From 9372da5073705fe991f0254baf47f82d491c83ff Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 31 Mar 2011 09:07:20 +0200 Subject: mach-ux500: add HREFv60 Kconfig option This is necessary to have any use of the HREFv60 code. Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Kconfig | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index f8b9392ee347..96d546cef062 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -20,7 +20,7 @@ config UX500_SOC_DB8500 endmenu -menu "Ux500 target platform" +menu "Ux500 target platform (boards)" config MACH_U8500 bool "U8500 Development platform" @@ -29,6 +29,12 @@ config MACH_U8500 help Include support for the mop500 development platform. +config MACH_HREFV60 + bool "U85000 Development platform, HREFv60 version" + depends on UX500_SOC_DB8500 + help + Include support for the HREFv60 new development platform. + config MACH_U5500 bool "U5500 Development platform" depends on UX500_SOC_DB5500 -- cgit v1.2.3 From f727a05a2c90cfe44749004718bc5a4ef3569b34 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 27 Apr 2011 12:55:37 +0200 Subject: mach-ux500: fix HREFv60 regression This fixes a regression on the HREFv60 ux500 hardware: the wrong level shifter was addressed in the MMCI vdd handler, trying to reconfigure an unclaimed GPIO pin. Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-sdi.c | 32 ++++++++++++++++++++++++-------- 1 file changed, 24 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 7c6cb4fa47a9..f8b195063b62 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -32,13 +32,32 @@ #define MCI_DATA31DIREN (1 << 5) #define MCI_FBCLKEN (1 << 7) +/* GPIO pins used by the sdi0 level shifter */ +static int sdi0_en = -1; +static int sdi0_vsel = -1; + static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd, unsigned char power_mode) { - if (power_mode == MMC_POWER_UP) - gpio_set_value_cansleep(GPIO_SDMMC_EN, 1); - else if (power_mode == MMC_POWER_OFF) - gpio_set_value_cansleep(GPIO_SDMMC_EN, 0); + switch (power_mode) { + case MMC_POWER_UP: + case MMC_POWER_ON: + /* + * Level shifter voltage should depend on vdd to when deciding + * on either 1.8V or 2.9V. Once the decision has been made the + * level shifter must be disabled and re-enabled with a changed + * select signal in order to switch the voltage. Since there is + * no framework support yet for indicating 1.8V in vdd, use the + * default 2.9V. + */ + gpio_direction_output(sdi0_vsel, 0); + gpio_direction_output(sdi0_en, 1); + break; + case MMC_POWER_OFF: + gpio_direction_output(sdi0_vsel, 0); + gpio_direction_output(sdi0_en, 0); + break; + } return MCI_FBCLKEN | MCI_CMDDIREN | MCI_DATA0DIREN | MCI_DATA2DIREN | MCI_DATA31DIREN; @@ -77,10 +96,6 @@ static struct mmci_platform_data mop500_sdi0_data = { #endif }; -/* GPIO pins used by the sdi0 level shifter */ -static int sdi0_en = -1; -static int sdi0_vsel = -1; - static void sdi0_configure(void) { int ret; @@ -210,6 +225,7 @@ void __init mop500_sdi_init(void) sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; sdi0_configure(); } + /* * On boards with the TC35892 GPIO expander, sdi0 will finally * be added when the TC35892 initializes and calls -- cgit v1.2.3 From 02a734373b998efdcb9d28d8c3aa77e549bb38c0 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 30 Mar 2011 16:00:39 +0200 Subject: mach-ux500: correct MMC/SDI parameters We cannot clock the MMCI blocks more than 50 MHz. A bug prevented us from seeing the effect of actually driving them to 100 MHz, which indeed resulted failure, on the external SD card. Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-sdi.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index f8b195063b62..5fbd6bc63cb1 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -86,8 +86,10 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { static struct mmci_platform_data mop500_sdi0_data = { .vdd_handler = mop500_sdi0_vdd_handler, .ocr_mask = MMC_VDD_29_30, - .f_max = 100000000, - .capabilities = MMC_CAP_4_BIT_DATA, + .f_max = 50000000, + .capabilities = MMC_CAP_4_BIT_DATA | + MMC_CAP_SD_HIGHSPEED | + MMC_CAP_MMC_HIGHSPEED, .gpio_wp = -1, #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, @@ -155,7 +157,7 @@ static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = { static struct mmci_platform_data mop500_sdi2_data = { .ocr_mask = MMC_VDD_165_195, - .f_max = 100000000, + .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_cd = -1, .gpio_wp = -1, @@ -192,7 +194,7 @@ static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = { static struct mmci_platform_data mop500_sdi4_data = { .ocr_mask = MMC_VDD_29_30, - .f_max = 100000000, + .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_MMC_HIGHSPEED, .gpio_cd = -1, -- cgit v1.2.3 From 451a5edf0ed33f8ca9468ed89dc2a068d09e97be Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 1 Mar 2011 16:09:52 +0100 Subject: mach-ux500: activate USB in the U8500 defconfig Activate the new USB stuff so we atleast get some compile coverage for this stuff. Signed-off-by: Linus Walleij --- arch/arm/configs/u8500_defconfig | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index a5cce242a775..e1d602029a4d 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -67,7 +67,11 @@ CONFIG_AB8500_CORE=y CONFIG_REGULATOR=y CONFIG_REGULATOR_AB8500=y # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_MUSB_PIO_ONLY=y +CONFIG_USB_GADGET=y +CONFIG_AB8500_USB=y CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y -- cgit v1.2.3 From db24520f905430bd15eb49b5d9810ed445efe73a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 4 Apr 2011 10:44:51 +0200 Subject: mach-ux500: complete regulator constraints for MOP500 board This board now has complete regulation constraints and can turn off unused regulators. For the moment we need to wire VAUX1 (V-DISPLAY rail) always on since it somehow affects the external MMC. Cc: Liam Girdwood Cc: Mark Brown Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-regulators.c | 9 ++++++++- arch/arm/mach-ux500/board-mop500.c | 3 +++ 2 files changed, 11 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 9ed0f90cfe23..c0bc833df903 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -272,7 +272,14 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .max_uV = 2900000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, /* must be on for display */ + .boot_on = 1, /* display is on at boot */ + /* + * This voltage cannot be disabled right now because + * it is somehow affecting the external MMC + * functionality, though that typically will use + * AUX3. + */ + .always_on = 1, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), .consumer_supplies = ab8500_vaux1_consumers, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index bb26f40493e6..c64d6aa1355c 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -458,6 +458,9 @@ static void __init mop500_init_machine(void) i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, ARRAY_SIZE(mop500_i2c2_devices)); + + /* This board has full regulator constraints */ + regulator_has_full_constraints(); } MACHINE_START(U8500, "ST-Ericsson MOP500 platform") -- cgit v1.2.3 From dd367e9d06d672a549526f2d3b69a36a120b1563 Mon Sep 17 00:00:00 2001 From: Mattias Wallin Date: Thu, 9 Jun 2011 11:50:35 +0200 Subject: mach-ux500: iomap PRCMU TCDM memory The PRCMU TCDM memory needs to be iomapped for the PRCMU to work properly. Signed-off-by: Mattias Wallin Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpu-db5500.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index c01bc19e3c5e..22705d246fc7 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -44,6 +44,7 @@ static struct map_desc u5500_io_desc[] __initdata = { __IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K), __IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K), __IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K), + __IO_DEV_DESC(U5500_PRCMU_TCDM_BASE, SZ_4K), }; static struct resource db5500_pmu_resources[] = { -- cgit v1.2.3 From 58402b6e397555884d926fd22fb40ccf6fe68b46 Mon Sep 17 00:00:00 2001 From: Robert Marklund Date: Mon, 20 Jun 2011 13:30:35 +0200 Subject: mach-x500: fix SECTION warnings in uib Fix some simple section warning noise. Signed-off-by: Robert Marklund --- arch/arm/mach-ux500/board-mop500-uib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c index 69cce41f602a..5af36aa56c08 100644 --- a/arch/arm/mach-ux500/board-mop500-uib.c +++ b/arch/arm/mach-ux500/board-mop500-uib.c @@ -25,7 +25,7 @@ struct uib { void (*init)(void); }; -static struct __initdata uib mop500_uibs[] = { +static struct uib __initdata mop500_uibs[] = { [STUIB] = { .name = "ST-UIB", .option = "stuib", -- cgit v1.2.3 From 350abe0379f8106319f73cbcce37bfa2f0bfa05a Mon Sep 17 00:00:00 2001 From: Robert Marklund Date: Mon, 20 Jun 2011 15:55:46 +0200 Subject: mach-ux500: add basic support for snowball board Based on work from Mathieu J. Poirier For more information on snowball please visit http://www.igloocommunity.org Signed-off-by: Robert Marklund --- arch/arm/mach-ux500/board-mop500.c | 154 ++++++++++++++++++++++++++++++++++--- 1 file changed, 145 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index c64d6aa1355c..e3bbb5506dd1 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -26,8 +26,10 @@ #include #include #include +#include #include +#include #include #include @@ -44,6 +46,26 @@ #include "board-mop500.h" #include "board-mop500-regulators.h" +static struct gpio_led snowball_led_array[] = { + { + .name = "user_led", + .default_trigger = "none", + .gpio = 142, + }, +}; + +static struct gpio_led_platform_data snowball_led_data = { + .leds = snowball_led_array, + .num_leds = ARRAY_SIZE(snowball_led_array), +}; + +static struct platform_device snowball_led_dev = { + .name = "leds-gpio", + .dev = { + .platform_data = &snowball_led_data, + }, +}; + static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { .gpio_base = MOP500_AB8500_GPIO(0), .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, @@ -66,6 +88,97 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { 0x7A, 0x00, 0x00}, }; +static struct gpio_keys_button snowball_key_array[] = { + { + .gpio = 32, + .type = EV_KEY, + .code = KEY_1, + .desc = "userpb", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 151, + .type = EV_KEY, + .code = KEY_2, + .desc = "extkb1", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 152, + .type = EV_KEY, + .code = KEY_3, + .desc = "extkb2", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 161, + .type = EV_KEY, + .code = KEY_4, + .desc = "extkb3", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 162, + .type = EV_KEY, + .code = KEY_5, + .desc = "extkb4", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data snowball_key_data = { + .buttons = snowball_key_array, + .nbuttons = ARRAY_SIZE(snowball_key_array), +}; + +static struct platform_device snowball_key_dev = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &snowball_key_data, + } +}; + +static struct smsc911x_platform_config snowball_sbnet_cfg = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, + .shift = 1, +}; + +static struct resource sbnet_res[] = { + { + .name = "smsc911x-memory", + .start = (0x5000 << 16), + .end = (0x5000 << 16) + 0xffff, + .flags = IORESOURCE_MEM, + }, + { + .start = NOMADIK_GPIO_TO_IRQ(140), + .end = NOMADIK_GPIO_TO_IRQ(140), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +}; + +static struct platform_device snowball_sbnet_dev = { + .name = "smsc911x", + .num_resources = ARRAY_SIZE(sbnet_res), + .resource = sbnet_res, + .dev = { + .platform_data = &snowball_sbnet_cfg, + }, +}; + static struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, .regulator_reg_init = ab8500_regulator_reg_init, @@ -292,8 +405,9 @@ static void mop500_prox_deactivate(struct device *dev) } /* add any platform devices here - TODO */ -static struct platform_device *platform_devs[] __initdata = { +static struct platform_device *mop500_platform_devs[] __initdata = { &mop500_gpio_keys_device, + &ab8500_device, }; #ifdef CONFIG_STE_DMA40 @@ -424,6 +538,13 @@ static void __init mop500_uart_init(void) db8500_add_uart2(&uart2_plat); } +static struct platform_device *snowball_platform_devs[] __initdata = { + &snowball_led_dev, + &snowball_key_dev, + &snowball_sbnet_dev, + &ab8500_device, +}; + static void __init mop500_init_machine(void) { int i2c0_devs; @@ -433,24 +554,30 @@ static void __init mop500_init_machine(void) * all these GPIO pins to the internal GPIO controller * instead. */ - if (machine_is_hrefv60()) - mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - else - mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + if (!machine_is_snowball()) { + if (machine_is_hrefv60()) + mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; + else + mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + } u8500_init_devices(); mop500_pins_init(); - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); + if (machine_is_snowball()) + platform_add_devices(snowball_platform_devs, + ARRAY_SIZE(snowball_platform_devs)); + else + platform_add_devices(mop500_platform_devs, + ARRAY_SIZE(mop500_platform_devs)); mop500_i2c_init(); - mop500_sdi_init(); + if (!machine_is_snowball()) + mop500_sdi_init(); mop500_spi_init(); mop500_uart_init(); - platform_device_register(&ab8500_device); - i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); if (machine_is_hrefv60()) i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; @@ -480,3 +607,12 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") .timer = &ux500_timer, .init_machine = mop500_init_machine, MACHINE_END + +MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") + .boot_params = 0x100, + .map_io = u8500_map_io, + .init_irq = ux500_init_irq, + /* we re-use nomadik timer here */ + .timer = &ux500_timer, + .init_machine = mop500_init_machine, +MACHINE_END -- cgit v1.2.3 From d769d05498f78efdc1adff2075b3a58af40dbb76 Mon Sep 17 00:00:00 2001 From: "Mathieu J. Poirier" Date: Fri, 25 Mar 2011 09:28:56 -0600 Subject: mach-ux500: setting proper uart for snowball The UART setting in uncompress.h changes on the Snowball board. Signed-off-by: Mathieu Poirier Signed-off-by: Linus Walleij Signed-off-by: Robert Marklund --- arch/arm/mach-ux500/include/mach/uncompress.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h index 088b550c40df..7dd08074c37b 100644 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ b/arch/arm/mach-ux500/include/mach/uncompress.h @@ -54,7 +54,8 @@ static inline void arch_decomp_setup(void) if (machine_is_u8500() || machine_is_svp8500v1() || machine_is_svp8500v2() || - machine_is_hrefv60()) + machine_is_hrefv60() || + machine_is_snowball()) ux500_uart_base = U8500_UART2_BASE; else if (machine_is_u5500()) ux500_uart_base = U5500_UART0_BASE; -- cgit v1.2.3 From 885d0fe40fb97d7f394c24ac9c88721015f852b3 Mon Sep 17 00:00:00 2001 From: "Mathieu J. Poirier" Date: Fri, 25 Mar 2011 09:28:58 -0600 Subject: mach-ux500: Add SDI support for snowball board With SDI support for the Snowball we can boot from the SD card. Signed-off-by: Mathieu Poirier Signed-off-by: Linus Walleij Signed-off-by: Robert Marklund --- arch/arm/mach-ux500/board-mop500-sdi.c | 19 ++++++++++++++----- arch/arm/mach-ux500/board-mop500.c | 3 +-- arch/arm/mach-ux500/board-mop500.h | 5 +++++ 3 files changed, 20 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 5fbd6bc63cb1..d0cb9e5eb87c 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -216,15 +216,24 @@ void __init mop500_sdi_init(void) /* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */ if (!cpu_is_u8500v10()) mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; - db8500_add_sdi2(&mop500_sdi2_data, periphid); + /* sdi2 on snowball is in ATL_B mode for FSMC (LAN) */ + if (!machine_is_snowball()) + db8500_add_sdi2(&mop500_sdi2_data, periphid); /* On-board eMMC */ db8500_add_sdi4(&mop500_sdi4_data, periphid); - if (machine_is_hrefv60()) { - mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; - sdi0_en = HREFV60_SDMMC_EN_GPIO; - sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; + if (machine_is_hrefv60() || machine_is_snowball()) { + if (machine_is_hrefv60()) { + mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; + sdi0_en = HREFV60_SDMMC_EN_GPIO; + sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; + } else if (machine_is_snowball()) { + mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO; + mop500_sdi0_data.cd_invert = true; + sdi0_en = SNOWBALL_SDMMC_EN_GPIO; + sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO; + } sdi0_configure(); } diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index e3bbb5506dd1..4eead1a0786b 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -573,8 +573,7 @@ static void __init mop500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); mop500_i2c_init(); - if (!machine_is_snowball()) - mop500_sdi_init(); + mop500_sdi_init(); mop500_spi_init(); mop500_uart_init(); diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 03a31cc9b084..ee77a8970c33 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -7,6 +7,11 @@ #ifndef __BOARD_MOP500_H #define __BOARD_MOP500_H +/* snowball GPIO for MMC card */ +#define SNOWBALL_SDMMC_EN_GPIO 217 +#define SNOWBALL_SDMMC_1V8_3V_GPIO 228 +#define SNOWBALL_SDMMC_CD_GPIO 218 + /* HREFv60-specific GPIO assignments, this board has no GPIO expander */ #define HREFV60_TOUCH_RST_GPIO 143 #define HREFV60_PROX_SENSE_GPIO 217 -- cgit v1.2.3 From c41fac8aa9cb9ca31a5b3d9ce1f3b0026b83c16d Mon Sep 17 00:00:00 2001 From: Robert Marklund Date: Tue, 21 Jun 2011 09:39:13 +0200 Subject: mach-ux500: Add pin configuration for snowball board This sets up a few GPIO pins and some pinmuxing on platform boot for the Snowball board. Based on work from Mathieu J. Poirier . Signed-off-by: Robert Marklund --- arch/arm/mach-ux500/board-mop500-pins.c | 43 +++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index fd4cf1ca5efd..7013d003b8fd 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -228,6 +228,46 @@ static pin_cfg_t mop500_pins_hrefv60[] = { }; +static pin_cfg_t snowball_pins[] = { + /* SSP0, to AB8500 */ + GPIO143_SSP0_CLK, + GPIO144_SSP0_FRM, + GPIO145_SSP0_RXD | PIN_PULL_DOWN, + GPIO146_SSP0_TXD, + + /* MMC0: MicroSD card */ + GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH, + + /* MMC2: LAN */ + GPIO86_SM_ADQ0, + GPIO87_SM_ADQ1, + GPIO88_SM_ADQ2, + GPIO89_SM_ADQ3, + GPIO90_SM_ADQ4, + GPIO91_SM_ADQ5, + GPIO92_SM_ADQ6, + GPIO93_SM_ADQ7, + + GPIO94_SM_ADVn, + GPIO95_SM_CS0n, + GPIO96_SM_OEn, + GPIO97_SM_WEn, + + GPIO128_SM_CKO, + GPIO130_SM_FBCLK, + GPIO131_SM_ADQ8, + GPIO132_SM_ADQ9, + GPIO133_SM_ADQ10, + GPIO134_SM_ADQ11, + GPIO135_SM_ADQ12, + GPIO136_SM_ADQ13, + GPIO137_SM_ADQ14, + GPIO138_SM_ADQ15, + + /* RSTn_LAN */ + GPIO141_GPIO | PIN_OUTPUT_HIGH, +}; + void __init mop500_pins_init(void) { nmk_config_pins(mop500_pins_common, @@ -235,6 +275,9 @@ void __init mop500_pins_init(void) if (machine_is_hrefv60()) nmk_config_pins(mop500_pins_hrefv60, ARRAY_SIZE(mop500_pins_hrefv60)); + else if (machine_is_snowball()) + nmk_config_pins(snowball_pins, + ARRAY_SIZE(snowball_pins)); else nmk_config_pins(mop500_pins_default, ARRAY_SIZE(mop500_pins_default)); -- cgit v1.2.3 From 11ab32a734f5ee5d4f4f27f3488b0099447a2dbf Mon Sep 17 00:00:00 2001 From: "Mathieu J. Poirier" Date: Fri, 25 Mar 2011 09:29:01 -0600 Subject: mach-ux500: Kconfig for snowball board This adds the necessary Kconfig entry for a Snowball board. Signed-off-by: Mathieu Poirier Signed-off-by: Robert Marklund --- arch/arm/mach-ux500/Kconfig | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 96d546cef062..4210cb434dbc 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -35,6 +35,13 @@ config MACH_HREFV60 help Include support for the HREFv60 new development platform. +config MACH_SNOWBALL + bool "U8500 Snowball platform" + depends on UX500_SOC_DB8500 + select MACH_U8500 + help + Include support for the snowball development platform. + config MACH_U5500 bool "U5500 Development platform" depends on UX500_SOC_DB5500 -- cgit v1.2.3 From c5314877edd2ea9cccca0ca87c9a439a8d356c14 Mon Sep 17 00:00:00 2001 From: Robert Marklund Date: Tue, 21 Jun 2011 14:01:02 +0200 Subject: mach-ux500: add configs for snowball board Adds defconfig entries needed to boot a single ux500 kernel on the Snowball board. Signed-off-by: Robert Marklund --- arch/arm/configs/u8500_defconfig | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index e1d602029a4d..97d31a4663da 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -11,12 +11,12 @@ CONFIG_ARCH_U8500=y CONFIG_UX500_SOC_DB5500=y CONFIG_UX500_SOC_DB8500=y CONFIG_MACH_U8500=y +CONFIG_MACH_SNOWBALL=y CONFIG_MACH_U5500=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_NR_CPUS=2 -CONFIG_HOTPLUG_CPU=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8" @@ -25,8 +25,13 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_NETFILTER=y CONFIG_PHONET=y -CONFIG_PHONET_PIPECTRLR=y # CONFIG_WIRELESS is not set CONFIG_CAIF=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" @@ -35,6 +40,13 @@ CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_MISC_DEVICES=y CONFIG_AB8500_PWM=y CONFIG_SENSORS_BH1780=y +CONFIG_NETDEVICES=y +CONFIG_SMSC_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_SMSC911X=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -49,9 +61,9 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_AB8500_PONKEY=y # CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_NOMADIK=y CONFIG_I2C=y @@ -64,7 +76,6 @@ CONFIG_GPIO_TC3589X=y CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y CONFIG_AB8500_CORE=y -CONFIG_REGULATOR=y CONFIG_REGULATOR_AB8500=y # CONFIG_HID_SUPPORT is not set CONFIG_USB_MUSB_HDRC=y @@ -73,9 +84,11 @@ CONFIG_MUSB_PIO_ONLY=y CONFIG_USB_GADGET=y CONFIG_AB8500_USB=y CONFIG_MMC=y +CONFIG_MMC_CLKGATE=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_LM3530=y CONFIG_LEDS_LP5521=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y @@ -83,7 +96,6 @@ CONFIG_RTC_DRV_PL031=y CONFIG_DMADEVICES=y CONFIG_STE_DMA40=y CONFIG_STAGING=y -# CONFIG_STAGING_EXCLUDE_BUILD is not set CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y @@ -95,6 +107,8 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_CONFIGFS_FS=m # CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_MAGIC_SYSRQ=y @@ -103,7 +117,5 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -- cgit v1.2.3 From cde21de148a5bf474bbde59ebf046992fab3c77b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 30 May 2011 15:51:47 +0200 Subject: mach-u300: cleanup clockevent code Use the new clockevents_config_and_register() function to register the U300 clockevent, since that code requires ->cpumask to be set we set this even on this UP system to please the framework. Cc: Thomas Gleixner Signed-off-by: Linus Walleij --- arch/arm/mach-u300/timer.c | 33 ++++++++++++--------------------- 1 file changed, 12 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index 18d7fa0603c2..5f51bdeef0ef 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -27,9 +27,6 @@ #include #include -/* Be able to sleep for atleast 4 seconds (usually more) */ -#define APPTIMER_MIN_RANGE 4 - /* * APP side special timer registers * This timer contains four timers which can fire an interrupt each. @@ -309,11 +306,11 @@ static int u300_set_next_event(unsigned long cycles, /* Use general purpose timer 1 as clock event */ static struct clock_event_device clockevent_u300_1mhz = { - .name = "GPT1", - .rating = 300, /* Reasonably fast and accurate clock event */ - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = u300_set_next_event, - .set_mode = u300_set_mode, + .name = "GPT1", + .rating = 300, /* Reasonably fast and accurate clock event */ + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = u300_set_next_event, + .set_mode = u300_set_mode, }; /* Clock event timer interrupt handler */ @@ -328,9 +325,9 @@ static irqreturn_t u300_timer_interrupt(int irq, void *dev_id) } static struct irqaction u300_timer_irq = { - .name = "U300 Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = u300_timer_interrupt, + .name = "U300 Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = u300_timer_interrupt, }; /* @@ -413,16 +410,10 @@ static void __init u300_timer_init(void) "GPT2", rate, 300, 32, clocksource_mmio_readl_up)) pr_err("timer: failed to initialize U300 clock source\n"); - clockevents_calc_mult_shift(&clockevent_u300_1mhz, - rate, APPTIMER_MIN_RANGE); - /* 32bit counter, so 32bits delta is max */ - clockevent_u300_1mhz.max_delta_ns = - clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz); - /* This timer is slow enough to set for 1 cycle == 1 MHz */ - clockevent_u300_1mhz.min_delta_ns = - clockevent_delta2ns(1, &clockevent_u300_1mhz); - clockevent_u300_1mhz.cpumask = cpumask_of(0); - clockevents_register_device(&clockevent_u300_1mhz); + /* Configure and register the clockevent */ + clockevents_config_and_register(&clockevent_u300_1mhz, rate, + 1, 0xffffffff); + /* * TODO: init and register the rest of the timers too, they can be * used by hrtimers! -- cgit v1.2.3 From 32d55ff91635c22dc853c532ec85dc16663d251f Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 16 Jun 2011 09:28:28 +0200 Subject: mach-u300: set apropriate FIFO trigger levels The U300 just defined the fill level limits for the FIFOs to 1 item out of habit. It can easily handle four. Signed-off-by: Linus Walleij --- arch/arm/mach-u300/spi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c index 5767208f1c1d..7b597e2b19e2 100644 --- a/arch/arm/mach-u300/spi.c +++ b/arch/arm/mach-u300/spi.c @@ -40,8 +40,8 @@ struct pl022_config_chip dummy_chip_info = { .hierarchy = SSP_MASTER, /* 0 = drive TX even as slave, 1 = do not drive TX as slave */ .slave_tx_disable = 0, - .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, - .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, + .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM, + .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC, .ctrl_len = SSP_BITS_12, .wait_state = SSP_MWIRE_WAIT_ZERO, .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, -- cgit v1.2.3 From ef7a474cef00594ccef432ce0840464e51ea4ac0 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 1 Jun 2011 14:44:16 +0200 Subject: mach-ux500: register a clock for the SMP TWD The SMP TWD on the ux500 will change frequency at the same time as the CPU. Loop back the frequency presented from the CPU into a clock that is looked up by the SMP TWD driver with the new cpufreq notifier hook. Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/clock.c | 48 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index 32ce90840ee1..b4e786a0fa4f 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -759,6 +760,51 @@ err_out: late_initcall(clk_debugfs_init); #endif /* defined(CONFIG_DEBUG_FS) */ +unsigned long clk_smp_twd_rate = 400000000; + +unsigned long clk_smp_twd_get_rate(struct clk *clk) +{ + return clk_smp_twd_rate; +} + +static struct clk clk_smp_twd = { + .get_rate = clk_smp_twd_get_rate, + .name = "smp_twd", +}; + +static struct clk_lookup clk_smp_twd_lookup = { + .dev_id = "smp_twd", + .clk = &clk_smp_twd, +}; + +#ifdef CONFIG_CPU_FREQ + +static int clk_twd_cpufreq_transition(struct notifier_block *nb, + unsigned long state, void *data) +{ + struct cpufreq_freqs *f = data; + + if (state == CPUFREQ_PRECHANGE) { + /* Save frequency in simple Hz */ + clk_smp_twd_rate = f->new * 1000; + } + + return NOTIFY_OK; +} + +static struct notifier_block clk_twd_cpufreq_nb = { + .notifier_call = clk_twd_cpufreq_transition, +}; + +static int clk_init_smp_twd_cpufreq(void) +{ + return cpufreq_register_notifier(&clk_twd_cpufreq_nb, + CPUFREQ_TRANSITION_NOTIFIER); +} +late_initcall(clk_init_smp_twd_cpufreq); + +#endif + int __init clk_init(void) { if (cpu_is_u8500ed()) { @@ -779,6 +825,8 @@ int __init clk_init(void) else clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks)); + clkdev_add(&clk_smp_twd_lookup); + #ifdef CONFIG_DEBUG_FS clk_debugfs_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks)); if (cpu_is_u8500ed()) -- cgit v1.2.3 From fc5070b527b8243e9f4369e4e79ab431a5a1cb79 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 27 Jun 2011 18:19:30 +0200 Subject: mach-ux500: fix USB build error The mach-ux500/usb.c was referencing DMA macros, but not including so it didn't compile. Fixed by a proper #include. Cc: Arnd Bergmann Cc: Mian Yousaf Kaukab Signed-off-by: Linus Walleij Signed-off-by: Arnd Bergmann --- arch/arm/mach-ux500/usb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 82e535953fd9..0a01cbdfe063 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -6,6 +6,7 @@ */ #include #include +#include #include #include #include -- cgit v1.2.3 From 8d54297b90831b6e87e62ad910f833b8666094c8 Mon Sep 17 00:00:00 2001 From: Christian Riesch Date: Tue, 28 Jun 2011 15:10:51 +0000 Subject: davinci: da850: add a .set_rate method to ref_clk This patch allows setting the input clock frequency of the SoC from the board specific code using the davinci_set_refclk_rate function. Suggested-by: Kevin Hilman Signed-off-by: Christian Riesch Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/da850.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 133aac405853..4e22b8da3493 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -58,6 +58,7 @@ static struct pll_data pll0_data = { static struct clk ref_clk = { .name = "ref_clk", .rate = DA850_REF_FREQ, + .set_rate = davinci_simple_set_rate, }; static struct clk pll0_clk = { -- cgit v1.2.3 From d17572741bacb851f0a689c7751ce909835ad96c Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 25 May 2011 21:55:39 +0800 Subject: ARM: mxs_defconfig: Add mx23evk and mx28evk build The patch adds following configurations to enable build of mx23evk and mx28evk in defconfig. CONFIG_MACH_MX23EVK CONFIG_MACH_MX28EVK Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/configs/mxs_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 5a6ff7c605df..db2cb7d180dc 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -22,6 +22,8 @@ CONFIG_BLK_DEV_INTEGRITY=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_MXS=y +CONFIG_MACH_MX23EVK=y +CONFIG_MACH_MX28EVK=y CONFIG_MACH_STMP378X_DEVB=y CONFIG_MACH_TX28=y # CONFIG_ARM_THUMB is not set -- cgit v1.2.3 From 5dc3394c192cb8845a4594a4d029231392634d8a Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 28 May 2011 11:51:32 -0300 Subject: ARM: mx5/mx53_loco: Add support for LED MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Fabio Estevam Acked-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 1 + arch/arm/mach-mx5/board-mx53_loco.c | 17 ++++++++++++++++- 2 files changed, 17 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index f25e9d7bf0f5..79765122b6ff 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -203,6 +203,7 @@ config MACH_MX53_LOCO select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_GPIO_KEYS + select LEDS_GPIO_REGISTER help Include support for MX53 LOCO platform. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 359c3e248add..57576f709f20 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -38,6 +38,7 @@ #define MX53_LOCO_UI1 IMX_GPIO_NR(2, 14) #define MX53_LOCO_UI2 IMX_GPIO_NR(2, 15) #define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6) +#define LOCO_LED IMX_GPIO_NR(7, 7) static iomux_v3_cfg_t mx53_loco_pads[] = { /* FEC */ @@ -163,7 +164,7 @@ static iomux_v3_cfg_t mx53_loco_pads[] = { MX53_PAD_GPIO_7__SPDIF_PLOCK, MX53_PAD_GPIO_17__SPDIF_OUT1, /* GPIO */ - MX53_PAD_PATA_DA_1__GPIO7_7, + MX53_PAD_PATA_DA_1__GPIO7_7, /* LED */ MX53_PAD_PATA_DA_2__GPIO7_8, MX53_PAD_PATA_DATA5__GPIO2_5, MX53_PAD_PATA_DATA6__GPIO2_6, @@ -225,6 +226,19 @@ static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = { .bitrate = 100000, }; +static const struct gpio_led mx53loco_leds[] __initconst = { + { + .name = "green", + .default_trigger = "heartbeat", + .gpio = LOCO_LED, + }, +}; + +static const struct gpio_led_platform_data mx53loco_leds_data __initconst = { + .leds = mx53loco_leds, + .num_leds = ARRAY_SIZE(mx53loco_leds), +}; + static void __init mx53_loco_board_init(void) { imx53_soc_init(); @@ -240,6 +254,7 @@ static void __init mx53_loco_board_init(void) imx53_add_sdhci_esdhc_imx(0, NULL); imx53_add_sdhci_esdhc_imx(2, NULL); imx_add_gpio_keys(&loco_button_data); + gpio_led_register_device(-1, &mx53loco_leds_data); } static void __init mx53_loco_timer_init(void) -- cgit v1.2.3 From 95b7445946ca68222ad84cad3703a1efe1110869 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 30 May 2011 12:42:26 -0300 Subject: ARM: mx5/mx53_evk: Add support for LED Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 1 + arch/arm/mach-mx5/board-mx53_evk.c | 17 +++++++++++++++++ 2 files changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 79765122b6ff..3c9845552ca7 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -180,6 +180,7 @@ config MACH_MX53_EVK select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX + select LEDS_GPIO_REGISTER help Include support for MX53 EVK platform. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index 0d9218a6e2d2..1b417b06b736 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -35,6 +35,7 @@ #define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6) #define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30) #define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19) +#define MX53EVK_LED IMX_GPIO_NR(7, 7) #include "crm_regs.h" #include "devices-imx53.h" @@ -58,12 +59,27 @@ static iomux_v3_cfg_t mx53_evk_pads[] = { /* ecspi chip select lines */ MX53_PAD_EIM_EB2__GPIO2_30, MX53_PAD_EIM_D19__GPIO3_19, + /* LED */ + MX53_PAD_PATA_DA_1__GPIO7_7, }; static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; +static const struct gpio_led mx53evk_leds[] __initconst = { + { + .name = "green", + .default_trigger = "heartbeat", + .gpio = MX53EVK_LED, + }, +}; + +static const struct gpio_led_platform_data mx53evk_leds_data __initconst = { + .leds = mx53evk_leds, + .num_leds = ARRAY_SIZE(mx53evk_leds), +}; + static inline void mx53_evk_init_uart(void) { imx53_add_imx_uart(0, NULL); @@ -135,6 +151,7 @@ static void __init mx53_evk_board_init(void) ARRAY_SIZE(mx53_evk_spi_board_info)); imx53_add_ecspi(0, &mx53_evk_spi_data); imx53_add_imx2_wdt(0, NULL); + gpio_led_register_device(-1, &mx53evk_leds_data); } static void __init mx53_evk_timer_init(void) -- cgit v1.2.3 From 53b8ff9d3781fe6ff74494ecaea735b322d9ef8e Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 31 May 2011 17:07:03 +0800 Subject: ARM: mxs/mx28evk: add leds-gpio device for heartbeat It adds LED2 on mx28evk board as heartbeat trigger for diagnostic purpose. Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/Kconfig | 1 + arch/arm/mach-mxs/mach-mx28evk.c | 21 +++++++++++++++++++++ 2 files changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 162b0b0bc356..1d3985f37858 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -41,6 +41,7 @@ config MACH_MX23EVK config MACH_MX28EVK bool "Support MX28EVK Platform" select SOC_IMX28 + select LEDS_GPIO_REGISTER select MXS_HAVE_AMBA_DUART select MXS_HAVE_PLATFORM_AUART select MXS_HAVE_PLATFORM_FEC diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index 56767a5cce0e..eaaf6ff28990 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include @@ -29,6 +30,7 @@ #define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13) #define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15) +#define MX28EVK_GPIO_LED MXS_GPIO_NR(3, 5) #define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18) #define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30) #define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13) @@ -178,6 +180,23 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = { /* slot power enable */ MX28_PAD_PWM4__GPIO_3_29 | (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + + /* led */ + MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL, +}; + +/* led */ +static const struct gpio_led mx28evk_leds[] __initconst = { + { + .name = "GPIO-LED", + .default_trigger = "heartbeat", + .gpio = MX28EVK_GPIO_LED, + }, +}; + +static const struct gpio_led_platform_data mx28evk_led_data __initconst = { + .leds = mx28evk_leds, + .num_leds = ARRAY_SIZE(mx28evk_leds), }; /* fec */ @@ -385,6 +404,8 @@ static void __init mx28evk_init(void) if (ret) pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret); mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); + + gpio_led_register_device(0, &mx28evk_led_data); } static void __init mx28evk_timer_init(void) -- cgit v1.2.3 From 8b6c44f10087fedfb2e041e964b373df53c65514 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 7 Jun 2011 13:59:14 +0800 Subject: ARM: mxc: convert tzic to use generic irq chip The patch converts mxc tzic interrupt controller to use generic irq chip. Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/Kconfig | 1 + arch/arm/plat-mxc/irq-common.c | 13 +++--- arch/arm/plat-mxc/tzic.c | 97 +++++++++++------------------------------- 3 files changed, 32 insertions(+), 79 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9adc278a22ab..300226641860 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -376,6 +376,7 @@ config ARCH_MXC select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO + select GENERIC_IRQ_CHIP select HAVE_SCHED_CLOCK help Support for Freescale MXC/iMX-based family of processors diff --git a/arch/arm/plat-mxc/irq-common.c b/arch/arm/plat-mxc/irq-common.c index e1c6eff7258a..96953e2e4f11 100644 --- a/arch/arm/plat-mxc/irq-common.c +++ b/arch/arm/plat-mxc/irq-common.c @@ -42,17 +42,16 @@ EXPORT_SYMBOL(imx_irq_set_priority); int mxc_set_irq_fiq(unsigned int irq, unsigned int type) { - struct mxc_irq_chip *chip; - struct irq_chip *base; + struct irq_chip_generic *gc; + int (*set_irq_fiq)(unsigned int, unsigned int); int ret; ret = -ENOSYS; - base = irq_get_chip(irq); - if (base) { - chip = container_of(base, struct mxc_irq_chip, base); - if (chip->set_irq_fiq) - ret = chip->set_irq_fiq(irq, type); + gc = irq_get_chip_data(irq); + if (gc && gc->private) { + set_irq_fiq = gc->private; + ret = set_irq_fiq(irq, type); } return ret; diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index 710f2e7da4ce..f257fccdc394 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -68,78 +68,34 @@ static int tzic_set_irq_fiq(unsigned int irq, unsigned int type) return 0; } +#else +#define tzic_set_irq_fiq NULL #endif -/** - * tzic_mask_irq() - Disable interrupt source "d" in the TZIC - * - * @param d interrupt source - */ -static void tzic_mask_irq(struct irq_data *d) -{ - int index, off; - - index = d->irq >> 5; - off = d->irq & 0x1F; - __raw_writel(1 << off, tzic_base + TZIC_ENCLEAR0(index)); -} - -/** - * tzic_unmask_irq() - Enable interrupt source "d" in the TZIC - * - * @param d interrupt source - */ -static void tzic_unmask_irq(struct irq_data *d) -{ - int index, off; - - index = d->irq >> 5; - off = d->irq & 0x1F; - __raw_writel(1 << off, tzic_base + TZIC_ENSET0(index)); -} - -static unsigned int wakeup_intr[4]; +static unsigned int *wakeup_intr[4]; -/** - * tzic_set_wake_irq() - Set interrupt source "d" in the TZIC as a wake-up source. - * - * @param d interrupt source - * @param enable enable as wake-up if equal to non-zero - * disble as wake-up if equal to zero - * - * @return This function returns 0 on success. - */ -static int tzic_set_wake_irq(struct irq_data *d, unsigned int enable) +static __init void tzic_init_gc(unsigned int irq_start) { - unsigned int index, off; - - index = d->irq >> 5; - off = d->irq & 0x1F; - - if (index > 3) - return -EINVAL; - - if (enable) - wakeup_intr[index] |= (1 << off); - else - wakeup_intr[index] &= ~(1 << off); - - return 0; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + int idx = irq_start >> 5; + + gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base, + handle_level_irq); + gc->private = tzic_set_irq_fiq; + gc->wake_enabled = IRQ_MSK(32); + wakeup_intr[idx] = &gc->wake_active; + + ct = gc->chip_types; + ct->chip.irq_mask = irq_gc_mask_disable_reg; + ct->chip.irq_unmask = irq_gc_unmask_enable_reg; + ct->chip.irq_set_wake = irq_gc_set_wake; + ct->regs.disable = TZIC_ENCLEAR0(idx); + ct->regs.enable = TZIC_ENSET0(idx); + + irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0); } -static struct mxc_irq_chip mxc_tzic_chip = { - .base = { - .name = "MXC_TZIC", - .irq_ack = tzic_mask_irq, - .irq_mask = tzic_mask_irq, - .irq_unmask = tzic_unmask_irq, - .irq_set_wake = tzic_set_wake_irq, - }, -#ifdef CONFIG_FIQ - .set_irq_fiq = tzic_set_irq_fiq, -#endif -}; - /* * This function initializes the TZIC hardware and disables all the * interrupts. It registers the interrupt enable and disable functions @@ -168,11 +124,8 @@ void __init tzic_init_irq(void __iomem *irqbase) /* all IRQ no FIQ Warning :: No selection */ - for (i = 0; i < TZIC_NUM_IRQS; i++) { - irq_set_chip_and_handler(i, &mxc_tzic_chip.base, - handle_level_irq); - set_irq_flags(i, IRQF_VALID); - } + for (i = 0; i < TZIC_NUM_IRQS; i += 32) + tzic_init_gc(i); #ifdef CONFIG_FIQ /* Initialize FIQ */ @@ -199,7 +152,7 @@ int tzic_enable_wake(int is_idle) for (i = 0; i < 4; i++) { v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) : - wakeup_intr[i]; + *wakeup_intr[i]; __raw_writel(v, tzic_base + TZIC_WAKEUP0(i)); } -- cgit v1.2.3 From bd8978267d024521bdd6e453dcefc64d78d6afe6 Mon Sep 17 00:00:00 2001 From: Andre Silva Date: Fri, 10 Jun 2011 13:08:14 -0300 Subject: ARM: mach-mx5/mx53_ard: Add support for i.MX53 ARD board Signed-off-by: Andre Silva Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 8 ++ arch/arm/mach-mx5/Makefile | 1 + arch/arm/mach-mx5/board-mx53_ard.c | 176 ++++++++++++++++++++++++++++ arch/arm/plat-mxc/include/mach/uncompress.h | 1 + 4 files changed, 186 insertions(+) create mode 100644 arch/arm/mach-mx5/board-mx53_ard.c (limited to 'arch') diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 3c9845552ca7..695cdf017c5e 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -209,6 +209,14 @@ config MACH_MX53_LOCO Include support for MX53 LOCO platform. This includes specific configurations for the board and its peripherals. +config MACH_MX53_ARD + bool "Support MX53 ARD platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX_UART + help + Include support for MX53 ARD platform. This includes specific + configurations for the board and its peripherals. + endif # ARCH_MX53_SUPPORTED endif diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile index 0b9338cec516..df67fefdc6cb 100644 --- a/arch/arm/mach-mx5/Makefile +++ b/arch/arm/mach-mx5/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o +obj-$(CONFIG_MACH_MX53_ARD) += board-mx53_ard.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c new file mode 100644 index 000000000000..7e1859ba5f83 --- /dev/null +++ b/arch/arm/mach-mx5/board-mx53_ard.c @@ -0,0 +1,176 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include "crm_regs.h" +#include "devices-imx53.h" + +#define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31) + +static iomux_v3_cfg_t mx53_ard_pads[] = { + /* UART1 */ + MX53_PAD_PATA_DIOW__UART1_TXD_MUX, + MX53_PAD_PATA_DMACK__UART1_RXD_MUX, + /* WEIM for CS1 */ + MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */ + MX53_PAD_EIM_D16__EMI_WEIM_D_16, + MX53_PAD_EIM_D17__EMI_WEIM_D_17, + MX53_PAD_EIM_D18__EMI_WEIM_D_18, + MX53_PAD_EIM_D19__EMI_WEIM_D_19, + MX53_PAD_EIM_D20__EMI_WEIM_D_20, + MX53_PAD_EIM_D21__EMI_WEIM_D_21, + MX53_PAD_EIM_D22__EMI_WEIM_D_22, + MX53_PAD_EIM_D23__EMI_WEIM_D_23, + MX53_PAD_EIM_D24__EMI_WEIM_D_24, + MX53_PAD_EIM_D25__EMI_WEIM_D_25, + MX53_PAD_EIM_D26__EMI_WEIM_D_26, + MX53_PAD_EIM_D27__EMI_WEIM_D_27, + MX53_PAD_EIM_D28__EMI_WEIM_D_28, + MX53_PAD_EIM_D29__EMI_WEIM_D_29, + MX53_PAD_EIM_D30__EMI_WEIM_D_30, + MX53_PAD_EIM_D31__EMI_WEIM_D_31, + MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0, + MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1, + MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2, + MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3, + MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4, + MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5, + MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6, + MX53_PAD_EIM_OE__EMI_WEIM_OE, + MX53_PAD_EIM_RW__EMI_WEIM_RW, + MX53_PAD_EIM_CS1__EMI_WEIM_CS_1, +}; + +static struct resource ard_smsc911x_resources[] = { + { + .start = MX53_CS1_64MB_BASE_ADDR, + .end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = gpio_to_irq(ARD_ETHERNET_INT_B), + .end = gpio_to_irq(ARD_ETHERNET_INT_B), + .flags = IORESOURCE_IRQ, + }, +}; + +struct smsc911x_platform_config ard_smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_32BIT, +}; + +static struct platform_device ard_smsc_lan9220_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(ard_smsc911x_resources), + .resource = ard_smsc911x_resources, + .dev = { + .platform_data = &ard_smsc911x_config, + }, +}; + +static void __init mx53_ard_io_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads, + ARRAY_SIZE(mx53_ard_pads)); + + gpio_request(ARD_ETHERNET_INT_B, "eth-int-b"); + gpio_direction_input(ARD_ETHERNET_INT_B); +} + + /* Config CS1 settings for ethernet controller */ +static int weim_cs_config(void) +{ + u32 reg; + void __iomem *weim_base, *iomuxc_base; + + weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K); + if (!weim_base) + return -ENOMEM; + + iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K); + if (!iomuxc_base) + return -ENOMEM; + + /* CS1 timings for LAN9220 */ + writel(0x20001, (weim_base + 0x18)); + writel(0x0, (weim_base + 0x1C)); + writel(0x16000202, (weim_base + 0x20)); + writel(0x00000002, (weim_base + 0x24)); + writel(0x16002082, (weim_base + 0x28)); + writel(0x00000000, (weim_base + 0x2C)); + writel(0x00000000, (weim_base + 0x90)); + + /* specify 64 MB on CS1 and CS0 on GPR1 */ + reg = readl(iomuxc_base + 0x4); + reg &= ~0x3F; + reg |= 0x1B; + writel(reg, (iomuxc_base + 0x4)); + + iounmap(iomuxc_base); + iounmap(weim_base); + + return 0; +} + +static struct platform_device *devices[] __initdata = { + &ard_smsc_lan9220_device, +}; + +static void __init mx53_ard_board_init(void) +{ + imx53_soc_init(); + imx53_add_imx_uart(0, NULL); + + mx53_ard_io_init(); + weim_cs_config(); + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static void __init mx53_ard_timer_init(void) +{ + mx53_clocks_init(32768, 24000000, 22579200, 0); +} + +static struct sys_timer mx53_ard_timer = { + .init = mx53_ard_timer_init, +}; + +MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board") + .map_io = mx53_map_io, + .init_early = imx53_init_early, + .init_irq = mx53_init_irq, + .timer = &mx53_ard_timer, + .init_machine = mx53_ard_board_init, +MACHINE_END diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index d85e2d1c0324..88fd40452567 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -117,6 +117,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_MX53_EVK: case MACH_TYPE_MX53_LOCO: case MACH_TYPE_MX53_SMD: + case MACH_TYPE_MX53_ARD: uart_base = MX53_UART1_BASE_ADDR; break; default: -- cgit v1.2.3 From 1a636932f862d5d95b018c884a854c5cbc604f3b Mon Sep 17 00:00:00 2001 From: Andre Silva Date: Fri, 10 Jun 2011 13:15:19 -0300 Subject: ARM:mach-mx5/board-mx53_loco: Add CD and WP GPIOs Signed-off-by: Andre Silva Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx53_loco.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 57576f709f20..54be525e2bd7 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -39,6 +39,9 @@ #define MX53_LOCO_UI2 IMX_GPIO_NR(2, 15) #define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6) #define LOCO_LED IMX_GPIO_NR(7, 7) +#define LOCO_SD3_CD IMX_GPIO_NR(3, 11) +#define LOCO_SD3_WP IMX_GPIO_NR(3, 12) +#define LOCO_SD1_CD IMX_GPIO_NR(3, 13) static iomux_v3_cfg_t mx53_loco_pads[] = { /* FEC */ @@ -71,6 +74,8 @@ static iomux_v3_cfg_t mx53_loco_pads[] = { MX53_PAD_SD1_DATA1__ESDHC1_DAT1, MX53_PAD_SD1_DATA2__ESDHC1_DAT2, MX53_PAD_SD1_DATA3__ESDHC1_DAT3, + /* SD1_CD */ + MX53_PAD_EIM_DA13__GPIO3_13, /* SD3 */ MX53_PAD_PATA_DATA8__ESDHC3_DAT0, MX53_PAD_PATA_DATA9__ESDHC3_DAT1, @@ -203,6 +208,15 @@ static const struct gpio_keys_platform_data loco_button_data __initconst = { .nbuttons = ARRAY_SIZE(loco_buttons), }; +static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = { + .cd_gpio = LOCO_SD1_CD, +}; + +static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = { + .cd_gpio = LOCO_SD3_CD, + .wp_gpio = LOCO_SD3_WP, +}; + static inline void mx53_loco_fec_reset(void) { int ret; @@ -251,8 +265,8 @@ static void __init mx53_loco_board_init(void) imx53_add_imx2_wdt(0, NULL); imx53_add_imx_i2c(0, &mx53_loco_i2c_data); imx53_add_imx_i2c(1, &mx53_loco_i2c_data); - imx53_add_sdhci_esdhc_imx(0, NULL); - imx53_add_sdhci_esdhc_imx(2, NULL); + imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data); + imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data); imx_add_gpio_keys(&loco_button_data); gpio_led_register_device(-1, &mx53loco_leds_data); } -- cgit v1.2.3 From 6ecdc11bf8e1105ae393bf74026427180a6c5207 Mon Sep 17 00:00:00 2001 From: Andre Silva Date: Fri, 10 Jun 2011 13:15:20 -0300 Subject: ARM:mach-mx5/board-mx51_babbage: Add CD and WP GPIOs Signed-off-by: Andre Silva Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx51_babbage.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index e54e4bf61cfd..15c600026aee 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -41,6 +41,10 @@ #define BABBAGE_POWER_KEY IMX_GPIO_NR(2, 21) #define BABBAGE_ECSPI1_CS0 IMX_GPIO_NR(4, 24) #define BABBAGE_ECSPI1_CS1 IMX_GPIO_NR(4, 25) +#define BABBAGE_SD1_CD IMX_GPIO_NR(1, 0) +#define BABBAGE_SD1_WP IMX_GPIO_NR(1, 1) +#define BABBAGE_SD2_CD IMX_GPIO_NR(1, 6) +#define BABBAGE_SD2_WP IMX_GPIO_NR(1, 5) /* USB_CTRL_1 */ #define MX51_USB_CTRL_1_OFFSET 0x10 @@ -142,6 +146,8 @@ static iomux_v3_cfg_t mx51babbage_pads[] = { MX51_PAD_SD1_DATA1__SD1_DATA1, MX51_PAD_SD1_DATA2__SD1_DATA2, MX51_PAD_SD1_DATA3__SD1_DATA3, + MX51_PAD_GPIO1_0__GPIO1_0, + MX51_PAD_GPIO1_1__GPIO1_1, /* SD 2 */ MX51_PAD_SD2_CMD__SD2_CMD, @@ -150,6 +156,8 @@ static iomux_v3_cfg_t mx51babbage_pads[] = { MX51_PAD_SD2_DATA1__SD2_DATA1, MX51_PAD_SD2_DATA2__SD2_DATA2, MX51_PAD_SD2_DATA3__SD2_DATA3, + MX51_PAD_GPIO1_6__GPIO1_6, + MX51_PAD_GPIO1_5__GPIO1_5, /* eCSPI1 */ MX51_PAD_CSPI1_MISO__ECSPI1_MISO, @@ -331,6 +339,16 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = { .num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs), }; +static const struct esdhc_platform_data mx51_babbage_sd1_data __initconst = { + .cd_gpio = BABBAGE_SD1_CD, + .wp_gpio = BABBAGE_SD1_WP, +}; + +static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = { + .cd_gpio = BABBAGE_SD2_CD, + .wp_gpio = BABBAGE_SD2_WP, +}; + /* * Board specific initialization. */ @@ -376,8 +394,8 @@ static void __init mx51_babbage_init(void) mxc_iomux_v3_setup_pad(usbh1stp); babbage_usbhub_reset(); - imx51_add_sdhci_esdhc_imx(0, NULL); - imx51_add_sdhci_esdhc_imx(1, NULL); + imx51_add_sdhci_esdhc_imx(0, &mx51_babbage_sd1_data); + imx51_add_sdhci_esdhc_imx(1, &mx51_babbage_sd2_data); spi_register_board_info(mx51_babbage_spi_board_info, ARRAY_SIZE(mx51_babbage_spi_board_info)); -- cgit v1.2.3 From e3a58be3be7f0d7cf3c0966f3f3369acfab421e8 Mon Sep 17 00:00:00 2001 From: Andre Silva Date: Mon, 13 Jun 2011 14:31:57 -0300 Subject: ARM:mach-mx5/mx53_ard: Add ESDHC support Signed-off-by: Andre Silva Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 1 + arch/arm/mach-mx5/board-mx53_ard.c | 22 ++++++++++++++++++++++ 2 files changed, 23 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 695cdf017c5e..9a8e6f8c2014 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -213,6 +213,7 @@ config MACH_MX53_ARD bool "Support MX53 ARD platforms" select SOC_IMX53 select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX help Include support for MX53 ARD platform. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c index 7e1859ba5f83..5d98dbfdfab5 100644 --- a/arch/arm/mach-mx5/board-mx53_ard.c +++ b/arch/arm/mach-mx5/board-mx53_ard.c @@ -36,6 +36,8 @@ #include "devices-imx53.h" #define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31) +#define ARD_SD1_CD IMX_GPIO_NR(1, 1) +#define ARD_SD1_WP IMX_GPIO_NR(1, 9) static iomux_v3_cfg_t mx53_ard_pads[] = { /* UART1 */ @@ -69,6 +71,19 @@ static iomux_v3_cfg_t mx53_ard_pads[] = { MX53_PAD_EIM_OE__EMI_WEIM_OE, MX53_PAD_EIM_RW__EMI_WEIM_RW, MX53_PAD_EIM_CS1__EMI_WEIM_CS_1, + /* SDHC1 */ + MX53_PAD_SD1_CMD__ESDHC1_CMD, + MX53_PAD_SD1_CLK__ESDHC1_CLK, + MX53_PAD_SD1_DATA0__ESDHC1_DAT0, + MX53_PAD_SD1_DATA1__ESDHC1_DAT1, + MX53_PAD_SD1_DATA2__ESDHC1_DAT2, + MX53_PAD_SD1_DATA3__ESDHC1_DAT3, + MX53_PAD_PATA_DATA8__ESDHC1_DAT4, + MX53_PAD_PATA_DATA9__ESDHC1_DAT5, + MX53_PAD_PATA_DATA10__ESDHC1_DAT6, + MX53_PAD_PATA_DATA11__ESDHC1_DAT7, + MX53_PAD_GPIO_1__GPIO1_1, + MX53_PAD_GPIO_9__GPIO1_9, }; static struct resource ard_smsc911x_resources[] = { @@ -100,6 +115,11 @@ static struct platform_device ard_smsc_lan9220_device = { }, }; +static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = { + .cd_gpio = ARD_SD1_CD, + .wp_gpio = ARD_SD1_WP, +}; + static void __init mx53_ard_io_init(void) { mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads, @@ -156,6 +176,8 @@ static void __init mx53_ard_board_init(void) mx53_ard_io_init(); weim_cs_config(); platform_add_devices(devices, ARRAY_SIZE(devices)); + + imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data); } static void __init mx53_ard_timer_init(void) -- cgit v1.2.3 From 40d32c89c897e573f28653920b223b07efbcfac8 Mon Sep 17 00:00:00 2001 From: Andre Silva Date: Mon, 13 Jun 2011 14:31:58 -0300 Subject: ARM:mach-mx5/mx53_ard: Add Watchdog timer support Signed-off-by: Andre Silva Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 1 + arch/arm/mach-mx5/board-mx53_ard.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 9a8e6f8c2014..5b16f398a320 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -212,6 +212,7 @@ config MACH_MX53_LOCO config MACH_MX53_ARD bool "Support MX53 ARD platforms" select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX help diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c index 5d98dbfdfab5..7dd54b9f8682 100644 --- a/arch/arm/mach-mx5/board-mx53_ard.c +++ b/arch/arm/mach-mx5/board-mx53_ard.c @@ -178,6 +178,7 @@ static void __init mx53_ard_board_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data); + imx53_add_imx2_wdt(0, NULL); } static void __init mx53_ard_timer_init(void) -- cgit v1.2.3 From be070a40780ff61be7349b2aeeae35663e01b44b Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 15 Jun 2011 09:59:35 -0300 Subject: ARM: mx53: Add SDMA clock Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/clock-mx51-mx53.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index cea2bba06d0b..005b4aebc24e 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -1476,6 +1476,7 @@ static struct clk_lookup mx53_lookups[] = { _REGISTER_CLOCK("imx53-cspi.0", NULL, cspi_clk) _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk) _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk) + _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) }; static void clk_tree_init(void) -- cgit v1.2.3 From 931de39219bd31944dda69a015ccef103cd1d193 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 12 Jun 2011 21:33:00 -0300 Subject: ARM: mx53: Add SDMA support for MX53 Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/devices/platform-imx-dma.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c index c64f015e031b..27104f581700 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-dma.c +++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c @@ -51,6 +51,11 @@ struct imx_imx_sdma_data imx51_imx_sdma_data __initconst = imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 1); #endif /* ifdef CONFIG_SOC_IMX51 */ +#ifdef CONFIG_SOC_IMX53 +struct imx_imx_sdma_data imx53_imx_sdma_data __initconst = + imx_imx_sdma_data_entry_single(MX53, 2, "imx53", 0); +#endif /* ifdef CONFIG_SOC_IMX53 */ + static struct platform_device __init __maybe_unused *imx_add_imx_sdma( const struct imx_imx_sdma_data *data) { @@ -153,6 +158,22 @@ static struct sdma_script_start_addrs addr_imx51 = { }; #endif +#ifdef CONFIG_SOC_IMX53 +static struct sdma_script_start_addrs addr_imx53 = { + .ap_2_ap_addr = 642, + .app_2_mcu_addr = 683, + .mcu_2_app_addr = 747, + .uart_2_mcu_addr = 817, + .shp_2_mcu_addr = 891, + .mcu_2_shp_addr = 960, + .uartsh_2_mcu_addr = 1032, + .spdif_2_mcu_addr = 1100, + .mcu_2_spdif_addr = 1134, + .firi_2_mcu_addr = 1193, + .mcu_2_firi_addr = 1290, +}; +#endif + static int __init imxXX_add_imx_dma(void) { struct platform_device *ret; @@ -202,6 +223,13 @@ static int __init imxXX_add_imx_dma(void) ret = imx_add_imx_sdma(&imx51_imx_sdma_data); } else #endif + +#if defined(CONFIG_SOC_IMX53) + if (cpu_is_mx53()) { + imx53_imx_sdma_data.pdata.script_addrs = &addr_imx53; + ret = imx_add_imx_sdma(&imx53_imx_sdma_data); + } else +#endif ret = ERR_PTR(-ENODEV); if (IS_ERR(ret)) -- cgit v1.2.3 From aedc383caad3a682589e5e1b2158efed1b7f4e06 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 21 Jun 2011 14:49:35 -0300 Subject: ARM: imx2: Fix GPIO iosize On MX1, MX21 and MX27 each GPIO port has an address space of 256 bytes. Fix the iosize for these platforms. Tested on a mx27_3ds board that can boot fine after this change. Cc: Shawn Guo Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mm-imx1.c | 12 ++++++++---- arch/arm/mach-imx/mm-imx21.c | 12 ++++++------ arch/arm/mach-imx/mm-imx27.c | 12 ++++++------ 3 files changed, 20 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index b486595701b7..f2a6566e22e7 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -50,8 +50,12 @@ void __init mx1_init_irq(void) void __init imx1_soc_init(void) { - mxc_register_gpio(0, MX1_GPIO1_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTA, 0); - mxc_register_gpio(1, MX1_GPIO2_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTB, 0); - mxc_register_gpio(2, MX1_GPIO3_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTC, 0); - mxc_register_gpio(3, MX1_GPIO4_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTD, 0); + mxc_register_gpio(0, MX1_GPIO1_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTA, 0); + mxc_register_gpio(1, MX1_GPIO2_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTB, 0); + mxc_register_gpio(2, MX1_GPIO3_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTC, 0); + mxc_register_gpio(3, MX1_GPIO4_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTD, 0); } diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index f0fb8bcce6f9..f8fb41ce68d1 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -76,10 +76,10 @@ void __init mx21_init_irq(void) void __init imx21_soc_init(void) { - mxc_register_gpio(0, MX21_GPIO1_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0); - mxc_register_gpio(1, MX21_GPIO2_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0); - mxc_register_gpio(2, MX21_GPIO3_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0); - mxc_register_gpio(3, MX21_GPIO4_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0); - mxc_register_gpio(4, MX21_GPIO5_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0); - mxc_register_gpio(5, MX21_GPIO6_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0); + mxc_register_gpio(0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio(1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio(2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio(3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio(4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio(5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); } diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index d3700cec8ec5..acc6db45439e 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -76,10 +76,10 @@ void __init mx27_init_irq(void) void __init imx27_soc_init(void) { - mxc_register_gpio(0, MX27_GPIO1_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0); - mxc_register_gpio(1, MX27_GPIO2_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0); - mxc_register_gpio(2, MX27_GPIO3_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0); - mxc_register_gpio(3, MX27_GPIO4_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0); - mxc_register_gpio(4, MX27_GPIO5_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0); - mxc_register_gpio(5, MX27_GPIO6_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0); + mxc_register_gpio(0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio(1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio(2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio(3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio(4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio(5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); } -- cgit v1.2.3 From f9e9fc2736805fe812d9d27444f57733453386fb Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Mon, 28 Mar 2011 10:14:57 -0500 Subject: ARM: mx51: Add support for low power suspend on MX51 Adds initial low power suspend functionality to MX51. Supports "mem" and "standby" modes. Tested on mx51-babbage. Signed-off-by: Dinh Nguyen Tested-by: Arnaud Patard Tested-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Makefile | 1 + arch/arm/mach-mx5/pm-imx5.c | 73 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 74 insertions(+) create mode 100644 arch/arm/mach-mx5/pm-imx5.c (limited to 'arch') diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile index df67fefdc6cb..383e7cd3fbcb 100644 --- a/arch/arm/mach-mx5/Makefile +++ b/arch/arm/mach-mx5/Makefile @@ -6,6 +6,7 @@ obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o obj-$(CONFIG_SOC_IMX50) += mm-mx50.o +obj-$(CONFIG_PM) += pm-imx5.o obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c new file mode 100644 index 000000000000..e4529af0da72 --- /dev/null +++ b/arch/arm/mach-mx5/pm-imx5.c @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include +#include +#include +#include +#include +#include +#include +#include "crm_regs.h" + +static struct clk *gpc_dvfs_clk; + +static int mx5_suspend_enter(suspend_state_t state) +{ + clk_enable(gpc_dvfs_clk); + switch (state) { + case PM_SUSPEND_MEM: + mx5_cpu_lp_set(STOP_POWER_OFF); + break; + case PM_SUSPEND_STANDBY: + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + break; + default: + return -EINVAL; + } + + if (state == PM_SUSPEND_MEM) { + local_flush_tlb_all(); + flush_cache_all(); + + /*clear the EMPGC0/1 bits */ + __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR); + __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR); + } + cpu_do_idle(); + clk_disable(gpc_dvfs_clk); + + return 0; +} + +static int mx5_pm_valid(suspend_state_t state) +{ + return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX); +} + +static const struct platform_suspend_ops mx5_suspend_ops = { + .valid = mx5_pm_valid, + .enter = mx5_suspend_enter, +}; + +static int __init mx5_pm_init(void) +{ + if (gpc_dvfs_clk == NULL) + gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); + + if (!IS_ERR(gpc_dvfs_clk)) { + if (cpu_is_mx51()) + suspend_set_ops(&mx5_suspend_ops); + } else + return -EPERM; + + return 0; +} +device_initcall(mx5_pm_init); -- cgit v1.2.3 From 1abcb4cca3a964a8dde1c1e2988fd9a9a1470178 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 22 Jun 2011 09:25:25 -0300 Subject: ARM: mach-imx/mx27_3ds: Add LCD support On mx27_3ds board there is a l4f00242t03 LCD that is controlled via CSPI1. Add support for CSPI1 and LCD. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/Kconfig | 1 + arch/arm/mach-imx/mach-mx27_3ds.c | 90 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 91 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index e8dd22fa7d61..0519dd7f034b 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -278,6 +278,7 @@ config MACH_MX27_3DS select SOC_IMX27 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index b31d4129e10e..7b7c817474de 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -47,7 +48,10 @@ #define SPI2_SS0 IMX_GPIO_NR(4, 21) #define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(3, 28)) #define PMIC_INT IMX_GPIO_NR(3, 14) +#define SPI1_SS0 IMX_GPIO_NR(4, 28) #define SD1_CD IMX_GPIO_NR(2, 26) +#define LCD_RESET IMX_GPIO_NR(1, 3) +#define LCD_ENABLE IMX_GPIO_NR(1, 31) static const int mx27pdk_pins[] __initconst = { /* UART1 */ @@ -96,6 +100,12 @@ static const int mx27pdk_pins[] __initconst = { PE2_PF_USBOTG_DIR, PE24_PF_USBOTG_CLK, PE25_PF_USBOTG_DATA7, + /* CSPI1 */ + PD31_PF_CSPI1_MOSI, + PD30_PF_CSPI1_MISO, + PD29_PF_CSPI1_SCLK, + PD25_PF_CSPI1_RDY, + SPI1_SS0 | GPIO_GPIO | GPIO_OUT, /* CSPI2 */ PD22_PF_CSPI2_SCLK, PD23_PF_CSPI2_MISO, @@ -106,6 +116,31 @@ static const int mx27pdk_pins[] __initconst = { PD18_PF_I2C_CLK, /* PMIC INT */ PMIC_INT | GPIO_GPIO | GPIO_IN, + /* LCD */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA23_PF_LD17, + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + LCD_ENABLE | GPIO_GPIO | GPIO_OUT, + LCD_RESET | GPIO_GPIO | GPIO_OUT, }; static const struct imxuart_platform_data uart_pdata __initconst = { @@ -262,6 +297,13 @@ static struct mc13xxx_platform_data mc13783_pdata = { }; /* SPI */ +static int spi1_chipselect[] = {SPI1_SS0}; + +static const struct spi_imx_master spi1_pdata __initconst = { + .chipselect = spi1_chipselect, + .num_chipselect = ARRAY_SIZE(spi1_chipselect), +}; + static int spi2_chipselect[] = {SPI2_SS0}; static const struct spi_imx_master spi2_pdata __initconst = { @@ -269,6 +311,46 @@ static const struct spi_imx_master spi2_pdata __initconst = { .num_chipselect = ARRAY_SIZE(spi2_chipselect), }; +static struct imx_fb_videomode mx27_3ds_modes[] = { + { /* 480x640 @ 60 Hz */ + .mode = { + .name = "Epson-VGA", + .refresh = 60, + .xres = 480, + .yres = 640, + .pixclock = 41701, + .left_margin = 20, + .right_margin = 41, + .upper_margin = 10, + .lower_margin = 5, + .hsync_len = 20, + .vsync_len = 10, + .sync = FB_SYNC_OE_ACT_HIGH | + FB_SYNC_CLK_INVERT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, + .bpp = 16, + .pcr = 0xFAC08B82, + }, +}; + +static const struct imx_fb_platform_data mx27_3ds_fb_data __initconst = { + .mode = mx27_3ds_modes, + .num_modes = ARRAY_SIZE(mx27_3ds_modes), + .pwmr = 0x00A903FF, + .lscr1 = 0x00120300, + .dmacr = 0x00020010, +}; + +/* LCD */ +static struct l4f00242t03_pdata mx27_3ds_lcd_pdata = { + .reset_gpio = LCD_RESET, + .data_enable_gpio = LCD_ENABLE, + .core_supply = "lcd_2v8", + .io_supply = "vdd_lcdio", +}; + static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { { .modalias = "mc13783", @@ -278,6 +360,12 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { .platform_data = &mc13783_pdata, .irq = gpio_to_irq(PMIC_INT), .mode = SPI_CS_HIGH, + }, { + .modalias = "l4f00242t03", + .max_speed_hz = 5000000, + .bus_num = 0, + .chip_select = 0, /* SS0 */ + .platform_data = &mx27_3ds_lcd_pdata, }, }; @@ -311,12 +399,14 @@ static void __init mx27pdk_init(void) imx27_add_fsl_usb2_udc(&otg_device_pdata); imx27_add_spi_imx1(&spi2_pdata); + imx27_add_spi_imx0(&spi1_pdata); spi_register_board_info(mx27_3ds_spi_devs, ARRAY_SIZE(mx27_3ds_spi_devs)); if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT)) pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n"); imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data); + imx27_add_imx_fb(&mx27_3ds_fb_data); } static void __init mx27pdk_timer_init(void) -- cgit v1.2.3 From 10f046bb1df0e40bbc56579ca5ccad5f951f4047 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 22 Jun 2011 09:25:26 -0300 Subject: ARM: mach-imx/mx27_3ds: Add touchscreen support Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mach-mx27_3ds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 7b7c817474de..84fb79315dd1 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -293,7 +293,7 @@ static struct mc13xxx_platform_data mc13783_pdata = { .num_regulators = ARRAY_SIZE(mx27_3ds_regulators), }, - .flags = MC13783_USE_REGULATOR, + .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN, }; /* SPI */ -- cgit v1.2.3 From b6a14477695e54da6621c6d3c72f019b8cddb89d Mon Sep 17 00:00:00 2001 From: Andre Silva Date: Wed, 22 Jun 2011 16:33:04 -0300 Subject: ARM:mx53: Add I2C3 support Signed-off-by: Andre Silva Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/clock-mx51-mx53.c | 3 +++ arch/arm/plat-mxc/devices/platform-imx-i2c.c | 3 ++- 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 005b4aebc24e..7173b27265dd 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -1279,6 +1279,8 @@ DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET, NULL, NULL, &ipg_perclk, NULL); DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET, NULL, NULL, &ipg_clk, NULL); +DEFINE_CLOCK(i2c3_mx53_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET, + NULL, NULL, &ipg_perclk, NULL); /* FEC */ DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET, @@ -1467,6 +1469,7 @@ static struct clk_lookup mx53_lookups[] = { _REGISTER_CLOCK(NULL, "iim_clk", iim_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) + _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_mx53_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_mx53_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_mx53_clk) diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c index 2ab74f0da9a6..afe60f7244a8 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c +++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c @@ -94,8 +94,9 @@ const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst = { imx_imx_i2c_data_entry(MX53, _id, _hwid, SZ_4K) imx53_imx_i2c_data_entry(0, 1), imx53_imx_i2c_data_entry(1, 2), + imx53_imx_i2c_data_entry(2, 3), }; -#endif /* ifdef CONFIG_SOC_IMX51 */ +#endif /* ifdef CONFIG_SOC_IMX53 */ struct platform_device *__init imx_add_imx_i2c( const struct imx_imx_i2c_data *data, -- cgit v1.2.3 From 8dd7b817a1135940406a3271346a4a8e39e2b87c Mon Sep 17 00:00:00 2001 From: Andre Silva Date: Wed, 22 Jun 2011 16:33:05 -0300 Subject: ARM:mach-mx5/mx53_ard: Add I2C2 and I2C3 support Signed-off-by: Andre Silva Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 1 + arch/arm/mach-mx5/board-mx53_ard.c | 21 ++++++++++++++++++++- 2 files changed, 21 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 5b16f398a320..6a47d4c9dd17 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -213,6 +213,7 @@ config MACH_MX53_ARD bool "Support MX53 ARD platforms" select SOC_IMX53 select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX help diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c index 7dd54b9f8682..70ae25e6830b 100644 --- a/arch/arm/mach-mx5/board-mx53_ard.c +++ b/arch/arm/mach-mx5/board-mx53_ard.c @@ -84,6 +84,12 @@ static iomux_v3_cfg_t mx53_ard_pads[] = { MX53_PAD_PATA_DATA11__ESDHC1_DAT7, MX53_PAD_GPIO_1__GPIO1_1, MX53_PAD_GPIO_9__GPIO1_9, + /* I2C2 */ + MX53_PAD_EIM_EB2__I2C2_SCL, + MX53_PAD_KEY_ROW3__I2C2_SDA, + /* I2C3 */ + MX53_PAD_GPIO_3__I2C3_SCL, + MX53_PAD_GPIO_16__I2C3_SDA, }; static struct resource ard_smsc911x_resources[] = { @@ -120,6 +126,14 @@ static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = { .wp_gpio = ARD_SD1_WP, }; +static struct imxi2c_platform_data mx53_ard_i2c2_data = { + .bitrate = 50000, +}; + +static struct imxi2c_platform_data mx53_ard_i2c3_data = { + .bitrate = 400000, +}; + static void __init mx53_ard_io_init(void) { mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads, @@ -127,9 +141,12 @@ static void __init mx53_ard_io_init(void) gpio_request(ARD_ETHERNET_INT_B, "eth-int-b"); gpio_direction_input(ARD_ETHERNET_INT_B); + + gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst"); + gpio_direction_output(ARD_I2CPORTEXP_B, 1); } - /* Config CS1 settings for ethernet controller */ +/* Config CS1 settings for ethernet controller */ static int weim_cs_config(void) { u32 reg; @@ -179,6 +196,8 @@ static void __init mx53_ard_board_init(void) imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data); imx53_add_imx2_wdt(0, NULL); + imx53_add_imx_i2c(1, &mx53_ard_i2c2_data); + imx53_add_imx_i2c(2, &mx53_ard_i2c3_data); } static void __init mx53_ard_timer_init(void) -- cgit v1.2.3 From 3622360430e90d47a0d028dd5333a13771589331 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 22 Jun 2011 22:41:30 +0800 Subject: ARM: mxc: clean up imx-dma device registration The patch follows the implementation of gpio-mxc device registration to break the concentrated imx-dma device registration into soc specific setup function. Then we can avoid the churn of "#ifdef" and the cpu_is_mx checking on such a long list, which makes no sense, considering more soc supports need to be added and we need to support single image for multiple socs in the long run. Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mm-imx21.c | 3 + arch/arm/mach-imx/mm-imx25.c | 26 +++ arch/arm/mach-imx/mm-imx27.c | 3 + arch/arm/mach-imx/mm-imx31.c | 24 +++ arch/arm/mach-imx/mm-imx35.c | 44 +++++ arch/arm/mach-mx5/mm.c | 49 +++++ arch/arm/plat-mxc/devices.c | 16 +- arch/arm/plat-mxc/devices/platform-imx-dma.c | 232 ++---------------------- arch/arm/plat-mxc/include/mach/devices-common.h | 6 + 9 files changed, 183 insertions(+), 220 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index f8fb41ce68d1..4f32a8a9aeed 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -82,4 +83,6 @@ void __init imx21_soc_init(void) mxc_register_gpio(3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); mxc_register_gpio(4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); mxc_register_gpio(5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + + imx_add_imx_dma(); } diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index 1b6d583f750a..0c545207ce00 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -24,6 +24,7 @@ #include #include +#include #include #include #include @@ -61,10 +62,35 @@ void __init mx25_init_irq(void) mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR)); } +static struct sdma_script_start_addrs imx25_sdma_script __initdata = { + .ap_2_ap_addr = 729, + .uart_2_mcu_addr = 904, + .per_2_app_addr = 1255, + .mcu_2_app_addr = 834, + .uartsh_2_mcu_addr = 1120, + .per_2_shp_addr = 1329, + .mcu_2_shp_addr = 1048, + .ata_2_mcu_addr = 1560, + .mcu_2_ata_addr = 1479, + .app_2_per_addr = 1189, + .app_2_mcu_addr = 770, + .shp_2_per_addr = 1407, + .shp_2_mcu_addr = 979, +}; + +static struct sdma_platform_data imx25_sdma_pdata __initdata = { + .sdma_version = 2, + .cpu_name = "imx25", + .to_version = 1, + .script_addrs = &imx25_sdma_script, +}; + void __init imx25_soc_init(void) { mxc_register_gpio(0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0); mxc_register_gpio(1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0); mxc_register_gpio(2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0); mxc_register_gpio(3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0); + + imx_add_imx_sdma(MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata); } diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index acc6db45439e..944e02d3ccc2 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -82,4 +83,6 @@ void __init imx27_soc_init(void) mxc_register_gpio(3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); mxc_register_gpio(4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); mxc_register_gpio(5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + + imx_add_imx_dma(); } diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c index cb16ac661776..6af8519d3d6c 100644 --- a/arch/arm/mach-imx/mm-imx31.c +++ b/arch/arm/mach-imx/mm-imx31.c @@ -24,6 +24,7 @@ #include #include +#include #include #include #include @@ -57,9 +58,32 @@ void __init mx31_init_irq(void) mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); } +static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = { + .per_2_per_addr = 1677, +}; + +static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = { + .ap_2_ap_addr = 423, + .ap_2_bp_addr = 829, + .bp_2_ap_addr = 1029, +}; + +static struct sdma_platform_data imx31_sdma_pdata __initdata = { + .sdma_version = 1, + .cpu_name = "imx31", + .script_addrs = &imx31_to2_sdma_script, +}; + void __init imx31_soc_init(void) { + int to_version = mx31_revision() >> 4; + mxc_register_gpio(0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0); mxc_register_gpio(1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); mxc_register_gpio(2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); + + imx31_sdma_pdata.to_version = to_version; + if (to_version == 1) + imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script; + imx_add_imx_sdma(MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata); } diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c index 648bfca0163e..9891adb52458 100644 --- a/arch/arm/mach-imx/mm-imx35.c +++ b/arch/arm/mach-imx/mm-imx35.c @@ -25,6 +25,7 @@ #include #include +#include #include #include #include @@ -54,9 +55,52 @@ void __init mx35_init_irq(void) mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); } +static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = { + .ap_2_ap_addr = 642, + .uart_2_mcu_addr = 817, + .mcu_2_app_addr = 747, + .uartsh_2_mcu_addr = 1183, + .per_2_shp_addr = 1033, + .mcu_2_shp_addr = 961, + .ata_2_mcu_addr = 1333, + .mcu_2_ata_addr = 1252, + .app_2_mcu_addr = 683, + .shp_2_per_addr = 1111, + .shp_2_mcu_addr = 892, +}; + +static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = { + .ap_2_ap_addr = 729, + .uart_2_mcu_addr = 904, + .per_2_app_addr = 1597, + .mcu_2_app_addr = 834, + .uartsh_2_mcu_addr = 1270, + .per_2_shp_addr = 1120, + .mcu_2_shp_addr = 1048, + .ata_2_mcu_addr = 1429, + .mcu_2_ata_addr = 1339, + .app_2_per_addr = 1531, + .app_2_mcu_addr = 770, + .shp_2_per_addr = 1198, + .shp_2_mcu_addr = 979, +}; + +static struct sdma_platform_data imx35_sdma_pdata __initdata = { + .sdma_version = 2, + .cpu_name = "imx35", + .script_addrs = &imx35_to2_sdma_script, +}; + void __init imx35_soc_init(void) { + int to_version = mx35_revision() >> 4; + mxc_register_gpio(0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); mxc_register_gpio(1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); mxc_register_gpio(2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); + + imx35_sdma_pdata.to_version = to_version; + if (to_version == 1) + imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script; + imx_add_imx_sdma(MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata); } diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index 800bb8b21081..aa848ea987e8 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -18,6 +18,7 @@ #include #include +#include #include /* @@ -100,12 +101,58 @@ void __init mx53_init_irq(void) tzic_init_irq(tzic_virt); } +static struct sdma_script_start_addrs imx51_sdma_script __initdata = { + .ap_2_ap_addr = 642, + .uart_2_mcu_addr = 817, + .mcu_2_app_addr = 747, + .mcu_2_shp_addr = 961, + .ata_2_mcu_addr = 1473, + .mcu_2_ata_addr = 1392, + .app_2_per_addr = 1033, + .app_2_mcu_addr = 683, + .shp_2_per_addr = 1251, + .shp_2_mcu_addr = 892, +}; + +static struct sdma_platform_data imx51_sdma_pdata __initdata = { + .sdma_version = 2, + .cpu_name = "imx51", + .to_version = 1, + .script_addrs = &imx51_sdma_script, +}; + +static struct sdma_script_start_addrs imx53_sdma_script __initdata = { + .ap_2_ap_addr = 642, + .app_2_mcu_addr = 683, + .mcu_2_app_addr = 747, + .uart_2_mcu_addr = 817, + .shp_2_mcu_addr = 891, + .mcu_2_shp_addr = 960, + .uartsh_2_mcu_addr = 1032, + .spdif_2_mcu_addr = 1100, + .mcu_2_spdif_addr = 1134, + .firi_2_mcu_addr = 1193, + .mcu_2_firi_addr = 1290, +}; + +static struct sdma_platform_data imx53_sdma_pdata __initdata = { + .sdma_version = 2, + .cpu_name = "imx53", + .to_version = 1, + .script_addrs = &imx53_sdma_script, +}; + void __init imx51_soc_init(void) { + int to_version = mx51_revision() >> 4; + mxc_register_gpio(0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH); mxc_register_gpio(1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH); mxc_register_gpio(2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH); mxc_register_gpio(3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH); + + imx51_sdma_pdata.to_version = to_version; + imx_add_imx_sdma(MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata); } void __init imx53_soc_init(void) @@ -117,4 +164,6 @@ void __init imx53_soc_init(void) mxc_register_gpio(4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH); mxc_register_gpio(5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH); mxc_register_gpio(6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH); + + imx_add_imx_sdma(MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata); } diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c index fb166b20f60f..0d6ed31bdbf2 100644 --- a/arch/arm/plat-mxc/devices.c +++ b/arch/arm/plat-mxc/devices.c @@ -95,8 +95,22 @@ struct device mxc_aips_bus = { .parent = &platform_bus, }; +struct device mxc_ahb_bus = { + .init_name = "mxc_ahb", + .parent = &platform_bus, +}; + static int __init mxc_device_init(void) { - return device_register(&mxc_aips_bus); + int ret; + + ret = device_register(&mxc_aips_bus); + if (IS_ERR_VALUE(ret)) + goto done; + + ret = device_register(&mxc_ahb_bus); + +done: + return ret; } core_initcall(mxc_device_init); diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c index 27104f581700..2b0fdb23beb8 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-dma.c +++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c @@ -6,235 +6,29 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include -#include -#include - -#include #include -#include - -struct imx_imx_sdma_data { - resource_size_t iobase; - resource_size_t irq; - struct sdma_platform_data pdata; -}; - -#define imx_imx_sdma_data_entry_single(soc, _sdma_version, _cpu_name, _to_version)\ - { \ - .iobase = soc ## _SDMA ## _BASE_ADDR, \ - .irq = soc ## _INT_SDMA, \ - .pdata = { \ - .sdma_version = _sdma_version, \ - .cpu_name = _cpu_name, \ - .to_version = _to_version, \ - }, \ - } - -#ifdef CONFIG_SOC_IMX25 -struct imx_imx_sdma_data imx25_imx_sdma_data __initconst = - imx_imx_sdma_data_entry_single(MX25, 2, "imx25", 1); -#endif /* ifdef CONFIG_SOC_IMX25 */ -#ifdef CONFIG_SOC_IMX31 -struct imx_imx_sdma_data imx31_imx_sdma_data __initdata = - imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 1); -#endif /* ifdef CONFIG_SOC_IMX31 */ - -#ifdef CONFIG_SOC_IMX35 -struct imx_imx_sdma_data imx35_imx_sdma_data __initdata = - imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 1); -#endif /* ifdef CONFIG_SOC_IMX35 */ - -#ifdef CONFIG_SOC_IMX51 -struct imx_imx_sdma_data imx51_imx_sdma_data __initconst = - imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 1); -#endif /* ifdef CONFIG_SOC_IMX51 */ - -#ifdef CONFIG_SOC_IMX53 -struct imx_imx_sdma_data imx53_imx_sdma_data __initconst = - imx_imx_sdma_data_entry_single(MX53, 2, "imx53", 0); -#endif /* ifdef CONFIG_SOC_IMX53 */ +struct platform_device __init __maybe_unused *imx_add_imx_dma(void) +{ + return platform_device_register_resndata(&mxc_ahb_bus, + "imx-dma", -1, NULL, 0, NULL, 0); +} -static struct platform_device __init __maybe_unused *imx_add_imx_sdma( - const struct imx_imx_sdma_data *data) +struct platform_device __init __maybe_unused *imx_add_imx_sdma( + resource_size_t iobase, int irq, struct sdma_platform_data *pdata) { struct resource res[] = { { - .start = data->iobase, - .end = data->iobase + SZ_16K - 1, + .start = iobase, + .end = iobase + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { - .start = data->irq, - .end = data->irq, + .start = irq, + .end = irq, .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device("imx-sdma", -1, - res, ARRAY_SIZE(res), - &data->pdata, sizeof(data->pdata)); -} - -static struct platform_device __init __maybe_unused *imx_add_imx_dma(void) -{ - return imx_add_platform_device("imx-dma", -1, NULL, 0, NULL, 0); -} - -#ifdef CONFIG_ARCH_MX25 -static struct sdma_script_start_addrs addr_imx25 = { - .ap_2_ap_addr = 729, - .uart_2_mcu_addr = 904, - .per_2_app_addr = 1255, - .mcu_2_app_addr = 834, - .uartsh_2_mcu_addr = 1120, - .per_2_shp_addr = 1329, - .mcu_2_shp_addr = 1048, - .ata_2_mcu_addr = 1560, - .mcu_2_ata_addr = 1479, - .app_2_per_addr = 1189, - .app_2_mcu_addr = 770, - .shp_2_per_addr = 1407, - .shp_2_mcu_addr = 979, -}; -#endif - -#ifdef CONFIG_SOC_IMX31 -static struct sdma_script_start_addrs addr_imx31_to1 = { - .per_2_per_addr = 1677, -}; - -static struct sdma_script_start_addrs addr_imx31_to2 = { - .ap_2_ap_addr = 423, - .ap_2_bp_addr = 829, - .bp_2_ap_addr = 1029, -}; -#endif - -#ifdef CONFIG_SOC_IMX35 -static struct sdma_script_start_addrs addr_imx35_to1 = { - .ap_2_ap_addr = 642, - .uart_2_mcu_addr = 817, - .mcu_2_app_addr = 747, - .uartsh_2_mcu_addr = 1183, - .per_2_shp_addr = 1033, - .mcu_2_shp_addr = 961, - .ata_2_mcu_addr = 1333, - .mcu_2_ata_addr = 1252, - .app_2_mcu_addr = 683, - .shp_2_per_addr = 1111, - .shp_2_mcu_addr = 892, -}; - -static struct sdma_script_start_addrs addr_imx35_to2 = { - .ap_2_ap_addr = 729, - .uart_2_mcu_addr = 904, - .per_2_app_addr = 1597, - .mcu_2_app_addr = 834, - .uartsh_2_mcu_addr = 1270, - .per_2_shp_addr = 1120, - .mcu_2_shp_addr = 1048, - .ata_2_mcu_addr = 1429, - .mcu_2_ata_addr = 1339, - .app_2_per_addr = 1531, - .app_2_mcu_addr = 770, - .shp_2_per_addr = 1198, - .shp_2_mcu_addr = 979, -}; -#endif - -#ifdef CONFIG_SOC_IMX51 -static struct sdma_script_start_addrs addr_imx51 = { - .ap_2_ap_addr = 642, - .uart_2_mcu_addr = 817, - .mcu_2_app_addr = 747, - .mcu_2_shp_addr = 961, - .ata_2_mcu_addr = 1473, - .mcu_2_ata_addr = 1392, - .app_2_per_addr = 1033, - .app_2_mcu_addr = 683, - .shp_2_per_addr = 1251, - .shp_2_mcu_addr = 892, -}; -#endif - -#ifdef CONFIG_SOC_IMX53 -static struct sdma_script_start_addrs addr_imx53 = { - .ap_2_ap_addr = 642, - .app_2_mcu_addr = 683, - .mcu_2_app_addr = 747, - .uart_2_mcu_addr = 817, - .shp_2_mcu_addr = 891, - .mcu_2_shp_addr = 960, - .uartsh_2_mcu_addr = 1032, - .spdif_2_mcu_addr = 1100, - .mcu_2_spdif_addr = 1134, - .firi_2_mcu_addr = 1193, - .mcu_2_firi_addr = 1290, -}; -#endif - -static int __init imxXX_add_imx_dma(void) -{ - struct platform_device *ret; - -#if defined(CONFIG_SOC_IMX21) || defined(CONFIG_SOC_IMX27) - if (cpu_is_mx21() || cpu_is_mx27()) - ret = imx_add_imx_dma(); - else -#endif - -#if defined(CONFIG_SOC_IMX25) - if (cpu_is_mx25()) { - imx25_imx_sdma_data.pdata.script_addrs = &addr_imx25; - ret = imx_add_imx_sdma(&imx25_imx_sdma_data); - } else -#endif - -#if defined(CONFIG_SOC_IMX31) - if (cpu_is_mx31()) { - int to_version = mx31_revision() >> 4; - imx31_imx_sdma_data.pdata.to_version = to_version; - if (to_version == 1) - imx31_imx_sdma_data.pdata.script_addrs = &addr_imx31_to1; - else - imx31_imx_sdma_data.pdata.script_addrs = &addr_imx31_to2; - ret = imx_add_imx_sdma(&imx31_imx_sdma_data); - } else -#endif - -#if defined(CONFIG_SOC_IMX35) - if (cpu_is_mx35()) { - int to_version = mx35_revision() >> 4; - imx35_imx_sdma_data.pdata.to_version = to_version; - if (to_version == 1) - imx35_imx_sdma_data.pdata.script_addrs = &addr_imx35_to1; - else - imx35_imx_sdma_data.pdata.script_addrs = &addr_imx35_to2; - ret = imx_add_imx_sdma(&imx35_imx_sdma_data); - } else -#endif - -#if defined(CONFIG_SOC_IMX51) - if (cpu_is_mx51()) { - int to_version = mx51_revision() >> 4; - imx51_imx_sdma_data.pdata.to_version = to_version; - imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51; - ret = imx_add_imx_sdma(&imx51_imx_sdma_data); - } else -#endif - -#if defined(CONFIG_SOC_IMX53) - if (cpu_is_mx53()) { - imx53_imx_sdma_data.pdata.script_addrs = &addr_imx53; - ret = imx_add_imx_sdma(&imx53_imx_sdma_data); - } else -#endif - ret = ERR_PTR(-ENODEV); - - if (IS_ERR(ret)) - return PTR_ERR(ret); - - return 0; + return platform_device_register_resndata(&mxc_ahb_bus, "imx-sdma", + -1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } -arch_initcall(imxXX_add_imx_dma); diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index 03f626645374..bf93820ab61c 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -9,8 +9,10 @@ #include #include #include +#include extern struct device mxc_aips_bus; +extern struct device mxc_ahb_bus; struct platform_device *imx_add_platform_device_dmamask( const char *name, int id, @@ -293,3 +295,7 @@ struct imx_spi_imx_data { struct platform_device *__init imx_add_spi_imx( const struct imx_spi_imx_data *data, const struct spi_imx_master *pdata); + +struct platform_device *imx_add_imx_dma(void); +struct platform_device *imx_add_imx_sdma( + resource_size_t iobase, int irq, struct sdma_platform_data *pdata); -- cgit v1.2.3 From 2e534b21a51bad9d1fad125adac6ad49e64e1d7a Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 22 Jun 2011 22:41:31 +0800 Subject: dmaengine: imx-sdma: pass sdma firmware name via platform data It is not good to have cpu_name and to_version encoded into sdma firmware name as variables. For example, there are three TOs of imx51 soc, the sdma script never changes since TO1, which means all three TOs of imx51 uses TO1 version of sdma script. But we have to prepare three identical firmwares, sdma-imx51-to1.bin sdma-imx51-to2.bin and sdma-imx51-to3.bin, to have the kernel capable of running on all three TOs. The patch removes cpu_name and to_version from sdma platform data, and instead uses fw_name to pass the firmware name, so that we can pass the TO version where it's relevant and skip it where only one firmware exists. Signed-off-by: Shawn Guo Acked-by: Vinod Koul Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mm-imx25.c | 3 +-- arch/arm/mach-imx/mm-imx31.c | 9 ++++++--- arch/arm/mach-imx/mm-imx35.c | 9 ++++++--- arch/arm/mach-mx5/mm.c | 9 ++------- arch/arm/plat-mxc/include/mach/sdma.h | 6 ++---- drivers/dma/imx-sdma.c | 6 +++--- 6 files changed, 20 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index 0c545207ce00..1e0c95651c23 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -80,8 +80,7 @@ static struct sdma_script_start_addrs imx25_sdma_script __initdata = { static struct sdma_platform_data imx25_sdma_pdata __initdata = { .sdma_version = 2, - .cpu_name = "imx25", - .to_version = 1, + .fw_name = "sdma-imx25.bin", .script_addrs = &imx25_sdma_script, }; diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c index 6af8519d3d6c..a1ff96f249d1 100644 --- a/arch/arm/mach-imx/mm-imx31.c +++ b/arch/arm/mach-imx/mm-imx31.c @@ -70,7 +70,7 @@ static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = { static struct sdma_platform_data imx31_sdma_pdata __initdata = { .sdma_version = 1, - .cpu_name = "imx31", + .fw_name = "sdma-imx31-to2.bin", .script_addrs = &imx31_to2_sdma_script, }; @@ -82,8 +82,11 @@ void __init imx31_soc_init(void) mxc_register_gpio(1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); mxc_register_gpio(2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); - imx31_sdma_pdata.to_version = to_version; - if (to_version == 1) + if (to_version == 1) { + strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin", + strlen(imx31_sdma_pdata.fw_name)); imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script; + } + imx_add_imx_sdma(MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata); } diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c index 9891adb52458..da530ca48aea 100644 --- a/arch/arm/mach-imx/mm-imx35.c +++ b/arch/arm/mach-imx/mm-imx35.c @@ -87,7 +87,7 @@ static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = { static struct sdma_platform_data imx35_sdma_pdata __initdata = { .sdma_version = 2, - .cpu_name = "imx35", + .fw_name = "sdma-imx35-to2.bin", .script_addrs = &imx35_to2_sdma_script, }; @@ -99,8 +99,11 @@ void __init imx35_soc_init(void) mxc_register_gpio(1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); mxc_register_gpio(2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); - imx35_sdma_pdata.to_version = to_version; - if (to_version == 1) + if (to_version == 1) { + strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin", + strlen(imx35_sdma_pdata.fw_name)); imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script; + } + imx_add_imx_sdma(MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata); } diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index aa848ea987e8..1b7059f1ac76 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -116,8 +116,7 @@ static struct sdma_script_start_addrs imx51_sdma_script __initdata = { static struct sdma_platform_data imx51_sdma_pdata __initdata = { .sdma_version = 2, - .cpu_name = "imx51", - .to_version = 1, + .fw_name = "sdma-imx51.bin", .script_addrs = &imx51_sdma_script, }; @@ -137,21 +136,17 @@ static struct sdma_script_start_addrs imx53_sdma_script __initdata = { static struct sdma_platform_data imx53_sdma_pdata __initdata = { .sdma_version = 2, - .cpu_name = "imx53", - .to_version = 1, + .fw_name = "sdma-imx53.bin", .script_addrs = &imx53_sdma_script, }; void __init imx51_soc_init(void) { - int to_version = mx51_revision() >> 4; - mxc_register_gpio(0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH); mxc_register_gpio(1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH); mxc_register_gpio(2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH); mxc_register_gpio(3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH); - imx51_sdma_pdata.to_version = to_version; imx_add_imx_sdma(MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata); } diff --git a/arch/arm/plat-mxc/include/mach/sdma.h b/arch/arm/plat-mxc/include/mach/sdma.h index 913e0432e40e..f495c87c113f 100644 --- a/arch/arm/plat-mxc/include/mach/sdma.h +++ b/arch/arm/plat-mxc/include/mach/sdma.h @@ -49,14 +49,12 @@ struct sdma_script_start_addrs { * struct sdma_platform_data - platform specific data for SDMA engine * * @sdma_version The version of this SDMA engine - * @cpu_name used to generate the firmware name - * @to_version CPU Tape out version + * @fw_name The firmware name * @script_addrs SDMA scripts addresses in SDMA ROM */ struct sdma_platform_data { int sdma_version; - char *cpu_name; - int to_version; + char *fw_name; struct sdma_script_start_addrs *script_addrs; }; diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index b6d1455fa936..1ea47db2ff06 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1105,7 +1105,7 @@ static void sdma_add_scripts(struct sdma_engine *sdma, } static int __init sdma_get_firmware(struct sdma_engine *sdma, - const char *cpu_name, int to_version) + const char *fw_name) { const struct firmware *fw; char *fwname; @@ -1114,7 +1114,7 @@ static int __init sdma_get_firmware(struct sdma_engine *sdma, const struct sdma_script_start_addrs *addr; unsigned short *ram_code; - fwname = kasprintf(GFP_KERNEL, "sdma-%s-to%d.bin", cpu_name, to_version); + fwname = kasprintf(GFP_KERNEL, "%s", fw_name); if (!fwname) return -ENOMEM; @@ -1317,7 +1317,7 @@ static int __init sdma_probe(struct platform_device *pdev) if (pdata->script_addrs) sdma_add_scripts(sdma, pdata->script_addrs); - sdma_get_firmware(sdma, pdata->cpu_name, pdata->to_version); + sdma_get_firmware(sdma, pdata->fw_name); sdma->dma_device.dev = &pdev->dev; -- cgit v1.2.3 From fce43f99631b03a65b9309d956bfca93a8fe052f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 27 Jun 2011 17:12:08 -0300 Subject: ARM: mx53: Add support for missing UARTs MX53 has five UART ports. Add support for the missing UART4 and UART5 ports. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/clock-mx51-mx53.c | 10 ++++++++++ arch/arm/mach-mx5/crm_regs.h | 2 ++ arch/arm/plat-mxc/devices/platform-imx-uart.c | 2 ++ arch/arm/plat-mxc/include/mach/mx53.h | 4 ++-- 4 files changed, 16 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 7173b27265dd..e60e7bc60659 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -1254,12 +1254,20 @@ DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, &ipg_clk, &aips_tz1_clk); DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET, NULL, NULL, &ipg_clk, &spba_clk); +DEFINE_CLOCK(uart4_ipg_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG4_OFFSET, + NULL, NULL, &ipg_clk, &spba_clk); +DEFINE_CLOCK(uart5_ipg_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG6_OFFSET, + NULL, NULL, &ipg_clk, &spba_clk); DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &uart_root_clk, &uart1_ipg_clk); DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET, NULL, NULL, &uart_root_clk, &uart2_ipg_clk); DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET, NULL, NULL, &uart_root_clk, &uart3_ipg_clk); +DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG5_OFFSET, + NULL, NULL, &uart_root_clk, &uart4_ipg_clk); +DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG7_OFFSET, + NULL, NULL, &uart_root_clk, &uart5_ipg_clk); /* GPT */ DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET, @@ -1464,6 +1472,8 @@ static struct clk_lookup mx53_lookups[] = { _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk) + _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) _REGISTER_CLOCK("fec.0", NULL, fec_clk) _REGISTER_CLOCK(NULL, "iim_clk", iim_clk) diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h index 87c0c58f27a7..5e11ba7daee2 100644 --- a/arch/arm/mach-mx5/crm_regs.h +++ b/arch/arm/mach-mx5/crm_regs.h @@ -114,6 +114,8 @@ #define MXC_CCM_CCGR4 (MX51_CCM_BASE + 0x78) #define MXC_CCM_CCGR5 (MX51_CCM_BASE + 0x7C) #define MXC_CCM_CCGR6 (MX51_CCM_BASE + 0x80) +#define MXC_CCM_CCGR7 (MX51_CCM_BASE + 0x84) + #define MXC_CCM_CMEOR (MX51_CCM_BASE + 0x84) /* Define the bits in register CCR */ diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c index 3c854c2cc6dd..cfce8c918b73 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-uart.c +++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c @@ -123,6 +123,8 @@ const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst = { imx53_imx_uart_data_entry(0, 1), imx53_imx_uart_data_entry(1, 2), imx53_imx_uart_data_entry(2, 3), + imx53_imx_uart_data_entry(3, 4), + imx53_imx_uart_data_entry(4, 5), }; #endif /* ifdef CONFIG_SOC_IMX53 */ diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h index 74cd093203e0..d1d1bf38efae 100644 --- a/arch/arm/plat-mxc/include/mach/mx53.h +++ b/arch/arm/plat-mxc/include/mach/mx53.h @@ -241,7 +241,7 @@ #define MX53_INT_IPU_ERR 10 #define MX53_INT_IPU_SYN 11 #define MX53_INT_GPU 12 -#define MX53_INT_RESV13 13 +#define MX53_INT_UART4 13 #define MX53_INT_USB_H1 14 #define MX53_INT_EMI 15 #define MX53_INT_USB_H2 16 @@ -314,7 +314,7 @@ #define MX53_INT_CAN2 83 #define MX53_INT_GPU2_IRQ 84 #define MX53_INT_GPU2_BUSY 85 -#define MX53_INT_RESV86 86 +#define MX53_INT_UART5 86 #define MX53_INT_FEC 87 #define MX53_INT_OWIRE 88 #define MX53_INT_CTI1_TG2 89 -- cgit v1.2.3 From e1fb61e38f8ec8e586c63d67a06197aa44ba952e Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 27 Jun 2011 17:12:09 -0300 Subject: ARM: mx53: Add SSI suport Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/clock-mx51-mx53.c | 3 +++ arch/arm/mach-mx5/devices-imx53.h | 4 ++++ arch/arm/plat-mxc/devices/platform-imx-ssi.c | 10 ++++++++++ arch/arm/plat-mxc/include/mach/mx53.h | 24 ++++++++++++------------ 4 files changed, 29 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index e60e7bc60659..3a269f0c952f 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -1490,6 +1490,9 @@ static struct clk_lookup mx53_lookups[] = { _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk) _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk) _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) + _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) + _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) + _REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk) }; static void clk_tree_init(void) diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h index 48f4c8cc42f5..b8a492fe2200 100644 --- a/arch/arm/mach-mx5/devices-imx53.h +++ b/arch/arm/mach-mx5/devices-imx53.h @@ -32,3 +32,7 @@ extern const struct imx_spi_imx_data imx53_ecspi_data[]; extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[]; #define imx53_add_imx2_wdt(id, pdata) \ imx_add_imx2_wdt(&imx53_imx2_wdt_data[id]) + +extern const struct imx_imx_ssi_data imx53_imx_ssi_data[]; +#define imx53_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx53_imx_ssi_data[id], pdata) diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/plat-mxc/devices/platform-imx-ssi.c index 66b8593e9b69..21c6f30e1017 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-ssi.c +++ b/arch/arm/plat-mxc/devices/platform-imx-ssi.c @@ -76,6 +76,16 @@ const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX51 */ +#ifdef CONFIG_SOC_IMX53 +const struct imx_imx_ssi_data imx53_imx_ssi_data[] __initconst = { +#define imx53_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX53, _id, _hwid, SZ_16K) + imx53_imx_ssi_data_entry(0, 1), + imx53_imx_ssi_data_entry(1, 2), + imx53_imx_ssi_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_SOC_IMX53 */ + struct platform_device *__init imx_add_imx_ssi( const struct imx_imx_ssi_data *data, const struct imx_ssi_platform_data *pdata) diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h index d1d1bf38efae..5e3c3236ebf3 100644 --- a/arch/arm/plat-mxc/include/mach/mx53.h +++ b/arch/arm/plat-mxc/include/mach/mx53.h @@ -176,10 +176,10 @@ /* * DMA request assignments */ -#define MX53_DMA_REQ_SSI3_TX1 47 -#define MX53_DMA_REQ_SSI3_RX1 46 -#define MX53_DMA_REQ_SSI3_TX2 45 -#define MX53_DMA_REQ_SSI3_RX2 44 +#define MX53_DMA_REQ_SSI3_TX0 47 +#define MX53_DMA_REQ_SSI3_RX0 46 +#define MX53_DMA_REQ_SSI3_TX1 45 +#define MX53_DMA_REQ_SSI3_RX1 44 #define MX53_DMA_REQ_UART3_TX 43 #define MX53_DMA_REQ_UART3_RX 42 #define MX53_DMA_REQ_ESAI_TX 41 @@ -194,14 +194,14 @@ #define MX53_DMA_REQ_ASRC_DMA1 32 #define MX53_DMA_REQ_EMI_WR 31 #define MX53_DMA_REQ_EMI_RD 30 -#define MX53_DMA_REQ_SSI1_TX1 29 -#define MX53_DMA_REQ_SSI1_RX1 28 -#define MX53_DMA_REQ_SSI1_TX2 27 -#define MX53_DMA_REQ_SSI1_RX2 26 -#define MX53_DMA_REQ_SSI2_TX1 25 -#define MX53_DMA_REQ_SSI2_RX1 24 -#define MX53_DMA_REQ_SSI2_TX2 23 -#define MX53_DMA_REQ_SSI2_RX2 22 +#define MX53_DMA_REQ_SSI1_TX0 29 +#define MX53_DMA_REQ_SSI1_RX0 28 +#define MX53_DMA_REQ_SSI1_TX1 27 +#define MX53_DMA_REQ_SSI1_RX1 26 +#define MX53_DMA_REQ_SSI2_TX0 25 +#define MX53_DMA_REQ_SSI2_RX0 24 +#define MX53_DMA_REQ_SSI2_TX1 23 +#define MX53_DMA_REQ_SSI2_RX1 22 #define MX53_DMA_REQ_I2C2_SDHC2 21 #define MX53_DMA_REQ_I2C1_SDHC1 20 #define MX53_DMA_REQ_UART1_TX 19 -- cgit v1.2.3 From 22785de54bfeae4809a469483d9021730fe2f106 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 27 Jun 2011 17:12:11 -0300 Subject: ARM: mx53: Add keypad support Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/clock-mx51-mx53.c | 1 + arch/arm/mach-mx5/devices-imx53.h | 4 ++++ arch/arm/plat-mxc/devices/platform-imx-keypad.c | 5 +++++ 3 files changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 3a269f0c952f..ff16d86ff597 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -1493,6 +1493,7 @@ static struct clk_lookup mx53_lookups[] = { _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) _REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk) + _REGISTER_CLOCK("imx-keypad", NULL, dummy_clk) }; static void clk_tree_init(void) diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h index b8a492fe2200..c27fe8bb4762 100644 --- a/arch/arm/mach-mx5/devices-imx53.h +++ b/arch/arm/mach-mx5/devices-imx53.h @@ -36,3 +36,7 @@ extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[]; extern const struct imx_imx_ssi_data imx53_imx_ssi_data[]; #define imx53_add_imx_ssi(id, pdata) \ imx_add_imx_ssi(&imx53_imx_ssi_data[id], pdata) + +extern const struct imx_imx_keypad_data imx53_imx_keypad_data; +#define imx53_add_imx_keypad(pdata) \ + imx_add_imx_keypad(&imx53_imx_keypad_data, pdata) diff --git a/arch/arm/plat-mxc/devices/platform-imx-keypad.c b/arch/arm/plat-mxc/devices/platform-imx-keypad.c index 26366114b021..479c3e9f771f 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-keypad.c +++ b/arch/arm/plat-mxc/devices/platform-imx-keypad.c @@ -46,6 +46,11 @@ const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst = imx_imx_keypad_data_entry_single(MX51, SZ_16); #endif /* ifdef CONFIG_SOC_IMX51 */ +#ifdef CONFIG_SOC_IMX53 +const struct imx_imx_keypad_data imx53_imx_keypad_data __initconst = + imx_imx_keypad_data_entry_single(MX53, SZ_16); +#endif /* ifdef CONFIG_SOC_IMX53 */ + struct platform_device *__init imx_add_imx_keypad( const struct imx_imx_keypad_data *data, const struct matrix_keymap_data *pdata) -- cgit v1.2.3 From d23cb578cc7c520d17c6a995e78a7a05cb0abe72 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 25 Jun 2011 13:28:53 -0300 Subject: ARM: mach-mx5/mx53_ard: Add missing definition commit 9203d59 (ARM:mach-mx5/mx53_ard: Add I2C2 and I2C3 support) missed to include the define for ARD_I2CPORTEXP_B. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx53_ard.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c index 70ae25e6830b..280cefc1a986 100644 --- a/arch/arm/mach-mx5/board-mx53_ard.c +++ b/arch/arm/mach-mx5/board-mx53_ard.c @@ -38,6 +38,7 @@ #define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31) #define ARD_SD1_CD IMX_GPIO_NR(1, 1) #define ARD_SD1_WP IMX_GPIO_NR(1, 9) +#define ARD_I2CPORTEXP_B IMX_GPIO_NR(2, 3) static iomux_v3_cfg_t mx53_ard_pads[] = { /* UART1 */ -- cgit v1.2.3 From 2a90a69f652edb410f7936d0271bfa8566ef6a87 Mon Sep 17 00:00:00 2001 From: Daiane Angolini Date: Thu, 30 Jun 2011 14:41:46 -0300 Subject: ARM: mach-mx5/mx53_ard: Add gpio_keys support Signed-off-by: Daiane Angolini Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 1 + arch/arm/mach-mx5/board-mx53_ard.c | 35 +++++++++++++++++++++++++++++++++++ 2 files changed, 36 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 6a47d4c9dd17..b4e7c58bbb38 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -216,6 +216,7 @@ config MACH_MX53_ARD select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_GPIO_KEYS help Include support for MX53 ARD platform. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c index 280cefc1a986..76a67c4a2a0b 100644 --- a/arch/arm/mach-mx5/board-mx53_ard.c +++ b/arch/arm/mach-mx5/board-mx53_ard.c @@ -39,6 +39,11 @@ #define ARD_SD1_CD IMX_GPIO_NR(1, 1) #define ARD_SD1_WP IMX_GPIO_NR(1, 9) #define ARD_I2CPORTEXP_B IMX_GPIO_NR(2, 3) +#define ARD_VOLUMEDOWN IMX_GPIO_NR(4, 0) +#define ARD_HOME IMX_GPIO_NR(5, 10) +#define ARD_BACK IMX_GPIO_NR(5, 11) +#define ARD_PROG IMX_GPIO_NR(5, 12) +#define ARD_VOLUMEUP IMX_GPIO_NR(5, 13) static iomux_v3_cfg_t mx53_ard_pads[] = { /* UART1 */ @@ -91,6 +96,35 @@ static iomux_v3_cfg_t mx53_ard_pads[] = { /* I2C3 */ MX53_PAD_GPIO_3__I2C3_SCL, MX53_PAD_GPIO_16__I2C3_SDA, + /* GPIO */ + MX53_PAD_DISP0_DAT16__GPIO5_10, /* home */ + MX53_PAD_DISP0_DAT17__GPIO5_11, /* back */ + MX53_PAD_DISP0_DAT18__GPIO5_12, /* prog */ + MX53_PAD_DISP0_DAT19__GPIO5_13, /* vol up */ + MX53_PAD_GPIO_10__GPIO4_0, /* vol down */ +}; + +#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \ +{ \ + .gpio = gpio_num, \ + .type = EV_KEY, \ + .code = ev_code, \ + .active_low = act_low, \ + .desc = "btn " descr, \ + .wakeup = wake, \ +} + +static struct gpio_keys_button ard_buttons[] = { + GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0), + GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0), + GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0), + GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0), + GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0), +}; + +static const struct gpio_keys_platform_data ard_button_data __initconst = { + .buttons = ard_buttons, + .nbuttons = ARRAY_SIZE(ard_buttons), }; static struct resource ard_smsc911x_resources[] = { @@ -199,6 +233,7 @@ static void __init mx53_ard_board_init(void) imx53_add_imx2_wdt(0, NULL); imx53_add_imx_i2c(1, &mx53_ard_i2c2_data); imx53_add_imx_i2c(2, &mx53_ard_i2c3_data); + imx_add_gpio_keys(&ard_button_data); } static void __init mx53_ard_timer_init(void) -- cgit v1.2.3 From 97ea3da2048e9018f2513a36a95d2f14b3853d1a Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 1 Jul 2011 16:54:01 +0200 Subject: arm: mxs: add mmc-device for mach-tx28 Signed-off-by: Wolfram Sang Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/Kconfig | 1 + arch/arm/mach-mxs/mach-tx28.c | 6 ++++++ 2 files changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 1d3985f37858..4cd0231ee539 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -61,6 +61,7 @@ config MODULE_TX28 select MXS_HAVE_PLATFORM_AUART select MXS_HAVE_PLATFORM_FEC select MXS_HAVE_PLATFORM_MXS_I2C + select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXS_PWM config MACH_TX28 diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c index 6766a12cca7f..515a423f82cd 100644 --- a/arch/arm/mach-mxs/mach-tx28.c +++ b/arch/arm/mach-mxs/mach-tx28.c @@ -139,6 +139,11 @@ static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = { }, }; +static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = { + .wp_gpio = -EINVAL, + .flags = SLOTF_4_BIT_CAPABLE, +}; + static void __init tx28_stk5v3_init(void) { mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads, @@ -155,6 +160,7 @@ static void __init tx28_stk5v3_init(void) mx28_add_mxs_i2c(0); i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo, ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo)); + mx28_add_mxs_mmc(0, &tx28_mmc0_pdata); } static void __init tx28_timer_init(void) -- cgit v1.2.3 From 1459fc5f6d244b4e43690df5e9e28e8de390caf0 Mon Sep 17 00:00:00 2001 From: Jürgen Lambrecht Date: Tue, 5 Jul 2011 15:35:31 +0200 Subject: Enable RTC driver. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The MC13783 MFD also contains an RTC. Enable it. To avoid "No RTC device found, ALARM timers will not wake from suspend", this patch is needed: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=c008ba58af24dc5d0d8e9fe6e59d876910254761 Signed-off-by: Jürgen Lambrecht Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mach-mx27_3ds.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 84fb79315dd1..6fa6934ab150 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -293,7 +293,8 @@ static struct mc13xxx_platform_data mc13783_pdata = { .num_regulators = ARRAY_SIZE(mx27_3ds_regulators), }, - .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN, + .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN | + MC13783_USE_RTC, }; /* SPI */ -- cgit v1.2.3 From 00d2711d700ae77b5bb66ea7c73eaa2cf155fa97 Mon Sep 17 00:00:00 2001 From: Imre Kaloz Date: Thu, 7 Jul 2011 12:19:09 +0200 Subject: ARM: cns3xxx: Should select CPU_V6K CNS3XXX is based on MPCore, so select the right CPU option for it. Signed-off-by: Imre Kaloz Signed-off-by: Anton Vorontsov --- arch/arm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9adc278a22ab..c2e5f3dc65b1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -321,7 +321,7 @@ config ARCH_CLPS711X config ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" - select CPU_V6 + select CPU_V6K select GENERIC_CLOCKEVENTS select ARM_GIC select MIGHT_HAVE_PCI -- cgit v1.2.3 From 93e85d8e902e1a4468c6ade5c6ec3dd3055a489f Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 6 Jul 2011 16:45:09 +0400 Subject: ARM: cns3xxx: Add support for L2 Cache Controller CNS3xxx SOCs have L310-compatible cache controller, so let's use it. With this patch benchmarking with 'gzip' shows that performance is doubled, and I'm still able to boot full-fledged userland over NFS (using PCIe NIC), so the support should be pretty robust. p.s. While CNS3xxx reports that it has PL310, it still needs to wait on cache line operations, so we should not select 'CACHE_PL310', which is a micro-optimization that removes these waits for v7 CPUs. Someday we'd better rename CACHE_PL310 Kconfig option into NO_CACHE_WAIT or something less ambiguous. Signed-off-by: Anton Vorontsov --- arch/arm/mach-cns3xxx/cns3420vb.c | 2 ++ arch/arm/mach-cns3xxx/core.c | 43 +++++++++++++++++++++++++++++++++++++++ arch/arm/mach-cns3xxx/core.h | 6 ++++++ arch/arm/mm/Kconfig | 2 +- 4 files changed, 52 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index 08e5c8759502..4b804baa5f80 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -170,6 +170,8 @@ static struct platform_device *cns3420_pdevs[] __initdata = { static void __init cns3420_init(void) { + cns3xxx_l2x0_init(); + platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs)); cns3xxx_ahci_init(); diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index da30078a80c1..941a308e1253 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include "core.h" @@ -244,3 +245,45 @@ static void __init cns3xxx_timer_init(void) struct sys_timer cns3xxx_timer = { .init = cns3xxx_timer_init, }; + +#ifdef CONFIG_CACHE_L2X0 + +void __init cns3xxx_l2x0_init(void) +{ + void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K); + u32 val; + + if (WARN_ON(!base)) + return; + + /* + * Tag RAM Control register + * + * bit[10:8] - 1 cycle of write accesses latency + * bit[6:4] - 1 cycle of read accesses latency + * bit[3:0] - 1 cycle of setup latency + * + * 1 cycle of latency for setup, read and write accesses + */ + val = readl(base + L2X0_TAG_LATENCY_CTRL); + val &= 0xfffff888; + writel(val, base + L2X0_TAG_LATENCY_CTRL); + + /* + * Data RAM Control register + * + * bit[10:8] - 1 cycles of write accesses latency + * bit[6:4] - 1 cycles of read accesses latency + * bit[3:0] - 1 cycle of setup latency + * + * 1 cycle of latency for setup, read and write accesses + */ + val = readl(base + L2X0_DATA_LATENCY_CTRL); + val &= 0xfffff888; + writel(val, base + L2X0_DATA_LATENCY_CTRL); + + /* 32 KiB, 8-way, parity disable */ + l2x0_init(base, 0x00540000, 0xfe000fff); +} + +#endif /* CONFIG_CACHE_L2X0 */ diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h index ffeb3a8b73ba..fcd225343c61 100644 --- a/arch/arm/mach-cns3xxx/core.h +++ b/arch/arm/mach-cns3xxx/core.h @@ -13,6 +13,12 @@ extern struct sys_timer cns3xxx_timer; +#ifdef CONFIG_CACHE_L2X0 +void __init cns3xxx_l2x0_init(void); +#else +static inline void cns3xxx_l2x0_init(void) {} +#endif /* CONFIG_CACHE_L2X0 */ + void __init cns3xxx_map_io(void); void __init cns3xxx_init_irq(void); void cns3xxx_power_off(void); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 0074b8dba793..cb26d49a8cd6 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -821,7 +821,7 @@ config CACHE_L2X0 depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \ ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \ - ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE + ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || ARCH_CNS3XXX default y select OUTER_CACHE select OUTER_CACHE_SYNC -- cgit v1.2.3 From a51ca38b6330e463cc1a7adf64502ff735452915 Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Wed, 6 Jul 2011 06:01:21 +0000 Subject: davinci: pass clock flags to davinci_psc_config() Enabling or disabling a PSC can take certain modifiers like "disable with reset", "force enable/disable" and "enable/disable with local reset" apart from the regular clock gating functionality. Pass a flags argument to davinci_psc_config() so these variations can be supported there. At this time only "disable with reset" is supported, but other functionality will be added in subsequent patches. Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/clock.c | 8 +++----- arch/arm/mach-davinci/include/mach/psc.h | 2 +- arch/arm/mach-davinci/psc.c | 12 +++++++++++- 3 files changed, 15 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index e4e3af179f02..d0450ac2c00e 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -44,7 +44,7 @@ static void __clk_enable(struct clk *clk) __clk_enable(clk->parent); if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, - PSC_STATE_ENABLE); + true, clk->flags); } static void __clk_disable(struct clk *clk) @@ -54,8 +54,7 @@ static void __clk_disable(struct clk *clk) if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) && (clk->flags & CLK_PSC)) davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, - (clk->flags & PSC_SWRSTDISABLE) ? - PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE); + false, clk->flags); if (clk->parent) __clk_disable(clk->parent); } @@ -239,8 +238,7 @@ static int __init clk_disable_unused(void) pr_debug("Clocks: disable unused %s\n", ck->name); davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc, - (ck->flags & PSC_SWRSTDISABLE) ? - PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE); + false, ck->flags); } spin_unlock_irq(&clockfw_lock); diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index a47e6f29206e..215fcca6bbdc 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -249,7 +249,7 @@ extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id); extern void davinci_psc_config(unsigned int domain, unsigned int ctlr, - unsigned int id, u32 next_state); + unsigned int id, bool enable, u32 flags); #endif diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index a41580400701..823cb1b9e484 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -25,6 +25,8 @@ #include #include +#include "clock.h" + /* Return nonzero iff the domain's clock is active */ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) { @@ -48,11 +50,12 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) /* Enable or disable a PSC domain */ void davinci_psc_config(unsigned int domain, unsigned int ctlr, - unsigned int id, u32 next_state) + unsigned int id, bool enable, u32 flags) { u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; void __iomem *psc_base; struct davinci_soc_info *soc_info = &davinci_soc_info; + u32 next_state = PSC_STATE_ENABLE; if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { pr_warning("PSC: Bad psc data: 0x%x[%d]\n", @@ -62,6 +65,13 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K); + if (!enable) { + if (flags & PSC_SWRSTDISABLE) + next_state = PSC_STATE_SWRSTDISABLE; + else + next_state = PSC_STATE_DISABLE; + } + mdctl = __raw_readl(psc_base + MDCTL + 4 * id); mdctl &= ~MDSTAT_STATE_MASK; mdctl |= next_state; -- cgit v1.2.3 From aad70de20fc69970a3080e7e8f02b54a4a3fe3e6 Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Wed, 6 Jul 2011 06:01:22 +0000 Subject: davinci: enable forced transitions on PSC Some DaVinci modules like the SATA on DA850 need forced module state transitions. Define a "force" flag which can be passed to the PSC config function to enable it to make forced transitions. Forced transitions shouldn't normally be attempted, unless the TRM explicitly specifies its usage. ChangeLog: v2: Modified to take care of the fact that davinci_psc_config() now takes the flags directly. Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/clock.h | 1 + arch/arm/mach-davinci/include/mach/psc.h | 1 + arch/arm/mach-davinci/psc.c | 2 ++ 3 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index 0dd22031ec62..48ee4627e188 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -111,6 +111,7 @@ struct clk { #define CLK_PLL BIT(4) /* PLL-derived clock */ #define PRE_PLL BIT(5) /* source is before PLL mult/div */ #define PSC_SWRSTDISABLE BIT(6) /* Disable state is SwRstDisable */ +#define PSC_FORCE BIT(7) /* Force module state transtition */ #define CLK(dev, con, ck) \ { \ diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 215fcca6bbdc..6213f0d4211d 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -244,6 +244,7 @@ #define PSC_STATE_ENABLE 3 #define MDSTAT_STATE_MASK 0x1f +#define MDCTL_FORCE BIT(31) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 823cb1b9e484..1fb6bdff38c1 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -75,6 +75,8 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, mdctl = __raw_readl(psc_base + MDCTL + 4 * id); mdctl &= ~MDSTAT_STATE_MASK; mdctl |= next_state; + if (flags & PSC_FORCE) + mdctl |= MDCTL_FORCE; __raw_writel(mdctl, psc_base + MDCTL + 4 * id); pdstat = __raw_readl(psc_base + PDSTAT); -- cgit v1.2.3 From cbb2c9617ae80c99a7b290dbe5cf48ebf9a36ad9 Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Wed, 6 Jul 2011 06:01:23 +0000 Subject: davinci: da850: add support for SATA interface Add support for SATA controller on the DA850/OMAP-L138/AM18x devices. The patch adds the necessary clocks, platform resources and a routine to initialize the SATA controller. The PHY configuration in this patch is courtesy the work done by Zegeye Alemu, Swaminathan and Mansoor Ahamed from TI. While testing this patch, enable port multiplier support iff you are actually using one. The reasons of this behaviour are discussed here: http://patchwork.ozlabs.org/patch/78163/ ChangeLog: v3: Removed fields which were being initialized to zero in PHY configuration. Moved SATA base address definition to the top of the file to make it inline with what is done for the rest of the modules. v2: Addressed comments from Sergei. Removed unnecessary braces and removed unnecessary else after goto. Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/da850.c | 9 +++ arch/arm/mach-davinci/devices-da8xx.c | 126 +++++++++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/da8xx.h | 2 + 3 files changed, 137 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 4e22b8da3493..935dbed5c541 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -374,6 +374,14 @@ static struct clk spi1_clk = { .flags = DA850_CLK_ASYNC3, }; +static struct clk sata_clk = { + .name = "sata", + .parent = &pll0_sysclk2, + .lpsc = DA850_LPSC1_SATA, + .gpsc = 1, + .flags = PSC_FORCE, +}; + static struct clk_lookup da850_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "pll0", &pll0_clk), @@ -420,6 +428,7 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "usb20", &usb20_clk), CLK("spi_davinci.0", NULL, &spi0_clk), CLK("spi_davinci.1", NULL, &spi1_clk), + CLK("ahci", NULL, &sata_clk), CLK(NULL, NULL, NULL), }; diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index fc4e98ea7543..2f7e719636f1 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -14,6 +14,8 @@ #include #include #include +#include +#include #include #include @@ -33,6 +35,7 @@ #define DA8XX_SPI0_BASE 0x01c41000 #define DA830_SPI1_BASE 0x01e12000 #define DA8XX_LCD_CNTRL_BASE 0x01e13000 +#define DA850_SATA_BASE 0x01e18000 #define DA850_MMCSD1_BASE 0x01e1b000 #define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000 #define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000 @@ -842,3 +845,126 @@ int __init da8xx_register_spi(int instance, struct spi_board_info *info, return platform_device_register(&da8xx_spi_device[instance]); } + +#ifdef CONFIG_ARCH_DAVINCI_DA850 + +static struct resource da850_sata_resources[] = { + { + .start = DA850_SATA_BASE, + .end = DA850_SATA_BASE + 0x1fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DA850_SATAINT, + .flags = IORESOURCE_IRQ, + }, +}; + +/* SATA PHY Control Register offset from AHCI base */ +#define SATA_P0PHYCR_REG 0x178 + +#define SATA_PHY_MPY(x) ((x) << 0) +#define SATA_PHY_LOS(x) ((x) << 6) +#define SATA_PHY_RXCDR(x) ((x) << 10) +#define SATA_PHY_RXEQ(x) ((x) << 13) +#define SATA_PHY_TXSWING(x) ((x) << 19) +#define SATA_PHY_ENPLL(x) ((x) << 31) + +static struct clk *da850_sata_clk; +static unsigned long da850_sata_refclkpn; + +/* Supported DA850 SATA crystal frequencies */ +#define KHZ_TO_HZ(freq) ((freq) * 1000) +static unsigned long da850_sata_xtal[] = { + KHZ_TO_HZ(300000), + KHZ_TO_HZ(250000), + 0, /* Reserved */ + KHZ_TO_HZ(187500), + KHZ_TO_HZ(150000), + KHZ_TO_HZ(125000), + KHZ_TO_HZ(120000), + KHZ_TO_HZ(100000), + KHZ_TO_HZ(75000), + KHZ_TO_HZ(60000), +}; + +static int da850_sata_init(struct device *dev, void __iomem *addr) +{ + int i, ret; + unsigned int val; + + da850_sata_clk = clk_get(dev, NULL); + if (IS_ERR(da850_sata_clk)) + return PTR_ERR(da850_sata_clk); + + ret = clk_enable(da850_sata_clk); + if (ret) + goto err0; + + /* Enable SATA clock receiver */ + val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG)); + val &= ~BIT(0); + __raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG)); + + /* Get the multiplier needed for 1.5GHz PLL output */ + for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++) + if (da850_sata_xtal[i] == da850_sata_refclkpn) + break; + + if (i == ARRAY_SIZE(da850_sata_xtal)) { + ret = -EINVAL; + goto err1; + } + + val = SATA_PHY_MPY(i + 1) | + SATA_PHY_LOS(1) | + SATA_PHY_RXCDR(4) | + SATA_PHY_RXEQ(1) | + SATA_PHY_TXSWING(3) | + SATA_PHY_ENPLL(1); + + __raw_writel(val, addr + SATA_P0PHYCR_REG); + + return 0; + +err1: + clk_disable(da850_sata_clk); +err0: + clk_put(da850_sata_clk); + return ret; +} + +static void da850_sata_exit(struct device *dev) +{ + clk_disable(da850_sata_clk); + clk_put(da850_sata_clk); +} + +static struct ahci_platform_data da850_sata_pdata = { + .init = da850_sata_init, + .exit = da850_sata_exit, +}; + +static u64 da850_sata_dmamask = DMA_BIT_MASK(32); + +static struct platform_device da850_sata_device = { + .name = "ahci", + .id = -1, + .dev = { + .platform_data = &da850_sata_pdata, + .dma_mask = &da850_sata_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(da850_sata_resources), + .resource = da850_sata_resources, +}; + +int __init da850_register_sata(unsigned long refclkpn) +{ + da850_sata_refclkpn = refclkpn; + if (!da850_sata_refclkpn) + return -EINVAL; + + return platform_device_register(&da850_sata_device); +} +#endif diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index ad64da713fc8..eaca7d8b9d68 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -57,6 +57,7 @@ extern unsigned int da850_max_speed; #define DA8XX_SYSCFG1_BASE (IO_PHYS + 0x22C000) #define DA8XX_SYSCFG1_VIRT(x) (da8xx_syscfg1_base + (x)) #define DA8XX_DEEPSLEEP_REG 0x8 +#define DA8XX_PWRDN_REG 0x18 #define DA8XX_PSC0_BASE 0x01c10000 #define DA8XX_PLL0_BASE 0x01c11000 @@ -89,6 +90,7 @@ int da850_register_cpufreq(char *async_clk); int da8xx_register_cpuidle(void); void __iomem * __init da8xx_get_mem_ctlr(void); int da850_register_pm(struct platform_device *pdev); +int __init da850_register_sata(unsigned long refclkpn); extern struct platform_device da8xx_serial_device; extern struct emac_platform_data da8xx_emac_pdata; -- cgit v1.2.3 From 8bb2c4813c534d26eba3beb7888fbd3cbc931f62 Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Wed, 6 Jul 2011 06:01:24 +0000 Subject: davinci: da850 evm: register SATA device Register the platform device for SATA interface present on the DA850/OMAP-L138/AM18x EVM. Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-da850-evm.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index a7b41bf505f1..3d2c0d7d129f 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -1117,6 +1117,8 @@ static __init int da850_evm_init_cpufreq(void) static __init int da850_evm_init_cpufreq(void) { return 0; } #endif +#define DA850EVM_SATA_REFCLKPN_RATE (100 * 1000 * 1000) + static __init void da850_evm_init(void) { int ret; @@ -1237,6 +1239,11 @@ static __init void da850_evm_init(void) if (ret) pr_warning("da850_evm_init: spi 1 registration failed: %d\n", ret); + + ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE); + if (ret) + pr_warning("da850_evm_init: sata registration failed: %d\n", + ret); } #ifdef CONFIG_SERIAL_8250_CONSOLE -- cgit v1.2.3 From 7db2b37751caa2f17b026223a382eca07c90c575 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 21 Mar 2011 16:14:43 +0100 Subject: arm: lpc32xx: add tsc-device Fix the clock name, too. Signed-off-by: Wolfram Sang Tested-by: Kevin Wells --- arch/arm/mach-lpc32xx/clock.c | 2 +- arch/arm/mach-lpc32xx/common.c | 21 +++++++++++++++++++++ arch/arm/mach-lpc32xx/common.h | 1 + 3 files changed, 23 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c index da0e6498110a..1e027514096d 100644 --- a/arch/arm/mach-lpc32xx/clock.c +++ b/arch/arm/mach-lpc32xx/clock.c @@ -1077,7 +1077,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand) _REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0) _REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1) - _REGISTER_CLOCK("lpc32xx-ts", NULL, clk_tsc) + _REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc) _REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc) _REGISTER_CLOCK("lpc-net.0", NULL, clk_net) _REGISTER_CLOCK("dev:clcd", NULL, clk_lcd) diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c index ee24dc28e93e..6880b47a9ae5 100644 --- a/arch/arm/mach-lpc32xx/common.c +++ b/arch/arm/mach-lpc32xx/common.c @@ -95,6 +95,27 @@ struct platform_device lpc32xx_i2c2_device = { }, }; +/* TSC (Touch Screen Controller) */ + +static struct resource lpc32xx_tsc_resources[] = { + { + .start = LPC32XX_ADC_BASE, + .end = LPC32XX_ADC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_LPC32XX_TS_IRQ, + .end = IRQ_LPC32XX_TS_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device lpc32xx_tsc_device = { + .name = "ts-lpc32xx", + .id = -1, + .num_resources = ARRAY_SIZE(lpc32xx_tsc_resources), + .resource = lpc32xx_tsc_resources, +}; + /* * Returns the unique ID for the device */ diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h index f82211fd80c1..e81243c79f77 100644 --- a/arch/arm/mach-lpc32xx/common.h +++ b/arch/arm/mach-lpc32xx/common.h @@ -28,6 +28,7 @@ extern struct platform_device lpc32xx_watchdog_device; extern struct platform_device lpc32xx_i2c0_device; extern struct platform_device lpc32xx_i2c1_device; extern struct platform_device lpc32xx_i2c2_device; +extern struct platform_device lpc32xx_tsc_device; /* * Other arch specific structures and functions -- cgit v1.2.3 From 1c72f9eaa53e920f142f4c1d20b4fc82b1a10ed5 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 28 Mar 2011 16:51:35 +0200 Subject: arm: lpc32xx: add rtc-device Signed-off-by: Wolfram Sang Tested-by: Kevin Wells --- arch/arm/mach-lpc32xx/common.c | 21 +++++++++++++++++++++ arch/arm/mach-lpc32xx/common.h | 1 + 2 files changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c index 6880b47a9ae5..205b2dbb565b 100644 --- a/arch/arm/mach-lpc32xx/common.c +++ b/arch/arm/mach-lpc32xx/common.c @@ -116,6 +116,27 @@ struct platform_device lpc32xx_tsc_device = { .resource = lpc32xx_tsc_resources, }; +/* RTC */ + +static struct resource lpc32xx_rtc_resources[] = { + { + .start = LPC32XX_RTC_BASE, + .end = LPC32XX_RTC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_LPC32XX_RTC, + .end = IRQ_LPC32XX_RTC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device lpc32xx_rtc_device = { + .name = "rtc-lpc32xx", + .id = -1, + .num_resources = ARRAY_SIZE(lpc32xx_rtc_resources), + .resource = lpc32xx_rtc_resources, +}; + /* * Returns the unique ID for the device */ diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h index e81243c79f77..5583f52662bd 100644 --- a/arch/arm/mach-lpc32xx/common.h +++ b/arch/arm/mach-lpc32xx/common.h @@ -29,6 +29,7 @@ extern struct platform_device lpc32xx_i2c0_device; extern struct platform_device lpc32xx_i2c1_device; extern struct platform_device lpc32xx_i2c2_device; extern struct platform_device lpc32xx_tsc_device; +extern struct platform_device lpc32xx_rtc_device; /* * Other arch specific structures and functions -- cgit v1.2.3 From a4841e39f7ca85ee2a40803ebac6221c6d8822c0 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 11 Jul 2011 22:25:43 +0100 Subject: ARM: introduce handle_IRQ() not to dump exception stack On Mon, Jul 11, 2011 at 3:52 PM, Russell King - ARM Linux wrote: ... > The __exception annotation on a function causes this to happen: > > [] (asm_do_IRQ+0x6c/0x8c) from [] > (__irq_svc+0x44/0xcc) > Exception stack(0xc3897c78 to 0xc3897cc0) > 7c60: 4022d320 4022e000 > 7c80: 08000075 00001000 c32273c0 c03ce1c0 c2b49b78 4022d000 c2b420b4 00000001 > 7ca0: 00000000 c3897cfc 00000000 c3897cc0 c00afc54 c002edd8 00000013 ffffffff > > Where that stack dump represents the pt_regs for the exception which > happened. Any function found in while unwinding will cause this to > be printed. > > If you insert a C function between the IRQ assembly and asm_do_IRQ, > the > dump you get from asm_do_IRQ will be the stack for your function, > not > the pt_regs. That makes the feature useless. > When __irq_svc - or any of the other exception handling assembly code - calls the C code, the stack pointer will be pointing at the pt_regs structure. All the entry points into C code from the exception handling code are marked with __exception or __exception_irq_enter to indicate that they are one of the functions which has pt_regs above them. Normally, when you've entered asm_do_IRQ() you will have this stack layout (higher address towards top): pt_regs asm_do_IRQ frame If you insert a C function between the exception assembly code and asm_do_IRQ, you end up with this stack layout instead: pt_regs your function frame asm_do_IRQ frame This means when we unwind, we'll get to asm_do_IRQ, and rather than dumping out the pt_regs, we'll dump out your functions stack frame instead, because that's what is above the asm_do_IRQ stack frame rather than the expected pt_regs structure. The fix is to introduce handle_IRQ() for no exception stack dump, so it can be called with MULTI_IRQ_HANDLER is selected and a C function is between the assembly code and the actual IRQ handling code. Signed-off-by: Russell King Signed-off-by: Eric Miao --- arch/arm/include/asm/irq.h | 1 + arch/arm/kernel/irq.c | 19 ++++++++++++++----- 2 files changed, 15 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h index 2721a5814cb9..5a526afb5f18 100644 --- a/arch/arm/include/asm/irq.h +++ b/arch/arm/include/asm/irq.h @@ -23,6 +23,7 @@ struct pt_regs; extern void migrate_irqs(void); extern void asm_do_IRQ(unsigned int, struct pt_regs *); +void handle_IRQ(unsigned int, struct pt_regs *); void init_IRQ(void); #endif diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 83bbad03fcc6..dbc1f41575b2 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -67,12 +67,12 @@ int arch_show_interrupts(struct seq_file *p, int prec) } /* - * do_IRQ handles all hardware IRQ's. Decoded IRQs should not - * come via this function. Instead, they should provide their - * own 'handler' + * handle_IRQ handles all hardware IRQ's. Decoded IRQs should + * not come via this function. Instead, they should provide their + * own 'handler'. Used by platform code implementing C-based 1st + * level decoding. */ -asmlinkage void __exception_irq_entry -asm_do_IRQ(unsigned int irq, struct pt_regs *regs) +void handle_IRQ(unsigned int irq, struct pt_regs *regs) { struct pt_regs *old_regs = set_irq_regs(regs); @@ -97,6 +97,15 @@ asm_do_IRQ(unsigned int irq, struct pt_regs *regs) set_irq_regs(old_regs); } +/* + * asm_do_IRQ is the interface to be used from assembly code. + */ +asmlinkage void __exception_irq_entry +asm_do_IRQ(unsigned int irq, struct pt_regs *regs) +{ + handle_IRQ(irq, regs); +} + void set_irq_flags(unsigned int irq, unsigned int iflags) { unsigned long clr = 0, set = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN; -- cgit v1.2.3 From 4e234cc0ee9db31d5b16b58d7c09af17246b2466 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 4 Apr 2011 15:06:33 +0800 Subject: ARM: pxa: enable AUTO_ZRELADDR Signed-off-by: Eric Miao --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9adc278a22ab..47c22a7df982 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -618,6 +618,7 @@ config ARCH_PXA select TICK_ONESHOT select PLAT_PXA select SPARSE_IRQ + select AUTO_ZRELADDR help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -- cgit v1.2.3 From 52585ccd93d75e368382af09ae336ed8f231642c Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Fri, 8 Apr 2011 20:15:38 +0800 Subject: ARM: pxa: add clk_set_rate() Since there're mulitple clock rates in some device controllers, enable clk_set_rate() for this usage. Signed-off-by: Haojian Zhuang Signed-off-by: Eric Miao --- arch/arm/mach-mmp/clock.c | 15 +++++++++++++++ arch/arm/mach-mmp/clock.h | 1 + arch/arm/mach-pxa/clock.c | 15 +++++++++++++++ arch/arm/mach-pxa/clock.h | 1 + 4 files changed, 32 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c index 886e05648f08..7c6f95f29142 100644 --- a/arch/arm/mach-mmp/clock.c +++ b/arch/arm/mach-mmp/clock.c @@ -88,3 +88,18 @@ unsigned long clk_get_rate(struct clk *clk) return rate; } EXPORT_SYMBOL(clk_get_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + int ret = -EINVAL; + + if (clk->ops->setrate) { + spin_lock_irqsave(&clocks_lock, flags); + ret = clk->ops->setrate(clk, rate); + spin_unlock_irqrestore(&clocks_lock, flags); + } + + return ret; +} +EXPORT_SYMBOL(clk_set_rate); diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h index 9b027d7491f5..3143e994e672 100644 --- a/arch/arm/mach-mmp/clock.h +++ b/arch/arm/mach-mmp/clock.h @@ -12,6 +12,7 @@ struct clkops { void (*enable)(struct clk *); void (*disable)(struct clk *); unsigned long (*getrate)(struct clk *); + int (*setrate)(struct clk *, unsigned long); }; struct clk { diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c index d5152220ce94..4d466102a027 100644 --- a/arch/arm/mach-pxa/clock.c +++ b/arch/arm/mach-pxa/clock.c @@ -53,6 +53,21 @@ unsigned long clk_get_rate(struct clk *clk) } EXPORT_SYMBOL(clk_get_rate); +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + int ret = -EINVAL; + + if (clk->ops->setrate) { + spin_lock_irqsave(&clocks_lock, flags); + ret = clk->ops->setrate(clk, rate); + spin_unlock_irqrestore(&clocks_lock, flags); + } + + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + void clk_dummy_enable(struct clk *clk) { } diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h index 1f2fb9c43f06..3a258b1bf1aa 100644 --- a/arch/arm/mach-pxa/clock.h +++ b/arch/arm/mach-pxa/clock.h @@ -5,6 +5,7 @@ struct clkops { void (*enable)(struct clk *); void (*disable)(struct clk *); unsigned long (*getrate)(struct clk *); + int (*setrate)(struct clk *, unsigned long); }; struct clk { -- cgit v1.2.3 From 9c86441081e84c9fb9fac3929c6e7d3e6f4dd891 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 18 May 2011 15:35:54 +0800 Subject: ARM: pxa: add common header file for pxa3xx Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/pxa300.h | 3 +-- arch/arm/mach-pxa/include/mach/pxa320.h | 3 +-- arch/arm/mach-pxa/include/mach/pxa3xx.h | 7 +++++++ arch/arm/mach-pxa/include/mach/pxa930.h | 3 +-- 4 files changed, 10 insertions(+), 6 deletions(-) create mode 100644 arch/arm/mach-pxa/include/mach/pxa3xx.h (limited to 'arch') diff --git a/arch/arm/mach-pxa/include/mach/pxa300.h b/arch/arm/mach-pxa/include/mach/pxa300.h index 2f33076c9e48..733b6412c3df 100644 --- a/arch/arm/mach-pxa/include/mach/pxa300.h +++ b/arch/arm/mach-pxa/include/mach/pxa300.h @@ -1,8 +1,7 @@ #ifndef __MACH_PXA300_H #define __MACH_PXA300_H -#include -#include +#include #include #endif /* __MACH_PXA300_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa320.h b/arch/arm/mach-pxa/include/mach/pxa320.h index cab78e903273..b6204e470d89 100644 --- a/arch/arm/mach-pxa/include/mach/pxa320.h +++ b/arch/arm/mach-pxa/include/mach/pxa320.h @@ -1,8 +1,7 @@ #ifndef __MACH_PXA320_H #define __MACH_PXA320_H -#include -#include +#include #include #endif /* __MACH_PXA320_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx.h b/arch/arm/mach-pxa/include/mach/pxa3xx.h new file mode 100644 index 000000000000..5b9552d8908a --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa3xx.h @@ -0,0 +1,7 @@ +#ifndef __MACH_PXA3XX_H +#define __MACH_PXA3XX_H + +#include +#include + +#endif /* __MACH_PXA3XX_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa930.h b/arch/arm/mach-pxa/include/mach/pxa930.h index d45f76a9b54d..190363b98d01 100644 --- a/arch/arm/mach-pxa/include/mach/pxa930.h +++ b/arch/arm/mach-pxa/include/mach/pxa930.h @@ -1,8 +1,7 @@ #ifndef __MACH_PXA930_H #define __MACH_PXA930_H -#include -#include +#include #include #endif /* __MACH_PXA930_H */ -- cgit v1.2.3 From 5d284e353eb11ab2e8b1c5671ba06489b0bd1e0c Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 27 Apr 2011 22:48:04 +0800 Subject: ARM: pxa: avoid accessing interrupt registers directly Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/irqs.h | 7 +++++++ arch/arm/mach-pxa/include/mach/regs-intc.h | 30 ------------------------------ arch/arm/mach-pxa/irq.c | 4 ++-- arch/arm/mach-pxa/pxa3xx.c | 5 ++--- arch/arm/mach-pxa/pxa95x.c | 1 - 5 files changed, 11 insertions(+), 36 deletions(-) delete mode 100644 arch/arm/mach-pxa/include/mach/regs-intc.h (limited to 'arch') diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index 038402404e39..a94c694b4af9 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -104,4 +104,11 @@ #define NR_IRQS (IRQ_BOARD_START) +#ifndef __ASSEMBLY__ +struct irq_data; + +void pxa_mask_irq(struct irq_data *); +void pxa_unmask_irq(struct irq_data *); +#endif + #endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h deleted file mode 100644 index 662288eb6f95..000000000000 --- a/arch/arm/mach-pxa/include/mach/regs-intc.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef __ASM_MACH_REGS_INTC_H -#define __ASM_MACH_REGS_INTC_H - -#include - -/* - * Interrupt Controller - */ - -#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ -#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ -#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ -#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ -#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ -#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ -#define ICHP __REG(0x40D00018) /* Interrupt Controller Highest Priority Register */ - -#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ -#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ -#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ -#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ -#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ - -#define ICIP3 __REG(0x40D00130) /* Interrupt Controller IRQ Pending Register 3 */ -#define ICMR3 __REG(0x40D00134) /* Interrupt Controller Mask Register 3 */ -#define ICLR3 __REG(0x40D00138) /* Interrupt Controller Level Register 3 */ -#define ICFP3 __REG(0x40D0013C) /* Interrupt Controller FIQ Pending Register 3 */ -#define ICPR3 __REG(0x40D00140) /* Interrupt Controller Pending Register 3 */ - -#endif /* __ASM_MACH_REGS_INTC_H */ diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 32ed551bf9c5..c89c0e40fe32 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -64,7 +64,7 @@ static inline void __iomem *irq_base(int i) return (void __iomem *)io_p2v(phys_base[i]); } -static void pxa_mask_irq(struct irq_data *d) +void pxa_mask_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); uint32_t icmr = __raw_readl(base + ICMR); @@ -73,7 +73,7 @@ static void pxa_mask_irq(struct irq_data *d) __raw_writel(icmr, base + ICMR); } -static void pxa_unmask_irq(struct irq_data *d) +void pxa_unmask_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); uint32_t icmr = __raw_readl(base + ICMR); diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 8521d7d6f1da..e66dc1562cda 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include "generic.h" @@ -328,13 +327,13 @@ static void pxa_ack_ext_wakeup(struct irq_data *d) static void pxa_mask_ext_wakeup(struct irq_data *d) { - ICMR2 &= ~(1 << ((d->irq - PXA_IRQ(0)) & 0x1f)); + pxa_mask_irq(d); PECR &= ~PECR_IE(d->irq - IRQ_WAKEUP0); } static void pxa_unmask_ext_wakeup(struct irq_data *d) { - ICMR2 |= 1 << ((d->irq - PXA_IRQ(0)) & 0x1f); + pxa_unmask_irq(d); PECR |= PECR_IE(d->irq - IRQ_WAKEUP0); } diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index ecc82a330fad..0ee166b61f81 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -27,7 +27,6 @@ #include #include #include -#include #include "generic.h" #include "devices.h" -- cgit v1.2.3 From a551e4f787220459c6e78668a15cbe01f1ac7637 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 27 Apr 2011 22:48:05 +0800 Subject: ARM: pxa: introduce {icip,ichp}_handle_irq() to prepare MULTI_IRQ_HANDLER Thanks Dmitry for providing a fix to the original code. Signed-off-by: Eric Miao Signed-off-by: Dmitry Eremin-Solenikov --- arch/arm/mach-pxa/include/mach/irqs.h | 3 +++ arch/arm/mach-pxa/irq.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 35 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index a94c694b4af9..564337de9582 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -106,9 +106,12 @@ #ifndef __ASSEMBLY__ struct irq_data; +struct pt_regs; void pxa_mask_irq(struct irq_data *); void pxa_unmask_irq(struct irq_data *); +void icip_handle_irq(struct pt_regs *); +void ichp_handle_irq(struct pt_regs *); #endif #endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index c89c0e40fe32..b09e848eb6c6 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -37,6 +37,8 @@ #define IPR(i) (((i) < 32) ? (0x01c + ((i) << 2)) : \ ((i) < 64) ? (0x0b0 + (((i) - 32) << 2)) : \ (0x144 + (((i) - 64) << 2))) +#define ICHP_VAL_IRQ (1 << 31) +#define ICHP_IRQ(i) (((i) >> 16) & 0x7fff) #define IPR_VALID (1 << 31) #define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f) @@ -127,6 +129,36 @@ static struct irq_chip pxa_low_gpio_chip = { .irq_set_type = pxa_set_low_gpio_type, }; +asmlinkage void __exception_irq_entry icip_handle_irq(struct pt_regs *regs) +{ + uint32_t icip, icmr, mask; + + do { + icip = __raw_readl(IRQ_BASE + ICIP); + icmr = __raw_readl(IRQ_BASE + ICMR); + mask = icip & icmr; + + if (mask == 0) + break; + + handle_IRQ(PXA_IRQ(fls(mask) - 1), regs); + } while (1); +} + +asmlinkage void __exception_irq_entry ichp_handle_irq(struct pt_regs *regs) +{ + uint32_t ichp; + + do { + __asm__ __volatile__("mrc p6, 0, %0, c5, c0, 0\n": "=r"(ichp)); + + if ((ichp & ICHP_VAL_IRQ) == 0) + break; + + handle_IRQ(PXA_IRQ(ICHP_IRQ(ichp)), regs); + } while (1); +} + static void __init pxa_init_low_gpio_irq(set_wake_t fn) { int irq; -- cgit v1.2.3 From ca0e687c8ea5a7ae4b1c7a735f797f95ed953f9a Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 18 May 2011 21:19:04 +0800 Subject: ARM: pxa: move declarations from generic.h to .h Signed-off-by: Eric Miao --- arch/arm/mach-pxa/cm-x2xx.c | 3 ++- arch/arm/mach-pxa/colibri-pxa320.c | 3 +-- arch/arm/mach-pxa/csb726.c | 3 +-- arch/arm/mach-pxa/generic.h | 13 ------------- arch/arm/mach-pxa/himalaya.c | 3 +-- arch/arm/mach-pxa/include/mach/irqs.h | 2 ++ arch/arm/mach-pxa/include/mach/pxa25x.h | 6 ++++++ arch/arm/mach-pxa/include/mach/pxa27x.h | 3 +++ arch/arm/mach-pxa/include/mach/pxa3xx.h | 4 ++++ arch/arm/mach-pxa/palmtc.c | 3 +-- arch/arm/mach-pxa/palmte2.c | 2 +- arch/arm/mach-pxa/raumfeld.c | 5 +---- arch/arm/mach-pxa/xcep.c | 3 +-- arch/arm/mach-pxa/zeus.c | 3 +-- arch/arm/mach-pxa/zylonite.c | 2 +- 15 files changed, 26 insertions(+), 32 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index a10996782476..7cc7414bafcf 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -21,7 +21,8 @@ #include #include -#include +#include +#include #include #include #include diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index ff9ff5f4fc47..42b8929acfa7 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -23,8 +23,7 @@ #include #include -#include -#include +#include #include #include #include diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 0481c29a70e8..6e95e819f8a1 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -22,10 +22,9 @@ #include #include #include -#include +#include #include #include -#include #include #include diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index e6c9344a95ae..92a2e85ab02c 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -13,21 +13,8 @@ struct irq_data; struct sys_timer; extern struct sys_timer pxa_timer; -extern void __init pxa_init_irq(int irq_nr, - int (*set_wake)(struct irq_data *, - unsigned int)); -extern void __init pxa25x_init_irq(void); -#ifdef CONFIG_CPU_PXA26x -extern void __init pxa26x_init_irq(void); -#endif -extern void __init pxa27x_init_irq(void); -extern void __init pxa3xx_init_irq(void); -extern void __init pxa95x_init_irq(void); extern void __init pxa_map_io(void); -extern void __init pxa25x_map_io(void); -extern void __init pxa27x_map_io(void); -extern void __init pxa3xx_map_io(void); extern unsigned int get_clk_frequency_khz(int info); diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c index e8603eba54bd..a2ea97926a6d 100644 --- a/arch/arm/mach-pxa/himalaya.c +++ b/arch/arm/mach-pxa/himalaya.c @@ -24,8 +24,7 @@ #include #include -#include -#include +#include #include "generic.h" diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index 564337de9582..7cc5a781e99e 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -112,6 +112,8 @@ void pxa_mask_irq(struct irq_data *); void pxa_unmask_irq(struct irq_data *); void icip_handle_irq(struct pt_regs *); void ichp_handle_irq(struct pt_regs *); + +void pxa_init_irq(int irq_nr, int (*set_wake)(struct irq_data *, unsigned int)); #endif #endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa25x.h b/arch/arm/mach-pxa/include/mach/pxa25x.h index 508c3ba1f4d0..187b14c26a65 100644 --- a/arch/arm/mach-pxa/include/mach/pxa25x.h +++ b/arch/arm/mach-pxa/include/mach/pxa25x.h @@ -4,5 +4,11 @@ #include #include #include +#include +extern void __init pxa25x_map_io(void); +extern void __init pxa25x_init_irq(void); +#ifdef CONFIG_CPU_PXA26x +extern void __init pxa26x_init_irq(void); +#endif #endif /* __MACH_PXA25x_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h index 0b702693f458..801f170b1207 100644 --- a/arch/arm/mach-pxa/include/mach/pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/pxa27x.h @@ -4,6 +4,7 @@ #include #include #include +#include #define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ @@ -17,6 +18,8 @@ #define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ #define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ +extern void __init pxa27x_map_io(void); +extern void __init pxa27x_init_irq(void); extern int __init pxa27x_set_pwrmode(unsigned int mode); #endif /* __MACH_PXA27x_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx.h b/arch/arm/mach-pxa/include/mach/pxa3xx.h index 5b9552d8908a..c50a1b5c3812 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx.h @@ -3,5 +3,9 @@ #include #include +#include +extern void __init pxa3xx_map_io(void); +extern void __init pxa3xx_init_irq(void); +extern void __init pxa95x_init_irq(void); #endif /* __MACH_PXA3XX_H */ diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index fb06bd047272..796d391857dc 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -31,14 +31,13 @@ #include #include +#include #include #include #include #include -#include #include #include -#include #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 726f5b98dcd3..6e59c5fc5a34 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -31,11 +31,11 @@ #include #include +#include #include #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index d130f77b6d11..ad1a313c8fca 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -46,10 +46,7 @@ #include #include -#include -#include -#include -#include +#include #include #include #include diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index f55f8f2e0db3..03cfd60a6560 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -28,8 +28,7 @@ #include #include -#include -#include +#include #include #include "generic.h" diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 00363c7ac182..973590e8dba7 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -34,14 +34,13 @@ #include #include -#include +#include #include #include #include #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 5821185f77ab..23776fb7cbda 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -24,7 +24,7 @@ #include #include -#include +#include #include #include #include -- cgit v1.2.3 From 8a97ae2f554d762a4bc67b5d13b52ef39c8d6baa Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 18 May 2011 21:30:04 +0800 Subject: ARM: pxa: enable MULTI_IRQ_HANDLER for all boards Signed-off-by: Eric Miao --- arch/arm/Kconfig | 1 + arch/arm/mach-pxa/balloon3.c | 1 + arch/arm/mach-pxa/capc7117.c | 1 + arch/arm/mach-pxa/cm-x2xx.c | 2 ++ arch/arm/mach-pxa/cm-x300.c | 1 + arch/arm/mach-pxa/colibri-pxa270.c | 2 ++ arch/arm/mach-pxa/colibri-pxa300.c | 1 + arch/arm/mach-pxa/colibri-pxa320.c | 1 + arch/arm/mach-pxa/corgi.c | 3 +++ arch/arm/mach-pxa/csb726.c | 1 + arch/arm/mach-pxa/em-x270.c | 2 ++ arch/arm/mach-pxa/eseries.c | 6 ++++++ arch/arm/mach-pxa/ezx.c | 6 ++++++ arch/arm/mach-pxa/gumstix.c | 1 + arch/arm/mach-pxa/h5000.c | 2 ++ arch/arm/mach-pxa/himalaya.c | 1 + arch/arm/mach-pxa/hx4700.c | 1 + arch/arm/mach-pxa/icontrol.c | 1 + arch/arm/mach-pxa/idp.c | 1 + arch/arm/mach-pxa/include/mach/pxa25x.h | 3 +++ arch/arm/mach-pxa/include/mach/pxa27x.h | 2 ++ arch/arm/mach-pxa/include/mach/pxa3xx.h | 3 +++ arch/arm/mach-pxa/littleton.c | 1 + arch/arm/mach-pxa/lpd270.c | 1 + arch/arm/mach-pxa/lubbock.c | 1 + arch/arm/mach-pxa/magician.c | 1 + arch/arm/mach-pxa/mainstone.c | 1 + arch/arm/mach-pxa/mioa701.c | 1 + arch/arm/mach-pxa/mp900.c | 1 + arch/arm/mach-pxa/palmld.c | 1 + arch/arm/mach-pxa/palmt5.c | 1 + arch/arm/mach-pxa/palmtc.c | 1 + arch/arm/mach-pxa/palmte2.c | 1 + arch/arm/mach-pxa/palmtreo.c | 2 ++ arch/arm/mach-pxa/palmtx.c | 1 + arch/arm/mach-pxa/palmz72.c | 1 + arch/arm/mach-pxa/pcm027.c | 1 + arch/arm/mach-pxa/poodle.c | 1 + arch/arm/mach-pxa/raumfeld.c | 3 +++ arch/arm/mach-pxa/saar.c | 1 + arch/arm/mach-pxa/saarb.c | 1 + arch/arm/mach-pxa/spitz.c | 3 +++ arch/arm/mach-pxa/stargate2.c | 2 ++ arch/arm/mach-pxa/tavorevb.c | 1 + arch/arm/mach-pxa/tavorevb3.c | 1 + arch/arm/mach-pxa/tosa.c | 1 + arch/arm/mach-pxa/trizeps4.c | 2 ++ arch/arm/mach-pxa/viper.c | 1 + arch/arm/mach-pxa/vpac270.c | 1 + arch/arm/mach-pxa/xcep.c | 1 + arch/arm/mach-pxa/z2.c | 1 + arch/arm/mach-pxa/zeus.c | 1 + arch/arm/mach-pxa/zylonite.c | 1 + 53 files changed, 81 insertions(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 47c22a7df982..3eacf575037c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -619,6 +619,7 @@ config ARCH_PXA select PLAT_PXA select SPARSE_IRQ select AUTO_ZRELADDR + select MULTI_IRQ_HANDLER help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 810a982a66f8..ef3e8b1e06c1 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -825,6 +825,7 @@ MACHINE_START(BALLOON3, "Balloon3") .map_io = balloon3_map_io, .nr_irqs = BALLOON3_NR_IRQS, .init_irq = balloon3_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = balloon3_init, .boot_params = PLAT_PHYS_OFFSET + 0x100, diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c index 4284513f396a..648b0ab2bf77 100644 --- a/arch/arm/mach-pxa/capc7117.c +++ b/arch/arm/mach-pxa/capc7117.c @@ -151,6 +151,7 @@ MACHINE_START(CAPC7117, .boot_params = 0xa0000100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = capc7117_init MACHINE_END diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index 7cc7414bafcf..1719927c24d6 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -517,6 +517,8 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX") .map_io = cmx2xx_map_io, .nr_irqs = CMX2XX_NR_IRQS, .init_irq = cmx2xx_init_irq, + /* NOTE: pxa25x_handle_irq() works on PXA27x w/o camera support */ + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = cmx2xx_init, MACHINE_END diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index b2248e76ec8b..de577c7e3ace 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -859,6 +859,7 @@ MACHINE_START(CM_X300, "CM-X300 module") .boot_params = 0xa0000100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = cm_x300_init, .fixup = cm_x300_fixup, diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 7545a48ed88b..870920934ecf 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -310,6 +310,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270") .init_machine = colibri_pxa270_init, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, MACHINE_END @@ -318,6 +319,7 @@ MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC") .init_machine = colibri_pxa270_income_init, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 66dd81cbc8a0..60a6781e7a8e 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -187,6 +187,7 @@ MACHINE_START(COLIBRI300, "Toradex Colibri PXA300") .init_machine = colibri_pxa300_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 42b8929acfa7..d2c6631915d4 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -257,6 +257,7 @@ MACHINE_START(COLIBRI320, "Toradex Colibri PXA320") .init_machine = colibri_pxa320_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 3a5507e31919..185a37cad254 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -722,6 +722,7 @@ MACHINE_START(CORGI, "SHARP Corgi") .fixup = fixup_corgi, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END @@ -732,6 +733,7 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd") .fixup = fixup_corgi, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END @@ -742,6 +744,7 @@ MACHINE_START(HUSKY, "SHARP Husky") .fixup = fixup_corgi, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 6e95e819f8a1..fe812eafb1f1 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -275,6 +275,7 @@ MACHINE_START(CSB726, "Cogent CSB726") .boot_params = 0xa0000100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .init_machine = csb726_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index f8a6e9d79a3a..2e37ea52b372 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -1302,6 +1302,7 @@ MACHINE_START(EM_X270, "Compulab EM-X270") .boot_params = 0xa0000100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = em_x270_init, MACHINE_END @@ -1310,6 +1311,7 @@ MACHINE_START(EXEDA, "Compulab eXeda") .boot_params = 0xa0000100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = em_x270_init, MACHINE_END diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 2e3970fdde0b..b4599ec9d619 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -193,6 +193,7 @@ MACHINE_START(E330, "Toshiba e330") .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e330_init, .timer = &pxa_timer, @@ -242,6 +243,7 @@ MACHINE_START(E350, "Toshiba e350") .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e350_init, .timer = &pxa_timer, @@ -364,6 +366,7 @@ MACHINE_START(E400, "Toshiba e400") .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e400_init, .timer = &pxa_timer, @@ -552,6 +555,7 @@ MACHINE_START(E740, "Toshiba e740") .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e740_init, .timer = &pxa_timer, @@ -743,6 +747,7 @@ MACHINE_START(E750, "Toshiba e750") .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e750_init, .timer = &pxa_timer, @@ -947,6 +952,7 @@ MACHINE_START(E800, "Toshiba e800") .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e800_init, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index d88aed8fbe15..b73eadb9f5dc 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -801,6 +801,7 @@ MACHINE_START(EZX_A780, "Motorola EZX A780") .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = a780_init, MACHINE_END @@ -866,6 +867,7 @@ MACHINE_START(EZX_E680, "Motorola EZX E680") .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = e680_init, MACHINE_END @@ -931,6 +933,7 @@ MACHINE_START(EZX_A1200, "Motorola EZX A1200") .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = a1200_init, MACHINE_END @@ -1121,6 +1124,7 @@ MACHINE_START(EZX_A910, "Motorola EZX A910") .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = a910_init, MACHINE_END @@ -1186,6 +1190,7 @@ MACHINE_START(EZX_E6, "Motorola EZX E6") .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = e6_init, MACHINE_END @@ -1225,6 +1230,7 @@ MACHINE_START(EZX_E2, "Motorola EZX E2") .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = e2_init, MACHINE_END diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index d65e4bde9b91..deaa111c91f9 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -236,6 +236,7 @@ MACHINE_START(GUMSTIX, "Gumstix") .boot_params = 0xa0000100, /* match u-boot bi_boot_params */ .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = gumstix_init, MACHINE_END diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index 657db469de1f..0a235128914d 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -205,6 +206,7 @@ MACHINE_START(H5400, "HP iPAQ H5000") .boot_params = 0xa0000100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = h5000_init, MACHINE_END diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c index a2ea97926a6d..a997d0ab2872 100644 --- a/arch/arm/mach-pxa/himalaya.c +++ b/arch/arm/mach-pxa/himalaya.c @@ -161,6 +161,7 @@ MACHINE_START(HIMALAYA, "HTC Himalaya") .boot_params = 0xa0000100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .init_machine = himalaya_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index f941a495a4a8..9a734cb7236e 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -874,6 +874,7 @@ MACHINE_START(H4700, "HP iPAQ HX4700") .map_io = pxa27x_map_io, .nr_irqs = HX4700_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .init_machine = hx4700_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index 6cedc81da3bc..d427429f1f34 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -194,6 +194,7 @@ MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM") .boot_params = 0xa0000100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = icontrol_init MACHINE_END diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index f7fb64f11a7d..ddf20e5c376e 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -196,6 +196,7 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP") /* Maintainer: Vibren Technologies */ .map_io = idp_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = idp_init, MACHINE_END diff --git a/arch/arm/mach-pxa/include/mach/pxa25x.h b/arch/arm/mach-pxa/include/mach/pxa25x.h index 187b14c26a65..3ac0baac7350 100644 --- a/arch/arm/mach-pxa/include/mach/pxa25x.h +++ b/arch/arm/mach-pxa/include/mach/pxa25x.h @@ -11,4 +11,7 @@ extern void __init pxa25x_init_irq(void); #ifdef CONFIG_CPU_PXA26x extern void __init pxa26x_init_irq(void); #endif + +#define pxa25x_handle_irq icip_handle_irq + #endif /* __MACH_PXA25x_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h index 801f170b1207..b9b1bdc4bacc 100644 --- a/arch/arm/mach-pxa/include/mach/pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/pxa27x.h @@ -22,4 +22,6 @@ extern void __init pxa27x_map_io(void); extern void __init pxa27x_init_irq(void); extern int __init pxa27x_set_pwrmode(unsigned int mode); +#define pxa27x_handle_irq ichp_handle_irq + #endif /* __MACH_PXA27x_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx.h b/arch/arm/mach-pxa/include/mach/pxa3xx.h index c50a1b5c3812..cd3e57f42688 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx.h @@ -8,4 +8,7 @@ extern void __init pxa3xx_map_io(void); extern void __init pxa3xx_init_irq(void); extern void __init pxa95x_init_irq(void); + +#define pxa3xx_handle_irq ichp_handle_irq + #endif /* __MACH_PXA3XX_H */ diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index e5e326d2cdc9..8f97e15e86e5 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -441,6 +441,7 @@ MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleto .map_io = pxa3xx_map_io, .nr_irqs = LITTLETON_NR_IRQS, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = littleton_init, MACHINE_END diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 6cf8180bf5bd..c171d6ebee49 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -503,6 +503,7 @@ MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine") .map_io = lpd270_map_io, .nr_irqs = LPD270_NR_IRQS, .init_irq = lpd270_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = lpd270_init, MACHINE_END diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index e10ddb827147..a8c696bfc132 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -553,6 +553,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)") .map_io = lubbock_map_io, .nr_irqs = LUBBOCK_NR_IRQS, .init_irq = lubbock_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = lubbock_init, MACHINE_END diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index e1920572948a..cb3509ee1fe2 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -768,6 +768,7 @@ MACHINE_START(MAGICIAN, "HTC Magician") .map_io = pxa27x_map_io, .nr_irqs = MAGICIAN_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .init_machine = magician_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 3479e2b3b511..4622eb78ef25 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -620,6 +620,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") .map_io = mainstone_map_io, .nr_irqs = MAINSTONE_NR_IRQS, .init_irq = mainstone_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = mainstone_init, MACHINE_END diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index e3470137c934..ff92efd65a53 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -794,6 +794,7 @@ MACHINE_START(MIOA701, "MIO A701") .boot_params = 0xa0000100, .map_io = &pxa27x_map_io, .init_irq = &pxa27x_init_irq, + .handle_irq = &pxa27x_handle_irq, .init_machine = mioa701_machine_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c index 59cce78aebd1..fb408861dbcf 100644 --- a/arch/arm/mach-pxa/mp900.c +++ b/arch/arm/mach-pxa/mp900.c @@ -96,6 +96,7 @@ MACHINE_START(NEC_MP900, "MobilePro900/C") .timer = &pxa_timer, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .init_machine = mp900c_init, MACHINE_END diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 4061ecddee70..6b77365ed938 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -345,6 +345,7 @@ MACHINE_START(PALMLD, "Palm LifeDrive") .boot_params = 0xa0000100, .map_io = palmld_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = palmld_init MACHINE_END diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index df4d7d009fbb..9bd3e47486fb 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -206,6 +206,7 @@ MACHINE_START(PALMT5, "Palm Tungsten|T5") .map_io = pxa27x_map_io, .reserve = palmt5_reserve, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = palmt5_init MACHINE_END diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 796d391857dc..6ad4a6c7bc96 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -540,6 +540,7 @@ MACHINE_START(PALMTC, "Palm Tungsten|C") .boot_params = 0xa0000100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = palmtc_init MACHINE_END diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 6e59c5fc5a34..664232f3e62c 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -359,6 +359,7 @@ MACHINE_START(PALMTE2, "Palm Tungsten|E2") .boot_params = 0xa0000100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = palmte2_init MACHINE_END diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 20d1b18b1733..bb27d4b688d8 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -444,6 +444,7 @@ MACHINE_START(TREO680, "Palm Treo 680") .map_io = pxa27x_map_io, .reserve = treo_reserve, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = treo680_init, MACHINE_END @@ -453,6 +454,7 @@ MACHINE_START(CENTRO, "Palm Centro 685") .map_io = pxa27x_map_io, .reserve = treo_reserve, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = centro_init, MACHINE_END diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 595f002066cc..fc4285589c1f 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -367,6 +367,7 @@ MACHINE_START(PALMTX, "Palm T|X") .boot_params = 0xa0000100, .map_io = palmtx_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = palmtx_init MACHINE_END diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 65f24f0b77e8..95d71c3a5bae 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -401,6 +401,7 @@ MACHINE_START(PALMZ72, "Palm Zire72") .boot_params = 0xa0000100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = palmz72_init MACHINE_END diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index 1fc8a66407ae..ffa65dfb8c6f 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -262,6 +262,7 @@ MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270") .map_io = pcm027_map_io, .nr_irqs = PCM027_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = pcm027_init, MACHINE_END diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 16d14fd79b4b..a113ea9ab4ab 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -468,6 +468,7 @@ MACHINE_START(POODLE, "SHARP Poodle") .map_io = pxa25x_map_io, .nr_irqs = POODLE_NR_IRQS, /* 4 for LoCoMo */ .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = poodle_init, MACHINE_END diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index ad1a313c8fca..8b8cff6a9620 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -1088,6 +1088,7 @@ MACHINE_START(RAUMFELD_RC, "Raumfeld Controller") .init_machine = raumfeld_controller_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, MACHINE_END #endif @@ -1098,6 +1099,7 @@ MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector") .init_machine = raumfeld_connector_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, MACHINE_END #endif @@ -1108,6 +1110,7 @@ MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker") .init_machine = raumfeld_speaker_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index fee97a935122..df4356e8acae 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -599,6 +599,7 @@ MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)") .boot_params = 0xa0000100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = saar_init, MACHINE_END diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index 9322fe527c7f..3b582d691cc6 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -107,6 +107,7 @@ MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)") .map_io = pxa_map_io, .nr_irqs = SAARB_NR_IRQS, .init_irq = pxa95x_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = saarb_init, MACHINE_END diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 01c576963e94..438c7b5e451f 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -984,6 +984,7 @@ MACHINE_START(SPITZ, "SHARP Spitz") .fixup = spitz_fixup, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, .timer = &pxa_timer, MACHINE_END @@ -994,6 +995,7 @@ MACHINE_START(BORZOI, "SHARP Borzoi") .fixup = spitz_fixup, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, .timer = &pxa_timer, MACHINE_END @@ -1004,6 +1006,7 @@ MACHINE_START(AKITA, "SHARP Akita") .fixup = spitz_fixup, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index cb5611daf5fe..3f8d0af9e2f7 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -1001,6 +1001,7 @@ static void __init stargate2_init(void) MACHINE_START(INTELMOTE2, "IMOTE 2") .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = imote2_init, .boot_params = 0xA0000100, @@ -1012,6 +1013,7 @@ MACHINE_START(STARGATE2, "Stargate 2") .map_io = pxa27x_map_io, .nr_irqs = STARGATE_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = stargate2_init, .boot_params = 0xA0000100, diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index 53d4a472b699..32fb58e01b10 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -492,6 +492,7 @@ MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)") .boot_params = 0xa0000100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = tavorevb_init, MACHINE_END diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c index 79f4422f12f4..fd5a8eae0a87 100644 --- a/arch/arm/mach-pxa/tavorevb3.c +++ b/arch/arm/mach-pxa/tavorevb3.c @@ -129,6 +129,7 @@ MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)") .map_io = pxa3xx_map_io, .nr_irqs = TAVOREVB3_NR_IRQS, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = evb3_init, MACHINE_END diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 5fa145778e7d..9f69a2682693 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -974,6 +974,7 @@ MACHINE_START(TOSA, "SHARP Tosa") .map_io = pxa25x_map_io, .nr_irqs = TOSA_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .init_machine = tosa_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 687417a93698..c0417508f39d 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -558,6 +558,7 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module") .init_machine = trizeps4_init, .map_io = trizeps4_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, MACHINE_END @@ -567,5 +568,6 @@ MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module") .init_machine = trizeps4_init, .map_io = trizeps4_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 903218eab56d..d4a3dc74e84a 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -995,6 +995,7 @@ MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC") .boot_params = 0xa0000100, .map_io = viper_map_io, .init_irq = viper_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = viper_init, MACHINE_END diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index 67bd41488bf8..5f8490ab07cb 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -719,6 +719,7 @@ MACHINE_START(VPAC270, "Voipac PXA270") .boot_params = 0xa0000100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = vpac270_init MACHINE_END diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index 03cfd60a6560..acc600f5e72f 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -184,6 +184,7 @@ MACHINE_START(XCEP, "Iskratel XCEP") .init_machine = xcep_init, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index fbe9e02e2f9f..e9b38cdc9269 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -704,6 +704,7 @@ MACHINE_START(ZIPIT2, "Zipit Z2") .boot_params = 0xa0000100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = z2_init, MACHINE_END diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 973590e8dba7..667e0956a567 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -907,6 +907,7 @@ MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS") .map_io = zeus_map_io, .nr_irqs = ZEUS_NR_IRQS, .init_irq = zeus_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = zeus_init, MACHINE_END diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 23776fb7cbda..15ec66b3471a 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -426,6 +426,7 @@ MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") .map_io = pxa3xx_map_io, .nr_irqs = ZYLONITE_NR_IRQS, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = zylonite_init, MACHINE_END -- cgit v1.2.3 From 41646b24993590c49d21e6cc0f4378505e1f94a6 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Tue, 15 Mar 2011 22:11:17 +0200 Subject: ARM: pxa/z2: add poweroff function Signed-off-by: Vasily Khoruzhick Signed-off-by: Eric Miao --- arch/arm/mach-pxa/z2.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index e9b38cdc9269..6c9275a20c91 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -40,6 +40,7 @@ #include #include #include +#include #include "generic.h" #include "devices.h" @@ -677,6 +678,20 @@ static void __init z2_pmic_init(void) static inline void z2_pmic_init(void) {} #endif +#ifdef CONFIG_PM +static void z2_power_off(void) +{ + /* We're using deep sleep as poweroff, so clear PSPR to ensure that + * bootloader will jump to its entry point in resume handler + */ + PSPR = 0x0; + local_irq_disable(); + pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET); +} +#else +#define z2_power_off NULL +#endif + /****************************************************************************** * Machine init ******************************************************************************/ @@ -698,6 +713,8 @@ static void __init z2_init(void) z2_leds_init(); z2_keys_init(); z2_pmic_init(); + + pm_power_off = z2_power_off; } MACHINE_START(ZIPIT2, "Zipit Z2") -- cgit v1.2.3 From 26407f818e62a88ac9cee64f250ec844fb079862 Mon Sep 17 00:00:00 2001 From: Tanmay Upadhyay Date: Mon, 2 May 2011 11:29:58 +0530 Subject: ARM: pxa168: Add support for UART3 PXA168 has 3 onchip UARTs. Added support for the third one Signed-off-by: Tanmay Upadhyay Signed-off-by: Eric Miao --- arch/arm/mach-mmp/include/mach/pxa168.h | 2 ++ arch/arm/mach-mmp/pxa168.c | 3 +++ 2 files changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index a52b3d2f325c..705e963574d9 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -17,6 +17,7 @@ extern void pxa168_clear_keypad_wakeup(void); extern struct pxa_device_desc pxa168_device_uart1; extern struct pxa_device_desc pxa168_device_uart2; +extern struct pxa_device_desc pxa168_device_uart3; extern struct pxa_device_desc pxa168_device_twsi0; extern struct pxa_device_desc pxa168_device_twsi1; extern struct pxa_device_desc pxa168_device_pwm1; @@ -39,6 +40,7 @@ static inline int pxa168_add_uart(int id) switch (id) { case 1: d = &pxa168_device_uart1; break; case 2: d = &pxa168_device_uart2; break; + case 3: d = &pxa168_device_uart3; break; } if (d == NULL) diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 72b4e7631583..dcb203be55d9 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -66,6 +66,7 @@ void __init pxa168_init_irq(void) /* APB peripheral clocks */ static APBC_CLK(uart1, PXA168_UART1, 1, 14745600); static APBC_CLK(uart2, PXA168_UART2, 1, 14745600); +static APBC_CLK(uart3, PXA168_UART3, 1, 14745600); static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000); static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000); static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000); @@ -86,6 +87,7 @@ static APMU_CLK(lcd, LCD, 0x7f, 312000000); static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), + INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL), INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL), INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL), INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL), @@ -149,6 +151,7 @@ void pxa168_clear_keypad_wakeup(void) /* on-chip devices */ PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22); PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24); +PXA168_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4026000, 0x30, 23, 24); PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28); PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28); PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10); -- cgit v1.2.3 From 80def0dc35886328284dfbde525815643882e730 Mon Sep 17 00:00:00 2001 From: Tanmay Upadhyay Date: Mon, 2 May 2011 11:29:59 +0530 Subject: ARM: pxa168: Add support for Ethernet Add wrapper that creates resources for PXA168 Ethernet driver Signed-off-by: Tanmay Upadhyay Signed-off-by: Eric Miao --- arch/arm/mach-mmp/include/mach/mfp-pxa168.h | 19 +++++++++++++++++++ arch/arm/mach-mmp/include/mach/pxa168.h | 6 ++++++ arch/arm/mach-mmp/include/mach/regs-apmu.h | 1 + arch/arm/mach-mmp/pxa168.c | 3 +++ 4 files changed, 29 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index 713be155a44d..8c782328b21c 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -305,4 +305,23 @@ #define GPIO112_KP_MKOUT6 MFP_CFG(GPIO112, AF7) #define GPIO121_KP_MKIN4 MFP_CFG(GPIO121, AF7) +/* Fast Ethernet */ +#define GPIO86_TX_CLK MFP_CFG(GPIO86, AF5) +#define GPIO87_TX_EN MFP_CFG(GPIO87, AF5) +#define GPIO88_TX_DQ3 MFP_CFG(GPIO88, AF5) +#define GPIO89_TX_DQ2 MFP_CFG(GPIO89, AF5) +#define GPIO90_TX_DQ1 MFP_CFG(GPIO90, AF5) +#define GPIO91_TX_DQ0 MFP_CFG(GPIO91, AF5) +#define GPIO92_MII_CRS MFP_CFG(GPIO92, AF5) +#define GPIO93_MII_COL MFP_CFG(GPIO93, AF5) +#define GPIO94_RX_CLK MFP_CFG(GPIO94, AF5) +#define GPIO95_RX_ER MFP_CFG(GPIO95, AF5) +#define GPIO96_RX_DQ3 MFP_CFG(GPIO96, AF5) +#define GPIO97_RX_DQ2 MFP_CFG(GPIO97, AF5) +#define GPIO98_RX_DQ1 MFP_CFG(GPIO98, AF5) +#define GPIO99_RX_DQ0 MFP_CFG(GPIO99, AF5) +#define GPIO100_MII_MDC MFP_CFG(GPIO100, AF5) +#define GPIO101_MII_MDIO MFP_CFG(GPIO101, AF5) +#define GPIO103_RX_DV MFP_CFG(GPIO103, AF5) + #endif /* __ASM_MACH_MFP_PXA168_H */ diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index 705e963574d9..7f005843a707 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -14,6 +14,7 @@ extern void pxa168_clear_keypad_wakeup(void); #include