From 04b75b10dceadf937e3707ecc3dfccf6a076fd29 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Tue, 19 May 2009 14:52:40 +1000 Subject: m68knommu: simplify ColdFire "timers" clock initialization The ColdFire "timers" clock setup can be simplified. There is really no need for the flexible per-platform setup code. The clock interrupt can be hard defined per CPU platform (in CPU include files). This makes the actual timer code simpler. Signed-off-by: Greg Ungerer --- arch/m68k/include/asm/m5206sim.h | 13 ++++++----- arch/m68k/include/asm/m5249sim.h | 6 +++++ arch/m68k/include/asm/m5272sim.h | 5 ++++ arch/m68k/include/asm/m5307sim.h | 6 +++++ arch/m68k/include/asm/m5407sim.h | 5 ++++ arch/m68knommu/platform/5206/config.c | 25 +++++++++----------- arch/m68knommu/platform/5206e/config.c | 25 +++++++++----------- arch/m68knommu/platform/5249/config.c | 26 +++++++++------------ arch/m68knommu/platform/5272/config.c | 22 +++++++---------- arch/m68knommu/platform/5307/config.c | 35 +++++++++------------------ arch/m68knommu/platform/5407/config.c | 39 ++++++++++--------------------- arch/m68knommu/platform/coldfire/timers.c | 17 ++++---------- 12 files changed, 97 insertions(+), 127 deletions(-) (limited to 'arch') diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h index b50061aaf8f0..9c384e294af9 100644 --- a/arch/m68k/include/asm/m5206sim.h +++ b/arch/m68k/include/asm/m5206sim.h @@ -88,12 +88,19 @@ #define MCFSIM_PADDR (MCF_MBAR + 0x1c5) /* Parallel Direction (r/w) */ #define MCFSIM_PADAT (MCF_MBAR + 0x1c9) /* Parallel Port Value (r/w) */ +/* + * Define system peripheral IRQ usage. + */ +#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ +#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ + /* * Generic GPIO */ #define MCFGPIO_PIN_MAX 8 #define MCFGPIO_IRQ_VECBASE -1 #define MCFGPIO_IRQ_MAX -1 + /* * Some symbol defines for the Parallel Port Pin Assignment Register */ @@ -117,11 +124,5 @@ #define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */ #endif -/* - * Let the common interrupt handler code know that the ColdFire 5206* - * family of CPU's only has a 16bit sized IMR register. - */ -#define MCFSIM_IMR_IS_16BITS - /****************************************************************************/ #endif /* m5206sim_h */ diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h index 36ed31bbf6cb..8d76a1930718 100644 --- a/arch/m68k/include/asm/m5249sim.h +++ b/arch/m68k/include/asm/m5249sim.h @@ -70,6 +70,12 @@ #define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ +/* + * Define system peripheral IRQ usage. + */ +#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ +#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ + /* * General purpose IO registers (in MBAR2). */ diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h index 0665ba1a5d3c..469686ffc4af 100644 --- a/arch/m68k/include/asm/m5272sim.h +++ b/arch/m68k/include/asm/m5272sim.h @@ -73,6 +73,11 @@ #define MCFSIM_PCDAT (MCF_MBAR + 0x96) /* Port C Data (r/w) */ #define MCFSIM_PDCNT (MCF_MBAR + 0x98) /* Port D Control (r/w) */ +/* + * Define system peripheral IRQ usage. + */ +#define MCF_IRQ_TIMER 69 /* Timer0, Level 6 */ +#define MCF_IRQ_PROFILER 70 /* Timer1, Level 7 */ /* * Generic GPIO support diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h index 60946225699d..c6830e5b54ce 100644 --- a/arch/m68k/include/asm/m5307sim.h +++ b/arch/m68k/include/asm/m5307sim.h @@ -124,6 +124,7 @@ #define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ + /* * Some symbol defines for the Parallel Port Pin Assignment Register */ @@ -139,6 +140,11 @@ #define IRQ3_LEVEL6 0x40 #define IRQ1_LEVEL2 0x20 +/* + * Define system peripheral IRQ usage. + */ +#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ +#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ /* * Define the Cache register flags. diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h index 3c4bd5f08cde..c399abbf953c 100644 --- a/arch/m68k/include/asm/m5407sim.h +++ b/arch/m68k/include/asm/m5407sim.h @@ -111,6 +111,11 @@ #define IRQ3_LEVEL6 0x40 #define IRQ1_LEVEL2 0x20 +/* + * Define system peripheral IRQ usage. + */ +#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ +#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ /* * Define the Cache register flags. diff --git a/arch/m68knommu/platform/5206/config.c b/arch/m68knommu/platform/5206/config.c index 0dce2383320d..c1d24796ef2f 100644 --- a/arch/m68knommu/platform/5206/config.c +++ b/arch/m68knommu/platform/5206/config.c @@ -68,21 +68,17 @@ static void __init m5206_uarts_init(void) /***************************************************************************/ -void mcf_settimericr(unsigned int timer, unsigned int level) +static void __init m5206_timers_init(void) { - volatile unsigned char *icrp; - unsigned int icr, imr; - - if (timer <= 2) { - switch (timer) { - case 2: icr = MCFSIM_TIMER2ICR; imr = MCFINTC_TIMER2; break; - default: icr = MCFSIM_TIMER1ICR; imr = MCFINTC_TIMER1; break; - } - - icrp = (volatile unsigned char *) (MCF_MBAR + icr); - *icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3; - mcf_clrimr(imr); - } + /* Timer1 is always used as system timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER1ICR); + +#ifdef CONFIG_HIGHPROFILE + /* Timer2 is to be used as a high speed profile timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER2ICR); +#endif } /***************************************************************************/ @@ -101,6 +97,7 @@ void m5206_cpu_reset(void) void __init config_BSP(char *commandp, int size) { mach_reset = m5206_cpu_reset; + m5206_timers_init(); } /***************************************************************************/ diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c index 08ef7e268989..363296af2ee5 100644 --- a/arch/m68knommu/platform/5206e/config.c +++ b/arch/m68knommu/platform/5206e/config.c @@ -69,21 +69,17 @@ static void __init m5206e_uarts_init(void) /***************************************************************************/ -void mcf_settimericr(unsigned int timer, unsigned int level) +static void __init m5206e_timers_init(void) { - volatile unsigned char *icrp; - unsigned int icr, imr; - - if (timer <= 2) { - switch (timer) { - case 2: icr = MCFSIM_TIMER2ICR; imr = MCFINTC_TIMER2; break; - default: icr = MCFSIM_TIMER1ICR; imr = MCFINTC_TIMER1; break; - } - - icrp = (volatile unsigned char *) (MCF_MBAR + icr); - *icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3; - mcf_clrimr(imr); - } + /* Timer1 is always used as system timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER1ICR); + +#ifdef CONFIG_HIGHPROFILE + /* Timer2 is to be used as a high speed profile timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER2ICR); +#endif } /***************************************************************************/ @@ -108,6 +104,7 @@ void __init config_BSP(char *commandp, int size) #endif /* CONFIG_NETtel */ mach_reset = m5206e_cpu_reset; + m5206e_timers_init(); } /***************************************************************************/ diff --git a/arch/m68knommu/platform/5249/config.c b/arch/m68knommu/platform/5249/config.c index 7261a3d28adc..51202b1096cc 100644 --- a/arch/m68knommu/platform/5249/config.c +++ b/arch/m68knommu/platform/5249/config.c @@ -65,24 +65,19 @@ static void __init m5249_uarts_init(void) m5249_uart_init_line(line, m5249_uart_platform[line].irq); } - /***************************************************************************/ -void mcf_settimericr(unsigned int timer, unsigned int level) +static void __init m5249_timers_init(void) { - volatile unsigned char *icrp; - unsigned int icr, imr; - - if (timer <= 2) { - switch (timer) { - case 2: icr = MCFSIM_TIMER2ICR; imr = MCFINTC_TIMER2; break; - default: icr = MCFSIM_TIMER1ICR; imr = MCFINTC_TIMER1; break; - } - - icrp = (volatile unsigned char *) (MCF_MBAR + icr); - *icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3; - mcf_clrimr(imr); - } + /* Timer1 is always used as system timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER1ICR); + +#ifdef CONFIG_HIGHPROFILE + /* Timer2 is to be used as a high speed profile timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER2ICR); +#endif } /***************************************************************************/ @@ -101,6 +96,7 @@ void m5249_cpu_reset(void) void __init config_BSP(char *commandp, int size) { mach_reset = m5249_cpu_reset; + m5249_timers_init(); } /***************************************************************************/ diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c index 94a66c12c96a..b16add9aa4e5 100644 --- a/arch/m68knommu/platform/5272/config.c +++ b/arch/m68knommu/platform/5272/config.c @@ -20,12 +20,6 @@ /***************************************************************************/ -extern unsigned int mcf_timervector; -extern unsigned int mcf_profilevector; -extern unsigned int mcf_timerlevel; - -/***************************************************************************/ - /* * Some platforms need software versions of the GPIO data registers. */ @@ -148,14 +142,15 @@ void mcf_disableall(void) /***************************************************************************/ -void mcf_settimericr(int timer, int level) +static void __init m5272_timers_init(void) { - volatile unsigned long *icrp; + /* Timer1 @ level6 is always used as system timer */ + writel((0x8 | 0x6) << ((4 - 1) * 4), MCF_MBAR + MCFSIM_ICR1); - if ((timer >= 1 ) && (timer <= 4)) { - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); - *icrp = (0x8 | level) << ((4 - timer) * 4); - } +#ifdef CONFIG_HIGHPROFILE + /* Timer2 @ level7 is to be used as a high speed profile timer */ + writel((0x8 | 0x7) << ((4 - 2) * 4), MCF_MBAR + MCFSIM_ICR1); +#endif } /***************************************************************************/ @@ -195,9 +190,8 @@ void __init config_BSP(char *commandp, int size) commandp[size-1] = 0; #endif - mcf_timervector = 69; - mcf_profilevector = 70; mach_reset = m5272_cpu_reset; + m5272_timers_init(); } /***************************************************************************/ diff --git a/arch/m68knommu/platform/5307/config.c b/arch/m68knommu/platform/5307/config.c index 3e27d2ec03f0..b711597ac8e1 100644 --- a/arch/m68knommu/platform/5307/config.c +++ b/arch/m68knommu/platform/5307/config.c @@ -21,12 +21,6 @@ /***************************************************************************/ -extern unsigned int mcf_timervector; -extern unsigned int mcf_profilevector; -extern unsigned int mcf_timerlevel; - -/***************************************************************************/ - /* * Some platforms need software versions of the GPIO data registers. */ @@ -83,21 +77,17 @@ static void __init m5307_uarts_init(void) /***************************************************************************/ -void mcf_settimericr(unsigned int timer, unsigned int level) +static void __init m5307_timers_init(void) { - volatile unsigned char *icrp; - unsigned int icr, imr; - - if (timer <= 2) { - switch (timer) { - case 2: icr = MCFSIM_TIMER2ICR; imr = MCFINTC_TIMER2; break; - default: icr = MCFSIM_TIMER1ICR; imr = MCFINTC_TIMER1; break; - } - - icrp = (volatile unsigned char *) (MCF_MBAR + icr); - *icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3; - mcf_clrimr(imr); - } + /* Timer1 is always used as system timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER1ICR); + +#ifdef CONFIG_HIGHPROFILE + /* Timer2 is to be used as a high speed profile timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER2ICR); +#endif } /***************************************************************************/ @@ -120,13 +110,10 @@ void __init config_BSP(char *commandp, int size) /* Copy command line from FLASH to local buffer... */ memcpy(commandp, (char *) 0xf0004000, size); commandp[size-1] = 0; - /* Different timer setup - to prevent device clash */ - mcf_timervector = 30; - mcf_profilevector = 31; - mcf_timerlevel = 6; #endif mach_reset = m5307_cpu_reset; + m5307_timers_init(); #ifdef CONFIG_BDM_DISABLE /* diff --git a/arch/m68knommu/platform/5407/config.c b/arch/m68knommu/platform/5407/config.c index 8aa94837bbc3..cc80029a4a00 100644 --- a/arch/m68knommu/platform/5407/config.c +++ b/arch/m68knommu/platform/5407/config.c @@ -20,12 +20,6 @@ /***************************************************************************/ -extern unsigned int mcf_timervector; -extern unsigned int mcf_profilevector; -extern unsigned int mcf_timerlevel; - -/***************************************************************************/ - static struct mcf_platform_uart m5407_uart_platform[] = { { .mapbase = MCF_MBAR + MCFUART_BASE1, @@ -59,6 +53,7 @@ static void __init m5407_uart_init_line(int line, int irq) } else if (line == 1) { writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR); + mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2); mcf_clrimr(MCFINTC_UART1); } } @@ -74,21 +69,17 @@ static void __init m5407_uarts_init(void) /***************************************************************************/ -void mcf_settimericr(unsigned int timer, unsigned int level) +static void __init m5407_timers_init(void) { - volatile unsigned char *icrp; - unsigned int icr, imr; - - if (timer <= 2) { - switch (timer) { - case 2: icr = MCFSIM_TIMER2ICR; imr = MCFINTC_TIMER2; break; - default: icr = MCFSIM_TIMER1ICR; imr = MCFINTC_TIMER1; break; - } - - icrp = (volatile unsigned char *) (MCF_MBAR + icr); - *icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3; - mcf_clrimr(imr); - } + /* Timer1 is always used as system timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER1ICR); + +#ifdef CONFIG_HIGHPROFILE + /* Timer2 is to be used as a high speed profile timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER2ICR); +#endif } /***************************************************************************/ @@ -106,14 +97,8 @@ void m5407_cpu_reset(void) void __init config_BSP(char *commandp, int size) { -#if defined(CONFIG_CLEOPATRA) - /* Different timer setup - to prevent device clash */ - mcf_timervector = 30; - mcf_profilevector = 31; - mcf_timerlevel = 6; -#endif - mach_reset = m5407_cpu_reset; + m5407_timers_init(); } /***************************************************************************/ diff --git a/arch/m68knommu/platform/coldfire/timers.c b/arch/m68knommu/platform/coldfire/timers.c index 1ba8a3731653..77b0c17ce6ba 100644 --- a/arch/m68knommu/platform/coldfire/timers.c +++ b/arch/m68knommu/platform/coldfire/timers.c @@ -30,15 +30,6 @@ #define FREQ (MCF_BUSCLK / 16) #define TA(a) (MCF_MBAR + MCFTIMER_BASE1 + (a)) -/* - * Default the timer and vector to use for ColdFire. Some ColdFire - * CPU's and some boards may want different. Their sub-architecture - * startup code (in config.c) can change these if they want. - */ -unsigned int mcf_timervector = 29; -unsigned int mcf_profilevector = 31; -unsigned int mcf_timerlevel = 5; - /* * These provide the underlying interrupt vector support. * Unfortunately it is a little different on each ColdFire. @@ -107,7 +98,7 @@ static struct clocksource mcftmr_clk = { void hw_timer_init(void) { - setup_irq(mcf_timervector, &mcftmr_timer_irq); + setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq); __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR)); mcftmr_cycles_per_jiffy = FREQ / HZ; @@ -124,7 +115,7 @@ void hw_timer_init(void) mcftmr_clk.mult = clocksource_hz2mult(FREQ, mcftmr_clk.shift); clocksource_register(&mcftmr_clk); - mcf_settimericr(1, mcf_timerlevel); + mcf_clrimr(MCFINTC_TIMER1); #ifdef CONFIG_HIGHPROFILE coldfire_profile_init(); @@ -171,7 +162,7 @@ void coldfire_profile_init(void) printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n", PROFILEHZ); - setup_irq(mcf_profilevector, &coldfire_profile_irq); + setup_irq(MCF_IRQ_PROFILER, &coldfire_profile_irq); /* Set up TIMER 2 as high speed profile clock */ __raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR)); @@ -180,7 +171,7 @@ void coldfire_profile_init(void) __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 | MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR)); - mcf_settimericr(2, 7); + mcf_clrimr(MCFINTC_TIMER2); } /***************************************************************************/ -- cgit v1.2.3