From 894673ee6122a3ce1958e1fe096901ba5356a96b Mon Sep 17 00:00:00 2001 From: Jon Smirl Date: Mon, 10 Jul 2006 04:44:13 -0700 Subject: [PATCH] tty: Remove include of screen_info.h from tty.h screen_info.h doesn't have anything to do with the tty layer and shouldn't be included by tty.h. This patches removes the include and modifies all users to directly include screen_info.h. struct screen_info is mainly used to communicate with the console drivers in drivers/video/console. Note that this patch touches every arch and I have no way of testing it. If there is a mistake the worst thing that will happen is a compile error. [akpm@osdl.org: fix arm build] [akpm@osdl.org: fix alpha build] Signed-off-by: Jon Smirl Signed-off-by: Antonino Daplas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/ppc_ksyms.c | 2 +- arch/powerpc/kernel/setup-common.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc/kernel') diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index e3b80f71748e..f6a05f090b25 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -5,7 +5,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index c6d7b98af7d5..499c3861074f 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include #include #include -- cgit v1.2.3 From 6e99e4582861578fb00d84d085f8f283569f51dd Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 10 Jul 2006 04:44:42 -0700 Subject: [PATCH] powerpc: fix trigger handling in the new irq code This patch slightly reworks the new irq code to fix a small design error. I removed the passing of the trigger to the map() calls entirely, it was not a good idea to have one call do two different things. It also fixes a couple of corner cases. Mapping a linux virtual irq to a physical irq now does only that. Setting the trigger is a different action which has a different call. The main changes are: - I no longer call host->ops->map() for an already mapped irq, I just return the virtual number that was already mapped. It was called before to give an opportunity to change the trigger, but that was causing issues as that could happen while the interrupt was in use by a device, and because of the trigger change, map would potentially muck around with things in a racy way. That was causing much burden on a given's controller implementation of map() to get it right. This is much simpler now. map() is only called on the initial mapping of an irq, meaning that you know that this irq is _not_ being used. You can initialize the hardware if you want (though you don't have to). - Controllers that can handle different type of triggers (level/edge/etc...) now implement the standard irq_chip->set_type() call as defined by the generic code. That means that you can use the standard set_irq_type() to configure an irq line manually if you wish or (though I don't like that interface), pass explicit trigger flags to request_irq() as defined by the generic kernel interfaces. Also, using those interfaces guarantees that your controller set_type callback is called with the descriptor lock held, thus providing locking against activity on the same interrupt (including mask/unmask/etc...) automatically. A result is that, for example, MPIC's own map() implementation calls irq_set_type(NONE) to configure the hardware to the default triggers. - To allow the above, the irq_map array entry for the new mapped interrupt is now set before map() callback is called for the controller. - The irq_create_of_mapping() (also used by irq_of_parse_and_map()) function for mapping interrupts from the device-tree now also call the separate set_irq_type(), and only does so if there is a change in the trigger type. - While I was at it, I changed pci_read_irq_line() (which is the helper I would expect most archs to use in their pcibios_fixup() to get the PCI interrupt routing from the device tree) to also handle a fallback when the DT mapping fails consisting of reading the PCI_INTERRUPT_PIN to know wether the device has an interrupt at all, and the the PCI_INTERRUPT_LINE to get an interrupt number from the device. That number is then mapped using the default controller, and the trigger is set to level low. That default behaviour works for several platforms that don't have a proper interrupt tree like Pegasos. If it doesn't work for your platform, then either provide a proper interrupt tree from the firmware so that fallback isn't needed, or don't call pci_read_irq_line() - Add back a bit that got dropped by my main rework patch for properly clearing pending IPIs on pSeries when using a kexec Signed-off-by: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/ibmebus.c | 2 +- arch/powerpc/kernel/irq.c | 47 ++++---- arch/powerpc/kernel/pci_32.c | 36 +++++-- arch/powerpc/kernel/pci_64.c | 36 +++++-- arch/powerpc/platforms/cell/interrupt.c | 4 +- arch/powerpc/platforms/cell/spider-pic.c | 70 ++++++------ arch/powerpc/platforms/cell/spu_base.c | 6 +- arch/powerpc/platforms/iseries/irq.c | 4 +- arch/powerpc/platforms/powermac/pci.c | 13 +-- arch/powerpc/platforms/powermac/pic.c | 8 +- arch/powerpc/platforms/pseries/ras.c | 3 +- arch/powerpc/platforms/pseries/xics.c | 34 +++--- arch/powerpc/sysdev/i8259.c | 4 +- arch/powerpc/sysdev/mpic.c | 180 ++++++++++++++----------------- drivers/char/hvsi.c | 2 +- drivers/macintosh/macio_asic.c | 2 +- include/asm-powerpc/irq.h | 38 +++---- 17 files changed, 258 insertions(+), 231 deletions(-) (limited to 'arch/powerpc/kernel') diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c index 97ddc02a3d42..68e5ab0443d2 100644 --- a/arch/powerpc/kernel/ibmebus.c +++ b/arch/powerpc/kernel/ibmebus.c @@ -323,7 +323,7 @@ int ibmebus_request_irq(struct ibmebus_dev *dev, unsigned long irq_flags, const char * devname, void *dev_id) { - unsigned int irq = irq_create_mapping(NULL, ist, 0); + unsigned int irq = irq_create_mapping(NULL, ist); if (irq == NO_IRQ) return -EINVAL; diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 8cf987809c66..01bdae35cb55 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -391,15 +391,14 @@ struct irq_host *irq_alloc_host(unsigned int revmap_type, irq_map[i].host = host; smp_wmb(); - /* Clear some flags */ - get_irq_desc(i)->status - &= ~(IRQ_NOREQUEST | IRQ_LEVEL); + /* Clear norequest flags */ + get_irq_desc(i)->status &= ~IRQ_NOREQUEST; /* Legacy flags are left to default at this point, * one can then use irq_create_mapping() to * explicitely change them */ - ops->map(host, i, i, 0); + ops->map(host, i, i); } break; case IRQ_HOST_MAP_LINEAR: @@ -457,13 +456,11 @@ void irq_set_virq_count(unsigned int count) } unsigned int irq_create_mapping(struct irq_host *host, - irq_hw_number_t hwirq, - unsigned int flags) + irq_hw_number_t hwirq) { unsigned int virq, hint; - pr_debug("irq: irq_create_mapping(0x%p, 0x%lx, 0x%x)\n", - host, hwirq, flags); + pr_debug("irq: irq_create_mapping(0x%p, 0x%lx)\n", host, hwirq); /* Look for default host if nececssary */ if (host == NULL) @@ -482,7 +479,6 @@ unsigned int irq_create_mapping(struct irq_host *host, virq = irq_find_mapping(host, hwirq); if (virq != IRQ_NONE) { pr_debug("irq: -> existing mapping on virq %d\n", virq); - host->ops->map(host, virq, hwirq, flags); return virq; } @@ -504,18 +500,18 @@ unsigned int irq_create_mapping(struct irq_host *host, } pr_debug("irq: -> obtained virq %d\n", virq); - /* Clear some flags */ - get_irq_desc(virq)->status &= ~(IRQ_NOREQUEST | IRQ_LEVEL); + /* Clear IRQ_NOREQUEST flag */ + get_irq_desc(virq)->status &= ~IRQ_NOREQUEST; /* map it */ - if (host->ops->map(host, virq, hwirq, flags)) { + smp_wmb(); + irq_map[virq].hwirq = hwirq; + smp_mb(); + if (host->ops->map(host, virq, hwirq)) { pr_debug("irq: -> mapping failed, freeing\n"); irq_free_virt(virq, 1); return NO_IRQ; } - smp_wmb(); - irq_map[virq].hwirq = hwirq; - smp_mb(); return virq; } EXPORT_SYMBOL_GPL(irq_create_mapping); @@ -525,25 +521,38 @@ extern unsigned int irq_create_of_mapping(struct device_node *controller, { struct irq_host *host; irq_hw_number_t hwirq; - unsigned int flags = IRQ_TYPE_NONE; + unsigned int type = IRQ_TYPE_NONE; + unsigned int virq; if (controller == NULL) host = irq_default_host; else host = irq_find_host(controller); - if (host == NULL) + if (host == NULL) { + printk(KERN_WARNING "irq: no irq host found for %s !\n", + controller->full_name); return NO_IRQ; + } /* If host has no translation, then we assume interrupt line */ if (host->ops->xlate == NULL) hwirq = intspec[0]; else { if (host->ops->xlate(host, controller, intspec, intsize, - &hwirq, &flags)) + &hwirq, &type)) return NO_IRQ; } - return irq_create_mapping(host, hwirq, flags); + /* Create mapping */ + virq = irq_create_mapping(host, hwirq); + if (virq == NO_IRQ) + return virq; + + /* Set type if specified and different than the current one */ + if (type != IRQ_TYPE_NONE && + type != (get_irq_desc(virq)->status & IRQF_TRIGGER_MASK)) + set_irq_type(virq, type); + return virq; } EXPORT_SYMBOL_GPL(irq_create_of_mapping); diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 898dae8ab6d9..09b1e1bbb29b 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include @@ -18,7 +19,6 @@ #include #include #include -#include #include #include @@ -1420,15 +1420,37 @@ int pci_read_irq_line(struct pci_dev *pci_dev) DBG("Try to map irq for %s...\n", pci_name(pci_dev)); + /* Try to get a mapping from the device-tree */ if (of_irq_map_pci(pci_dev, &oirq)) { - DBG(" -> failed !\n"); - return -1; - } + u8 line, pin; + + /* If that fails, lets fallback to what is in the config + * space and map that through the default controller. We + * also set the type to level low since that's what PCI + * interrupts are. If your platform does differently, then + * either provide a proper interrupt tree or don't use this + * function. + */ + if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin)) + return -1; + if (pin == 0) + return -1; + if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) || + line == 0xff) { + return -1; + } + DBG(" -> no map ! Using irq line %d from PCI config\n", line); - DBG(" -> got one, spec %d cells (0x%08x...) on %s\n", - oirq.size, oirq.specifier[0], oirq.controller->full_name); + virq = irq_create_mapping(NULL, line); + if (virq != NO_IRQ) + set_irq_type(virq, IRQ_TYPE_LEVEL_LOW); + } else { + DBG(" -> got one, spec %d cells (0x%08x...) on %s\n", + oirq.size, oirq.specifier[0], oirq.controller->full_name); - virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size); + virq = irq_create_of_mapping(oirq.controller, oirq.specifier, + oirq.size); + } if(virq == NO_IRQ) { DBG(" -> failed to map !\n"); return -1; diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index efc0b5559ee0..2fce7738e9e2 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -21,13 +21,13 @@ #include #include #include +#include #include #include #include #include #include -#include #include #include @@ -1289,15 +1289,37 @@ int pci_read_irq_line(struct pci_dev *pci_dev) DBG("Try to map irq for %s...\n", pci_name(pci_dev)); + /* Try to get a mapping from the device-tree */ if (of_irq_map_pci(pci_dev, &oirq)) { - DBG(" -> failed !\n"); - return -1; - } + u8 line, pin; + + /* If that fails, lets fallback to what is in the config + * space and map that through the default controller. We + * also set the type to level low since that's what PCI + * interrupts are. If your platform does differently, then + * either provide a proper interrupt tree or don't use this + * function. + */ + if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin)) + return -1; + if (pin == 0) + return -1; + if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) || + line == 0xff) { + return -1; + } + DBG(" -> no map ! Using irq line %d from PCI config\n", line); - DBG(" -> got one, spec %d cells (0x%08x...) on %s\n", - oirq.size, oirq.specifier[0], oirq.controller->full_name); + virq = irq_create_mapping(NULL, line); + if (virq != NO_IRQ) + set_irq_type(virq, IRQ_TYPE_LEVEL_LOW); + } else { + DBG(" -> got one, spec %d cells (0x%08x...) on %s\n", + oirq.size, oirq.specifier[0], oirq.controller->full_name); - virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size); + virq = irq_create_of_mapping(oirq.controller, oirq.specifier, + oirq.size); + } if(virq == NO_IRQ) { DBG(" -> failed to map !\n"); return -1; diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c index 9d5da7896892..d7bbb61109f9 100644 --- a/arch/powerpc/platforms/cell/interrupt.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -159,7 +159,7 @@ static void iic_request_ipi(int ipi, const char *name) if (iic_hosts[node] == NULL) continue; virq = irq_create_mapping(iic_hosts[node], - iic_ipi_to_irq(ipi), 0); + iic_ipi_to_irq(ipi)); if (virq == NO_IRQ) { printk(KERN_ERR "iic: failed to map IPI %s on node %d\n", @@ -197,7 +197,7 @@ static int iic_host_match(struct irq_host *h, struct device_node *node) } static int iic_host_map(struct irq_host *h, unsigned int virq, - irq_hw_number_t hw, unsigned int flags) + irq_hw_number_t hw) { if (hw < IIC_IRQ_IPI0) set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq); diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c index ae7ef88f1a37..15217bb0402f 100644 --- a/arch/powerpc/platforms/cell/spider-pic.c +++ b/arch/powerpc/platforms/cell/spider-pic.c @@ -85,9 +85,6 @@ static void spider_unmask_irq(unsigned int virq) struct spider_pic *pic = spider_virq_to_pic(virq); void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq); - /* We use no locking as we should be covered by the descriptor lock - * for access to invidual source configuration registers - */ out_be32(cfg, in_be32(cfg) | 0x30000000u); } @@ -96,9 +93,6 @@ static void spider_mask_irq(unsigned int virq) struct spider_pic *pic = spider_virq_to_pic(virq); void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq); - /* We use no locking as we should be covered by the descriptor lock - * for access to invidual source configuration registers - */ out_be32(cfg, in_be32(cfg) & ~0x30000000u); } @@ -120,26 +114,14 @@ static void spider_ack_irq(unsigned int virq) out_be32(pic->regs + TIR_EDC, 0x100 | (src & 0xf)); } -static struct irq_chip spider_pic = { - .typename = " SPIDER ", - .unmask = spider_unmask_irq, - .mask = spider_mask_irq, - .ack = spider_ack_irq, -}; - -static int spider_host_match(struct irq_host *h, struct device_node *node) -{ - struct spider_pic *pic = h->host_data; - return node == pic->of_node; -} - -static int spider_host_map(struct irq_host *h, unsigned int virq, - irq_hw_number_t hw, unsigned int flags) +static int spider_set_irq_type(unsigned int virq, unsigned int type) { - unsigned int sense = flags & IRQ_TYPE_SENSE_MASK; - struct spider_pic *pic = h->host_data; + unsigned int sense = type & IRQ_TYPE_SENSE_MASK; + struct spider_pic *pic = spider_virq_to_pic(virq); + unsigned int hw = irq_map[virq].hwirq; void __iomem *cfg = spider_get_irq_config(pic, hw); - int level = 0; + struct irq_desc *desc = get_irq_desc(virq); + u32 old_mask; u32 ic; /* Note that only level high is supported for most interrupts */ @@ -157,29 +139,57 @@ static int spider_host_map(struct irq_host *h, unsigned int virq, break; case IRQ_TYPE_LEVEL_LOW: ic = 0x0; - level = 1; break; case IRQ_TYPE_LEVEL_HIGH: case IRQ_TYPE_NONE: ic = 0x1; - level = 1; break; default: return -EINVAL; } + /* Update irq_desc */ + desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); + desc->status |= type & IRQ_TYPE_SENSE_MASK; + if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) + desc->status |= IRQ_LEVEL; + /* Configure the source. One gross hack that was there before and * that I've kept around is the priority to the BE which I set to * be the same as the interrupt source number. I don't know wether * that's supposed to make any kind of sense however, we'll have to * decide that, but for now, I'm not changing the behaviour. */ - out_be32(cfg, (ic << 24) | (0x7 << 16) | (pic->node_id << 4) | 0xe); + old_mask = in_be32(cfg) & 0x30000000u; + out_be32(cfg, old_mask | (ic << 24) | (0x7 << 16) | + (pic->node_id << 4) | 0xe); out_be32(cfg + 4, (0x2 << 16) | (hw & 0xff)); - if (level) - get_irq_desc(virq)->status |= IRQ_LEVEL; + return 0; +} + +static struct irq_chip spider_pic = { + .typename = " SPIDER ", + .unmask = spider_unmask_irq, + .mask = spider_mask_irq, + .ack = spider_ack_irq, + .set_type = spider_set_irq_type, +}; + +static int spider_host_match(struct irq_host *h, struct device_node *node) +{ + struct spider_pic *pic = h->host_data; + return node == pic->of_node; +} + +static int spider_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ set_irq_chip_and_handler(virq, &spider_pic, handle_level_irq); + + /* Set default irq type */ + set_irq_type(virq, IRQ_TYPE_NONE); + return 0; } @@ -283,7 +293,7 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic) if (iic_host == NULL) return NO_IRQ; /* Manufacture an IIC interrupt number of class 2 */ - virq = irq_create_mapping(iic_host, 0x20 | unit, 0); + virq = irq_create_mapping(iic_host, 0x20 | unit); if (virq == NO_IRQ) printk(KERN_ERR "spider_pic: failed to map cascade !"); return virq; diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 5d2313a6c82b..d06042deb021 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -583,9 +583,9 @@ static int __init spu_map_interrupts(struct spu *spu, struct device_node *np) spu->isrc = isrc = tmp[0]; /* Now map interrupts of all 3 classes */ - spu->irqs[0] = irq_create_mapping(host, 0x00 | isrc, 0); - spu->irqs[1] = irq_create_mapping(host, 0x10 | isrc, 0); - spu->irqs[2] = irq_create_mapping(host, 0x20 | isrc, 0); + spu->irqs[0] = irq_create_mapping(host, 0x00 | isrc); + spu->irqs[1] = irq_create_mapping(host, 0x10 | isrc); + spu->irqs[2] = irq_create_mapping(host, 0x20 | isrc); /* Right now, we only fail if class 2 failed */ return spu->irqs[2] == NO_IRQ ? -EINVAL : 0; diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c index 2275e64f3152..e32446877e78 100644 --- a/arch/powerpc/platforms/iseries/irq.c +++ b/arch/powerpc/platforms/iseries/irq.c @@ -300,7 +300,7 @@ int __init iSeries_allocate_IRQ(HvBusNumber bus, realirq = (((((sub_bus << 8) + (bus - 1)) << 3) + (idsel - 1)) << 3) + function; - return irq_create_mapping(NULL, realirq, IRQ_TYPE_NONE); + return irq_create_mapping(NULL, realirq); } #endif /* CONFIG_PCI */ @@ -341,7 +341,7 @@ unsigned int iSeries_get_irq(struct pt_regs *regs) } static int iseries_irq_host_map(struct irq_host *h, unsigned int virq, - irq_hw_number_t hw, unsigned int flags) + irq_hw_number_t hw) { set_irq_chip_and_handler(virq, &iseries_pic, handle_fasteoi_irq); diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 556b349797e8..205d04471161 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -24,10 +25,7 @@ #include #include #include -#ifdef CONFIG_PPC64 -//#include #include -#endif #undef DEBUG @@ -46,7 +44,6 @@ static int has_uninorth; static struct pci_controller *u3_agp; static struct pci_controller *u4_pcie; static struct pci_controller *u3_ht; -#define has_second_ohare 0 #else static int has_second_ohare; #endif /* CONFIG_PPC64 */ @@ -993,6 +990,7 @@ void __init pmac_pcibios_fixup(void) /* Read interrupt from the device-tree */ pci_read_irq_line(dev); +#ifdef CONFIG_PPC32 /* Fixup interrupt for the modem/ethernet combo controller. * on machines with a second ohare chip. * The number in the device tree (27) is bogus (correct for @@ -1002,8 +1000,11 @@ void __init pmac_pcibios_fixup(void) */ if (has_second_ohare && dev->vendor == PCI_VENDOR_ID_DEC && - dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS) - dev->irq = irq_create_mapping(NULL, 60, 0); + dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS) { + dev->irq = irq_create_mapping(NULL, 60); + set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW); + } +#endif /* CONFIG_PPC32 */ } } diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 3d328bc1f7e0..060789e31c67 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -291,7 +291,7 @@ static int pmac_pic_host_match(struct irq_host *h, struct device_node *node) } static int pmac_pic_host_map(struct irq_host *h, unsigned int virq, - irq_hw_number_t hw, unsigned int flags) + irq_hw_number_t hw) { struct irq_desc *desc = get_irq_desc(virq); int level; @@ -318,6 +318,7 @@ static int pmac_pic_host_xlate(struct irq_host *h, struct device_node *ct, unsigned int *out_flags) { + *out_flags = IRQ_TYPE_NONE; *out_hwirq = *intspec; return 0; } @@ -434,7 +435,7 @@ static void __init pmac_pic_probe_oldstyle(void) printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs); #ifdef CONFIG_XMON - setup_irq(irq_create_mapping(NULL, 20, 0), &xmon_action); + setup_irq(irq_create_mapping(NULL, 20), &xmon_action); #endif } #endif /* CONFIG_PPC32 */ @@ -579,9 +580,10 @@ void __init pmac_pic_init(void) flags |= OF_IMAP_OLDWORLD_MAC; if (get_property(of_chosen, "linux,bootx", NULL) != NULL) flags |= OF_IMAP_NO_PHANDLE; - of_irq_map_init(flags); #endif /* CONFIG_PPC_32 */ + of_irq_map_init(flags); + /* We first try to detect Apple's new Core99 chipset, since mac-io * is quite different on those machines and contains an IBM MPIC2. */ diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index 9df783088b61..c7ffde1a614e 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -93,8 +93,7 @@ static void request_ras_irqs(struct device_node *np, for (i = 0; i < opicplen; i++) { if (count > 15) break; - virqs[count] = irq_create_mapping(NULL, *(opicprop++), - IRQ_TYPE_NONE); + virqs[count] = irq_create_mapping(NULL, *(opicprop++)); if (virqs[count] == NO_IRQ) printk(KERN_ERR "Unable to allocate interrupt " "number for %s\n", np->full_name); diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index 716972aa9777..2d0da6f9e244 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -502,16 +502,9 @@ static int xics_host_match(struct irq_host *h, struct device_node *node) } static int xics_host_map_direct(struct irq_host *h, unsigned int virq, - irq_hw_number_t hw, unsigned int flags) + irq_hw_number_t hw) { - unsigned int sense = flags & IRQ_TYPE_SENSE_MASK; - - pr_debug("xics: map_direct virq %d, hwirq 0x%lx, flags: 0x%x\n", - virq, hw, flags); - - if (sense && sense != IRQ_TYPE_LEVEL_LOW) - printk(KERN_WARNING "xics: using unsupported sense 0x%x" - " for irq %d (h: 0x%lx)\n", flags, virq, hw); + pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw); get_irq_desc(virq)->status |= IRQ_LEVEL; set_irq_chip_and_handler(virq, &xics_pic_direct, handle_fasteoi_irq); @@ -519,16 +512,9 @@ static int xics_host_map_direct(struct irq_host *h, unsigned int virq, } static int xics_host_map_lpar(struct irq_host *h, unsigned int virq, - irq_hw_number_t hw, unsigned int flags) + irq_hw_number_t hw) { - unsigned int sense = flags & IRQ_TYPE_SENSE_MASK; - - pr_debug("xics: map_lpar virq %d, hwirq 0x%lx, flags: 0x%x\n", - virq, hw, flags); - - if (sense && sense != IRQ_TYPE_LEVEL_LOW) - printk(KERN_WARNING "xics: using unsupported sense 0x%x" - " for irq %d (h: 0x%lx)\n", flags, virq, hw); + pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw); get_irq_desc(virq)->status |= IRQ_LEVEL; set_irq_chip_and_handler(virq, &xics_pic_lpar, handle_fasteoi_irq); @@ -757,7 +743,7 @@ void xics_request_IPIs(void) { unsigned int ipi; - ipi = irq_create_mapping(xics_host, XICS_IPI, 0); + ipi = irq_create_mapping(xics_host, XICS_IPI); BUG_ON(ipi == NO_IRQ); /* @@ -782,6 +768,14 @@ void xics_teardown_cpu(int secondary) xics_set_cpu_priority(cpu, 0); + /* + * Clear IPI + */ + if (firmware_has_feature(FW_FEATURE_LPAR)) + lpar_qirr_info(cpu, 0xff); + else + direct_qirr_info(cpu, 0xff); + /* * we need to EOI the IPI if we got here from kexec down IPI * @@ -795,7 +789,7 @@ void xics_teardown_cpu(int secondary) return; desc = get_irq_desc(ipi); if (desc->chip && desc->chip->eoi) - desc->chip->eoi(XICS_IPI); + desc->chip->eoi(ipi); /* * Some machines need to have at least one cpu in the GIQ, diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c index 72c73a6105cd..9855820b9548 100644 --- a/arch/powerpc/sysdev/i8259.c +++ b/arch/powerpc/sysdev/i8259.c @@ -169,7 +169,7 @@ static int i8259_host_match(struct irq_host *h, struct device_node *node) } static int i8259_host_map(struct irq_host *h, unsigned int virq, - irq_hw_number_t hw, unsigned int flags) + irq_hw_number_t hw) { pr_debug("i8259_host_map(%d, 0x%lx)\n", virq, hw); @@ -177,7 +177,7 @@ static int i8259_host_map(struct irq_host *h, unsigned int virq, if (hw == 2) get_irq_desc(virq)->status |= IRQ_NOREQUEST; - /* We use the level stuff only for now, we might want to + /* We use the level handler only for now, we might want to * be more cautious here but that works for now */ get_irq_desc(virq)->status |= IRQ_LEVEL; diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 9cecebaa0360..c39c4a0b1cda 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -337,6 +337,17 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic) } } +#else /* CONFIG_MPIC_BROKEN_U3 */ + +static inline int mpic_is_ht_interrupt(struct mpic *mpic, unsigned int source) +{ + return 0; +} + +static void __init mpic_scan_ht_pics(struct mpic *mpic) +{ +} + #endif /* CONFIG_MPIC_BROKEN_U3 */ @@ -405,11 +416,9 @@ static void mpic_unmask_irq(unsigned int irq) unsigned int loops = 100000; struct mpic *mpic = mpic_from_irq(irq); unsigned int src = mpic_irq_to_hw(irq); - unsigned long flags; DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, irq, src); - spin_lock_irqsave(&mpic_lock, flags); mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI, mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & ~MPIC_VECPRI_MASK); @@ -420,7 +429,6 @@ static void mpic_unmask_irq(unsigned int irq) break; } } while(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK); - spin_unlock_irqrestore(&mpic_lock, flags); } static void mpic_mask_irq(unsigned int irq) @@ -428,11 +436,9 @@ static void mpic_mask_irq(unsigned int irq) unsigned int loops = 100000; struct mpic *mpic = mpic_from_irq(irq); unsigned int src = mpic_irq_to_hw(irq); - unsigned long flags; DBG("%s: disable_irq: %d (src %d)\n", mpic->name, irq, src); - spin_lock_irqsave(&mpic_lock, flags); mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI, mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) | MPIC_VECPRI_MASK); @@ -444,7 +450,6 @@ static void mpic_mask_irq(unsigned int irq) break; } } while(!(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK)); - spin_unlock_irqrestore(&mpic_lock, flags); } static void mpic_end_irq(unsigned int irq) @@ -512,8 +517,7 @@ static void mpic_end_ht_irq(unsigned int irq) mpic_ht_end_irq(mpic, src); mpic_eoi(mpic); } - -#endif /* CONFIG_MPIC_BROKEN_U3 */ +#endif /* !CONFIG_MPIC_BROKEN_U3 */ #ifdef CONFIG_SMP @@ -560,47 +564,74 @@ static void mpic_set_affinity(unsigned int irq, cpumask_t cpumask) mpic_physmask(cpus_addr(tmp)[0])); } -static unsigned int mpic_flags_to_vecpri(unsigned int flags, int *level) +static unsigned int mpic_type_to_vecpri(unsigned int type) { - unsigned int vecpri; - /* Now convert sense value */ - switch(flags & IRQ_TYPE_SENSE_MASK) { + switch(type & IRQ_TYPE_SENSE_MASK) { case IRQ_TYPE_EDGE_RISING: - vecpri = MPIC_VECPRI_SENSE_EDGE | - MPIC_VECPRI_POLARITY_POSITIVE; - *level = 0; - break; + return MPIC_VECPRI_SENSE_EDGE | MPIC_VECPRI_POLARITY_POSITIVE; case IRQ_TYPE_EDGE_FALLING: - vecpri = MPIC_VECPRI_SENSE_EDGE | - MPIC_VECPRI_POLARITY_NEGATIVE; - *level = 0; - break; + case IRQ_TYPE_EDGE_BOTH: + return MPIC_VECPRI_SENSE_EDGE | MPIC_VECPRI_POLARITY_NEGATIVE; case IRQ_TYPE_LEVEL_HIGH: - vecpri = MPIC_VECPRI_SENSE_LEVEL | - MPIC_VECPRI_POLARITY_POSITIVE; - *level = 1; - break; + return MPIC_VECPRI_SENSE_LEVEL | MPIC_VECPRI_POLARITY_POSITIVE; case IRQ_TYPE_LEVEL_LOW: default: - vecpri = MPIC_VECPRI_SENSE_LEVEL | - MPIC_VECPRI_POLARITY_NEGATIVE; - *level = 1; + return MPIC_VECPRI_SENSE_LEVEL | MPIC_VECPRI_POLARITY_NEGATIVE; } - return vecpri; +} + +static int mpic_set_irq_type(unsigned int virq, unsigned int flow_type) +{ + struct mpic *mpic = mpic_from_irq(virq); + unsigned int src = mpic_irq_to_hw(virq); + struct irq_desc *desc = get_irq_desc(virq); + unsigned int vecpri, vold, vnew; + + pr_debug("mpic: set_irq_type(mpic:@%p,virq:%d,src:%d,type:0x%x)\n", + mpic, virq, src, flow_type); + + if (src >= mpic->irq_count) + return -EINVAL; + + if (flow_type == IRQ_TYPE_NONE) + if (mpic->senses && src < mpic->senses_count) + flow_type = mpic->senses[src]; + if (flow_type == IRQ_TYPE_NONE) + flow_type = IRQ_TYPE_LEVEL_LOW; + + desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); + desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; + if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) + desc->status |= IRQ_LEVEL; + + if (mpic_is_ht_interrupt(mpic, src)) + vecpri = MPIC_VECPRI_POLARITY_POSITIVE | + MPIC_VECPRI_SENSE_EDGE; + else + vecpri = mpic_type_to_vecpri(flow_type); + + vold = mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI); + vnew = vold & ~(MPIC_VECPRI_POLARITY_MASK | MPIC_VECPRI_SENSE_MASK); + vnew |= vecpri; + if (vold != vnew) + mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI, vnew); + + return 0; } static struct irq_chip mpic_irq_chip = { - .mask = mpic_mask_irq, - .unmask = mpic_unmask_irq, - .eoi = mpic_end_irq, + .mask = mpic_mask_irq, + .unmask = mpic_unmask_irq, + .eoi = mpic_end_irq, + .set_type = mpic_set_irq_type, }; #ifdef CONFIG_SMP static struct irq_chip mpic_ipi_chip = { - .mask = mpic_mask_ipi, - .unmask = mpic_unmask_ipi, - .eoi = mpic_end_ipi, + .mask = mpic_mask_ipi, + .unmask = mpic_unmask_ipi, + .eoi = mpic_end_ipi, }; #endif /* CONFIG_SMP */ @@ -611,6 +642,7 @@ static struct irq_chip mpic_irq_ht_chip = { .mask = mpic_mask_irq, .unmask = mpic_unmask_ht_irq, .eoi = mpic_end_ht_irq, + .set_type = mpic_set_irq_type, }; #endif /* CONFIG_MPIC_BROKEN_U3 */ @@ -624,18 +656,12 @@ static int mpic_host_match(struct irq_host *h, struct device_node *node) } static int mpic_host_map(struct irq_host *h, unsigned int virq, - irq_hw_number_t hw, unsigned int flags) + irq_hw_number_t hw) { - struct irq_desc *desc = get_irq_desc(virq); - struct irq_chip *chip; struct mpic *mpic = h->host_data; - u32 v, vecpri = MPIC_VECPRI_SENSE_LEVEL | - MPIC_VECPRI_POLARITY_NEGATIVE; - int level; - unsigned long iflags; + struct irq_chip *chip; - pr_debug("mpic: map virq %d, hwirq 0x%lx, flags: 0x%x\n", - virq, hw, flags); + pr_debug("mpic: map virq %d, hwirq 0x%lx\n", virq, hw); if (hw == MPIC_VEC_SPURRIOUS) return -EINVAL; @@ -654,44 +680,23 @@ static int mpic_host_map(struct irq_host *h, unsigned int virq, if (hw >= mpic->irq_count) return -EINVAL; - /* If no sense provided, check default sense array */ - if (((flags & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_NONE) && - mpic->senses && hw < mpic->senses_count) - flags |= mpic->senses[hw]; - - vecpri = mpic_flags_to_vecpri(flags, &level); - if (level) - desc->status |= IRQ_LEVEL; + /* Default chip */ chip = &mpic->hc_irq; #ifdef CONFIG_MPIC_BROKEN_U3 /* Check for HT interrupts, override vecpri */ - if (mpic_is_ht_interrupt(mpic, hw)) { - vecpri &= ~(MPIC_VECPRI_SENSE_MASK | - MPIC_VECPRI_POLARITY_MASK); - vecpri |= MPIC_VECPRI_POLARITY_POSITIVE; + if (mpic_is_ht_interrupt(mpic, hw)) chip = &mpic->hc_ht_irq; - } -#endif +#endif /* CONFIG_MPIC_BROKEN_U3 */ - /* Reconfigure irq. We must preserve the mask bit as we can be called - * while the interrupt is still active (This may change in the future - * but for now, it is the case). - */ - spin_lock_irqsave(&mpic_lock, iflags); - v = mpic_irq_read(hw, MPIC_IRQ_VECTOR_PRI); - vecpri = (v & - ~(MPIC_VECPRI_POLARITY_MASK | MPIC_VECPRI_SENSE_MASK)) | - vecpri; - if (vecpri != v) - mpic_irq_write(hw, MPIC_IRQ_VECTOR_PRI, vecpri); - spin_unlock_irqrestore(&mpic_lock, iflags); - - pr_debug("mpic: mapping as IRQ, vecpri = 0x%08x (was 0x%08x)\n", - vecpri, v); + pr_debug("mpic: mapping to irq chip @%p\n", chip); set_irq_chip_data(virq, mpic); set_irq_chip_and_handler(virq, chip, handle_fasteoi_irq); + + /* Set default irq type */ + set_irq_type(virq, IRQ_TYPE_NONE); + return 0; } @@ -906,41 +911,16 @@ void __init mpic_init(struct mpic *mpic) if (mpic->irq_count == 0) mpic->irq_count = mpic->num_sources; -#ifdef CONFIG_MPIC_BROKEN_U3 /* Do the HT PIC fixups on U3 broken mpic */ DBG("MPIC flags: %x\n", mpic->flags); if ((mpic->flags & MPIC_BROKEN_U3) && (mpic->flags & MPIC_PRIMARY)) mpic_scan_ht_pics(mpic); -#endif /* CONFIG_MPIC_BROKEN_U3 */ for (i = 0; i < mpic->num_sources; i++) { /* start with vector = source number, and masked */ - u32 vecpri = MPIC_VECPRI_MASK | i | (8 << MPIC_VECPRI_PRIORITY_SHIFT); - int level = 1; + u32 vecpri = MPIC_VECPRI_MASK | i | + (8 << MPIC_VECPRI_PRIORITY_SHIFT); - /* do senses munging */ - if (mpic->senses && i < mpic->senses_count) - vecpri |= mpic_flags_to_vecpri(mpic->senses[i], - &level); - else - vecpri |= MPIC_VECPRI_SENSE_LEVEL; - - /* deal with broken U3 */ - if (mpic->flags & MPIC_BROKEN_U3) { -#ifdef CONFIG_MPIC_BROKEN_U3 - if (mpic_is_ht_interrupt(mpic, i)) { - vecpri &= ~(MPIC_VECPRI_SENSE_MASK | - MPIC_VECPRI_POLARITY_MASK); - vecpri |= MPIC_VECPRI_POLARITY_POSITIVE; - } -#else - printk(KERN_ERR "mpic: BROKEN_U3 set, but CONFIG doesn't match\n"); -#endif - } - - DBG("setup source %d, vecpri: %08x, level: %d\n", i, vecpri, - (level != 0)); - /* init hw */ mpic_irq_write(i, MPIC_IRQ_VECTOR_PRI, vecpri); mpic_irq_write(i, MPIC_IRQ_DESTINATION, @@ -1154,7 +1134,7 @@ void mpic_request_ipis(void) for (i = 0; i < 4; i++) { unsigned int vipi = irq_create_mapping(mpic->irqhost, - MPIC_VEC_IPI_0 + i, 0); + MPIC_VEC_IPI_0 + i); if (vipi == NO_IRQ) { printk(KERN_ERR "Failed to map IPI %d\n", i); break; diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c index 56612a2dca6b..41db8060e8f7 100644 --- a/drivers/char/hvsi.c +++ b/drivers/char/hvsi.c @@ -1299,7 +1299,7 @@ static int __init hvsi_console_init(void) hp->inbuf_end = hp->inbuf; hp->state = HVSI_CLOSED; hp->vtermno = *vtermno; - hp->virq = irq_create_mapping(NULL, irq[0], 0); + hp->virq = irq_create_mapping(NULL, irq[0]); if (hp->virq == NO_IRQ) { printk(KERN_ERR "%s: couldn't create irq mapping for 0x%x\n", __FUNCTION__, irq[0]); diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c index 80c0c665b5f6..82657bc86d19 100644 --- a/drivers/macintosh/macio_asic.c +++ b/drivers/macintosh/macio_asic.c @@ -330,7 +330,7 @@ static void macio_create_fixup_irq(struct macio_dev *dev, int index, { unsigned int irq; - irq = irq_create_mapping(NULL, line, 0); + irq = irq_create_mapping(NULL, line); if (irq != NO_IRQ) { dev->interrupt[index].start = irq; dev->interrupt[index].flags = IORESOURCE_IRQ; diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h index e05754752028..d903a62959da 100644 --- a/include/asm-powerpc/irq.h +++ b/include/asm-powerpc/irq.h @@ -83,25 +83,24 @@ struct irq_host_ops { int (*match)(struct irq_host *h, struct device_node *node); /* Create or update a mapping between a virtual irq number and a hw - * irq number. This can be called several times for the same mapping - * but with different flags, though unmap shall always be called - * before the virq->hw mapping is changed. + * irq number. This is called only once for a given mapping. */ - int (*map)(struct irq_host *h, unsigned int virq, - irq_hw_number_t hw, unsigned int flags); + int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw); /* Dispose of such a mapping */ void (*unmap)(struct irq_host *h, unsigned int virq); /* Translate device-tree interrupt specifier from raw format coming * from the firmware to a irq_hw_number_t (interrupt line number) and - * trigger flags that can be passed to irq_create_mapping(). - * If no translation is provided, raw format is assumed to be one cell - * for interrupt line and default sense. + * type (sense) that can be passed to set_irq_type(). In the absence + * of this callback, irq_create_of_mapping() and irq_of_parse_and_map() + * will return the hw number in the first cell and IRQ_TYPE_NONE for + * the type (which amount to keeping whatever default value the + * interrupt controller has for that line) */ int (*xlate)(struct irq_host *h, struct device_node *ctrler, u32 *intspec, unsigned int intsize, - irq_hw_number_t *out_hwirq, unsigned int *out_flags); + irq_hw_number_t *out_hwirq, unsigned int *out_type); }; struct irq_host { @@ -193,25 +192,14 @@ extern void irq_set_virq_count(unsigned int count); * irq_create_mapping - Map a hardware interrupt into linux virq space * @host: host owning this hardware interrupt or NULL for default host * @hwirq: hardware irq number in that host space - * @flags: flags passed to the controller. contains the trigger type among - * others. Use IRQ_TYPE_* defined in include/linux/irq.h * * Only one mapping per hardware interrupt is permitted. Returns a linux - * virq number. The flags can be used to provide sense information to the - * controller (typically extracted from the device-tree). If no information - * is passed, the controller defaults will apply (for example, xics can only - * do edge so flags are irrelevant for some pseries specific irqs). - * - * The device-tree generally contains the trigger info in an encoding that is - * specific to a given type of controller. In that case, you can directly use - * host->ops->trigger_xlate() to translate that. - * - * It is recommended that new PICs that don't have existing OF bindings chose - * to use a representation of triggers identical to linux. + * virq number. + * If the sense/trigger is to be specified, set_irq_type() should be called + * on the number returned from that call. */ extern unsigned int irq_create_mapping(struct irq_host *host, - irq_hw_number_t hwirq, - unsigned int flags); + irq_hw_number_t hwirq); /*** @@ -295,7 +283,7 @@ extern void irq_free_virt(unsigned int virq, unsigned int count); * * This function is identical to irq_create_mapping except that it takes * as input informations straight from the device-tree (typically the results - * of the of_irq_map_*() functions + * of the of_irq_map_*() functions. */ extern unsigned int irq_create_of_mapping(struct device_node *controller, u32 *intspec, unsigned int intsize); -- cgit v1.2.3 From 58d383a6222d66be9483598c51bae34e7d3c2c37 Mon Sep 17 00:00:00 2001 From: Segher Boessenkool Date: Mon, 10 Jul 2006 04:44:45 -0700 Subject: [PATCH] powerpc: make OF interrupt tree parsing more strict This patch fixes a bit of boundchecking in the new Open Firmware interrupt tree parsing code. It's important that it fails when things aren't correct in order to trigger fallback mecanisms that are necessary to make some machines work properly. Signed-off-by: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/prom_parse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc/kernel') diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 21009b1f7869..6a7e997c401d 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -881,7 +881,7 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq intsize = *tmp; /* Check index */ - if (index * intsize >= intlen) + if ((index + 1) * intsize > intlen) return -EINVAL; /* Get new specifier and map it */ -- cgit v1.2.3 From f0ca330bc4ce00377f940b786d7ec7d848dc4102 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 4 Jul 2006 14:06:29 +1000 Subject: [POWERPC] Workaround Pegasos incorrect ISA "ranges" The Pegasos firmware doesn't create a valid "ranges" property for the ISA bridge, thus causing translation of ISA addresses and IO ports to fail. This fixes it, thus re-enabling proper early serial console to work on Pegasos. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom_init.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'arch/powerpc/kernel') diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index ebd501a59abd..b6c3ac20c14c 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -2030,6 +2030,39 @@ static void __init fixup_device_tree_maple(void) #define fixup_device_tree_maple() #endif +#ifdef CONFIG_PPC_CHRP +/* Pegasos lacks the "ranges" property in the isa node */ +static void __init fixup_device_tree_chrp(void) +{ + phandle isa; + u32 isa_ranges[6]; + char *name; + int rc; + + name = "/pci@80000000/isa@c"; + isa = call_prom("finddevice", 1, 1, ADDR(name)); + if (!PHANDLE_VALID(isa)) + return; + + rc = prom_getproplen(isa, "ranges"); + if (rc != 0 && rc != PROM_ERROR) + return; + + prom_printf("Fixing up missing ISA range on Pegasos...\n"); + + isa_ranges[0] = 0x1; + isa_ranges[1] = 0x0; + isa_ranges[2] = 0x01006000; + isa_ranges[3] = 0x0; + isa_ranges[4] = 0x0; + isa_ranges[5] = 0x00010000; + prom_setprop(isa, name, "ranges", + isa_ranges, sizeof(isa_ranges)); +} +#else +#define fixup_device_tree_chrp() +#endif + #if defined(CONFIG_PPC64) && defined(CONFIG_PPC_PMAC) static void __init fixup_device_tree_pmac(void) { @@ -2077,6 +2110,7 @@ static void __init fixup_device_tree_pmac(void) static void __init fixup_device_tree(void) { fixup_device_tree_maple(); + fixup_device_tree_chrp(); fixup_device_tree_pmac(); } -- cgit v1.2.3 From 21bd2e6696bb5c8b32b00a0ea597f49bfda0ddc6 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 4 Jul 2006 14:07:42 +1000 Subject: [POWERPC] Fix 32 bits warning in prom_init.c A warning is hurting my eyes when building 32 bits kernels Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom_init.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/powerpc/kernel') diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index b6c3ac20c14c..462bced40c12 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -557,7 +557,9 @@ unsigned long prom_memparse(const char *ptr, const char **retptr) static void __init early_cmdline_parse(void) { struct prom_t *_prom = &RELOC(prom); +#ifdef CONFIG_PPC64 const char *opt; +#endif char *p; int l = 0; -- cgit v1.2.3 From 8cffc6ac66a2b251df2490702923611aa4ac1fc5 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 4 Jul 2006 14:09:36 +1000 Subject: [POWERPC] Fix non-MPIC CHRPs with CONFIG_SMP set Pseudo-CHRP machines like Pegasos without an MPIC would crash at boot if CONFIG_SMP was set because the "smp_ops" pointer was set to MPIC related ops unconditionally. This patch makes it NULL on machines that don't support SMP and provides proper default behaviour in the callers when smp_ops is NULL. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/smp.c | 24 +++++++++++++++++------- arch/powerpc/platforms/chrp/setup.c | 12 ++++++++---- 2 files changed, 25 insertions(+), 11 deletions(-) (limited to 'arch/powerpc/kernel') diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 46c56cfd1b2f..6a9bc9ce54e0 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -144,13 +144,15 @@ void smp_message_recv(int msg, struct pt_regs *regs) void smp_send_reschedule(int cpu) { - smp_ops->message_pass(cpu, PPC_MSG_RESCHEDULE); + if (likely(smp_ops)) + smp_ops->message_pass(cpu, PPC_MSG_RESCHEDULE); } #ifdef CONFIG_DEBUGGER void smp_send_debugger_break(int cpu) { - smp_ops->message_pass(cpu, PPC_MSG_DEBUGGER_BREAK); + if (likely(smp_ops)) + smp_ops->message_pass(cpu, PPC_MSG_DEBUGGER_BREAK); } #endif @@ -158,7 +160,7 @@ void smp_send_debugger_break(int cpu) void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *)) { crash_ipi_function_ptr = crash_ipi_callback; - if (crash_ipi_callback) { + if (crash_ipi_callback && smp_ops) { mb(); smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_DEBUGGER_BREAK); } @@ -220,6 +222,9 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, /* Can deadlock when called with interrupts disabled */ WARN_ON(irqs_disabled()); + if (unlikely(smp_ops == NULL)) + return -1; + data.func = func; data.info = info; atomic_set(&data.started, 0); @@ -357,7 +362,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus) smp_store_cpu_info(boot_cpuid); cpu_callin_map[boot_cpuid] = 1; - max_cpus = smp_ops->probe(); + if (smp_ops) + max_cpus = smp_ops->probe(); + else + max_cpus = 1; smp_space_timers(max_cpus); @@ -453,7 +461,7 @@ void generic_mach_cpu_die(void) static int __devinit cpu_enable(unsigned int cpu) { - if (smp_ops->cpu_enable) + if (smp_ops && smp_ops->cpu_enable) return smp_ops->cpu_enable(cpu); return -ENOSYS; @@ -467,7 +475,8 @@ int __devinit __cpu_up(unsigned int cpu) if (!cpu_enable(cpu)) return 0; - if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)) + if (smp_ops == NULL || + (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu))) return -EINVAL; /* Make sure callin-map entry is 0 (can be leftover a CPU @@ -568,7 +577,8 @@ void __init smp_cpus_done(unsigned int max_cpus) old_mask = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid)); - smp_ops->setup_cpu(boot_cpuid); + if (smp_ops) + smp_ops->setup_cpu(boot_cpuid); set_cpus_allowed(current, old_mask); diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 538e337d63e2..9c08ff322290 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -291,10 +291,6 @@ void __init chrp_setup_arch(void) pci_create_OF_bus_map(); -#ifdef CONFIG_SMP - smp_ops = &chrp_smp_ops; -#endif /* CONFIG_SMP */ - /* * Print the banner, then scroll down so boot progress * can be printed. -- Cort @@ -479,6 +475,14 @@ void __init chrp_init_IRQ(void) chrp_find_openpic(); chrp_find_8259(); +#ifdef CONFIG_SMP + /* Pegasos has no MPIC, those ops would make it crash. It might be an + * option to move setting them to after we probe the PIC though + */ + if (chrp_mpic != NULL) + smp_ops = &chrp_smp_ops; +#endif /* CONFIG_SMP */ + if (_chrp_type == _CHRP_Pegasos) ppc_md.get_irq = i8259_irq; -- cgit v1.2.3 From 171505dafef56e4c84c48399b36604f4be55cf36 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 4 Jul 2006 14:11:23 +1000 Subject: [POWERPC] Fix default clock for udbg_16550 This patch makes it possible to provide 0 as the clock value for udbg_16550, making it default to the standard 1.8432Mhz clock Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/udbg_16550.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch/powerpc/kernel') diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index 0835b4841dea..2d17f2b8eda7 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -81,10 +81,14 @@ static int udbg_550_getc(void) void udbg_init_uart(void __iomem *comport, unsigned int speed, unsigned int clock) { - unsigned int dll, base_bauds = clock / 16; + unsigned int dll, base_bauds; + if (clock == 0) + clock = 1843200; if (speed == 0) speed = 9600; + + base_bauds = clock / 16; dll = base_bauds / speed; if (comport) { -- cgit v1.2.3 From 45507ff3a2c58bc4781688eac1a80979ea972dce Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 4 Jul 2006 14:14:07 +1000 Subject: [POWERPC] Fix legacy_serial.c error handling on 32 bits The code in legacy_serial.c wouldn't properly compare OF translation results against OF_BAD_ADDR as it's using a phys_addr_t which is 32 bits on some 32-bit powerpc platforms. This fixes it by always using a u64 which is what is returned by the OF parsing routines. It also makes translation failure harmless for ISA serial ports. If they can't translate, we can't use the UART early, but we can still let the 8250 driver use it later on by using IO port accessors. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/legacy_serial.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'arch/powerpc/kernel') diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 7e98e778b52f..359ab89748e0 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -112,7 +112,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index, static int __init add_legacy_soc_port(struct device_node *np, struct device_node *soc_dev) { - phys_addr_t addr; + u64 addr; u32 *addrp; upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; @@ -143,7 +143,7 @@ static int __init add_legacy_isa_port(struct device_node *np, u32 *reg; char *typep; int index = -1; - phys_addr_t taddr; + u64 taddr; DBG(" -> add_legacy_isa_port(%s)\n", np->full_name); @@ -165,10 +165,13 @@ static int __init add_legacy_isa_port(struct device_node *np, if (typep && *typep == 'S') index = simple_strtol(typep+1, NULL, 0) - 1; - /* Translate ISA address */ + /* Translate ISA address. If it fails, we still register the port + * with no translated address so that it can be picked up as an IO + * port later by the serial driver + */ taddr = of_translate_address(np, reg); if (taddr == OF_BAD_ADDR) - return -1; + taddr = 0; /* Add port, irq will be dealt with later */ return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr, @@ -180,7 +183,7 @@ static int __init add_legacy_isa_port(struct device_node *np, static int __init add_legacy_pci_port(struct device_node *np, struct device_node *pci_dev) { - phys_addr_t addr, base; + u64 addr, base; u32 *addrp; unsigned int flags; int iotype, index = -1, lindex = 0; -- cgit v1.2.3 From 9fc0a92c7ebcad96467d62077497ce195d9b741c Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Wed, 19 Jul 2006 10:34:05 +0200 Subject: [POWERPC] force 64bit mode in fwnmi handlers to workaround firmware bugs The firmware of POWER4 and JS20 systems does not switch the cpu to 64bit mode when the registered system_reset and machine_check handlers get called. If a 32bit process runs on that cpu at the time of the event, the cpu remains in 32bit mode. xmon and kdump can not deal with it, the result is an error like 'Bad kernel stack pointer fff2aad0 at 3200'. xmon just loses some register info, but booting the kdump kernel usually fails. Both handlers are not hot paths. Duplicate the EXCEPTION_PROLOG_PSERIES macro and add two instructions to switch to 64bit: li r11,5; rldimi r10,r11,61,0; Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/head_64.S | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-) (limited to 'arch/powerpc/kernel') diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index e16eb2a33173..6ff3cf506088 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -191,6 +191,37 @@ exception_marker: ori reg,reg,(label)@l; /* virt addr of handler ... */ #endif +/* + * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode. + * The firmware calls the registered system_reset_fwnmi and + * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run + * a 32bit application at the time of the event. + * This firmware bug is present on POWER4 and JS20. + */ +#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label) \ + mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + std r9,area+EX_R9(r13); /* save r9 - r12 */ \ + std r10,area+EX_R10(r13); \ + std r11,area+EX_R11(r13); \ + std r12,area+EX_R12(r13); \ + mfspr r9,SPRN_SPRG1; \ + std r9,area+EX_R13(r13); \ + mfcr r9; \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + /* force 64bit mode */ \ + li r11,5; /* MSR_SF_LG|MSR_ISF_LG */ \ + rldimi r10,r11,61,0; /* insert into top 3 bits */ \ + /* done 64bit mode */ \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + #define EXCEPTION_PROLOG_PSERIES(area, label) \ mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ std r9,area+EX_R9(r13); /* save r9 - r12 */ \ @@ -604,14 +635,14 @@ slb_miss_user_pseries: system_reset_fwnmi: HMT_MEDIUM mtspr SPRN_SPRG1,r13 /* save r13 */ - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) + EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(PACA_EXGEN, system_reset_common) .globl machine_check_fwnmi .align 7 machine_check_fwnmi: HMT_MEDIUM mtspr SPRN_SPRG1,r13 /* save r13 */ - EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) + EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(PACA_EXMC, machine_check_common) #ifdef CONFIG_PPC_ISERIES /*** ISeries-LPAR interrupt handlers ***/ -- cgit v1.2.3 From 8d950cb8896fc95a9444d190885779438bb9d01c Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Tue, 25 Jul 2006 14:05:01 -0700 Subject: [POWERPC] Minor comment fix for misc_64.S A minor comment fix for misc_64.S from Takao Shinohara. Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/misc_64.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc/kernel') diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index bfb407fc1aa1..e3ed21cd3d94 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -687,7 +687,7 @@ _GLOBAL(kexec_sequence) /* clear out hardware hash page table and tlb */ ld r5,0(r27) /* deref function descriptor */ mtctr r5 - bctrl /* ppc_md.hash_clear_all(void); */ + bctrl /* ppc_md.hpte_clear_all(void); */ /* * kexec image calling is: -- cgit v1.2.3 From cea6a4ba8acfba6f59cc9ed71e0d05cb770b9d9c Mon Sep 17 00:00:00 2001 From: Horms Date: Sun, 30 Jul 2006 03:03:34 -0700 Subject: [PATCH] panic_on_oops: remove ssleep() This patch is part of an effort to unify the panic_on_oops behaviour across all architectures that implement it. It was pointed out to me by Andi Kleen that if an oops has occured in interrupt context, then calling sleep() in the oops path will only cause a panic, and that it would be really better for it not to be in the path at all. This patch removes the ssleep() call and reworks the console message accordinly. I have a slght concern that the resulting console message is too long, feedback welcome. For powerpc it also unifies the 32bit and 64bit behaviour. Fror x86_64, this patch only updates the console message, as ssleep() is already not present. Signed-off-by: Horms Acked-by: Paul Mackerras Cc: Russell King Cc: "Luck, Tony" Cc: Andi Kleen Cc: Chris Zankel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/kernel/traps.c | 7 ++----- arch/i386/kernel/traps.c | 8 +++----- arch/ia64/kernel/traps.c | 7 ++----- arch/powerpc/kernel/traps.c | 10 +++------- arch/x86_64/kernel/traps.c | 2 +- arch/xtensa/kernel/traps.c | 8 +++----- 6 files changed, 14 insertions(+), 28 deletions(-) (limited to 'arch/powerpc/kernel') diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 35a052fc177a..4e29dd03e582 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -232,11 +232,8 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err) bust_spinlocks(0); spin_unlock_irq(&die_lock); - if (panic_on_oops) { - printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n"); - ssleep(5); - panic("Fatal exception"); - } + if (panic_on_oops) + panic("Fatal exception: panic_on_oops"); do_exit(SIGSEGV); } diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index 021f8fdc7512..0d4005dc06c5 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -453,11 +453,9 @@ void die(const char * str, struct pt_regs * regs, long err) if (in_interrupt()) panic("Fatal exception in interrupt"); - if (panic_on_oops) { - printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n"); - ssleep(5); - panic("Fatal exception"); - } + if (panic_on_oops) + panic("Fatal exception: panic_on_oops"); + oops_exit(); do_exit(SIGSEGV); } diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c index e7bbb0f40aa2..5a0420464c6c 100644 --- a/arch/ia64/kernel/traps.c +++ b/arch/ia64/kernel/traps.c @@ -117,11 +117,8 @@ die (const char *str, struct pt_regs *regs, long err) die.lock_owner = -1; spin_unlock_irq(&die.lock); - if (panic_on_oops) { - printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n"); - ssleep(5); - panic("Fatal exception"); - } + if (panic_on_oops) + panic("Fatal exception: panic_on_oops"); do_exit(SIGSEGV); } diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 3c668078e524..2105767fcc57 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -150,13 +150,9 @@ int die(const char *str, struct pt_regs *regs, long err) if (in_interrupt()) panic("Fatal exception in interrupt"); - if (panic_on_oops) { -#ifdef CONFIG_PPC64 - printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n"); - ssleep(5); -#endif - panic("Fatal exception"); - } + if (panic_on_oops) + panic("Fatal exception: panic_on_oops"); + do_exit(err); return 0; diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c index f7a9d1421078..4e9938dee060 100644 --- a/arch/x86_64/kernel/traps.c +++ b/arch/x86_64/kernel/traps.c @@ -529,7 +529,7 @@ void __kprobes oops_end(unsigned long flags) /* Nest count reaches zero, release the lock. */ spin_unlock_irqrestore(&die_lock, flags); if (panic_on_oops) - panic("Oops"); + panic("Fatal exception: panic_on_oops"); } void __kprobes __die(const char * str, struct pt_regs * regs, long err) diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c index 27e409089a7b..9734960a2451 100644 --- a/arch/xtensa/kernel/traps.c +++ b/arch/xtensa/kernel/traps.c @@ -487,11 +487,9 @@ void die(const char * str, struct pt_regs * regs, long err) if (in_interrupt()) panic("Fatal exception in interrupt"); - if (panic_on_oops) { - printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n"); - ssleep(5); - panic("Fatal exception"); - } + if (panic_on_oops) + panic("Fatal exception: panic_on_oops"); + do_exit(err); } -- cgit v1.2.3 From 8c78f3075dab4be279e283f901f00e33ce44890a Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Sun, 30 Jul 2006 03:03:35 -0700 Subject: [PATCH] cpu hotplug: replace __devinit* with __cpuinit* for cpu notifications Few of the callback functions and notifier blocks that are associated with cpu notifications incorrectly have __devinit and __devinitdata. They should be __cpuinit and __cpuinitdata instead. It makes no functional difference but wastes text area when CONFIG_HOTPLUG is enabled and CONFIG_HOTPLUG_CPU is not. This patch fixes all those instances. Signed-off-by: Chandra Seetharaman Cc: Ashok Raj Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/sysfs.c | 4 ++-- kernel/hrtimer.c | 4 ++-- kernel/rcupdate.c | 4 ++-- kernel/softirq.c | 4 ++-- kernel/softlockup.c | 4 ++-- kernel/timer.c | 4 ++-- mm/slab.c | 2 +- 7 files changed, 13 insertions(+), 13 deletions(-) (limited to 'arch/powerpc/kernel') diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 010435095550..fec228cd0163 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -278,7 +278,7 @@ static void unregister_cpu_online(unsigned int cpu) } #endif /* CONFIG_HOTPLUG_CPU */ -static int __devinit sysfs_cpu_notify(struct notifier_block *self, +static int __cpuinit sysfs_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned int)(long)hcpu; @@ -296,7 +296,7 @@ static int __devinit sysfs_cpu_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __devinitdata sysfs_cpu_nb = { +static struct notifier_block __cpuinitdata sysfs_cpu_nb = { .notifier_call = sysfs_cpu_notify, }; diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index d17766d40dab..be989efc7856 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -835,7 +835,7 @@ static void migrate_hrtimers(int cpu) } #endif /* CONFIG_HOTPLUG_CPU */ -static int __devinit hrtimer_cpu_notify(struct notifier_block *self, +static int __cpuinit hrtimer_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { long cpu = (long)hcpu; @@ -859,7 +859,7 @@ static int __devinit hrtimer_cpu_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __devinitdata hrtimers_nb = { +static struct notifier_block __cpuinitdata hrtimers_nb = { .notifier_call = hrtimer_cpu_notify, }; diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c index 759805c9859a..436ab35f6fa7 100644 --- a/kernel/rcupdate.c +++ b/kernel/rcupdate.c @@ -548,7 +548,7 @@ static void __devinit rcu_online_cpu(int cpu) tasklet_init(&per_cpu(rcu_tasklet, cpu), rcu_process_callbacks, 0UL); } -static int __devinit rcu_cpu_notify(struct notifier_block *self, +static int __cpuinit rcu_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { long cpu = (long)hcpu; @@ -565,7 +565,7 @@ static int __devinit rcu_cpu_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __devinitdata rcu_nb = { +static struct notifier_block __cpuinitdata rcu_nb = { .notifier_call = rcu_cpu_notify, }; diff --git a/kernel/softirq.c b/kernel/softirq.c index 0f08a84ae307..aab880677ce0 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -547,7 +547,7 @@ static void takeover_tasklets(unsigned int cpu) } #endif /* CONFIG_HOTPLUG_CPU */ -static int __devinit cpu_callback(struct notifier_block *nfb, +static int __cpuinit cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { @@ -587,7 +587,7 @@ static int __devinit cpu_callback(struct notifier_block *nfb, return NOTIFY_OK; } -static struct notifier_block __devinitdata cpu_nfb = { +static struct notifier_block __cpuinitdata cpu_nfb = { .notifier_call = cpu_callback }; diff --git a/kernel/softlockup.c b/kernel/softlockup.c index 6b76caa22981..03e6a2b0b787 100644 --- a/kernel/softlockup.c +++ b/kernel/softlockup.c @@ -104,7 +104,7 @@ static int watchdog(void * __bind_cpu) /* * Create/destroy watchdog threads as CPUs come and go: */ -static int __devinit +static int __cpuinit cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { int hotcpu = (unsigned long)hcpu; @@ -142,7 +142,7 @@ cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) return NOTIFY_OK; } -static struct notifier_block __devinitdata cpu_nfb = { +static struct notifier_block __cpuinitdata cpu_nfb = { .notifier_call = cpu_callback }; diff --git a/kernel/timer.c b/kernel/timer.c index 05809c2e2fd6..ee319fc69f40 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1688,7 +1688,7 @@ static void __devinit migrate_timers(int cpu) } #endif /* CONFIG_HOTPLUG_CPU */ -static int __devinit timer_cpu_notify(struct notifier_block *self, +static int __cpuinit timer_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { long cpu = (long)hcpu; @@ -1708,7 +1708,7 @@ static int __devinit timer_cpu_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __devinitdata timers_nb = { +static struct notifier_block __cpuinitdata timers_nb = { .notifier_call = timer_cpu_notify, }; diff --git a/mm/slab.c b/mm/slab.c index 0f20843beffd..252972ff6495 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -1106,7 +1106,7 @@ static inline int cache_free_alien(struct kmem_cache *cachep, void *objp) #endif -static int __devinit cpuup_callback(struct notifier_block *nfb, +static int __cpuinit cpuup_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { long cpu = (long)hcpu; -- cgit v1.2.3 From 0b0bf7a3ccb6f0b38ead71980e79f875046047b7 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Sun, 30 Jul 2006 03:04:06 -0700 Subject: [PATCH] vDSO hash-style fix The latest toolchains can produce a new ELF section in DSOs and dynamically-linked executables. The new section ".gnu.hash" replaces ".hash", and allows for more efficient runtime symbol lookups by the dynamic linker. The new ld option --hash-style={sysv|gnu|both} controls whether to produce the old ".hash", the new ".gnu.hash", or both. In some new systems such as Fedora Core 6, gcc by default passes --hash-style=gnu to the linker, so that a standard invocation of "gcc -shared" results in producing a DSO with only ".gnu.hash". The new ".gnu.hash" sections need to be dealt with the same way as ".hash" sections in all respects; only the dynamic linker cares about their contents. To work with older dynamic linkers (i.e. preexisting releases of glibc), a binary must have the old ".hash" section. The --hash-style=both option produces binaries that a new dynamic linker can use more efficiently, but an old dynamic linker can still handle. The new section runs afoul of the custom linker scripts used to build vDSO images for the kernel. On ia64, the failure mode for this is a boot-time panic because the vDSO's PT_IA_64_UNWIND segment winds up ill-formed. This patch addresses the problem in two ways. First, it mentions ".gnu.hash" in all the linker scripts alongside ".hash". This produces correct vDSO images with --hash-style=sysv (or old tools), with --hash-style=gnu, or with --hash-style=both. Second, it passes the --hash-style=sysv option when building the vDSO images, so that ".gnu.hash" is not actually produced. This is the most conservative choice for compatibility with any old userland. There is some concern that some ancient glibc builds (though not any known old production system) might choke on --hash-style=both binaries. The optimizations provided by the new style of hash section do not really matter for a DSO with a tiny number of symbols, as the vDSO has. If someone wants to use =gnu or =both for their vDSO builds and worry less about that compatibility, just change the option and the linker script changes will make any choice work fine. Signed-off-by: Roland McGrath Cc: "Luck, Tony" Cc: Kyle McMartin Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Jeff Dike Cc: Andi Kleen Cc: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/kbuild/makefiles.txt | 14 ++++++++++++++ arch/i386/kernel/Makefile | 3 ++- arch/i386/kernel/vsyscall.lds.S | 1 + arch/ia64/kernel/Makefile | 3 ++- arch/ia64/kernel/gate.lds.S | 1 + arch/parisc/kernel/vmlinux.lds.S | 1 + arch/powerpc/kernel/vdso32/Makefile | 3 ++- arch/powerpc/kernel/vdso32/vdso32.lds.S | 1 + arch/powerpc/kernel/vdso64/Makefile | 3 ++- arch/powerpc/kernel/vdso64/vdso64.lds.S | 1 + arch/ppc/kernel/vmlinux.lds.S | 1 + arch/um/kernel/dyn.lds.S | 1 + arch/x86_64/ia32/Makefile | 1 + arch/x86_64/ia32/vsyscall.lds | 1 + scripts/Kbuild.include | 7 +++++++ 15 files changed, 38 insertions(+), 4 deletions(-) (limited to 'arch/powerpc/kernel') diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index 14ef3868a328..0706699c9da9 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -407,6 +407,20 @@ more details, with real examples. The second argument is optional, and if supplied will be used if first argument is not supported. + ld-option + ld-option is used to check if $(CC) when used to link object files + supports the given option. An optional second option may be + specified if first option are not supported. + + Example: + #arch/i386/kernel/Makefile + vsyscall-flags += $(call ld-option, -Wl$(comma)--hash-style=sysv) + + In the above example vsyscall-flags will be assigned the option + -Wl$(comma)--hash-style=sysv if it is supported by $(CC). + The second argument is optional, and if supplied will be used + if first argument is not supported. + cc-option cc-option is used to check if $(CC) support a given option, and not supported to use an optional second option. diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 1b452a1665c4..ab98fc21a541 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -59,7 +59,8 @@ quiet_cmd_syscall = SYSCALL $@ export CPPFLAGS_vsyscall.lds += -P -C -U$(ARCH) -vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 +vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \ + $(call ld-option, -Wl$(comma)--hash-style=sysv) SYSCFLAGS_vsyscall-sysenter.so = $(vsyscall-flags) SYSCFLAGS_vsyscall-int80.so = $(vsyscall-flags) diff --git a/arch/i386/kernel/vsyscall.lds.S b/arch/i386/kernel/vsyscall.lds.S index e26975fc68b6..f66cd11adb72 100644 --- a/arch/i386/kernel/vsyscall.lds.S +++ b/arch/i386/kernel/vsyscall.lds.S @@ -10,6 +10,7 @@ SECTIONS . = VDSO_PRELINK + SIZEOF_HEADERS; .hash : { *(.hash) } :text + .gnu.hash : { *(.gnu.hash) } .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .gnu.version : { *(.gnu.version) } diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index 0e4553f320bf..ad8215a3c586 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -45,7 +45,8 @@ CPPFLAGS_gate.lds := -P -C -U$(ARCH) quiet_cmd_gate = GATE $@ cmd_gate = $(CC) -nostdlib $(GATECFLAGS_$(@F)) -Wl,-T,$(filter-out FORCE,$^) -o $@ -GATECFLAGS_gate.so = -shared -s -Wl,-soname=linux-gate.so.1 +GATECFLAGS_gate.so = -shared -s -Wl,-soname=linux-gate.so.1 \ + $(call ld-option, -Wl$(comma)--hash-style=sysv) $(obj)/gate.so: $(obj)/gate.lds $(obj)/gate.o FORCE $(call if_changed,gate) diff --git a/arch/ia64/kernel/gate.lds.S b/arch/ia64/kernel/gate.lds.S index cc35cddfd4cf..6d198339bf85 100644 --- a/arch/ia64/kernel/gate.lds.S +++ b/arch/ia64/kernel/gate.lds.S @@ -12,6 +12,7 @@ SECTIONS . = GATE_ADDR + SIZEOF_HEADERS; .hash : { *(.hash) } :readable + .gnu.hash : { *(.gnu.hash) } .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .gnu.version : { *(.gnu.version) } diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index 9989495a51dd..b3677fc8eef5 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -204,6 +204,7 @@ SECTIONS *(.dynstr) *(.dynamic) *(.hash) + *(.gnu.hash) #endif } diff --git a/arch/powerpc/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile index 8a3bed5f143a..3726358faae8 100644 --- a/arch/powerpc/kernel/vdso32/Makefile +++ b/arch/powerpc/kernel/vdso32/Makefile @@ -14,7 +14,8 @@ obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32)) EXTRA_CFLAGS := -shared -s -fno-common -fno-builtin -EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso32.so.1 +EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso32.so.1 \ + $(call ld-option, -Wl$(comma)--hash-style=sysv) EXTRA_AFLAGS := -D__VDSO32__ -s obj-y += vdso32_wrapper.o diff --git a/arch/powerpc/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S index f4bad720cb0a..6187af2d54c3 100644 --- a/arch/powerpc/kernel/vdso32/vdso32.lds.S +++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S @@ -14,6 +14,7 @@ SECTIONS { . = VDSO32_LBASE + SIZEOF_HEADERS; .hash : { *(.hash) } :text + .gnu.hash : { *(.gnu.hash) } .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .gnu.version : { *(.gnu.version) } diff --git a/arch/powerpc/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile index ab39988452cc..43af9b2a6f3b 100644 --- a/arch/powerpc/kernel/vdso64/Makefile +++ b/arch/powerpc/kernel/vdso64/Makefile @@ -8,7 +8,8 @@ targets := $(obj-vdso64) vdso64.so obj-vdso64 := $(addprefix $(obj)/, $(obj-vdso64)) EXTRA_CFLAGS := -shared -s -fno-common -fno-builtin -EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso64.so.1 +EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso64.so.1 \ + $(call ld-option, -Wl$(comma)--hash-style=sysv) EXTRA_AFLAGS := -D__VDSO64__ -s obj-y += vdso64_wrapper.o diff --git a/arch/powerpc/kernel/vdso64/vdso64.lds.S b/arch/powerpc/kernel/vdso64/vdso64.lds.S index 4bdf224464ab..4a2b6dc0960c 100644 --- a/arch/powerpc/kernel/vdso64/vdso64.lds.S +++ b/arch/powerpc/kernel/vdso64/vdso64.lds.S @@ -12,6 +12,7 @@ SECTIONS { . = VDSO64_LBASE + SIZEOF_HEADERS; .hash : { *(.hash) } :text + .gnu.hash : { *(.gnu.hash) } .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .gnu.version : { *(.gnu.version) } diff --git a/arch/ppc/kernel/vmlinux.lds.S b/arch/ppc/kernel/vmlinux.lds.S index 09c6525cfa61..095fd3323323 100644 --- a/arch/ppc/kernel/vmlinux.lds.S +++ b/arch/ppc/kernel/vmlinux.lds.S @@ -8,6 +8,7 @@ SECTIONS . = + SIZEOF_HEADERS; .interp : { *(.interp) } .hash : { *(.hash) } + .gnu.hash : { *(.gnu.hash) } .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .rel.text : { *(.rel.text) } diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S index 2517ecb8bf27..68ed24df5c8f 100644 --- a/arch/um/kernel/dyn.lds.S +++ b/arch/um/kernel/dyn.lds.S @@ -26,6 +26,7 @@ SECTIONS /* Read-only sections, merged into text segment: */ .hash : { *(.hash) } + .gnu.hash : { *(.gnu.hash) } .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .gnu.version : { *(.gnu.version) } diff --git a/arch/x86_64/ia32/Makefile b/arch/x86_64/ia32/Makefile index 62bc5f56da9e..cdae36435e21 100644 --- a/arch/x86_64/ia32/Makefile +++ b/arch/x86_64/ia32/Makefile @@ -23,6 +23,7 @@ targets := $(foreach F,sysenter syscall,vsyscall-$F.o vsyscall-$F.so) # The DSO images are built using a special linker script quiet_cmd_syscall = SYSCALL $@ cmd_syscall = $(CC) -m32 -nostdlib -shared -s \ + $(call ld-option, -Wl$(comma)--hash-style=sysv) \ -Wl,-soname=linux-gate.so.1 -o $@ \ -Wl,-T,$(filter-out FORCE,$^) diff --git a/arch/x86_64/ia32/vsyscall.lds b/arch/x86_64/ia32/vsyscall.lds index f2e75ed4c6c7..1dc86ff5bcb9 100644 --- a/arch/x86_64/ia32/vsyscall.lds +++ b/arch/x86_64/ia32/vsyscall.lds @@ -11,6 +11,7 @@ SECTIONS . = VSYSCALL_BASE + SIZEOF_HEADERS; .hash : { *(.hash) } :text + .gnu.hash : { *(.gnu.hash) } .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .gnu.version : { *(.gnu.version) } diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index 2180c88cfe89..f01132263535 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -85,6 +85,13 @@ cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh \ cc-ifversion = $(shell if [ $(call cc-version, $(CC)) $(1) $(2) ]; then \ echo $(3); fi;) +# ld-option +# Usage: ldflags += $(call ld-option, -Wl$(comma)--hash-style=both) +ld-option = $(shell if $(CC) $(1) \ + -nostdlib -o ldtest$$$$.out -xc /dev/null \ + > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi; \ + rm -f ldtest$$$$.out) + ### # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj= # Usage: -- cgit v1.2.3