dev_info(&rio->rio_dev->dev, "Rio opened.\n"); - mutex_unlock(&rio500_mutex); - - return 0; -} - -static int close_rio(struct inode *inode, struct file *file) -{ - struct rio_usb_data *rio = &rio_instance; - - /* against disconnect() */ - mutex_lock(&rio500_mutex); - - rio->isopen = 0; - if (!rio->present) { - /* cleanup has been delayed */ - kfree(rio->ibuf); - kfree(rio->obuf); - rio->ibuf = NULL; - rio->obuf = NULL; - } else { - dev_info(&rio->rio_dev->dev, "Rio closed.\n"); - } - mutex_unlock(&rio500_mutex); - return 0; -} - -static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg) -{ - struct RioCommand rio_cmd; - struct rio_usb_data *rio = &rio_instance; - void __user *data; - unsigned char *buffer; - int result, requesttype; - int retries; - int retval=0; - - mutex_lock(&rio500_mutex); - /* Sanity check to make sure rio is connected, powered, etc */ - if (rio->present == 0 || rio->rio_dev == NULL) { - retval = -ENODEV; - goto err_out; - } - - switch (cmd) { - case RIO_RECV_COMMAND: - data = (void __user *) arg; - if (data == NULL) - break; - if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) { - retval = -EFAULT; - goto err_out; - } - if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) { - retval = -EINVAL; - goto err_out; - } - buffer = (unsigned char *) __get_free_page(GFP_KERNEL); - if (buffer == NULL) { - retval = -ENOMEM; - goto err_out; - } - if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) { - retval = -EFAULT; - free_page((unsigned long) buffer); - goto err_out; - } - - requesttype = rio_cmd.requesttype | USB_DIR_IN | - USB_TYPE_VENDOR | USB_RECIP_DEVICE; - dev_dbg(&rio->rio_dev->dev, - "sending command:reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n", - requesttype, rio_cmd.request, rio_cmd.value, - rio_cmd.index, rio_cmd.length); - /* Send rio control message */ - retries = 3; - while (retries) { - result = usb_control_msg(rio->rio_dev, - usb_rcvctrlpipe(rio-> rio_dev, 0), - rio_cmd.request, - requesttype, - rio_cmd.value, - rio_cmd.index, buffer, - rio_cmd.length, - jiffies_to_msecs(rio_cmd.timeout)); - if (result == -ETIMEDOUT) - retries--; - else if (result < 0) { - dev_err(&rio->rio_dev->dev, - "Error executing ioctrl. code = %d\n", - result); - retries = 0; - } else { - dev_dbg(&rio->rio_dev->dev, - "Executed ioctl. Result = %d (data=%02x)\n", - result, buffer[0]); - if (copy_to_user(rio_cmd.buffer, buffer, - rio_cmd.length)) { - free_page((unsigned long) buffer); - retval = -EFAULT; - goto err_out; - } - retries = 0; - } - - /* rio_cmd.buffer contains a raw stream of single byte - data which has been returned from rio. Data is - interpreted at application level. For data that - will be cast to data types longer than 1 byte, data - will be little_endian and will potentially need to - be swapped at the app level */ - - } - free_page((unsigned long) buffer); - break; - - case RIO_SEND_COMMAND: - data = (void __user *) arg; - if (data == NULL) - break; - if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) { - retval = -EFAULT; - goto err_out; - } - if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) { - retval = -EINVAL; - goto err_out; - } - buffer = (unsigned char *) __get_free_page(GFP_KERNEL); - if (buffer == NULL) { - retval = -ENOMEM; - goto err_out; - } - if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) { - free_page((unsigned long)buffer); - retval = -EFAULT; - goto err_out; - } - - requesttype = rio_cmd.requesttype | USB_DIR_OUT | - USB_TYPE_VENDOR | USB_RECIP_DEVICE; - dev_dbg(&rio->rio_dev->dev, - "sending command: reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n", - requesttype, rio_cmd.request, rio_cmd.value, - rio_cmd.index, rio_cmd.length); - /* Send rio control message */ - retries = 3; - while (retries) { - result = usb_control_msg(rio->rio_dev, - usb_sndctrlpipe(rio-> rio_dev, 0), - rio_cmd.request, - requesttype, - rio_cmd.value, - rio_cmd.index, buffer, - rio_cmd.length, - jiffies_to_msecs(rio_cmd.timeout)); - if (result == -ETIMEDOUT) - retries--; - else if (result < 0) { - dev_err(&rio->rio_dev->dev, - "Error executing ioctrl. code = %d\n", - result); - retries = 0; - } else { - dev_dbg(&rio->rio_dev->dev, - "Executed ioctl. Result = %d\n", result); - retries = 0; - - } - - } - free_page((unsigned long) buffer); - break; - - default: - retval = -ENOTTY; - break; - } - - -err_out: - mutex_unlock(&rio500_mutex); - return retval; -} - -static ssize_t -write_rio(struct file *file, const char __user *buffer, - size_t count, loff_t * ppos) -{ - DEFINE_WAIT(wait); - struct rio_usb_data *rio = &rio_instance; - - unsigned long copy_size; - unsigned long bytes_written = 0; - unsigned int partial; - - int result = 0; - int maxretry; - int errn = 0; - int intr; - - intr = mutex_lock_interruptible(&rio500_mutex); - if (intr) - return -EINTR; - /* Sanity check to make sure rio is connected, powered, etc */ - if (rio->present == 0 || rio->rio_dev == NULL) { - mutex_unlock(&rio500_mutex); - return -ENODEV; - } - - - - do { - unsigned long thistime; - char *obuf = rio->obuf; - - thistime = copy_size = - (count >= OBUF_SIZE) ? OBUF_SIZE : count; - if (copy_from_user(rio->obuf, buffer, copy_size)) { - errn = -EFAULT; - goto error; - } - maxretry = 5; - while (thistime) { - if (!rio->rio_dev) { - errn = -ENODEV; - goto error; - } - if (signal_pending(current)) { - mutex_unlock(&rio500_mutex); - return bytes_written ? bytes_written : -EINTR; - } - - result = usb_bulk_msg(rio->rio_dev, - usb_sndbulkpipe(rio->rio_dev, 2), - obuf, thistime, &partial, 5000); - - dev_dbg(&rio->rio_dev->dev, - "write stats: result:%d thistime:%lu partial:%u\n", - result, thistime, partial); - - if (result == -ETIMEDOUT) { /* NAK - so hold for a while */ - if (!maxretry--) { - errn = -ETIME; - goto error; - } - prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE); - schedule_timeout(NAK_TIMEOUT); - finish_wait(&rio->wait_q, &wait); - continue; - } else if (!result && partial) { - obuf += partial; - thistime -= partial; - } else - break; - } - if (result) { - dev_err(&rio->rio_dev->dev, "Write Whoops - %x\n", - result); - errn = -EIO; - goto error; - } - bytes_written += copy_size; - count -= copy_size; - buffer += copy_size; - } while (count > 0); - - mutex_unlock(&rio500_mutex); - - return bytes_written ? bytes_written : -EIO; - -error: - mutex_unlock(&rio500_mutex); - return errn; -} - -static ssize_t -read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) -{ - DEFINE_WAIT(wait); - struct rio_usb_data *rio = &rio_instance; - ssize_t read_count; - unsigned int partial; - int this_read; - int result; - int maxretry = 10; - char *ibuf; - int intr; - - intr = mutex_lock_interruptible(&rio500_mutex); - if (intr) - return -EINTR; - /* Sanity check to make sure rio is connected, powered, etc */ - if (rio->present == 0 || rio->rio_dev == NULL) { - mutex_unlock(&rio500_mutex); - return -ENODEV; - } - - ibuf = rio->ibuf; - - read_count = 0; - - - while (count > 0) { - if (signal_pending(current)) { - mutex_unlock(&rio500_mutex); - return read_count ? read_count : -EINTR; - } - if (!rio->rio_dev) { - mutex_unlock(&rio500_mutex); - return -ENODEV; - } - this_read = (count >= IBUF_SIZE) ? IBUF_SIZE : count; - - result = usb_bulk_msg(rio->rio_dev, - usb_rcvbulkpipe(rio->rio_dev, 1), - ibuf, this_read, &partial, - 8000); - - dev_dbg(&rio->rio_dev->dev, - "read stats: result:%d this_read:%u partial:%u\n", - result, this_read, partial); - - if (partial) { - count = this_read = partial; - } else if (result == -ETIMEDOUT || result == 15) { /* FIXME: 15 ??? */ - if (!maxretry--) { - mutex_unlock(&rio500_mutex); - dev_err(&rio->rio_dev->dev, - "read_rio: maxretry timeout\n"); - return -ETIME; - } - prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE); - schedule_timeout(NAK_TIMEOUT); - finish_wait(&rio->wait_q, &wait); - continue; - } else if (result != -EREMOTEIO) { - mutex_unlock(&rio500_mutex); - dev_err(&rio->rio_dev->dev, - "Read Whoops - result:%d partial:%u this_read:%u\n", - result, partial, this_read); - return -EIO; - } else { - mutex_unlock(&rio500_mutex); - return (0); - } - - if (this_read) { - if (copy_to_user(buffer, ibuf, this_read)) { - mutex_unlock(&rio500_mutex); - return -EFAULT; - } - count -= this_read; - read_count += this_read; - buffer += this_read; - } - } - mutex_unlock(&rio500_mutex); - return read_count; -} - -static const struct file_operations usb_rio_fops = { - .owner = THIS_MODULE, - .read = read_rio, - .write = write_rio, - .unlocked_ioctl = ioctl_rio, - .open = open_rio, - .release = close_rio, - .llseek = noop_llseek, -}; - -static struct usb_class_driver usb_rio_class = { - .name = "rio500%d", - .fops = &usb_rio_fops, - .minor_base = RIO_MINOR, -}; - -static int probe_rio(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *dev = interface_to_usbdev(intf); - struct rio_usb_data *rio = &rio_instance; - int retval = -ENOMEM; - char *ibuf, *obuf; - - if (rio->present) { - dev_info(&intf->dev, "Second USB Rio at address %d refused\n", dev->devnum); - return -EBUSY; - } - dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum); - - obuf = kmalloc(OBUF_SIZE, GFP_KERNEL); - if (!obuf) { - dev_err(&dev->dev, - "probe_rio: Not enough memory for the output buffer\n"); - goto err_obuf; - } - dev_dbg(&intf->dev, "obuf address: %p\n", obuf); - - ibuf = kmalloc(IBUF_SIZE, GFP_KERNEL); - if (!ibuf) { - dev_err(&dev->dev, - "probe_rio: Not enough memory for the input buffer\n"); - goto err_ibuf; - } - dev_dbg(&intf->dev, "ibuf address: %p\n", ibuf); - - mutex_lock(&rio500_mutex); - rio->rio_dev = dev; - rio->ibuf = ibuf; - rio->obuf = obuf; - rio->present = 1; - mutex_unlock(&rio500_mutex); - - retval = usb_register_dev(intf, &usb_rio_class); - if (retval) { - dev_err(&dev->dev, - "Not able to get a minor for this device.\n"); - goto err_register; - } - - usb_set_intfdata(intf, rio); - return retval; - - err_register: - mutex_lock(&rio500_mutex); - rio->present = 0; - mutex_unlock(&rio500_mutex); - err_ibuf: - kfree(obuf); - err_obuf: - return retval; -} - -static void disconnect_rio(struct usb_interface *intf) -{ - struct rio_usb_data *rio = usb_get_intfdata (intf); - - usb_set_intfdata (intf, NULL); - if (rio) { - usb_deregister_dev(intf, &usb_rio_class); - - mutex_lock(&rio500_mutex); - if (rio->isopen) { - rio->isopen = 0; - /* better let it finish - the release will do whats needed */ - rio->rio_dev = NULL; - mutex_unlock(&rio500_mutex); - return; - } - kfree(rio->ibuf); - kfree(rio->obuf); - - dev_info(&intf->dev, "USB Rio disconnected.\n"); - - rio->present = 0; - mutex_unlock(&rio500_mutex); - } -} - -static const struct usb_device_id rio_table[] = { - { USB_DEVICE(0x0841, 1) }, /* Rio 500 */ - { } /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE (usb, rio_table); - -static struct usb_driver rio_driver = { - .name = "rio500", - .probe = probe_rio, - .disconnect = disconnect_rio, - .id_table = rio_table, -}; - -module_usb_driver(rio_driver); - -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); -MODULE_LICENSE("GPL"); - diff --git a/drivers/usb/misc/rio500_usb.h b/drivers/usb/misc/rio500_usb.h deleted file mode 100644 index 6db7a5863496..000000000000 --- a/drivers/usb/misc/rio500_usb.h +++ /dev/null @@ -1,20 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* ---------------------------------------------------------------------- - Copyright (C) 2000 Cesar Miquel (miquel@df.uba.ar) - ---------------------------------------------------------------------- */ - -#define RIO_SEND_COMMAND 0x1 -#define RIO_RECV_COMMAND 0x2 - -#define RIO_DIR_OUT 0x0 -#define RIO_DIR_IN 0x1 - -struct RioCommand { - short length; - int request; - int requesttype; - int value; - int index; - void __user *buffer; - int timeout; -}; -- cgit v1.2.3 From 6822c29ddbbdeafd8d1b79ebe6c51b83efd55ae1 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 4 Oct 2019 17:41:02 +0000 Subject: MIPS: fw/arc: Remove unused addr variable The addr variable in prom_free_prom_memory() has been unused since commit 0df1007677d5 ("MIPS: fw: Record prom memory"), leading to a compiler warning: arch/mips/fw/arc/memory.c:163:16: warning: unused variable 'addr' [-Wunused-variable] Fix this by removing the unused variable. Signed-off-by: Paul Burton Fixes: 0df1007677d5 ("MIPS: fw: Record prom memory") Cc: Jiaxun Yang Cc: linux-mips@vger.kernel.org --- arch/mips/fw/arc/memory.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/fw/arc/memory.c b/arch/mips/fw/arc/memory.c index af44b35d79a1..b4328b3b5288 100644 --- a/arch/mips/fw/arc/memory.c +++ b/arch/mips/fw/arc/memory.c @@ -160,7 +160,6 @@ void __init prom_meminit(void) void __init prom_free_prom_memory(void) { - unsigned long addr; int i; if (prom_flags & PROM_FLAG_DONT_FREE_TEMP) -- cgit v1.2.3 From 88356d09904bc606182c625575237269aeece22e Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Sun, 6 Oct 2019 15:12:32 +0200 Subject: MIPS: include: Mark __cmpxchg as __always_inline Commit ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") allows compiler to uninline functions marked as 'inline'. In cace of cmpxchg this would cause to reference function __cmpxchg_called_with_bad_pointer, which is a error case for catching bugs and will not happen for correct code, if __cmpxchg is inlined. Signed-off-by: Thomas Bogendoerfer [paul.burton@mips.com: s/__cmpxchd/__cmpxchg in subject] Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org --- arch/mips/include/asm/cmpxchg.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h index 79bf34efbc04..012dcf7046ad 100644 --- a/arch/mips/include/asm/cmpxchg.h +++ b/arch/mips/include/asm/cmpxchg.h @@ -153,8 +153,9 @@ static inline unsigned long __xchg(volatile void *ptr, unsigned long x, extern unsigned long __cmpxchg_small(volatile void *ptr, unsigned long old, unsigned long new, unsigned int size); -static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, - unsigned long new, unsigned int size) +static __always_inline +unsigned long __cmpxchg(volatile void *ptr, unsigned long old, + unsigned long new, unsigned int size) { switch (size) { case 1: -- cgit v1.2.3 From 46f1619500d022501a4f0389f9f4c349ab46bb86 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Wed, 9 Oct 2019 12:06:00 +0200 Subject: MIPS: include: Mark __xchg as __always_inline MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") allows compiler to uninline functions marked as 'inline'. In cace of __xchg this would cause to reference function __xchg_called_with_bad_pointer, which is an error case for catching bugs and will not happen for correct code, if __xchg is inlined. Signed-off-by: Thomas Bogendoerfer Reviewed-by: Philippe Mathieu-Daudé Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org --- arch/mips/include/asm/cmpxchg.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h index 012dcf7046ad..f6136871561d 100644 --- a/arch/mips/include/asm/cmpxchg.h +++ b/arch/mips/include/asm/cmpxchg.h @@ -77,8 +77,8 @@ extern unsigned long __xchg_called_with_bad_pointer(void) extern unsigned long __xchg_small(volatile void *ptr, unsigned long val, unsigned int size); -static inline unsigned long __xchg(volatile void *ptr, unsigned long x, - int size) +static __always_inline +unsigned long __xchg(volatile void *ptr, unsigned long x, int size) { switch (size) { case 1: -- cgit v1.2.3 From efcb529694c3b707dc0471b312944337ba16e4dd Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Wed, 9 Oct 2019 17:10:56 +0200 Subject: MIPS: fw: sni: Fix out of bounds init of o32 stack Use ARRAY_SIZE to caluculate the top of the o32 stack. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org --- arch/mips/fw/sni/sniprom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/fw/sni/sniprom.c b/arch/mips/fw/sni/sniprom.c index 8772617b64ce..80112f2298b6 100644 --- a/arch/mips/fw/sni/sniprom.c +++ b/arch/mips/fw/sni/sniprom.c @@ -43,7 +43,7 @@ /* O32 stack has to be 8-byte aligned. */ static u64 o32_stk[4096]; -#define O32_STK &o32_stk[sizeof(o32_stk)] +#define O32_STK (&o32_stk[ARRAY_SIZE(o32_stk)]) #define __PROM_O32(fun, arg) fun arg __asm__(#fun); \ __asm__(#fun " = call_o32") -- cgit v1.2.3 From 38dffe1e4dde1d3174fdce09d67370412843ebb5 Mon Sep 17 00:00:00 2001 From: Jiaxun Yang Date: Thu, 10 Oct 2019 23:01:57 +0800 Subject: MIPS: elf_hwcap: Export userspace ASEs A Golang developer reported MIPS hwcap isn't reflecting instructions that the processor actually supported so programs can't apply optimized code at runtime. Thus we export the ASEs that can be used in userspace programs. Reported-by: Meng Zhuo Signed-off-by: Jiaxun Yang Cc: linux-mips@vger.kernel.org Cc: Paul Burton Cc: # 4.14+ Signed-off-by: Paul Burton --- arch/mips/include/uapi/asm/hwcap.h | 11 +++++++++++ arch/mips/kernel/cpu-probe.c | 33 +++++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/include/uapi/asm/hwcap.h b/arch/mips/include/uapi/asm/hwcap.h index a2aba4b059e6..1ade1daa4921 100644 --- a/arch/mips/include/uapi/asm/hwcap.h +++ b/arch/mips/include/uapi/asm/hwcap.h @@ -6,5 +6,16 @@ #define HWCAP_MIPS_R6 (1 << 0) #define HWCAP_MIPS_MSA (1 << 1) #define HWCAP_MIPS_CRC32 (1 << 2) +#define HWCAP_MIPS_MIPS16 (1 << 3) +#define HWCAP_MIPS_MDMX (1 << 4) +#define HWCAP_MIPS_MIPS3D (1 << 5) +#define HWCAP_MIPS_SMARTMIPS (1 << 6) +#define HWCAP_MIPS_DSP (1 << 7) +#define HWCAP_MIPS_DSP2 (1 << 8) +#define HWCAP_MIPS_DSP3 (1 << 9) +#define HWCAP_MIPS_MIPS16E2 (1 << 10) +#define HWCAP_LOONGSON_MMI (1 << 11) +#define HWCAP_LOONGSON_EXT (1 << 12) +#define HWCAP_LOONGSON_EXT2 (1 << 13) #endif /* _UAPI_ASM_HWCAP_H */ diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index c2eb392597bf..f521cbf934e7 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -2180,6 +2180,39 @@ void cpu_probe(void) elf_hwcap |= HWCAP_MIPS_MSA; } + if (cpu_has_mips16) + elf_hwcap |= HWCAP_MIPS_MIPS16; + + if (cpu_has_mdmx) + elf_hwcap |= HWCAP_MIPS_MDMX; + + if (cpu_has_mips3d) + elf_hwcap |= HWCAP_MIPS_MIPS3D; + + if (cpu_has_smartmips) + elf_hwcap |= HWCAP_MIPS_SMARTMIPS; + + if (cpu_has_dsp) + elf_hwcap |= HWCAP_MIPS_DSP; + + if (cpu_has_dsp2) + elf_hwcap |= HWCAP_MIPS_DSP2; + + if (cpu_has_dsp3) + elf_hwcap |= HWCAP_MIPS_DSP3; + + if (cpu_has_mips16e2) + elf_hwcap |= HWCAP_MIPS_MIPS16E2; + + if (cpu_has_loongson_mmi) + elf_hwcap |= HWCAP_LOONGSON_MMI; + + if (cpu_has_loongson_ext) + elf_hwcap |= HWCAP_LOONGSON_EXT; + + if (cpu_has_loongson_ext2) + elf_hwcap |= HWCAP_LOONGSON_EXT2; + if (cpu_has_vz) cpu_probe_vz(c); -- cgit v1.2.3 From 2f2b4fd674cadd8c6b40eb629e140a14db4068fd Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Thu, 10 Oct 2019 18:54:03 +0000 Subject: MIPS: Disable Loongson MMI instructions for kernel build MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit GCC 9.x automatically enables support for Loongson MMI instructions when using some -march= flags, and then errors out when -msoft-float is specified with: cc1: error: ‘-mloongson-mmi’ must be used with ‘-mhard-float’ The kernel shouldn't be using these MMI instructions anyway, just as it doesn't use floating point instructions. Explicitly disable them in order to fix the build with GCC 9.x. Signed-off-by: Paul Burton Fixes: 3702bba5eb4f ("MIPS: Loongson: Add GCC 4.4 support for Loongson2E") Fixes: 6f7a251a259e ("MIPS: Loongson: Add basic Loongson 2F support") Fixes: 5188129b8c9f ("MIPS: Loongson-3: Improve -march option and move it to Platform") Cc: Huacai Chen Cc: Jiaxun Yang Cc: stable@vger.kernel.org # v2.6.32+ Cc: linux-mips@vger.kernel.org --- arch/mips/loongson64/Platform | 4 ++++ arch/mips/vdso/Makefile | 1 + 2 files changed, 5 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform index c1a4d4dc4665..9f79908f5063 100644 --- a/arch/mips/loongson64/Platform +++ b/arch/mips/loongson64/Platform @@ -66,6 +66,10 @@ else $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) endif +# Some -march= flags enable MMI instructions, and GCC complains about that +# support being enabled alongside -msoft-float. Thus explicitly disable MMI. +cflags-y += $(call cc-option,-mno-loongson-mmi) + # # Loongson Machines' Support # diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile index 807f0f782f75..996a934ece7d 100644 --- a/arch/mips/vdso/Makefile +++ b/arch/mips/vdso/Makefile @@ -15,6 +15,7 @@ ccflags-vdso := \ $(filter -mmicromips,$(KBUILD_CFLAGS)) \ $(filter -march=%,$(KBUILD_CFLAGS)) \ $(filter -m%-float,$(KBUILD_CFLAGS)) \ + $(filter -mno-loongson-%,$(KBUILD_CFLAGS)) \ -D__VDSO__ ifdef CONFIG_CC_IS_CLANG -- cgit v1.2.3