From 2fd6f58ba6efc82ea2c9c2630f7ff5ed9eeaf34a Mon Sep 17 00:00:00 2001 From: Date: Fri, 29 Apr 2005 16:08:28 +0100 Subject: [AUDIT] Don't allow ptrace to fool auditing, log arch of audited syscalls. We were calling ptrace_notify() after auditing the syscall and arguments, but the debugger could have _changed_ them before the syscall was actually invoked. Reorder the calls to fix that. While we're touching ever call to audit_syscall_entry(), we also make it take an extra argument: the architecture of the syscall which was made, because some architectures allow more than one type of syscall. Also add an explicit success/failure flag to audit_syscall_exit(), for the benefit of architectures which return that in a condition register rather than only returning a single register. Change type of syscall return value to 'long' not 'int'. Signed-off-by: David Woodhouse --- arch/ppc64/kernel/ptrace.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/ptrace.c b/arch/ppc64/kernel/ptrace.c index 354a287c67eb..3c76333ec3a9 100644 --- a/arch/ppc64/kernel/ptrace.c +++ b/arch/ppc64/kernel/ptrace.c @@ -304,14 +304,17 @@ static void do_syscall_trace(void) void do_syscall_trace_enter(struct pt_regs *regs) { + if (test_thread_flag(TIF_SYSCALL_TRACE) + && (current->ptrace & PT_PTRACED)) + do_syscall_trace(); + if (unlikely(current->audit_context)) - audit_syscall_entry(current, regs->gpr[0], + audit_syscall_entry(current, + test_thread_flag(TIF_32BIT)?AUDIT_ARCH_PPC:AUDIT_ARCH_PPC64, + regs->gpr[0], regs->gpr[3], regs->gpr[4], regs->gpr[5], regs->gpr[6]); - if (test_thread_flag(TIF_SYSCALL_TRACE) - && (current->ptrace & PT_PTRACED)) - do_syscall_trace(); } void do_syscall_trace_leave(struct pt_regs *regs) @@ -319,7 +322,9 @@ void do_syscall_trace_leave(struct pt_regs *regs) secure_computing(regs->gpr[0]); if (unlikely(current->audit_context)) - audit_syscall_exit(current, regs->result); + audit_syscall_exit(current, + (regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, + regs->result); if ((test_thread_flag(TIF_SYSCALL_TRACE) || test_thread_flag(TIF_SINGLESTEP)) -- cgit v1.2.3 From 5cae841b13f23ccdf7e38b2400b5cf57deb57ccf Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 4 May 2005 05:39:22 +0100 Subject: [PATCH] ISA DMA Kconfig fixes - part 1 A bunch of drivers use ISA DMA helpers or their equivalents for platforms that have ISA with different DMA controller (a lot of ARM boxen). Currently there is no way to put such dependency in Kconfig - CONFIG_ISA is not it (e.g. it is not set on platforms that have no ISA slots, but have on-board devices that pretend to be ISA ones). New symbol added - ISA_DMA_API. Set when we have functional enable_dma()/set_dma_mode()/etc. set of helpers. Next patches in the series will add missing dependencies for drivers that need them. I'm very carefully staying the hell out of the recurring flamefest on what exactly CONFIG_ISA would mean in ideal world - added symbol has a well-defined meaning and for now I really want to treat it as completely independent from the mess around CONFIG_ISA. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/alpha/Kconfig | 4 ++++ arch/arm/Kconfig | 4 ++++ arch/arm26/Kconfig | 4 ++++ arch/i386/Kconfig | 4 ++++ arch/m68knommu/Kconfig | 5 +++++ arch/mips/Kconfig | 4 ++++ arch/parisc/Kconfig | 4 ++++ arch/ppc/Kconfig | 4 ++++ arch/ppc64/Kconfig | 3 +++ arch/sh/Kconfig | 4 ++++ arch/x86_64/Kconfig | 5 +++++ 11 files changed, 45 insertions(+) (limited to 'arch/ppc64') diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 0c79b9d95f74..f7c96635d3b4 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -280,6 +280,10 @@ config ISA (MCA) or VESA. ISA is an older system, now being displaced by PCI; newer boards don't support it. If you have ISA, say Y, otherwise N. +config ISA_DMA_API + bool + default y + config PCI bool depends on !ALPHA_JENSEN diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4055115ae0e2..8bfcb37460fa 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -266,6 +266,10 @@ config ISA_DMA depends on FOOTBRIDGE_HOST || ARCH_SHARK default y +config ISA_DMA_API + bool + default y + config PCI bool "PCI support" if ARCH_INTEGRATOR_AP default y if ARCH_SHARK || FOOTBRIDGE_HOST || ARCH_IOP3XX || ARCH_IXP4XX || ARCH_IXP2000 diff --git a/arch/arm26/Kconfig b/arch/arm26/Kconfig index 3955de5af4c0..6caed90661fc 100644 --- a/arch/arm26/Kconfig +++ b/arch/arm26/Kconfig @@ -89,6 +89,10 @@ config PAGESIZE_16 machine with 4MB of memory. endmenu +config ISA_DMA_API + bool + default y + menu "General setup" # Compressed boot loader in ROM. Yes, we really want to ask about diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 99b4f294a52d..fee589119606 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -1173,6 +1173,10 @@ source "drivers/pci/pcie/Kconfig" source "drivers/pci/Kconfig" +config ISA_DMA_API + bool + default y + config ISA bool "ISA support" depends on !(X86_VOYAGER || X86_VISWS) diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index fc4615b6d3a9..e729bd280623 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -534,6 +534,11 @@ endchoice endmenu +config ISA_DMA_API + bool + depends on !M5272 + default y + menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)" config PCI diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 5e666aad8815..ab9944693f1f 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1656,3 +1656,7 @@ config GENERIC_HARDIRQS config GENERIC_IRQ_PROBE bool default y + +config ISA_DMA_API + bool + default y diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 5b5cd00d98ca..e7e7c56fc212 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -45,6 +45,10 @@ config GENERIC_IRQ_PROBE config PM bool +config ISA_DMA_API + bool + default y + source "init/Kconfig" diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index c3d941345e3d..ff04dcd30200 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -1079,6 +1079,10 @@ source kernel/power/Kconfig endmenu +config ISA_DMA_API + bool + default y + menu "Bus options" config ISA diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index ef1f05e437c4..f5508abf1188 100644 --- a/arch/ppc64/Kconfig +++ b/arch/ppc64/Kconfig @@ -293,6 +293,9 @@ config SECCOMP endmenu +config ISA_DMA_API + bool + default y menu "General setup" diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 722ea1d63c94..3468d5127223 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -693,6 +693,10 @@ config RTC_9701JE endmenu +config ISA_DMA_API + bool + depends on MPC1211 + default y menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)" diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 80c38c5d71fe..44ee7f6acf7b 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -379,6 +379,11 @@ config GENERIC_IRQ_PROBE bool default y +# we have no ISA slots, but we do have ISA-style DMA. +config ISA_DMA_API + bool + default y + menu "Power management options" source kernel/power/Kconfig -- cgit v1.2.3 From 7d12e522ba13ce718b7ec32b75803dece8adb072 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 5 May 2005 16:15:11 -0700 Subject: [PATCH] ppc64: remove hidden -fno-omit-frame-pointer for schedule.c While looking at code generated by gcc4.0 I noticed some functions still had frame pointers, even after we stopped ppc64 from defining CONFIG_FRAME_POINTER. It turns out kernel/Makefile hardwires -fno-omit-frame-pointer on when compiling schedule.c. Create CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER and define it on architectures that dont require frame pointers in sched.c code. (akpm: blame me for the name) Signed-off-by: Anton Blanchard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/Kconfig | 4 ++++ arch/ppc/Kconfig | 4 ++++ arch/ppc64/Kconfig | 4 ++++ kernel/Makefile | 2 +- 4 files changed, 13 insertions(+), 1 deletion(-) (limited to 'arch/ppc64') diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index ce13ad689d19..3ad2c4af099c 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -46,6 +46,10 @@ config GENERIC_IOMAP bool default y +config SCHED_NO_NO_OMIT_FRAME_POINTER + bool + default y + choice prompt "System type" default IA64_GENERIC diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index ff04dcd30200..d0d94e56b90b 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -43,6 +43,10 @@ config GENERIC_NVRAM bool default y +config SCHED_NO_NO_OMIT_FRAME_POINTER + bool + default y + source "init/Kconfig" menu "Processor" diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index f5508abf1188..257ff66d83cf 100644 --- a/arch/ppc64/Kconfig +++ b/arch/ppc64/Kconfig @@ -40,6 +40,10 @@ config COMPAT bool default y +config SCHED_NO_NO_OMIT_FRAME_POINTER + bool + default y + # We optimistically allocate largepages from the VM, so make the limit # large enough (16MB). This badly named config option is actually # max order + 1 diff --git a/kernel/Makefile b/kernel/Makefile index eb88b446c2cc..b01d26fe8db7 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -29,7 +29,7 @@ obj-$(CONFIG_SYSFS) += ksysfs.o obj-$(CONFIG_GENERIC_HARDIRQS) += irq/ obj-$(CONFIG_SECCOMP) += seccomp.o -ifneq ($(CONFIG_IA64),y) +ifneq ($(CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER),y) # According to Alan Modra , the -fno-omit-frame-pointer is # needed for x86 only. Why this used to be enabled for all architectures is beyond # me. I suspect most platforms don't need this, but until we know that for sure -- cgit v1.2.3 From e685752de107201432a055f7c45c396a5b04dc17 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 5 May 2005 16:15:12 -0700 Subject: [PATCH] ppc64: add missing Kconfig help text There's no help text for CONFIG_DEBUG_STACKOVERFLOW - add one. Signed-off-by: Jesper Juhl Signed-off-by: Anton Blanchard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc64/Kconfig.debug | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/ppc64') diff --git a/arch/ppc64/Kconfig.debug b/arch/ppc64/Kconfig.debug index e341a129da80..46b1ce58da3b 100644 --- a/arch/ppc64/Kconfig.debug +++ b/arch/ppc64/Kconfig.debug @@ -5,6 +5,9 @@ source "lib/Kconfig.debug" config DEBUG_STACKOVERFLOW bool "Check for stack overflows" depends on DEBUG_KERNEL + help + This option will cause messages to be printed if free stack space + drops below a certain limit. config KPROBES bool "Kprobes" -- cgit v1.2.3 From 1f8d419e291f7f7f7f3ffd4f0ba00834621690c8 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 5 May 2005 16:15:13 -0700 Subject: [PATCH] ppc64: pgtable.h and other header cleanups This patch started as simply removing a few never-used macros from asm-ppc64/pgtable.h, then kind of grew. It now makes a bunch of cleanups to the ppc64 low-level header files (with corresponding changes to .c files where necessary) such as: - Abolishing never-used macros - Eliminating multiple #defines with the same purpose - Removing pointless macros (cases where just expanding the macro everywhere turns out clearer and more sensible) - Removing some cases where macros which could be defined in terms of each other weren't - Moving imalloc() related definitions from pgtable.h to their own header file (imalloc.h) - Re-arranging headers to group things more logically - Moving all VSID allocation related things to mmu.h, instead of being split between mmu.h and mmu_context.h - Removing some reserved space for flags from the PMD - we're not using it. - Fix some bugs which broke compile with STRICT_MM_TYPECHECKS. Signed-off-by: David Gibson Acked-by: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/pci.c | 2 +- arch/ppc64/mm/hash_native.c | 3 +- arch/ppc64/mm/hash_utils.c | 11 ++- arch/ppc64/mm/imalloc.c | 5 +- arch/ppc64/mm/init.c | 1 + arch/ppc64/mm/stab.c | 5 ++ include/asm-ppc64/imalloc.h | 24 +++++ include/asm-ppc64/mmu.h | 193 ++++++++++++++++++++++++++++++---------- include/asm-ppc64/mmu_context.h | 82 ----------------- include/asm-ppc64/page.h | 15 ++-- include/asm-ppc64/pgtable.h | 117 ++++++------------------ 11 files changed, 219 insertions(+), 239 deletions(-) create mode 100644 include/asm-ppc64/imalloc.h (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/pci.c b/arch/ppc64/kernel/pci.c index be3cc387c1ec..d786d4b6af0b 100644 --- a/arch/ppc64/kernel/pci.c +++ b/arch/ppc64/kernel/pci.c @@ -438,7 +438,7 @@ pgprot_t pci_phys_mem_access_prot(struct file *file, int i; if (page_is_ram(offset >> PAGE_SHIFT)) - return prot; + return __pgprot(prot); prot |= _PAGE_NO_CACHE | _PAGE_GUARDED; diff --git a/arch/ppc64/mm/hash_native.c b/arch/ppc64/mm/hash_native.c index 144657e0c3d5..52b6b9305341 100644 --- a/arch/ppc64/mm/hash_native.c +++ b/arch/ppc64/mm/hash_native.c @@ -320,8 +320,7 @@ static void native_flush_hash_range(unsigned long context, j = 0; for (i = 0; i < number; i++) { - if ((batch->addr[i] >= USER_START) && - (batch->addr[i] <= USER_END)) + if (batch->addr[i] < KERNELBASE) vsid = get_vsid(context, batch->addr[i]); else vsid = get_kernel_vsid(batch->addr[i]); diff --git a/arch/ppc64/mm/hash_utils.c b/arch/ppc64/mm/hash_utils.c index e48be12f518c..0a0f97008d02 100644 --- a/arch/ppc64/mm/hash_utils.c +++ b/arch/ppc64/mm/hash_utils.c @@ -298,24 +298,23 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) int local = 0; cpumask_t tmp; + if ((ea & ~REGION_MASK) > EADDR_MASK) + return 1; + switch (REGION_ID(ea)) { case USER_REGION_ID: user_region = 1; mm = current->mm; - if ((ea > USER_END) || (! mm)) + if (! mm) return 1; vsid = get_vsid(mm->context.id, ea); break; case IO_REGION_ID: - if (ea > IMALLOC_END) - return 1; mm = &ioremap_mm; vsid = get_kernel_vsid(ea); break; case VMALLOC_REGION_ID: - if (ea > VMALLOC_END) - return 1; mm = &init_mm; vsid = get_kernel_vsid(ea); break; @@ -362,7 +361,7 @@ void flush_hash_page(unsigned long context, unsigned long ea, pte_t pte, unsigned long vsid, vpn, va, hash, secondary, slot; unsigned long huge = pte_huge(pte); - if ((ea >= USER_START) && (ea <= USER_END)) + if (ea < KERNELBASE) vsid = get_vsid(context, ea); else vsid = get_kernel_vsid(ea); diff --git a/arch/ppc64/mm/imalloc.c b/arch/ppc64/mm/imalloc.c index 9d92b0d9cde5..cb8727f3267a 100644 --- a/arch/ppc64/mm/imalloc.c +++ b/arch/ppc64/mm/imalloc.c @@ -14,6 +14,7 @@ #include #include #include +#include static DECLARE_MUTEX(imlist_sem); struct vm_struct * imlist = NULL; @@ -23,11 +24,11 @@ static int get_free_im_addr(unsigned long size, unsigned long *im_addr) unsigned long addr; struct vm_struct **p, *tmp; - addr = IMALLOC_START; + addr = ioremap_bot; for (p = &imlist; (tmp = *p) ; p = &tmp->next) { if (size + addr < (unsigned long) tmp->addr) break; - if ((unsigned long)tmp->addr >= IMALLOC_START) + if ((unsigned long)tmp->addr >= ioremap_bot) addr = tmp->size + (unsigned long) tmp->addr; if (addr > IMALLOC_END-size) return 1; diff --git a/arch/ppc64/mm/init.c b/arch/ppc64/mm/init.c index cf33d7ec2e29..afbf25227cb0 100644 --- a/arch/ppc64/mm/init.c +++ b/arch/ppc64/mm/init.c @@ -64,6 +64,7 @@ #include #include #include +#include int mem_init_done; unsigned long ioremap_bot = IMALLOC_BASE; diff --git a/arch/ppc64/mm/stab.c b/arch/ppc64/mm/stab.c index 31491131d5e4..df4bbe14153c 100644 --- a/arch/ppc64/mm/stab.c +++ b/arch/ppc64/mm/stab.c @@ -19,6 +19,11 @@ #include #include +struct stab_entry { + unsigned long esid_data; + unsigned long vsid_data; +}; + /* Both the segment table and SLB code uses the following cache */ #define NR_STAB_CACHE_ENTRIES 8 DEFINE_PER_CPU(long, stab_cache_ptr); diff --git a/include/asm-ppc64/imalloc.h b/include/asm-ppc64/imalloc.h new file mode 100644 index 000000000000..3a45e918bf16 --- /dev/null +++ b/include/asm-ppc64/imalloc.h @@ -0,0 +1,24 @@ +#ifndef _PPC64_IMALLOC_H +#define _PPC64_IMALLOC_H + +/* + * Define the address range of the imalloc VM area. + */ +#define PHBS_IO_BASE IOREGIONBASE +#define IMALLOC_BASE (IOREGIONBASE + 0x80000000ul) /* Reserve 2 gigs for PHBs */ +#define IMALLOC_END (IOREGIONBASE + EADDR_MASK) + + +/* imalloc region types */ +#define IM_REGION_UNUSED 0x1 +#define IM_REGION_SUBSET 0x2 +#define IM_REGION_EXISTS 0x4 +#define IM_REGION_OVERLAP 0x8 +#define IM_REGION_SUPERSET 0x10 + +extern struct vm_struct * im_get_free_area(unsigned long size); +extern struct vm_struct * im_get_area(unsigned long v_addr, unsigned long size, + int region_type); +unsigned long im_free(void *addr); + +#endif /* _PPC64_IMALLOC_H */ diff --git a/include/asm-ppc64/mmu.h b/include/asm-ppc64/mmu.h index 188987e9d9d4..c78282a67d8e 100644 --- a/include/asm-ppc64/mmu.h +++ b/include/asm-ppc64/mmu.h @@ -15,19 +15,10 @@ #include #include -#include -#ifndef __ASSEMBLY__ - -/* Time to allow for more things here */ -typedef unsigned long mm_context_id_t; -typedef struct { - mm_context_id_t id; -#ifdef CONFIG_HUGETLB_PAGE - pgd_t *huge_pgdir; - u16 htlb_segs; /* bitmask */ -#endif -} mm_context_t; +/* + * Segment table + */ #define STE_ESID_V 0x80 #define STE_ESID_KS 0x20 @@ -36,15 +27,48 @@ typedef struct { #define STE_VSID_SHIFT 12 -struct stab_entry { - unsigned long esid_data; - unsigned long vsid_data; -}; +/* Location of cpu0's segment table */ +#define STAB0_PAGE 0x9 +#define STAB0_PHYS_ADDR (STAB0_PAGE<> VSID_BITS) + (x & VSID_MODULUS); + return (x + ((x+1) >> VSID_BITS)) & VSID_MODULUS; +#endif /* 1 */ +} + +/* This is only valid for addresses >= KERNELBASE */ +static inline unsigned long get_kernel_vsid(unsigned long ea) +{ + return vsid_scramble(ea >> SID_SHIFT); +} + +/* This is only valid for user addresses (which are below 2^41) */ +static inline unsigned long get_vsid(unsigned long context, unsigned long ea) +{ + return vsid_scramble((context << USER_ESID_BITS) + | (ea >> SID_SHIFT)); +} + +#endif /* __ASSEMBLY */ + #endif /* _PPC64_MMU_H_ */ diff --git a/include/asm-ppc64/mmu_context.h b/include/asm-ppc64/mmu_context.h index c2e8e0466383..77a743402db4 100644 --- a/include/asm-ppc64/mmu_context.h +++ b/include/asm-ppc64/mmu_context.h @@ -84,86 +84,4 @@ static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next) local_irq_restore(flags); } -/* VSID allocation - * =============== - * - * We first generate a 36-bit "proto-VSID". For kernel addresses this - * is equal to the ESID, for user addresses it is: - * (context << 15) | (esid & 0x7fff) - * - * The two forms are distinguishable because the top bit is 0 for user - * addresses, whereas the top two bits are 1 for kernel addresses. - * Proto-VSIDs with the top two bits equal to 0b10 are reserved for - * now. - * - * The proto-VSIDs are then scrambled into real VSIDs with the - * multiplicative hash: - * - * VSID = (proto-VSID * VSID_MULTIPLIER) % VSID_MODULUS - * where VSID_MULTIPLIER = 268435399 = 0xFFFFFC7 - * VSID_MODULUS = 2^36-1 = 0xFFFFFFFFF - * - * This scramble is only well defined for proto-VSIDs below - * 0xFFFFFFFFF, so both proto-VSID and actual VSID 0xFFFFFFFFF are - * reserved. VSID_MULTIPLIER is prime, so in particular it is - * co-prime to VSID_MODULUS, making this a 1:1 scrambling function. - * Because the modulus is 2^n-1 we can compute it efficiently without - * a divide or extra multiply (see below). - * - * This scheme has several advantages over older methods: - * - * - We have VSIDs allocated for every kernel address - * (i.e. everything above 0xC000000000000000), except the very top - * segment, which simplifies several things. - * - * - We allow for 15 significant bits of ESID and 20 bits of - * context for user addresses. i.e. 8T (43 bits) of address space for - * up to 1M contexts (although the page table structure and context - * allocation will need changes to take advantage of this). - * - * - The scramble function gives robust scattering in the hash - * table (at least based on some initial results). The previous - * method was more susceptible to pathological cases giving excessive - * hash collisions. - */ - -/* - * WARNING - If you change these you must make sure the asm - * implementations in slb_allocate(), do_stab_bolted and mmu.h - * (ASM_VSID_SCRAMBLE macro) are changed accordingly. - * - * You'll also need to change the precomputed VSID values in head.S - * which are used by the iSeries firmware. - */ - -static inline unsigned long vsid_scramble(unsigned long protovsid) -{ -#if 0 - /* The code below is equivalent to this function for arguments - * < 2^VSID_BITS, which is all this should ever be called - * with. However gcc is not clever enough to compute the - * modulus (2^n-1) without a second multiply. */ - return ((protovsid * VSID_MULTIPLIER) % VSID_MODULUS); -#else /* 1 */ - unsigned long x; - - x = protovsid * VSID_MULTIPLIER; - x = (x >> VSID_BITS) + (x & VSID_MODULUS); - return (x + ((x+1) >> VSID_BITS)) & VSID_MODULUS; -#endif /* 1 */ -} - -/* This is only valid for addresses >= KERNELBASE */ -static inline unsigned long get_kernel_vsid(unsigned long ea) -{ - return vsid_scramble(ea >> SID_SHIFT); -} - -/* This is only valid for user addresses (which are below 2^41) */ -static inline unsigned long get_vsid(unsigned long context, unsigned long ea) -{ - return vsid_scramble((context << USER_ESID_BITS) - | (ea >> SID_SHIFT)); -} - #endif /* __PPC64_MMU_CONTEXT_H */ diff --git a/include/asm-ppc64/page.h b/include/asm-ppc64/page.h index 86219574c1a5..bcd21789d3b7 100644 --- a/include/asm-ppc64/page.h +++ b/include/asm-ppc64/page.h @@ -23,7 +23,6 @@ #define PAGE_SHIFT 12 #define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) -#define PAGE_OFFSET_MASK (PAGE_SIZE-1) #define SID_SHIFT 28 #define SID_MASK 0xfffffffffUL @@ -85,9 +84,6 @@ /* align addr on a size boundary - adjust address up if needed */ #define _ALIGN(addr,size) _ALIGN_UP(addr,size) -/* to align the pointer to the (next) double word boundary */ -#define DOUBLEWORD_ALIGN(addr) _ALIGN(addr,sizeof(unsigned long)) - /* to align the pointer to the (next) page boundary */ #define PAGE_ALIGN(addr) _ALIGN(addr, PAGE_SIZE) @@ -100,7 +96,6 @@ #define REGION_SIZE 4UL #define REGION_SHIFT 60UL #define REGION_MASK (((1UL<>REGION_SHIFT) -#define VMALLOC_REGION_ID (VMALLOCBASE>>REGION_SHIFT) -#define KERNEL_REGION_ID (KERNELBASE>>REGION_SHIFT) +#define IO_REGION_ID (IOREGIONBASE >> REGION_SHIFT) +#define VMALLOC_REGION_ID (VMALLOCBASE >> REGION_SHIFT) +#define KERNEL_REGION_ID (KERNELBASE >> REGION_SHIFT) #define USER_REGION_ID (0UL) -#define REGION_ID(X) (((unsigned long)(X))>>REGION_SHIFT) +#define REGION_ID(ea) (((unsigned long)(ea)) >> REGION_SHIFT) -#define __bpn_to_ba(x) ((((unsigned long)(x))<> PAGE_SHIFT) #define __va(x) ((void *)((unsigned long)(x) + KERNELBASE)) diff --git a/include/asm-ppc64/pgtable.h b/include/asm-ppc64/pgtable.h index b984e2747e0c..264c4f7993be 100644 --- a/include/asm-ppc64/pgtable.h +++ b/include/asm-ppc64/pgtable.h @@ -17,16 +17,6 @@ #include -/* PMD_SHIFT determines what a second-level page table entry can map */ -#define PMD_SHIFT (PAGE_SHIFT + PAGE_SHIFT - 3) -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) - -/* PGDIR_SHIFT determines what a third-level page table entry can map */ -#define PGDIR_SHIFT (PAGE_SHIFT + (PAGE_SHIFT - 3) + (PAGE_SHIFT - 2)) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - /* * Entries per page directory level. The PTE level must use a 64b record * for each page table entry. The PMD and PGD level use a 32b record for @@ -40,40 +30,30 @@ #define PTRS_PER_PMD (1 << PMD_INDEX_SIZE) #define PTRS_PER_PGD (1 << PGD_INDEX_SIZE) -#define USER_PTRS_PER_PGD (1024) -#define FIRST_USER_ADDRESS 0 +/* PMD_SHIFT determines what a second-level page table entry can map */ +#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE) +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) -#define EADDR_SIZE (PTE_INDEX_SIZE + PMD_INDEX_SIZE + \ - PGD_INDEX_SIZE + PAGE_SHIFT) +/* PGDIR_SHIFT determines what a third-level page table entry can map */ +#define PGDIR_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +#define FIRST_USER_ADDRESS 0 /* * Size of EA range mapped by our pagetables. */ -#define PGTABLE_EA_BITS 41 -#define PGTABLE_EA_MASK ((1UL<> PMD_TO_PTEPAGE_SHIFT)) +#define pmd_page_kernel(pmd) (__bpn_to_ba(pmd_val(pmd))) #define pmd_page(pmd) virt_to_page(pmd_page_kernel(pmd)) #define pud_set(pudp, pmdp) (pud_val(*(pudp)) = (__ba_to_bpn(pmdp))) @@ -266,8 +242,6 @@ void hugetlb_mm_free_pgd(struct mm_struct *mm); /* to find an entry in the ioremap page-table-directory */ #define pgd_offset_i(address) (ioremap_pgd + pgd_index(address)) -#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) - /* * The following only work if pte_present() is true. * Undefined behaviour if not.. @@ -442,7 +416,7 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_clear(mm, addr, ptep); flush_tlb_pending(); } - *ptep = __pte(pte_val(pte)) & ~_PAGE_HPTEFLAGS; + *ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS); } /* Set the dirty and/or accessed bits atomically in a linux PTE, this @@ -487,18 +461,13 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long addr, extern unsigned long ioremap_bot, ioremap_base; -#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT) -#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS) - -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e)) #define pmd_ERROR(e) \ printk("%s:%d: bad pmd %08x.\n", __FILE__, __LINE__, pmd_val(e)) #define pgd_ERROR(e) \ printk("%s:%d: bad pgd %08x.\n", __FILE__, __LINE__, pgd_val(e)) -extern pgd_t swapper_pg_dir[1024]; -extern pgd_t ioremap_dir[1024]; +extern pgd_t swapper_pg_dir[]; +extern pgd_t ioremap_dir[]; extern void paging_init(void); @@ -540,43 +509,11 @@ extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t); */ #define kern_addr_valid(addr) (1) -#define io_remap_page_range(vma, vaddr, paddr, size, prot) \ - remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot) - #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ remap_pfn_range(vma, vaddr, pfn, size, prot) -#define MK_IOSPACE_PFN(space, pfn) (pfn) -#define GET_IOSPACE(pfn) 0 -#define GET_PFN(pfn) (pfn) - void pgtable_cache_init(void); -extern void hpte_init_native(void); -extern void hpte_init_lpar(void); -extern void hpte_init_iSeries(void); - -/* imalloc region types */ -#define IM_REGION_UNUSED 0x1 -#define IM_REGION_SUBSET 0x2 -#define IM_REGION_EXISTS 0x4 -#define IM_REGION_OVERLAP 0x8 -#define IM_REGION_SUPERSET 0x10 - -extern struct vm_struct * im_get_free_area(unsigned long size); -extern struct vm_struct * im_get_area(unsigned long v_addr, unsigned long size, - int region_type); -unsigned long im_free(void *addr); - -extern long pSeries_lpar_hpte_insert(unsigned long hpte_group, - unsigned long va, unsigned long prpn, - int secondary, unsigned long hpteflags, - int bolted, int large); - -extern long native_hpte_insert(unsigned long hpte_group, unsigned long va, - unsigned long prpn, int secondary, - unsigned long hpteflags, int bolted, int large); - /* * find_linux_pte returns the address of a linux pte for a given * effective address and directory. If not found, it returns zero. -- cgit v1.2.3 From 6741f3a7f9922391cd02b3ca1329e669497dc22f Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Fri, 6 May 2005 12:10:04 +1000 Subject: [PATCH] arch/ppc64: Replace custom MIN macro Replace a custom MIN() macro with the min() macro from kernel.h This patch removes 4 lines of redundant code. Signed-off-by: Tobias Klauser Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/signal.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/signal.c b/arch/ppc64/kernel/signal.c index a95a2b49a1d5..bf782276984c 100644 --- a/arch/ppc64/kernel/signal.c +++ b/arch/ppc64/kernel/signal.c @@ -42,11 +42,7 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) -#ifndef MIN -#define MIN(a,b) (((a) < (b)) ? (a) : (b)) -#endif - -#define GP_REGS_SIZE MIN(sizeof(elf_gregset_t), sizeof(struct pt_regs)) +#define GP_REGS_SIZE min(sizeof(elf_gregset_t), sizeof(struct pt_regs)) #define FP_REGS_SIZE sizeof(elf_fpregset_t) #define TRAMP_TRACEBACK 3 -- cgit v1.2.3 From 3892c5fa9455670466f9f5518b3b7ef12ef3ccd6 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 6 May 2005 13:29:34 +1000 Subject: [PATCH] ppc64: fix prom.c compile warning The code in unflatten_device_tree knows that get_property is written to only return with lenp equal to 1 when also returning a valid pointer. The gcc 3.3.3 compiler is not able to prove this to itself, so it warns about a possible uninitialized pointer dereference: .../arch/ppc64/kernel/prom.c: In function `unflatten_device_tree': .../arch/ppc64/kernel/prom.c:828: warning: `p' might be used uninitialized in this function Unless it is desired to rework the interaction between the two functions, this will keep the existing behavior but quiet the compiler. Signed-off-by: Amos Waterland Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/prom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/prom.c b/arch/ppc64/kernel/prom.c index fe2946c58314..eb6538b58008 100644 --- a/arch/ppc64/kernel/prom.c +++ b/arch/ppc64/kernel/prom.c @@ -834,7 +834,7 @@ void __init unflatten_device_tree(void) { unsigned long start, mem, size; struct device_node **allnextp = &allnodes; - char *p; + char *p = NULL; int l = 0; DBG(" -> unflatten_device_tree()\n"); -- cgit v1.2.3 From 5e2afc1ddd2a22b290bc334c0deffdd6dcdebc80 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 6 May 2005 13:35:04 +1000 Subject: [PATCH] ppc64: fix reloc_offset comment The code in reloc_offset is actually subtracting the address in the link register from the address calculated by the linker. Perhaps the extended mnemonic `sub' replaced an original `subf' and the comment just did not get updated. bl 1f 1: mflr r3 LOADADDR(r4,1b) sub r3,r4,r3 Signed-off-by: Amos Waterland Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/misc.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S index 90b41f48d21c..b944717c1dbd 100644 --- a/arch/ppc64/kernel/misc.S +++ b/arch/ppc64/kernel/misc.S @@ -32,7 +32,7 @@ .text /* - * Returns (address we're running at) - (address we were linked at) + * Returns (address we were linked at) - (address we are running at) * for use before the text and data are mapped to KERNELBASE. */ -- cgit v1.2.3 From af4d4b34106b6e520e6b13350831b170d8bca117 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 6 May 2005 14:27:17 +1000 Subject: [PATCH] ppc64: remove asm/bootinfo.h include The defines in bootinfo.h are not used, so the include can be removed. According to Ben, birecs are not used on ppc64: on ppc64, we made the decision of enforcing the presence of an OF device-tree and either an OF-like client interface or a kexec like flattened tree. so if your bootloader want to say things to the kernel, it can do so by adding properties to the device-tree compile-tested with defconfig Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc64/boot/main.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/boot/main.c b/arch/ppc64/boot/main.c index b0fa86ad8b1b..da12ea2ca464 100644 --- a/arch/ppc64/boot/main.c +++ b/arch/ppc64/boot/main.c @@ -14,7 +14,6 @@ #include #include #include -#include extern void *finddevice(const char *); extern int getprop(void *, const char *, void *, int); -- cgit v1.2.3 From 8b3447db2e02f01f94b4bcd8584caccdada6fa4a Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 6 May 2005 14:25:55 +1000 Subject: [PATCH] ppc64: remove unused arch/ppc64/boot/start.c start.c is not referenced in the arch/ppc64/boot/Makefile compile tested with the defconfig. Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc64/boot/start.c | 654 ------------------------------------------------ 1 file changed, 654 deletions(-) delete mode 100644 arch/ppc64/boot/start.c (limited to 'arch/ppc64') diff --git a/arch/ppc64/boot/start.c b/arch/ppc64/boot/start.c deleted file mode 100644 index ea247e79b55e..000000000000 --- a/arch/ppc64/boot/start.c +++ /dev/null @@ -1,654 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include -#include -#include -#include - -#include - -int (*prom)(void *); - -void *chosen_handle; -void *stdin; -void *stdout; -void *stderr; - -void exit(void); -void *finddevice(const char *name); -int getprop(void *phandle, const char *name, void *buf, int buflen); -void chrpboot(int a1, int a2, void *prom); /* in main.c */ - -void printk(char *fmt, ...); - -void -start(int a1, int a2, void *promptr) -{ - prom = (int (*)(void *)) promptr; - chosen_handle = finddevice("/chosen"); - if (chosen_handle == (void *) -1) - exit(); - if (getprop(chosen_handle, "stdout", &stdout, sizeof(stdout)) != 4) - exit(); - stderr = stdout; - if (getprop(chosen_handle, "stdin", &stdin, sizeof(stdin)) != 4) - exit(); - - chrpboot(a1, a2, promptr); - for (;;) - exit(); -} - -int -write(void *handle, void *ptr, int nb) -{ - struct prom_args { - char *service; - int nargs; - int nret; - void *ihandle; - void *addr; - int len; - int actual; - } args; - - args.service = "write"; - args.nargs = 3; - args.nret = 1; - args.ihandle = handle; - args.addr = ptr; - args.len = nb; - args.actual = -1; - (*prom)(&args); - return args.actual; -} - -int -read(void *handle, void *ptr, int nb) -{ - struct prom_args { - char *service; - int nargs; - int nret; - void *ihandle; - void *addr; - int len; - int actual; - } args; - - args.service = "read"; - args.nargs = 3; - args.nret = 1; - args.ihandle = handle; - args.addr = ptr; - args.len = nb; - args.actual = -1; - (*prom)(&args); - return args.actual; -} - -void -exit() -{ - struct prom_args { - char *service; - } args; - - for (;;) { - args.service = "exit"; - (*prom)(&args); - } -} - -void -pause(void) -{ - struct prom_args { - char *service; - } args; - - args.service = "enter"; - (*prom)(&args); -} - -void * -finddevice(const char *name) -{ - struct prom_args { - char *service; - int nargs; - int nret; - const char *devspec; - void *phandle; - } args; - - args.service = "finddevice"; - args.nargs = 1; - args.nret = 1; - args.devspec = name; - args.phandle = (void *) -1; - (*prom)(&args); - return args.phandle; -} - -void * -claim(unsigned long virt, unsigned long size, unsigned long align) -{ - struct prom_args { - char *service; - int nargs; - int nret; - unsigned int virt; - unsigned int size; - unsigned int align; - void *ret; - } args; - - args.service = "claim"; - args.nargs = 3; - args.nret = 1; - args.virt = virt; - args.size = size; - args.align = align; - (*prom)(&args); - return args.ret; -} - -int -getprop(void *phandle, const char *name, void *buf, int buflen) -{ - struct prom_args { - char *service; - int nargs; - int nret; - void *phandle; - const char *name; - void *buf; - int buflen; - int size; - } args; - - args.service = "getprop"; - args.nargs = 4; - args.nret = 1; - args.phandle = phandle; - args.name = name; - args.buf = buf; - args.buflen = buflen; - args.size = -1; - (*prom)(&args); - return args.size; -} - -int -putc(int c, void *f) -{ - char ch = c; - - if (c == '\n') - putc('\r', f); - return write(f, &ch, 1) == 1? c: -1; -} - -int -putchar(int c) -{ - return putc(c, stdout); -} - -int -fputs(char *str, void *f) -{ - int n = strlen(str); - - return write(f, str, n) == n? 0: -1; -} - -int -readchar(void) -{ - char ch; - - for (;;) { - switch (read(stdin, &ch, 1)) { - case 1: - return ch; - case -1: - printk("read(stdin) returned -1\r\n"); - return -1; - } - } -} - -static char line[256]; -static char *lineptr; -static int lineleft; - -int -getchar(void) -{ - int c; - - if (lineleft == 0) { - lineptr = line; - for (;;) { - c = readchar(); - if (c == -1 || c == 4) - break; - if (c == '\r' || c == '\n') { - *lineptr++ = '\n'; - putchar('\n'); - break; - } - switch (c) { - case 0177: - case '\b': - if (lineptr > line) { - putchar('\b'); - putchar(' '); - putchar('\b'); - --lineptr; - } - break; - case 'U' & 0x1F: - while (lineptr > line) { - putchar('\b'); - putchar(' '); - putchar('\b'); - --lineptr; - } - break; - default: - if (lineptr >= &line[sizeof(line) - 1]) - putchar('\a'); - else { - putchar(c); - *lineptr++ = c; - } - } - } - lineleft = lineptr - line; - lineptr = line; - } - if (lineleft == 0) - return -1; - --lineleft; - return *lineptr++; -} - - - -/* String functions lifted from lib/vsprintf.c and lib/ctype.c */ -unsigned char _ctype[] = { -_C,_C,_C,_C,_C,_C,_C,_C, /* 0-7 */ -_C,_C|_S,_C|_S,_C|_S,_C|_S,_C|_S,_C,_C, /* 8-15 */ -_C,_C,_C,_C,_C,_C,_C,_C, /* 16-23 */ -_C,_C,_C,_C,_C,_C,_C,_C, /* 24-31 */ -_S|_SP,_P,_P,_P,_P,_P,_P,_P, /* 32-39 */ -_P,_P,_P,_P,_P,_P,_P,_P, /* 40-47 */ -_D,_D,_D,_D,_D,_D,_D,_D, /* 48-55 */ -_D,_D,_P,_P,_P,_P,_P,_P, /* 56-63 */ -_P,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U, /* 64-71 */ -_U,_U,_U,_U,_U,_U,_U,_U, /* 72-79 */ -_U,_U,_U,_U,_U,_U,_U,_U, /* 80-87 */ -_U,_U,_U,_P,_P,_P,_P,_P, /* 88-95 */ -_P,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L, /* 96-103 */ -_L,_L,_L,_L,_L,_L,_L,_L, /* 104-111 */ -_L,_L,_L,_L,_L,_L,_L,_L, /* 112-119 */ -_L,_L,_L,_P,_P,_P,_P,_C, /* 120-127 */ -0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 128-143 */ -0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 144-159 */ -_S|_SP,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P, /* 160-175 */ -_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P, /* 176-191 */ -_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U, /* 192-207 */ -_U,_U,_U,_U,_U,_U,_U,_P,_U,_U,_U,_U,_U,_U,_U,_L, /* 208-223 */ -_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L, /* 224-239 */ -_L,_L,_L,_L,_L,_L,_L,_P,_L,_L,_L,_L,_L,_L,_L,_L}; /* 240-255 */ - -size_t strnlen(const char * s, size_t count) -{ - const char *sc; - - for (sc = s; count-- && *sc != '\0'; ++sc) - /* nothing */; - return sc - s; -} - -unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base) -{ - unsigned long result = 0,value; - - if (!base) { - base = 10; - if (*cp == '0') { - base = 8; - cp++; - if ((*cp == 'x') && isxdigit(cp[1])) { - cp++; - base = 16; - } - } - } - while (isxdigit(*cp) && - (value = isdigit(*cp) ? *cp-'0' : toupper(*cp)-'A'+10) < base) { - result = result*base + value; - cp++; - } - if (endp) - *endp = (char *)cp; - return result; -} - -long simple_strtol(const char *cp,char **endp,unsigned int base) -{ - if(*cp=='-') - return -simple_strtoul(cp+1,endp,base); - return simple_strtoul(cp,endp,base); -} - -static int skip_atoi(const char **s) -{ - int i=0; - - while (isdigit(**s)) - i = i*10 + *((*s)++) - '0'; - return i; -} - -#define ZEROPAD 1 /* pad with zero */ -#define SIGN 2 /* unsigned/signed long */ -#define PLUS 4 /* show plus */ -#define SPACE 8 /* space if plus */ -#define LEFT 16 /* left justified */ -#define SPECIAL 32 /* 0x */ -#define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */ - -static char * number(char * str, long long num, int base, int size, int precision, int type) -{ - char c,sign,tmp[66]; - const char *digits="0123456789abcdefghijklmnopqrstuvwxyz"; - int i; - - if (type & LARGE) - digits = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"; - if (type & LEFT) - type &= ~ZEROPAD; - if (base < 2 || base > 36) - return 0; - c = (type & ZEROPAD) ? '0' : ' '; - sign = 0; - if (type & SIGN) { - if (num < 0) { - sign = '-'; - num = -num; - size--; - } else if (type & PLUS) { - sign = '+'; - size--; - } else if (type & SPACE) { - sign = ' '; - size--; - } - } - if (type & SPECIAL) { - if (base == 16) - size -= 2; - else if (base == 8) - size--; - } - i = 0; - if (num == 0) - tmp[i++]='0'; - else while (num != 0) - tmp[i++] = digits[do_div(num,base)]; - if (i > precision) - precision = i; - size -= precision; - if (!(type&(ZEROPAD+LEFT))) - while(size-->0) - *str++ = ' '; - if (sign) - *str++ = sign; - if (type & SPECIAL) { - if (base==8) - *str++ = '0'; - else if (base==16) { - *str++ = '0'; - *str++ = digits[33]; - } - } - if (!(type & LEFT)) - while (size-- > 0) - *str++ = c; - while (i < precision--) - *str++ = '0'; - while (i-- > 0) - *str++ = tmp[i]; - while (size-- > 0) - *str++ = ' '; - return str; -} - -/* Forward decl. needed for IP address printing stuff... */ -int sprintf(char * buf, const char *fmt, ...); - -int vsprintf(char *buf, const char *fmt, va_list args) -{ - int len; - unsigned long long num; - int i, base; - char * str; - const char *s; - - int flags; /* flags to number() */ - - int field_width; /* width of output field */ - int precision; /* min. # of digits for integers; max - number of chars for from string */ - int qualifier; /* 'h', 'l', or 'L' for integer fields */ - /* 'z' support added 23/7/1999 S.H. */ - /* 'z' changed to 'Z' --davidm 1/25/99 */ - - - for (str=buf ; *fmt ; ++fmt) { - if (*fmt != '%') { - *str++ = *fmt; - continue; - } - - /* process flags */ - flags = 0; - repeat: - ++fmt; /* this also skips first '%' */ - switch (*fmt) { - case '-': flags |= LEFT; goto repeat; - case '+': flags |= PLUS; goto repeat; - case ' ': flags |= SPACE; goto repeat; - case '#': flags |= SPECIAL; goto repeat; - case '0': flags |= ZEROPAD; goto repeat; - } - - /* get field width */ - field_width = -1; - if (isdigit(*fmt)) - field_width = skip_atoi(&fmt); - else if (*fmt == '*') { - ++fmt; - /* it's the next argument */ - field_width = va_arg(args, int); - if (field_width < 0) { - field_width = -field_width; - flags |= LEFT; - } - } - - /* get the precision */ - precision = -1; - if (*fmt == '.') { - ++fmt; - if (isdigit(*fmt)) - precision = skip_atoi(&fmt); - else if (*fmt == '*') { - ++fmt; - /* it's the next argument */ - precision = va_arg(args, int); - } - if (precision < 0) - precision = 0; - } - - /* get the conversion qualifier */ - qualifier = -1; - if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L' || *fmt =='Z') { - qualifier = *fmt; - ++fmt; - } - - /* default base */ - base = 10; - - switch (*fmt) { - case 'c': - if (!(flags & LEFT)) - while (--field_width > 0) - *str++ = ' '; - *str++ = (unsigned char) va_arg(args, int); - while (--field_width > 0) - *str++ = ' '; - continue; - - case 's': - s = va_arg(args, char *); - if (!s) - s = ""; - - len = strnlen(s, precision); - - if (!(flags & LEFT)) - while (len < field_width--) - *str++ = ' '; - for (i = 0; i < len; ++i) - *str++ = *s++; - while (len < field_width--) - *str++ = ' '; - continue; - - case 'p': - if (field_width == -1) { - field_width = 2*sizeof(void *); - flags |= ZEROPAD; - } - str = number(str, - (unsigned long) va_arg(args, void *), 16, - field_width, precision, flags); - continue; - - - case 'n': - if (qualifier == 'l') { - long * ip = va_arg(args, long *); - *ip = (str - buf); - } else if (qualifier == 'Z') { - size_t * ip = va_arg(args, size_t *); - *ip = (str - buf); - } else { - int * ip = va_arg(args, int *); - *ip = (str - buf); - } - continue; - - case '%': - *str++ = '%'; - continue; - - /* integer number formats - set up the flags and "break" */ - case 'o': - base = 8; - break; - - case 'X': - flags |= LARGE; - case 'x': - base = 16; - break; - - case 'd': - case 'i': - flags |= SIGN; - case 'u': - break; - - default: - *str++ = '%'; - if (*fmt) - *str++ = *fmt; - else - --fmt; - continue; - } - if (qualifier == 'L') - num = va_arg(args, long long); - else if (qualifier == 'l') { - num = va_arg(args, unsigned long); - if (flags & SIGN) - num = (signed long) num; - } else if (qualifier == 'Z') { - num = va_arg(args, size_t); - } else if (qualifier == 'h') { - num = (unsigned short) va_arg(args, int); - if (flags & SIGN) - num = (signed short) num; - } else { - num = va_arg(args, unsigned int); - if (flags & SIGN) - num = (signed int) num; - } - str = number(str, num, base, field_width, precision, flags); - } - *str = '\0'; - return str-buf; -} - -int sprintf(char * buf, const char *fmt, ...) -{ - va_list args; - int i; - - va_start(args, fmt); - i=vsprintf(buf,fmt,args); - va_end(args); - return i; -} - -static char sprint_buf[1024]; - -void -printk(char *fmt, ...) -{ - va_list args; - int n; - - va_start(args, fmt); - n = vsprintf(sprint_buf, fmt, args); - va_end(args); - write(stdout, sprint_buf, n); -} - -int -printf(char *fmt, ...) -{ - va_list args; - int n; - - va_start(args, fmt); - n = vsprintf(sprint_buf, fmt, args); - va_end(args); - write(stdout, sprint_buf, n); - return n; -} -- cgit v1.2.3 From 2512809255d018744fe6c2f5e996c83769846c07 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 6 May 2005 14:31:31 +1000 Subject: [PATCH] ppc64: remove explicit contig_page_data reference Trivial patch to remove our last direct reference to contig_page_data. This will make it just that much less hard to seperate NUMA and DISCONTIG. Please forward on. Against 2.6.12-rc1 Signed-off-by: Joel Schopp Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc64/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/mm/init.c b/arch/ppc64/mm/init.c index afbf25227cb0..4b42aff74d73 100644 --- a/arch/ppc64/mm/init.c +++ b/arch/ppc64/mm/init.c @@ -669,7 +669,7 @@ void __init paging_init(void) zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT; zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT; - free_area_init_node(0, &contig_page_data, zones_size, + free_area_init_node(0, NODE_DATA(0), zones_size, __pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size); } #endif /* CONFIG_DISCONTIGMEM */ -- cgit v1.2.3 From 6c80a21cb1825e576ffff9df2302bf0fa1065ceb Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 6 May 2005 16:28:56 +1000 Subject: [PATCH] ppc64: global interrupt queue cleanup Move the code to set global interrupt queue membership to xics.c, and remove no longer needed extern declarations. Also call it on all cpus (even the boot cpu) to prepare for kexec. Signed-off-by: Milton Miller Signed-off-by: R Sharada Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/pSeries_smp.c | 7 ------- arch/ppc64/kernel/xics.c | 16 ++++++++++++---- include/asm-ppc64/xics.h | 3 --- 3 files changed, 12 insertions(+), 14 deletions(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/pSeries_smp.c b/arch/ppc64/kernel/pSeries_smp.c index c60d8cb2b84d..fbad349ec58c 100644 --- a/arch/ppc64/kernel/pSeries_smp.c +++ b/arch/ppc64/kernel/pSeries_smp.c @@ -326,13 +326,6 @@ static void __devinit smp_xics_setup_cpu(int cpu) cpu_clear(cpu, of_spin_map); - /* - * Put the calling processor into the GIQ. This is really only - * necessary from a secondary thread as the OF start-cpu interface - * performs this function for us on primary threads. - */ - rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, - (1UL << interrupt_server_size) - 1 - default_distrib_server, 1); } static DEFINE_SPINLOCK(timebase_lock); diff --git a/arch/ppc64/kernel/xics.c b/arch/ppc64/kernel/xics.c index eedd1d3c2a10..879f39b90a33 100644 --- a/arch/ppc64/kernel/xics.c +++ b/arch/ppc64/kernel/xics.c @@ -432,6 +432,7 @@ void xics_cause_IPI(int cpu) { ops->qirr_info(cpu, IPI_PRIORITY); } +#endif /* CONFIG_SMP */ void xics_setup_cpu(void) { @@ -439,9 +440,17 @@ void xics_setup_cpu(void) ops->cppr_info(cpu, 0xff); iosync(); -} -#endif /* CONFIG_SMP */ + /* + * Put the calling processor into the GIQ. This is really only + * necessary from a secondary thread as the OF start-cpu interface + * performs this function for us on primary threads. + * + * XXX: undo of teardown on kexec needs this too, as may hotplug + */ + rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, + (1UL << interrupt_server_size) - 1 - default_distrib_server, 1); +} void xics_init_IRQ(void) { @@ -563,8 +572,7 @@ nextnode: for (; i < NR_IRQS; ++i) get_irq_desc(i)->handler = &xics_pic; - ops->cppr_info(boot_cpuid, 0xff); - iosync(); + xics_setup_cpu(); ppc64_boot_msg(0x21, "XICS Done"); } diff --git a/include/asm-ppc64/xics.h b/include/asm-ppc64/xics.h index 0027da4364ac..fdec5e7a7af6 100644 --- a/include/asm-ppc64/xics.h +++ b/include/asm-ppc64/xics.h @@ -30,7 +30,4 @@ struct xics_ipi_struct { extern struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned; -extern unsigned int default_distrib_server; -extern unsigned int interrupt_server_size; - #endif /* _PPC64_KERNEL_XICS_H */ -- cgit v1.2.3 From b7c2b704bd78aa3665fc24100bd2d4f5f8305d7a Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 6 May 2005 17:41:03 -0700 Subject: [PATCH] ppc64: enable CONFIG_RTAS_PROC by default This patch enables CONFIG_RTAS_PROC by default on pSeries. This will preserve /proc/ppc64/rtas/rmo_buffer, which is needed by librtas. Signed-off-by: John Rose Signed-off-by: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc64/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/ppc64') diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index 257ff66d83cf..5cb343883e4d 100644 --- a/arch/ppc64/Kconfig +++ b/arch/ppc64/Kconfig @@ -262,6 +262,7 @@ config PPC_RTAS config RTAS_PROC bool "Proc interface to RTAS" depends on PPC_RTAS + default y config RTAS_FLASH tristate "Firmware flash interface" -- cgit v1.2.3 From 1263cc67c09bc7f913a6877f3ba0427f0b76617e Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 23 May 2005 10:03:52 +1000 Subject: [PATCH] ppc64: Fix booting on latest G5 models The latest speedbumped Apple G5 models have a "bug" in the Open Firmware device tree that lacks the proper interrupt routing information for the northbridge i2c controller. Apple's driver silently falls back into a sub-optimal "polled" mode (heh, maybe they didn't even notice the bug because of that :), our driver didn't properly check and crashes :( This patch fixes our driver to not crash, and adds code to the prom_init() OF trampoline code that detects the "bug" and adds the missing information back for this chipset revision. This fixes booting and thermal control on these models. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/prom_init.c | 44 +++++++++++++++++++++++++++++++++++++++- drivers/i2c/busses/i2c-keywest.c | 5 +++++ 2 files changed, 48 insertions(+), 1 deletion(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index 35ec42de962e..6f79b7b9b445 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -1750,7 +1750,44 @@ static void __init flatten_device_tree(void) prom_printf("Device tree struct 0x%x -> 0x%x\n", RELOC(dt_struct_start), RELOC(dt_struct_end)); - } +} + + +static void __init fixup_device_tree(void) +{ + unsigned long offset = reloc_offset(); + phandle u3, i2c, mpic; + u32 u3_rev; + u32 interrupts[2]; + u32 parent; + + /* Some G5s have a missing interrupt definition, fix it up here */ + u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000")); + if ((long)u3 <= 0) + return; + i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000")); + if ((long)i2c <= 0) + return; + mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000")); + if ((long)mpic <= 0) + return; + + /* check if proper rev of u3 */ + if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) <= 0) + return; + if (u3_rev != 0x35) + return; + /* does it need fixup ? */ + if (prom_getproplen(i2c, "interrupts") > 0) + return; + /* interrupt on this revision of u3 is number 0 and level */ + interrupts[0] = 0; + interrupts[1] = 1; + prom_setprop(i2c, "interrupts", &interrupts, sizeof(interrupts)); + parent = (u32)mpic; + prom_setprop(i2c, "interrupt-parent", &parent, sizeof(parent)); +} + static void __init prom_find_boot_cpu(void) { @@ -1919,6 +1956,11 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long PTRRELOC(&prom_tce_alloc_end), sizeof(RELOC(prom_tce_alloc_end))); } + /* + * Fixup any known bugs in the device-tree + */ + fixup_device_tree(); + /* * Now finally create the flattened device-tree */ diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c index dd0d4c463146..867d443e7133 100644 --- a/drivers/i2c/busses/i2c-keywest.c +++ b/drivers/i2c/busses/i2c-keywest.c @@ -516,6 +516,11 @@ create_iface(struct device_node *np, struct device *dev) u32 *psteps, *prate; int rc; + if (np->n_intrs < 1 || np->n_addrs < 1) { + printk(KERN_ERR "%s: Missing interrupt or address !\n", + np->full_name); + return -ENODEV; + } if (pmac_low_i2c_lock(np)) return -ENODEV; -- cgit v1.2.3 From f10d20c1f192aa90fc935207f22da32462e793ee Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 23 May 2005 16:54:14 +1000 Subject: [PATCH] ppc64: Fix g5 hw timebase sync The hardware sync of the timebase on SMP G5s uses a black magic incantation to the i2c clock chip that was inspired from what Darwin does. However, this was an earlier version of Darwin that was ... buggy ! heh. This causes the latest models to break though when starting SMP, so it's worth fixing. Here's a new version of the incantation based on careful transcription of the said incantations as found in the latest version of apple's temple. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/pmac_smp.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/pmac_smp.c b/arch/ppc64/kernel/pmac_smp.c index c27588ede2fe..a23de37227bf 100644 --- a/arch/ppc64/kernel/pmac_smp.c +++ b/arch/ppc64/kernel/pmac_smp.c @@ -68,6 +68,7 @@ extern struct smp_ops_t *smp_ops; static void (*pmac_tb_freeze)(int freeze); static struct device_node *pmac_tb_clock_chip_host; +static u8 pmac_tb_pulsar_addr; static DEFINE_SPINLOCK(timebase_lock); static unsigned long timebase; @@ -106,12 +107,9 @@ static void smp_core99_pulsar_tb_freeze(int freeze) u8 data; int rc; - /* Strangely, the device-tree says address is 0xd2, but darwin - * accesses 0xd0 ... - */ pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined); rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - 0xd4 | pmac_low_i2c_read, + pmac_tb_pulsar_addr | pmac_low_i2c_read, 0x2e, &data, 1); if (rc != 0) goto bail; @@ -120,7 +118,7 @@ static void smp_core99_pulsar_tb_freeze(int freeze) pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub); rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - 0xd4 | pmac_low_i2c_write, + pmac_tb_pulsar_addr | pmac_low_i2c_write, 0x2e, &data, 1); bail: if (rc != 0) { @@ -185,6 +183,12 @@ static int __init smp_core99_probe(void) if (ncpus <= 1) return 1; + /* HW sync only on these platforms */ + if (!machine_is_compatible("PowerMac7,2") && + !machine_is_compatible("PowerMac7,3") && + !machine_is_compatible("RackMac3,1")) + goto nohwsync; + /* Look for the clock chip */ for (cc = NULL; (cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL;) { struct device_node *p = of_get_parent(cc); @@ -198,11 +202,18 @@ static int __init smp_core99_probe(void) goto next; switch (*reg) { case 0xd2: - pmac_tb_freeze = smp_core99_cypress_tb_freeze; - printk(KERN_INFO "Timebase clock is Cypress chip\n"); + if (device_is_compatible(cc, "pulsar-legacy-slewing")) { + pmac_tb_freeze = smp_core99_pulsar_tb_freeze; + pmac_tb_pulsar_addr = 0xd2; + printk(KERN_INFO "Timebase clock is Pulsar chip\n"); + } else if (device_is_compatible(cc, "cy28508")) { + pmac_tb_freeze = smp_core99_cypress_tb_freeze; + printk(KERN_INFO "Timebase clock is Cypress chip\n"); + } break; case 0xd4: pmac_tb_freeze = smp_core99_pulsar_tb_freeze; + pmac_tb_pulsar_addr = 0xd4; printk(KERN_INFO "Timebase clock is Pulsar chip\n"); break; } @@ -210,12 +221,15 @@ static int __init smp_core99_probe(void) pmac_tb_clock_chip_host = p; smp_ops->give_timebase = smp_core99_give_timebase; smp_ops->take_timebase = smp_core99_take_timebase; + of_node_put(cc); + of_node_put(p); break; } next: of_node_put(p); } + nohwsync: mpic_request_ipis(); return ncpus; -- cgit v1.2.3 From 8f80e5c911465743ccd3a328f992c7d8aaebf1e8 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 25 May 2005 13:41:26 +1000 Subject: [PATCH] ppc64: fix initialisation of gettimeofday calculations On PPC64, we keep track of when we need to update jiffies (and the variables used to calculate the time of day) based on the time base. If the time base frequence is sufficiently high compared to the processor clock frequency, then it is possible for the time of day variables to be corrupted at the time of the first decrementer interrupt we take. This became obvious on a legacy iSeries where the time base frequency is the same as the processor clock. This one line patch fixes the initialisation so that the time of day variables and the indicator we use to tell when updates are due are better synchronised. Signed-off-by: Stephen Rothwell Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/time.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/time.c b/arch/ppc64/kernel/time.c index 772a465b49f9..3d54745108c7 100644 --- a/arch/ppc64/kernel/time.c +++ b/arch/ppc64/kernel/time.c @@ -515,6 +515,7 @@ void __init time_init(void) do_gtod.varp = &do_gtod.vars[0]; do_gtod.var_idx = 0; do_gtod.varp->tb_orig_stamp = tb_last_stamp; + get_paca()->next_jiffy_update_tb = tb_last_stamp + tb_ticks_per_jiffy; do_gtod.varp->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; do_gtod.tb_ticks_per_sec = tb_ticks_per_sec; do_gtod.varp->tb_to_xs = tb_to_xs; -- cgit v1.2.3 From d0e8e29100c9866878d43bbb40ca17e8fe429851 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 25 May 2005 16:29:26 +1000 Subject: [PATCH] ppc64 iSeries: fix boot time setting For quite a while, there has existed a hypervisor bug on legacy iSeries which means that we do not get the boot time set in the kernel. This patch works around that bug. This was most noticable when the root partition needed to be checked at every boot as the kernel thought it was some time in 1905 until user mode reset the time correctly. Signed-off-by: Stephen Rothwell Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/mf.c | 85 ++++++++++++++++++++++++++++++++---------- arch/ppc64/kernel/rtc.c | 39 +------------------ include/asm-ppc64/iSeries/mf.h | 1 + 3 files changed, 67 insertions(+), 58 deletions(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/mf.c b/arch/ppc64/kernel/mf.c index 1bd52ece497c..5aca7e8005a8 100644 --- a/arch/ppc64/kernel/mf.c +++ b/arch/ppc64/kernel/mf.c @@ -1,7 +1,7 @@ /* * mf.c * Copyright (C) 2001 Troy D. Armstrong IBM Corporation - * Copyright (C) 2004 Stephen Rothwell IBM Corporation + * Copyright (C) 2004-2005 Stephen Rothwell IBM Corporation * * This modules exists as an interface between a Linux secondary partition * running on an iSeries and the primary partition's Virtual Service @@ -36,10 +36,12 @@ #include #include +#include #include #include #include #include +#include /* * This is the structure layout for the Machine Facilites LPAR event @@ -696,36 +698,23 @@ static void get_rtc_time_complete(void *token, struct ce_msg_data *ce_msg) complete(&rtc->com); } -int mf_get_rtc(struct rtc_time *tm) +static int rtc_set_tm(int rc, u8 *ce_msg, struct rtc_time *tm) { - struct ce_msg_comp_data ce_complete; - struct rtc_time_data rtc_data; - int rc; - - memset(&ce_complete, 0, sizeof(ce_complete)); - memset(&rtc_data, 0, sizeof(rtc_data)); - init_completion(&rtc_data.com); - ce_complete.handler = &get_rtc_time_complete; - ce_complete.token = &rtc_data; - rc = signal_ce_msg_simple(0x40, &ce_complete); - if (rc) - return rc; - wait_for_completion(&rtc_data.com); tm->tm_wday = 0; tm->tm_yday = 0; tm->tm_isdst = 0; - if (rtc_data.rc) { + if (rc) { tm->tm_sec = 0; tm->tm_min = 0; tm->tm_hour = 0; tm->tm_mday = 15; tm->tm_mon = 5; tm->tm_year = 52; - return rtc_data.rc; + return rc; } - if ((rtc_data.ce_msg.ce_msg[2] == 0xa9) || - (rtc_data.ce_msg.ce_msg[2] == 0xaf)) { + if ((ce_msg[2] == 0xa9) || + (ce_msg[2] == 0xaf)) { /* TOD clock is not set */ tm->tm_sec = 1; tm->tm_min = 1; @@ -736,7 +725,6 @@ int mf_get_rtc(struct rtc_time *tm) mf_set_rtc(tm); } { - u8 *ce_msg = rtc_data.ce_msg.ce_msg; u8 year = ce_msg[5]; u8 sec = ce_msg[6]; u8 min = ce_msg[7]; @@ -765,6 +753,63 @@ int mf_get_rtc(struct rtc_time *tm) return 0; } +int mf_get_rtc(struct rtc_time *tm) +{ + struct ce_msg_comp_data ce_complete; + struct rtc_time_data rtc_data; + int rc; + + memset(&ce_complete, 0, sizeof(ce_complete)); + memset(&rtc_data, 0, sizeof(rtc_data)); + init_completion(&rtc_data.com); + ce_complete.handler = &get_rtc_time_complete; + ce_complete.token = &rtc_data; + rc = signal_ce_msg_simple(0x40, &ce_complete); + if (rc) + return rc; + wait_for_completion(&rtc_data.com); + return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm); +} + +struct boot_rtc_time_data { + int busy; + struct ce_msg_data ce_msg; + int rc; +}; + +static void get_boot_rtc_time_complete(void *token, struct ce_msg_data *ce_msg) +{ + struct boot_rtc_time_data *rtc = token; + + memcpy(&rtc->ce_msg, ce_msg, sizeof(rtc->ce_msg)); + rtc->rc = 0; + rtc->busy = 0; +} + +int mf_get_boot_rtc(struct rtc_time *tm) +{ + struct ce_msg_comp_data ce_complete; + struct boot_rtc_time_data rtc_data; + int rc; + + memset(&ce_complete, 0, sizeof(ce_complete)); + memset(&rtc_data, 0, sizeof(rtc_data)); + rtc_data.busy = 1; + ce_complete.handler = &get_boot_rtc_time_complete; + ce_complete.token = &rtc_data; + rc = signal_ce_msg_simple(0x40, &ce_complete); + if (rc) + return rc; + /* We need to poll here as we are not yet taking interrupts */ + while (rtc_data.busy) { + extern unsigned long lpevent_count; + struct ItLpQueue *lpq = get_paca()->lpqueue_ptr; + if (lpq && ItLpQueue_isLpIntPending(lpq)) + lpevent_count += ItLpQueue_process(lpq, NULL); + } + return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm); +} + int mf_set_rtc(struct rtc_time *tm) { char ce_time[12]; diff --git a/arch/ppc64/kernel/rtc.c b/arch/ppc64/kernel/rtc.c index 3e70b91375fc..67989055a9fe 100644 --- a/arch/ppc64/kernel/rtc.c +++ b/arch/ppc64/kernel/rtc.c @@ -292,47 +292,10 @@ int iSeries_set_rtc_time(struct rtc_time *tm) void iSeries_get_boot_time(struct rtc_time *tm) { - unsigned long time; - static unsigned long lastsec = 1; - - u32 dataWord1 = *((u32 *)(&xSpCommArea.xBcdTimeAtIplStart)); - u32 dataWord2 = *(((u32 *)&(xSpCommArea.xBcdTimeAtIplStart)) + 1); - int year = 1970; - int year1 = ( dataWord1 >> 24 ) & 0x000000FF; - int year2 = ( dataWord1 >> 16 ) & 0x000000FF; - int sec = ( dataWord1 >> 8 ) & 0x000000FF; - int min = dataWord1 & 0x000000FF; - int hour = ( dataWord2 >> 24 ) & 0x000000FF; - int day = ( dataWord2 >> 8 ) & 0x000000FF; - int mon = dataWord2 & 0x000000FF; - if ( piranha_simulator ) return; - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(day); - BCD_TO_BIN(mon); - BCD_TO_BIN(year1); - BCD_TO_BIN(year2); - year = year1 * 100 + year2; - - time = mktime(year, mon, day, hour, min, sec); - time += ( jiffies / HZ ); - - /* Now THIS is a nasty hack! - * It ensures that the first two calls get different answers. - * That way the loop in init_time (time.c) will not think - * the clock is stuck. - */ - if ( lastsec ) { - time -= lastsec; - --lastsec; - } - - to_tm(time, tm); - tm->tm_year -= 1900; + mf_get_boot_rtc(tm); tm->tm_mon -= 1; } #endif diff --git a/include/asm-ppc64/iSeries/mf.h b/include/asm-ppc64/iSeries/mf.h index 2e59a8e15a0b..db333e1ee216 100644 --- a/include/asm-ppc64/iSeries/mf.h +++ b/include/asm-ppc64/iSeries/mf.h @@ -52,6 +52,7 @@ extern void mf_clear_src(void); extern void mf_init(void); extern int mf_get_rtc(struct rtc_time *tm); +extern int mf_get_boot_rtc(struct rtc_time *tm); extern int mf_set_rtc(struct rtc_time *tm); #endif /* _ASM_PPC64_ISERIES_MF_H */ -- cgit v1.2.3 From 05fda3b1d88ebac1fc866fc3ed5b7ef5a4672fa6 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 31 May 2005 17:01:11 +1000 Subject: [PATCH] ppc64: actually call prom_send_capabilities When I sent in the patch adding the code for the kernel to tell the firmware about its capabilities on pSeries machines, I included the function to give the capabilities to firmware but somehow forgot the hunk that adds the call to the new function. This patch adds the call. Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/prom_init.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index 6f79b7b9b445..bc53967a8643 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -1880,6 +1880,12 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long prom_setprop(_prom->chosen, "linux,platform", &getprop_rval, sizeof(getprop_rval)); + /* + * On pSeries, inform the firmware about our capabilities + */ + if (RELOC(of_platform) & PLATFORM_PSERIES) + prom_send_capabilities(); + /* * On pSeries, copy the CPU hold code */ -- cgit v1.2.3 From f50734569c25c4e902bd3d0fb2e5bd93a200cc75 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 31 May 2005 14:39:29 -0700 Subject: [PATCH] ppc64: allow timer based profiling on iseries We used to have an iseries specific profiler that used /proc/profile. Now thats gone we can use the generic timer based stuff. Signed-off-by: Anton Blanchard Acked-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/time.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/time.c b/arch/ppc64/kernel/time.c index 3d54745108c7..33364a7d2cd2 100644 --- a/arch/ppc64/kernel/time.c +++ b/arch/ppc64/kernel/time.c @@ -325,9 +325,7 @@ int timer_interrupt(struct pt_regs * regs) irq_enter(); -#ifndef CONFIG_PPC_ISERIES profile_tick(CPU_PROFILING, regs); -#endif lpaca->lppaca.int_dword.fields.decr_int = 0; -- cgit v1.2.3 From 44e4665cc9d856d15f04a012c78e4ab48f71290b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 1 Jun 2005 14:54:25 +1000 Subject: [PATCH] ppc64: Fix a device-tree bug on Apple's Apple's Open Firmware has a funny bug when creating the /cpus nodes where it leaves a dangling '\0' character in the CPU name which ends up appearing in the full path of the node. This is bogus and confuses /proc/device-tree badly. This patch strips those bogus zero's from the node full path when reading the device-tree from Open Firmware. The "name" property is not modified and still contains the spurrious 0 (it basically contains 0 tailing 0 instead of one) but that shouldn't be a problem. An equivalent patch for ppc32 will follow shortly Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/prom_init.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index bc53967a8643..3de950de3671 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -1566,7 +1566,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, { int l, align; phandle child; - char *namep, *prev_name, *sstart; + char *namep, *prev_name, *sstart, *p, *ep; unsigned long soff; unsigned char *valp; unsigned long offset = reloc_offset(); @@ -1588,6 +1588,14 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, call_prom("package-to-path", 3, 1, node, namep, l); } namep[l] = '\0'; + /* Fixup an Apple bug where they have bogus \0 chars in the + * middle of the path in some properties + */ + for (p = namep, ep = namep + l; p < ep; p++) + if (*p == '\0') { + memmove(p, p+1, ep - p); + ep--; l--; + } *mem_start = _ALIGN(((unsigned long) namep) + strlen(namep) + 1, 4); } -- cgit v1.2.3 From 5f64f73957f6cae3222f97f2599199ee562f7f3f Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 1 Jun 2005 17:07:27 +1000 Subject: [PATCH] ppc32/ppc64: cleanup /proc/device-tree This cleans up the /proc/device-tree representation of the Open Firmware device-tree on ppc and ppc64. It does the following things: - Workaround an issue in some Apple device-trees where a property may exist with the same name as a child node of the parent. We now simply "drop" the property instead of creating duplicate entries in /proc with random result... - Do not try to chop off the "@0" at the end of a node name whose unit address is 0. This is not useful, inconsistent, and the code was buggy and didn't always work anyway. - Do not create symlinks for the short name and unit address parts of a node. These were never really used, bloated the memory footprint of the device-tree with useless struct proc_dir_entry and their matching dentry and inode cache bloat. This results in smaller code, smaller memory footprint, and a more accurate view of the tree presented to userland. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/pSeries_reconfig.c | 8 --- fs/proc/proc_devtree.c | 105 +++++++++++++---------------------- include/asm-ppc64/prom.h | 13 +---- 3 files changed, 39 insertions(+), 87 deletions(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/pSeries_reconfig.c b/arch/ppc64/kernel/pSeries_reconfig.c index cb5443f2e49b..dc2a69d412a2 100644 --- a/arch/ppc64/kernel/pSeries_reconfig.c +++ b/arch/ppc64/kernel/pSeries_reconfig.c @@ -47,14 +47,6 @@ static void remove_node_proc_entries(struct device_node *np) remove_proc_entry(pp->name, np->pde); pp = pp->next; } - - /* Assuming that symlinks have the same parent directory as - * np->pde. - */ - if (np->name_link) - remove_proc_entry(np->name_link->name, parent->pde); - if (np->addr_link) - remove_proc_entry(np->addr_link->name, parent->pde); if (np->pde) remove_proc_entry(np->pde->name, parent->pde); } diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c index 67423c696c0a..6fd57f154197 100644 --- a/fs/proc/proc_devtree.c +++ b/fs/proc/proc_devtree.c @@ -12,15 +12,8 @@ #include #ifndef HAVE_ARCH_DEVTREE_FIXUPS -static inline void set_node_proc_entry(struct device_node *np, struct proc_dir_entry *de) -{ -} - -static void inline set_node_name_link(struct device_node *np, struct proc_dir_entry *de) -{ -} - -static void inline set_node_addr_link(struct device_node *np, struct proc_dir_entry *de) +static inline void set_node_proc_entry(struct device_node *np, + struct proc_dir_entry *de) { } #endif @@ -58,89 +51,67 @@ static int property_read_proc(char *page, char **start, off_t off, /* * Process a node, adding entries for its children and its properties. */ -void proc_device_tree_add_node(struct device_node *np, struct proc_dir_entry *de) +void proc_device_tree_add_node(struct device_node *np, + struct proc_dir_entry *de) { struct property *pp; struct proc_dir_entry *ent; - struct device_node *child, *sib; - const char *p, *at; - int l; - struct proc_dir_entry *list, **lastp, *al; + struct device_node *child; + struct proc_dir_entry *list = NULL, **lastp; + const char *p; set_node_proc_entry(np, de); lastp = &list; - for (pp = np->properties; pp != 0; pp = pp->next) { - /* - * Unfortunately proc_register puts each new entry - * at the beginning of the list. So we rearrange them. - */ - ent = create_proc_read_entry(pp->name, strncmp(pp->name, "security-", 9) ? - S_IRUGO : S_IRUSR, de, property_read_proc, pp); - if (ent == 0) - break; - if (!strncmp(pp->name, "security-", 9)) - ent->size = 0; /* don't leak number of password chars */ - else - ent->size = pp->length; - *lastp = ent; - lastp = &ent->next; - } - child = NULL; - while ((child = of_get_next_child(np, child))) { + for (child = NULL; (child = of_get_next_child(np, child));) { p = strrchr(child->full_name, '/'); if (!p) p = child->full_name; else ++p; - /* chop off '@0' if the name ends with that */ - l = strlen(p); - if (l > 2 && p[l-2] == '@' && p[l-1] == '0') - l -= 2; ent = proc_mkdir(p, de); if (ent == 0) break; *lastp = ent; + ent->next = NULL; lastp = &ent->next; proc_device_tree_add_node(child, ent); - - /* - * If we left the address part on the name, consider - * adding symlinks from the name and address parts. - */ - if (p[l] != 0 || (at = strchr(p, '@')) == 0) - continue; - + } + of_node_put(child); + for (pp = np->properties; pp != 0; pp = pp->next) { /* - * If this is the first node with a given name property, - * add a symlink with the name property as its name. + * Yet another Apple device-tree bogosity: on some machines, + * they have properties & nodes with the same name. Those + * properties are quite unimportant for us though, thus we + * simply "skip" them here, but we do have to check. */ - sib = NULL; - while ((sib = of_get_next_child(np, sib)) && sib != child) - if (sib->name && strcmp(sib->name, child->name) == 0) - break; - if (sib == child && strncmp(p, child->name, l) != 0) { - al = proc_symlink(child->name, de, ent->name); - if (al == 0) { - of_node_put(sib); + for (ent = list; ent != NULL; ent = ent->next) + if (!strcmp(ent->name, pp->name)) break; - } - set_node_name_link(child, al); - *lastp = al; - lastp = &al->next; + if (ent != NULL) { + printk(KERN_WARNING "device-tree: property \"%s\" name" + " conflicts with node in %s\n", pp->name, + np->full_name); + continue; } - of_node_put(sib); + /* - * Add another directory with the @address part as its name. + * Unfortunately proc_register puts each new entry + * at the beginning of the list. So we rearrange them. */ - al = proc_symlink(at, de, ent->name); - if (al == 0) + ent = create_proc_read_entry(pp->name, + strncmp(pp->name, "security-", 9) + ? S_IRUGO : S_IRUSR, de, + property_read_proc, pp); + if (ent == 0) break; - set_node_addr_link(child, al); - *lastp = al; - lastp = &al->next; + if (!strncmp(pp->name, "security-", 9)) + ent->size = 0; /* don't leak number of password chars */ + else + ent->size = pp->length; + ent->next = NULL; + *lastp = ent; + lastp = &ent->next; } - of_node_put(child); - *lastp = NULL; de->subdir = list; } diff --git a/include/asm-ppc64/prom.h b/include/asm-ppc64/prom.h index 2440a2c90ae9..04b1a84f7ca3 100644 --- a/include/asm-ppc64/prom.h +++ b/include/asm-ppc64/prom.h @@ -147,9 +147,7 @@ struct device_node { struct device_node *sibling; struct device_node *next; /* next device of same type */ struct device_node *allnext; /* next in list of all nodes */ - struct proc_dir_entry *pde; /* this node's proc directory */ - struct proc_dir_entry *name_link; /* name symlink */ - struct proc_dir_entry *addr_link; /* addr symlink */ + struct proc_dir_entry *pde; /* this node's proc directory */ struct kref kref; unsigned long _flags; }; @@ -174,15 +172,6 @@ static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_e dn->pde = de; } -static void inline set_node_name_link(struct device_node *dn, struct proc_dir_entry *de) -{ - dn->name_link = de; -} - -static void inline set_node_addr_link(struct device_node *dn, struct proc_dir_entry *de) -{ - dn->addr_link = de; -} /* OBSOLETE: Old stlye node lookup */ extern struct device_node *find_devices(const char *name); -- cgit v1.2.3 From 1e86d1c648508fd50e6c9960576b87906a7906ad Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 2 Jun 2005 14:11:37 +1000 Subject: [PATCH] ppc64: Fix result code handling in prom_init prom_init(), the trampoline code that "talks" to Open Firmware during early boot, has various issues with managing OF result codes. Some of my recent fixups in fact made the problem worse on some platforms. This patch reworks it all. Tested on g5, Maple, POWER3 and POWER5. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/prom_init.c | 102 +++++++++++++++++++++++++----------------- 1 file changed, 61 insertions(+), 41 deletions(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index 3de950de3671..1ac531ba7056 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -211,13 +211,23 @@ struct { */ #define ADDR(x) (u32) ((unsigned long)(x) - offset) +/* + * Error results ... some OF calls will return "-1" on error, some + * will return 0, some will return either. To simplify, here are + * macros to use with any ihandle or phandle return value to check if + * it is valid + */ + +#define PROM_ERROR (-1u) +#define PHANDLE_VALID(p) ((p) != 0 && (p) != PROM_ERROR) +#define IHANDLE_VALID(i) ((i) != 0 && (i) != PROM_ERROR) + + /* This is the one and *ONLY* place where we actually call open * firmware from, since we need to make sure we're running in 32b * mode when we do. We switch back to 64b mode upon return. */ -#define PROM_ERROR (-1) - static int __init call_prom(const char *service, int nargs, int nret, ...) { int i; @@ -587,14 +597,13 @@ static void __init prom_send_capabilities(void) { unsigned long offset = reloc_offset(); ihandle elfloader; - int ret; elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader")); if (elfloader == 0) { prom_printf("couldn't open /packages/elf-loader\n"); return; } - ret = call_prom("call-method", 3, 1, ADDR("process-elf-header"), + call_prom("call-method", 3, 1, ADDR("process-elf-header"), elfloader, ADDR(&fake_elf)); call_prom("close", 1, 0, elfloader); } @@ -646,7 +655,7 @@ static unsigned long __init alloc_up(unsigned long size, unsigned long align) base = _ALIGN_UP(base + 0x100000, align)) { prom_debug(" trying: 0x%x\n\r", base); addr = (unsigned long)prom_claim(base, size, 0); - if ((int)addr != PROM_ERROR) + if (addr != PROM_ERROR) break; addr = 0; if (align == 0) @@ -708,7 +717,7 @@ static unsigned long __init alloc_down(unsigned long size, unsigned long align, for(; base > RELOC(alloc_bottom); base = _ALIGN_DOWN(base - 0x100000, align)) { prom_debug(" trying: 0x%x\n\r", base); addr = (unsigned long)prom_claim(base, size, 0); - if ((int)addr != PROM_ERROR) + if (addr != PROM_ERROR) break; addr = 0; } @@ -902,18 +911,19 @@ static void __init prom_instantiate_rtas(void) { unsigned long offset = reloc_offset(); struct prom_t *_prom = PTRRELOC(&prom); - phandle prom_rtas, rtas_node; + phandle rtas_node; + ihandle rtas_inst; u32 base, entry = 0; u32 size = 0; prom_debug("prom_instantiate_rtas: start...\n"); - prom_rtas = call_prom("finddevice", 1, 1, ADDR("/rtas")); - prom_debug("prom_rtas: %x\n", prom_rtas); - if (prom_rtas == (phandle) -1) + rtas_node = call_prom("finddevice", 1, 1, ADDR("/rtas")); + prom_debug("rtas_node: %x\n", rtas_node); + if (!PHANDLE_VALID(rtas_node)) return; - prom_getprop(prom_rtas, "rtas-size", &size, sizeof(size)); + prom_getprop(rtas_node, "rtas-size", &size, sizeof(size)); if (size == 0) return; @@ -922,14 +932,18 @@ static void __init prom_instantiate_rtas(void) prom_printf("RTAS allocation failed !\n"); return; } - prom_printf("instantiating rtas at 0x%x", base); - rtas_node = call_prom("open", 1, 1, ADDR("/rtas")); - prom_printf("..."); + rtas_inst = call_prom("open", 1, 1, ADDR("/rtas")); + if (!IHANDLE_VALID(rtas_inst)) { + prom_printf("opening rtas package failed"); + return; + } + + prom_printf("instantiating rtas at 0x%x ...", base); if (call_prom("call-method", 3, 2, ADDR("instantiate-rtas"), - rtas_node, base) != PROM_ERROR) { + rtas_inst, base) != PROM_ERROR) { entry = (long)_prom->args.rets[1]; } if (entry == 0) { @@ -940,8 +954,8 @@ static void __init prom_instantiate_rtas(void) reserve_mem(base, size); - prom_setprop(prom_rtas, "linux,rtas-base", &base, sizeof(base)); - prom_setprop(prom_rtas, "linux,rtas-entry", &entry, sizeof(entry)); + prom_setprop(rtas_node, "linux,rtas-base", &base, sizeof(base)); + prom_setprop(rtas_node, "linux,rtas-entry", &entry, sizeof(entry)); prom_debug("rtas base = 0x%x\n", base); prom_debug("rtas entry = 0x%x\n", entry); @@ -1062,7 +1076,7 @@ static void __init prom_initialize_tce_table(void) prom_printf("opening PHB %s", path); phb_node = call_prom("open", 1, 1, path); - if ( (long)phb_node <= 0) + if (phb_node == 0) prom_printf("... failed\n"); else prom_printf("... done\n"); @@ -1279,12 +1293,12 @@ static void __init prom_init_client_services(unsigned long pp) /* get a handle for the stdout device */ _prom->chosen = call_prom("finddevice", 1, 1, ADDR("/chosen")); - if ((long)_prom->chosen <= 0) + if (!PHANDLE_VALID(_prom->chosen)) prom_panic("cannot find chosen"); /* msg won't be printed :( */ /* get device tree root */ _prom->root = call_prom("finddevice", 1, 1, ADDR("/")); - if ((long)_prom->root <= 0) + if (!PHANDLE_VALID(_prom->root)) prom_panic("cannot find device tree root"); /* msg won't be printed :( */ } @@ -1356,9 +1370,8 @@ static int __init prom_find_machine_type(void) } /* Default to pSeries. We need to know if we are running LPAR */ rtas = call_prom("finddevice", 1, 1, ADDR("/rtas")); - if (rtas != (phandle) -1) { - unsigned long x; - x = prom_getproplen(rtas, "ibm,hypertas-functions"); + if (!PHANDLE_VALID(rtas)) { + int x = prom_getproplen(rtas, "ibm,hypertas-functions"); if (x != PROM_ERROR) { prom_printf("Hypertas detected, assuming LPAR !\n"); return PLATFORM_PSERIES_LPAR; @@ -1426,12 +1439,13 @@ static void __init prom_check_displays(void) * leave some room at the end of the path for appending extra * arguments */ - if (call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-10) < 0) + if (call_prom("package-to-path", 3, 1, node, path, + PROM_SCRATCH_SIZE-10) == PROM_ERROR) continue; prom_printf("found display : %s, opening ... ", path); ih = call_prom("open", 1, 1, path); - if (ih == (ihandle)0 || ih == (ihandle)-1) { + if (ih == 0) { prom_printf("failed\n"); continue; } @@ -1514,6 +1528,12 @@ static unsigned long __init dt_find_string(char *str) return 0; } +/* + * The Open Firmware 1275 specification states properties must be 31 bytes or + * less, however not all firmwares obey this. Make it 64 bytes to be safe. + */ +#define MAX_PROPERTY_NAME 64 + static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start, unsigned long *mem_end) { @@ -1527,10 +1547,12 @@ static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start, /* get and store all property names */ prev_name = RELOC(""); for (;;) { - - /* 32 is max len of name including nul. */ - namep = make_room(mem_start, mem_end, 32, 1); - if (call_prom("nextprop", 3, 1, node, prev_name, namep) <= 0) { + int rc; + + /* 64 is max len of name including nul. */ + namep = make_room(mem_start, mem_end, MAX_PROPERTY_NAME, 1); + rc = call_prom("nextprop", 3, 1, node, prev_name, namep); + if (rc != 1) { /* No more nodes: unwind alloc */ *mem_start = (unsigned long)namep; break; @@ -1555,12 +1577,6 @@ static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start, } } -/* - * The Open Firmware 1275 specification states properties must be 31 bytes or - * less, however not all firmwares obey this. Make it 64 bytes to be safe. - */ -#define MAX_PROPERTY_NAME 64 - static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, unsigned long *mem_end) { @@ -1607,7 +1623,10 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, prev_name = RELOC(""); sstart = (char *)RELOC(dt_string_start); for (;;) { - if (call_prom("nextprop", 3, 1, node, prev_name, pname) <= 0) + int rc; + + rc = call_prom("nextprop", 3, 1, node, prev_name, pname); + if (rc != 1) break; /* find string offset */ @@ -1623,7 +1642,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, l = call_prom("getproplen", 2, 1, node, pname); /* sanity checks */ - if (l < 0) + if (l == PROM_ERROR) continue; if (l > MAX_PROPERTY_LENGTH) { prom_printf("WARNING: ignoring large property "); @@ -1771,17 +1790,18 @@ static void __init fixup_device_tree(void) /* Some G5s have a missing interrupt definition, fix it up here */ u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000")); - if ((long)u3 <= 0) + if (!PHANDLE_VALID(u3)) return; i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000")); - if ((long)i2c <= 0) + if (!PHANDLE_VALID(i2c)) return; mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000")); - if ((long)mpic <= 0) + if (!PHANDLE_VALID(mpic)) return; /* check if proper rev of u3 */ - if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) <= 0) + if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) + == PROM_ERROR) return; if (u3_rev != 0x35) return; -- cgit v1.2.3 From 6dc2f0c7df6cefda5932ac8bcd9ca5ef45de36ee Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 2 Jun 2005 14:02:02 -0700 Subject: [PATCH] ppc64: cleanup iseries runlight support The iseries has a bar graph on the front panel that shows how busy it is. The operating system sets and clears a bit in the CTRL register to control it. Instead of going to the complexity of using a thread info bit, just set and clear it in the idle loop. Also create two helper functions, ppc64_runlatch_on and ppc64_runlatch_off. Finally don't use the short form of the SPR defines. Signed-off-by: Anton Blanchard Acked-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/entry.S | 9 --------- arch/ppc64/kernel/head.S | 10 +++++----- arch/ppc64/kernel/idle.c | 8 +++----- arch/ppc64/kernel/process.c | 3 --- arch/ppc64/kernel/sysfs.c | 8 ++------ include/asm-ppc64/processor.h | 27 +++++++++++++++++++++------ include/asm-ppc64/thread_info.h | 4 ++-- 7 files changed, 33 insertions(+), 36 deletions(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/entry.S b/arch/ppc64/kernel/entry.S index d3604056e1a9..b61572eb2a71 100644 --- a/arch/ppc64/kernel/entry.S +++ b/arch/ppc64/kernel/entry.S @@ -436,15 +436,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) REST_8GPRS(14, r1) REST_10GPRS(22, r1) -#ifdef CONFIG_PPC_ISERIES - clrrdi r7,r1,THREAD_SHIFT /* get current_thread_info() */ - ld r7,TI_FLAGS(r7) /* Get run light flag */ - mfspr r9,CTRLF - srdi r7,r7,TIF_RUN_LIGHT - insrdi r9,r7,1,63 /* Insert run light into CTRL */ - mtspr CTRLT,r9 -#endif - /* convert old thread to its task_struct for return value */ addi r3,r3,-THREAD ld r7,_NIP(r1) /* Return to _switch caller in new task */ diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S index 92a744c31ab1..346dbf606b5d 100644 --- a/arch/ppc64/kernel/head.S +++ b/arch/ppc64/kernel/head.S @@ -626,10 +626,10 @@ system_reset_iSeries: lhz r24,PACAPACAINDEX(r13) /* Get processor # */ cmpwi 0,r24,0 /* Are we processor 0? */ beq .__start_initialization_iSeries /* Start up the first processor */ - mfspr r4,CTRLF - li r5,RUNLATCH /* Turn off the run light */ + mfspr r4,SPRN_CTRLF + li r5,CTRL_RUNLATCH /* Turn off the run light */ andc r4,r4,r5 - mtspr CTRLT,r4 + mtspr SPRN_CTRLT,r4 1: HMT_LOW @@ -2082,9 +2082,9 @@ _GLOBAL(hmt_start_secondary) mfspr r4, HID0 ori r4, r4, 0x1 mtspr HID0, r4 - mfspr r4, CTRLF + mfspr r4, SPRN_CTRLF oris r4, r4, 0x40 - mtspr CTRLT, r4 + mtspr SPRN_CTRLT, r4 blr #endif diff --git a/arch/ppc64/kernel/idle.c b/arch/ppc64/kernel/idle.c index 6abc621d3ba0..f24ce2b87200 100644 --- a/arch/ppc64/kernel/idle.c +++ b/arch/ppc64/kernel/idle.c @@ -75,13 +75,9 @@ static int iSeries_idle(void) { struct paca_struct *lpaca; long oldval; - unsigned long CTRL; /* ensure iSeries run light will be out when idle */ - clear_thread_flag(TIF_RUN_LIGHT); - CTRL = mfspr(CTRLF); - CTRL &= ~RUNLATCH; - mtspr(CTRLT, CTRL); + ppc64_runlatch_off(); lpaca = get_paca(); @@ -111,7 +107,9 @@ static int iSeries_idle(void) } } + ppc64_runlatch_on(); schedule(); + ppc64_runlatch_off(); } return 0; diff --git a/arch/ppc64/kernel/process.c b/arch/ppc64/kernel/process.c index 8b0686122738..cdfecbeb331f 100644 --- a/arch/ppc64/kernel/process.c +++ b/arch/ppc64/kernel/process.c @@ -378,9 +378,6 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp, childregs->gpr[1] = sp + sizeof(struct pt_regs); p->thread.regs = NULL; /* no user register state */ clear_ti_thread_flag(p->thread_info, TIF_32BIT); -#ifdef CONFIG_PPC_ISERIES - set_ti_thread_flag(p->thread_info, TIF_RUN_LIGHT); -#endif } else { childregs->gpr[1] = usp; p->thread.regs = childregs; diff --git a/arch/ppc64/kernel/sysfs.c b/arch/ppc64/kernel/sysfs.c index 0925694c3ce5..c8fa6569b2fd 100644 --- a/arch/ppc64/kernel/sysfs.c +++ b/arch/ppc64/kernel/sysfs.c @@ -113,7 +113,6 @@ void ppc64_enable_pmcs(void) #ifdef CONFIG_PPC_PSERIES unsigned long set, reset; int ret; - unsigned int ctrl; #endif /* CONFIG_PPC_PSERIES */ /* Only need to enable them once */ @@ -167,11 +166,8 @@ void ppc64_enable_pmcs(void) * On SMT machines we have to set the run latch in the ctrl register * in order to make PMC6 spin. */ - if (cpu_has_feature(CPU_FTR_SMT)) { - ctrl = mfspr(CTRLF); - ctrl |= RUNLATCH; - mtspr(CTRLT, ctrl); - } + if (cpu_has_feature(CPU_FTR_SMT)) + ppc64_runlatch_on(); #endif /* CONFIG_PPC_PSERIES */ } diff --git a/include/asm-ppc64/processor.h b/include/asm-ppc64/processor.h index 5ba6aa45e1e2..809c634ba1df 100644 --- a/include/asm-ppc64/processor.h +++ b/include/asm-ppc64/processor.h @@ -164,6 +164,9 @@ #define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */ #define SPRN_XER 0x001 /* Fixed Point Exception Register */ #define SPRN_VRSAVE 0x100 /* Vector save */ +#define SPRN_CTRLF 0x088 +#define SPRN_CTRLT 0x098 +#define CTRL_RUNLATCH 0x1 /* Performance monitor SPRs */ #define SPRN_SIAR 780 @@ -279,12 +282,6 @@ #define XGLUE(a,b) a##b #define GLUE(a,b) XGLUE(a,b) -/* iSeries CTRL register (for runlatch) */ - -#define CTRLT 0x098 -#define CTRLF 0x088 -#define RUNLATCH 0x0001 - #ifdef __ASSEMBLY__ #define _GLOBAL(name) \ @@ -499,6 +496,24 @@ static inline void prefetchw(const void *x) #define HAVE_ARCH_PICK_MMAP_LAYOUT +static inline void ppc64_runlatch_on(void) +{ + unsigned long ctrl; + + ctrl = mfspr(SPRN_CTRLF); + ctrl |= CTRL_RUNLATCH; + mtspr(SPRN_CTRLT, ctrl); +} + +static inline void ppc64_runlatch_off(void) +{ + unsigned long ctrl; + + ctrl = mfspr(SPRN_CTRLF); + ctrl &= ~CTRL_RUNLATCH; + mtspr(SPRN_CTRLT, ctrl); +} + #endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ diff --git a/include/asm-ppc64/thread_info.h b/include/asm-ppc64/thread_info.h index 037b5e06083c..48b7900e90ec 100644 --- a/include/asm-ppc64/thread_info.h +++ b/include/asm-ppc64/thread_info.h @@ -96,7 +96,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_POLLING_NRFLAG 4 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_32BIT 5 /* 32 bit binary */ -#define TIF_RUN_LIGHT 6 /* iSeries run light */ +/* #define SPARE 6 */ #define TIF_ABI_PENDING 7 /* 32/64 bit switch needed */ #define TIF_SYSCALL_AUDIT 8 /* syscall auditing active */ #define TIF_SINGLESTEP 9 /* singlestepping active */ @@ -110,7 +110,7 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_NEED_RESCHED (1< Date: Thu, 2 Jun 2005 14:02:03 -0700 Subject: [PATCH] ppc64: remove decr_overclock Now that we have HZ=1000 there is much less of a need for decr_overclock. Remove it. Leave spread_lpevents but move it into iSeries_setup.c. We should look at making event spreading the default some day. Signed-off-by: Anton Blanchard Acked-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/iSeries_setup.c | 22 +++++++++++++++ arch/ppc64/kernel/setup.c | 56 +-------------------------------------- arch/ppc64/kernel/smp.c | 3 +-- 3 files changed, 24 insertions(+), 57 deletions(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/iSeries_setup.c b/arch/ppc64/kernel/iSeries_setup.c index da20120f2261..6d06eb550a3f 100644 --- a/arch/ppc64/kernel/iSeries_setup.c +++ b/arch/ppc64/kernel/iSeries_setup.c @@ -852,6 +852,28 @@ static int __init iSeries_src_init(void) late_initcall(iSeries_src_init); +static int set_spread_lpevents(char *str) +{ + unsigned long i; + unsigned long val = simple_strtoul(str, NULL, 0); + + /* + * The parameter is the number of processors to share in processing + * lp events. + */ + if (( val > 0) && (val <= NR_CPUS)) { + for (i = 1; i < val; ++i) + paca[i].lpqueue_ptr = paca[0].lpqueue_ptr; + + printk("lpevent processing spread over %ld processors\n", val); + } else { + printk("invalid spread_lpevents %ld\n", val); + } + + return 1; +} +__setup("spread_lpevents=", set_spread_lpevents); + void __init iSeries_early_setup(void) { iSeries_fixup_klimit(); diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c index 21c57f539c29..dce198d39328 100644 --- a/arch/ppc64/kernel/setup.c +++ b/arch/ppc64/kernel/setup.c @@ -103,11 +103,6 @@ extern void unflatten_device_tree(void); extern void smp_release_cpus(void); -unsigned long decr_overclock = 1; -unsigned long decr_overclock_proc0 = 1; -unsigned long decr_overclock_set = 0; -unsigned long decr_overclock_proc0_set = 0; - int have_of = 1; int boot_cpuid = 0; int boot_cpuid_phys = 0; @@ -1120,64 +1115,15 @@ void ppc64_dump_msg(unsigned int src, const char *msg) printk("[dump]%04x %s\n", src, msg); } -int set_spread_lpevents( char * str ) -{ - /* The parameter is the number of processors to share in processing lp events */ - unsigned long i; - unsigned long val = simple_strtoul( str, NULL, 0 ); - if ( ( val > 0 ) && ( val <= NR_CPUS ) ) { - for ( i=1; idefault_decr = tb_ticks_per_jiffy / decr_overclock_proc0; + lpaca->default_decr = tb_ticks_per_jiffy; lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy; } -int set_decr_overclock_proc0( char * str ) -{ - unsigned long val = simple_strtoul( str, NULL, 0 ); - if ( ( val >= 1 ) && ( val <= 48 ) ) { - decr_overclock_proc0_set = 1; - decr_overclock_proc0 = val; - printk("proc 0 decrementer overclock factor of %ld\n", val); - } - else - printk("invalid proc 0 decrementer overclock factor of %ld\n", val); - return 1; -} - -int set_decr_overclock( char * str ) -{ - unsigned long val = simple_strtoul( str, NULL, 0 ); - if ( ( val >= 1 ) && ( val <= 48 ) ) { - decr_overclock_set = 1; - decr_overclock = val; - printk("decrementer overclock factor of %ld\n", val); - } - else - printk("invalid decrementer overclock factor of %ld\n", val); - return 1; - -} - -__setup("spread_lpevents=", set_spread_lpevents ); -__setup("decr_overclock_proc0=", set_decr_overclock_proc0 ); -__setup("decr_overclock=", set_decr_overclock ); - #ifndef CONFIG_PPC_ISERIES /* * This function can be used by platforms to "find" legacy serial ports. diff --git a/arch/ppc64/kernel/smp.c b/arch/ppc64/kernel/smp.c index 3b906cd94037..9ef5d36d6b25 100644 --- a/arch/ppc64/kernel/smp.c +++ b/arch/ppc64/kernel/smp.c @@ -334,7 +334,6 @@ void smp_call_function_interrupt(void) } } -extern unsigned long decr_overclock; extern struct gettimeofday_struct do_gtod; struct thread_info *current_set[NR_CPUS]; @@ -491,7 +490,7 @@ int __devinit __cpu_up(unsigned int cpu) if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)) return -EINVAL; - paca[cpu].default_decr = tb_ticks_per_jiffy / decr_overclock; + paca[cpu].default_decr = tb_ticks_per_jiffy; if (!cpu_has_feature(CPU_FTR_SLB)) { void *tmp; -- cgit v1.2.3 From 8be3de3fd8469154a2b3e18a4712032dac5b4a53 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Fri, 3 Jun 2005 14:25:25 -0500 Subject: [PATCH] prom_find_machine_type typo breaks pSeries lpar boot A typo in prom_find_machine_type from Ben's recent patch "ppc64: Fix result code handling in prom_init" prevents pSeries LPAR systems from booting. Tested on a pSeries 570 and OpenPower 720 (both Power5 LPAR). Signed-off-by: Nathan Lynch Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/prom_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index 1ac531ba7056..b7683abfbe6a 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -1370,7 +1370,7 @@ static int __init prom_find_machine_type(void) } /* Default to pSeries. We need to know if we are running LPAR */ rtas = call_prom("finddevice", 1, 1, ADDR("/rtas")); - if (!PHANDLE_VALID(rtas)) { + if (PHANDLE_VALID(rtas)) { int x = prom_getproplen(rtas, "ibm,hypertas-functions"); if (x != PROM_ERROR) { prom_printf("Hypertas detected, assuming LPAR !\n"); -- cgit v1.2.3 From 7840e5e95c1a8622425f11454600a49b6c718886 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Wed, 8 Jun 2005 15:12:00 +1000 Subject: [PATCH] ppc64: print negative numbers correctly in boot wrapper if num has a value of -1, accessing the digits[] array will fail and the format string will be printed in funny way, or not at all. This happens if one prints negative numbers. Just change the code to match lib/vsprintf.c asm/div64.h cant be used because u64 maps to u32 for this build. Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- arch/ppc64/boot/prom.c | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/boot/prom.c b/arch/ppc64/boot/prom.c index 7b607d1862cb..d5218b15824e 100644 --- a/arch/ppc64/boot/prom.c +++ b/arch/ppc64/boot/prom.c @@ -11,6 +11,23 @@ #include #include +extern __u32 __div64_32(unsigned long long *dividend, __u32 divisor); + +/* The unnecessary pointer compare is there + * to check for type safety (n must be 64bit) + */ +# define do_div(n,base) ({ \ + __u32 __base = (base); \ + __u32 __rem; \ + (void)(((typeof((n)) *)0) == ((unsigned long long *)0)); \ + if (((n) >> 32) == 0) { \ + __rem = (__u32)(n) % __base; \ + (n) = (__u32)(n) / __base; \ + } else \ + __rem = __div64_32(&(n), __base); \ + __rem; \ + }) + int (*prom)(void *); void *chosen_handle; @@ -352,7 +369,7 @@ static int skip_atoi(const char **s) #define SPECIAL 32 /* 0x */ #define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */ -static char * number(char * str, long num, int base, int size, int precision, int type) +static char * number(char * str, unsigned long long num, int base, int size, int precision, int type) { char c,sign,tmp[66]; const char *digits="0123456789abcdefghijklmnopqrstuvwxyz"; @@ -367,9 +384,9 @@ static char * number(char * str, long num, int base, int size, int precision, in c = (type & ZEROPAD) ? '0' : ' '; sign = 0; if (type & SIGN) { - if (num < 0) { + if ((signed long long)num < 0) { sign = '-'; - num = -num; + num = - (signed long long)num; size--; } else if (type & PLUS) { sign = '+'; @@ -389,8 +406,7 @@ static char * number(char * str, long num, int base, int size, int precision, in if (num == 0) tmp[i++]='0'; else while (num != 0) { - tmp[i++] = digits[num % base]; - num /= base; + tmp[i++] = digits[do_div(num, base)]; } if (i > precision) precision = i; @@ -426,7 +442,7 @@ int sprintf(char * buf, const char *fmt, ...); int vsprintf(char *buf, const char *fmt, va_list args) { int len; - unsigned long num; + unsigned long long num; int i, base; char * str; const char *s; -- cgit v1.2.3 From 358c6ac0dd4ffa5e44d59d4008a2627aa2f02b6f Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Wed, 8 Jun 2005 15:33:43 +1000 Subject: [PATCH] ppc64 kprobes: don't eat dabr/iabr exceptions Kprobes was eating the hardware instruction and data address breakpoint exceptions. This patch fixes it; kprobes doesn't use those exceptions at all and should ignore them. Signed-off-by: Ananth N Mavinakayanahalli Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/kprobes.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index 103daaf73573..5a9f47b18c45 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -233,8 +233,6 @@ int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, */ preempt_disable(); switch (val) { - case DIE_IABR_MATCH: - case DIE_DABR_MATCH: case DIE_BPT: if (kprobe_handler(args->regs)) ret = NOTIFY_STOP; -- cgit v1.2.3 From 63224d1e8b4cf87cc7420201a8cb3b44b9bf0b40 Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Wed, 8 Jun 2005 15:49:41 -0700 Subject: [PATCH] ppc64 kprobes: correct kprobe registration return values Add stricter checks during kprobe registration. Return correct error value so insmod doesn't succeed. Also printk reason for registration failure. Signed-off-by: Ananth N Mavinakayanahalli Signed-off-by: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/kprobes.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index 5a9f47b18c45..8f3317244311 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -45,12 +45,17 @@ static struct pt_regs jprobe_saved_regs; int arch_prepare_kprobe(struct kprobe *p) { + int ret = 0; kprobe_opcode_t insn = *p->addr; - if (IS_MTMSRD(insn) || IS_RFID(insn)) - /* cannot put bp on RFID/MTMSRD */ - return 1; - return 0; + if ((unsigned long)p->addr & 0x03) { + printk("Attempt to register kprobe at an unaligned address\n"); + ret = -EINVAL; + } else if (IS_MTMSRD(insn) || IS_RFID(insn)) { + printk("Cannot register a kprobe on rfid or mtmsrd\n"); + ret = -EINVAL; + } + return ret; } void arch_copy_kprobe(struct kprobe *p) -- cgit v1.2.3 From f829fd23c87918374bac0d90404fe12f0e788d52 Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Wed, 8 Jun 2005 15:50:00 -0700 Subject: [PATCH] ppc64 kprobes: remove spurious MSR_SE masking Remove spurious MSR_SE reset during kprobe processing. single_step_exception() already does it for us. Reset it to be safe when executing the fault_handler. Signed-off-by: Ananth N Mavinakayanahalli Signed-off-by: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/kprobes.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index 8f3317244311..e950a2058a19 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -177,8 +177,6 @@ static void resume_execution(struct kprobe *p, struct pt_regs *regs) ret = emulate_step(regs, p->ainsn.insn[0]); if (ret == 0) regs->nip = (unsigned long)p->addr + 4; - - regs->msr &= ~MSR_SE; } static inline int post_kprobe_handler(struct pt_regs *regs) @@ -215,6 +213,7 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) if (kprobe_status & KPROBE_HIT_SS) { resume_execution(current_kprobe, regs); + regs->msr &= ~MSR_SE; regs->msr |= kprobe_saved_msr; unlock_kprobes(); -- cgit v1.2.3 From ce10d979053379553757c3b178a138facaddff82 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 8 Jun 2005 21:59:15 +1000 Subject: [PATCH] ppc64: Fix PER_LINUX32 behaviour This patch fixes some bugs in the ppc64 PER_LINUX32 implementation, noted by Juergen Kreileder: * uname(2) doesn't respect PER_LINUX32, it returns 'ppc64' instead of 'ppc' * Child processes of a PER_LINUX32 process don't inherit PER_LINUX32 Along the way I took the opportunity to move things around so that sys_ppc32.c only has 32-bit syscall emulation functions and to remove the obsolete "fakeppc" command line option. Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/misc.S | 2 +- arch/ppc64/kernel/sys_ppc32.c | 70 ++++++++++++++++++++----------------------- arch/ppc64/kernel/syscalls.c | 33 ++++++++++++-------- include/asm-ppc64/elf.h | 4 +-- 4 files changed, 56 insertions(+), 53 deletions(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S index b944717c1dbd..e3c73b3425dc 100644 --- a/arch/ppc64/kernel/misc.S +++ b/arch/ppc64/kernel/misc.S @@ -792,7 +792,7 @@ _GLOBAL(sys_call_table32) .llong .compat_sys_newstat .llong .compat_sys_newlstat .llong .compat_sys_newfstat - .llong .sys_uname + .llong .sys32_uname .llong .sys_ni_syscall /* 110 old iopl syscall */ .llong .sys_vhangup .llong .sys_ni_syscall /* old idle syscall */ diff --git a/arch/ppc64/kernel/sys_ppc32.c b/arch/ppc64/kernel/sys_ppc32.c index 7cf7a9600025..9c8e317c598d 100644 --- a/arch/ppc64/kernel/sys_ppc32.c +++ b/arch/ppc64/kernel/sys_ppc32.c @@ -791,31 +791,6 @@ asmlinkage int sys32_pciconfig_iobase(u32 which, u32 in_bus, u32 in_devfn) } -asmlinkage int ppc64_newuname(struct new_utsname __user * name) -{ - int errno = sys_newuname(name); - - if (current->personality == PER_LINUX32 && !errno) { - if(copy_to_user(name->machine, "ppc\0\0", 8)) { - errno = -EFAULT; - } - } - return errno; -} - -asmlinkage int ppc64_personality(unsigned long personality) -{ - int ret; - if (current->personality == PER_LINUX32 && personality == PER_LINUX) - personality = PER_LINUX32; - ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; - return ret; -} - - - /* Note: it is necessary to treat mode as an unsigned int, * with the corresponding cast to a signed int to insure that the * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode) @@ -1158,26 +1133,47 @@ asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args) } #endif +asmlinkage int sys32_uname(struct old_utsname __user * name) +{ + int err = 0; + + down_read(&uts_sem); + if (copy_to_user(name, &system_utsname, sizeof(*name))) + err = -EFAULT; + up_read(&uts_sem); + if (!err && personality(current->personality) == PER_LINUX32) { + /* change "ppc64" to "ppc" */ + if (__put_user(0, name->machine + 3) + || __put_user(0, name->machine + 4)) + err = -EFAULT; + } + return err; +} + asmlinkage int sys32_olduname(struct oldold_utsname __user * name) { int error; - - if (!name) - return -EFAULT; + if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname))) return -EFAULT; down_read(&uts_sem); error = __copy_to_user(&name->sysname,&system_utsname.sysname,__OLD_UTS_LEN); - error -= __put_user(0,name->sysname+__OLD_UTS_LEN); - error -= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN); - error -= __put_user(0,name->nodename+__OLD_UTS_LEN); - error -= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN); - error -= __put_user(0,name->release+__OLD_UTS_LEN); - error -= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN); - error -= __put_user(0,name->version+__OLD_UTS_LEN); - error -= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN); - error = __put_user(0,name->machine+__OLD_UTS_LEN); + error |= __put_user(0,name->sysname+__OLD_UTS_LEN); + error |= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN); + error |= __put_user(0,name->nodename+__OLD_UTS_LEN); + error |= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN); + error |= __put_user(0,name->release+__OLD_UTS_LEN); + error |= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN); + error |= __put_user(0,name->version+__OLD_UTS_LEN); + error |= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN); + error |= __put_user(0,name->machine+__OLD_UTS_LEN); + if (personality(current->personality) == PER_LINUX32) { + /* change "ppc64" to "ppc" */ + error |= __put_user(0, name->machine + 3); + error |= __put_user(0, name->machine + 4); + } + up_read(&uts_sem); error = error ? -EFAULT : 0; diff --git a/arch/ppc64/kernel/syscalls.c b/arch/ppc64/kernel/syscalls.c index f2865ff8d2f9..a8cbb202b8cd 100644 --- a/arch/ppc64/kernel/syscalls.c +++ b/arch/ppc64/kernel/syscalls.c @@ -199,24 +199,33 @@ out: return ret; } -static int __init set_fakeppc(char *str) +long ppc64_personality(unsigned long personality) { - if (*str) - return 0; - init_task.personality = PER_LINUX32; - return 1; + long ret; + + if (personality(current->personality) == PER_LINUX32 + && personality == PER_LINUX) + personality = PER_LINUX32; + ret = sys_personality(personality); + if (ret == PER_LINUX32) + ret = PER_LINUX; + return ret; } -__setup("fakeppc", set_fakeppc); -asmlinkage int sys_uname(struct old_utsname __user * name) +long ppc64_newuname(struct new_utsname __user * name) { - int err = -EFAULT; - + int err = 0; + down_read(&uts_sem); - if (name && !copy_to_user(name, &system_utsname, sizeof (*name))) - err = 0; + if (copy_to_user(name, &system_utsname, sizeof(*name))) + err = -EFAULT; up_read(&uts_sem); - + if (!err && personality(current->personality) == PER_LINUX32) { + /* change ppc64 to ppc */ + if (__put_user(0, name->machine + 3) + || __put_user(0, name->machine + 4)) + err = -EFAULT; + } return err; } diff --git a/include/asm-ppc64/elf.h b/include/asm-ppc64/elf.h index 6c42d61bedd1..085eedb956fe 100644 --- a/include/asm-ppc64/elf.h +++ b/include/asm-ppc64/elf.h @@ -221,9 +221,7 @@ do { \ set_thread_flag(TIF_ABI_PENDING); \ else \ clear_thread_flag(TIF_ABI_PENDING); \ - if (ibcs2) \ - set_personality(PER_SVR4); \ - else if (current->personality != PER_LINUX32) \ + if (personality(current->personality) != PER_LINUX32) \ set_personality(PER_LINUX); \ } while (0) -- cgit v1.2.3 From 4845f3333765b732aa2d7ea6d72fd03cfec4fbf3 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 14 Jun 2005 22:19:24 +1000 Subject: [PATCH] ppc64: update example configs Here is a patch to update the example configs in arch/ppc64/configs. Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/ppc64/configs/g5_defconfig | 76 +++++++++++++++----------- arch/ppc64/configs/iSeries_defconfig | 62 ++++++++++++--------- arch/ppc64/configs/maple_defconfig | 70 ++++++++++++++++-------- arch/ppc64/configs/pSeries_defconfig | 102 ++++++++++++++++++++++------------- 4 files changed, 196 insertions(+), 114 deletions(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/configs/g5_defconfig b/arch/ppc64/configs/g5_defconfig index 0f90df0b3f9c..1eb33398648e 100644 --- a/arch/ppc64/configs/g5_defconfig +++ b/arch/ppc64/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11 -# Thu Mar 10 16:47:04 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 16:59:20 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -31,19 +32,20 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=17 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 @@ -87,6 +89,8 @@ CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -97,6 +101,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # CONFIG_HOTPLUG_CPU is not set # @@ -104,10 +109,6 @@ CONFIG_PCI_NAMES=y # # CONFIG_PCCARD is not set -# -# PC-card bridges -# - # # PCI Hotplug Support # @@ -293,7 +294,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -301,7 +301,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -310,6 +309,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -332,6 +332,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support @@ -394,7 +395,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -564,6 +564,8 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set CONFIG_TIGON3=m +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -630,18 +632,6 @@ CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set - # # Input Device Drivers # @@ -659,6 +649,16 @@ CONFIG_INPUT_MOUSE=y # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + # # Character devices # @@ -676,6 +676,7 @@ CONFIG_HW_CONSOLE=y # Non-8250 serial port support # # CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -698,9 +699,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # +CONFIG_AGP=m +CONFIG_AGP_UNINORTH=m # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set # # TPM devices @@ -730,12 +734,11 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_KEYWEST=y -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -772,6 +775,7 @@ CONFIG_I2C_KEYWEST=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -785,6 +789,7 @@ CONFIG_I2C_KEYWEST=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -817,6 +822,11 @@ CONFIG_I2C_KEYWEST=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -830,6 +840,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set CONFIG_FB_RIVA=y # CONFIG_FB_RIVA_I2C is not set # CONFIG_FB_RIVA_DEBUG is not set @@ -847,6 +858,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -880,6 +892,8 @@ CONFIG_LCD_DEVICE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -890,8 +904,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -917,7 +929,6 @@ CONFIG_USB_PRINTER=y # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_RW_DETECT=y CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y @@ -1004,8 +1015,10 @@ CONFIG_USB_MON=y # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m @@ -1034,6 +1047,7 @@ CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y CONFIG_USB_SERIAL_TI=m @@ -1270,11 +1284,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y -# CONFIG_PRINTK_TIME is not set +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/ppc64/configs/iSeries_defconfig index a39e9d2e25da..f6a2b99afd63 100644 --- a/arch/ppc64/configs/iSeries_defconfig +++ b/arch/ppc64/configs/iSeries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:52 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 17:01:28 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,29 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -79,6 +85,8 @@ CONFIG_NR_CPUS=32 CONFIG_GENERIC_HARDIRQS=y CONFIG_MSCHUNKS=y CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -89,16 +97,13 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set -# -# PC-card bridges -# - # # PCI Hotplug Support # @@ -210,7 +215,6 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -219,7 +223,6 @@ CONFIG_SCSI_IBMVSCSI=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -228,6 +231,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -250,6 +254,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support @@ -280,7 +285,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -445,7 +449,6 @@ CONFIG_PCNET32=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -471,6 +474,7 @@ CONFIG_E1000=m # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -538,14 +542,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - # # Input Device Drivers # @@ -555,6 +551,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + # # Character devices # @@ -570,6 +572,7 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_SERIAL_CORE=m CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -592,9 +595,16 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -633,13 +643,9 @@ CONFIG_MAX_RAW_DEVS=256 # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -848,10 +854,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -881,6 +890,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m diff --git a/arch/ppc64/configs/maple_defconfig b/arch/ppc64/configs/maple_defconfig index cf527501915c..8051b0f47b6f 100644 --- a/arch/ppc64/configs/maple_defconfig +++ b/arch/ppc64/configs/maple_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:53 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 17:12:48 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,28 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_AUDIT is not set # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -84,6 +89,8 @@ CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -94,16 +101,13 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set -# -# PC-card bridges -# - # # PCI Hotplug Support # @@ -261,7 +265,6 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -376,6 +379,8 @@ CONFIG_E1000=y # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -431,14 +436,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - # # Input Device Drivers # @@ -448,6 +445,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + # # Character devices # @@ -469,7 +472,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -492,8 +495,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -518,8 +528,8 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -545,7 +555,9 @@ CONFIG_I2C_AMD8111=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -556,9 +568,11 @@ CONFIG_I2C_AMD8111=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -568,6 +582,7 @@ CONFIG_I2C_AMD8111=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -615,6 +630,8 @@ CONFIG_DUMMY_CONSOLE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -625,8 +642,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -635,6 +650,8 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -688,6 +705,7 @@ CONFIG_USB_HIDINPUT=y CONFIG_USB_PEGASUS=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y # # USB port drivers @@ -699,8 +717,10 @@ CONFIG_USB_PEGASUS=y CONFIG_USB_SERIAL=y # CONFIG_USB_SERIAL_CONSOLE is not set CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set CONFIG_USB_SERIAL_CYPRESS_M8=m # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set @@ -729,6 +749,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set CONFIG_USB_SERIAL_TI=m # CONFIG_USB_SERIAL_CYBERJACK is not set @@ -750,6 +771,7 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -936,10 +958,13 @@ CONFIG_NLS_UTF8=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set CONFIG_DEBUG_SLAB=y +# CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -971,6 +996,7 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/ppc64/configs/pSeries_defconfig index 4fecf237d5c9..3eb5ef25d3a3 100644 --- a/arch/ppc64/configs/pSeries_defconfig +++ b/arch/ppc64/configs/pSeries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:54 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 17:13:47 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,29 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_CPUSETS=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -89,9 +95,12 @@ CONFIG_SCHED_SMT=y CONFIG_EEH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=m CONFIG_SCANLOG=m CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -102,6 +111,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_HOTPLUG_CPU=y # @@ -109,10 +119,6 @@ CONFIG_HOTPLUG_CPU=y # # CONFIG_PCCARD is not set -# -# PC-card bridges -# - # # PCI Hotplug Support # @@ -147,11 +153,10 @@ CONFIG_FW_LOADER=y # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # @@ -293,7 +298,6 @@ CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -310,7 +314,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_IPR=y CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -319,6 +322,7 @@ CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -341,6 +345,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -371,7 +377,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -539,7 +544,6 @@ CONFIG_PCNET32=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -565,6 +569,8 @@ CONFIG_E1000=y # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -635,20 +641,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set - # # Input Device Drivers # @@ -668,6 +660,18 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_UINPUT is not set +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + # # Character devices # @@ -689,8 +693,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -718,9 +722,16 @@ CONFIG_HVCS=m # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=1024 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -745,8 +756,8 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -773,7 +784,9 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -784,9 +797,11 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -796,6 +811,7 @@ CONFIG_I2C_ALGOBIT=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -828,8 +844,13 @@ CONFIG_I2C_ALGOBIT=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set @@ -838,6 +859,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y @@ -858,6 +880,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -891,6 +914,8 @@ CONFIG_LCD_DEVICE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -901,8 +926,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -911,6 +934,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -926,12 +951,11 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set @@ -975,6 +999,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y # # USB port drivers @@ -1000,6 +1025,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -1208,10 +1234,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -1243,6 +1272,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m -- cgit v1.2.3 From 1016888fb69662936b32ab767c7419a3be9a69d3 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Tue, 14 Jun 2005 13:52:19 -0700 Subject: [PATCH] update ppc64 defconfig enable cpusets enable new lpfc and jsm drivers enable new dm-multipath leave new agp disabled disable rivafb, it does not handle the cards in G5 models (FX5200 as example) the new nvidiafb doesnt work on bigendian, yet Signed-off-by: Olaf Hering Acked-by: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc64/defconfig | 104 +++++++++++++++++++++++++++++++++------------------ 1 file changed, 67 insertions(+), 37 deletions(-) (limited to 'arch/ppc64') diff --git a/arch/ppc64/defconfig b/arch/ppc64/defconfig index 537b1cc82eab..2f31bf3046f9 100644 --- a/arch/ppc64/defconfig +++ b/arch/ppc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:51 2005 +# Linux kernel version: 2.6.12-rc5-git9 +# Sun Jun 5 09:26:47 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,28 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_AUDIT is not set CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_CPUSETS=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -91,9 +96,12 @@ CONFIG_DISCONTIGMEM=y CONFIG_EEH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=m CONFIG_SCANLOG=m CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -104,6 +112,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_NAMES is not set +# CONFIG_PCI_DEBUG is not set CONFIG_HOTPLUG_CPU=y # @@ -111,10 +120,6 @@ CONFIG_HOTPLUG_CPU=y # # CONFIG_PCCARD is not set -# -# PC-card bridges -# - # # PCI Hotplug Support # @@ -149,11 +154,10 @@ CONFIG_FW_LOADER=y # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # @@ -301,6 +305,7 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set # CONFIG_SCSI_SATA_SIS is not set @@ -310,7 +315,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -327,7 +331,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_IPR=y CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -336,6 +339,7 @@ CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set CONFIG_SCSI_DEBUG=m @@ -358,6 +362,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -405,6 +411,7 @@ CONFIG_IEEE1394_AMDTP=m # CONFIG_ADB=y CONFIG_ADB_PMU=y +CONFIG_PMAC_SMU=y # CONFIG_PMAC_PBOOK is not set # CONFIG_PMAC_BACKLIGHT is not set # CONFIG_INPUT_ADBHID is not set @@ -420,7 +427,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -588,7 +594,6 @@ CONFIG_PCNET32=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -614,6 +619,8 @@ CONFIG_E1000=y # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -682,20 +689,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set - # # Input Device Drivers # @@ -715,6 +708,18 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_UINPUT is not set +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + # # Character devices # @@ -738,6 +743,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_ICOM=m +CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -766,9 +772,16 @@ CONFIG_HVCS=m # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -793,9 +806,9 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_KEYWEST=y -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -822,7 +835,9 @@ CONFIG_I2C_KEYWEST=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -833,9 +848,11 @@ CONFIG_I2C_KEYWEST=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -845,6 +862,7 @@ CONFIG_I2C_KEYWEST=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -877,6 +895,11 @@ CONFIG_I2C_KEYWEST=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -890,9 +913,8 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set -CONFIG_FB_RIVA=y -CONFIG_FB_RIVA_I2C=y -# CONFIG_FB_RIVA_DEBUG is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y @@ -913,6 +935,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -946,6 +969,8 @@ CONFIG_LCD_DEVICE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -956,8 +981,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -966,6 +989,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -981,12 +1006,11 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_RW_DETECT=y # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set @@ -1030,6 +1054,7 @@ CONFIG_USB_HIDDEV=y CONFIG_USB_PEGASUS=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set # # USB port drivers @@ -1055,6 +1080,7 @@ CONFIG_USB_PEGASUS=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -1276,10 +1302,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -1311,6 +1340,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m -- cgit v1.2.3