From 0a5b0aa8a331f4346b4b02bc653107304a6abdc5 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <sascha@saschahauer.de>
Date: Tue, 4 Oct 2005 23:17:52 +0100
Subject: [ARM] 2950/1: i.MX gpio setup function

Patch from Sascha Hauer

Current implementation of imx_gpio_mode does not allow to
configure all alternate routing possibilities of the i.MX. With
this patch every bit in the gpio setup registers has a
corresponding bit in the gpio_mode parameter, so every routing
should be possible now.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-imx/generic.c | 23 ++++++++++++-----------
 arch/arm/mach-imx/mx1ads.c  |  2 +-
 2 files changed, 13 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index 41e5849ae8da..f8a742bb2d5b 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -28,14 +28,15 @@
 #include <linux/module.h>
 #include <asm/arch/imxfb.h>
 #include <asm/hardware.h>
+#include <asm/arch/imx-regs.h>
 
 #include <asm/mach/map.h>
 
 void imx_gpio_mode(int gpio_mode)
 {
 	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
-	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> 5;
-	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> 10;
+	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
+	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
 	unsigned int tmp;
 
 	/* Pullup enable */
@@ -57,7 +58,7 @@ void imx_gpio_mode(int gpio_mode)
 		GPR(port) &= ~(1<<pin);
 
 	/* use as gpio? */
-	if( ocr == 3 )
+	if(gpio_mode &  GPIO_GIUS)
 		GIUS(port) |= (1<<pin);
 	else
 		GIUS(port) &= ~(1<<pin);
@@ -72,20 +73,20 @@ void imx_gpio_mode(int gpio_mode)
 		tmp |= (ocr << (pin*2));
 		OCR1(port) = tmp;
 
-		if( gpio_mode &	GPIO_AOUT )
-			ICONFA1(port) &= ~( 3<<(pin*2));
-		if( gpio_mode &	GPIO_BOUT )
-			ICONFB1(port) &= ~( 3<<(pin*2));
+		ICONFA1(port) &= ~( 3<<(pin*2));
+		ICONFA1(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
+		ICONFB1(port) &= ~( 3<<(pin*2));
+		ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
 	} else {
 		tmp = OCR2(port);
 		tmp &= ~( 3<<((pin-16)*2));
 		tmp |= (ocr << ((pin-16)*2));
 		OCR2(port) = tmp;
 
-		if( gpio_mode &	GPIO_AOUT )
-			ICONFA2(port) &= ~( 3<<((pin-16)*2));
-		if( gpio_mode &	GPIO_BOUT )
-			ICONFB2(port) &= ~( 3<<((pin-16)*2));
+		ICONFA2(port) &= ~( 3<<((pin-16)*2));
+		ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2);
+		ICONFB2(port) &= ~( 3<<((pin-16)*2));
+		ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2);
 	}
 }
 
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index 5d25434d332c..a7511ddfe364 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -55,7 +55,7 @@ static void __init
 mx1ads_init(void)
 {
 #ifdef CONFIG_LEDS
-	imx_gpio_mode(GPIO_PORTA | GPIO_OUT | GPIO_GPIO | 2);
+	imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2);
 #endif
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
-- 
cgit v1.2.3