From 09df7c4c8097ca4a11393b1edd4997d786daad52 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Mon, 10 Mar 2014 19:32:22 -0400 Subject: x86: Remove CONFIG_X86_OOSTORE This was an optimization that made memcpy type benchmarks a little faster on ancient (Circa 1998) IDT Winchip CPUs. In real-life workloads, it wasn't even noticable, and I doubt anyone is running benchmarks on 16 year old silicon any more. Given this code has likely seen very little use over the last decade, let's just remove it. Signed-off-by: Dave Jones Signed-off-by: Linus Torvalds --- arch/x86/Kconfig.cpu | 4 - arch/x86/include/asm/barrier.h | 8 +- arch/x86/include/asm/io.h | 2 +- arch/x86/include/asm/spinlock.h | 5 +- arch/x86/kernel/cpu/centaur.c | 272 ---------------------------------------- arch/x86/um/asm/barrier.h | 4 - 6 files changed, 5 insertions(+), 290 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index c026cca5602c..f3aaf231b4e5 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -341,10 +341,6 @@ config X86_USE_3DNOW def_bool y depends on (MCYRIXIII || MK7 || MGEODE_LX) && !UML -config X86_OOSTORE - def_bool y - depends on (MWINCHIP3D || MWINCHIPC6) && MTRR - # # P6_NOPs are a relatively minor optimization that require a family >= # 6 processor, except that it is broken on certain VIA chips. diff --git a/arch/x86/include/asm/barrier.h b/arch/x86/include/asm/barrier.h index 04a48903b2eb..69bbb4845020 100644 --- a/arch/x86/include/asm/barrier.h +++ b/arch/x86/include/asm/barrier.h @@ -85,11 +85,7 @@ #else # define smp_rmb() barrier() #endif -#ifdef CONFIG_X86_OOSTORE -# define smp_wmb() wmb() -#else -# define smp_wmb() barrier() -#endif +#define smp_wmb() barrier() #define smp_read_barrier_depends() read_barrier_depends() #define set_mb(var, value) do { (void)xchg(&var, value); } while (0) #else /* !SMP */ @@ -100,7 +96,7 @@ #define set_mb(var, value) do { var = value; barrier(); } while (0) #endif /* SMP */ -#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE) +#if defined(CONFIG_X86_PPRO_FENCE) /* * For either of these options x86 doesn't have a strong TSO memory diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h index 34f69cb9350a..91d9c69a629e 100644 --- a/arch/x86/include/asm/io.h +++ b/arch/x86/include/asm/io.h @@ -237,7 +237,7 @@ memcpy_toio(volatile void __iomem *dst, const void *src, size_t count) static inline void flush_write_buffers(void) { -#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE) +#if defined(CONFIG_X86_PPRO_FENCE) asm volatile("lock; addl $0,0(%%esp)": : :"memory"); #endif } diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h index bf156ded74b5..0f62f5482d91 100644 --- a/arch/x86/include/asm/spinlock.h +++ b/arch/x86/include/asm/spinlock.h @@ -26,10 +26,9 @@ # define LOCK_PTR_REG "D" #endif -#if defined(CONFIG_X86_32) && \ - (defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE)) +#if defined(CONFIG_X86_32) && (defined(CONFIG_X86_PPRO_FENCE)) /* - * On PPro SMP or if we are using OOSTORE, we use a locked operation to unlock + * On PPro SMP, we use a locked operation to unlock * (PPro errata 66, 92) */ # define UNLOCK_LOCK_PREFIX LOCK_PREFIX diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c index 8779edab684e..d8fba5c15fbd 100644 --- a/arch/x86/kernel/cpu/centaur.c +++ b/arch/x86/kernel/cpu/centaur.c @@ -8,236 +8,6 @@ #include "cpu.h" -#ifdef CONFIG_X86_OOSTORE - -static u32 power2(u32 x) -{ - u32 s = 1; - - while (s <= x) - s <<= 1; - - return s >>= 1; -} - - -/* - * Set up an actual MCR - */ -static void centaur_mcr_insert(int reg, u32 base, u32 size, int key) -{ - u32 lo, hi; - - hi = base & ~0xFFF; - lo = ~(size-1); /* Size is a power of 2 so this makes a mask */ - lo &= ~0xFFF; /* Remove the ctrl value bits */ - lo |= key; /* Attribute we wish to set */ - wrmsr(reg+MSR_IDT_MCR0, lo, hi); - mtrr_centaur_report_mcr(reg, lo, hi); /* Tell the mtrr driver */ -} - -/* - * Figure what we can cover with MCR's - * - * Shortcut: We know you can't put 4Gig of RAM on a winchip - */ -static u32 ramtop(void) -{ - u32 clip = 0xFFFFFFFFUL; - u32 top = 0; - int i; - - for (i = 0; i < e820.nr_map; i++) { - unsigned long start, end; - - if (e820.map[i].addr > 0xFFFFFFFFUL) - continue; - /* - * Don't MCR over reserved space. Ignore the ISA hole - * we frob around that catastrophe already - */ - if (e820.map[i].type == E820_RESERVED) { - if (e820.map[i].addr >= 0x100000UL && - e820.map[i].addr < clip) - clip = e820.map[i].addr; - continue; - } - start = e820.map[i].addr; - end = e820.map[i].addr + e820.map[i].size; - if (start >= end) - continue; - if (end > top) - top = end; - } - /* - * Everything below 'top' should be RAM except for the ISA hole. - * Because of the limited MCR's we want to map NV/ACPI into our - * MCR range for gunk in RAM - * - * Clip might cause us to MCR insufficient RAM but that is an - * acceptable failure mode and should only bite obscure boxes with - * a VESA hole at 15Mb - * - * The second case Clip sometimes kicks in is when the EBDA is marked - * as reserved. Again we fail safe with reasonable results - */ - if (top > clip) - top = clip; - - return top; -} - -/* - * Compute a set of MCR's to give maximum coverage - */ -static int centaur_mcr_compute(int nr, int key) -{ - u32 mem = ramtop(); - u32 root = power2(mem); - u32 base = root; - u32 top = root; - u32 floor = 0; - int ct = 0; - - while (ct < nr) { - u32 fspace = 0; - u32 high; - u32 low; - - /* - * Find the largest block we will fill going upwards - */ - high = power2(mem-top); - - /* - * Find the largest block we will fill going downwards - */ - low = base/2; - - /* - * Don't fill below 1Mb going downwards as there - * is an ISA hole in the way. - */ - if (base <= 1024*1024) - low = 0; - - /* - * See how much space we could cover by filling below - * the ISA hole - */ - - if (floor == 0) - fspace = 512*1024; - else if (floor == 512*1024) - fspace = 128*1024; - - /* And forget ROM space */ - - /* - * Now install the largest coverage we get - */ - if (fspace > high && fspace > low) { - centaur_mcr_insert(ct, floor, fspace, key); - floor += fspace; - } else if (high > low) { - centaur_mcr_insert(ct, top, high, key); - top += high; - } else if (low > 0) { - base -= low; - centaur_mcr_insert(ct, base, low, key); - } else - break; - ct++; - } - /* - * We loaded ct values. We now need to set the mask. The caller - * must do this bit. - */ - return ct; -} - -static void centaur_create_optimal_mcr(void) -{ - int used; - int i; - - /* - * Allocate up to 6 mcrs to mark as much of ram as possible - * as write combining and weak write ordered. - * - * To experiment with: Linux never uses stack operations for - * mmio spaces so we could globally enable stack operation wc - * - * Load the registers with type 31 - full write combining, all - * writes weakly ordered. - */ - used = centaur_mcr_compute(6, 31); - - /* - * Wipe unused MCRs - */ - for (i = used; i < 8; i++) - wrmsr(MSR_IDT_MCR0+i, 0, 0); -} - -static void winchip2_create_optimal_mcr(void) -{ - u32 lo, hi; - int used; - int i; - - /* - * Allocate up to 6 mcrs to mark as much of ram as possible - * as write combining, weak store ordered. - * - * Load the registers with type 25 - * 8 - weak write ordering - * 16 - weak read ordering - * 1 - write combining - */ - used = centaur_mcr_compute(6, 25); - - /* - * Mark the registers we are using. - */ - rdmsr(MSR_IDT_MCR_CTRL, lo, hi); - for (i = 0; i < used; i++) - lo |= 1<<(9+i); - wrmsr(MSR_IDT_MCR_CTRL, lo, hi); - - /* - * Wipe unused MCRs - */ - - for (i = used; i < 8; i++) - wrmsr(MSR_IDT_MCR0+i, 0, 0); -} - -/* - * Handle the MCR key on the Winchip 2. - */ -static void winchip2_unprotect_mcr(void) -{ - u32 lo, hi; - u32 key; - - rdmsr(MSR_IDT_MCR_CTRL, lo, hi); - lo &= ~0x1C0; /* blank bits 8-6 */ - key = (lo>>17) & 7; - lo |= key<<6; /* replace with unlock key */ - wrmsr(MSR_IDT_MCR_CTRL, lo, hi); -} - -static void winchip2_protect_mcr(void) -{ - u32 lo, hi; - - rdmsr(MSR_IDT_MCR_CTRL, lo, hi); - lo &= ~0x1C0; /* blank bits 8-6 */ - wrmsr(MSR_IDT_MCR_CTRL, lo, hi); -} -#endif /* CONFIG_X86_OOSTORE */ - #define ACE_PRESENT (1 << 6) #define ACE_ENABLED (1 << 7) #define ACE_FCR (1 << 28) /* MSR_VIA_FCR */ @@ -362,20 +132,6 @@ static void init_centaur(struct cpuinfo_x86 *c) fcr_clr = DPDC; printk(KERN_NOTICE "Disabling bugged TSC.\n"); clear_cpu_cap(c, X86_FEATURE_TSC); -#ifdef CONFIG_X86_OOSTORE - centaur_create_optimal_mcr(); - /* - * Enable: - * write combining on non-stack, non-string - * write combining on string, all types - * weak write ordering - * - * The C6 original lacks weak read order - * - * Note 0x120 is write only on Winchip 1 - */ - wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0); -#endif break; case 8: switch (c->x86_mask) { @@ -392,40 +148,12 @@ static void init_centaur(struct cpuinfo_x86 *c) fcr_set = ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK| E2MMX|EAMD3D; fcr_clr = DPDC; -#ifdef CONFIG_X86_OOSTORE - winchip2_unprotect_mcr(); - winchip2_create_optimal_mcr(); - rdmsr(MSR_IDT_MCR_CTRL, lo, hi); - /* - * Enable: - * write combining on non-stack, non-string - * write combining on string, all types - * weak write ordering - */ - lo |= 31; - wrmsr(MSR_IDT_MCR_CTRL, lo, hi); - winchip2_protect_mcr(); -#endif break; case 9: name = "3"; fcr_set = ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK| E2MMX|EAMD3D; fcr_clr = DPDC; -#ifdef CONFIG_X86_OOSTORE - winchip2_unprotect_mcr(); - winchip2_create_optimal_mcr(); - rdmsr(MSR_IDT_MCR_CTRL, lo, hi); - /* - * Enable: - * write combining on non-stack, non-string - * write combining on string, all types - * weak write ordering - */ - lo |= 31; - wrmsr(MSR_IDT_MCR_CTRL, lo, hi); - winchip2_protect_mcr(); -#endif break; default: name = "??"; diff --git a/arch/x86/um/asm/barrier.h b/arch/x86/um/asm/barrier.h index 7d01b8c56c00..cc04e67bfd05 100644 --- a/arch/x86/um/asm/barrier.h +++ b/arch/x86/um/asm/barrier.h @@ -40,11 +40,7 @@ #define smp_rmb() barrier() #endif /* CONFIG_X86_PPRO_FENCE */ -#ifdef CONFIG_X86_OOSTORE -#define smp_wmb() wmb() -#else /* CONFIG_X86_OOSTORE */ #define smp_wmb() barrier() -#endif /* CONFIG_X86_OOSTORE */ #define smp_read_barrier_depends() read_barrier_depends() #define set_mb(var, value) do { (void)xchg(&var, value); } while (0) -- cgit v1.2.3