From b4084bcf5ae833e049b0c428868de7e4efae2e4f Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 22 Jun 2012 15:29:28 +0200 Subject: ARM: at91/defconfig: Remove unaffected config option The commit bf4289cba02b8cf770ecd7959ca70839f0dd9d3c removed the use of CONFIG_MTD_NAND_ATMEL_ECC_NONE and CONFIG_MTD_NAND_ATMEL_ECC_HW but the Kconfig file was forgotten. This patch remove those inoperative options. Signed-off-by: Richard Genoud Signed-off-by: Nicolas Ferre --- arch/arm/configs/afeb9260_defconfig | 1 - arch/arm/configs/at91sam9263_defconfig | 1 - arch/arm/configs/qil-a9260_defconfig | 1 - arch/arm/configs/usb-a9260_defconfig | 1 - 4 files changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig index 2afdf67c2127..c285a9d777d9 100644 --- a/arch/arm/configs/afeb9260_defconfig +++ b/arch/arm/configs/afeb9260_defconfig @@ -39,7 +39,6 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_ATMEL_SSC=y diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig index 1cf96264cba1..585e7e0b0447 100644 --- a/arch/arm/configs/at91sam9263_defconfig +++ b/arch/arm/configs/at91sam9263_defconfig @@ -61,7 +61,6 @@ CONFIG_MTD_DATAFLASH=y CONFIG_MTD_BLOCK2MTD=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig index 9160f3b7751f..2bb100b5f2a7 100644 --- a/arch/arm/configs/qil-a9260_defconfig +++ b/arch/arm/configs/qil-a9260_defconfig @@ -50,7 +50,6 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y CONFIG_BLK_DEV_LOOP=y # CONFIG_MISC_DEVICES is not set CONFIG_SCSI=y diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig index 2e39f38b9627..a1501e1e1a90 100644 --- a/arch/arm/configs/usb-a9260_defconfig +++ b/arch/arm/configs/usb-a9260_defconfig @@ -49,7 +49,6 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y CONFIG_BLK_DEV_LOOP=y # CONFIG_MISC_DEVICES is not set CONFIG_SCSI=y -- cgit v1.2.3 From c1cb59fde7d1570e23d97d9b2a988760f732e28b Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Thu, 24 May 2012 16:30:29 +0200 Subject: ARM: at91: set i2c_board_info.type to "ds1339" directly The single element of the cpu9krea_i2c_devices array (of type struct i2c_board_info) has its "type" member set twice. First to "rtc-ds1307" (through the I2C_BOARD_INFO macro) and then directly to "ds1339". Just set it (once and) directly to "ds1339" instead. Signed-off-by: Paul Bolle Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/board-cpu9krea.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 69951ec7dbf3..ece0d76fd0f8 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -253,8 +253,7 @@ static struct gpio_led cpu9krea_leds[] = { static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = { { - I2C_BOARD_INFO("rtc-ds1307", 0x68), - .type = "ds1339", + I2C_BOARD_INFO("ds1339", 0x68), }, }; -- cgit v1.2.3 From 24f5c4b6e6f2933eb22979283db6174f378d9b36 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 2 Jul 2012 17:15:58 +0200 Subject: ARM: at91/defconfig: change the MCI driver to use in defconfigs Since atmel-mci driver supports all atmel mci versions, use it instead of the deprecated at91_mci driver. Signed-off-by: Nicolas Ferre --- arch/arm/configs/at91rm9200_defconfig | 2 +- arch/arm/configs/at91sam9261_defconfig | 2 +- arch/arm/configs/at91sam9263_defconfig | 2 +- arch/arm/configs/at91sam9g20_defconfig | 2 +- arch/arm/configs/at91sam9rl_defconfig | 2 +- arch/arm/configs/cpu9260_defconfig | 2 +- arch/arm/configs/cpu9g20_defconfig | 2 +- arch/arm/configs/qil-a9260_defconfig | 2 +- arch/arm/configs/stamp9g20_defconfig | 1 - 9 files changed, 8 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig index d54e2acd3ab1..4ae57a34a582 100644 --- a/arch/arm/configs/at91rm9200_defconfig +++ b/arch/arm/configs/at91rm9200_defconfig @@ -232,7 +232,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y -CONFIG_MMC_AT91=y +CONFIG_MMC_ATMELMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y diff --git a/arch/arm/configs/at91sam9261_defconfig b/arch/arm/configs/at91sam9261_defconfig index ade6b2f23116..1e8712ef062e 100644 --- a/arch/arm/configs/at91sam9261_defconfig +++ b/arch/arm/configs/at91sam9261_defconfig @@ -128,7 +128,7 @@ CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y -CONFIG_MMC_AT91=m +CONFIG_MMC_ATMELMCI=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig index 585e7e0b0447..d2050cada82d 100644 --- a/arch/arm/configs/at91sam9263_defconfig +++ b/arch/arm/configs/at91sam9263_defconfig @@ -137,7 +137,7 @@ CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_SDIO_UART=m -CONFIG_MMC_AT91=m +CONFIG_MMC_ATMELMCI=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_ATMEL_PWM=y diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig index 994d331b2319..e1b0e80b54a5 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -99,7 +99,7 @@ CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y -CONFIG_MMC_AT91=m +CONFIG_MMC_ATMELMCI=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig index ad562ee64209..7cf87856d63c 100644 --- a/arch/arm/configs/at91sam9rl_defconfig +++ b/arch/arm/configs/at91sam9rl_defconfig @@ -60,7 +60,7 @@ CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_FB=y CONFIG_FB_ATMEL=y CONFIG_MMC=y -CONFIG_MMC_AT91=m +CONFIG_MMC_ATMELMCI=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig index bbf729e2fb6f..921480c23b98 100644 --- a/arch/arm/configs/cpu9260_defconfig +++ b/arch/arm/configs/cpu9260_defconfig @@ -82,7 +82,7 @@ CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_MMC=y -CONFIG_MMC_AT91=m +CONFIG_MMC_ATMELMCI=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig index e7d7942927f3..ea116cbdffa1 100644 --- a/arch/arm/configs/cpu9g20_defconfig +++ b/arch/arm/configs/cpu9g20_defconfig @@ -82,7 +82,7 @@ CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_MMC=y -CONFIG_MMC_AT91=m +CONFIG_MMC_ATMELMCI=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig index 2bb100b5f2a7..42d5db1876ab 100644 --- a/arch/arm/configs/qil-a9260_defconfig +++ b/arch/arm/configs/qil-a9260_defconfig @@ -86,7 +86,7 @@ CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_MMC=y -CONFIG_MMC_AT91=m +CONFIG_MMC_ATMELMCI=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y diff --git a/arch/arm/configs/stamp9g20_defconfig b/arch/arm/configs/stamp9g20_defconfig index d5e260b8b160..52f1488591c7 100644 --- a/arch/arm/configs/stamp9g20_defconfig +++ b/arch/arm/configs/stamp9g20_defconfig @@ -100,7 +100,6 @@ CONFIG_USB_ETH=m CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y -# CONFIG_MMC_AT91 is not set CONFIG_MMC_ATMELMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y -- cgit v1.2.3 From 4cf3326ab5f34a333a46c59d0d3783db9cef13bf Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Mon, 21 May 2012 12:23:27 +0200 Subject: ARM: at91: add atmel-mci support for chips and boards which can use it Since atmel-mci driver supports all atmel mci versions, use it instead of the deprecated at91_mci driver. Platform data and all related configuration are removed. Signed-off-by: Ludovic Desroches [nicolas.ferre@atmel.com: remove at91_mci platform data] Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/at91rm9200_devices.c | 92 ++++++++++-------- arch/arm/mach-at91/at91sam9260_devices.c | 84 +--------------- arch/arm/mach-at91/at91sam9261_devices.c | 60 ++++++------ arch/arm/mach-at91/at91sam9263.c | 4 +- arch/arm/mach-at91/at91sam9263_devices.c | 161 ++++++++++++++++++------------- arch/arm/mach-at91/at91sam9rl_devices.c | 60 ++++++------ arch/arm/mach-at91/board-afeb-9260v1.c | 14 +-- arch/arm/mach-at91/board-carmeva.c | 14 +-- arch/arm/mach-at91/board-cpu9krea.c | 14 +-- arch/arm/mach-at91/board-cpuat91.c | 13 +-- arch/arm/mach-at91/board-csb337.c | 14 +-- arch/arm/mach-at91/board-eb9200.c | 14 +-- arch/arm/mach-at91/board-ecbat91.c | 14 +-- arch/arm/mach-at91/board-eco920.c | 14 +-- arch/arm/mach-at91/board-flexibity.c | 14 +-- arch/arm/mach-at91/board-foxg20.c | 16 +-- arch/arm/mach-at91/board-kb9202.c | 14 +-- arch/arm/mach-at91/board-neocore926.c | 13 +-- arch/arm/mach-at91/board-picotux200.c | 14 +-- arch/arm/mach-at91/board-qil-a9260.c | 14 +-- arch/arm/mach-at91/board-rm9200dk.c | 14 +-- arch/arm/mach-at91/board-rm9200ek.c | 14 +-- arch/arm/mach-at91/board-rsi-ews.c | 13 +-- arch/arm/mach-at91/board-sam9-l9260.c | 16 +-- arch/arm/mach-at91/board-sam9260ek.c | 16 +-- arch/arm/mach-at91/board-sam9261ek.c | 13 +-- arch/arm/mach-at91/board-sam9263ek.c | 13 +-- arch/arm/mach-at91/board-sam9g20ek.c | 16 +-- arch/arm/mach-at91/board-sam9rlek.c | 13 +-- arch/arm/mach-at91/board-stamp9g20.c | 14 --- arch/arm/mach-at91/board-usb-a926x.c | 2 - arch/arm/mach-at91/board-yl-9200.c | 13 +-- 32 files changed, 375 insertions(+), 439 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index e6b7d0533dd7..f6c09b8f5fc9 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -294,9 +294,9 @@ void __init at91_add_device_cf(struct at91_cf_data *data) {} * MMC / SD * -------------------------------------------------------------------- */ -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc_data; +static struct mci_platform_data mmc_data; static struct resource mmc_resources[] = { [0] = { @@ -312,7 +312,7 @@ static struct resource mmc_resources[] = { }; static struct platform_device at91rm9200_mmc_device = { - .name = "at91_mci", + .name = "atmel_mci", .id = -1, .dev = { .dma_mask = &mmc_dmamask, @@ -323,53 +323,69 @@ static struct platform_device at91rm9200_mmc_device = { .num_resources = ARRAY_SIZE(mmc_resources), }; -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) { + unsigned int i; + unsigned int slot_count = 0; + if (!data) return; - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); - - /* CLK */ - at91_set_A_periph(AT91_PIN_PA27, 0); + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { - if (data->slot_b) { - /* CMD */ - at91_set_B_periph(AT91_PIN_PA8, 1); + if (!data->slot[i].bus_width) + continue; - /* DAT0, maybe DAT1..DAT3 */ - at91_set_B_periph(AT91_PIN_PA9, 1); - if (data->wire4) { - at91_set_B_periph(AT91_PIN_PA10, 1); - at91_set_B_periph(AT91_PIN_PA11, 1); - at91_set_B_periph(AT91_PIN_PA12, 1); + /* input/irq */ + if (gpio_is_valid(data->slot[i].detect_pin)) { + at91_set_gpio_input(data->slot[i].detect_pin, 1); + at91_set_deglitch(data->slot[i].detect_pin, 1); } - } else { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA28, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA29, 1); - if (data->wire4) { - at91_set_B_periph(AT91_PIN_PB3, 1); - at91_set_B_periph(AT91_PIN_PB4, 1); - at91_set_B_periph(AT91_PIN_PB5, 1); + if (gpio_is_valid(data->slot[i].wp_pin)) + at91_set_gpio_input(data->slot[i].wp_pin, 1); + + switch (i) { + case 0: /* slot A */ + /* CMD */ + at91_set_A_periph(AT91_PIN_PA28, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA29, 1); + if (data->slot[i].bus_width == 4) { + at91_set_B_periph(AT91_PIN_PB3, 1); + at91_set_B_periph(AT91_PIN_PB4, 1); + at91_set_B_periph(AT91_PIN_PB5, 1); + } + slot_count++; + break; + case 1: /* slot B */ + /* CMD */ + at91_set_B_periph(AT91_PIN_PA8, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_B_periph(AT91_PIN_PA9, 1); + if (data->slot[i].bus_width == 4) { + at91_set_B_periph(AT91_PIN_PA10, 1); + at91_set_B_periph(AT91_PIN_PA11, 1); + at91_set_B_periph(AT91_PIN_PA12, 1); + } + slot_count++; + break; + default: + printk(KERN_ERR + "AT91: SD/MMC slot %d not available\n", i); + break; + } + if (slot_count) { + /* CLK */ + at91_set_A_periph(AT91_PIN_PA27, 0); + + mmc_data = *data; + platform_device_register(&at91rm9200_mmc_device); } } - mmc_data = *data; - platform_device_register(&at91rm9200_mmc_device); } #else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} #endif diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 0ded951f785a..95f8395f4ebb 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -208,93 +208,11 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {} #endif -/* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc_data; - -static struct resource mmc_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_MCI, - .end = AT91SAM9260_BASE_MCI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91SAM9260_ID_MCI, - .end = AT91SAM9260_ID_MCI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_mmc_device = { - .name = "at91_mci", - .id = -1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc_data, - }, - .resource = mmc_resources, - .num_resources = ARRAY_SIZE(mmc_resources), -}; - -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) -{ - if (!data) - return; - - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); - - /* CLK */ - at91_set_A_periph(AT91_PIN_PA8, 0); - - if (data->slot_b) { - /* CMD */ - at91_set_B_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_B_periph(AT91_PIN_PA0, 1); - if (data->wire4) { - at91_set_B_periph(AT91_PIN_PA5, 1); - at91_set_B_periph(AT91_PIN_PA4, 1); - at91_set_B_periph(AT91_PIN_PA3, 1); - } - } else { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA7, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA6, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA9, 1); - at91_set_A_periph(AT91_PIN_PA10, 1); - at91_set_A_periph(AT91_PIN_PA11, 1); - } - } - - mmc_data = *data; - platform_device_register(&at91sam9260_mmc_device); -} -#else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} -#endif - /* -------------------------------------------------------------------- * MMC / SD Slot for Atmel MCI Driver * -------------------------------------------------------------------- */ -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) static u64 mmc_dmamask = DMA_BIT_MASK(32); static struct mci_platform_data mmc_data; diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 9295e90b08ff..5d9d4c876a44 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -137,9 +137,9 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} * MMC / SD * -------------------------------------------------------------------- */ -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc_data; +static struct mci_platform_data mmc_data; static struct resource mmc_resources[] = { [0] = { @@ -155,7 +155,7 @@ static struct resource mmc_resources[] = { }; static struct platform_device at91sam9261_mmc_device = { - .name = "at91_mci", + .name = "atmel_mci", .id = -1, .dev = { .dma_mask = &mmc_dmamask, @@ -166,40 +166,40 @@ static struct platform_device at91sam9261_mmc_device = { .num_resources = ARRAY_SIZE(mmc_resources), }; -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) { if (!data) return; - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); - - /* CLK */ - at91_set_B_periph(AT91_PIN_PA2, 0); - - /* CMD */ - at91_set_B_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_B_periph(AT91_PIN_PA0, 1); - if (data->wire4) { - at91_set_B_periph(AT91_PIN_PA4, 1); - at91_set_B_periph(AT91_PIN_PA5, 1); - at91_set_B_periph(AT91_PIN_PA6, 1); - } + if (data->slot[0].bus_width) { + /* input/irq */ + if (gpio_is_valid(data->slot[0].detect_pin)) { + at91_set_gpio_input(data->slot[0].detect_pin, 1); + at91_set_deglitch(data->slot[0].detect_pin, 1); + } + if (gpio_is_valid(data->slot[0].wp_pin)) + at91_set_gpio_input(data->slot[0].wp_pin, 1); + + /* CLK */ + at91_set_B_periph(AT91_PIN_PA2, 0); - mmc_data = *data; - platform_device_register(&at91sam9261_mmc_device); + /* CMD */ + at91_set_B_periph(AT91_PIN_PA1, 1); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_B_periph(AT91_PIN_PA0, 1); + if (data->slot[0].bus_width == 4) { + at91_set_B_periph(AT91_PIN_PA4, 1); + at91_set_B_periph(AT91_PIN_PA5, 1); + at91_set_B_periph(AT91_PIN_PA6, 1); + } + + mmc_data = *data; + platform_device_register(&at91sam9261_mmc_device); + } } #else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} #endif diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index ed91c7e9f7c2..7ccf6d0c2427 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -187,8 +187,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_ID("hclk", &macb_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 175e0009eaa9..aa15997ec9eb 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -218,9 +218,9 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {} * MMC / SD * -------------------------------------------------------------------- */ -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc0_data, mmc1_data; +static struct mci_platform_data mmc0_data, mmc1_data; static struct resource mmc0_resources[] = { [0] = { @@ -236,7 +236,7 @@ static struct resource mmc0_resources[] = { }; static struct platform_device at91sam9263_mmc0_device = { - .name = "at91_mci", + .name = "atmel_mci", .id = 0, .dev = { .dma_mask = &mmc_dmamask, @@ -261,7 +261,7 @@ static struct resource mmc1_resources[] = { }; static struct platform_device at91sam9263_mmc1_device = { - .name = "at91_mci", + .name = "atmel_mci", .id = 1, .dev = { .dma_mask = &mmc_dmamask, @@ -272,85 +272,110 @@ static struct platform_device at91sam9263_mmc1_device = { .num_resources = ARRAY_SIZE(mmc1_resources), }; -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) { + unsigned int i; + unsigned int slot_count = 0; + if (!data) return; - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { - if (mmc_id == 0) { /* MCI0 */ - /* CLK */ - at91_set_A_periph(AT91_PIN_PA12, 0); + if (!data->slot[i].bus_width) + continue; - if (data->slot_b) { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA16, 1); + /* input/irq */ + if (gpio_is_valid(data->slot[i].detect_pin)) { + at91_set_gpio_input(data->slot[i].detect_pin, + 1); + at91_set_deglitch(data->slot[i].detect_pin, + 1); + } + if (gpio_is_valid(data->slot[i].wp_pin)) + at91_set_gpio_input(data->slot[i].wp_pin, 1); + + if (mmc_id == 0) { /* MCI0 */ + switch (i) { + case 0: /* slot A */ + /* CMD */ + at91_set_A_periph(AT91_PIN_PA1, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA0, 1); + if (data->slot[i].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA3, 1); + at91_set_A_periph(AT91_PIN_PA4, 1); + at91_set_A_periph(AT91_PIN_PA5, 1); + } + slot_count++; + break; + case 1: /* slot B */ + /* CMD */ + at91_set_A_periph(AT91_PIN_PA16, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA17, 1); + if (data->slot[i].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA18, 1); + at91_set_A_periph(AT91_PIN_PA19, 1); + at91_set_A_periph(AT91_PIN_PA20, 1); + } + slot_count++; + break; + default: + printk(KERN_ERR + "AT91: SD/MMC slot %d not available\n", i); + break; + } + if (slot_count) { + /* CLK */ + at91_set_A_periph(AT91_PIN_PA12, 0); - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA17, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA18, 1); - at91_set_A_periph(AT91_PIN_PA19, 1); - at91_set_A_periph(AT91_PIN_PA20, 1); + mmc0_data = *data; + platform_device_register(&at91sam9263_mmc0_device); } - } else { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA0, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA3, 1); - at91_set_A_periph(AT91_PIN_PA4, 1); - at91_set_A_periph(AT91_PIN_PA5, 1); + } else if (mmc_id == 1) { /* MCI1 */ + switch (i) { + case 0: /* slot A */ + /* CMD */ + at91_set_A_periph(AT91_PIN_PA7, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA8, 1); + if (data->slot[i].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA9, 1); + at91_set_A_periph(AT91_PIN_PA10, 1); + at91_set_A_periph(AT91_PIN_PA11, 1); + } + slot_count++; + break; + case 1: /* slot B */ + /* CMD */ + at91_set_A_periph(AT91_PIN_PA21, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA22, 1); + if (data->slot[i].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA23, 1); + at91_set_A_periph(AT91_PIN_PA24, 1); + at91_set_A_periph(AT91_PIN_PA25, 1); + } + slot_count++; + break; + default: + printk(KERN_ERR + "AT91: SD/MMC slot %d not available\n", i); + break; } - } + if (slot_count) { + /* CLK */ + at91_set_A_periph(AT91_PIN_PA6, 0); - mmc0_data = *data; - platform_device_register(&at91sam9263_mmc0_device); - } else { /* MCI1 */ - /* CLK */ - at91_set_A_periph(AT91_PIN_PA6, 0); - - if (data->slot_b) { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA21, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA22, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA23, 1); - at91_set_A_periph(AT91_PIN_PA24, 1); - at91_set_A_periph(AT91_PIN_PA25, 1); - } - } else { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA7, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA8, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA9, 1); - at91_set_A_periph(AT91_PIN_PA10, 1); - at91_set_A_periph(AT91_PIN_PA11, 1); + mmc1_data = *data; + platform_device_register(&at91sam9263_mmc1_device); } } - - mmc1_data = *data; - platform_device_register(&at91sam9263_mmc1_device); } } #else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} #endif /* -------------------------------------------------------------------- diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 9c0b1481a9a7..7359472f2764 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -161,9 +161,9 @@ void __init at91_add_device_usba(struct usba_platform_data *data) {} * MMC / SD * -------------------------------------------------------------------- */ -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc_data; +static struct mci_platform_data mmc_data; static struct resource mmc_resources[] = { [0] = { @@ -179,7 +179,7 @@ static struct resource mmc_resources[] = { }; static struct platform_device at91sam9rl_mmc_device = { - .name = "at91_mci", + .name = "atmel_mci", .id = -1, .dev = { .dma_mask = &mmc_dmamask, @@ -190,40 +190,40 @@ static struct platform_device at91sam9rl_mmc_device = { .num_resources = ARRAY_SIZE(mmc_resources), }; -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) { if (!data) return; - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); - - /* CLK */ - at91_set_A_periph(AT91_PIN_PA2, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA0, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA3, 1); - at91_set_A_periph(AT91_PIN_PA4, 1); - at91_set_A_periph(AT91_PIN_PA5, 1); + if (data->slot[0].bus_width) { + /* input/irq */ + if (gpio_is_valid(data->slot[0].detect_pin)) { + at91_set_gpio_input(data->slot[0].detect_pin, 1); + at91_set_deglitch(data->slot[0].detect_pin, 1); + } + if (gpio_is_valid(data->slot[0].wp_pin)) + at91_set_gpio_input(data->slot[0].wp_pin, 1); + + /* CLK */ + at91_set_A_periph(AT91_PIN_PA2, 0); + + /* CMD */ + at91_set_A_periph(AT91_PIN_PA1, 1); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA0, 1); + if (data->slot[0].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA3, 1); + at91_set_A_periph(AT91_PIN_PA4, 1); + at91_set_A_periph(AT91_PIN_PA5, 1); + } + + mmc_data = *data; + platform_device_register(&at91sam9rl_mmc_device); } - - mmc_data = *data; - platform_device_register(&at91sam9rl_mmc_device); } #else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} #endif diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index b7d8aa7b81e6..e49907c25508 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -132,12 +132,12 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = { /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata afeb9260_mmc_data = { - .det_pin = AT91_PIN_PC9, - .wp_pin = AT91_PIN_PC4, - .slot_b = 1, - .wire4 = 1, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata afeb9260_mci0_data = { + .slot[1] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PC9, + .wp_pin = AT91_PIN_PC4, + }, }; @@ -198,7 +198,7 @@ static void __init afeb9260_board_init(void) at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */ at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */ /* MMC */ - at91_add_device_mmc(0, &afeb9260_mmc_data); + at91_add_device_mci(0, &afeb9260_mci0_data); /* I2C */ at91_add_device_i2c(afeb9260_i2c_devices, ARRAY_SIZE(afeb9260_i2c_devices)); diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 44328a6d4609..99e2de74429b 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -70,12 +70,12 @@ static struct at91_udc_data __initdata carmeva_udc_data = { // .vcc_pin = -EINVAL, // }; -static struct at91_mmc_data __initdata carmeva_mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = AT91_PIN_PB10, - .wp_pin = AT91_PIN_PC14, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata carmeva_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PB10, + .wp_pin = AT91_PIN_PC14, + }, }; static struct spi_board_info carmeva_spi_devices[] = { @@ -149,7 +149,7 @@ static void __init carmeva_board_init(void) /* Compact Flash */ // at91_add_device_cf(&carmeva_cf_data); /* MMC */ - at91_add_device_mmc(0, &carmeva_mmc_data); + at91_add_device_mci(0, &carmeva_mci0_data); /* LEDs */ at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds)); } diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index ece0d76fd0f8..202c3b99fda8 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -310,12 +310,12 @@ static void __init cpu9krea_add_device_buttons(void) /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata cpu9krea_mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = AT91_PIN_PA29, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata cpu9krea_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PA29, + .wp_pin = -EINVAL, + }, }; static void __init cpu9krea_board_init(void) @@ -357,7 +357,7 @@ static void __init cpu9krea_board_init(void) /* Ethernet */ at91_add_device_eth(&cpu9krea_macb_data); /* MMC */ - at91_add_device_mmc(0, &cpu9krea_mmc_data); + at91_add_device_mci(0, &cpu9krea_mci0_data); /* I2C */ at91_add_device_i2c(cpu9krea_i2c_devices, ARRAY_SIZE(cpu9krea_i2c_devices)); diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 895cf2dba612..7f64920a41c0 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -77,11 +77,12 @@ static struct at91_udc_data __initdata cpuat91_udc_data = { .pullup_pin = AT91_PIN_PC14, }; -static struct at91_mmc_data __initdata cpuat91_mmc_data = { - .det_pin = AT91_PIN_PC2, - .wire4 = 1, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata cpuat91_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PC2, + .wp_pin = -EINVAL, + }, }; static struct physmap_flash_data cpuat91_flash_data = { @@ -167,7 +168,7 @@ static void __init cpuat91_board_init(void) /* USB Device */ at91_add_device_udc(&cpuat91_udc_data); /* MMC */ - at91_add_device_mmc(0, &cpuat91_mmc_data); + at91_add_device_mci(0, &cpuat91_mci0_data); /* I2C */ at91_add_device_i2c(NULL, 0); /* Platform devices */ diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index cd813361cd26..a17693540a15 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -86,12 +86,12 @@ static struct at91_cf_data __initdata csb337_cf_data = { .rst_pin = AT91_PIN_PD2, }; -static struct at91_mmc_data __initdata csb337_mmc_data = { - .det_pin = AT91_PIN_PD5, - .slot_b = 0, - .wire4 = 1, - .wp_pin = AT91_PIN_PD6, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata csb337_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PD5, + .wp_pin = AT91_PIN_PD6, + }, }; static struct spi_board_info csb337_spi_devices[] = { @@ -239,7 +239,7 @@ static void __init csb337_board_init(void) /* SPI */ at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices)); /* MMC */ - at91_add_device_mmc(0, &csb337_mmc_data); + at91_add_device_mci(0, &csb337_mci0_data); /* NOR flash */ platform_device_register(&csb_flash); /* LEDs */ diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index bd1017297989..d9f4f75a1c0a 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -69,12 +69,12 @@ static struct at91_cf_data __initdata eb9200_cf_data = { .rst_pin = AT91_PIN_PC5, }; -static struct at91_mmc_data __initdata eb9200_mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata eb9200_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; static struct i2c_board_info __initdata eb9200_i2c_devices[] = { @@ -112,7 +112,7 @@ static void __init eb9200_board_init(void) at91_add_device_spi(NULL, 0); /* MMC */ /* only supports 1 or 4 bit interface, not wired through to SPI */ - at91_add_device_mmc(0, &eb9200_mmc_data); + at91_add_device_mci(0, &eb9200_mci0_data); } MACHINE_START(ATEB9200, "Embest ATEB9200") diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index 89cc3726a9ce..086ec5b3ebe8 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -63,12 +63,12 @@ static struct at91_usbh_data __initdata ecb_at91usbh_data = { .overcurrent_pin= {-EINVAL, -EINVAL}, }; -static struct at91_mmc_data __initdata ecb_at91mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata ecbat91_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; @@ -160,7 +160,7 @@ static void __init ecb_at91board_init(void) at91_add_device_i2c(NULL, 0); /* MMC */ - at91_add_device_mmc(0, &ecb_at91mmc_data); + at91_add_device_mci(0, &ecbat91_mci0_data); /* SPI */ at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices)); diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 558546cf63f4..40e957d1a612 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -55,12 +55,12 @@ static struct at91_udc_data __initdata eco920_udc_data = { .pullup_pin = AT91_PIN_PB13, }; -static struct at91_mmc_data __initdata eco920_mmc_data = { - .slot_b = 0, - .wire4 = 0, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata eco920_mci0_data = { + .slot[0] = { + .bus_width = 1, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; static struct physmap_flash_data eco920_flash_data = { @@ -103,7 +103,7 @@ static void __init eco920_board_init(void) at91_add_device_usbh(&eco920_usbh_data); at91_add_device_udc(&eco920_udc_data); - at91_add_device_mmc(0, &eco920_mmc_data); + at91_add_device_mci(0, &eco920_mci0_data); platform_device_register(&eco920_flash); at91_ramc_write(0, AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1) diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 47658f78105d..23ad652edad4 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -74,12 +74,12 @@ static struct spi_board_info flexibity_spi_devices[] = { }; /* MCI (SD/MMC) */ -static struct at91_mmc_data __initdata flexibity_mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = AT91_PIN_PC9, - .wp_pin = AT91_PIN_PC4, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata flexibity_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PC9, + .wp_pin = AT91_PIN_PC4, + }, }; /* LEDs */ @@ -151,7 +151,7 @@ static void __init flexibity_board_init(void) at91_add_device_spi(flexibity_spi_devices, ARRAY_SIZE(flexibity_spi_devices)); /* MMC */ - at91_add_device_mmc(0, &flexibity_mmc_data); + at91_add_device_mci(0, &flexibity_mci0_data); /* LEDs */ at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds)); } diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index 33411e6ecb1f..0fc218160ae2 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -85,7 +85,7 @@ static struct at91_udc_data __initdata foxg20_udc_data = { * SPI devices. */ static struct spi_board_info foxg20_spi_devices[] = { -#if !defined(CONFIG_MMC_AT91) +#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) { .modalias = "mtd_dataflash", .chip_select = 1, @@ -108,12 +108,12 @@ static struct macb_platform_data __initdata foxg20_macb_data = { * MCI (SD/MMC) * det_pin, wp_pin and vcc_pin are not connected */ -static struct at91_mmc_data __initdata foxg20_mmc_data = { - .slot_b = 1, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata foxg20_mci0_data = { + .slot[1] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; @@ -246,7 +246,7 @@ static void __init foxg20_board_init(void) /* Ethernet */ at91_add_device_eth(&foxg20_macb_data); /* MMC */ - at91_add_device_mmc(0, &foxg20_mmc_data); + at91_add_device_mci(0, &foxg20_mci0_data); /* I2C */ at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices)); /* LEDs */ diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index ba39db5482b9..1fa6010ca504 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -68,12 +68,12 @@ static struct at91_udc_data __initdata kb9202_udc_data = { .pullup_pin = AT91_PIN_PB22, }; -static struct at91_mmc_data __initdata kb9202_mmc_data = { - .det_pin = AT91_PIN_PB2, - .slot_b = 0, - .wire4 = 1, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata kb9202_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PB2, + .wp_pin = -EINVAL, + }, }; static struct mtd_partition __initdata kb9202_nand_partition[] = { @@ -120,7 +120,7 @@ static void __init kb9202_board_init(void) /* USB Device */ at91_add_device_udc(&kb9202_udc_data); /* MMC */ - at91_add_device_mmc(0, &kb9202_mmc_data); + at91_add_device_mci(0, &kb9202_mci0_data); /* I2C */ at91_add_device_i2c(NULL, 0); /* SPI */ diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index d2f4cc161766..061168ee4f10 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -137,11 +137,12 @@ static struct spi_board_info neocore926_spi_devices[] = { /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata neocore926_mmc_data = { - .wire4 = 1, - .det_pin = AT91_PIN_PE18, - .wp_pin = AT91_PIN_PE19, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata neocore926_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PE18, + .wp_pin = AT91_PIN_PE19, + }, }; @@ -353,7 +354,7 @@ static void __init neocore926_board_init(void) neocore926_add_device_ts(); /* MMC */ - at91_add_device_mmc(1, &neocore926_mmc_data); + at91_add_device_mci(0, &neocore926_mci0_data); /* Ethernet */ at91_add_device_eth(&neocore926_macb_data); diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index b45c0a5d5ca7..96db6b259f86 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -61,12 +61,12 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = { .overcurrent_pin= {-EINVAL, -EINVAL}, }; -static struct at91_mmc_data __initdata picotux200_mmc_data = { - .det_pin = AT91_PIN_PB27, - .slot_b = 0, - .wire4 = 1, - .wp_pin = AT91_PIN_PA17, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata picotux200_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PB27, + .wp_pin = AT91_PIN_PA17, + }, }; #define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0 @@ -111,7 +111,7 @@ static void __init picotux200_board_init(void) at91_add_device_i2c(NULL, 0); /* MMC */ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ - at91_add_device_mmc(0, &picotux200_mmc_data); + at91_add_device_mci(0, &picotux200_mci0_data); /* NOR Flash */ platform_device_register(&picotux200_flash); } diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 0c61bf0d272c..847cc00e23df 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -155,12 +155,12 @@ static void __init ek_add_device_nand(void) /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata ek_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; /* @@ -244,7 +244,7 @@ static void __init ek_board_init(void) /* Ethernet */ at91_add_device_eth(&ek_macb_data); /* MMC */ - at91_add_device_mmc(0, &ek_mmc_data); + at91_add_device_mci(0, &ek_mci0_data); /* Push Buttons */ ek_add_device_buttons(); /* LEDs */ diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index afd7a4713766..6564c13f5e22 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -76,12 +76,12 @@ static struct at91_cf_data __initdata dk_cf_data = { }; #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD -static struct at91_mmc_data __initdata dk_mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata dk_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; #endif @@ -207,7 +207,7 @@ static void __init dk_board_init(void) #else /* MMC */ at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ - at91_add_device_mmc(0, &dk_mmc_data); + at91_add_device_mci(0, &dk_mci0_data); #endif /* NAND */ at91_add_device_nand(&dk_nand_data); diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 2b15b8adec4c..58144a0a5388 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -69,12 +69,12 @@ static struct at91_udc_data __initdata ek_udc_data = { }; #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD -static struct at91_mmc_data __initdata ek_mmc_data = { - .det_pin = AT91_PIN_PB27, - .slot_b = 0, - .wire4 = 1, - .wp_pin = AT91_PIN_PA17, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata ek_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PB27, + .wp_pin = AT91_PIN_PA17, + } }; #endif @@ -176,7 +176,7 @@ static void __init ek_board_init(void) #else /* MMC */ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ - at91_add_device_mmc(0, &ek_mmc_data); + at91_add_device_mci(0, &ek_mci0_data); #endif /* NOR Flash */ platform_device_register(&ek_flash); diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c index 24ab9be7510f..f63158f1f022 100644 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -57,11 +57,12 @@ static struct at91_usbh_data rsi_ews_usbh_data __initdata = { /* * SD/MC */ -static struct at91_mmc_data rsi_ews_mmc_data __initdata = { - .slot_b = 0, - .wire4 = 1, - .det_pin = AT91_PIN_PB27, - .wp_pin = AT91_PIN_PB29, +static struct mci_platform_data __initdata rsi_ews_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PB27, + .wp_pin = AT91_PIN_PB29, + }, }; /* @@ -214,7 +215,7 @@ static void __init rsi_ews_board_init(void) at91_add_device_spi(rsi_ews_spi_devices, ARRAY_SIZE(rsi_ews_spi_devices)); /* MMC */ - at91_add_device_mmc(0, &rsi_ews_mmc_data); + at91_add_device_mci(0, &rsi_ews_mci0_data); /* NOR Flash */ platform_device_register(&rsiews_nor_flash); /* LEDs */ diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index cdd21f2595d2..0af92e6cce64 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -72,7 +72,7 @@ static struct at91_udc_data __initdata ek_udc_data = { * SPI devices. */ static struct spi_board_info ek_spi_devices[] = { -#if !defined(CONFIG_MMC_AT91) +#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) { /* DataFlash chip */ .modalias = "mtd_dataflash", .chip_select = 1, @@ -157,12 +157,12 @@ static void __init ek_add_device_nand(void) /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .slot_b = 1, - .wire4 = 1, - .det_pin = AT91_PIN_PC8, - .wp_pin = AT91_PIN_PC4, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata ek_mci0_data = { + .slot[1] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PC8, + .wp_pin = AT91_PIN_PC4, + }, }; static void __init ek_board_init(void) @@ -193,7 +193,7 @@ static void __init ek_board_init(void) /* Ethernet */ at91_add_device_eth(&ek_macb_data); /* MMC */ - at91_add_device_mmc(0, &ek_mmc_data); + at91_add_device_mci(0, &ek_mci0_data); /* I2C */ at91_add_device_i2c(NULL, 0); } diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 7b3c3913551a..55f0104c0a4b 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -107,7 +107,7 @@ static void __init at73c213_set_clk(struct at73c213_board_info *info) {} * SPI devices. */ static struct spi_board_info ek_spi_devices[] = { -#if !defined(CONFIG_MMC_AT91) +#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) { /* DataFlash chip */ .modalias = "mtd_dataflash", .chip_select = 1, @@ -210,12 +210,12 @@ static void __init ek_add_device_nand(void) /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .slot_b = 1, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata ek_mci0_data = { + .slot[1] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; @@ -328,7 +328,7 @@ static void __init ek_board_init(void) /* Ethernet */ at91_add_device_eth(&ek_macb_data); /* MMC */ - at91_add_device_mmc(0, &ek_mmc_data); + at91_add_device_mci(0, &ek_mci0_data); /* I2C */ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); /* SSC (to AT73C213) */ diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 2736453821b0..f3b2fe24fc56 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -339,11 +339,12 @@ static struct spi_board_info ek_spi_devices[] = { * MCI (SD/MMC) * det_pin, wp_pin and vcc_pin are not connected */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; #endif /* CONFIG_SPI_ATMEL_* */ @@ -597,7 +598,7 @@ static void __init ek_board_init(void) at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX); #else /* MMC */ - at91_add_device_mmc(0, &ek_mmc_data); + at91_add_device_mci(0, &mci0_data); #endif /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 983cb98d2465..4c8d92a2ea17 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -140,11 +140,12 @@ static struct spi_board_info ek_spi_devices[] = { /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .wire4 = 1, - .det_pin = AT91_PIN_PE18, - .wp_pin = AT91_PIN_PE19, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata mci1_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PE18, + .wp_pin = AT91_PIN_PE19, + }, }; @@ -419,7 +420,7 @@ static void __init ek_board_init(void) /* Touchscreen */ ek_add_device_ts(); /* MMC */ - at91_add_device_mmc(1, &ek_mmc_data); + at91_add_device_mci(1, &mci1_data); /* Ethernet */ at91_add_device_eth(&ek_macb_data); /* NAND */ diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 6860d3451100..40d595aaed28 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -91,7 +91,7 @@ static struct at91_udc_data __initdata ek_udc_data = { * SPI devices. */ static struct spi_board_info ek_spi_devices[] = { -#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91)) +#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) { /* DataFlash chip */ .modalias = "mtd_dataflash", .chip_select = 1, @@ -198,7 +198,6 @@ static void __init ek_add_device_nand(void) * MCI (SD/MMC) * wp_pin and vcc_pin are not connected */ -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) static struct mci_platform_data __initdata ek_mmc_data = { .slot[1] = { .bus_width = 4, @@ -207,28 +206,15 @@ static struct mci_platform_data __initdata ek_mmc_data = { }, }; -#else -static struct at91_mmc_data __initdata ek_mmc_data = { - .slot_b = 1, /* Only one slot so use slot B */ - .wire4 = 1, - .det_pin = AT91_PIN_PC9, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, -}; -#endif static void __init ek_add_device_mmc(void) { -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) if (ek_have_2mmc()) { ek_mmc_data.slot[0].bus_width = 4; ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2; ek_mmc_data.slot[0].wp_pin = -1; } at91_add_device_mci(0, &ek_mmc_data); -#else - at91_add_device_mmc(0, &ek_mmc_data); -#endif } /* diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index be3239f13daa..61d2ba8a4e57 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -55,11 +55,12 @@ static struct usba_platform_data __initdata ek_usba_udc_data = { /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .wire4 = 1, - .det_pin = AT91_PIN_PA15, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PA15, + .wp_pin = -EINVAL, + }, }; @@ -302,7 +303,7 @@ static void __init ek_board_init(void) /* SPI */ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); /* MMC */ - at91_add_device_mmc(0, &ek_mmc_data); + at91_add_device_mci(0, &mci0_data); /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); /* AC97 */ diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index ee86f9d7ee72..7d890a065bb9 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -82,7 +82,6 @@ static void __init add_device_nand(void) * MCI (SD/MMC) * det_pin, wp_pin and vcc_pin are not connected */ -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) static struct mci_platform_data __initdata mmc_data = { .slot[0] = { .bus_width = 4, @@ -90,15 +89,6 @@ static struct mci_platform_data __initdata mmc_data = { .wp_pin = -1, }, }; -#else -static struct at91_mmc_data __initdata mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, -}; -#endif /* @@ -222,11 +212,7 @@ void __init stamp9g20_board_init(void) /* NAND */ add_device_nand(); /* MMC */ -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) at91_add_device_mci(0, &mmc_data); -#else - at91_add_device_mmc(0, &mmc_data); -#endif /* W1 */ add_w1(); } diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c index 95393fcaf199..c87ea80fd121 100644 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ b/arch/arm/mach-at91/board-usb-a926x.c @@ -108,14 +108,12 @@ static struct mmc_spi_platform_data at91_mmc_spi_pdata = { * SPI devices. */ static struct spi_board_info usb_a9263_spi_devices[] = { -#if !defined(CONFIG_MMC_AT91) { /* DataFlash chip */ .modalias = "mtd_dataflash", .chip_select = 0, .max_speed_hz = 15 * 1000 * 1000, .bus_num = 0, } -#endif }; static struct spi_board_info usb_a9g20_spi_devices[] = { diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index d56665ea4b55..6cb972e2f1e7 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -118,11 +118,12 @@ static struct at91_udc_data __initdata yl9200_udc_data = { /* * MMC */ -static struct at91_mmc_data __initdata yl9200_mmc_data = { - .det_pin = AT91_PIN_PB9, - .wire4 = 1, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata yl9200_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PB9, + .wp_pin = -EINVAL, + }, }; /* @@ -567,7 +568,7 @@ static void __init yl9200_board_init(void) /* I2C */ at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices)); /* MMC */ - at91_add_device_mmc(0, &yl9200_mmc_data); + at91_add_device_mci(0, &yl9200_mci0_data); /* NAND */ at91_add_device_nand(&yl9200_nand_data); /* NOR Flash */ -- cgit v1.2.3