From a29564289973a519dae0d8936d2e4c414416e2e0 Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Thu, 28 Feb 2013 04:31:55 +0000 Subject: sparc,leon: fix GRPCI2 device0 PCI config space access bus=0 slot=0 (device0) was used internally by the PCI host driver to access the PCI host controller itself, however that had the effect that PCI device0 was never accessible, which is wrong when the motherboard has connected PCI AD16 signal to a slot. A special case for accessing the PCI host controller itself is added with this patch, by setting bus to TGT. Signed-off-by: Daniel Hellstrom Signed-off-by: David S. Miller --- arch/sparc/kernel/leon_pci_grpci2.c | 41 +++++++++++++++++++++++-------------- 1 file changed, 26 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/leon_pci_grpci2.c b/arch/sparc/kernel/leon_pci_grpci2.c index fc4320886a3a..4d1487138d26 100644 --- a/arch/sparc/kernel/leon_pci_grpci2.c +++ b/arch/sparc/kernel/leon_pci_grpci2.c @@ -186,6 +186,8 @@ struct grpci2_cap_first { #define CAP9_IOMAP_OFS 0x20 #define CAP9_BARSIZE_OFS 0x24 +#define TGT 256 + struct grpci2_priv { struct leon_pci_info info; /* must be on top of this structure */ struct grpci2_regs *regs; @@ -237,8 +239,12 @@ static int grpci2_cfg_r32(struct grpci2_priv *priv, unsigned int bus, if (where & 0x3) return -EINVAL; - if (bus == 0 && PCI_SLOT(devfn) != 0) - devfn += (0x8 * 6); + if (bus == 0) { + devfn += (0x8 * 6); /* start at AD16=Device0 */ + } else if (bus == TGT) { + bus = 0; + devfn = 0; /* special case: bridge controller itself */ + } /* Select bus */ spin_lock_irqsave(&grpci2_dev_lock, flags); @@ -303,8 +309,12 @@ static int grpci2_cfg_w32(struct grpci2_priv *priv, unsigned int bus, if (where & 0x3) return -EINVAL; - if (bus == 0 && PCI_SLOT(devfn) != 0) - devfn += (0x8 * 6); + if (bus == 0) { + devfn += (0x8 * 6); /* start at AD16=Device0 */ + } else if (bus == TGT) { + bus = 0; + devfn = 0; /* special case: bridge controller itself */ + } /* Select bus */ spin_lock_irqsave(&grpci2_dev_lock, flags); @@ -368,7 +378,7 @@ static int grpci2_read_config(struct pci_bus *bus, unsigned int devfn, unsigned int busno = bus->number; int ret; - if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0)) { + if (PCI_SLOT(devfn) > 15 || busno > 255) { *val = ~0; return 0; } @@ -406,7 +416,7 @@ static int grpci2_write_config(struct pci_bus *bus, unsigned int devfn, struct grpci2_priv *priv = grpci2priv; unsigned int busno = bus->number; - if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0)) + if (PCI_SLOT(devfn) > 15 || busno > 255) return 0; #ifdef GRPCI2_DEBUG_CFGACCESS @@ -578,15 +588,15 @@ void grpci2_hw_init(struct grpci2_priv *priv) REGSTORE(regs->ahbmst_map[i], priv->pci_area); /* Get the GRPCI2 Host PCI ID */ - grpci2_cfg_r32(priv, 0, 0, PCI_VENDOR_ID, &priv->pciid); + grpci2_cfg_r32(priv, TGT, 0, PCI_VENDOR_ID, &priv->pciid); /* Get address to first (always defined) capability structure */ - grpci2_cfg_r8(priv, 0, 0, PCI_CAPABILITY_LIST, &capptr); + grpci2_cfg_r8(priv, TGT, 0, PCI_CAPABILITY_LIST, &capptr); /* Enable/Disable Byte twisting */ - grpci2_cfg_r32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, &io_map); + grpci2_cfg_r32(priv, TGT, 0, capptr+CAP9_IOMAP_OFS, &io_map); io_map = (io_map & ~0x1) | (priv->bt_enabled ? 1 : 0); - grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, io_map); + grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_IOMAP_OFS, io_map); /* Setup the Host's PCI Target BARs for other peripherals to access, * and do DMA to the host's memory. The target BARs can be sized and @@ -617,17 +627,18 @@ void grpci2_hw_init(struct grpci2_priv *priv) pciadr = 0; } } - grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BARSIZE_OFS+i*4, bar_sz); - grpci2_cfg_w32(priv, 0, 0, PCI_BASE_ADDRESS_0+i*4, pciadr); - grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BAR_OFS+i*4, ahbadr); + grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_BARSIZE_OFS+i*4, + bar_sz); + grpci2_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_0+i*4, pciadr); + grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_BAR_OFS+i*4, ahbadr); printk(KERN_INFO " TGT BAR[%d]: 0x%08x (PCI)-> 0x%08x\n", i, pciadr, ahbadr); } /* set as bus master and enable pci memory responses */ - grpci2_cfg_r32(priv, 0, 0, PCI_COMMAND, &data); + grpci2_cfg_r32(priv, TGT, 0, PCI_COMMAND, &data); data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); - grpci2_cfg_w32(priv, 0, 0, PCI_COMMAND, data); + grpci2_cfg_w32(priv, TGT, 0, PCI_COMMAND, data); /* Enable Error respone (CPU-TRAP) on illegal memory access. */ REGSTORE(regs->ctrl, CTRL_ER | CTRL_PE); -- cgit v1.2.3 From b83e831a3c2d358fea4bf8fa13f387405f2880b6 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Tue, 5 Mar 2013 11:08:47 +0900 Subject: ARM: S5PV210: Fix PL330 DMA controller clkdev entries Since the DMA controller clocks are managed at amba bus level, the PL330 device clocks handling has been removed from the driver in commit 7c71b8eb("DMA: PL330: Remove redundant runtime_suspend/ resume functions") However, this left the S5PV210 platform with only clkdev entries linking "apb_pclk" clock conn_id to a dummy clock, rather than to corresponding platform PL330 DMAC clock. As a result the DMA controller is now attempted to be used on S5PV210 with the clock disabled and the driver fails with an error: dma-pl330 dma-pl330.0: PERIPH_ID 0x0, PCELL_ID 0x0 ! dma-pl330: probe of dma-pl330.0 failed with error -22 dma-pl330 dma-pl330.1: PERIPH_ID 0x0, PCELL_ID 0x0 ! dma-pl330: probe of dma-pl330.1 failed with error -22 Fix this by adding "apb_pclk" clkdev entries for the Peripheral DMA controllers 0/1 and removing the dummy apb_pclk clock. Reported-by: Lonsn Tested-by: Lonsn Cc: Inderpal Singh Cc: Boojin Kim Signed-off-by: Sylwester Nawrocki Cc: # v3.7+ Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/clock.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index fcdf52dbcc49..f051f53e35b7 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -214,11 +214,6 @@ static struct clk clk_pcmcdclk2 = { .name = "pcmcdclk", }; -static struct clk dummy_apb_pclk = { - .name = "apb_pclk", - .id = -1, -}; - static struct clk *clkset_vpllsrc_list[] = { [0] = &clk_fin_vpll, [1] = &clk_sclk_hdmi27m, @@ -305,18 +300,6 @@ static struct clk_ops clk_fout_apll_ops = { static struct clk init_clocks_off[] = { { - .name = "dma", - .devname = "dma-pl330.0", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "dma", - .devname = "dma-pl330.1", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 4), - }, { .name = "rot", .parent = &clk_hclk_dsys.clk, .enable = s5pv210_clk_ip0_ctrl, @@ -573,6 +556,20 @@ static struct clk clk_hsmmc3 = { .ctrlbit = (1<<19), }; +static struct clk clk_pdma0 = { + .name = "pdma0", + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 3), +}; + +static struct clk clk_pdma1 = { + .name = "pdma1", + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 4), +}; + static struct clk *clkset_uart_list[] = { [6] = &clk_mout_mpll.clk, [7] = &clk_mout_epll.clk, @@ -1075,6 +1072,8 @@ static struct clk *clk_cdev[] = { &clk_hsmmc1, &clk_hsmmc2, &clk_hsmmc3, + &clk_pdma0, + &clk_pdma1, }; /* Clock initialisation code */ @@ -1333,6 +1332,8 @@ static struct clk_lookup s5pv210_clk_lookup[] = { CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), + CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0), + CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1), }; void __init s5pv210_register_clocks(void) @@ -1361,6 +1362,5 @@ void __init s5pv210_register_clocks(void) for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++) s3c_disable_clocks(clk_cdev[ptr], 1); - s3c24xx_register_clock(&dummy_apb_pclk); s3c_pwmclk_init(); } -- cgit v1.2.3 From 6551fbdfd8b85d1ab5822ac98abb4fb449bcfae0 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 28 Feb 2013 16:28:41 +0100 Subject: s390: critical section cleanup vs. machine checks The current machine check code uses the registers stored by the machine in the lowcore at __LC_GPREGS_SAVE_AREA as the registers of the interrupted context. The registers 0-7 of a user process can get clobbered if a machine checks interrupts the execution of a critical section in entry[64].S. The reason is that the critical section cleanup code may need to modify the PSW and the registers for the previous context to get to the end of a critical section. If registers 0-7 have to be replaced the relevant copy will be in the registers, which invalidates the copy in the lowcore. The machine check handler needs to explicitly store registers 0-7 to the stack. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/entry.S | 3 ++- arch/s390/kernel/entry64.S | 5 +++-- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 550228523267..94feff7d6132 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -636,7 +636,8 @@ ENTRY(mcck_int_handler) UPDATE_VTIME %r14,%r15,__LC_MCCK_ENTER_TIMER mcck_skip: SWITCH_ASYNC __LC_GPREGS_SAVE_AREA+32,__LC_PANIC_STACK,PAGE_SHIFT - mvc __PT_R0(64,%r11),__LC_GPREGS_SAVE_AREA + stm %r0,%r7,__PT_R0(%r11) + mvc __PT_R8(32,%r11),__LC_GPREGS_SAVE_AREA+32 stm %r8,%r9,__PT_PSW(%r11) xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) l %r1,BASED(.Ldo_machine_check) diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 9c837c101297..2e6d60c55f90 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -678,8 +678,9 @@ ENTRY(mcck_int_handler) UPDATE_VTIME %r14,__LC_MCCK_ENTER_TIMER LAST_BREAK %r14 mcck_skip: - lghi %r14,__LC_GPREGS_SAVE_AREA - mvc __PT_R0(128,%r11),0(%r14) + lghi %r14,__LC_GPREGS_SAVE_AREA+64 + stmg %r0,%r7,__PT_R0(%r11) + mvc __PT_R8(64,%r11),0(%r14) stmg %r8,%r9,__PT_PSW(%r11) xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) lgr %r2,%r11 # pass pointer to pt_regs -- cgit v1.2.3 From a7bb1ae749e8051434e54936dcefd37ef1cfa753 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 28 Feb 2013 11:16:26 +0100 Subject: s390/mm: fix vmemmap size calculation The size of the vmemmap must be a multiple of PAGES_PER_SECTION, since the common code always initializes the vmemmap in such pieces. So we must round up in order to not have a too small vmemmap. Fixes an IPL crash on 31 bit with more than 1920MB. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/setup.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index a5360de85ec7..29268859d8ee 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -571,6 +571,8 @@ static void __init setup_memory_end(void) /* Split remaining virtual space between 1:1 mapping & vmemmap array */ tmp = VMALLOC_START / (PAGE_SIZE + sizeof(struct page)); + /* vmemmap contains a multiple of PAGES_PER_SECTION struct pages */ + tmp = SECTION_ALIGN_UP(tmp); tmp = VMALLOC_START - tmp * sizeof(struct page); tmp &= ~((vmax >> 11) - 1); /* align to page table level */ tmp = min(tmp, 1UL << MAX_PHYSMEM_BITS); -- cgit v1.2.3 From f6a70a07079518280022286a1dceb797d12e1edf Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 4 Mar 2013 14:14:11 +0100 Subject: s390/mm: fix flush_tlb_kernel_range() Our flush_tlb_kernel_range() implementation calls __tlb_flush_mm() with &init_mm as argument. __tlb_flush_mm() however will only flush tlbs for the passed in mm if its mm_cpumask is not empty. For the init_mm however its mm_cpumask has never any bits set. Which in turn means that our flush_tlb_kernel_range() implementation doesn't work at all. This can be easily verified with a vmalloc/vfree loop which allocates a page, writes to it and then frees the page again. A crash will follow almost instantly. To fix this remove the cpumask_empty() check in __tlb_flush_mm() since there shouldn't be too many mms with a zero mm_cpumask, besides the init_mm of course. Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/tlbflush.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h index 1d8fe2b17ef6..6b32af30878c 100644 --- a/arch/s390/include/asm/tlbflush.h +++ b/arch/s390/include/asm/tlbflush.h @@ -74,8 +74,6 @@ static inline void __tlb_flush_idte(unsigned long asce) static inline void __tlb_flush_mm(struct mm_struct * mm) { - if (unlikely(cpumask_empty(mm_cpumask(mm)))) - return; /* * If the machine has IDTE we prefer to do a per mm flush * on all cpus instead of doing a local flush if the mm -- cgit v1.2.3 From 0a96d4d36978c8aeebf5fce1f3041c2d60f23ac0 Mon Sep 17 00:00:00 2001 From: Padmavathi Venna Date: Thu, 7 Mar 2013 10:33:07 +0900 Subject: ARM: EXYNOS: Add #dma-cells for generic dma binding support for PL330 This patch adds #dma-cells property to PL330 DMA controller nodes for supporting generic dma dt bindings on samsung exynos platforms. #dma-channels and #dma-requests are not required now but added in advance. Signed-off-by: Padmavathi Venna Acked-by: Arnd Bergmann Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4.dtsi | 9 +++++++++ arch/arm/boot/dts/exynos5440.dtsi | 6 ++++++ 2 files changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index e1347fceb5bc..1a62bcf18aa3 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -275,18 +275,27 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x12680000 0x1000>; interrupts = <0 35 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; pdma1: pdma@12690000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12690000 0x1000>; interrupts = <0 36 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; mdma1: mdma@12850000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12850000 0x1000>; interrupts = <0 34 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 5f3562ad6746..9a99755920c0 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -142,12 +142,18 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x120000 0x1000>; interrupts = <0 34 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; pdma1: pdma@121B0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121000 0x1000>; interrupts = <0 35 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; }; -- cgit v1.2.3 From 93481c90200c50c7874b6a773acc87095ee3907d Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 28 Feb 2013 12:07:38 +0100 Subject: s390/scm_drv: extend notify callback Extend the notify callback of scm_driver by an event parameter to allow to distinguish between different notifications. Reviewed-by: Peter Oberparleiter Signed-off-by: Sebastian Ott Signed-off-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/eadm.h | 4 +++- drivers/s390/block/scm_drv.c | 16 ++++++++++------ drivers/s390/cio/scm.c | 2 +- 3 files changed, 14 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/eadm.h b/arch/s390/include/asm/eadm.h index 8d4847191ecc..a4a1ea49003e 100644 --- a/arch/s390/include/asm/eadm.h +++ b/arch/s390/include/asm/eadm.h @@ -96,11 +96,13 @@ struct scm_device { #define OP_STATE_TEMP_ERR 2 #define OP_STATE_PERM_ERR 3 +enum scm_event {SCM_CHANGE}; + struct scm_driver { struct device_driver drv; int (*probe) (struct scm_device *scmdev); int (*remove) (struct scm_device *scmdev); - void (*notify) (struct scm_device *scmdev); + void (*notify) (struct scm_device *scmdev, enum scm_event event); void (*handler) (struct scm_device *scmdev, void *data, int error); }; diff --git a/drivers/s390/block/scm_drv.c b/drivers/s390/block/scm_drv.c index 9fa0a908607b..ff8558c4fe25 100644 --- a/drivers/s390/block/scm_drv.c +++ b/drivers/s390/block/scm_drv.c @@ -13,12 +13,16 @@ #include #include "scm_blk.h" -static void notify(struct scm_device *scmdev) +static void scm_notify(struct scm_device *scmdev, enum scm_event event) { - pr_info("%lu: The capabilities of the SCM increment changed\n", - (unsigned long) scmdev->address); - SCM_LOG(2, "State changed"); - SCM_LOG_STATE(2, scmdev); + switch (event) { + case SCM_CHANGE: + pr_info("%lu: The capabilities of the SCM increment changed\n", + (unsigned long) scmdev->address); + SCM_LOG(2, "State changed"); + SCM_LOG_STATE(2, scmdev); + break; + } } static int scm_probe(struct scm_device *scmdev) @@ -64,7 +68,7 @@ static struct scm_driver scm_drv = { .name = "scm_block", .owner = THIS_MODULE, }, - .notify = notify, + .notify = scm_notify, .probe = scm_probe, .remove = scm_remove, .handler = scm_blk_irq, diff --git a/drivers/s390/cio/scm.c b/drivers/s390/cio/scm.c index bcf20f3aa51b..31ac26499979 100644 --- a/drivers/s390/cio/scm.c +++ b/drivers/s390/cio/scm.c @@ -211,7 +211,7 @@ static void scmdev_update(struct scm_device *scmdev, struct sale *sale) goto out; scmdrv = to_scm_drv(scmdev->dev.driver); if (changed && scmdrv->notify) - scmdrv->notify(scmdev); + scmdrv->notify(scmdev, SCM_CHANGE); out: device_unlock(&scmdev->dev); if (changed) -- cgit v1.2.3 From 4fa3c019640ef776e393345ed35d9ec5c51aa3c1 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 28 Feb 2013 12:07:48 +0100 Subject: s390/scm_blk: suspend writes Stop writing to scm after certain error conditions such as a concurrent firmware upgrade. Resume to normal state once scm_blk_set_available is called (due to an scm availability notification). Reviewed-by: Peter Oberparleiter Signed-off-by: Sebastian Ott Signed-off-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/eadm.h | 2 ++ drivers/s390/block/scm_blk.c | 61 ++++++++++++++++++++++++++++++++++++++++---- drivers/s390/block/scm_blk.h | 2 ++ 3 files changed, 60 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/eadm.h b/arch/s390/include/asm/eadm.h index a4a1ea49003e..78141be88b3d 100644 --- a/arch/s390/include/asm/eadm.h +++ b/arch/s390/include/asm/eadm.h @@ -34,6 +34,8 @@ struct arsb { u32 reserved[4]; } __packed; +#define EQC_WR_PROHIBIT 22 + struct msb { u8 fmt:4; u8 oc:4; diff --git a/drivers/s390/block/scm_blk.c b/drivers/s390/block/scm_blk.c index d9c7e940fa35..5ac9c935c151 100644 --- a/drivers/s390/block/scm_blk.c +++ b/drivers/s390/block/scm_blk.c @@ -135,6 +135,11 @@ static const struct block_device_operations scm_blk_devops = { .release = scm_release, }; +static bool scm_permit_request(struct scm_blk_dev *bdev, struct request *req) +{ + return rq_data_dir(req) != WRITE || bdev->state != SCM_WR_PROHIBIT; +} + static void scm_request_prepare(struct scm_request *scmrq) { struct scm_blk_dev *bdev = scmrq->bdev; @@ -222,6 +227,10 @@ static void scm_blk_request(struct request_queue *rq) if (req->cmd_type != REQ_TYPE_FS) continue; + if (!scm_permit_request(bdev, req)) { + scm_ensure_queue_restart(bdev); + return; + } scmrq = scm_request_fetch(); if (!scmrq) { SCM_LOG(5, "no request"); @@ -285,6 +294,38 @@ void scm_blk_irq(struct scm_device *scmdev, void *data, int error) tasklet_hi_schedule(&bdev->tasklet); } +static void scm_blk_handle_error(struct scm_request *scmrq) +{ + struct scm_blk_dev *bdev = scmrq->bdev; + unsigned long flags; + + if (scmrq->error != -EIO) + goto restart; + + /* For -EIO the response block is valid. */ + switch (scmrq->aob->response.eqc) { + case EQC_WR_PROHIBIT: + spin_lock_irqsave(&bdev->lock, flags); + if (bdev->state != SCM_WR_PROHIBIT) + pr_info("%lu: Write access to the SCM increment is suspended\n", + (unsigned long) bdev->scmdev->address); + bdev->state = SCM_WR_PROHIBIT; + spin_unlock_irqrestore(&bdev->lock, flags); + goto requeue; + default: + break; + } + +restart: + if (!scm_start_aob(scmrq->aob)) + return; + +requeue: + spin_lock_irqsave(&bdev->rq_lock, flags); + scm_request_requeue(scmrq); + spin_unlock_irqrestore(&bdev->rq_lock, flags); +} + static void scm_blk_tasklet(struct scm_blk_dev *bdev) { struct scm_request *scmrq; @@ -298,11 +339,8 @@ static void scm_blk_tasklet(struct scm_blk_dev *bdev) spin_unlock_irqrestore(&bdev->lock, flags); if (scmrq->error && scmrq->retries-- > 0) { - if (scm_start_aob(scmrq->aob)) { - spin_lock_irqsave(&bdev->rq_lock, flags); - scm_request_requeue(scmrq); - spin_unlock_irqrestore(&bdev->rq_lock, flags); - } + scm_blk_handle_error(scmrq); + /* Request restarted or requeued, handle next. */ spin_lock_irqsave(&bdev->lock, flags); continue; @@ -336,6 +374,7 @@ int scm_blk_dev_setup(struct scm_blk_dev *bdev, struct scm_device *scmdev) } bdev->scmdev = scmdev; + bdev->state = SCM_OPER; spin_lock_init(&bdev->rq_lock); spin_lock_init(&bdev->lock); INIT_LIST_HEAD(&bdev->finished_requests); @@ -400,6 +439,18 @@ void scm_blk_dev_cleanup(struct scm_blk_dev *bdev) put_disk(bdev->gendisk); } +void scm_blk_set_available(struct scm_blk_dev *bdev) +{ + unsigned long flags; + + spin_lock_irqsave(&bdev->lock, flags); + if (bdev->state == SCM_WR_PROHIBIT) + pr_info("%lu: Write access to the SCM increment is restored\n", + (unsigned long) bdev->scmdev->address); + bdev->state = SCM_OPER; + spin_unlock_irqrestore(&bdev->lock, flags); +} + static int __init scm_blk_init(void) { int ret = -EINVAL; diff --git a/drivers/s390/block/scm_blk.h b/drivers/s390/block/scm_blk.h index 3c1ccf494647..8b387b32fd62 100644 --- a/drivers/s390/block/scm_blk.h +++ b/drivers/s390/block/scm_blk.h @@ -21,6 +21,7 @@ struct scm_blk_dev { spinlock_t rq_lock; /* guard the request queue */ spinlock_t lock; /* guard the rest of the blockdev */ atomic_t queued_reqs; + enum {SCM_OPER, SCM_WR_PROHIBIT} state; struct list_head finished_requests; #ifdef CONFIG_SCM_BLOCK_CLUSTER_WRITE struct list_head cluster_list; @@ -48,6 +49,7 @@ struct scm_request { int scm_blk_dev_setup(struct scm_blk_dev *, struct scm_device *); void scm_blk_dev_cleanup(struct scm_blk_dev *); +void scm_blk_set_available(struct scm_blk_dev *); void scm_blk_irq(struct scm_device *, void *, int); void scm_request_finish(struct scm_request *); -- cgit v1.2.3 From aebfa669d9fe77876f120d3d9a28fee240fe5a8e Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 28 Feb 2013 12:07:55 +0100 Subject: s390/scm: process availability Let the bus code process scm availability information and notify scm device drivers about the new state. Reviewed-by: Peter Oberparleiter Signed-off-by: Sebastian Ott Signed-off-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/eadm.h | 2 +- drivers/s390/block/scm_drv.c | 7 +++++++ drivers/s390/cio/chsc.c | 17 +++++++++++++++++ drivers/s390/cio/chsc.h | 2 ++ drivers/s390/cio/scm.c | 16 ++++++++++++++++ 5 files changed, 43 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/include/asm/eadm.h b/arch/s390/include/asm/eadm.h index 78141be88b3d..dc9200ca32ed 100644 --- a/arch/s390/include/asm/eadm.h +++ b/arch/s390/include/asm/eadm.h @@ -98,7 +98,7 @@ struct scm_device { #define OP_STATE_TEMP_ERR 2 #define OP_STATE_PERM_ERR 3 -enum scm_event {SCM_CHANGE}; +enum scm_event {SCM_CHANGE, SCM_AVAIL}; struct scm_driver { struct device_driver drv; diff --git a/drivers/s390/block/scm_drv.c b/drivers/s390/block/scm_drv.c index ff8558c4fe25..5f6180d6ff08 100644 --- a/drivers/s390/block/scm_drv.c +++ b/drivers/s390/block/scm_drv.c @@ -15,6 +15,8 @@ static void scm_notify(struct scm_device *scmdev, enum scm_event event) { + struct scm_blk_dev *bdev = dev_get_drvdata(&scmdev->dev); + switch (event) { case SCM_CHANGE: pr_info("%lu: The capabilities of the SCM increment changed\n", @@ -22,6 +24,11 @@ static void scm_notify(struct scm_device *scmdev, enum scm_event event) SCM_LOG(2, "State changed"); SCM_LOG_STATE(2, scmdev); break; + case SCM_AVAIL: + SCM_LOG(2, "Increment available"); + SCM_LOG_STATE(2, scmdev); + scm_blk_set_available(bdev); + break; } } diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c index 31ceef1beb8b..e16c553f6556 100644 --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -433,6 +433,20 @@ static void chsc_process_sei_scm_change(struct chsc_sei_nt0_area *sei_area) " failed (rc=%d).\n", ret); } +static void chsc_process_sei_scm_avail(struct chsc_sei_nt0_area *sei_area) +{ + int ret; + + CIO_CRW_EVENT(4, "chsc: scm available information\n"); + if (sei_area->rs != 7) + return; + + ret = scm_process_availability_information(); + if (ret) + CIO_CRW_EVENT(0, "chsc: process availability information" + " failed (rc=%d).\n", ret); +} + static void chsc_process_sei_nt2(struct chsc_sei_nt2_area *sei_area) { switch (sei_area->cc) { @@ -468,6 +482,9 @@ static void chsc_process_sei_nt0(struct chsc_sei_nt0_area *sei_area) case 12: /* scm change notification */ chsc_process_sei_scm_change(sei_area); break; + case 14: /* scm available notification */ + chsc_process_sei_scm_avail(sei_area); + break; default: /* other stuff */ CIO_CRW_EVENT(2, "chsc: sei nt0 unhandled cc=%d\n", sei_area->cc); diff --git a/drivers/s390/cio/chsc.h b/drivers/s390/cio/chsc.h index 227e05f674b3..349d5fc47196 100644 --- a/drivers/s390/cio/chsc.h +++ b/drivers/s390/cio/chsc.h @@ -156,8 +156,10 @@ int chsc_scm_info(struct chsc_scm_info *scm_area, u64 token); #ifdef CONFIG_SCM_BUS int scm_update_information(void); +int scm_process_availability_information(void); #else /* CONFIG_SCM_BUS */ static inline int scm_update_information(void) { return 0; } +static inline int scm_process_availability_information(void) { return 0; } #endif /* CONFIG_SCM_BUS */ diff --git a/drivers/s390/cio/scm.c b/drivers/s390/cio/scm.c index 31ac26499979..46ec25632e8b 100644 --- a/drivers/s390/cio/scm.c +++ b/drivers/s390/cio/scm.c @@ -297,6 +297,22 @@ int scm_update_information(void) return ret; } +static int scm_dev_avail(struct device *dev, void *unused) +{ + struct scm_driver *scmdrv = to_scm_drv(dev->driver); + struct scm_device *scmdev = to_scm_dev(dev); + + if (dev->driver && scmdrv->notify) + scmdrv->notify(scmdev, SCM_AVAIL); + + return 0; +} + +int scm_process_availability_information(void) +{ + return bus_for_each_dev(&scm_bus_type, NULL, NULL, scm_dev_avail); +} + static int __init scm_init(void) { int ret; -- cgit v1.2.3 From 44e9ac45754a182e8121bf137368452365d4cc4b Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 13 Feb 2013 09:45:50 +0000 Subject: ARM: shmobile: marzen: Include mmc/host.h mmc/host.h provides MMC_CAP_SD_HIGHSPEED which is used in board-marzen.c This resolves a build problem observed when compiling with "mmc: tmio: remove unused and deprecated symbols" applied. Acked-by: Guennadi Liakhovetski Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-marzen.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index cdcb799e802f..fec49ebc359a 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From 76950e6e54ccfc98a25b501dbb1bc879cce1aa29 Mon Sep 17 00:00:00 2001 From: Allen Pais Date: Tue, 5 Mar 2013 23:47:59 +0000 Subject: sparc64: correctly recognize SPARC64-X chips The following patch adds support for correctly recognizing SPARC-X chips. cpu : Unknown SUN4V CPU fpu : Unknown SUN4V FPU pmu : Unknown SUN4V PMU Signed-off-by: Katayama Yoshihiro Signed-off-by: Allen Pais Signed-off-by: David S. Miller --- arch/sparc/include/asm/spitfire.h | 1 + arch/sparc/kernel/cpu.c | 6 ++++++ arch/sparc/kernel/head_64.S | 25 +++++++++++++++++++++++-- 3 files changed, 30 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/include/asm/spitfire.h b/arch/sparc/include/asm/spitfire.h index d06a26601753..6b67e50fb9b4 100644 --- a/arch/sparc/include/asm/spitfire.h +++ b/arch/sparc/include/asm/spitfire.h @@ -45,6 +45,7 @@ #define SUN4V_CHIP_NIAGARA3 0x03 #define SUN4V_CHIP_NIAGARA4 0x04 #define SUN4V_CHIP_NIAGARA5 0x05 +#define SUN4V_CHIP_SPARC64X 0x8a #define SUN4V_CHIP_UNKNOWN 0xff #ifndef __ASSEMBLY__ diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c index a6c94a2bf9d4..5c5125895db8 100644 --- a/arch/sparc/kernel/cpu.c +++ b/arch/sparc/kernel/cpu.c @@ -493,6 +493,12 @@ static void __init sun4v_cpu_probe(void) sparc_pmu_type = "niagara5"; break; + case SUN4V_CHIP_SPARC64X: + sparc_cpu_type = "SPARC64-X"; + sparc_fpu_type = "SPARC64-X integrated FPU"; + sparc_pmu_type = "sparc64-x"; + break; + default: printk(KERN_WARNING "CPU: Unknown sun4v cpu type [%s]\n", prom_cpu_compatible); diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S index 2feb15c35d9e..26b706a1867d 100644 --- a/arch/sparc/kernel/head_64.S +++ b/arch/sparc/kernel/head_64.S @@ -134,6 +134,8 @@ prom_niagara_prefix: .asciz "SUNW,UltraSPARC-T" prom_sparc_prefix: .asciz "SPARC-" +prom_sparc64x_prefix: + .asciz "SPARC64-X" .align 4 prom_root_compatible: .skip 64 @@ -412,7 +414,7 @@ sun4v_chip_type: cmp %g2, 'T' be,pt %xcc, 70f cmp %g2, 'M' - bne,pn %xcc, 4f + bne,pn %xcc, 49f nop 70: ldub [%g1 + 7], %g2 @@ -425,7 +427,7 @@ sun4v_chip_type: cmp %g2, '5' be,pt %xcc, 5f mov SUN4V_CHIP_NIAGARA5, %g4 - ba,pt %xcc, 4f + ba,pt %xcc, 49f nop 91: sethi %hi(prom_cpu_compatible), %g1 @@ -439,6 +441,25 @@ sun4v_chip_type: mov SUN4V_CHIP_NIAGARA2, %g4 4: + /* Athena */ + sethi %hi(prom_cpu_compatible), %g1 + or %g1, %lo(prom_cpu_compatible), %g1 + sethi %hi(prom_sparc64x_prefix), %g7 + or %g7, %lo(prom_sparc64x_prefix), %g7 + mov 9, %g3 +41: ldub [%g7], %g2 + ldub [%g1], %g4 + cmp %g2, %g4 + bne,pn %icc, 49f + add %g7, 1, %g7 + subcc %g3, 1, %g3 + bne,pt %xcc, 41b + add %g1, 1, %g1 + mov SUN4V_CHIP_SPARC64X, %g4 + ba,pt %xcc, 5f + nop + +49: mov SUN4V_CHIP_UNKNOWN, %g4 5: sethi %hi(sun4v_chip_type), %g2 or %g2, %lo(sun4v_chip_type), %g2 -- cgit v1.2.3 From 1540c85b176180e5e0b312dd98db7f438baf8a24 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 7 Mar 2013 16:47:23 +0530 Subject: ARC: make allyesconfig build breakages CC drivers/mmc/host/mmc_spi.o drivers/mmc/host/mmc_spi.c:118: error: redefinition of 'struct scratch' make[3]: *** [drivers/mmc/host/mmc_spi.o] Error 1 make[2]: *** [drivers/mmc/host] Error 2 make[1]: *** [drivers/mmc] Error 2 make: *** [drivers] Error 2 CC arch/arc/kernel/kgdb.o In file included from include/linux/kgdb.h:20, from arch/arc/kernel/kgdb.c:11: /home/vineetg/arc/k.org/arc-port/arch/arc/include/asm/kgdb.h:34: warning: 'struct pt_regs' declared inside parameter list /home/vineetg/arc/k.org/arc-port/arch/arc/include/asm/kgdb.h:34: warning: its scope is only this definition or declaration, which is probably not what you want arch/arc/kernel/kgdb.c:172: error: conflicting types for 'kgdb_trap' CC arch/arc/kernel/kgdb.o arch/arc/kernel/kgdb.c: In function 'pt_regs_to_gdb_regs': arch/arc/kernel/kgdb.c:62: error: dereferencing pointer to incomplete type Signed-off-by: Vineet Gupta --- arch/arc/include/asm/kgdb.h | 6 ++---- arch/arc/include/uapi/asm/ptrace.h | 4 ++-- arch/arc/kernel/kgdb.c | 1 + 3 files changed, 5 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arc/include/asm/kgdb.h b/arch/arc/include/asm/kgdb.h index f3c4934f0ca9..4930957ca3d3 100644 --- a/arch/arc/include/asm/kgdb.h +++ b/arch/arc/include/asm/kgdb.h @@ -13,7 +13,7 @@ #ifdef CONFIG_KGDB -#include +#include /* to ensure compatibility with Linux 2.6.35, we don't implement the get/set * register API yet */ @@ -53,9 +53,7 @@ enum arc700_linux_regnums { }; #else -static inline void kgdb_trap(struct pt_regs *regs, int param) -{ -} +#define kgdb_trap(regs, param) #endif #endif /* __ARC_KGDB_H__ */ diff --git a/arch/arc/include/uapi/asm/ptrace.h b/arch/arc/include/uapi/asm/ptrace.h index 6afa4f702075..30333cec0fef 100644 --- a/arch/arc/include/uapi/asm/ptrace.h +++ b/arch/arc/include/uapi/asm/ptrace.h @@ -28,14 +28,14 @@ */ struct user_regs_struct { - struct scratch { + struct { long pad; long bta, lp_start, lp_end, lp_count; long status32, ret, blink, fp, gp; long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0; long sp; } scratch; - struct callee { + struct { long pad; long r25, r24, r23, r22, r21, r20; long r19, r18, r17, r16, r15, r14, r13; diff --git a/arch/arc/kernel/kgdb.c b/arch/arc/kernel/kgdb.c index 2888ba5be47e..52bdc83c1495 100644 --- a/arch/arc/kernel/kgdb.c +++ b/arch/arc/kernel/kgdb.c @@ -9,6 +9,7 @@ */ #include +#include #include #include -- cgit v1.2.3 From 8ff14bbc6a2083e83c6d387d025fb67ba639807c Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 6 Mar 2013 14:33:27 +0530 Subject: ARC: ABIv3: Print the correct ABI ver Signed-off-by: Vineet Gupta --- arch/arc/kernel/setup.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index dc0f968dae0a..2d95ac07df7b 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -232,10 +232,8 @@ char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len) n += scnprintf(buf + n, len - n, "\n"); -#ifdef _ASM_GENERIC_UNISTD_H n += scnprintf(buf + n, len - n, - "OS ABI [v2]\t: asm-generic/{unistd,stat,fcntl}\n"); -#endif + "OS ABI [v3]\t: no-legacy-syscalls\n"); return buf; } -- cgit v1.2.3 From 180d406e4948faee6e63781f3e062f40ec7c6fc3 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 4 Mar 2013 16:01:35 +0530 Subject: ARC: ABIv3: fork/vfork wrappers not needed in "no-legacy-syscall" ABI When switching to clone() only ABI - I missed out pruning the low level asm syscall wrappers Signed-off-by: Vineet Gupta --- arch/arc/include/asm/syscalls.h | 2 -- arch/arc/kernel/entry.S | 25 ------------------------- arch/arc/kernel/sys.c | 2 -- 3 files changed, 29 deletions(-) (limited to 'arch') diff --git a/arch/arc/include/asm/syscalls.h b/arch/arc/include/asm/syscalls.h index e53a5340ba4f..dd785befe7fd 100644 --- a/arch/arc/include/asm/syscalls.h +++ b/arch/arc/include/asm/syscalls.h @@ -16,8 +16,6 @@ #include int sys_clone_wrapper(int, int, int, int, int); -int sys_fork_wrapper(void); -int sys_vfork_wrapper(void); int sys_cacheflush(uint32_t, uint32_t uint32_t); int sys_arc_settls(void *); int sys_arc_gettls(void); diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S index ef6800ba2f03..b9d875a441cc 100644 --- a/arch/arc/kernel/entry.S +++ b/arch/arc/kernel/entry.S @@ -792,31 +792,6 @@ ARC_EXIT ret_from_fork ;################### Special Sys Call Wrappers ########################## -; TBD: call do_fork directly from here -ARC_ENTRY sys_fork_wrapper - SAVE_CALLEE_SAVED_USER - bl @sys_fork - DISCARD_CALLEE_SAVED_USER - - GET_CURR_THR_INFO_FLAGS r10 - btst r10, TIF_SYSCALL_TRACE - bnz tracesys_exit - - b ret_from_system_call -ARC_EXIT sys_fork_wrapper - -ARC_ENTRY sys_vfork_wrapper - SAVE_CALLEE_SAVED_USER - bl @sys_vfork - DISCARD_CALLEE_SAVED_USER - - GET_CURR_THR_INFO_FLAGS r10 - btst r10, TIF_SYSCALL_TRACE - bnz tracesys_exit - - b ret_from_system_call -ARC_EXIT sys_vfork_wrapper - ARC_ENTRY sys_clone_wrapper SAVE_CALLEE_SAVED_USER bl @sys_clone diff --git a/arch/arc/kernel/sys.c b/arch/arc/kernel/sys.c index f6bdd07583f3..9d6c1ca26af6 100644 --- a/arch/arc/kernel/sys.c +++ b/arch/arc/kernel/sys.c @@ -6,8 +6,6 @@ #include #define sys_clone sys_clone_wrapper -#define sys_fork sys_fork_wrapper -#define sys_vfork sys_vfork_wrapper #undef __SYSCALL #define __SYSCALL(nr, call) [nr] = (call), -- cgit v1.2.3 From 069552777a121eb39da29de4bc0383483dbe1f7e Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Tue, 5 Mar 2013 10:58:22 -0500 Subject: ARM: davinci: edma: fix dmaengine induced null pointer dereference on da830 This adds additional error checking to the private edma api implementation to catch the case where the edma_alloc_slot() has an invalid controller parameter. The edma dmaengine wrapper driver relies on this condition being handled in order to avoid setting up a second edma dmaengine instance on DA830. Verfied using a DA850 with the second EDMA controller platform instance removed to simulate a DA830 which only has a single EDMA controller. Reported-by: Tomas Novotny Signed-off-by: Matt Porter Cc: stable@vger.kernel.org # v3.7.x+ Tested-by: Tomas Novotny Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/dma.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index a685e9706b7b..45b7c71d9cc1 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -743,6 +743,9 @@ EXPORT_SYMBOL(edma_free_channel); */ int edma_alloc_slot(unsigned ctlr, int slot) { + if (!edma_cc[ctlr]) + return -EINVAL; + if (slot >= 0) slot = EDMA_CHAN_SLOT(slot); -- cgit v1.2.3 From 418df63adac56841ef6b0f1fcf435bc64d4ed177 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Tue, 12 Mar 2013 13:00:42 +0100 Subject: ARM: 7670/1: fix the memset fix Commit 455bd4c430b0 ("ARM: 7668/1: fix memset-related crashes caused by recent GCC (4.7.2) optimizations") attempted to fix a compliance issue with the memset return value. However the memset itself became broken by that patch for misaligned pointers. This fixes the above by branching over the entry code from the misaligned fixup code to avoid reloading the original pointer. Also, because the function entry alignment is wrong in the Thumb mode compilation, that fixup code is moved to the end. While at it, the entry instructions are slightly reworked to help dual issue pipelines. Signed-off-by: Nicolas Pitre Tested-by: Alexander Holler Signed-off-by: Russell King --- arch/arm/lib/memset.S | 33 +++++++++++++-------------------- 1 file changed, 13 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S index d912e7397ecc..94b0650ea98f 100644 --- a/arch/arm/lib/memset.S +++ b/arch/arm/lib/memset.S @@ -14,31 +14,15 @@ .text .align 5 - .word 0 - -1: subs r2, r2, #4 @ 1 do we have enough - blt 5f @ 1 bytes to align with? - cmp r3, #2 @ 1 - strltb r1, [ip], #1 @ 1 - strleb r1, [ip], #1 @ 1 - strb r1, [ip], #1 @ 1 - add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3)) -/* - * The pointer is now aligned and the length is adjusted. Try doing the - * memset again. - */ ENTRY(memset) -/* - * Preserve the contents of r0 for the return value. - */ - mov ip, r0 - ands r3, ip, #3 @ 1 unaligned? - bne 1b @ 1 + ands r3, r0, #3 @ 1 unaligned? + mov ip, r0 @ preserve r0 as return value + bne 6f @ 1 /* * we know that the pointer in ip is aligned to a word boundary. */ - orr r1, r1, r1, lsl #8 +1: orr r1, r1, r1, lsl #8 orr r1, r1, r1, lsl #16 mov r3, r1 cmp r2, #16 @@ -127,4 +111,13 @@ ENTRY(memset) tst r2, #1 strneb r1, [ip], #1 mov pc, lr + +6: subs r2, r2, #4 @ 1 do we have enough + blt 5b @ 1 bytes to align with? + cmp r3, #2 @ 1 + strltb r1, [ip], #1 @ 1 + strleb r1, [ip], #1 @ 1 + strb r1, [ip], #1 @ 1 + add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3)) + b 1b ENDPROC(memset) -- cgit v1.2.3 From 45549a68a592dd1daed72aaf4df2295931b93138 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Sun, 10 Mar 2013 10:15:54 +0800 Subject: ARM:net: an issue for k which is u32, never < 0 k is u32 which never < 0, need type cast, or cause issue. Signed-off-by: Chen Gang Acked-by: Russell King Acked-by: Mircea Gherzan Signed-off-by: David S. Miller --- arch/arm/net/bpf_jit_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 6828ef6ce80e..a0bd8a755bdf 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -576,7 +576,7 @@ load_ind: /* x = ((*(frame + k)) & 0xf) << 2; */ ctx->seen |= SEEN_X | SEEN_DATA | SEEN_CALL; /* the interpreter should deal with the negative K */ - if (k < 0) + if ((int)k < 0) return -1; /* offset in r1: we might have to take the slow path */ emit_mov_i(r_off, k, ctx); -- cgit v1.2.3 From 13938117a57f88a22f0df9722a5db7271fda85cd Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 13 Mar 2013 09:49:06 +1100 Subject: powerpc: Fix STAB initialization Commit f5339277eb8d3aed37f12a27988366f68ab68930 accidentally removed more than just iSeries bits and took out the call to stab_initialize() thus breaking support for POWER3 processors. Put it back. (Yes, nobody noticed until now ...) Signed-off-by: Benjamin Herrenschmidt CC: [v3.4+] --- arch/powerpc/mm/hash_utils_64.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 1b6e1271719f..6ec6c1997b3a 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -759,6 +759,8 @@ void __init early_init_mmu(void) /* Initialize stab / SLB management */ if (mmu_has_feature(MMU_FTR_SLB)) slb_initialize(); + else + stab_initialize(get_paca()->stab_real); } #ifdef CONFIG_SMP -- cgit v1.2.3 From d63ac5f6cf31c8a83170a9509b350c1489a7262b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 13 Mar 2013 09:55:02 +1100 Subject: powerpc: Fix cputable entry for 970MP rev 1.0 Commit 44ae3ab3358e962039c36ad4ae461ae9fb29596c forgot to update the entry for the 970MP rev 1.0 processor when moving some CPU features bits to the MMU feature bit mask. This breaks booting on some rare G5 models using that chip revision. Reported-by: Phileas Fogg Signed-off-by: Benjamin Herrenschmidt CC: [v3.0+] --- arch/powerpc/kernel/cputable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 75a3d71b895d..19599ef352bc 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -275,7 +275,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_features = CPU_FTRS_PPC970, .cpu_user_features = COMMON_USER_POWER4 | PPC_FEATURE_HAS_ALTIVEC_COMP, - .mmu_features = MMU_FTR_HPTE_TABLE, + .mmu_features = MMU_FTRS_PPC970, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, -- cgit v1.2.3 From ff2d7587c7b2a1b46abc7618f45b8cc3476d8716 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 11 Mar 2013 13:44:55 +0000 Subject: powerpc: Remove last traces of POWER4_ONLY The Kconfig symbol POWER4_ONLY got removed in commit 694caf0255dcab506d1e174c96a65ab65d96e108 ("powerpc: Remove CONFIG_POWER4_ONLY"). Remove its last traces. Signed-off-by: Paul Bolle Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/Kconfig.cputype | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index cea2f09c4241..18e3b76c78d7 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -124,9 +124,8 @@ config 6xx select PPC_HAVE_PMU_SUPPORT config POWER3 - bool depends on PPC64 && PPC_BOOK3S - default y if !POWER4_ONLY + def_bool y config POWER4 depends on PPC64 && PPC_BOOK3S @@ -145,8 +144,7 @@ config TUNE_CELL but somewhat slower on other machines. This option only changes the scheduling of instructions, not the selection of instructions itself, so the resulting kernel will keep running on all other - machines. When building a kernel that is supposed to run only - on Cell, you should also select the POWER4_ONLY option. + machines. # this is temp to handle compat with arch=ppc config 8xx -- cgit v1.2.3 From 1674400aaee5b466c595a8fc310488263ce888c7 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 12 Mar 2013 01:51:51 +0000 Subject: powerpc: Fix -mcmodel=medium breakage in prom_init.c Commit 5ac47f7a6efb (powerpc: Relocate prom_init.c on 64bit) made prom_init.c position independent by manually relocating its entries in the TOC. We get the address of the TOC entries with the __prom_init_toc_start linker symbol. If __prom_init_toc_start ends up as an entry in the TOC then we need to add an offset to get the current address. This is the case for older toolchains. On the other hand, if we have a newer toolchain that supports -mcmodel=medium then __prom_init_toc_start will be created by a relative offset from r2 (the TOC pointer). Since r2 has already been relocated, nothing more needs to be done. Adding an offset in this case is wrong and Aaro Koskinen and Alexander Graf have noticed noticed G5 and OpenBIOS breakage. Alan Modra suggested we just use r2 to get at the TOC which is simpler and works with both old and new toolchains. Reported-by: Alexander Graf Signed-off-by: Anton Blanchard Tested-by: Aaro Koskinen Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/prom_init.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 7f7fb7fd991b..13f8d168b3f1 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -2832,11 +2832,13 @@ static void unreloc_toc(void) { } #else -static void __reloc_toc(void *tocstart, unsigned long offset, - unsigned long nr_entries) +static void __reloc_toc(unsigned long offset, unsigned long nr_entries) { unsigned long i; - unsigned long *toc_entry = (unsigned long *)tocstart; + unsigned long *toc_entry; + + /* Get the start of the TOC by using r2 directly. */ + asm volatile("addi %0,2,-0x8000" : "=b" (toc_entry)); for (i = 0; i < nr_entries; i++) { *toc_entry = *toc_entry + offset; @@ -2850,8 +2852,7 @@ static void reloc_toc(void) unsigned long nr_entries = (__prom_init_toc_end - __prom_init_toc_start) / sizeof(long); - /* Need to add offset to get at __prom_init_toc_start */ - __reloc_toc(__prom_init_toc_start + offset, offset, nr_entries); + __reloc_toc(offset, nr_entries); mb(); } @@ -2864,8 +2865,7 @@ static void unreloc_toc(void) mb(); - /* __prom_init_toc_start has been relocated, no need to add offset */ - __reloc_toc(__prom_init_toc_start, -offset, nr_entries); + __reloc_toc(-offset, nr_entries); } #endif #endif -- cgit v1.2.3 From f04feec2501774fe20fc7c77b5a16b9e23b36f95 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Mon, 11 Mar 2013 15:12:39 +0100 Subject: ARM: at91: dt: at91sam9x5: correct NAND pins comments Comments on NAND pins where inverted. Signed-off-by: Richard Genoud Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9x5.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index aa98e641931f..9b5d0480d7ee 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -238,8 +238,8 @@ nand { pinctrl_nand: nand-0 { atmel,pins = - <3 4 0x0 0x1 /* PD5 gpio RDY pin pull_up */ - 3 5 0x0 0x1>; /* PD4 gpio enable pin pull_up */ + <3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */ + 3 5 0x0 0x1>; /* PD5 gpio RDY/BUSY pin pull_up */ }; }; -- cgit v1.2.3 From 7f06472f1c3281abceea36059f94e099bfe4698f Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Mon, 11 Mar 2013 15:12:40 +0100 Subject: ARM: at91: dt: at91sam9x5: complete NAND pinctrl There was only chip enable and readdy/busy pins for the nand controller. This add the rest of the pins. pinctrl_nand_16bits contains the specific muxes for 16 bits NANDs. Signed-off-by: Richard Genoud Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9x5.dtsi | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 9b5d0480d7ee..a98c0d50fbbe 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -238,8 +238,32 @@ nand { pinctrl_nand: nand-0 { atmel,pins = - <3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */ - 3 5 0x0 0x1>; /* PD5 gpio RDY/BUSY pin pull_up */ + <3 0 0x1 0x0 /* PD0 periph A Read Enable */ + 3 1 0x1 0x0 /* PD1 periph A Write Enable */ + 3 2 0x1 0x0 /* PD2 periph A Address Latch Enable */ + 3 3 0x1 0x0 /* PD3 periph A Command Latch Enable */ + 3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */ + 3 5 0x0 0x1 /* PD5 gpio RDY/BUSY pin pull_up */ + 3 6 0x1 0x0 /* PD6 periph A Data bit 0 */ + 3 7 0x1 0x0 /* PD7 periph A Data bit 1 */ + 3 8 0x1 0x0 /* PD8 periph A Data bit 2 */ + 3 9 0x1 0x0 /* PD9 periph A Data bit 3 */ + 3 10 0x1 0x0 /* PD10 periph A Data bit 4 */ + 3 11 0x1 0x0 /* PD11 periph A Data bit 5 */ + 3 12 0x1 0x0 /* PD12 periph A Data bit 6 */ + 3 13 0x1 0x0>; /* PD13 periph A Data bit 7 */ + }; + + pinctrl_nand_16bits: nand_16bits-0 { + atmel,pins = + <3 14 0x1 0x0 /* PD14 periph A Data bit 8 */ + 3 15 0x1 0x0 /* PD15 periph A Data bit 9 */ + 3 16 0x1 0x0 /* PD16 periph A Data bit 10 */ + 3 17 0x1 0x0 /* PD17 periph A Data bit 11 */ + 3 18 0x1 0x0 /* PD18 periph A Data bit 12 */ + 3 19 0x1 0x0 /* PD19 periph A Data bit 13 */ + 3 20 0x1 0x0 /* PD20 periph A Data bit 14 */ + 3 21 0x1 0x0>; /* PD21 periph A Data bit 15 */ }; }; -- cgit v1.2.3 From 3bf7b07ece6e00747602938f68c1db8001b9925f Mon Sep 17 00:00:00 2001 From: Sukadev Bhattiprolu Date: Tue, 5 Mar 2013 21:48:26 -0800 Subject: perf/POWER7: Create a sysfs format entry for Power7 events Create a sysfs entry, '/sys/bus/event_source/devices/cpu/format/event' which describes the format of the POWER7 PMU events. This code is based on corresponding code in x86. Changelog[v4]: [Michael Ellerman, Paul Mckerras] The event format is different for other POWER cpus. So move the code to POWER7-specific, power7-pmu.c Also, the POWER7 format uses bits 0-19 not 0-20. Changelog[v2]: [Jiri Osla] Use PMU_FORMAT_ATTR rather than duplicating code. Signed-off-by: Sukadev Bhattiprolu Acked-by: Paul Mackerras Tested-by: Michael Ellerman Cc: Andi Kleen Cc: Anton Blanchard Cc: Ingo Molnar Cc: Jiri Olsa Cc: Michael Ellerman Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Robert Richter Cc: Stephane Eranian Cc: benh@kernel.crashing.org Cc: linuxppc-dev@ozlabs.org Link: http://lkml.kernel.org/r/20130306054826.GA14627@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- arch/powerpc/perf/power7-pmu.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c index b554879bd31e..3c475d6267c7 100644 --- a/arch/powerpc/perf/power7-pmu.c +++ b/arch/powerpc/perf/power7-pmu.c @@ -420,7 +420,20 @@ static struct attribute_group power7_pmu_events_group = { .attrs = power7_events_attr, }; +PMU_FORMAT_ATTR(event, "config:0-19"); + +static struct attribute *power7_pmu_format_attr[] = { + &format_attr_event.attr, + NULL, +}; + +struct attribute_group power7_pmu_format_group = { + .name = "format", + .attrs = power7_pmu_format_attr, +}; + static const struct attribute_group *power7_pmu_attr_groups[] = { + &power7_pmu_format_group, &power7_pmu_events_group, NULL, }; -- cgit v1.2.3 From 647f8d94a4e69d39e88a617846755655853c20f5 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Fri, 8 Mar 2013 16:18:21 +0100 Subject: ARM: at91: add gpio suspend/resume support when using pinctrl gpio suspend/resume and wakeup sources where not managed when using pinctrl so it was impossible to wake up the system with a gpio. Signed-off-by: Ludovic Desroches Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Linus Walleij Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/include/mach/gpio.h | 8 +++++ arch/arm/mach-at91/pm.c | 10 ++++-- drivers/pinctrl/pinctrl-at91.c | 61 +++++++++++++++++++++++++++++++++- 3 files changed, 76 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index eed465ab0dd7..5fc23771c154 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -209,6 +209,14 @@ extern int at91_get_gpio_value(unsigned pin); extern void at91_gpio_suspend(void); extern void at91_gpio_resume(void); +#ifdef CONFIG_PINCTRL_AT91 +extern void at91_pinctrl_gpio_suspend(void); +extern void at91_pinctrl_gpio_resume(void); +#else +static inline void at91_pinctrl_gpio_suspend(void) {} +static inline void at91_pinctrl_gpio_resume(void) {} +#endif + #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index adb6db888a1f..73f1f250403a 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -201,7 +201,10 @@ extern u32 at91_slow_clock_sz; static int at91_pm_enter(suspend_state_t state) { - at91_gpio_suspend(); + if (of_have_populated_dt()) + at91_pinctrl_gpio_suspend(); + else + at91_gpio_suspend(); at91_irq_suspend(); pr_debug("AT91: PM - wake mask %08x, pm state %d\n", @@ -286,7 +289,10 @@ static int at91_pm_enter(suspend_state_t state) error: target_state = PM_SUSPEND_ON; at91_irq_resume(); - at91_gpio_resume(); + if (of_have_populated_dt()) + at91_pinctrl_gpio_resume(); + else + at91_gpio_resume(); return 0; } diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index 75933a6aa828..efb7f10e902a 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -1277,21 +1277,80 @@ static int alt_gpio_irq_type(struct irq_data *d, unsigned type) } #ifdef CONFIG_PM + +static u32 wakeups[MAX_GPIO_BANKS]; +static u32 backups[MAX_GPIO_BANKS]; + static int gpio_irq_set_wake(struct irq_data *d, unsigned state) { struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); unsigned bank = at91_gpio->pioc_idx; + unsigned mask = 1 << d->hwirq; if (unlikely(bank >= MAX_GPIO_BANKS)) return -EINVAL; + if (state) + wakeups[bank] |= mask; + else + wakeups[bank] &= ~mask; + irq_set_irq_wake(at91_gpio->pioc_virq, state); return 0; } + +void at91_pinctrl_gpio_suspend(void) +{ + int i; + + for (i = 0; i < gpio_banks; i++) { + void __iomem *pio; + + if (!gpio_chips[i]) + continue; + + pio = gpio_chips[i]->regbase; + + backups[i] = __raw_readl(pio + PIO_IMR); + __raw_writel(backups[i], pio + PIO_IDR); + __raw_writel(wakeups[i], pio + PIO_IER); + + if (!wakeups[i]) { + clk_unprepare(gpio_chips[i]->clock); + clk_disable(gpio_chips[i]->clock); + } else { + printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", + 'A'+i, wakeups[i]); + } + } +} + +void at91_pinctrl_gpio_resume(void) +{ + int i; + + for (i = 0; i < gpio_banks; i++) { + void __iomem *pio; + + if (!gpio_chips[i]) + continue; + + pio = gpio_chips[i]->regbase; + + if (!wakeups[i]) { + if (clk_prepare(gpio_chips[i]->clock) == 0) + clk_enable(gpio_chips[i]->clock); + } + + __raw_writel(wakeups[i], pio + PIO_IDR); + __raw_writel(backups[i], pio + PIO_IER); + } +} + #else #define gpio_irq_set_wake NULL -#endif +#endif /* CONFIG_PM */ static struct irq_chip gpio_irqchip = { .name = "GPIO", -- cgit v1.2.3 From 0ed66befaae893e82c9f016238282d73ef9fd6c7 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Fri, 8 Mar 2013 16:13:57 +0100 Subject: ARM: at91: fix infinite loop in at91_irq_suspend/resume Fix an infinite loop when suspending or resuming a device with AIC5. Signed-off-by: Ludovic Desroches Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/irq.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index 8e210262aeee..e0ca59171022 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -92,23 +92,21 @@ static int at91_aic_set_wake(struct irq_data *d, unsigned value) void at91_irq_suspend(void) { - int i = 0, bit; + int bit = -1; if (has_aic5()) { /* disable enabled irqs */ - while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) { + while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) { at91_aic_write(AT91_AIC5_SSR, bit & AT91_AIC5_INTSEL_MSK); at91_aic_write(AT91_AIC5_IDCR, 1); - i = bit; } /* enable wakeup irqs */ - i = 0; - while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) { + bit = -1; + while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) { at91_aic_write(AT91_AIC5_SSR, bit & AT91_AIC5_INTSEL_MSK); at91_aic_write(AT91_AIC5_IECR, 1); - i = bit; } } else { at91_aic_write(AT91_AIC_IDCR, *backups); @@ -118,23 +116,21 @@ void at91_irq_suspend(void) void at91_irq_resume(void) { - int i = 0, bit; + int bit = -1; if (has_aic5()) { /* disable wakeup irqs */ - while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) { + while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) { at91_aic_write(AT91_AIC5_SSR, bit & AT91_AIC5_INTSEL_MSK); at91_aic_write(AT91_AIC5_IDCR, 1); - i = bit; } /* enable irqs disabled for suspend */ - i = 0; - while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) { + bit = -1; + while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) { at91_aic_write(AT91_AIC5_SSR, bit & AT91_AIC5_INTSEL_MSK); at91_aic_write(AT91_AIC5_IECR, 1); - i = bit; } } else { at91_aic_write(AT91_AIC_IDCR, *wakeups); -- cgit v1.2.3 From 42b84328428bfe305fcb60eb382fba60cee9071f Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 14 Mar 2013 12:52:05 +0100 Subject: ARM: i.MX25: Fix DT compilation The i.MX25 DT machine descriptor calls a non existing imx25_timer_init() function. This patch adds it to fix compilation. Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/imx25-dt.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c index 03b65e5ea541..82348391582a 100644 --- a/arch/arm/mach-imx/imx25-dt.c +++ b/arch/arm/mach-imx/imx25-dt.c @@ -27,6 +27,11 @@ static const char * const imx25_dt_board_compat[] __initconst = { NULL }; +static void __init imx25_timer_init(void) +{ + mx25_clocks_init_dt(); +} + DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") .map_io = mx25_map_io, .init_early = imx25_init_early, -- cgit v1.2.3 From 01ffe957e2f0340a13fd40a6577d029f252ad7c7 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 14 Feb 2013 23:11:33 +0100 Subject: [media] s5p-fimc: fix s5pv210 build 56bc911 "[media] s5p-fimc: Redefine platform data structure for fimc-is" changed the bus_type member of struct fimc_source_info treewide, but got one instance wrong in mach-s5pv210, which was evidently not even build tested. This adds the missing change to get s5pv210_defconfig to build again. Applies on the Mauro's media tree. Signed-off-by: Arnd Bergmann Cc: Sylwester Nawrocki Cc: Kyungmin Park Cc: Kukjin Kim Cc: Mauro Carvalho Chehab --- arch/arm/mach-s5pv210/mach-goni.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 3a38f7b34b94..e373de44a8b6 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -845,7 +845,7 @@ static struct fimc_source_info goni_camera_sensors[] = { .mux_id = 0, .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_VSYNC_ACTIVE_LOW, - .bus_type = FIMC_BUS_TYPE_ITU_601, + .fimc_bus_type = FIMC_BUS_TYPE_ITU_601, .board_info = &noon010pc30_board_info, .i2c_bus_num = 0, .clk_frequency = 16000000UL, -- cgit v1.2.3 From e71dc5f787f3908b8b8158103fc7d74a78a22cd1 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Fri, 15 Mar 2013 16:27:53 +0800 Subject: ARM: mmp: add platform_device head file in gplugd MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit arch/arm/mach-mmp/gplugd.c: In function ‘gplugd_init’: arch/arm/mach-mmp/gplugd.c:188:2: error: implicit declaration of function ‘platform_device_register’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[1]: *** [arch/arm/mach-mmp/gplugd.o] Error 1 make: *** [arch/arm/mach-mmp] Error 2 So append platform_device.h to resolve build issue. Signed-off-by: Haojian Zhuang --- arch/arm/mach-mmp/gplugd.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index d1e2d595e79c..f62b68d926f4 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -9,6 +9,7 @@ */ #include +#include #include #include -- cgit v1.2.3 From 8dda05ccd8a227e2b56ce6b26d52b1af88437f9e Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 4 Mar 2013 15:19:19 -0800 Subject: ARM: Scorpion is a v7 architecture, not v6 Scorpion processors have always been v7 CPUs. Fix the Kconfig text to reflect this. Reported-by: Stepan Moskovchenko Signed-off-by: Stephen Boyd Signed-off-by: Arnd Bergmann --- arch/arm/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9c87fd8ed9eb..ca1b6fd94a3f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1005,12 +1005,12 @@ config ARCH_MULTI_V4_V5 bool config ARCH_MULTI_V6 - bool "ARMv6 based platforms (ARM11, Scorpion, ...)" + bool "ARMv6 based platforms (ARM11)" select ARCH_MULTI_V6_V7 select CPU_V6 config ARCH_MULTI_V7 - bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)" + bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" default y select ARCH_MULTI_V6_V7 select ARCH_VEXPRESS -- cgit v1.2.3 From 5dc2eb7da1e387e31ce54f54af580c6a6f512ca6 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 26 Feb 2013 10:55:18 +0100 Subject: ARM: i.MX35: enable MAX clock The i.MX35 has two bits per clock gate which are decoded as follows: 0b00 -> clock off 0b01 -> clock is on in run mode, off in wait/doze 0b10 -> clock is on in run/wait mode, off in doze 0b11 -> clock is always on The reset value for the MAX clock is 0b10. The MAX clock is needed by the SoC, yet unused in the Kernel, so the common clock framework will disable it during late init time. It will only disable clocks though which it detects as being turned on. This detection is made depending on the lower bit of the gate. If the reset value has been altered by the bootloader to 0b11 the clock framework will detect the clock as turned on, yet unused, hence it will turn it off and the system locks up. This patch turns the MAX clock on unconditionally making the Kernel independent of the bootloader. Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/clk-imx35.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index 74e3a34d78b8..e13a8fa5e62c 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -264,6 +264,7 @@ int __init mx35_clocks_init(void) clk_prepare_enable(clk[gpio3_gate]); clk_prepare_enable(clk[iim_gate]); clk_prepare_enable(clk[emi_gate]); + clk_prepare_enable(clk[max_gate]); /* * SCC is needed to boot via mmc after a watchdog reset. The clock code -- cgit v1.2.3 From f7db706b132f11c79ae1d74b2382e0926cf31644 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 14 Mar 2013 10:03:03 +0100 Subject: ARM: 7674/1: smp: Avoid dummy clockevent being preferred over real hardware clock-event With recent arm broadcast time clean-up from Mark Rutland, the dummy broadcast device is always registered with timer subsystem. And since the rating of the dummy clock event is very high, it may be preferred over a real clock event. This is a change in behavior from past and not an intended one. So reduce the rating of the dummy clock-event so that real clock-event device is selected when available. Acked-by: Thomas Gleixner Acked-by: Mark Rutland Signed-off-by: Santosh Shilimkar Signed-off-by: Russell King --- arch/arm/kernel/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 31644f1978d5..79078edbb9bc 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -480,7 +480,7 @@ static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt) evt->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_DUMMY; - evt->rating = 400; + evt->rating = 100; evt->mult = 1; evt->set_mode = broadcast_timer_set_mode; -- cgit v1.2.3 From 2bb78efab42cf4ee7a7184f7d2da1b7cb331b479 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 11 Mar 2013 16:42:49 +0000 Subject: powerpc/ptrace: Fix brk.len used uninitialised With some CONFIGS it's possible that in ppc_set_hwdebug, brk.len is uninitialised before being used. It has been reported that GCC 4.2 will produce the following error in this case: arch/powerpc/kernel/ptrace.c:1479: warning: 'brk.len' is used uninitialized in this function arch/powerpc/kernel/ptrace.c:1381: note: 'brk.len' was declared here This patch corrects this. Signed-off-by: Michael Neuling Reported-by: Philippe De Muyter Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/ptrace.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 245c1b6a0858..f9b30c68ba47 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -1428,6 +1428,7 @@ static long ppc_set_hwdebug(struct task_struct *child, brk.address = bp_info->addr & ~7UL; brk.type = HW_BRK_TYPE_TRANSLATE; + brk.len = 8; if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ) brk.type |= HW_BRK_TYPE_READ; if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) -- cgit v1.2.3 From d812c0e1f90b7b86ff8e06b500cd8b8a03f3dbe6 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 6 Mar 2013 18:11:51 +0000 Subject: powerpc: Make sure that we alays include CONFIG_BINFMT_ELF Our kernel is not much good without BINFMT_ELF and this fixes a build warning on 64 bit allnoconfig builds: warning: (COMPAT) selects COMPAT_BINFMT_ELF which has unmet direct dependencies (COMPAT && BINFMT_ELF) Signed-off-by: Stephen Rothwell Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index b89d7eb730a2..a091c01762ed 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -90,6 +90,7 @@ config GENERIC_GPIO config PPC bool default y + select BINFMT_ELF select OF select OF_EARLY_FLATTREE select HAVE_FTRACE_MCOUNT_RECORD -- cgit v1.2.3 From e39d1a471484662620651cd9520250d33843f235 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Wed, 13 Mar 2013 03:34:53 +0000 Subject: powerpc: Make VSID_BITS* dependency explicit VSID_BITS and VSID_BITS_1T depends on the context bits and user esid bits. Make the dependency explicit Acked-by: Paul Mackerras Signed-off-by: Aneesh Kumar K.V Signed-off-by: Benjamin Herrenschmidt CC: [v3.8] --- arch/powerpc/include/asm/mmu-hash64.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h index 2fdb47a19efd..5f8c2bd58818 100644 --- a/arch/powerpc/include/asm/mmu-hash64.h +++ b/arch/powerpc/include/asm/mmu-hash64.h @@ -381,21 +381,22 @@ extern void slb_set_size(u16 size); * hash collisions. */ +#define CONTEXT_BITS 19 +#define USER_ESID_BITS 18 +#define USER_ESID_BITS_1T 6 + /* * This should be computed such that protovosid * vsid_mulitplier * doesn't overflow 64 bits. It should also be co-prime to vsid_modulus */ #define VSID_MULTIPLIER_256M ASM_CONST(12538073) /* 24-bit prime */ -#define VSID_BITS_256M 38 +#define VSID_BITS_256M (CONTEXT_BITS + USER_ESID_BITS + 1) #define VSID_MODULUS_256M ((1UL< Date: Wed, 13 Mar 2013 03:34:54 +0000 Subject: powerpc: Update kernel VSID range This patch change the kernel VSID range so that we limit VSID_BITS to 37. This enables us to support 64TB with 65 bit VA (37+28). Without this patch we have boot hangs on platforms that only support 65 bit VA. With this patch we now have proto vsid generated as below: We first generate a 37-bit "proto-VSID". Proto-VSIDs are generated from mmu context id and effective segment id of the address. For user processes max context id is limited to ((1ul << 19) - 5) for kernel space, we use the top 4 context ids to map address as below 0x7fffc - [ 0xc000000000000000 - 0xc0003fffffffffff ] 0x7fffd - [ 0xd000000000000000 - 0xd0003fffffffffff ] 0x7fffe - [ 0xe000000000000000 - 0xe0003fffffffffff ] 0x7ffff - [ 0xf000000000000000 - 0xf0003fffffffffff ] Acked-by: Paul Mackerras Signed-off-by: Aneesh Kumar K.V Tested-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt CC: [v3.8] --- arch/powerpc/include/asm/mmu-hash64.h | 115 +++++++++++++++++----------------- arch/powerpc/kernel/exceptions-64s.S | 34 +++++++--- arch/powerpc/mm/hash_utils_64.c | 20 ++++-- arch/powerpc/mm/mmu_context_hash64.c | 11 +--- arch/powerpc/mm/slb_low.S | 50 +++++++-------- arch/powerpc/mm/tlb_hash64.c | 2 +- 6 files changed, 126 insertions(+), 106 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h index 5f8c2bd58818..a32461f9d825 100644 --- a/arch/powerpc/include/asm/mmu-hash64.h +++ b/arch/powerpc/include/asm/mmu-hash64.h @@ -343,17 +343,16 @@ extern void slb_set_size(u16 size); /* * VSID allocation (256MB segment) * - * We first generate a 38-bit "proto-VSID". For kernel addresses this - * is equal to the ESID | 1 << 37, for user addresses it is: - * (context << USER_ESID_BITS) | (esid & ((1U << USER_ESID_BITS) - 1) + * We first generate a 37-bit "proto-VSID". Proto-VSIDs are generated + * from mmu context id and effective segment id of the address. * - * This splits the proto-VSID into the below range - * 0 - (2^(CONTEXT_BITS + USER_ESID_BITS) - 1) : User proto-VSID range - * 2^(CONTEXT_BITS + USER_ESID_BITS) - 2^(VSID_BITS) : Kernel proto-VSID range - * - * We also have CONTEXT_BITS + USER_ESID_BITS = VSID_BITS - 1 - * That is, we assign half of the space to user processes and half - * to the kernel. + * For user processes max context id is limited to ((1ul << 19) - 5) + * for kernel space, we use the top 4 context ids to map address as below + * NOTE: each context only support 64TB now. + * 0x7fffc - [ 0xc000000000000000 - 0xc0003fffffffffff ] + * 0x7fffd - [ 0xd000000000000000 - 0xd0003fffffffffff ] + * 0x7fffe - [ 0xe000000000000000 - 0xe0003fffffffffff ] + * 0x7ffff - [ 0xf000000000000000 - 0xf0003fffffffffff ] * * The proto-VSIDs are then scrambled into real VSIDs with the * multiplicative hash: @@ -363,38 +362,45 @@ extern void slb_set_size(u16 size); * VSID_MULTIPLIER is prime, so in particular it is * co-prime to VSID_MODULUS, making this a 1:1 scrambling function. * Because the modulus is 2^n-1 we can compute it efficiently without - * a divide or extra multiply (see below). - * - * This scheme has several advantages over older methods: + * a divide or extra multiply (see below). The scramble function gives + * robust scattering in the hash table (at least based on some initial + * results). * - * - We have VSIDs allocated for every kernel address - * (i.e. everything above 0xC000000000000000), except the very top - * segment, which simplifies several things. + * We also consider VSID 0 special. We use VSID 0 for slb entries mapping + * bad address. This enables us to consolidate bad address handling in + * hash_page. * - * - We allow for USER_ESID_BITS significant bits of ESID and - * CONTEXT_BITS bits of context for user addresses. - * i.e. 64T (46 bits) of address space for up to half a million contexts. - * - * - The scramble function gives robust scattering in the hash - * table (at least based on some initial results). The previous - * method was more susceptible to pathological cases giving excessive - * hash collisions. + * We also need to avoid the last segment of the last context, because that + * would give a protovsid of 0x1fffffffff. That will result in a VSID 0 + * because of the modulo operation in vsid scramble. But the vmemmap + * (which is what uses region 0xf) will never be close to 64TB in size + * (it's 56 bytes per page of system memory). */ #define CONTEXT_BITS 19 #define USER_ESID_BITS 18 #define USER_ESID_BITS_1T 6 +/* + * 256MB segment + * The proto-VSID space has 2^(CONTEX_BITS + USER_ESID_BITS) - 1 segments + * available for user + kernel mapping. The top 4 contexts are used for + * kernel mapping. Each segment contains 2^28 bytes. Each + * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts + * (19 == 37 + 28 - 46). + */ +#define MAX_USER_CONTEXT ((ASM_CONST(1) << CONTEXT_BITS) - 5) + /* * This should be computed such that protovosid * vsid_mulitplier * doesn't overflow 64 bits. It should also be co-prime to vsid_modulus */ #define VSID_MULTIPLIER_256M ASM_CONST(12538073) /* 24-bit prime */ -#define VSID_BITS_256M (CONTEXT_BITS + USER_ESID_BITS + 1) +#define VSID_BITS_256M (CONTEXT_BITS + USER_ESID_BITS) #define VSID_MODULUS_256M ((1UL<= \ * 2^36-1, then r3+1 has the 2^36 bit set. So, if r3+1 has \ * the bit clear, r3 already has the answer we want, if it \ @@ -514,34 +521,6 @@ typedef struct { }) #endif /* 1 */ -/* - * This is only valid for addresses >= PAGE_OFFSET - * The proto-VSID space is divided into two class - * User: 0 to 2^(CONTEXT_BITS + USER_ESID_BITS) -1 - * kernel: 2^(CONTEXT_BITS + USER_ESID_BITS) to 2^(VSID_BITS) - 1 - * - * With KERNEL_START at 0xc000000000000000, the proto vsid for - * the kernel ends up with 0xc00000000 (36 bits). With 64TB - * support we need to have kernel proto-VSID in the - * [2^37 to 2^38 - 1] range due to the increased USER_ESID_BITS. - */ -static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize) -{ - unsigned long proto_vsid; - /* - * We need to make sure proto_vsid for the kernel is - * >= 2^(CONTEXT_BITS + USER_ESID_BITS[_1T]) - */ - if (ssize == MMU_SEGSIZE_256M) { - proto_vsid = ea >> SID_SHIFT; - proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS)); - return vsid_scramble(proto_vsid, 256M); - } - proto_vsid = ea >> SID_SHIFT_1T; - proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS_1T)); - return vsid_scramble(proto_vsid, 1T); -} - /* Returns the segment size indicator for a user address */ static inline int user_segment_size(unsigned long addr) { @@ -551,10 +530,15 @@ static inline int user_segment_size(unsigned long addr) return MMU_SEGSIZE_256M; } -/* This is only valid for user addresses (which are below 2^44) */ static inline unsigned long get_vsid(unsigned long context, unsigned long ea, int ssize) { + /* + * Bad address. We return VSID 0 for that + */ + if ((ea & ~REGION_MASK) >= PGTABLE_RANGE) + return 0; + if (ssize == MMU_SEGSIZE_256M) return vsid_scramble((context << USER_ESID_BITS) | (ea >> SID_SHIFT), 256M); @@ -562,6 +546,25 @@ static inline unsigned long get_vsid(unsigned long context, unsigned long ea, | (ea >> SID_SHIFT_1T), 1T); } +/* + * This is only valid for addresses >= PAGE_OFFSET + * + * For kernel space, we use the top 4 context ids to map address as below + * 0x7fffc - [ 0xc000000000000000 - 0xc0003fffffffffff ] + * 0x7fffd - [ 0xd000000000000000 - 0xd0003fffffffffff ] + * 0x7fffe - [ 0xe000000000000000 - 0xe0003fffffffffff ] + * 0x7ffff - [ 0xf000000000000000 - 0xf0003fffffffffff ] + */ +static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize) +{ + unsigned long context; + + /* + * kernel take the top 4 context from the available range + */ + context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1; + return get_vsid(context, ea, ssize); +} #endif /* __ASSEMBLY__ */ #endif /* _ASM_POWERPC_MMU_HASH64_H_ */ diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 87ef8f5ee5bc..b112359ea7a8 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -1452,20 +1452,36 @@ do_ste_alloc: _GLOBAL(do_stab_bolted) stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */ + mfspr r11,SPRN_DAR /* ea */ + /* + * check for bad kernel/user address + * (ea & ~REGION_MASK) >= PGTABLE_RANGE + */ + rldicr. r9,r11,4,(63 - 46 - 4) + li r9,0 /* VSID = 0 for bad address */ + bne- 0f + + /* + * Calculate VSID: + * This is the kernel vsid, we take the top for context from + * the range. context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1 + * Here we know that (ea >> 60) == 0xc + */ + lis r9,(MAX_USER_CONTEXT + 1)@ha + addi r9,r9,(MAX_USER_CONTEXT + 1)@l + + srdi r10,r11,SID_SHIFT + rldimi r10,r9,USER_ESID_BITS,0 /* proto vsid */ + ASM_VSID_SCRAMBLE(r10, r9, 256M) + rldic r9,r10,12,16 /* r9 = vsid << 12 */ + +0: /* Hash to the primary group */ ld r10,PACASTABVIRT(r13) - mfspr r11,SPRN_DAR - srdi r11,r11,28 + srdi r11,r11,SID_SHIFT rldimi r10,r11,7,52 /* r10 = first ste of the group */ - /* Calculate VSID */ - /* This is a kernel address, so protovsid = ESID | 1 << 37 */ - li r9,0x1 - rldimi r11,r9,(CONTEXT_BITS + USER_ESID_BITS),0 - ASM_VSID_SCRAMBLE(r11, r9, 256M) - rldic r9,r11,12,16 /* r9 = vsid << 12 */ - /* Search the primary group for a free entry */ 1: ld r11,0(r10) /* Test valid bit of the current ste */ andi. r11,r11,0x80 diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 6ec6c1997b3a..f410c3e12c1e 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -195,6 +195,11 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, unsigned long vpn = hpt_vpn(vaddr, vsid, ssize); unsigned long tprot = prot; + /* + * If we hit a bad address return error. + */ + if (!vsid) + return -1; /* Make kernel text executable */ if (overlaps_kernel_text(vaddr, vaddr + step)) tprot &= ~HPTE_R_N; @@ -924,11 +929,6 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) DBG_LOW("hash_page(ea=%016lx, access=%lx, trap=%lx\n", ea, access, trap); - if ((ea & ~REGION_MASK) >= PGTABLE_RANGE) { - DBG_LOW(" out of pgtable range !\n"); - return 1; - } - /* Get region & vsid */ switch (REGION_ID(ea)) { case USER_REGION_ID: @@ -959,6 +959,11 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) } DBG_LOW(" mm=%p, mm->pgdir=%p, vsid=%016lx\n", mm, mm->pgd, vsid); + /* Bad address. */ + if (!vsid) { + DBG_LOW("Bad address!\n"); + return 1; + } /* Get pgdir */ pgdir = mm->pgd; if (pgdir == NULL) @@ -1128,6 +1133,8 @@ void hash_preload(struct mm_struct *mm, unsigned long ea, /* Get VSID */ ssize = user_segment_size(ea); vsid = get_vsid(mm->context.id, ea, ssize); + if (!vsid) + return; /* Hash doesn't like irqs */ local_irq_save(flags); @@ -1235,6 +1242,9 @@ static void kernel_map_linear_page(unsigned long vaddr, unsigned long lmi) hash = hpt_hash(vpn, PAGE_SHIFT, mmu_kernel_ssize); hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP); + /* Don't create HPTE entries for bad address */ + if (!vsid) + return; ret = ppc_md.hpte_insert(hpteg, vpn, __pa(vaddr), mode, HPTE_V_BOLTED, mmu_linear_psize, mmu_kernel_ssize); diff --git a/arch/powerpc/mm/mmu_context_hash64.c b/arch/powerpc/mm/mmu_context_hash64.c index 40bc5b0ace54..d1d1b92c5b99 100644 --- a/arch/powerpc/mm/mmu_context_hash64.c +++ b/arch/powerpc/mm/mmu_context_hash64.c @@ -29,15 +29,6 @@ static DEFINE_SPINLOCK(mmu_context_lock); static DEFINE_IDA(mmu_context_ida); -/* - * 256MB segment - * The proto-VSID space has 2^(CONTEX_BITS + USER_ESID_BITS) - 1 segments - * available for user mappings. Each segment contains 2^28 bytes. Each - * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts - * (19 == 37 + 28 - 46). - */ -#define MAX_CONTEXT ((1UL << CONTEXT_BITS) - 1) - int __init_new_context(void) { int index; @@ -56,7 +47,7 @@ again: else if (err) return err; - if (index > MAX_CONTEXT) { + if (index > MAX_USER_CONTEXT) { spin_lock(&mmu_context_lock); ida_remove(&mmu_context_ida, index); spin_unlock(&mmu_context_lock); diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S index 1a16ca227757..77aafaa1ab09 100644 --- a/arch/powerpc/mm/slb_low.S +++ b/arch/powerpc/mm/slb_low.S @@ -31,10 +31,15 @@ * No other registers are examined or changed. */ _GLOBAL(slb_allocate_realmode) - /* r3 = faulting address */ + /* + * check for bad kernel/user address + * (ea & ~REGION_MASK) >= PGTABLE_RANGE + */ + rldicr. r9,r3,4,(63 - 46 - 4) + bne- 8f srdi r9,r3,60 /* get region */ - srdi r10,r3,28 /* get esid */ + srdi r10,r3,SID_SHIFT /* get esid */ cmpldi cr7,r9,0xc /* cmp PAGE_OFFSET for later use */ /* r3 = address, r10 = esid, cr7 = <> PAGE_OFFSET */ @@ -56,12 +61,14 @@ _GLOBAL(slb_allocate_realmode) */ _GLOBAL(slb_miss_kernel_load_linear) li r11,0 - li r9,0x1 /* - * for 1T we shift 12 bits more. slb_finish_load_1T will do - * the necessary adjustment + * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1 + * r9 = region id. */ - rldimi r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0 + addis r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha + addi r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l + + BEGIN_FTR_SECTION b slb_finish_load END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT) @@ -91,24 +98,19 @@ _GLOBAL(slb_miss_kernel_load_vmemmap) _GLOBAL(slb_miss_kernel_load_io) li r11,0 6: - li r9,0x1 /* - * for 1T we shift 12 bits more. slb_finish_load_1T will do - * the necessary adjustment + * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1 + * r9 = region id. */ - rldimi r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0 + addis r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha + addi r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l + BEGIN_FTR_SECTION b slb_finish_load END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT) b slb_finish_load_1T -0: /* user address: proto-VSID = context << 15 | ESID. First check - * if the address is within the boundaries of the user region - */ - srdi. r9,r10,USER_ESID_BITS - bne- 8f /* invalid ea bits set */ - - +0: /* when using slices, we extract the psize off the slice bitmaps * and then we need to get the sllp encoding off the mmu_psize_defs * array. @@ -164,15 +166,13 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT) ld r9,PACACONTEXTID(r13) BEGIN_FTR_SECTION cmpldi r10,0x1000 -END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) - rldimi r10,r9,USER_ESID_BITS,0 -BEGIN_FTR_SECTION bge slb_finish_load_1T END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) b slb_finish_load 8: /* invalid EA */ li r10,0 /* BAD_VSID */ + li r9,0 /* BAD_VSID */ li r11,SLB_VSID_USER /* flags don't much matter */ b slb_finish_load @@ -221,8 +221,6 @@ _GLOBAL(slb_allocate_user) /* get context to calculate proto-VSID */ ld r9,PACACONTEXTID(r13) - rldimi r10,r9,USER_ESID_BITS,0 - /* fall through slb_finish_load */ #endif /* __DISABLED__ */ @@ -231,9 +229,10 @@ _GLOBAL(slb_allocate_user) /* * Finish loading of an SLB entry and return * - * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET + * r3 = EA, r9 = context, r10 = ESID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET */ slb_finish_load: + rldimi r10,r9,USER_ESID_BITS,0 ASM_VSID_SCRAMBLE(r10,r9,256M) /* * bits above VSID_BITS_256M need to be ignored from r10 @@ -298,10 +297,11 @@ _GLOBAL(slb_compare_rr_to_size) /* * Finish loading of a 1T SLB entry (for the kernel linear mapping) and return. * - * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9 + * r3 = EA, r9 = context, r10 = ESID(256MB), r11 = flags, clobbers r9 */ slb_finish_load_1T: - srdi r10,r10,40-28 /* get 1T ESID */ + srdi r10,r10,(SID_SHIFT_1T - SID_SHIFT) /* get 1T ESID */ + rldimi r10,r9,USER_ESID_BITS_1T,0 ASM_VSID_SCRAMBLE(r10,r9,1T) /* * bits above VSID_BITS_1T need to be ignored from r10 diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c index 0d82ef50dc3f..023ec8a13f38 100644 --- a/arch/powerpc/mm/tlb_hash64.c +++ b/arch/powerpc/mm/tlb_hash64.c @@ -82,11 +82,11 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr, if (!is_kernel_addr(addr)) { ssize = user_segment_size(addr); vsid = get_vsid(mm->context.id, addr, ssize); - WARN_ON(vsid == 0); } else { vsid = get_kernel_vsid(addr, mmu_kernel_ssize); ssize = mmu_kernel_ssize; } + WARN_ON(vsid == 0); vpn = hpt_vpn(addr, vsid, ssize); rpte = __real_pte(__pte(pte), ptep); -- cgit v1.2.3 From af81d7878c641629f2693ae3fdaf74b4af14dfca Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Wed, 13 Mar 2013 03:34:55 +0000 Subject: powerpc: Rename USER_ESID_BITS* to ESID_BITS* Now we use ESID_BITS of kernel address to build proto vsid. So rename USER_ESIT_BITS to ESID_BITS Acked-by: Paul Mackerras Signed-off-by: Aneesh Kumar K.V Signed-off-by: Benjamin Herrenschmidt CC: [v3.8] --- arch/powerpc/include/asm/mmu-hash64.h | 16 ++++++++-------- arch/powerpc/kernel/exceptions-64s.S | 2 +- arch/powerpc/kvm/book3s_64_mmu_host.c | 4 ++-- arch/powerpc/mm/pgtable_64.c | 2 +- arch/powerpc/mm/slb_low.S | 4 ++-- 5 files changed, 14 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h index a32461f9d825..b59e06f507ea 100644 --- a/arch/powerpc/include/asm/mmu-hash64.h +++ b/arch/powerpc/include/asm/mmu-hash64.h @@ -378,12 +378,12 @@ extern void slb_set_size(u16 size); */ #define CONTEXT_BITS 19 -#define USER_ESID_BITS 18 -#define USER_ESID_BITS_1T 6 +#define ESID_BITS 18 +#define ESID_BITS_1T 6 /* * 256MB segment - * The proto-VSID space has 2^(CONTEX_BITS + USER_ESID_BITS) - 1 segments + * The proto-VSID space has 2^(CONTEX_BITS + ESID_BITS) - 1 segments * available for user + kernel mapping. The top 4 contexts are used for * kernel mapping. Each segment contains 2^28 bytes. Each * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts @@ -396,15 +396,15 @@ extern void slb_set_size(u16 size); * doesn't overflow 64 bits. It should also be co-prime to vsid_modulus */ #define VSID_MULTIPLIER_256M ASM_CONST(12538073) /* 24-bit prime */ -#define VSID_BITS_256M (CONTEXT_BITS + USER_ESID_BITS) +#define VSID_BITS_256M (CONTEXT_BITS + ESID_BITS) #define VSID_MODULUS_256M ((1UL<> SID_SHIFT), 256M); - return vsid_scramble((context << USER_ESID_BITS_1T) + return vsid_scramble((context << ESID_BITS_1T) | (ea >> SID_SHIFT_1T), 1T); } diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index b112359ea7a8..200afa5bcfb7 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -1472,7 +1472,7 @@ _GLOBAL(do_stab_bolted) addi r9,r9,(MAX_USER_CONTEXT + 1)@l srdi r10,r11,SID_SHIFT - rldimi r10,r9,USER_ESID_BITS,0 /* proto vsid */ + rldimi r10,r9,ESID_BITS,0 /* proto vsid */ ASM_VSID_SCRAMBLE(r10, r9, 256M) rldic r9,r10,12,16 /* r9 = vsid << 12 */ diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c index ead58e317294..5d7d29a313eb 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_host.c +++ b/arch/powerpc/kvm/book3s_64_mmu_host.c @@ -326,8 +326,8 @@ int kvmppc_mmu_init(struct kvm_vcpu *vcpu) vcpu3s->context_id[0] = err; vcpu3s->proto_vsid_max = ((vcpu3s->context_id[0] + 1) - << USER_ESID_BITS) - 1; - vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << USER_ESID_BITS; + << ESID_BITS) - 1; + vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << ESID_BITS; vcpu3s->proto_vsid_next = vcpu3s->proto_vsid_first; kvmppc_mmu_hpte_init(vcpu); diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index e212a271c7a4..654258f165ae 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -61,7 +61,7 @@ #endif #ifdef CONFIG_PPC_STD_MMU_64 -#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT)) +#if TASK_SIZE_USER64 > (1UL << (ESID_BITS + SID_SHIFT)) #error TASK_SIZE_USER64 exceeds user VSID range #endif #endif diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S index 77aafaa1ab09..17aa6dfceb34 100644 --- a/arch/powerpc/mm/slb_low.S +++ b/arch/powerpc/mm/slb_low.S @@ -232,7 +232,7 @@ _GLOBAL(slb_allocate_user) * r3 = EA, r9 = context, r10 = ESID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET */ slb_finish_load: - rldimi r10,r9,USER_ESID_BITS,0 + rldimi r10,r9,ESID_BITS,0 ASM_VSID_SCRAMBLE(r10,r9,256M) /* * bits above VSID_BITS_256M need to be ignored from r10 @@ -301,7 +301,7 @@ _GLOBAL(slb_compare_rr_to_size) */ slb_finish_load_1T: srdi r10,r10,(SID_SHIFT_1T - SID_SHIFT) /* get 1T ESID */ - rldimi r10,r9,USER_ESID_BITS_1T,0 + rldimi r10,r9,ESID_BITS_1T,0 ASM_VSID_SCRAMBLE(r10,r9,1T) /* * bits above VSID_BITS_1T need to be ignored from r10 -- cgit v1.2.3 From a37b2dc52b88ccd926099d852eae1bb324bc92eb Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Sat, 2 Mar 2013 12:31:39 +0530 Subject: ARC: Remove SET_PERSONALITY (tracks cross-arch change) Tracks commit e72837e3e7b "default SET_PERSONALITY() in linux/elf.h" Signed-off-by: Vineet Gupta --- arch/arc/include/asm/elf.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/arc/include/asm/elf.h b/arch/arc/include/asm/elf.h index f4c8d36ebecb..a26282857683 100644 --- a/arch/arc/include/asm/elf.h +++ b/arch/arc/include/asm/elf.h @@ -72,7 +72,4 @@ extern int elf_check_arch(const struct elf32_hdr *); */ #define ELF_PLATFORM (NULL) -#define SET_PERSONALITY(ex) \ - set_personality(PER_LINUX | (current->personality & (~PER_MASK))) - #endif -- cgit v1.2.3 From 9a556ab998071457e79b319f2527642dd6e50617 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 14 Mar 2013 20:52:43 +0900 Subject: kprobes/x86: Check Interrupt Flag modifier when registering probe Currently kprobes check whether the copied instruction modifies IF (interrupt flag) on each probe hit. This results not only in introducing overhead but also involving inat_get_opcode_attribute into the kprobes hot path, and it can cause an infinite recursive call (and kernel panic in the end). Actually, since the copied instruction itself can never be modified on the buffer, it is needless to analyze the instruction on every probe hit. To fix this issue, we check it only once when registering probe and store the result on ainsn->if_modifier. Reported-by: Timo Juhani Lindfors Signed-off-by: Masami Hiramatsu Acked-by: Ananth N Mavinakayanahalli Cc: yrl.pp-manager.tt@hitachi.com Cc: Steven Rostedt Cc: David S. Miller Cc: Linus Torvalds Link: http://lkml.kernel.org/r/20130314115242.19690.33573.stgit@mhiramat-M0-7522 Signed-off-by: Ingo Molnar --- arch/x86/include/asm/kprobes.h | 1 + arch/x86/kernel/kprobes/core.c | 5 ++++- 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/kprobes.h b/arch/x86/include/asm/kprobes.h index d3ddd17405d0..5a6d2873f80e 100644 --- a/arch/x86/include/asm/kprobes.h +++ b/arch/x86/include/asm/kprobes.h @@ -77,6 +77,7 @@ struct arch_specific_insn { * a post_handler or break_handler). */ int boostable; + bool if_modifier; }; struct arch_optimized_insn { diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c index 3f06e6149981..7bfe318d3d8a 100644 --- a/arch/x86/kernel/kprobes/core.c +++ b/arch/x86/kernel/kprobes/core.c @@ -375,6 +375,9 @@ static void __kprobes arch_copy_kprobe(struct kprobe *p) else p->ainsn.boostable = -1; + /* Check whether the instruction modifies Interrupt Flag or not */ + p->ainsn.if_modifier = is_IF_modifier(p->ainsn.insn); + /* Also, displacement change doesn't affect the first byte */ p->opcode = p->ainsn.insn[0]; } @@ -434,7 +437,7 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs, __this_cpu_write(current_kprobe, p); kcb->kprobe_saved_flags = kcb->kprobe_old_flags = (regs->flags & (X86_EFLAGS_TF | X86_EFLAGS_IF)); - if (is_IF_modifier(p->ainsn.insn)) + if (p->ainsn.if_modifier) kcb->kprobe_saved_flags &= ~X86_EFLAGS_IF; } -- cgit v1.2.3 From fd4a5aef002bb57e8a35ed34d8a878034b9bde94 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Sun, 17 Mar 2013 14:49:57 +0100 Subject: perf/x86: Add SNB/SNB-EP scheduling constraints for cycle_activity event Add scheduling constraints for SNB/SNB-EP CYCLE_ACTIVITY event as defined by SDM Jan 2013 edition. The STALLS umasks are combinations with the NO_DISPATCH umask. Signed-off-by: Stephane Eranian Cc: peterz@infradead.org Cc: ak@linux.intel.com Cc: jolsa@redhat.com Link: http://lkml.kernel.org/r/20130317134957.GA8550@quad Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_intel.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 529c8931fc02..dab7580c47ae 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -101,6 +101,10 @@ static struct event_constraint intel_snb_event_constraints[] __read_mostly = FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */ FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */ FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */ + INTEL_UEVENT_CONSTRAINT(0x04a3, 0xf), /* CYCLE_ACTIVITY.CYCLES_NO_DISPATCH */ + INTEL_UEVENT_CONSTRAINT(0x05a3, 0xf), /* CYCLE_ACTIVITY.STALLS_L2_PENDING */ + INTEL_UEVENT_CONSTRAINT(0x02a3, 0x4), /* CYCLE_ACTIVITY.CYCLES_L1D_PENDING */ + INTEL_UEVENT_CONSTRAINT(0x06a3, 0x4), /* CYCLE_ACTIVITY.STALLS_L1D_PENDING */ INTEL_EVENT_CONSTRAINT(0x48, 0x4), /* L1D_PEND_MISS.PENDING */ INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PREC_DIST */ INTEL_EVENT_CONSTRAINT(0xcd, 0x8), /* MEM_TRANS_RETIRED.LOAD_LATENCY */ -- cgit v1.2.3 From 0d96724e298c08ba24589b4802b0a26b6a237721 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 18 Mar 2013 10:12:56 +0000 Subject: arm64: Removed unused variable in compat_setup_rt_frame() Recent clean-up of the compat signal code left an unused 'stack' variable. Signed-off-by: Catalin Marinas --- arch/arm64/kernel/signal32.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c index 7f4f3673f2bc..e393174fe859 100644 --- a/arch/arm64/kernel/signal32.c +++ b/arch/arm64/kernel/signal32.c @@ -549,7 +549,6 @@ int compat_setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set, struct pt_regs *regs) { struct compat_rt_sigframe __user *frame; - compat_stack_t stack; int err = 0; frame = compat_get_sigframe(ka, regs, sizeof(*frame)); -- cgit v1.2.3 From a2c91547b5b1b9ae515851a85b5574f205b8e1c4 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 18 Feb 2013 18:22:14 +0000 Subject: arm64: Fix build error with !SMP The __atomic_hash is only defined when SMP is enabled but the arm64ksyms.c exports it even for the UP case. Signed-off-by: Catalin Marinas --- arch/arm64/kernel/arm64ksyms.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm64/kernel/arm64ksyms.c b/arch/arm64/kernel/arm64ksyms.c index cef3925eaf60..aa3e948f7885 100644 --- a/arch/arm64/kernel/arm64ksyms.c +++ b/arch/arm64/kernel/arm64ksyms.c @@ -40,7 +40,9 @@ EXPORT_SYMBOL(__copy_to_user); EXPORT_SYMBOL(__clear_user); /* bitops */ +#ifdef CONFIG_SMP EXPORT_SYMBOL(__atomic_hash); +#endif /* physical memory */ EXPORT_SYMBOL(memstart_addr); -- cgit v1.2.3 From 18931c892724cb9408811c793fe2656d11573b3a Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Tue, 26 Feb 2013 16:55:54 +0000 Subject: arm64: fix padding computation in struct ucontext The expression to compute the padding needed to fill the uc_sigmask field to 1024 bits actually computes the padding needed for 1080 bits. Fortunately, due to the 16-byte alignment of the following field (uc_mcontext) the definition in glibc contains enough bytes of padding after uc_sigmask so that the overall offsets and size match in both definitions. Signed-off-by: Andreas Schwab Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/ucontext.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/include/asm/ucontext.h b/arch/arm64/include/asm/ucontext.h index bde960720892..42e04c877428 100644 --- a/arch/arm64/include/asm/ucontext.h +++ b/arch/arm64/include/asm/ucontext.h @@ -22,7 +22,7 @@ struct ucontext { stack_t uc_stack; sigset_t uc_sigmask; /* glibc uses a 1024-bit sigset_t */ - __u8 __unused[(1024 - sizeof(sigset_t)) / 8]; + __u8 __unused[1024 / 8 - sizeof(sigset_t)]; /* last for future expansion */ struct sigcontext uc_mcontext; }; -- cgit v1.2.3 From b4811bacbc68f6e17d442df88f98afaa9394d4f5 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 13 Mar 2013 17:36:37 +0100 Subject: ARM: fix CONFIG_VIRT_TO_BUS handling 887cbce0 "arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUS" and 4febd95a8 "Select VIRT_TO_BUS directly where needed" from Stephen Rothwell changed globally how CONFIG_VIRT_TO_BUS is selected, while my own a5d533ee0 "ARM: disable virt_to_bus/ virt_to_bus almost everywhere" was merged at the same time and changed which platforms select it on ARM. The result of this conflict was that we again see CONFIG_VIRT_TO_BUS on all ARM systems. This patch fixes up the problem and removes CONFIG_ARCH_NO_VIRT_TO_BUS again on ARM. Signed-off-by: Arnd Bergmann Cc: Russell King Cc: Stephen Rothwell --- arch/arm/Kconfig | 7 ++----- arch/arm/mach-footbridge/Kconfig | 1 + 2 files changed, 3 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ca1b6fd94a3f..6d6e77c89691 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -49,7 +49,6 @@ config ARM select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_SYSCALL_TRACEPOINTS select HAVE_UID16 - select HAVE_VIRT_TO_BUS select KTIME_SCALAR select PERF_USE_VMALLOC select RTC_LIB @@ -743,6 +742,7 @@ config ARCH_RPC select NEED_MACH_IO_H select NEED_MACH_MEMORY_H select NO_IOPORT + select VIRT_TO_BUS help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -878,6 +878,7 @@ config ARCH_SHARK select ISA_DMA select NEED_MACH_MEMORY_H select PCI + select VIRT_TO_BUS select ZONE_DMA help Support for the StrongARM based Digital DNARD machine, also known @@ -1461,10 +1462,6 @@ config ISA_DMA bool select ISA_DMA_API -config ARCH_NO_VIRT_TO_BUS - def_bool y - depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK - # Select ISA DMA interface config ISA_DMA_API bool diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index abda5a18a664..0f2111a11315 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -67,6 +67,7 @@ config ARCH_NETWINDER select ISA select ISA_DMA select PCI + select VIRT_TO_BUS help Say Y here if you intend to run this kernel on the Rebel.COM NetWinder. Information about this machine can be found at: -- cgit v1.2.3 From 66db3feb486c01349f767b98ebb10b0c3d2d021b Mon Sep 17 00:00:00 2001 From: CQ Tang Date: Mon, 18 Mar 2013 11:02:21 -0400 Subject: x86-64: Fix the failure case in copy_user_handle_tail() The increment of "to" in copy_user_handle_tail() will have incremented before a failure has been noted. This causes us to skip a byte in the failure case. Only do the increment when assured there is no failure. Signed-off-by: CQ Tang Link: http://lkml.kernel.org/r/20130318150221.8439.993.stgit@phlsvslse11.ph.intel.com Signed-off-by: Mike Marciniszyn Signed-off-by: H. Peter Anvin Cc: --- arch/x86/lib/usercopy_64.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c index 05928aae911e..906fea315791 100644 --- a/arch/x86/lib/usercopy_64.c +++ b/arch/x86/lib/usercopy_64.c @@ -74,10 +74,10 @@ copy_user_handle_tail(char *to, char *from, unsigned len, unsigned zerorest) char c; unsigned zero_len; - for (; len; --len) { + for (; len; --len, to++) { if (__get_user_nocheck(c, from++, sizeof(char))) break; - if (__put_user_nocheck(c, to++, sizeof(char))) + if (__put_user_nocheck(c, to, sizeof(char))) break; } -- cgit v1.2.3 From c09664bb44184b3846e8c5254db4eae4b932682a Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Mon, 18 Mar 2013 13:54:32 -0300 Subject: KVM: x86: fix deadlock in clock-in-progress request handling There is a deadlock in pvclock handling: cpu0: cpu1: kvm_gen_update_masterclock() kvm_guest_time_update() spin_lock(pvclock_gtod_sync_lock) local_irq_save(flags) spin_lock(pvclock_gtod_sync_lock) kvm_make_mclock_inprogress_request(kvm) make_all_cpus_request() smp_call_function_many() Now if smp_call_function_many() called by cpu0 tries to call function on cpu1 there will be a deadlock. Fix by moving pvclock_gtod_sync_lock protected section outside irq disabled section. Analyzed by Gleb Natapov Acked-by: Gleb Natapov Reported-and-Tested-by: Yongjie Ren Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/x86.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index f71500af1f81..f7c850b36910 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1416,15 +1416,6 @@ static int kvm_guest_time_update(struct kvm_vcpu *v) kernel_ns = 0; host_tsc = 0; - /* Keep irq disabled to prevent changes to the clock */ - local_irq_save(flags); - this_tsc_khz = __get_cpu_var(cpu_tsc_khz); - if (unlikely(this_tsc_khz == 0)) { - local_irq_restore(flags); - kvm_make_request(KVM_REQ_CLOCK_UPDATE, v); - return 1; - } - /* * If the host uses TSC clock, then passthrough TSC as stable * to the guest. @@ -1436,6 +1427,15 @@ static int kvm_guest_time_update(struct kvm_vcpu *v) kernel_ns = ka->master_kernel_ns; } spin_unlock(&ka->pvclock_gtod_sync_lock); + + /* Keep irq disabled to prevent changes to the clock */ + local_irq_save(flags); + this_tsc_khz = __get_cpu_var(cpu_tsc_khz); + if (unlikely(this_tsc_khz == 0)) { + local_irq_restore(flags); + kvm_make_request(KVM_REQ_CLOCK_UPDATE, v); + return 1; + } if (!use_master_clock) { host_tsc = native_read_tsc(); kernel_ns = get_kernel_ns(); -- cgit v1.2.3 From 9997d08806062cb7ba471ab12fa2742cfec2f413 Mon Sep 17 00:00:00 2001 From: Ben Collins Date: Mon, 18 Mar 2013 19:19:07 -0400 Subject: sgy-cts1000: Remove __dev* attributes Somehow the driver snuck in with these still in it. Signed-off-by: Ben Collins Signed-off-by: Linus Torvalds --- arch/powerpc/platforms/85xx/sgy_cts1000.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/sgy_cts1000.c b/arch/powerpc/platforms/85xx/sgy_cts1000.c index 611e92f291c4..7179726ba5c5 100644 --- a/arch/powerpc/platforms/85xx/sgy_cts1000.c +++ b/arch/powerpc/platforms/85xx/sgy_cts1000.c @@ -69,7 +69,7 @@ static irqreturn_t gpio_halt_irq(int irq, void *__data) return IRQ_HANDLED; }; -static int __devinit gpio_halt_probe(struct platform_device *pdev) +static int gpio_halt_probe(struct platform_device *pdev) { enum of_gpio_flags flags; struct device_node *node = pdev->dev.of_node; @@ -128,7 +128,7 @@ static int __devinit gpio_halt_probe(struct platform_device *pdev) return 0; } -static int __devexit gpio_halt_remove(struct platform_device *pdev) +static int gpio_halt_remove(struct platform_device *pdev) { if (halt_node) { int gpio = of_get_gpio(halt_node, 0); @@ -165,7 +165,7 @@ static struct platform_driver gpio_halt_driver = { .of_match_table = gpio_halt_match, }, .probe = gpio_halt_probe, - .remove = __devexit_p(gpio_halt_remove), + .remove = gpio_halt_remove, }; module_platform_driver(gpio_halt_driver); -- cgit v1.2.3 From 6a15075eced2d780fa6c5d83682410f47f2e800b Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 18 Mar 2013 19:24:02 +0100 Subject: ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The issue fixed by this patch manifests only then using X11 with mxsfb driver. The X11 will display either shifted image or otherwise distorted image on the LCD. The problem is that the X11 tries to reconfigure the framebuffer and along the way calls fb_ops.fb_set_par() with X11's desired configuration values. The field of particular interest is fb_info->var.sync which contains non-standard values if configured by kernel. These are either FB_SYNC_DATA_ENABLE_HIGH_ACT, FB_SYNC_DOTCLK_FAILING_ACT or both, depending on the platform configuration. Both of these values are defined in the include/linux/mxsfb.h file. The driver interprets these values and configures the LCD controller accordingly. Yet X11 only has access to the standard values for this field defined in include/uapi/linux/fb.h and thus, unlike kernel, omits these special values. This results in distorted image on the LCD. This patch moves these non-standard values into new field of the mxsfb_platform_data structure so the driver can in turn check this field instead of the video mode field for these specific portions. Moreover, this patch prefixes these values with MXSFB_SYNC_ prefix instead of FB_SYNC_ prefix to prevent confusion of subsequent users. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: Linux ARM Cc: Linux FBDEV Cc: Lothar Waßmann Cc: Sascha Hauer Tested-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/mach-mxs.c | 24 ++++++++++++------------ drivers/video/mxsfb.c | 7 +++++-- include/linux/mxsfb.h | 7 +++++-- 3 files changed, 22 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 3218f1f2c0e0..e7b781d3788f 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -41,8 +41,6 @@ static struct fb_videomode mx23evk_video_modes[] = { .lower_margin = 4, .hsync_len = 1, .vsync_len = 1, - .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | - FB_SYNC_DOTCLK_FAILING_ACT, }, }; @@ -59,8 +57,6 @@ static struct fb_videomode mx28evk_video_modes[] = { .lower_margin = 10, .hsync_len = 10, .vsync_len = 10, - .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | - FB_SYNC_DOTCLK_FAILING_ACT, }, }; @@ -77,7 +73,6 @@ static struct fb_videomode m28evk_video_modes[] = { .lower_margin = 45, .hsync_len = 1, .vsync_len = 1, - .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT, }, }; @@ -94,9 +89,7 @@ static struct fb_videomode apx4devkit_video_modes[] = { .lower_margin = 13, .hsync_len = 48, .vsync_len = 3, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT | - FB_SYNC_DATA_ENABLE_HIGH_ACT | - FB_SYNC_DOTCLK_FAILING_ACT, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, }, }; @@ -113,9 +106,7 @@ static struct fb_videomode apf28dev_video_modes[] = { .lower_margin = 0x15, .hsync_len = 64, .vsync_len = 4, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT | - FB_SYNC_DATA_ENABLE_HIGH_ACT | - FB_SYNC_DOTCLK_FAILING_ACT, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, }, }; @@ -132,7 +123,6 @@ static struct fb_videomode cfa10049_video_modes[] = { .lower_margin = 2, .hsync_len = 15, .vsync_len = 15, - .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT }, }; @@ -259,6 +249,8 @@ static void __init imx23_evk_init(void) mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes); mxsfb_pdata.default_bpp = 32; mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; + mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT | + MXSFB_SYNC_DOTCLK_FAILING_ACT; } static inline void enable_clk_enet_out(void) @@ -278,6 +270,8 @@ static void __init imx28_evk_init(void) mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes); mxsfb_pdata.default_bpp = 32; mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; + mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT | + MXSFB_SYNC_DOTCLK_FAILING_ACT; mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); } @@ -297,6 +291,7 @@ static void __init m28evk_init(void) mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes); mxsfb_pdata.default_bpp = 16; mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; + mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT; } static void __init sc_sps1_init(void) @@ -322,6 +317,8 @@ static void __init apx4devkit_init(void) mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes); mxsfb_pdata.default_bpp = 32; mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; + mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT | + MXSFB_SYNC_DOTCLK_FAILING_ACT; } #define ENET0_MDC__GPIO_4_0 MXS_GPIO_NR(4, 0) @@ -407,6 +404,7 @@ static void __init cfa10049_init(void) mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes); mxsfb_pdata.default_bpp = 32; mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; + mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT; } static void __init cfa10037_init(void) @@ -423,6 +421,8 @@ static void __init apf28_init(void) mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes); mxsfb_pdata.default_bpp = 16; mxsfb_pdata.ld_intf_width = STMLCDIF_16BIT; + mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT | + MXSFB_SYNC_DOTCLK_FAILING_ACT; } static void __init mxs_machine_init(void) diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c index 755556ca5b2d..45169cbaba6e 100644 --- a/drivers/video/mxsfb.c +++ b/drivers/video/mxsfb.c @@ -169,6 +169,7 @@ struct mxsfb_info { unsigned dotclk_delay; const struct mxsfb_devdata *devdata; int mapped; + u32 sync; }; #define mxsfb_is_v3(host) (host->devdata->ipversion == 3) @@ -456,9 +457,9 @@ static int mxsfb_set_par(struct fb_info *fb_info) vdctrl0 |= VDCTRL0_HSYNC_ACT_HIGH; if (fb_info->var.sync & FB_SYNC_VERT_HIGH_ACT) vdctrl0 |= VDCTRL0_VSYNC_ACT_HIGH; - if (fb_info->var.sync & FB_SYNC_DATA_ENABLE_HIGH_ACT) + if (host->sync & MXSFB_SYNC_DATA_ENABLE_HIGH_ACT) vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH; - if (fb_info->var.sync & FB_SYNC_DOTCLK_FAILING_ACT) + if (host->sync & MXSFB_SYNC_DOTCLK_FAILING_ACT) vdctrl0 |= VDCTRL0_DOTCLK_ACT_FAILING; writel(vdctrl0, host->base + LCDC_VDCTRL0); @@ -861,6 +862,8 @@ static int mxsfb_probe(struct platform_device *pdev) INIT_LIST_HEAD(&fb_info->modelist); + host->sync = pdata->sync; + ret = mxsfb_init_fbinfo(host); if (ret != 0) goto error_init_fb; diff --git a/include/linux/mxsfb.h b/include/linux/mxsfb.h index f14943d55315..f80af8674342 100644 --- a/include/linux/mxsfb.h +++ b/include/linux/mxsfb.h @@ -24,8 +24,8 @@ #define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */ #define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */ -#define FB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6) -#define FB_SYNC_DOTCLK_FAILING_ACT (1 << 7) /* failing/negtive edge sampling */ +#define MXSFB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6) +#define MXSFB_SYNC_DOTCLK_FAILING_ACT (1 << 7) /* failing/negtive edge sampling */ struct mxsfb_platform_data { struct fb_videomode *mode_list; @@ -44,6 +44,9 @@ struct mxsfb_platform_data { * allocated. If specified,fb_size must also be specified. * fb_phys must be unused by Linux. */ + u32 sync; /* sync mask, contains MXSFB specifics not + * carried in fb_info->var.sync + */ }; #endif /* __LINUX_MXSFB_H */ -- cgit v1.2.3 From 287939a3690c8da6fd3310d7593ff0448cb9447c Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 13 Mar 2013 10:52:49 +0800 Subject: ARM: imx: add dependency check for DEBUG_IMX_UART_PORT While adding i.MX DEBUG_LL selection, commit f8c95fe (ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs) leaves Kconfig symbol DEBUG_IMX_UART_PORT there without any dependency check. This results in that everyone gets the symbol in their config, which is someting undesirable. Add "depends on ARCH_MXC" for the symbol to prevent that. Reported-by: Karl Beldan Signed-off-by: Shawn Guo --- arch/arm/Kconfig.debug | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index ecfcdba2d17c..9b31f4311ea2 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -495,6 +495,7 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART default 1 + depends on ARCH_MXC help Choose UART port on which kernel low-level debug messages should be output. -- cgit v1.2.3 From 2105fd550ca7dbdd490934f487852c2a399b20cf Mon Sep 17 00:00:00 2001 From: Pierrick Hascoet Date: Mon, 18 Mar 2013 17:04:45 +0100 Subject: arc: fix dma_address assignment during dma_map_sg() Signed-off-by: Pierrick Hascoet Signed-off-by: Vineet Gupta --- arch/arc/include/asm/dma-mapping.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arc/include/asm/dma-mapping.h b/arch/arc/include/asm/dma-mapping.h index 31f77aec0823..45b8e0cea176 100644 --- a/arch/arc/include/asm/dma-mapping.h +++ b/arch/arc/include/asm/dma-mapping.h @@ -126,7 +126,7 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int i; for_each_sg(sg, s, nents, i) - sg->dma_address = dma_map_page(dev, sg_page(s), s->offset, + s->dma_address = dma_map_page(dev, sg_page(s), s->offset, s->length, dir); return nents; -- cgit v1.2.3 From 63b7743fdd4dab8a534f366479c2bf0caa0991f7 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Tue, 5 Mar 2013 20:43:42 +0000 Subject: arm64: Do not select GENERIC_HARDIRQS_NO_DEPRECATED Config option GENERIC_HARDIRQS_NO_DEPRECATED was removed in commit 78c89825649a9a5ed526c507603196f467d781a5 ("genirq: Remove the now obsolete config options and select statements"), but the select was accidentally reintroduced in commit 8c2c3df31e3b87cb5348e48776c366ebd1dc5a7a ("arm64: Build infrastructure"). Signed-off-by: Paul Bolle Signed-off-by: Catalin Marinas --- arch/arm64/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index fd70a68387eb..9b6d19f74078 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -9,7 +9,6 @@ config ARM64 select CLONE_BACKWARDS select COMMON_CLK select GENERIC_CLOCKEVENTS - select GENERIC_HARDIRQS_NO_DEPRECATED select GENERIC_IOMAP select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW -- cgit v1.2.3 From 792072066d30372772137be9ee2f4d72d77329f9 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Tue, 19 Mar 2013 15:41:37 +0000 Subject: arm64: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS The Kconfig entry for DEBUG_ERRORS is a verbatim copy of the former arm entry for that symbol. It got removed in v2.6.39 because it wasn't actually used anywhere. There are still no users of DEBUG_ERRORS so remove this entry too. Signed-off-by: Paul Bolle [catalin.marinas@arm.com: removed option from defconfig] Signed-off-by: Catalin Marinas --- arch/arm64/Kconfig.debug | 11 ----------- arch/arm64/configs/defconfig | 1 - 2 files changed, 12 deletions(-) (limited to 'arch') diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug index 51493430f142..1a6bfe954d49 100644 --- a/arch/arm64/Kconfig.debug +++ b/arch/arm64/Kconfig.debug @@ -6,17 +6,6 @@ config FRAME_POINTER bool default y -config DEBUG_ERRORS - bool "Verbose kernel error messages" - depends on DEBUG_KERNEL - help - This option controls verbose debugging information which can be - printed when the kernel detects an internal error. This debugging - information is useful to kernel hackers when tracking down problems, - but mostly meaningless to other people. It's safe to say Y unless - you are concerned with the code size or don't want to see these - messages. - config DEBUG_STACK_USAGE bool "Enable stack utilization instrumentation" depends on DEBUG_KERNEL diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 9212c7880da7..09bef29f3a09 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -82,4 +82,3 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO=y # CONFIG_FTRACE is not set CONFIG_ATOMIC64_SELFTEST=y -CONFIG_DEBUG_ERRORS=y -- cgit v1.2.3 From c300aa64ddf57d9c5d9c898a64b36877345dd4a9 Mon Sep 17 00:00:00 2001 From: Andy Honig Date: Mon, 11 Mar 2013 09:34:52 -0700 Subject: KVM: x86: fix for buffer overflow in handling of MSR_KVM_SYSTEM_TIME (CVE-2013-1796) If the guest sets the GPA of the time_page so that the request to update the time straddles a page then KVM will write onto an incorrect page. The write is done byusing kmap atomic to get a pointer to the page for the time structure and then performing a memcpy to that page starting at an offset that the guest controls. Well behaved guests always provide a 32-byte aligned address, however a malicious guest could use this to corrupt host kernel memory. Tested: Tested against kvmclock unit test. Signed-off-by: Andrew Honig Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/x86.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index f7c850b36910..2ade60c25402 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1959,6 +1959,11 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) /* ...but clean it before doing the actual write */ vcpu->arch.time_offset = data & ~(PAGE_MASK | 1); + /* Check that the address is 32-byte aligned. */ + if (vcpu->arch.time_offset & + (sizeof(struct pvclock_vcpu_time_info) - 1)) + break; + vcpu->arch.time_page = gfn_to_page(vcpu->kvm, data >> PAGE_SHIFT); -- cgit v1.2.3 From 0b79459b482e85cb7426aa7da683a9f2c97aeae1 Mon Sep 17 00:00:00 2001 From: Andy Honig Date: Wed, 20 Feb 2013 14:48:10 -0800 Subject: KVM: x86: Convert MSR_KVM_SYSTEM_TIME to use gfn_to_hva_cache functions (CVE-2013-1797) There is a potential use after free issue with the handling of MSR_KVM_SYSTEM_TIME. If the guest specifies a GPA in a movable or removable memory such as frame buffers then KVM might continue to write to that address even after it's removed via KVM_SET_USER_MEMORY_REGION. KVM pins the page in memory so it's unlikely to cause an issue, but if the user space component re-purposes the memory previously used for the guest, then the guest will be able to corrupt that memory. Tested: Tested against kvmclock unit test Signed-off-by: Andrew Honig Signed-off-by: Marcelo Tosatti --- arch/x86/include/asm/kvm_host.h | 4 ++-- arch/x86/kvm/x86.c | 47 ++++++++++++++++++----------------------- 2 files changed, 22 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 635a74d22409..4979778cc7fb 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -414,8 +414,8 @@ struct kvm_vcpu_arch { gpa_t time; struct pvclock_vcpu_time_info hv_clock; unsigned int hw_tsc_khz; - unsigned int time_offset; - struct page *time_page; + struct gfn_to_hva_cache pv_time; + bool pv_time_enabled; /* set guest stopped flag in pvclock flags field */ bool pvclock_set_guest_stopped_request; diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 2ade60c25402..f19ac0aca60d 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1406,10 +1406,9 @@ static int kvm_guest_time_update(struct kvm_vcpu *v) unsigned long flags, this_tsc_khz; struct kvm_vcpu_arch *vcpu = &v->arch; struct kvm_arch *ka = &v->kvm->arch; - void *shared_kaddr; s64 kernel_ns, max_kernel_ns; u64 tsc_timestamp, host_tsc; - struct pvclock_vcpu_time_info *guest_hv_clock; + struct pvclock_vcpu_time_info guest_hv_clock; u8 pvclock_flags; bool use_master_clock; @@ -1463,7 +1462,7 @@ static int kvm_guest_time_update(struct kvm_vcpu *v) local_irq_restore(flags); - if (!vcpu->time_page) + if (!vcpu->pv_time_enabled) return 0; /* @@ -1525,12 +1524,12 @@ static int kvm_guest_time_update(struct kvm_vcpu *v) */ vcpu->hv_clock.version += 2; - shared_kaddr = kmap_atomic(vcpu->time_page); - - guest_hv_clock = shared_kaddr + vcpu->time_offset; + if (unlikely(kvm_read_guest_cached(v->kvm, &vcpu->pv_time, + &guest_hv_clock, sizeof(guest_hv_clock)))) + return 0; /* retain PVCLOCK_GUEST_STOPPED if set in guest copy */ - pvclock_flags = (guest_hv_clock->flags & PVCLOCK_GUEST_STOPPED); + pvclock_flags = (guest_hv_clock.flags & PVCLOCK_GUEST_STOPPED); if (vcpu->pvclock_set_guest_stopped_request) { pvclock_flags |= PVCLOCK_GUEST_STOPPED; @@ -1543,12 +1542,9 @@ static int kvm_guest_time_update(struct kvm_vcpu *v) vcpu->hv_clock.flags = pvclock_flags; - memcpy(shared_kaddr + vcpu->time_offset, &vcpu->hv_clock, - sizeof(vcpu->hv_clock)); - - kunmap_atomic(shared_kaddr); - - mark_page_dirty(v->kvm, vcpu->time >> PAGE_SHIFT); + kvm_write_guest_cached(v->kvm, &vcpu->pv_time, + &vcpu->hv_clock, + sizeof(vcpu->hv_clock)); return 0; } @@ -1837,10 +1833,7 @@ static int kvm_pv_enable_async_pf(struct kvm_vcpu *vcpu, u64 data) static void kvmclock_reset(struct kvm_vcpu *vcpu) { - if (vcpu->arch.time_page) { - kvm_release_page_dirty(vcpu->arch.time_page); - vcpu->arch.time_page = NULL; - } + vcpu->arch.pv_time_enabled = false; } static void accumulate_steal_time(struct kvm_vcpu *vcpu) @@ -1947,6 +1940,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) break; case MSR_KVM_SYSTEM_TIME_NEW: case MSR_KVM_SYSTEM_TIME: { + u64 gpa_offset; kvmclock_reset(vcpu); vcpu->arch.time = data; @@ -1956,19 +1950,17 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) if (!(data & 1)) break; - /* ...but clean it before doing the actual write */ - vcpu->arch.time_offset = data & ~(PAGE_MASK | 1); + gpa_offset = data & ~(PAGE_MASK | 1); /* Check that the address is 32-byte aligned. */ - if (vcpu->arch.time_offset & - (sizeof(struct pvclock_vcpu_time_info) - 1)) + if (gpa_offset & (sizeof(struct pvclock_vcpu_time_info) - 1)) break; - vcpu->arch.time_page = - gfn_to_page(vcpu->kvm, data >> PAGE_SHIFT); - - if (is_error_page(vcpu->arch.time_page)) - vcpu->arch.time_page = NULL; + if (kvm_gfn_to_hva_cache_init(vcpu->kvm, + &vcpu->arch.pv_time, data & ~1ULL)) + vcpu->arch.pv_time_enabled = false; + else + vcpu->arch.pv_time_enabled = true; break; } @@ -2972,7 +2964,7 @@ static int kvm_vcpu_ioctl_x86_set_xcrs(struct kvm_vcpu *vcpu, */ static int kvm_set_guest_paused(struct kvm_vcpu *vcpu) { - if (!vcpu->arch.time_page) + if (!vcpu->arch.pv_time_enabled) return -EINVAL; vcpu->arch.pvclock_set_guest_stopped_request = true; kvm_make_request(KVM_REQ_CLOCK_UPDATE, vcpu); @@ -6723,6 +6715,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) goto fail_free_wbinvd_dirty_mask; vcpu->arch.ia32_tsc_adjust_msr = 0x0; + vcpu->arch.pv_time_enabled = false; kvm_async_pf_hash_reset(vcpu); kvm_pmu_init(vcpu); -- cgit v1.2.3 From e0b2029614fe7e3b09fab253630c5b70eea58f53 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Tue, 12 Mar 2013 21:35:19 +0100 Subject: sparc: delete "if !ULTRA_HAS_POPULATION_COUNT" Commit 2d78d4beb64eb07d50665432867971c481192ebf ("[PATCH] bitops: sparc64: use generic bitops") made the default of GENERIC_HWEIGHT depend on !ULTRA_HAS_POPULATION_COUNT. But since there's no Kconfig symbol with that name, this always evaluates to true. Delete this dependency. Signed-off-by: Paul Bolle Acked-by: Sam Ravnborg Signed-off-by: David S. Miller --- arch/sparc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 289127d5241c..7fcd4b4ebcfc 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -197,7 +197,7 @@ config RWSEM_XCHGADD_ALGORITHM config GENERIC_HWEIGHT bool - default y if !ULTRA_HAS_POPULATION_COUNT + default y config GENERIC_CALIBRATE_DELAY bool -- cgit v1.2.3 From f58b20bd6bad48d6fc5633f003c3651115273fb2 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Tue, 19 Mar 2013 05:58:47 +0000 Subject: sparc: remove unused "config BITS" sparc's asm/module.h got removed in commit 786d35d45cc40b2a51a18f73e14e135d47fdced7 ("Make most arch asm/module.h files use asm-generic/module.h"). That removed the only two uses of this Kconfig symbol. So we can remove its entry too. > >From arch/sparc/Makefile: > ifeq ($(CONFIG_SPARC32),y) > [...] > > [...] > export BITS := 32 > [...] > > else > [...] > > [...] > export BITS := 64 > [...] > > So $(BITS) is set depending on whether CONFIG_SPARC32 is set or not. > Using $(BITS) in sparc's Makefiles is not using CONFIG_BITS. That > doesn't count as usage of "config BITS". Signed-off-by: Paul Bolle Acked-by: Sam Ravnborg Signed-off-by: David S. Miller --- arch/sparc/Kconfig | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 7fcd4b4ebcfc..3d361f236308 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -84,12 +84,6 @@ config ARCH_DEFCONFIG default "arch/sparc/configs/sparc32_defconfig" if SPARC32 default "arch/sparc/configs/sparc64_defconfig" if SPARC64 -# CONFIG_BITS can be used at source level to get 32/64 bits -config BITS - int - default 32 if SPARC32 - default 64 if SPARC64 - config IOMMU_HELPER bool default y if SPARC64 -- cgit v1.2.3 From 238f5908bd48f9e2f4668e0289e88cba969d710c Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 11 Mar 2013 11:27:44 +0100 Subject: md: remove CONFIG_MULTICORE_RAID456 entirely Once instance of this Kconfig macro remained after commit 51acbcec6c42b24482bac18e42befc822524535d ("md: remove CONFIG_MULTICORE_RAID456"). Remove that one too. And, while we're at it, also remove it from the defconfig files that carry it. Signed-off-by: Paul Bolle Signed-off-by: NeilBrown --- arch/tile/configs/tilegx_defconfig | 1 - arch/tile/configs/tilepro_defconfig | 1 - drivers/md/raid5.h | 4 ---- 3 files changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/tile/configs/tilegx_defconfig b/arch/tile/configs/tilegx_defconfig index 8c5eff6d6df5..47684815e5c8 100644 --- a/arch/tile/configs/tilegx_defconfig +++ b/arch/tile/configs/tilegx_defconfig @@ -330,7 +330,6 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID456=m -CONFIG_MULTICORE_RAID456=y CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=m CONFIG_DM_DEBUG=y diff --git a/arch/tile/configs/tilepro_defconfig b/arch/tile/configs/tilepro_defconfig index e7a3dfcbcda7..dd2b8f0c631f 100644 --- a/arch/tile/configs/tilepro_defconfig +++ b/arch/tile/configs/tilepro_defconfig @@ -324,7 +324,6 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID456=m -CONFIG_MULTICORE_RAID456=y CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=m CONFIG_DM_DEBUG=y diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h index 050a334e89c1..b0b663b119a8 100644 --- a/drivers/md/raid5.h +++ b/drivers/md/raid5.h @@ -221,10 +221,6 @@ struct stripe_head { struct stripe_operations { int target, target2; enum sum_check_flags zero_sum_result; - #ifdef CONFIG_MULTICORE_RAID456 - unsigned long request; - wait_queue_head_t wait_for_ops; - #endif } ops; struct r5dev { /* rreq and rvec are used for the replacement device when -- cgit v1.2.3 From c83a9d5e425d4678b05ca058fec6254f18601474 Mon Sep 17 00:00:00 2001 From: Fenghua Yu Date: Tue, 19 Mar 2013 08:04:44 -0700 Subject: x86-32, microcode_intel_early: Fix crash with CONFIG_DEBUG_VIRTUAL In 32-bit, __pa_symbol() in CONFIG_DEBUG_VIRTUAL accesses kernel data (e.g. max_low_pfn) that not only hasn't been setup yet in such early boot phase, but since we are in linear mode, cannot even be detected as uninitialized. Thus, use __pa_nodebug() rather than __pa_symbol() to get a global symbol's physical address. Signed-off-by: Fenghua Yu Link: http://lkml.kernel.org/r/1363705484-27645-1-git-send-email-fenghua.yu@intel.com Reported-and-tested-by: Tetsuo Handa Signed-off-by: H. Peter Anvin --- arch/x86/kernel/microcode_intel_early.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/microcode_intel_early.c b/arch/x86/kernel/microcode_intel_early.c index 7890bc838952..5992ee8086b7 100644 --- a/arch/x86/kernel/microcode_intel_early.c +++ b/arch/x86/kernel/microcode_intel_early.c @@ -90,13 +90,13 @@ microcode_phys(struct microcode_intel **mc_saved_tmp, struct microcode_intel ***mc_saved; mc_saved = (struct microcode_intel ***) - __pa_symbol(&mc_saved_data->mc_saved); + __pa_nodebug(&mc_saved_data->mc_saved); for (i = 0; i < mc_saved_data->mc_saved_count; i++) { struct microcode_intel *p; p = *(struct microcode_intel **) - __pa(mc_saved_data->mc_saved + i); - mc_saved_tmp[i] = (struct microcode_intel *)__pa(p); + __pa_nodebug(mc_saved_data->mc_saved + i); + mc_saved_tmp[i] = (struct microcode_intel *)__pa_nodebug(p); } } #endif @@ -562,7 +562,7 @@ scan_microcode(unsigned long start, unsigned long end, struct cpio_data cd; long offset = 0; #ifdef CONFIG_X86_32 - char *p = (char *)__pa_symbol(ucode_name); + char *p = (char *)__pa_nodebug(ucode_name); #else char *p = ucode_name; #endif @@ -630,8 +630,8 @@ static void __cpuinit print_ucode(struct ucode_cpu_info *uci) if (mc_intel == NULL) return; - delay_ucode_info_p = (int *)__pa_symbol(&delay_ucode_info); - current_mc_date_p = (int *)__pa_symbol(¤t_mc_date); + delay_ucode_info_p = (int *)__pa_nodebug(&delay_ucode_info); + current_mc_date_p = (int *)__pa_nodebug(¤t_mc_date); *delay_ucode_info_p = 1; *current_mc_date_p = mc_intel->hdr.date; @@ -741,15 +741,15 @@ load_ucode_intel_bsp(void) #ifdef CONFIG_X86_32 struct boot_params *boot_params_p; - boot_params_p = (struct boot_params *)__pa_symbol(&boot_params); + boot_params_p = (struct boot_params *)__pa_nodebug(&boot_params); ramdisk_image = boot_params_p->hdr.ramdisk_image; ramdisk_size = boot_params_p->hdr.ramdisk_size; initrd_start_early = ramdisk_image; initrd_end_early = initrd_start_early + ramdisk_size; _load_ucode_intel_bsp( - (struct mc_saved_data *)__pa_symbol(&mc_saved_data), - (unsigned long *)__pa_symbol(&mc_saved_in_initrd), + (struct mc_saved_data *)__pa_nodebug(&mc_saved_data), + (unsigned long *)__pa_nodebug(&mc_saved_in_initrd), initrd_start_early, initrd_end_early, &uci); #else ramdisk_image = boot_params.hdr.ramdisk_image; @@ -772,10 +772,10 @@ void __cpuinit load_ucode_intel_ap(void) unsigned long *initrd_start_p; mc_saved_in_initrd_p = - (unsigned long *)__pa_symbol(mc_saved_in_initrd); - mc_saved_data_p = (struct mc_saved_data *)__pa_symbol(&mc_saved_data); - initrd_start_p = (unsigned long *)__pa_symbol(&initrd_start); - initrd_start_addr = (unsigned long)__pa_symbol(*initrd_start_p); + (unsigned long *)__pa_nodebug(mc_saved_in_initrd); + mc_saved_data_p = (struct mc_saved_data *)__pa_nodebug(&mc_saved_data); + initrd_start_p = (unsigned long *)__pa_nodebug(&initrd_start); + initrd_start_addr = (unsigned long)__pa_nodebug(*initrd_start_p); #else mc_saved_data_p = &mc_saved_data; mc_saved_in_initrd_p = mc_saved_in_initrd; -- cgit v1.2.3 From 367f3fcd9296977bc4689546f55c5f4a9c680e8d Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 20 Mar 2013 16:53:14 +0530 Subject: ARC: Fix the typo in event identifier flags used by ptrace orig_r8_IS_EXCPN and orig_r8_IS_BRKPT were same values due to a copy/paste error. Although it looks bad and is wrong, it really doesn't affect gdb working. orig_r8_IS_BRKPT is the one relevant to debugging (breakpoints), since it is used to provide EFA vs. ERET to a ptrace "stop_pc" request. So when gdb has inserted a breakpoint, orig_r8_IS_BRKPT is already set, and anything else (i.e. orig_r8_IS_EXCPN) becoming same as it, really doesn't hurt gdb. The corollary case, could be nasty but nobody uses the ptrace "stop_pc" request in that case Signed-off-by: Vineet Gupta --- arch/arc/include/asm/entry.h | 2 +- arch/arc/include/asm/ptrace.h | 2 +- arch/arc/kernel/entry.S | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h index 23daa326fc9b..eb2ae53187d9 100644 --- a/arch/arc/include/asm/entry.h +++ b/arch/arc/include/asm/entry.h @@ -415,7 +415,7 @@ *-------------------------------------------------------------*/ .macro SAVE_ALL_EXCEPTION marker - st \marker, [sp, 8] + st \marker, [sp, 8] /* orig_r8 */ st r0, [sp, 4] /* orig_r0, needed only for sys calls */ /* Restore r9 used to code the early prologue */ diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h index 8ae783d20a81..6179de7e07c2 100644 --- a/arch/arc/include/asm/ptrace.h +++ b/arch/arc/include/asm/ptrace.h @@ -123,7 +123,7 @@ static inline long regs_return_value(struct pt_regs *regs) #define orig_r8_IS_SCALL 0x0001 #define orig_r8_IS_SCALL_RESTARTED 0x0002 #define orig_r8_IS_BRKPT 0x0004 -#define orig_r8_IS_EXCPN 0x0004 +#define orig_r8_IS_EXCPN 0x0008 #define orig_r8_IS_IRQ1 0x0010 #define orig_r8_IS_IRQ2 0x0020 diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S index b9d875a441cc..91eeab81f52d 100644 --- a/arch/arc/kernel/entry.S +++ b/arch/arc/kernel/entry.S @@ -452,7 +452,7 @@ tracesys: ; using ERET won't work since next-PC has already committed lr r12, [efa] GET_CURR_TASK_FIELD_PTR TASK_THREAD, r11 - st r12, [r11, THREAD_FAULT_ADDR] + st r12, [r11, THREAD_FAULT_ADDR] ; thread.fault_address ; PRE Sys Call Ptrace hook mov r0, sp ; pt_regs needed -- cgit v1.2.3 From f564c24103f87dc740c1c293c975565ac46b12ef Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Thu, 21 Mar 2013 17:32:36 -0700 Subject: x86, microcode_intel_early: Mark apply_microcode_early() as cpuinit Add missing __cpuinit annotation to apply_microcode_early(). Reported-by: Shaun Ruffell Cc: Fenghua Yu Link: http://lkml.kernel.org/r/20130320170310.GA23362@digium.com Signed-off-by: H. Peter Anvin --- arch/x86/kernel/microcode_intel_early.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/microcode_intel_early.c b/arch/x86/kernel/microcode_intel_early.c index 5992ee8086b7..d893e8ed8ac9 100644 --- a/arch/x86/kernel/microcode_intel_early.c +++ b/arch/x86/kernel/microcode_intel_early.c @@ -659,8 +659,8 @@ static inline void __cpuinit print_ucode(struct ucode_cpu_info *uci) } #endif -static int apply_microcode_early(struct mc_saved_data *mc_saved_data, - struct ucode_cpu_info *uci) +static int __cpuinit apply_microcode_early(struct mc_saved_data *mc_saved_data, + struct ucode_cpu_info *uci) { struct microcode_intel *mc_intel; unsigned int val[2]; -- cgit v1.2.3 From 909b3fdb0dd4f3db07b2d75425a00a2adb551383 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 12 Mar 2013 15:06:23 +0000 Subject: xen-pciback: notify hypervisor about devices intended to be assigned to guests For MSI-X capable devices the hypervisor wants to write protect the MSI-X table and PBA, yet it can't assume that resources have been assigned to their final values at device enumeration time. Thus have pciback do that notification, as having the device controlled by it is a prerequisite to assigning the device to guests anyway. This is the kernel part of hypervisor side commit 4245d33 ("x86/MSI: add mechanism to fully protect MSI-X table from PV guest accesses") on the master branch of git://xenbits.xen.org/xen.git. CC: stable@vger.kernel.org Signed-off-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/include/asm/xen/hypercall.h | 4 +-- drivers/xen/fallback.c | 3 +- drivers/xen/xen-pciback/pci_stub.c | 59 +++++++++++++++++++++++++++--------- include/xen/interface/physdev.h | 6 ++++ 4 files changed, 54 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h index c20d1ce62dc6..e709884d0ef9 100644 --- a/arch/x86/include/asm/xen/hypercall.h +++ b/arch/x86/include/asm/xen/hypercall.h @@ -382,14 +382,14 @@ HYPERVISOR_console_io(int cmd, int count, char *str) return _hypercall3(int, console_io, cmd, count, str); } -extern int __must_check HYPERVISOR_physdev_op_compat(int, void *); +extern int __must_check xen_physdev_op_compat(int, void *); static inline int HYPERVISOR_physdev_op(int cmd, void *arg) { int rc = _hypercall2(int, physdev_op, cmd, arg); if (unlikely(rc == -ENOSYS)) - rc = HYPERVISOR_physdev_op_compat(cmd, arg); + rc = xen_physdev_op_compat(cmd, arg); return rc; } diff --git a/drivers/xen/fallback.c b/drivers/xen/fallback.c index 0ef7c4d40f86..b04fb64c5a91 100644 --- a/drivers/xen/fallback.c +++ b/drivers/xen/fallback.c @@ -44,7 +44,7 @@ int xen_event_channel_op_compat(int cmd, void *arg) } EXPORT_SYMBOL_GPL(xen_event_channel_op_compat); -int HYPERVISOR_physdev_op_compat(int cmd, void *arg) +int xen_physdev_op_compat(int cmd, void *arg) { struct physdev_op op; int rc; @@ -78,3 +78,4 @@ int HYPERVISOR_physdev_op_compat(int cmd, void *arg) return rc; } +EXPORT_SYMBOL_GPL(xen_physdev_op_compat); diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c index 9204126f1560..a2278ba7fb27 100644 --- a/drivers/xen/xen-pciback/pci_stub.c +++ b/drivers/xen/xen-pciback/pci_stub.c @@ -17,6 +17,7 @@ #include #include #include +#include #include "pciback.h" #include "conf_space.h" #include "conf_space_quirks.h" @@ -85,37 +86,52 @@ static struct pcistub_device *pcistub_device_alloc(struct pci_dev *dev) static void pcistub_device_release(struct kref *kref) { struct pcistub_device *psdev; + struct pci_dev *dev; struct xen_pcibk_dev_data *dev_data; psdev = container_of(kref, struct pcistub_device, kref); - dev_data = pci_get_drvdata(psdev->dev); + dev = psdev->dev; + dev_data = pci_get_drvdata(dev); - dev_dbg(&psdev->dev->dev, "pcistub_device_release\n"); + dev_dbg(&dev->dev, "pcistub_device_release\n"); - xen_unregister_device_domain_owner(psdev->dev); + xen_unregister_device_domain_owner(dev); /* Call the reset function which does not take lock as this * is called from "unbind" which takes a device_lock mutex. */ - __pci_reset_function_locked(psdev->dev); - if (pci_load_and_free_saved_state(psdev->dev, - &dev_data->pci_saved_state)) { - dev_dbg(&psdev->dev->dev, "Could not reload PCI state\n"); - } else - pci_restore_state(psdev->dev); + __pci_reset_function_locked(dev); + if (pci_load_and_free_saved_state(dev, &dev_data->pci_saved_state)) + dev_dbg(&dev->dev, "Could not reload PCI state\n"); + else + pci_restore_state(dev); + + if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) { + struct physdev_pci_device ppdev = { + .seg = pci_domain_nr(dev->bus), + .bus = dev->bus->number, + .devfn = dev->devfn + }; + int err = HYPERVISOR_physdev_op(PHYSDEVOP_release_msix, + &ppdev); + + if (err) + dev_warn(&dev->dev, "MSI-X release failed (%d)\n", + err); + } /* Disable the device */ - xen_pcibk_reset_device(psdev->dev); + xen_pcibk_reset_device(dev); kfree(dev_data); - pci_set_drvdata(psdev->dev, NULL); + pci_set_drvdata(dev, NULL); /* Clean-up the device */ - xen_pcibk_config_free_dyn_fields(psdev->dev); - xen_pcibk_config_free_dev(psdev->dev); + xen_pcibk_config_free_dyn_fields(dev); + xen_pcibk_config_free_dev(dev); - psdev->dev->dev_flags &= ~PCI_DEV_FLAGS_ASSIGNED; - pci_dev_put(psdev->dev); + dev->dev_flags &= ~PCI_DEV_FLAGS_ASSIGNED; + pci_dev_put(dev); kfree(psdev); } @@ -355,6 +371,19 @@ static int pcistub_init_device(struct pci_dev *dev) if (err) goto config_release; + if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) { + struct physdev_pci_device ppdev = { + .seg = pci_domain_nr(dev->bus), + .bus = dev->bus->number, + .devfn = dev->devfn + }; + + err = HYPERVISOR_physdev_op(PHYSDEVOP_prepare_msix, &ppdev); + if (err) + dev_err(&dev->dev, "MSI-X preparation failed (%d)\n", + err); + } + /* We need the device active to save the state. */ dev_dbg(&dev->dev, "save state of device\n"); pci_save_state(dev); diff --git a/include/xen/interface/physdev.h b/include/xen/interface/physdev.h index 1844d31f4552..7000bb1f6e96 100644 --- a/include/xen/interface/physdev.h +++ b/include/xen/interface/physdev.h @@ -251,6 +251,12 @@ struct physdev_pci_device_add { #define PHYSDEVOP_pci_device_remove 26 #define PHYSDEVOP_restore_msi_ext 27 +/* + * Dom0 should use these two to announce MMIO resources assigned to + * MSI-X capable devices won't (prepare) or may (release) change. + */ +#define PHYSDEVOP_prepare_msix 30 +#define PHYSDEVOP_release_msix 31 struct physdev_pci_device { /* IN */ uint16_t seg; -- cgit v1.2.3 From 57471c8d3c22873f70813820e6b4d2d1fea9629d Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Fri, 22 Mar 2013 12:35:06 -0600 Subject: ARM: tegra: fix register address of slink controller Fix typo on register address of slink3 controller where register address is wrongly set as 0x7000d480 but it is 0x7000d800. Signed-off-by: Laxman Dewangan Cc: Signed-off-by: Stephen Warren Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/tegra20.dtsi | 2 +- arch/arm/boot/dts/tegra30.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 48d00a099ce3..3d3f64d2111a 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -385,7 +385,7 @@ spi@7000d800 { compatible = "nvidia,tegra20-slink"; - reg = <0x7000d480 0x200>; + reg = <0x7000d800 0x200>; interrupts = <0 83 0x04>; nvidia,dma-request-selector = <&apbdma 17>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 9d87a3ffe998..dbf46c272562 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -372,7 +372,7 @@ spi@7000d800 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; - reg = <0x7000d480 0x200>; + reg = <0x7000d800 0x200>; interrupts = <0 83 0x04>; nvidia,dma-request-selector = <&apbdma 17>; #address-cells = <1>; -- cgit v1.2.3 From 087aa036eb79f24b856893190359ba812b460f45 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Mon, 25 Mar 2013 09:31:31 +0800 Subject: powerpc: make additional room in exception vector area The FWNMI region is fixed at 0x7000 and the vector are now overflowing that with allmodconfig. Fix that by moving slb_miss_realmode code out of that region as it doesn't need to be that close to the call sites (it is a _GLOBAL function) Fixes this build error: arch/powerpc/kernel/exceptions-64s.S: Assembler messages: arch/powerpc/kernel/exceptions-64s.S:1304: Error: attempt to move .org backwards Signed-off-by: Chen Gang Signed-off-by: Stephen Rothwell --- arch/powerpc/kernel/exceptions-64s.S | 144 +++++++++++++++++------------------ 1 file changed, 72 insertions(+), 72 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 200afa5bcfb7..56bd92362ce1 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -1066,78 +1066,6 @@ unrecov_user_slb: #endif /* __DISABLED__ */ -/* - * r13 points to the PACA, r9 contains the saved CR, - * r12 contain the saved SRR1, SRR0 is still ready for return - * r3 has the faulting address - * r9 - r13 are saved in paca->exslb. - * r3 is saved in paca->slb_r3 - * We assume we aren't going to take any exceptions during this procedure. - */ -_GLOBAL(slb_miss_realmode) - mflr r10 -#ifdef CONFIG_RELOCATABLE - mtctr r11 -#endif - - stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ - std r10,PACA_EXSLB+EX_LR(r13) /* save LR */ - - bl .slb_allocate_realmode - - /* All done -- return from exception. */ - - ld r10,PACA_EXSLB+EX_LR(r13) - ld r3,PACA_EXSLB+EX_R3(r13) - lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ - - mtlr r10 - - andi. r10,r12,MSR_RI /* check for unrecoverable exception */ - beq- 2f - -.machine push -.machine "power4" - mtcrf 0x80,r9 - mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ -.machine pop - - RESTORE_PPR_PACA(PACA_EXSLB, r9) - ld r9,PACA_EXSLB+EX_R9(r13) - ld r10,PACA_EXSLB+EX_R10(r13) - ld r11,PACA_EXSLB+EX_R11(r13) - ld r12,PACA_EXSLB+EX_R12(r13) - ld r13,PACA_EXSLB+EX_R13(r13) - rfid - b . /* prevent speculative execution */ - -2: mfspr r11,SPRN_SRR0 - ld r10,PACAKBASE(r13) - LOAD_HANDLER(r10,unrecov_slb) - mtspr SPRN_SRR0,r10 - ld r10,PACAKMSR(r13) - mtspr SPRN_SRR1,r10 - rfid - b . - -unrecov_slb: - EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) - DISABLE_INTS - bl .save_nvgprs -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception - b 1b - - -#ifdef CONFIG_PPC_970_NAP -power4_fixup_nap: - andc r9,r9,r10 - std r9,TI_LOCAL_FLAGS(r11) - ld r10,_LINK(r1) /* make idle task do the */ - std r10,_NIP(r1) /* equivalent of a blr */ - blr -#endif - .align 7 .globl alignment_common alignment_common: @@ -1335,6 +1263,78 @@ _GLOBAL(opal_mc_secondary_handler) #endif /* CONFIG_PPC_POWERNV */ +/* + * r13 points to the PACA, r9 contains the saved CR, + * r12 contain the saved SRR1, SRR0 is still ready for return + * r3 has the faulting address + * r9 - r13 are saved in paca->exslb. + * r3 is saved in paca->slb_r3 + * We assume we aren't going to take any exceptions during this procedure. + */ +_GLOBAL(slb_miss_realmode) + mflr r10 +#ifdef CONFIG_RELOCATABLE + mtctr r11 +#endif + + stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ + std r10,PACA_EXSLB+EX_LR(r13) /* save LR */ + + bl .slb_allocate_realmode + + /* All done -- return from exception. */ + + ld r10,PACA_EXSLB+EX_LR(r13) + ld r3,PACA_EXSLB+EX_R3(r13) + lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ + + mtlr r10 + + andi. r10,r12,MSR_RI /* check for unrecoverable exception */ + beq- 2f + +.machine push +.machine "power4" + mtcrf 0x80,r9 + mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ +.machine pop + + RESTORE_PPR_PACA(PACA_EXSLB, r9) + ld r9,PACA_EXSLB+EX_R9(r13) + ld r10,PACA_EXSLB+EX_R10(r13) + ld r11,PACA_EXSLB+EX_R11(r13) + ld r12,PACA_EXSLB+EX_R12(r13) + ld r13,PACA_EXSLB+EX_R13(r13) + rfid + b . /* prevent speculative execution */ + +2: mfspr r11,SPRN_SRR0 + ld r10,PACAKBASE(r13) + LOAD_HANDLER(r10,unrecov_slb) + mtspr SPRN_SRR0,r10 + ld r10,PACAKMSR(r13) + mtspr SPRN_SRR1,r10 + rfid + b . + +unrecov_slb: + EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) + DISABLE_INTS + bl .save_nvgprs +1: addi r3,r1,STACK_FRAME_OVERHEAD + bl .unrecoverable_exception + b 1b + + +#ifdef CONFIG_PPC_970_NAP +power4_fixup_nap: + andc r9,r9,r10 + std r9,TI_LOCAL_FLAGS(r11) + ld r10,_LINK(r1) /* make idle task do the */ + std r10,_NIP(r1) /* equivalent of a blr */ + blr +#endif + /* * Hash table stuff */ -- cgit v1.2.3 From 05e99c8cf9d4e53ef6e016815db40a89a6156529 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 20 Mar 2013 14:21:10 +0000 Subject: intel-pstate: Use #defines instead of hard-coded values. They are defined in coreboot (MSR_PLATFORM) and the other one is already defined in msr-index.h. Let's use those. Signed-off-by: Konrad Rzeszutek Wilk Acked-by: Viresh Kumar Acked-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- arch/x86/include/uapi/asm/msr-index.h | 1 + drivers/cpufreq/intel_pstate.c | 6 +++--- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/uapi/asm/msr-index.h b/arch/x86/include/uapi/asm/msr-index.h index 892ce40a7470..7a060f4b411f 100644 --- a/arch/x86/include/uapi/asm/msr-index.h +++ b/arch/x86/include/uapi/asm/msr-index.h @@ -44,6 +44,7 @@ #define SNB_C1_AUTO_UNDEMOTE (1UL << 27) #define SNB_C3_AUTO_UNDEMOTE (1UL << 28) +#define MSR_PLATFORM_INFO 0x000000ce #define MSR_MTRRcap 0x000000fe #define MSR_IA32_BBL_CR_CTL 0x00000119 #define MSR_IA32_BBL_CR_CTL3 0x0000011e diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index b662529072f7..ad72922919ed 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -358,14 +358,14 @@ static void intel_pstate_sysfs_expose_params(void) static int intel_pstate_min_pstate(void) { u64 value; - rdmsrl(0xCE, value); + rdmsrl(MSR_PLATFORM_INFO, value); return (value >> 40) & 0xFF; } static int intel_pstate_max_pstate(void) { u64 value; - rdmsrl(0xCE, value); + rdmsrl(MSR_PLATFORM_INFO, value); return (value >> 8) & 0xFF; } @@ -373,7 +373,7 @@ static int intel_pstate_turbo_pstate(void) { u64 value; int nont, ret; - rdmsrl(0x1AD, value); + rdmsrl(MSR_NHM_TURBO_RATIO_LIMIT, value); nont = intel_pstate_max_pstate(); ret = ((value) & 255); if (ret <= nont) -- cgit v1.2.3 From d17cfb34dc5eb527b98448f3999aac52311d438b Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 22 Mar 2013 21:47:51 +0000 Subject: ARM64: early_printk: Fix check for CONFIG_ARM64_64K_PAGES The 'CONFIG_' prefix is not implicit in IS_ENABLED(). Signed-off-by: Ben Hutchings Cc: Arnd Bergmann Cc: Paul Bolle Signed-off-by: Catalin Marinas --- arch/arm64/mm/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index 224b44ab534e..70b8cd4021c4 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -261,7 +261,7 @@ static void __init create_mapping(phys_addr_t phys, unsigned long virt, void __iomem * __init early_io_map(phys_addr_t phys, unsigned long virt) { unsigned long size, mask; - bool page64k = IS_ENABLED(ARM64_64K_PAGES); + bool page64k = IS_ENABLED(CONFIG_ARM64_64K_PAGES); pgd_t *pgd; pud_t *pud; pmd_t *pmd; -- cgit v1.2.3 From f9294e989fa6f2990da155242db03cea1550cac8 Mon Sep 17 00:00:00 2001 From: Stuart Yoder Date: Fri, 22 Mar 2013 09:12:13 +0000 Subject: powerpc: define the conditions where the ePAPR idle hcall can be supported For 32-bit, CONFIG_EPAPR_PARAVIRT pulls in both epapr_paravirt.c and epapr_hcalls.c which contains the 32-bit paravirt idle loop. For 64-bit, the paravirt idle loop is in idle_book3e.S and that source file is included only if CONFIG_PPC_BOOK3E_64 defined. This patch makes that dependency for 64-bit explicit. Fixes these build errors: arch/powerpc/kernel/built-in.o: In function `restore_pblist_ptr': ftrace.c:(.toc+0xdc0): undefined reference to `epapr_ev_idle_start' ftrace.c:(.toc+0xdd0): undefined reference to `epapr_ev_idle' Signed-off-by: Stuart Yoder Signed-off-by: Stephen Rothwell --- arch/powerpc/kernel/epapr_paravirt.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/epapr_paravirt.c b/arch/powerpc/kernel/epapr_paravirt.c index f3eab8594d9f..d44a571e45a7 100644 --- a/arch/powerpc/kernel/epapr_paravirt.c +++ b/arch/powerpc/kernel/epapr_paravirt.c @@ -23,8 +23,10 @@ #include #include +#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64) extern void epapr_ev_idle(void); extern u32 epapr_ev_idle_start[]; +#endif bool epapr_paravirt_enabled; @@ -47,11 +49,15 @@ static int __init epapr_paravirt_init(void) for (i = 0; i < (len / 4); i++) { patch_instruction(epapr_hypercall_start + i, insts[i]); +#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64) patch_instruction(epapr_ev_idle_start + i, insts[i]); +#endif } +#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64) if (of_get_property(hyper_node, "has-idle", NULL)) ppc_md.power_save = epapr_ev_idle; +#endif epapr_paravirt_enabled = true; -- cgit v1.2.3 From d3eb2c89e7ba996e8781b22a6e7d0a895ef55630 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Fri, 22 Mar 2013 10:34:28 -0400 Subject: xen/mmu: Move the setting of pvops.write_cr3 to later phase in bootup. We move the setting of write_cr3 from the early bootup variant (see git commit 0cc9129d75ef8993702d97ab0e49542c15ac6ab9 "x86-64, xen, mmu: Provide an early version of write_cr3.") to a more appropiate location. This new location sets all of the other non-early variants of pvops calls - and most importantly is before the alternative_asm mechanism kicks in. Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/mmu.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index e8e34938c57d..6afbb2ca9a0a 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1467,8 +1467,6 @@ static void __init xen_write_cr3_init(unsigned long cr3) __xen_write_cr3(true, cr3); xen_mc_issue(PARAVIRT_LAZY_CPU); /* interrupts restored */ - - pv_mmu_ops.write_cr3 = &xen_write_cr3; } #endif @@ -2122,6 +2120,7 @@ static void __init xen_post_allocator_init(void) #endif #ifdef CONFIG_X86_64 + pv_mmu_ops.write_cr3 = &xen_write_cr3; SetPagePinned(virt_to_page(level3_user_vsyscall)); #endif xen_mark_init_mm_pinned(); -- cgit v1.2.3 From ed176886b68fbc450ddbe808684a142fcad72b56 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 29 Mar 2013 11:02:30 -0700 Subject: ia64 idle: delete stale (*idle)() function pointer Commit 3e7fc708eb41 ("ia64 idle: delete pm_idle") in 3.9-rc1 didn't finish the job, leaving an un-initialized reference to (*idle)(). [ Haven't seen a crash from this - but seems like we are just being lucky that "idle" is zero so it does get initialized before we jump to randomland - Len ] Reported-by: Lars-Peter Clausen Signed-off-by: Len Brown Signed-off-by: Tony Luck Signed-off-by: Linus Torvalds --- arch/ia64/kernel/process.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index e34f565f595a..6f7dc8b7b35c 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -291,7 +291,6 @@ cpu_idle (void) } if (!need_resched()) { - void (*idle)(void); #ifdef CONFIG_SMP min_xtp(); #endif @@ -299,9 +298,7 @@ cpu_idle (void) if (mark_idle) (*mark_idle)(1); - if (!idle) - idle = default_idle; - (*idle)(); + default_idle(); if (mark_idle) (*mark_idle)(0); #ifdef CONFIG_SMP -- cgit v1.2.3