From 1eedb4a90c958d8d59e0e4f19c297b445df21cf9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 29 Nov 2008 22:37:21 +0900 Subject: ata_piix: add borked Tecra M4 to broken suspend list Tecra M4 sometimes forget what it is and reports bogus data via DMI which makes the machine evade broken suspend matching and thus fail suspend/resume. This patch updates piix_broken_suspend() such that it can match such case. As the borked DMI data is a bit generic, matching many entries to make the match more specific is necessary. As the usual DMI matching is limited to four entries, this patch uses hard coded manual matching. This is reported by Alexandru Romanescu. Signed-off-by: Tejun Heo Cc: Alexandru Romanescu Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers/ata') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 8e37be19bbf5..d6d97d8f3fa4 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1066,6 +1066,21 @@ static int piix_broken_suspend(void) if (dmi_find_device(DMI_DEV_TYPE_OEM_STRING, oemstrs[i], NULL)) return 1; + /* TECRA M4 sometimes forgets its identify and reports bogus + * DMI information. As the bogus information is a bit + * generic, match as many entries as possible. This manual + * matching is necessary because dmi_system_id.matches is + * limited to four entries. + */ + if (!strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") && + !strcmp(dmi_get_system_info(DMI_PRODUCT_NAME), "000000") && + !strcmp(dmi_get_system_info(DMI_PRODUCT_VERSION), "000000") && + !strcmp(dmi_get_system_info(DMI_PRODUCT_SERIAL), "000000") && + !strcmp(dmi_get_system_info(DMI_BOARD_VENDOR), "TOSHIBA") && + !strcmp(dmi_get_system_info(DMI_BOARD_NAME), "Portable PC") && + !strcmp(dmi_get_system_info(DMI_BOARD_VERSION), "Version A0")) + return 1; + return 0; } -- cgit v1.2.3 From 9f14786e27908a176f0568cf2132558efef71b31 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Fri, 28 Nov 2008 20:48:26 +0100 Subject: [libata] pata_rb532_cf: fix and rename register definitions The original standalone driver uses a custom address for the error register. Use it in pata_rb532_cf, too. Rename two register definitions: - The address offset 0x0800 in fact is the ATA base, not ATA command address. - The offset 0x0C00 is not a regular ATA data address, but a buffered one allowing 4-byte IO. Signed-off-by: Phil Sutter Signed-off-by: Jeff Garzik --- drivers/ata/pata_rb532_cf.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index f8b3ffc8ae9e..392116c1c16a 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -39,9 +39,11 @@ #define RB500_CF_MAXPORTS 1 #define RB500_CF_IO_DELAY 400 -#define RB500_CF_REG_CMD 0x0800 +#define RB500_CF_REG_BASE 0x0800 +#define RB500_CF_REG_ERR 0x080D #define RB500_CF_REG_CTRL 0x080E -#define RB500_CF_REG_DATA 0x0C00 +/* 32bit buffered data register offset */ +#define RB500_CF_REG_DBUF32 0x0C00 struct rb532_cf_info { void __iomem *iobase; @@ -146,13 +148,14 @@ static void rb532_pata_setup_ports(struct ata_host *ah) ap->pio_mask = 0x1f; /* PIO4 */ ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO; - ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_CMD; + ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_BASE; ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL; ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL; ata_sff_std_ports(&ap->ioaddr); - ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA; + ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DBUF32; + ap->ioaddr.error_addr = info->iobase + RB500_CF_REG_ERR; } static __devinit int rb532_pata_driver_probe(struct platform_device *pdev) -- cgit v1.2.3 From 03f60840fa462e92220b093f778b2426ceab23af Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Fri, 28 Nov 2008 20:48:35 +0100 Subject: [libata] pata_rb532_cf: fix signature of the xfer function Per definition, this function should return the number of bytes consumed. As the original parameter "buflen" is being decremented inside the read/write loop, save it in "retlen" at the beginning. Signed-off-by: Phil Sutter Acked-by: Sergei Shtyltov Acked-by: Bartlomiej Zolnierkiewicz Acked-by: Florian Fainelli Signed-off-by: Jeff Garzik --- drivers/ata/pata_rb532_cf.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index 392116c1c16a..c2e6fb9f2ef9 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -74,11 +74,12 @@ static void rb532_pata_exec_command(struct ata_port *ap, rb532_pata_finish_io(ap); } -static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf, +static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) { struct ata_port *ap = adev->link->ap; void __iomem *ioaddr = ap->ioaddr.data_addr; + int retlen = buflen; if (write_data) { for (; buflen > 0; buflen--, buf++) @@ -89,6 +90,7 @@ static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf, } rb532_pata_finish_io(adev->link->ap); + return retlen; } static void rb532_pata_freeze(struct ata_port *ap) -- cgit v1.2.3 From ac70a964b0e22a95af3628c344815857a01461b7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 27 Nov 2008 13:36:48 +0900 Subject: libata: blacklist Seagate drives which time out FLUSH_CACHE when used with NCQ Some recent Seagate harddrives have firmware bug which causes FLUSH CACHE to timeout under certain circumstances if NCQ is being used. This can be worked around by disabling NCQ and fixed by updating the firmware. Implement ATA_HORKAGE_FIRMWARE_UPDATE and blacklist these devices. The wiki page has been updated to contain information on this issue. http://ata.wiki.kernel.org/index.php/Known_issues Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 21 +++++++++++++++++++++ include/linux/libata.h | 1 + 2 files changed, 22 insertions(+) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 4214bfb13bbd..5e2eb740df46 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2492,6 +2492,13 @@ int ata_dev_configure(struct ata_device *dev) } } + if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) { + ata_dev_printk(dev, KERN_WARNING, "WARNING: device requires " + "firmware update to be fully functional.\n"); + ata_dev_printk(dev, KERN_WARNING, " contact the vendor " + "or visit http://ata.wiki.kernel.org.\n"); + } + return 0; err_out_nosup: @@ -4042,6 +4049,20 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "ST380817AS", "3.42", ATA_HORKAGE_NONCQ }, { "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ }, + /* Seagate NCQ + FLUSH CACHE firmware bug */ + { "ST31500341AS", "9JU138", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31000333AS", "9FZ136", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640623AS", "9FZ164", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640323AS", "9FZ134", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320813AS", "9FZ182", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320613AS", "9FZ162", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + /* Blacklist entries taken from Silicon Image 3124/3132 Windows driver .inf file - also several Linux problem reports */ { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, }, diff --git a/include/linux/libata.h b/include/linux/libata.h index 59b0f1c807b5..ed3f26eb5df1 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -375,6 +375,7 @@ enum { ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */ ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands not multiple of 16 bytes */ + ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firwmare update warning */ /* DMA mask for user DMA control: User visible values; DO NOT renumber */ -- cgit v1.2.3 From 2456eb819be7aa2cac73359c2855dfa30e46d75a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 8 Dec 2008 18:48:42 +0900 Subject: pata_hpt366: fix clock detection pata_hpt366 had its clock detection wrong and detected 25Mhz as 40Mhz and vice-versa. Fix it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt366.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index f2b83eabc7c7..a098ba8eaab6 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -382,10 +382,10 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* PCI clocking determines the ATA timing values to use */ /* info_hpt366 is safe against re-entry so we can scribble on it */ switch((reg1 & 0x700) >> 8) { - case 5: + case 9: hpriv = &hpt366_40; break; - case 9: + case 5: hpriv = &hpt366_25; break; default: -- cgit v1.2.3 From 9ac6212660fa3d8d0d21e782a22b956a6bc78a43 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 3 Dec 2008 09:13:46 +0100 Subject: ATA: piix, fix pointer deref on suspend Hi, I've found this issue in the mmotm 2008-12-02-17-08. -- Commit ata_piix: add borked Tecra M4 to broken suspend list introduced DMI variables checking, but they can be null, so that we possibly dereference null. Check if they are null and avoid checks in that case. Solves: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 IP: [] piix_pci_device_suspend+0x117/0x230 Signed-off-by: Jiri Slaby Cc: Jeff Garzik Cc: Alexandru Romanescu Cc: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index d6d97d8f3fa4..c11936e13dd3 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1072,7 +1072,14 @@ static int piix_broken_suspend(void) * matching is necessary because dmi_system_id.matches is * limited to four entries. */ - if (!strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") && + if (dmi_get_system_info(DMI_SYS_VENDOR) && + dmi_get_system_info(DMI_PRODUCT_NAME) && + dmi_get_system_info(DMI_PRODUCT_VERSION) && + dmi_get_system_info(DMI_PRODUCT_SERIAL) && + dmi_get_system_info(DMI_BOARD_VENDOR) && + dmi_get_system_info(DMI_BOARD_NAME) && + dmi_get_system_info(DMI_BOARD_VERSION) && + !strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") && !strcmp(dmi_get_system_info(DMI_PRODUCT_NAME), "000000") && !strcmp(dmi_get_system_info(DMI_PRODUCT_VERSION), "000000") && !strcmp(dmi_get_system_info(DMI_PRODUCT_SERIAL), "000000") && -- cgit v1.2.3 From e33ba2c6c668a2be8f192b383186ee7cbb371da0 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 5 Dec 2008 19:41:52 +0000 Subject: pata_sis: Remove bogus cable match Some systems report SIS 5513 as both vendor/id and subvendor/id string. In that case we can't distinguish the system by the id svid/sdid and in fact the entry here breaks some boxes. At some point we need to find another way to detect the Targa Visionary 1000, until then this trades a hang for some users with lower performance for others. Closes: #12092 Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_sis.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index d34236611752..e4be55e047f6 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -56,7 +56,6 @@ static const struct sis_laptop sis_laptop[] = { { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ { 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */ { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */ - { 0x5513, 0x1039, 0x5513 }, /* Targa Visionary 1000 */ /* end marker */ { 0, } }; -- cgit v1.2.3 From b604958a98f108dc6a44c32cc8062659bd5fd324 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 5 Dec 2008 19:42:38 +0000 Subject: pata_ninja32: update ID table Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_ninja32.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 4e466eae8b46..4dd9a3b031e4 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -44,7 +44,7 @@ #include #define DRV_NAME "pata_ninja32" -#define DRV_VERSION "0.1.1" +#define DRV_VERSION "0.1.3" /** @@ -130,7 +130,8 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) return rc; pci_set_master(dev); - /* Set up the register mappings */ + /* Set up the register mappings. We use the I/O mapping as only the + older chips also have MMIO on BAR 1 */ base = host->iomap[0]; if (!base) return -ENOMEM; @@ -167,8 +168,12 @@ static int ninja32_reinit_one(struct pci_dev *pdev) #endif static const struct pci_device_id ninja32[] = { + { 0x10FC, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0x8008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0xf008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0xf02C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { }, }; -- cgit v1.2.3 From e3389cbc65ecc486d4aea2f0e9114abc0f849be2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 5 Dec 2008 19:43:03 +0000 Subject: ata: Fix experimental tags Various tags are now way out of date Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 44 ++++++++++++++++++++++---------------------- 1 file changed, 22 insertions(+), 22 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 78fbec8ceda0..421b7c71e72d 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -153,7 +153,7 @@ config SATA_PROMISE If unsure, say N. config SATA_SX4 - tristate "Promise SATA SX4 support" + tristate "Promise SATA SX4 support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for Promise Serial ATA SX4. @@ -219,8 +219,8 @@ config PATA_ACPI otherwise unsupported hardware. config PATA_ALI - tristate "ALi PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "ALi PATA support" + depends on PCI help This option enables support for the ALi ATA interfaces found on the many ALi chipsets. @@ -263,7 +263,7 @@ config PATA_ATIIXP If unsure, say N. config PATA_CMD640_PCI - tristate "CMD640 PCI PATA support (Very Experimental)" + tristate "CMD640 PCI PATA support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the CMD640 PCI IDE @@ -291,8 +291,8 @@ config PATA_CS5520 If unsure, say N. config PATA_CS5530 - tristate "CS5530 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "CS5530 PATA support" + depends on PCI help This option enables support for the Cyrix/NatSemi/AMD CS5530 companion chip used with the MediaGX/Geode processor family. @@ -309,8 +309,8 @@ config PATA_CS5535 If unsure, say N. config PATA_CS5536 - tristate "CS5536 PATA support (Experimental)" - depends on PCI && X86 && !X86_64 && EXPERIMENTAL + tristate "CS5536 PATA support" + depends on PCI && X86 && !X86_64 help This option enables support for the AMD CS5536 companion chip used with the Geode LX processor family. @@ -363,7 +363,7 @@ config PATA_HPT37X If unsure, say N. config PATA_HPT3X2N - tristate "HPT 372N/302N PATA support (Very Experimental)" + tristate "HPT 372N/302N PATA support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the N variant HPT PATA @@ -389,8 +389,8 @@ config PATA_HPT3X3_DMA problems with DMA on this chipset. config PATA_ISAPNP - tristate "ISA Plug and Play PATA support (Experimental)" - depends on EXPERIMENTAL && ISAPNP + tristate "ISA Plug and Play PATA support" + depends on ISAPNP help This option enables support for ISA plug & play ATA controllers such as those found on old soundcards. @@ -498,8 +498,8 @@ config PATA_NINJA32 If unsure, say N. config PATA_NS87410 - tristate "Nat Semi NS87410 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "Nat Semi NS87410 PATA support" + depends on PCI help This option enables support for the National Semiconductor NS87410 PCI-IDE controller. @@ -507,8 +507,8 @@ config PATA_NS87410 If unsure, say N. config PATA_NS87415 - tristate "Nat Semi NS87415 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "Nat Semi NS87415 PATA support" + depends on PCI help This option enables support for the National Semiconductor NS87415 PCI-IDE controller. @@ -544,8 +544,8 @@ config PATA_PCMCIA If unsure, say N. config PATA_PDC_OLD - tristate "Older Promise PATA controller support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "Older Promise PATA controller support" + depends on PCI help This option enables support for the Promise 20246, 20262, 20263, 20265 and 20267 adapters. @@ -559,7 +559,7 @@ config PATA_QDI Support for QDI 6500 and 6580 PATA controllers on VESA local bus. config PATA_RADISYS - tristate "RADISYS 82600 PATA support (Very Experimental)" + tristate "RADISYS 82600 PATA support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the RADISYS 82600 @@ -586,8 +586,8 @@ config PATA_RZ1000 If unsure, say N. config PATA_SC1200 - tristate "SC1200 PATA support (Very Experimental)" - depends on PCI && EXPERIMENTAL + tristate "SC1200 PATA support" + depends on PCI help This option enables support for the NatSemi/AMD SC1200 SoC companion chip used with the Geode processor family. @@ -620,8 +620,8 @@ config PATA_SIL680 If unsure, say N. config PATA_SIS - tristate "SiS PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "SiS PATA support" + depends on PCI help This option enables support for SiS PATA controllers -- cgit v1.2.3 From d10d491f842243e2e3bf5a2714020f9d649e1e38 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 11 Dec 2008 13:42:42 +0900 Subject: libata: fix Seagate NCQ+FLUSH blacklist Due to miscommunication, P/N was mistaken as firmware revision strings. Update it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 65 ++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 59 insertions(+), 6 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 5e2eb740df46..bc6695e3c848 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4050,17 +4050,70 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ }, /* Seagate NCQ + FLUSH CACHE firmware bug */ - { "ST31500341AS", "9JU138", ATA_HORKAGE_NONCQ | + { "ST31500341AS", "SD15", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - { "ST31000333AS", "9FZ136", ATA_HORKAGE_NONCQ | + { "ST31500341AS", "SD16", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3640623AS", "9FZ164", ATA_HORKAGE_NONCQ | + { "ST31500341AS", "SD17", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3640323AS", "9FZ134", ATA_HORKAGE_NONCQ | + { "ST31500341AS", "SD18", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3320813AS", "9FZ182", ATA_HORKAGE_NONCQ | + { "ST31500341AS", "SD19", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3320613AS", "9FZ162", ATA_HORKAGE_NONCQ | + + { "ST31000333AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31000333AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31000333AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31000333AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31000333AS", "SD19", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST3640623AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640623AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640623AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640623AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640623AS", "SD19", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST3640323AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640323AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640323AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640323AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640323AS", "SD19", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST3320813AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320813AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320813AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320813AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320813AS", "SD19", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST3320613AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320613AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320613AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320613AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320613AS", "SD19", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, /* Blacklist entries taken from Silicon Image 3124/3132 -- cgit v1.2.3 From bab5b32a537edc83ff86bff91e46f328339f49f8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 9 Dec 2008 17:13:19 +0900 Subject: pata_hpt366: fix cable detection, pata_hpt366 is strange in that its two channels occupy two PCI functions and both are primary channels and bit1 of PCI configuration register 0x5A indicates cable for both channels. Signed-off-by: Tejun Heo Cc: Alan Cox Cc: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt366.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index a098ba8eaab6..4824821745a2 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -211,11 +211,15 @@ static u32 hpt36x_find_mode(struct ata_port *ap, int speed) static int hpt36x_cable_detect(struct ata_port *ap) { - u8 ata66; struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ata66; + /* + * Each channel of pata_hpt366 occupies separate PCI function + * as the primary channel and bit1 indicates the cable type. + */ pci_read_config_byte(pdev, 0x5A, &ata66); - if (ata66 & (1 << ap->port_no)) + if (ata66 & 2) return ATA_CBL_PATA40; return ATA_CBL_PATA80; } -- cgit v1.2.3 From 3ee89f177e3cef0b5b024bcb6df683a3fa7d795f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 9 Dec 2008 17:14:04 +0900 Subject: pata_hpt366: no ATAPI DMA IDE hpt366 driver doesn't allow DMA for ATAPI devices and MWDMA2 on ATAPI device locks up pata_hpt366. Follow the suit. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt366.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index 4824821745a2..e0c4f05d7d57 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -183,7 +183,9 @@ static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask) mask &= ~(0xF8 << ATA_SHIFT_UDMA); if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4)) mask &= ~(0xF0 << ATA_SHIFT_UDMA); - } + } else if (adev->class == ATA_DEV_ATAPI) + mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + return ata_bmdma_mode_filter(adev, mask); } -- cgit v1.2.3 From 6b61e69e7bc1cfe80ab54c6321f19061f9487ed3 Mon Sep 17 00:00:00 2001 From: Tim Yamin Date: Sun, 21 Dec 2008 02:54:29 -0700 Subject: powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver This patch adds MDMA/UDMA support using BestComm for DMA on the MPC5200 platform. Based heavily on previous work by Freescale (Bernard Kuhn, John Rigby) and Domen Puncer. With this patch, a SanDisk Extreme IV CF card gets read speeds of approximately 26.70 MB/sec. Signed-off-by: Tim Yamin Signed-off-by: Grant Likely --- arch/powerpc/sysdev/bestcomm/ata.h | 17 +- drivers/ata/Kconfig | 3 +- drivers/ata/pata_mpc52xx.c | 546 ++++++++++++++++++++++++++++++++----- 3 files changed, 488 insertions(+), 78 deletions(-) (limited to 'drivers/ata') diff --git a/arch/powerpc/sysdev/bestcomm/ata.h b/arch/powerpc/sysdev/bestcomm/ata.h index 0374322be93f..0b2371811334 100644 --- a/arch/powerpc/sysdev/bestcomm/ata.h +++ b/arch/powerpc/sysdev/bestcomm/ata.h @@ -20,18 +20,11 @@ struct bcom_ata_bd { u32 dst_pa; }; -extern struct bcom_task * -bcom_ata_init(int queue_len, int maxbufsize); - -extern void -bcom_ata_rx_prepare(struct bcom_task *tsk); - -extern void -bcom_ata_tx_prepare(struct bcom_task *tsk); - -extern void -bcom_ata_reset_bd(struct bcom_task *tsk); - +extern struct bcom_task * bcom_ata_init(int queue_len, int maxbufsize); +extern void bcom_ata_rx_prepare(struct bcom_task *tsk); +extern void bcom_ata_tx_prepare(struct bcom_task *tsk); +extern void bcom_ata_reset_bd(struct bcom_task *tsk); +extern void bcom_ata_release(struct bcom_task *tsk); #endif /* __BESTCOMM_ATA_H__ */ diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 421b7c71e72d..1a7be96d627b 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -456,7 +456,8 @@ config PATA_MARVELL config PATA_MPC52xx tristate "Freescale MPC52xx SoC internal IDE" - depends on PPC_MPC52xx + depends on PPC_MPC52xx && PPC_BESTCOMM + select PPC_BESTCOMM_ATA help This option enables support for integrated IDE controller of the Freescale MPC52xx SoC. diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index a9e827356d06..50ae6d13078a 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -6,6 +6,9 @@ * Copyright (C) 2006 Sylvain Munaut * Copyright (C) 2003 Mipsys - Benjamin Herrenschmidt * + * UDMA support based on patches by Freescale (Bernard Kuhn, John Rigby), + * Domen Puncer and Tim Yamin. + * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any * kind, whether express or implied. @@ -17,28 +20,46 @@ #include #include #include +#include -#include +#include #include #include +#include +#include +#include #define DRV_NAME "mpc52xx_ata" -#define DRV_VERSION "0.1.2" - /* Private structures used by the driver */ struct mpc52xx_ata_timings { u32 pio1; u32 pio2; + u32 mdma1; + u32 mdma2; + u32 udma1; + u32 udma2; + u32 udma3; + u32 udma4; + u32 udma5; + int using_udma; }; struct mpc52xx_ata_priv { unsigned int ipb_period; - struct mpc52xx_ata __iomem * ata_regs; + struct mpc52xx_ata __iomem *ata_regs; + phys_addr_t ata_regs_pa; int ata_irq; struct mpc52xx_ata_timings timings[2]; int csel; + + /* DMA */ + struct bcom_task *dmatsk; + const struct udmaspec *udmaspec; + const struct mdmaspec *mdmaspec; + int mpc52xx_ata_dma_last_write; + int waiting_for_dma; }; @@ -53,6 +74,107 @@ static const int ataspec_ta[5] = { 35, 35, 35, 35, 35}; #define CALC_CLKCYC(c,v) ((((v)+(c)-1)/(c))) +/* ======================================================================== */ + +/* ATAPI-4 MDMA specs (in clocks) */ +struct mdmaspec { + u32 t0M; + u32 td; + u32 th; + u32 tj; + u32 tkw; + u32 tm; + u32 tn; +}; + +static const struct mdmaspec mdmaspec66[3] = { + { .t0M = 32, .td = 15, .th = 2, .tj = 2, .tkw = 15, .tm = 4, .tn = 1 }, + { .t0M = 10, .td = 6, .th = 1, .tj = 1, .tkw = 4, .tm = 2, .tn = 1 }, + { .t0M = 8, .td = 5, .th = 1, .tj = 1, .tkw = 2, .tm = 2, .tn = 1 }, +}; + +static const struct mdmaspec mdmaspec132[3] = { + { .t0M = 64, .td = 29, .th = 3, .tj = 3, .tkw = 29, .tm = 7, .tn = 2 }, + { .t0M = 20, .td = 11, .th = 2, .tj = 1, .tkw = 7, .tm = 4, .tn = 1 }, + { .t0M = 16, .td = 10, .th = 2, .tj = 1, .tkw = 4, .tm = 4, .tn = 1 }, +}; + +/* ATAPI-4 UDMA specs (in clocks) */ +struct udmaspec { + u32 tcyc; + u32 t2cyc; + u32 tds; + u32 tdh; + u32 tdvs; + u32 tdvh; + u32 tfs; + u32 tli; + u32 tmli; + u32 taz; + u32 tzah; + u32 tenv; + u32 tsr; + u32 trfs; + u32 trp; + u32 tack; + u32 tss; +}; + +static const struct udmaspec udmaspec66[6] = { + { .tcyc = 8, .t2cyc = 16, .tds = 1, .tdh = 1, .tdvs = 5, .tdvh = 1, + .tfs = 16, .tli = 10, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, + .tsr = 3, .trfs = 5, .trp = 11, .tack = 2, .tss = 4, + }, + { .tcyc = 5, .t2cyc = 11, .tds = 1, .tdh = 1, .tdvs = 4, .tdvh = 1, + .tfs = 14, .tli = 10, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, + .tsr = 2, .trfs = 5, .trp = 9, .tack = 2, .tss = 4, + }, + { .tcyc = 4, .t2cyc = 8, .tds = 1, .tdh = 1, .tdvs = 3, .tdvh = 1, + .tfs = 12, .tli = 10, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, + .tsr = 2, .trfs = 4, .trp = 7, .tack = 2, .tss = 4, + }, + { .tcyc = 3, .t2cyc = 6, .tds = 1, .tdh = 1, .tdvs = 2, .tdvh = 1, + .tfs = 9, .tli = 7, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, + .tsr = 2, .trfs = 4, .trp = 7, .tack = 2, .tss = 4, + }, + { .tcyc = 2, .t2cyc = 4, .tds = 1, .tdh = 1, .tdvs = 1, .tdvh = 1, + .tfs = 8, .tli = 8, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, + .tsr = 2, .trfs = 4, .trp = 7, .tack = 2, .tss = 4, + }, + { .tcyc = 2, .t2cyc = 2, .tds = 1, .tdh = 1, .tdvs = 1, .tdvh = 1, + .tfs = 6, .tli = 5, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, + .tsr = 2, .trfs = 4, .trp = 6, .tack = 2, .tss = 4, + }, +}; + +static const struct udmaspec udmaspec132[6] = { + { .tcyc = 15, .t2cyc = 31, .tds = 2, .tdh = 1, .tdvs = 10, .tdvh = 1, + .tfs = 30, .tli = 20, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3, + .tsr = 7, .trfs = 10, .trp = 22, .tack = 3, .tss = 7, + }, + { .tcyc = 10, .t2cyc = 21, .tds = 2, .tdh = 1, .tdvs = 7, .tdvh = 1, + .tfs = 27, .tli = 20, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3, + .tsr = 4, .trfs = 10, .trp = 17, .tack = 3, .tss = 7, + }, + { .tcyc = 6, .t2cyc = 12, .tds = 1, .tdh = 1, .tdvs = 5, .tdvh = 1, + .tfs = 23, .tli = 20, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3, + .tsr = 3, .trfs = 8, .trp = 14, .tack = 3, .tss = 7, + }, + { .tcyc = 7, .t2cyc = 12, .tds = 1, .tdh = 1, .tdvs = 3, .tdvh = 1, + .tfs = 15, .tli = 13, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3, + .tsr = 3, .trfs = 8, .trp = 14, .tack = 3, .tss = 7, + }, + { .tcyc = 2, .t2cyc = 5, .tds = 0, .tdh = 0, .tdvs = 1, .tdvh = 1, + .tfs = 16, .tli = 14, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2, + .tsr = 2, .trfs = 7, .trp = 13, .tack = 2, .tss = 6, + }, + { .tcyc = 3, .t2cyc = 6, .tds = 1, .tdh = 1, .tdvs = 1, .tdvh = 1, + .tfs = 12, .tli = 10, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3, + .tsr = 3, .trfs = 7, .trp = 12, .tack = 3, .tss = 7, + }, +}; + +/* ======================================================================== */ /* Bit definitions inside the registers */ #define MPC52xx_ATA_HOSTCONF_SMR 0x80000000UL /* State machine reset */ @@ -66,6 +188,7 @@ static const int ataspec_ta[5] = { 35, 35, 35, 35, 35}; #define MPC52xx_ATA_HOSTSTAT_WERR 0x01000000UL /* Write Error */ #define MPC52xx_ATA_FIFOSTAT_EMPTY 0x01 /* FIFO Empty */ +#define MPC52xx_ATA_FIFOSTAT_ERROR 0x40 /* FIFO Error */ #define MPC52xx_ATA_DMAMODE_WRITE 0x01 /* Write DMA */ #define MPC52xx_ATA_DMAMODE_READ 0x02 /* Read DMA */ @@ -75,6 +198,8 @@ static const int ataspec_ta[5] = { 35, 35, 35, 35, 35}; #define MPC52xx_ATA_DMAMODE_FR 0x20 /* FIFO Reset */ #define MPC52xx_ATA_DMAMODE_HUT 0x40 /* Host UDMA burst terminate */ +#define MAX_DMA_BUFFERS 128 +#define MAX_DMA_BUFFER_SIZE 0x20000u /* Structure of the hardware registers */ struct mpc52xx_ata { @@ -140,7 +265,6 @@ struct mpc52xx_ata { /* MPC52xx low level hw control */ - static int mpc52xx_ata_compute_pio_timings(struct mpc52xx_ata_priv *priv, int dev, int pio) { @@ -148,7 +272,7 @@ mpc52xx_ata_compute_pio_timings(struct mpc52xx_ata_priv *priv, int dev, int pio) unsigned int ipb_period = priv->ipb_period; unsigned int t0, t1, t2_8, t2_16, t2i, t4, ta; - if ((pio<0) || (pio>4)) + if ((pio < 0) || (pio > 4)) return -EINVAL; t0 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t0[pio]); @@ -165,6 +289,43 @@ mpc52xx_ata_compute_pio_timings(struct mpc52xx_ata_priv *priv, int dev, int pio) return 0; } +static int +mpc52xx_ata_compute_mdma_timings(struct mpc52xx_ata_priv *priv, int dev, + int speed) +{ + struct mpc52xx_ata_timings *t = &priv->timings[dev]; + const struct mdmaspec *s = &priv->mdmaspec[speed]; + + if (speed < 0 || speed > 2) + return -EINVAL; + + t->mdma1 = (s->t0M << 24) | (s->td << 16) | (s->tkw << 8) | (s->tm); + t->mdma2 = (s->th << 24) | (s->tj << 16) | (s->tn << 8); + t->using_udma = 0; + + return 0; +} + +static int +mpc52xx_ata_compute_udma_timings(struct mpc52xx_ata_priv *priv, int dev, + int speed) +{ + struct mpc52xx_ata_timings *t = &priv->timings[dev]; + const struct udmaspec *s = &priv->udmaspec[speed]; + + if (speed < 0 || speed > 2) + return -EINVAL; + + t->udma1 = (s->t2cyc << 24) | (s->tcyc << 16) | (s->tds << 8) | s->tdh; + t->udma2 = (s->tdvs << 24) | (s->tdvh << 16) | (s->tfs << 8) | s->tli; + t->udma3 = (s->tmli << 24) | (s->taz << 16) | (s->tenv << 8) | s->tsr; + t->udma4 = (s->tss << 24) | (s->trfs << 16) | (s->trp << 8) | s->tack; + t->udma5 = (s->tzah << 24); + t->using_udma = 1; + + return 0; +} + static void mpc52xx_ata_apply_timings(struct mpc52xx_ata_priv *priv, int device) { @@ -173,14 +334,13 @@ mpc52xx_ata_apply_timings(struct mpc52xx_ata_priv *priv, int device) out_be32(®s->pio1, timing->pio1); out_be32(®s->pio2, timing->pio2); - out_be32(®s->mdma1, 0); - out_be32(®s->mdma2, 0); - out_be32(®s->udma1, 0); - out_be32(®s->udma2, 0); - out_be32(®s->udma3, 0); - out_be32(®s->udma4, 0); - out_be32(®s->udma5, 0); - + out_be32(®s->mdma1, timing->mdma1); + out_be32(®s->mdma2, timing->mdma2); + out_be32(®s->udma1, timing->udma1); + out_be32(®s->udma2, timing->udma2); + out_be32(®s->udma3, timing->udma3); + out_be32(®s->udma4, timing->udma4); + out_be32(®s->udma5, timing->udma5); priv->csel = device; } @@ -208,7 +368,7 @@ mpc52xx_ata_hw_init(struct mpc52xx_ata_priv *priv) /* Set the time slot to 1us */ tslot = CALC_CLKCYC(priv->ipb_period, 1000000); - out_be32(®s->share_cnt, tslot << 16 ); + out_be32(®s->share_cnt, tslot << 16); /* Init timings to PIO0 */ memset(priv->timings, 0x00, 2*sizeof(struct mpc52xx_ata_timings)); @@ -237,13 +397,37 @@ mpc52xx_ata_set_piomode(struct ata_port *ap, struct ata_device *adev) rv = mpc52xx_ata_compute_pio_timings(priv, adev->devno, pio); if (rv) { - printk(KERN_ERR DRV_NAME - ": Trying to select invalid PIO mode %d\n", pio); + dev_err(ap->dev, "error: invalid PIO mode: %d\n", pio); + return; + } + + mpc52xx_ata_apply_timings(priv, adev->devno); +} + +static void +mpc52xx_ata_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct mpc52xx_ata_priv *priv = ap->host->private_data; + int rv; + + if (adev->dma_mode >= XFER_UDMA_0) { + int dma = adev->dma_mode - XFER_UDMA_0; + rv = mpc52xx_ata_compute_udma_timings(priv, adev->devno, dma); + } else { + int dma = adev->dma_mode - XFER_MW_DMA_0; + rv = mpc52xx_ata_compute_mdma_timings(priv, adev->devno, dma); + } + + if (rv) { + dev_alert(ap->dev, + "Trying to select invalid DMA mode %d\n", + adev->dma_mode); return; } mpc52xx_ata_apply_timings(priv, adev->devno); } + static void mpc52xx_ata_dev_select(struct ata_port *ap, unsigned int device) { @@ -252,7 +436,173 @@ mpc52xx_ata_dev_select(struct ata_port *ap, unsigned int device) if (device != priv->csel) mpc52xx_ata_apply_timings(priv, device); - ata_sff_dev_select(ap,device); + ata_sff_dev_select(ap, device); +} + +static int +mpc52xx_ata_build_dmatable(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mpc52xx_ata_priv *priv = ap->host->private_data; + struct bcom_ata_bd *bd; + unsigned int read = !(qc->tf.flags & ATA_TFLAG_WRITE), si; + struct scatterlist *sg; + int count = 0; + + if (read) + bcom_ata_rx_prepare(priv->dmatsk); + else + bcom_ata_tx_prepare(priv->dmatsk); + + for_each_sg(qc->sg, sg, qc->n_elem, si) { + dma_addr_t cur_addr = sg_dma_address(sg); + u32 cur_len = sg_dma_len(sg); + + while (cur_len) { + unsigned int tc = min(cur_len, MAX_DMA_BUFFER_SIZE); + bd = (struct bcom_ata_bd *) + bcom_prepare_next_buffer(priv->dmatsk); + + if (read) { + bd->status = tc; + bd->src_pa = (__force u32) priv->ata_regs_pa + + offsetof(struct mpc52xx_ata, fifo_data); + bd->dst_pa = (__force u32) cur_addr; + } else { + bd->status = tc; + bd->src_pa = (__force u32) cur_addr; + bd->dst_pa = (__force u32) priv->ata_regs_pa + + offsetof(struct mpc52xx_ata, fifo_data); + } + + bcom_submit_next_buffer(priv->dmatsk, NULL); + + cur_addr += tc; + cur_len -= tc; + count++; + + if (count > MAX_DMA_BUFFERS) { + dev_alert(ap->dev, "dma table" + "too small\n"); + goto use_pio_instead; + } + } + } + return 1; + + use_pio_instead: + bcom_ata_reset_bd(priv->dmatsk); + return 0; +} + +static void +mpc52xx_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mpc52xx_ata_priv *priv = ap->host->private_data; + struct mpc52xx_ata __iomem *regs = priv->ata_regs; + + unsigned int read = !(qc->tf.flags & ATA_TFLAG_WRITE); + u8 dma_mode; + + if (!mpc52xx_ata_build_dmatable(qc)) + dev_alert(ap->dev, "%s: %i, return 1?\n", + __func__, __LINE__); + + /* Check FIFO is OK... */ + if (in_8(&priv->ata_regs->fifo_status) & MPC52xx_ATA_FIFOSTAT_ERROR) + dev_alert(ap->dev, "%s: FIFO error detected: 0x%02x!\n", + __func__, in_8(&priv->ata_regs->fifo_status)); + + if (read) { + dma_mode = MPC52xx_ATA_DMAMODE_IE | MPC52xx_ATA_DMAMODE_READ | + MPC52xx_ATA_DMAMODE_FE; + + /* Setup FIFO if direction changed */ + if (priv->mpc52xx_ata_dma_last_write != 0) { + priv->mpc52xx_ata_dma_last_write = 0; + + /* Configure FIFO with granularity to 7 */ + out_8(®s->fifo_control, 7); + out_be16(®s->fifo_alarm, 128); + + /* Set FIFO Reset bit (FR) */ + out_8(®s->dma_mode, MPC52xx_ATA_DMAMODE_FR); + } + } else { + dma_mode = MPC52xx_ATA_DMAMODE_IE | MPC52xx_ATA_DMAMODE_WRITE; + + /* Setup FIFO if direction changed */ + if (priv->mpc52xx_ata_dma_last_write != 1) { + priv->mpc52xx_ata_dma_last_write = 1; + + /* Configure FIFO with granularity to 4 */ + out_8(®s->fifo_control, 4); + out_be16(®s->fifo_alarm, 128); + } + } + + if (priv->timings[qc->dev->devno].using_udma) + dma_mode |= MPC52xx_ATA_DMAMODE_UDMA; + + out_8(®s->dma_mode, dma_mode); + priv->waiting_for_dma = ATA_DMA_ACTIVE; + + ata_wait_idle(ap); + ap->ops->sff_exec_command(ap, &qc->tf); +} + +static void +mpc52xx_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mpc52xx_ata_priv *priv = ap->host->private_data; + + bcom_set_task_auto_start(priv->dmatsk->tasknum, priv->dmatsk->tasknum); + bcom_enable(priv->dmatsk); +} + +static void +mpc52xx_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mpc52xx_ata_priv *priv = ap->host->private_data; + + bcom_disable(priv->dmatsk); + bcom_ata_reset_bd(priv->dmatsk); + priv->waiting_for_dma = 0; + + /* Check FIFO is OK... */ + if (in_8(&priv->ata_regs->fifo_status) & MPC52xx_ATA_FIFOSTAT_ERROR) + dev_alert(ap->dev, "%s: FIFO error detected: 0x%02x!\n", + __func__, in_8(&priv->ata_regs->fifo_status)); +} + +static u8 +mpc52xx_bmdma_status(struct ata_port *ap) +{ + struct mpc52xx_ata_priv *priv = ap->host->private_data; + + /* Check FIFO is OK... */ + if (in_8(&priv->ata_regs->fifo_status) & MPC52xx_ATA_FIFOSTAT_ERROR) { + dev_alert(ap->dev, "%s: FIFO error detected: 0x%02x!\n", + __func__, in_8(&priv->ata_regs->fifo_status)); + return priv->waiting_for_dma | ATA_DMA_ERR; + } + + return priv->waiting_for_dma; +} + +static irqreturn_t +mpc52xx_ata_task_irq(int irq, void *vpriv) +{ + struct mpc52xx_ata_priv *priv = vpriv; + while (bcom_buffer_done(priv->dmatsk)) + bcom_retrieve_buffer(priv->dmatsk, NULL, NULL); + + priv->waiting_for_dma |= ATA_DMA_INTR; + + return IRQ_HANDLED; } static struct scsi_host_template mpc52xx_ata_sht = { @@ -262,14 +612,18 @@ static struct scsi_host_template mpc52xx_ata_sht = { static struct ata_port_operations mpc52xx_ata_port_ops = { .inherits = &ata_sff_port_ops, .sff_dev_select = mpc52xx_ata_dev_select, - .cable_detect = ata_cable_40wire, .set_piomode = mpc52xx_ata_set_piomode, - .post_internal_cmd = ATA_OP_NULL, + .set_dmamode = mpc52xx_ata_set_dmamode, + .bmdma_setup = mpc52xx_bmdma_setup, + .bmdma_start = mpc52xx_bmdma_start, + .bmdma_stop = mpc52xx_bmdma_stop, + .bmdma_status = mpc52xx_bmdma_status, + .qc_prep = ata_noop_qc_prep, }; static int __devinit mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv, - unsigned long raw_ata_regs) + unsigned long raw_ata_regs, int mwdma_mask, int udma_mask) { struct ata_host *host; struct ata_port *ap; @@ -281,9 +635,9 @@ mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv, ap = host->ports[0]; ap->flags |= ATA_FLAG_SLAVE_POSS; - ap->pio_mask = 0x1f; /* Up to PIO4 */ - ap->mwdma_mask = 0x00; /* No MWDMA */ - ap->udma_mask = 0x00; /* No UDMA */ + ap->pio_mask = ATA_PIO4; + ap->mwdma_mask = mwdma_mask; + ap->udma_mask = udma_mask; ap->ops = &mpc52xx_ata_port_ops; host->private_data = priv; @@ -330,89 +684,139 @@ mpc52xx_ata_probe(struct of_device *op, const struct of_device_id *match) { unsigned int ipb_freq; struct resource res_mem; - int ata_irq; + int ata_irq = 0; struct mpc52xx_ata __iomem *ata_regs; - struct mpc52xx_ata_priv *priv; - int rv; + struct mpc52xx_ata_priv *priv = NULL; + int rv, ret, task_irq = 0; + int mwdma_mask = 0, udma_mask = 0; + const __be32 *prop; + int proplen; + struct bcom_task *dmatsk = NULL; /* Get ipb frequency */ ipb_freq = mpc52xx_find_ipb_freq(op->node); if (!ipb_freq) { - printk(KERN_ERR DRV_NAME ": " - "Unable to find IPB Bus frequency\n" ); + dev_err(&op->dev, "could not determine IPB bus frequency\n"); return -ENODEV; } - /* Get IRQ and register */ + /* Get device base address from device tree, request the region + * and ioremap it. */ rv = of_address_to_resource(op->node, 0, &res_mem); if (rv) { - printk(KERN_ERR DRV_NAME ": " - "Error while parsing device node resource\n" ); + dev_err(&op->dev, "could not determine device base address\n"); return rv; } - ata_irq = irq_of_parse_and_map(op->node, 0); - if (ata_irq == NO_IRQ) { - printk(KERN_ERR DRV_NAME ": " - "Error while mapping the irq\n"); - return -EINVAL; - } - - /* Request mem region */ if (!devm_request_mem_region(&op->dev, res_mem.start, - sizeof(struct mpc52xx_ata), DRV_NAME)) { - printk(KERN_ERR DRV_NAME ": " - "Error while requesting mem region\n"); - rv = -EBUSY; - goto err; + sizeof(*ata_regs), DRV_NAME)) { + dev_err(&op->dev, "error requesting register region\n"); + return -EBUSY; } - /* Remap registers */ - ata_regs = devm_ioremap(&op->dev, res_mem.start, - sizeof(struct mpc52xx_ata)); + ata_regs = devm_ioremap(&op->dev, res_mem.start, sizeof(*ata_regs)); if (!ata_regs) { - printk(KERN_ERR DRV_NAME ": " - "Error while mapping register set\n"); + dev_err(&op->dev, "error mapping device registers\n"); rv = -ENOMEM; goto err; } + /* + * By default, all DMA modes are disabled for the MPC5200. Some + * boards don't have the required signals routed to make DMA work. + * Also, the MPC5200B has a silicon bug that causes data corruption + * with UDMA if it is used at the same time as the LocalPlus bus. + * + * Instead of trying to guess what modes are usable, check the + * ATA device tree node to find out what DMA modes work on the board. + * UDMA/MWDMA modes can also be forced by adding "libata.force=" + * to the kernel boot parameters. + * + * The MPC5200 ATA controller supports MWDMA modes 0, 1 and 2 and + * UDMA modes 0, 1 and 2. + */ + prop = of_get_property(op->node, "mwdma-mode", &proplen); + if ((prop) && (proplen >= 4)) + mwdma_mask = 0x7 & ((1 << (*prop + 1)) - 1); + prop = of_get_property(op->node, "udma-mode", &proplen); + if ((prop) && (proplen >= 4)) + udma_mask = 0x7 & ((1 << (*prop + 1)) - 1); + + ata_irq = irq_of_parse_and_map(op->node, 0); + if (ata_irq == NO_IRQ) { + dev_err(&op->dev, "error mapping irq\n"); + return -EINVAL; + } + /* Prepare our private structure */ - priv = devm_kzalloc(&op->dev, sizeof(struct mpc52xx_ata_priv), - GFP_ATOMIC); + priv = devm_kzalloc(&op->dev, sizeof(*priv), GFP_ATOMIC); if (!priv) { - printk(KERN_ERR DRV_NAME ": " - "Error while allocating private structure\n"); + dev_err(&op->dev, "error allocating private structure\n"); rv = -ENOMEM; goto err; } priv->ipb_period = 1000000000 / (ipb_freq / 1000); priv->ata_regs = ata_regs; + priv->ata_regs_pa = res_mem.start; priv->ata_irq = ata_irq; priv->csel = -1; + priv->mpc52xx_ata_dma_last_write = -1; + + if (ipb_freq/1000000 == 66) { + priv->mdmaspec = mdmaspec66; + priv->udmaspec = udmaspec66; + } else { + priv->mdmaspec = mdmaspec132; + priv->udmaspec = udmaspec132; + } + + /* Allocate a BestComm task for DMA */ + dmatsk = bcom_ata_init(MAX_DMA_BUFFERS, MAX_DMA_BUFFER_SIZE); + if (!dmatsk) { + dev_err(&op->dev, "bestcomm initialization failed\n"); + rv = -ENOMEM; + goto err; + } + + task_irq = bcom_get_task_irq(dmatsk); + ret = request_irq(task_irq, &mpc52xx_ata_task_irq, IRQF_DISABLED, + "ATA task", priv); + if (ret) { + dev_err(&op->dev, "error requesting DMA IRQ\n"); + goto err; + } + priv->dmatsk = dmatsk; /* Init the hw */ rv = mpc52xx_ata_hw_init(priv); if (rv) { - printk(KERN_ERR DRV_NAME ": Error during HW init\n"); + dev_err(&op->dev, "error initializing hardware\n"); goto err; } /* Register ourselves to libata */ - rv = mpc52xx_ata_init_one(&op->dev, priv, res_mem.start); + rv = mpc52xx_ata_init_one(&op->dev, priv, res_mem.start, + mwdma_mask, udma_mask); if (rv) { - printk(KERN_ERR DRV_NAME ": " - "Error while registering to ATA layer\n"); - return rv; + dev_err(&op->dev, "error registering with ATA layer\n"); + goto err; } - /* Done */ return 0; - /* Error path */ -err: - irq_dispose_mapping(ata_irq); + err: + devm_release_mem_region(&op->dev, res_mem.start, sizeof(*ata_regs)); + if (ata_irq) + irq_dispose_mapping(ata_irq); + if (task_irq) + irq_dispose_mapping(task_irq); + if (dmatsk) + bcom_ata_release(dmatsk); + if (ata_regs) + devm_iounmap(&op->dev, ata_regs); + if (priv) + devm_kfree(&op->dev, priv); return rv; } @@ -420,10 +824,23 @@ static int mpc52xx_ata_remove(struct of_device *op) { struct mpc52xx_ata_priv *priv; + int task_irq; + /* Deregister the ATA interface */ priv = mpc52xx_ata_remove_one(&op->dev); + + /* Clean up DMA */ + task_irq = bcom_get_task_irq(priv->dmatsk); + irq_dispose_mapping(task_irq); + bcom_ata_release(priv->dmatsk); irq_dispose_mapping(priv->ata_irq); + /* Clear up IO allocations */ + devm_iounmap(&op->dev, priv->ata_regs); + devm_release_mem_region(&op->dev, priv->ata_regs_pa, + sizeof(*priv->ata_regs)); + devm_kfree(&op->dev, priv); + return 0; } @@ -447,7 +864,7 @@ mpc52xx_ata_resume(struct of_device *op) rv = mpc52xx_ata_hw_init(priv); if (rv) { - printk(KERN_ERR DRV_NAME ": Error during HW init\n"); + dev_err(host->dev, "error initializing hardware\n"); return rv; } @@ -507,5 +924,4 @@ MODULE_AUTHOR("Sylvain Munaut "); MODULE_DESCRIPTION("Freescale MPC52xx IDE/ATA libata driver"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(of, mpc52xx_ata_of_match); -MODULE_VERSION(DRV_VERSION); -- cgit v1.2.3 From 1eca4365be25c540650693e941bc06a66cf38f94 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Nov 2008 20:03:17 +0900 Subject: libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 8 +- drivers/ata/ata_generic.c | 5 +- drivers/ata/libata-acpi.c | 19 ++--- drivers/ata/libata-core.c | 183 ++++++++++++++++++++++++++++--------------- drivers/ata/libata-eh.c | 84 +++++++++----------- drivers/ata/libata-pmp.c | 22 +++--- drivers/ata/libata-scsi.c | 22 +++--- drivers/ata/pata_it821x.c | 34 ++++---- drivers/ata/pata_ixp4xx_cf.c | 14 ++-- drivers/ata/pata_legacy.c | 17 ++-- drivers/ata/pata_pdc2027x.c | 31 ++++---- drivers/ata/pata_platform.c | 14 ++-- drivers/ata/pata_rz1000.c | 16 ++-- drivers/ata/sata_sil.c | 2 +- include/linux/libata.h | 76 +++++++++++++----- 15 files changed, 307 insertions(+), 240 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index a67b8e7c712d..656448c7fef9 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1119,14 +1119,14 @@ static void ahci_start_port(struct ata_port *ap) /* turn on LEDs */ if (ap->flags & ATA_FLAG_EM) { - ata_port_for_each_link(link, ap) { + ata_for_each_link(link, ap, EDGE) { emp = &pp->em_priv[link->pmp]; ahci_transmit_led_message(ap, emp->led_state, 4); } } if (ap->flags & ATA_FLAG_SW_ACTIVITY) - ata_port_for_each_link(link, ap) + ata_for_each_link(link, ap, EDGE) ahci_init_sw_activity(link); } @@ -1361,7 +1361,7 @@ static ssize_t ahci_led_show(struct ata_port *ap, char *buf) struct ahci_em_priv *emp; int rc = 0; - ata_port_for_each_link(link, ap) { + ata_for_each_link(link, ap, EDGE) { emp = &pp->em_priv[link->pmp]; rc += sprintf(buf, "%lx\n", emp->led_state); } @@ -1941,7 +1941,7 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) u32 serror; /* determine active link */ - ata_port_for_each_link(link, ap) + ata_for_each_link(link, ap, EDGE) if (ata_link_active(link)) break; if (!link) diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 5c33767e66de..dc48a6398abe 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -57,10 +57,7 @@ static int generic_set_mode(struct ata_link *link, struct ata_device **unused) if (pdev->vendor == PCI_VENDOR_ID_CENATEK) dma_enabled = 0xFF; - ata_link_for_each_dev(dev, link) { - if (!ata_dev_enabled(dev)) - continue; - + ata_for_each_dev(dev, link, ENABLED) { /* We don't really care */ dev->pio_mode = XFER_PIO_0; dev->dma_mode = XFER_MW_DMA_0; diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index c012307d0ba6..ef02e488d468 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -89,7 +89,7 @@ void ata_acpi_associate_sata_port(struct ata_port *ap) ap->link.device->acpi_handle = NULL; - ata_port_for_each_link(link, ap) { + ata_for_each_link(link, ap, EDGE) { acpi_integer adr = SATA_ADR(ap->port_no, link->pmp); link->device->acpi_handle = @@ -129,8 +129,8 @@ static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev) struct ata_link *tlink; struct ata_device *tdev; - ata_port_for_each_link(tlink, ap) - ata_link_for_each_dev(tdev, tlink) + ata_for_each_link(tlink, ap, EDGE) + ata_for_each_dev(tdev, tlink, ALL) tdev->flags |= ATA_DFLAG_DETACH; } @@ -588,12 +588,9 @@ int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm) { struct ata_device *dev; - ata_link_for_each_dev(dev, &ap->link) { + ata_for_each_dev(dev, &ap->link, ENABLED) { unsigned long xfer_mask, udma_mask; - if (!ata_dev_enabled(dev)) - continue; - xfer_mask = ata_acpi_gtm_xfermask(dev, gtm); ata_unpack_xfermask(xfer_mask, NULL, NULL, &udma_mask); @@ -893,7 +890,7 @@ void ata_acpi_on_resume(struct ata_port *ap) * use values set by _STM. Cache _GTF result and * schedule _GTF. */ - ata_link_for_each_dev(dev, &ap->link) { + ata_for_each_dev(dev, &ap->link, ALL) { ata_acpi_clear_gtf(dev); if (ata_dev_enabled(dev) && ata_dev_get_GTF(dev, NULL) >= 0) @@ -904,7 +901,7 @@ void ata_acpi_on_resume(struct ata_port *ap) * there's no reason to evaluate IDE _GTF early * without _STM. Clear cache and schedule _GTF. */ - ata_link_for_each_dev(dev, &ap->link) { + ata_for_each_dev(dev, &ap->link, ALL) { ata_acpi_clear_gtf(dev); if (ata_dev_enabled(dev)) dev->flags |= ATA_DFLAG_ACPI_PENDING; @@ -932,8 +929,8 @@ void ata_acpi_set_state(struct ata_port *ap, pm_message_t state) if (state.event == PM_EVENT_ON) acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D0); - ata_link_for_each_dev(dev, &ap->link) { - if (dev->acpi_handle && ata_dev_enabled(dev)) + ata_for_each_dev(dev, &ap->link, ENABLED) { + if (dev->acpi_handle) acpi_bus_set_power(dev->acpi_handle, state.event == PM_EVENT_ON ? ACPI_STATE_D0 : ACPI_STATE_D3); diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index bc6695e3c848..ffd98e4e65b4 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -163,42 +163,118 @@ MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); -/* - * Iterator helpers. Don't use directly. +/** + * ata_link_next - link iteration helper + * @link: the previous link, NULL to start + * @ap: ATA port containing links to iterate + * @mode: iteration mode, one of ATA_LITER_* + * + * LOCKING: + * Host lock or EH context. * - * LOCKING: - * Host lock or EH context. + * RETURNS: + * Pointer to the next link. */ -struct ata_link *__ata_port_next_link(struct ata_port *ap, - struct ata_link *link, bool dev_only) +struct ata_link *ata_link_next(struct ata_link *link, struct ata_port *ap, + enum ata_link_iter_mode mode) { + BUG_ON(mode != ATA_LITER_EDGE && + mode != ATA_LITER_PMP_FIRST && mode != ATA_LITER_HOST_FIRST); + /* NULL link indicates start of iteration */ - if (!link) { - if (dev_only && sata_pmp_attached(ap)) - return ap->pmp_link; - return &ap->link; - } + if (!link) + switch (mode) { + case ATA_LITER_EDGE: + case ATA_LITER_PMP_FIRST: + if (sata_pmp_attached(ap)) + return ap->pmp_link; + /* fall through */ + case ATA_LITER_HOST_FIRST: + return &ap->link; + } - /* we just iterated over the host master link, what's next? */ - if (link == &ap->link) { - if (!sata_pmp_attached(ap)) { - if (unlikely(ap->slave_link) && !dev_only) + /* we just iterated over the host link, what's next? */ + if (link == &ap->link) + switch (mode) { + case ATA_LITER_HOST_FIRST: + if (sata_pmp_attached(ap)) + return ap->pmp_link; + /* fall through */ + case ATA_LITER_PMP_FIRST: + if (unlikely(ap->slave_link)) return ap->slave_link; + /* fall through */ + case ATA_LITER_EDGE: return NULL; } - return ap->pmp_link; - } /* slave_link excludes PMP */ if (unlikely(link == ap->slave_link)) return NULL; - /* iterate to the next PMP link */ + /* we were over a PMP link */ if (++link < ap->pmp_link + ap->nr_pmp_links) return link; + + if (mode == ATA_LITER_PMP_FIRST) + return &ap->link; + return NULL; } +/** + * ata_dev_next - device iteration helper + * @dev: the previous device, NULL to start + * @link: ATA link containing devices to iterate + * @mode: iteration mode, one of ATA_DITER_* + * + * LOCKING: + * Host lock or EH context. + * + * RETURNS: + * Pointer to the next device. + */ +struct ata_device *ata_dev_next(struct ata_device *dev, struct ata_link *link, + enum ata_dev_iter_mode mode) +{ + BUG_ON(mode != ATA_DITER_ENABLED && mode != ATA_DITER_ENABLED_REVERSE && + mode != ATA_DITER_ALL && mode != ATA_DITER_ALL_REVERSE); + + /* NULL dev indicates start of iteration */ + if (!dev) + switch (mode) { + case ATA_DITER_ENABLED: + case ATA_DITER_ALL: + dev = link->device; + goto check; + case ATA_DITER_ENABLED_REVERSE: + case ATA_DITER_ALL_REVERSE: + dev = link->device + ata_link_max_devices(link) - 1; + goto check; + } + + next: + /* move to the next one */ + switch (mode) { + case ATA_DITER_ENABLED: + case ATA_DITER_ALL: + if (++dev < link->device + ata_link_max_devices(link)) + goto check; + return NULL; + case ATA_DITER_ENABLED_REVERSE: + case ATA_DITER_ALL_REVERSE: + if (--dev >= link->device) + goto check; + return NULL; + } + + check: + if ((mode == ATA_DITER_ENABLED || mode == ATA_DITER_ENABLED_REVERSE) && + !ata_dev_enabled(dev)) + goto next; + return dev; +} + /** * ata_dev_phys_link - find physical link for a device * @dev: ATA device to look up physical link for @@ -1107,8 +1183,8 @@ static void ata_lpm_enable(struct ata_host *host) for (i = 0; i < host->n_ports; i++) { ap = host->ports[i]; - ata_port_for_each_link(link, ap) { - ata_link_for_each_dev(dev, link) + ata_for_each_link(link, ap, EDGE) { + ata_for_each_dev(dev, link, ALL) ata_dev_disable_pm(dev); } } @@ -2594,11 +2670,11 @@ int ata_bus_probe(struct ata_port *ap) ata_port_probe(ap); - ata_link_for_each_dev(dev, &ap->link) + ata_for_each_dev(dev, &ap->link, ALL) tries[dev->devno] = ATA_PROBE_MAX_TRIES; retry: - ata_link_for_each_dev(dev, &ap->link) { + ata_for_each_dev(dev, &ap->link, ALL) { /* If we issue an SRST then an ATA drive (not ATAPI) * may change configuration and be in PIO0 timing. If * we do a hard reset (or are coming from power on) @@ -2620,7 +2696,7 @@ int ata_bus_probe(struct ata_port *ap) /* reset and determine device classes */ ap->ops->phy_reset(ap); - ata_link_for_each_dev(dev, &ap->link) { + ata_for_each_dev(dev, &ap->link, ALL) { if (!(ap->flags & ATA_FLAG_DISABLED) && dev->class != ATA_DEV_UNKNOWN) classes[dev->devno] = dev->class; @@ -2636,7 +2712,7 @@ int ata_bus_probe(struct ata_port *ap) specific sequence bass-ackwards so that PDIAG- is released by the slave device */ - ata_link_for_each_dev_reverse(dev, &ap->link) { + ata_for_each_dev(dev, &ap->link, ALL_REVERSE) { if (tries[dev->devno]) dev->class = classes[dev->devno]; @@ -2653,24 +2729,19 @@ int ata_bus_probe(struct ata_port *ap) if (ap->ops->cable_detect) ap->cbl = ap->ops->cable_detect(ap); - /* We may have SATA bridge glue hiding here irrespective of the - reported cable types and sensed types */ - ata_link_for_each_dev(dev, &ap->link) { - if (!ata_dev_enabled(dev)) - continue; - /* SATA drives indicate we have a bridge. We don't know which - end of the link the bridge is which is a problem */ + /* We may have SATA bridge glue hiding here irrespective of + * the reported cable types and sensed types. When SATA + * drives indicate we have a bridge, we don't know which end + * of the link the bridge is which is a problem. + */ + ata_for_each_dev(dev, &ap->link, ENABLED) if (ata_id_is_sata(dev->id)) ap->cbl = ATA_CBL_SATA; - } /* After the identify sequence we can now set up the devices. We do this in the normal order so that the user doesn't get confused */ - ata_link_for_each_dev(dev, &ap->link) { - if (!ata_dev_enabled(dev)) - continue; - + ata_for_each_dev(dev, &ap->link, ENABLED) { ap->link.eh_context.i.flags |= ATA_EHI_PRINTINFO; rc = ata_dev_configure(dev); ap->link.eh_context.i.flags &= ~ATA_EHI_PRINTINFO; @@ -2683,9 +2754,8 @@ int ata_bus_probe(struct ata_port *ap) if (rc) goto fail; - ata_link_for_each_dev(dev, &ap->link) - if (ata_dev_enabled(dev)) - return 0; + ata_for_each_dev(dev, &ap->link, ENABLED) + return 0; /* no device present, disable port */ ata_port_disable(ap); @@ -3331,13 +3401,10 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) int rc = 0, used_dma = 0, found = 0; /* step 1: calculate xfer_mask */ - ata_link_for_each_dev(dev, link) { + ata_for_each_dev(dev, link, ENABLED) { unsigned long pio_mask, dma_mask; unsigned int mode_mask; - if (!ata_dev_enabled(dev)) - continue; - mode_mask = ATA_DMA_MASK_ATA; if (dev->class == ATA_DEV_ATAPI) mode_mask = ATA_DMA_MASK_ATAPI; @@ -3366,10 +3433,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) goto out; /* step 2: always set host PIO timings */ - ata_link_for_each_dev(dev, link) { - if (!ata_dev_enabled(dev)) - continue; - + ata_for_each_dev(dev, link, ENABLED) { if (dev->pio_mode == 0xff) { ata_dev_printk(dev, KERN_WARNING, "no PIO support\n"); rc = -EINVAL; @@ -3383,8 +3447,8 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) } /* step 3: set host DMA timings */ - ata_link_for_each_dev(dev, link) { - if (!ata_dev_enabled(dev) || !ata_dma_enabled(dev)) + ata_for_each_dev(dev, link, ENABLED) { + if (!ata_dma_enabled(dev)) continue; dev->xfer_mode = dev->dma_mode; @@ -3394,11 +3458,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) } /* step 4: update devices' xfer mode */ - ata_link_for_each_dev(dev, link) { - /* don't update suspended devices' xfer mode */ - if (!ata_dev_enabled(dev)) - continue; - + ata_for_each_dev(dev, link, ENABLED) { rc = ata_dev_set_mode(dev); if (rc) goto out; @@ -4263,9 +4323,9 @@ static int cable_is_40wire(struct ata_port *ap) * - if you have a non detect capable drive you don't want it * to colour the choice */ - ata_port_for_each_link(link, ap) { - ata_link_for_each_dev(dev, link) { - if (ata_dev_enabled(dev) && !ata_is_40wire(dev)) + ata_for_each_link(link, ap, EDGE) { + ata_for_each_dev(dev, link, ENABLED) { + if (!ata_is_40wire(dev)) return 0; } } @@ -5218,7 +5278,7 @@ static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg, } ap->pflags |= ATA_PFLAG_PM_PENDING; - __ata_port_for_each_link(link, ap) { + ata_for_each_link(link, ap, HOST_FIRST) { link->eh_info.action |= action; link->eh_info.flags |= ehi_flags; } @@ -6063,9 +6123,9 @@ static void ata_port_detach(struct ata_port *ap) /* EH is now guaranteed to see UNLOADING - EH context belongs * to us. Restore SControl and disable all existing devices. */ - __ata_port_for_each_link(link, ap) { + ata_for_each_link(link, ap, HOST_FIRST) { sata_scr_write(link, SCR_CONTROL, link->saved_scontrol & 0xff0); - ata_link_for_each_dev(dev, link) + ata_for_each_dev(dev, link, ALL) ata_dev_disable(dev); } @@ -6528,7 +6588,8 @@ EXPORT_SYMBOL_GPL(ata_base_port_ops); EXPORT_SYMBOL_GPL(sata_port_ops); EXPORT_SYMBOL_GPL(ata_dummy_port_ops); EXPORT_SYMBOL_GPL(ata_dummy_port_info); -EXPORT_SYMBOL_GPL(__ata_port_next_link); +EXPORT_SYMBOL_GPL(ata_link_next); +EXPORT_SYMBOL_GPL(ata_dev_next); EXPORT_SYMBOL_GPL(ata_std_bios_param); EXPORT_SYMBOL_GPL(ata_host_init); EXPORT_SYMBOL_GPL(ata_host_alloc); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 32da9a93ce44..d673f3712bdc 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -422,7 +422,7 @@ static void ata_eh_clear_action(struct ata_link *link, struct ata_device *dev, if (!dev) { ehi->action &= ~action; - ata_link_for_each_dev(tdev, link) + ata_for_each_dev(tdev, link, ALL) ehi->dev_action[tdev->devno] &= ~action; } else { /* doesn't make sense for port-wide EH actions */ @@ -430,7 +430,7 @@ static void ata_eh_clear_action(struct ata_link *link, struct ata_device *dev, /* break ehi->action into ehi->dev_action */ if (ehi->action & action) { - ata_link_for_each_dev(tdev, link) + ata_for_each_dev(tdev, link, ALL) ehi->dev_action[tdev->devno] |= ehi->action & action; ehi->action &= ~action; @@ -592,7 +592,7 @@ void ata_scsi_error(struct Scsi_Host *host) /* fetch & clear EH info */ spin_lock_irqsave(ap->lock, flags); - __ata_port_for_each_link(link, ap) { + ata_for_each_link(link, ap, HOST_FIRST) { struct ata_eh_context *ehc = &link->eh_context; struct ata_device *dev; @@ -600,12 +600,9 @@ void ata_scsi_error(struct Scsi_Host *host) link->eh_context.i = link->eh_info; memset(&link->eh_info, 0, sizeof(link->eh_info)); - ata_link_for_each_dev(dev, link) { + ata_for_each_dev(dev, link, ENABLED) { int devno = dev->devno; - if (!ata_dev_enabled(dev)) - continue; - ehc->saved_xfer_mode[devno] = dev->xfer_mode; if (ata_ncq_enabled(dev)) ehc->saved_ncq_enabled |= 1 << devno; @@ -644,7 +641,7 @@ void ata_scsi_error(struct Scsi_Host *host) } /* this run is complete, make sure EH info is clear */ - __ata_port_for_each_link(link, ap) + ata_for_each_link(link, ap, HOST_FIRST) memset(&link->eh_info, 0, sizeof(link->eh_info)); /* Clear host_eh_scheduled while holding ap->lock such @@ -1025,7 +1022,7 @@ int sata_async_notification(struct ata_port *ap) struct ata_link *link; /* check and notify ATAPI AN */ - ata_port_for_each_link(link, ap) { + ata_for_each_link(link, ap, EDGE) { if (!(sntf & (1 << link->pmp))) continue; @@ -2005,7 +2002,7 @@ void ata_eh_autopsy(struct ata_port *ap) { struct ata_link *link; - ata_port_for_each_link(link, ap) + ata_for_each_link(link, ap, EDGE) ata_eh_link_autopsy(link); /* Handle the frigging slave link. Autopsy is done similarly @@ -2219,7 +2216,7 @@ void ata_eh_report(struct ata_port *ap) { struct ata_link *link; - __ata_port_for_each_link(link, ap) + ata_for_each_link(link, ap, HOST_FIRST) ata_eh_link_report(link); } @@ -2230,7 +2227,7 @@ static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset, struct ata_device *dev; if (clear_classes) - ata_link_for_each_dev(dev, link) + ata_for_each_dev(dev, link, ALL) classes[dev->devno] = ATA_DEV_UNKNOWN; return reset(link, classes, deadline); @@ -2294,7 +2291,7 @@ int ata_eh_reset(struct ata_link *link, int classify, ata_eh_about_to_do(link, NULL, ATA_EH_RESET); - ata_link_for_each_dev(dev, link) { + ata_for_each_dev(dev, link, ALL) { /* If we issue an SRST then an ATA drive (not ATAPI) * may change configuration and be in PIO0 timing. If * we do a hard reset (or are coming from power on) @@ -2355,7 +2352,7 @@ int ata_eh_reset(struct ata_link *link, int classify, "port disabled. ignoring.\n"); ehc->i.action &= ~ATA_EH_RESET; - ata_link_for_each_dev(dev, link) + ata_for_each_dev(dev, link, ALL) classes[dev->devno] = ATA_DEV_NONE; rc = 0; @@ -2369,7 +2366,7 @@ int ata_eh_reset(struct ata_link *link, int classify, * bang classes and return. */ if (reset && !(ehc->i.action & ATA_EH_RESET)) { - ata_link_for_each_dev(dev, link) + ata_for_each_dev(dev, link, ALL) classes[dev->devno] = ATA_DEV_NONE; rc = 0; goto out; @@ -2454,7 +2451,7 @@ int ata_eh_reset(struct ata_link *link, int classify, /* * Post-reset processing */ - ata_link_for_each_dev(dev, link) { + ata_for_each_dev(dev, link, ALL) { /* After the reset, the device state is PIO 0 and the * controller state is undefined. Reset also wakes up * drives from sleeping mode. @@ -2510,7 +2507,7 @@ int ata_eh_reset(struct ata_link *link, int classify, * can be reliably detected and retried. */ nr_unknown = 0; - ata_link_for_each_dev(dev, link) { + ata_for_each_dev(dev, link, ALL) { /* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */ if (classes[dev->devno] == ATA_DEV_UNKNOWN) { classes[dev->devno] = ATA_DEV_NONE; @@ -2619,8 +2616,8 @@ static inline void ata_eh_pull_park_action(struct ata_port *ap) spin_lock_irqsave(ap->lock, flags); INIT_COMPLETION(ap->park_req_pending); - ata_port_for_each_link(link, ap) { - ata_link_for_each_dev(dev, link) { + ata_for_each_link(link, ap, EDGE) { + ata_for_each_dev(dev, link, ALL) { struct ata_eh_info *ehi = &link->eh_info; link->eh_context.i.dev_action[dev->devno] |= @@ -2675,7 +2672,7 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, * be done backwards such that PDIAG- is released by the slave * device before the master device is identified. */ - ata_link_for_each_dev_reverse(dev, link) { + ata_for_each_dev(dev, link, ALL_REVERSE) { unsigned int action = ata_eh_dev_action(dev); unsigned int readid_flags = 0; @@ -2744,7 +2741,7 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, /* Configure new devices forward such that user doesn't see * device detection messages backwards. */ - ata_link_for_each_dev(dev, link) { + ata_for_each_dev(dev, link, ALL) { if (!(new_mask & (1 << dev->devno)) || dev->class == ATA_DEV_PMP) continue; @@ -2793,10 +2790,7 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) int rc; /* if data transfer is verified, clear DUBIOUS_XFER on ering top */ - ata_link_for_each_dev(dev, link) { - if (!ata_dev_enabled(dev)) - continue; - + ata_for_each_dev(dev, link, ENABLED) { if (!(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) { struct ata_ering_entry *ent; @@ -2813,14 +2807,11 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) rc = ata_do_set_mode(link, r_failed_dev); /* if transfer mode has changed, set DUBIOUS_XFER on device */ - ata_link_for_each_dev(dev, link) { + ata_for_each_dev(dev, link, ENABLED) { struct ata_eh_context *ehc = &link->eh_context; u8 saved_xfer_mode = ehc->saved_xfer_mode[dev->devno]; u8 saved_ncq = !!(ehc->saved_ncq_enabled & (1 << dev->devno)); - if (!ata_dev_enabled(dev)) - continue; - if (dev->xfer_mode != saved_xfer_mode || ata_ncq_enabled(dev) != saved_ncq) dev->flags |= ATA_DFLAG_DUBIOUS_XFER; @@ -2881,9 +2872,8 @@ static int ata_link_nr_enabled(struct ata_link *link) struct ata_device *dev; int cnt = 0; - ata_link_for_each_dev(dev, link) - if (ata_dev_enabled(dev)) - cnt++; + ata_for_each_dev(dev, link, ENABLED) + cnt++; return cnt; } @@ -2892,7 +2882,7 @@ static int ata_link_nr_vacant(struct ata_link *link) struct ata_device *dev; int cnt = 0; - ata_link_for_each_dev(dev, link) + ata_for_each_dev(dev, link, ALL) if (dev->class == ATA_DEV_UNKNOWN) cnt++; return cnt; @@ -2918,7 +2908,7 @@ static int ata_eh_skip_recovery(struct ata_link *link) return 0; /* skip if class codes for all vacant slots are ATA_DEV_NONE */ - ata_link_for_each_dev(dev, link) { + ata_for_each_dev(dev, link, ALL) { if (dev->class == ATA_DEV_UNKNOWN && ehc->classes[dev->devno] != ATA_DEV_NONE) return 0; @@ -3026,7 +3016,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, DPRINTK("ENTER\n"); /* prep for recovery */ - ata_port_for_each_link(link, ap) { + ata_for_each_link(link, ap, EDGE) { struct ata_eh_context *ehc = &link->eh_context; /* re-enable link? */ @@ -3038,7 +3028,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, ata_eh_done(link, NULL, ATA_EH_ENABLE_LINK); } - ata_link_for_each_dev(dev, link) { + ata_for_each_dev(dev, link, ALL) { if (link->flags & ATA_LFLAG_NO_RETRY) ehc->tries[dev->devno] = 1; else @@ -3068,19 +3058,19 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, goto out; /* prep for EH */ - ata_port_for_each_link(link, ap) { + ata_for_each_link(link, ap, EDGE) { struct ata_eh_context *ehc = &link->eh_context; /* skip EH if possible. */ if (ata_eh_skip_recovery(link)) ehc->i.action = 0; - ata_link_for_each_dev(dev, link) + ata_for_each_dev(dev, link, ALL) ehc->classes[dev->devno] = ATA_DEV_UNKNOWN; } /* reset */ - ata_port_for_each_link(link, ap) { + ata_for_each_link(link, ap, EDGE) { struct ata_eh_context *ehc = &link->eh_context; if (!(ehc->i.action & ATA_EH_RESET)) @@ -3105,8 +3095,8 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, ata_eh_pull_park_action(ap); deadline = jiffies; - ata_port_for_each_link(link, ap) { - ata_link_for_each_dev(dev, link) { + ata_for_each_link(link, ap, EDGE) { + ata_for_each_dev(dev, link, ALL) { struct ata_eh_context *ehc = &link->eh_context; unsigned long tmp; @@ -3134,8 +3124,8 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, deadline = wait_for_completion_timeout(&ap->park_req_pending, deadline - now); } while (deadline); - ata_port_for_each_link(link, ap) { - ata_link_for_each_dev(dev, link) { + ata_for_each_link(link, ap, EDGE) { + ata_for_each_dev(dev, link, ALL) { if (!(link->eh_context.unloaded_mask & (1 << dev->devno))) continue; @@ -3146,7 +3136,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, } /* the rest */ - ata_port_for_each_link(link, ap) { + ata_for_each_link(link, ap, EDGE) { struct ata_eh_context *ehc = &link->eh_context; /* revalidate existing devices and attach new ones */ @@ -3172,7 +3162,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, * disrupting the current users of the device. */ if (ehc->i.flags & ATA_EHI_DID_RESET) { - ata_link_for_each_dev(dev, link) { + ata_for_each_dev(dev, link, ALL) { if (dev->class != ATA_DEV_ATAPI) continue; rc = atapi_eh_clear_ua(dev); @@ -3183,7 +3173,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, /* configure link power saving */ if (ehc->i.action & ATA_EH_LPM) - ata_link_for_each_dev(dev, link) + ata_for_each_dev(dev, link, ALL) ata_dev_enable_pm(dev, ap->pm_policy); /* this link is okay now */ @@ -3288,7 +3278,7 @@ void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, rc = ata_eh_recover(ap, prereset, softreset, hardreset, postreset, NULL); if (rc) { - ata_link_for_each_dev(dev, &ap->link) + ata_for_each_dev(dev, &ap->link, ALL) ata_dev_disable(dev); } diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index b65db309c181..98ca07a2db87 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -321,7 +321,7 @@ static void sata_pmp_quirks(struct ata_port *ap) if (vendor == 0x1095 && devid == 0x3726) { /* sil3726 quirks */ - ata_port_for_each_link(link, ap) { + ata_for_each_link(link, ap, EDGE) { /* Class code report is unreliable and SRST * times out under certain configurations. */ @@ -336,7 +336,7 @@ static void sata_pmp_quirks(struct ata_port *ap) } } else if (vendor == 0x1095 && devid == 0x4723) { /* sil4723 quirks */ - ata_port_for_each_link(link, ap) { + ata_for_each_link(link, ap, EDGE) { /* class code report is unreliable */ if (link->pmp < 2) link->flags |= ATA_LFLAG_ASSUME_ATA; @@ -348,7 +348,7 @@ static void sata_pmp_quirks(struct ata_port *ap) } } else if (vendor == 0x1095 && devid == 0x4726) { /* sil4726 quirks */ - ata_port_for_each_link(link, ap) { + ata_for_each_link(link, ap, EDGE) { /* Class code report is unreliable and SRST * times out under certain configurations. * Config device can be at port 0 or 5 and @@ -450,7 +450,7 @@ int sata_pmp_attach(struct ata_device *dev) if (ap->ops->pmp_attach) ap->ops->pmp_attach(ap); - ata_port_for_each_link(tlink, ap) + ata_for_each_link(tlink, ap, EDGE) sata_link_init_spd(tlink); ata_acpi_associate_sata_port(ap); @@ -487,7 +487,7 @@ static void sata_pmp_detach(struct ata_device *dev) if (ap->ops->pmp_detach) ap->ops->pmp_detach(ap); - ata_port_for_each_link(tlink, ap) + ata_for_each_link(tlink, ap, EDGE) ata_eh_detach_dev(tlink->device); spin_lock_irqsave(ap->lock, flags); @@ -700,7 +700,7 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap, } /* PMP is reset, SErrors cannot be trusted, scan all */ - ata_port_for_each_link(tlink, ap) { + ata_for_each_link(tlink, ap, EDGE) { struct ata_eh_context *ehc = &tlink->eh_context; ehc->i.probe_mask |= ATA_ALL_DEVICES; @@ -768,7 +768,7 @@ static int sata_pmp_eh_handle_disabled_links(struct ata_port *ap) spin_lock_irqsave(ap->lock, flags); - ata_port_for_each_link(link, ap) { + ata_for_each_link(link, ap, EDGE) { if (!(link->flags & ATA_LFLAG_DISABLED)) continue; @@ -852,7 +852,7 @@ static int sata_pmp_eh_recover(struct ata_port *ap) int cnt, rc; pmp_tries = ATA_EH_PMP_TRIES; - ata_port_for_each_link(link, ap) + ata_for_each_link(link, ap, EDGE) link_tries[link->pmp] = ATA_EH_PMP_LINK_TRIES; retry: @@ -861,7 +861,7 @@ static int sata_pmp_eh_recover(struct ata_port *ap) rc = ata_eh_recover(ap, ops->prereset, ops->softreset, ops->hardreset, ops->postreset, NULL); if (rc) { - ata_link_for_each_dev(dev, &ap->link) + ata_for_each_dev(dev, &ap->link, ALL) ata_dev_disable(dev); return rc; } @@ -870,7 +870,7 @@ static int sata_pmp_eh_recover(struct ata_port *ap) return 0; /* new PMP online */ - ata_port_for_each_link(link, ap) + ata_for_each_link(link, ap, EDGE) link_tries[link->pmp] = ATA_EH_PMP_LINK_TRIES; /* fall through */ @@ -942,7 +942,7 @@ static int sata_pmp_eh_recover(struct ata_port *ap) } cnt = 0; - ata_port_for_each_link(link, ap) { + ata_for_each_link(link, ap, EDGE) { if (!(gscr_error & (1 << link->pmp))) continue; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 47c7afcb36f2..0b2e14f67655 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3229,12 +3229,12 @@ void ata_scsi_scan_host(struct ata_port *ap, int sync) return; repeat: - ata_port_for_each_link(link, ap) { - ata_link_for_each_dev(dev, link) { + ata_for_each_link(link, ap, EDGE) { + ata_for_each_dev(dev, link, ENABLED) { struct scsi_device *sdev; int channel = 0, id = 0; - if (!ata_dev_enabled(dev) || dev->sdev) + if (dev->sdev) continue; if (ata_is_host_link(link)) @@ -3255,9 +3255,9 @@ void ata_scsi_scan_host(struct ata_port *ap, int sync) * failure occurred, scan would have failed silently. Check * whether all devices are attached. */ - ata_port_for_each_link(link, ap) { - ata_link_for_each_dev(dev, link) { - if (ata_dev_enabled(dev) && !dev->sdev) + ata_for_each_link(link, ap, EDGE) { + ata_for_each_dev(dev, link, ENABLED) { + if (!dev->sdev) goto exit_loop; } } @@ -3381,7 +3381,7 @@ static void ata_scsi_handle_link_detach(struct ata_link *link) struct ata_port *ap = link->ap; struct ata_device *dev; - ata_link_for_each_dev(dev, link) { + ata_for_each_dev(dev, link, ALL) { unsigned long flags; if (!(dev->flags & ATA_DFLAG_DETACHED)) @@ -3496,7 +3496,7 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, if (devno == SCAN_WILD_CARD) { struct ata_link *link; - ata_port_for_each_link(link, ap) { + ata_for_each_link(link, ap, EDGE) { struct ata_eh_info *ehi = &link->eh_info; ehi->probe_mask |= ATA_ALL_DEVICES; ehi->action |= ATA_EH_RESET; @@ -3544,11 +3544,11 @@ void ata_scsi_dev_rescan(struct work_struct *work) spin_lock_irqsave(ap->lock, flags); - ata_port_for_each_link(link, ap) { - ata_link_for_each_dev(dev, link) { + ata_for_each_link(link, ap, EDGE) { + ata_for_each_dev(dev, link, ENABLED) { struct scsi_device *sdev = dev->sdev; - if (!ata_dev_enabled(dev) || !sdev) + if (!sdev) continue; if (scsi_device_get(sdev)) continue; diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index 860ede526282..f828a29d7756 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -465,24 +465,22 @@ static int it821x_smart_set_mode(struct ata_link *link, struct ata_device **unus { struct ata_device *dev; - ata_link_for_each_dev(dev, link) { - if (ata_dev_enabled(dev)) { - /* We don't really care */ - dev->pio_mode = XFER_PIO_0; - dev->dma_mode = XFER_MW_DMA_0; - /* We do need the right mode information for DMA or PIO - and this comes from the current configuration flags */ - if (ata_id_has_dma(dev->id)) { - ata_dev_printk(dev, KERN_INFO, "configured for DMA\n"); - dev->xfer_mode = XFER_MW_DMA_0; - dev->xfer_shift = ATA_SHIFT_MWDMA; - dev->flags &= ~ATA_DFLAG_PIO; - } else { - ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); - dev->xfer_mode = XFER_PIO_0; - dev->xfer_shift = ATA_SHIFT_PIO; - dev->flags |= ATA_DFLAG_PIO; - } + ata_for_each_dev(dev, link, ENABLED) { + /* We don't really care */ + dev->pio_mode = XFER_PIO_0; + dev->dma_mode = XFER_MW_DMA_0; + /* We do need the right mode information for DMA or PIO + and this comes from the current configuration flags */ + if (ata_id_has_dma(dev->id)) { + ata_dev_printk(dev, KERN_INFO, "configured for DMA\n"); + dev->xfer_mode = XFER_MW_DMA_0; + dev->xfer_shift = ATA_SHIFT_MWDMA; + dev->flags &= ~ATA_DFLAG_PIO; + } else { + ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; } } return 0; diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c index 2014253f6c88..b173c157ab00 100644 --- a/drivers/ata/pata_ixp4xx_cf.c +++ b/drivers/ata/pata_ixp4xx_cf.c @@ -30,14 +30,12 @@ static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error) { struct ata_device *dev; - ata_link_for_each_dev(dev, link) { - if (ata_dev_enabled(dev)) { - ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n"); - dev->pio_mode = XFER_PIO_0; - dev->xfer_mode = XFER_PIO_0; - dev->xfer_shift = ATA_SHIFT_PIO; - dev->flags |= ATA_DFLAG_PIO; - } + ata_for_each_dev(dev, link, ENABLED) { + ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n"); + dev->pio_mode = XFER_PIO_0; + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; } return 0; } diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 930c2208640b..cbd98c16eea4 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -194,15 +194,12 @@ static int legacy_set_mode(struct ata_link *link, struct ata_device **unused) { struct ata_device *dev; - ata_link_for_each_dev(dev, link) { - if (ata_dev_enabled(dev)) { - ata_dev_printk(dev, KERN_INFO, - "configured for PIO\n"); - dev->pio_mode = XFER_PIO_0; - dev->xfer_mode = XFER_PIO_0; - dev->xfer_shift = ATA_SHIFT_PIO; - dev->flags |= ATA_DFLAG_PIO; - } + ata_for_each_dev(dev, link, ENABLED) { + ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); + dev->pio_mode = XFER_PIO_0; + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; } return 0; } @@ -1028,7 +1025,7 @@ static __init int legacy_init_one(struct legacy_probe *probe) /* Nothing found means we drop the port as its probably not there */ ret = -ENODEV; - ata_link_for_each_dev(dev, &ap->link) { + ata_for_each_dev(dev, &ap->link, ALL) { if (!ata_dev_absent(dev)) { legacy_host[probe->slot] = host; ld->platform_dev = pdev; diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index 0e1c2c1134d3..d43e8be96b88 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -406,23 +406,20 @@ static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed if (rc < 0) return rc; - ata_link_for_each_dev(dev, link) { - if (ata_dev_enabled(dev)) { - - pdc2027x_set_piomode(ap, dev); - - /* - * Enable prefetch if the device support PIO only. - */ - if (dev->xfer_shift == ATA_SHIFT_PIO) { - u32 ctcr1 = ioread32(dev_mmio(ap, dev, PDC_CTCR1)); - ctcr1 |= (1 << 25); - iowrite32(ctcr1, dev_mmio(ap, dev, PDC_CTCR1)); - - PDPRINTK("Turn on prefetch\n"); - } else { - pdc2027x_set_dmamode(ap, dev); - } + ata_for_each_dev(dev, link, ENABLED) { + pdc2027x_set_piomode(ap, dev); + + /* + * Enable prefetch if the device support PIO only. + */ + if (dev->xfer_shift == ATA_SHIFT_PIO) { + u32 ctcr1 = ioread32(dev_mmio(ap, dev, PDC_CTCR1)); + ctcr1 |= (1 << 25); + iowrite32(ctcr1, dev_mmio(ap, dev, PDC_CTCR1)); + + PDPRINTK("Turn on prefetch\n"); + } else { + pdc2027x_set_dmamode(ap, dev); } } return 0; diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c index 77e4e3b17f54..6afa07a37648 100644 --- a/drivers/ata/pata_platform.c +++ b/drivers/ata/pata_platform.c @@ -34,14 +34,12 @@ static int pata_platform_set_mode(struct ata_link *link, struct ata_device **unu { struct ata_device *dev; - ata_link_for_each_dev(dev, link) { - if (ata_dev_enabled(dev)) { - /* We don't really care */ - dev->pio_mode = dev->xfer_mode = XFER_PIO_0; - dev->xfer_shift = ATA_SHIFT_PIO; - dev->flags |= ATA_DFLAG_PIO; - ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); - } + ata_for_each_dev(dev, link, ENABLED) { + /* We don't really care */ + dev->pio_mode = dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); } return 0; } diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c index 7dfd1f3f6f3a..46d6bc1bf1e9 100644 --- a/drivers/ata/pata_rz1000.c +++ b/drivers/ata/pata_rz1000.c @@ -38,15 +38,13 @@ static int rz1000_set_mode(struct ata_link *link, struct ata_device **unused) { struct ata_device *dev; - ata_link_for_each_dev(dev, link) { - if (ata_dev_enabled(dev)) { - /* We don't really care */ - dev->pio_mode = XFER_PIO_0; - dev->xfer_mode = XFER_PIO_0; - dev->xfer_shift = ATA_SHIFT_PIO; - dev->flags |= ATA_DFLAG_PIO; - ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); - } + ata_for_each_dev(dev, link, ENABLED) { + /* We don't really care */ + dev->pio_mode = XFER_PIO_0; + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); } return 0; } diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 031d7b7dee34..177370921774 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -278,7 +278,7 @@ static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed) if (rc) return rc; - ata_link_for_each_dev(dev, link) { + ata_for_each_dev(dev, link, ALL) { if (!ata_dev_enabled(dev)) dev_mode[dev->devno] = 0; /* PIO0/1/2 */ else if (dev->flags & ATA_DFLAG_PIO) diff --git a/include/linux/libata.h b/include/linux/libata.h index ed3f26eb5df1..3b2a0c6444ee 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1285,26 +1285,62 @@ static inline int ata_link_active(struct ata_link *link) return ata_tag_valid(link->active_tag) || link->sactive; } -extern struct ata_link *__ata_port_next_link(struct ata_port *ap, - struct ata_link *link, - bool dev_only); - -#define __ata_port_for_each_link(link, ap) \ - for ((link) = __ata_port_next_link((ap), NULL, false); (link); \ - (link) = __ata_port_next_link((ap), (link), false)) - -#define ata_port_for_each_link(link, ap) \ - for ((link) = __ata_port_next_link((ap), NULL, true); (link); \ - (link) = __ata_port_next_link((ap), (link), true)) - -#define ata_link_for_each_dev(dev, link) \ - for ((dev) = (link)->device; \ - (dev) < (link)->device + ata_link_max_devices(link) || ((dev) = NULL); \ - (dev)++) - -#define ata_link_for_each_dev_reverse(dev, link) \ - for ((dev) = (link)->device + ata_link_max_devices(link) - 1; \ - (dev) >= (link)->device || ((dev) = NULL); (dev)--) +/* + * Iterators + * + * ATA_LITER_* constants are used to select link iteration mode and + * ATA_DITER_* device iteration mode. + * + * For a custom iteration directly using ata_{link|dev}_next(), if + * @link or @dev, respectively, is NULL, the first element is + * returned. @dev and @link can be any valid device or link and the + * next element according to the iteration mode will be returned. + * After the last element, NULL is returned. + */ +enum ata_link_iter_mode { + ATA_LITER_EDGE, /* if present, PMP links only; otherwise, + * host link. no slave link */ + ATA_LITER_HOST_FIRST, /* host link followed by PMP or slave links */ + ATA_LITER_PMP_FIRST, /* PMP links followed by host link, + * slave link still comes after host link */ +}; + +enum ata_dev_iter_mode { + ATA_DITER_ENABLED, + ATA_DITER_ENABLED_REVERSE, + ATA_DITER_ALL, + ATA_DITER_ALL_REVERSE, +}; + +extern struct ata_link *ata_link_next(struct ata_link *link, + struct ata_port *ap, + enum ata_link_iter_mode mode); + +extern struct ata_device *ata_dev_next(struct ata_device *dev, + struct ata_link *link, + enum ata_dev_iter_mode mode); + +/* + * Shortcut notation for iterations + * + * ata_for_each_link() iterates over each link of @ap according to + * @mode. @link points to the current link in the loop. @link is + * NULL after loop termination. ata_for_each_dev() works the same way + * except that it iterates over each device of @link. + * + * Note that the mode prefixes ATA_{L|D}ITER_ shouldn't need to be + * specified when using the following shorthand notations. Only the + * mode itself (EDGE, HOST_FIRST, ENABLED, etc...) should be + * specified. This not only increases brevity but also makes it + * impossible to use ATA_LITER_* for device iteration or vice-versa. + */ +#define ata_for_each_link(link, ap, mode) \ + for ((link) = ata_link_next(NULL, (ap), ATA_LITER_##mode); (link); \ + (link) = ata_link_next((link), (ap), ATA_LITER_##mode)) + +#define ata_for_each_dev(dev, link, mode) \ + for ((dev) = ata_dev_next(NULL, (link), ATA_DITER_##mode); (dev); \ + (dev) = ata_dev_next((dev), (link), ATA_DITER_##mode)) /** * ata_ncq_enabled - Test whether NCQ is enabled -- cgit v1.2.3 From ad74e4c18d0962397314460d0da312e72c8bd02d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Nov 2008 20:03:49 +0900 Subject: libata: when restoring SControl during detach do the PMP links first When restoring SControl during detach, PMP links should be handled first as changing SControl of the host link can affect SCR access of PMP links. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index ffd98e4e65b4..1ecc3cb0b722 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6123,7 +6123,7 @@ static void ata_port_detach(struct ata_port *ap) /* EH is now guaranteed to see UNLOADING - EH context belongs * to us. Restore SControl and disable all existing devices. */ - ata_for_each_link(link, ap, HOST_FIRST) { + ata_for_each_link(link, ap, PMP_FIRST) { sata_scr_write(link, SCR_CONTROL, link->saved_scontrol & 0xff0); ata_for_each_dev(dev, link, ALL) ata_dev_disable(dev); -- cgit v1.2.3 From ece180d1cfe5fa751eaa85bf796cf28b2150af15 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Nov 2008 20:04:37 +0900 Subject: libata: perform port detach in EH ata_port_detach() first made sure EH saw ATA_PFLAG_UNLOADING and then assumed EH context belongs to it and performed detach operation itself. However, UNLOADING doesn't disable all of EH and this could lead to problems including triggering WARN_ON()'s in EH path. This patch makes port detach behave more like other EH actions such that ata_port_detach() requests EH to detach and waits for completion. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 23 ++++------------------- drivers/ata/libata-eh.c | 32 +++++++++++++++++++++++++++++++- include/linux/libata.h | 3 ++- 3 files changed, 37 insertions(+), 21 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 1ecc3cb0b722..837fb60a6dcc 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6107,8 +6107,6 @@ int ata_host_activate(struct ata_host *host, int irq, static void ata_port_detach(struct ata_port *ap) { unsigned long flags; - struct ata_link *link; - struct ata_device *dev; if (!ap->ops->error_handler) goto skip_eh; @@ -6116,28 +6114,15 @@ static void ata_port_detach(struct ata_port *ap) /* tell EH we're leaving & flush EH */ spin_lock_irqsave(ap->lock, flags); ap->pflags |= ATA_PFLAG_UNLOADING; + ata_port_schedule_eh(ap); spin_unlock_irqrestore(ap->lock, flags); + /* wait till EH commits suicide */ ata_port_wait_eh(ap); - /* EH is now guaranteed to see UNLOADING - EH context belongs - * to us. Restore SControl and disable all existing devices. - */ - ata_for_each_link(link, ap, PMP_FIRST) { - sata_scr_write(link, SCR_CONTROL, link->saved_scontrol & 0xff0); - ata_for_each_dev(dev, link, ALL) - ata_dev_disable(dev); - } - - /* Final freeze & EH. All in-flight commands are aborted. EH - * will be skipped and retrials will be terminated with bad - * target. - */ - spin_lock_irqsave(ap->lock, flags); - ata_port_freeze(ap); /* won't be thawed */ - spin_unlock_irqrestore(ap->lock, flags); + /* it better be dead now */ + WARN_ON(!(ap->pflags & ATA_PFLAG_UNLOADED)); - ata_port_wait_eh(ap); cancel_rearming_delayed_work(&ap->hotplug_task); skip_eh: diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index d673f3712bdc..8147a8386370 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -491,6 +491,31 @@ enum blk_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) return ret; } +static void ata_eh_unload(struct ata_port *ap) +{ + struct ata_link *link; + struct ata_device *dev; + unsigned long flags; + + /* Restore SControl IPM and SPD for the next driver and + * disable attached devices. + */ + ata_for_each_link(link, ap, PMP_FIRST) { + sata_scr_write(link, SCR_CONTROL, link->saved_scontrol & 0xff0); + ata_for_each_dev(dev, link, ALL) + ata_dev_disable(dev); + } + + /* freeze and set UNLOADED */ + spin_lock_irqsave(ap->lock, flags); + + ata_port_freeze(ap); /* won't be thawed */ + ap->pflags &= ~ATA_PFLAG_EH_PENDING; /* clear pending from freeze */ + ap->pflags |= ATA_PFLAG_UNLOADED; + + spin_unlock_irqrestore(ap->lock, flags); +} + /** * ata_scsi_error - SCSI layer error handler callback * @host: SCSI host on which error occurred @@ -618,8 +643,13 @@ void ata_scsi_error(struct Scsi_Host *host) /* invoke EH, skip if unloading or suspended */ if (!(ap->pflags & (ATA_PFLAG_UNLOADING | ATA_PFLAG_SUSPENDED))) ap->ops->error_handler(ap); - else + else { + /* if unloading, commence suicide */ + if ((ap->pflags & ATA_PFLAG_UNLOADING) && + !(ap->pflags & ATA_PFLAG_UNLOADED)) + ata_eh_unload(ap); ata_eh_finish(ap); + } /* process port suspend request */ ata_eh_handle_port_suspend(ap); diff --git a/include/linux/libata.h b/include/linux/libata.h index 3b2a0c6444ee..3449de597eff 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -213,10 +213,11 @@ enum { ATA_PFLAG_FROZEN = (1 << 2), /* port is frozen */ ATA_PFLAG_RECOVERED = (1 << 3), /* recovery action performed */ ATA_PFLAG_LOADING = (1 << 4), /* boot/loading probe */ - ATA_PFLAG_UNLOADING = (1 << 5), /* module is unloading */ ATA_PFLAG_SCSI_HOTPLUG = (1 << 6), /* SCSI hotplug scheduled */ ATA_PFLAG_INITIALIZING = (1 << 7), /* being initialized, don't touch */ ATA_PFLAG_RESETTING = (1 << 8), /* reset in progress */ + ATA_PFLAG_UNLOADING = (1 << 9), /* driver is being unloaded */ + ATA_PFLAG_UNLOADED = (1 << 10), /* driver is unloaded */ ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */ ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */ -- cgit v1.2.3 From bd353ffdc9a355c89ef7e45e4833af5995a5015d Mon Sep 17 00:00:00 2001 From: Qinghuang Feng Date: Tue, 25 Nov 2008 11:37:19 -0500 Subject: [libata] Update kernel-doc comments to match source code Signed-off-by: Qinghuang Feng --- drivers/ata/libata-core.c | 1 - drivers/ata/pata_bf54x.c | 1 - drivers/ata/pata_legacy.c | 1 - drivers/ata/pata_oldpiix.c | 1 - drivers/ata/pata_pdc2027x.c | 2 -- drivers/ata/pata_radisys.c | 1 - drivers/ata/pata_scc.c | 1 - drivers/ata/pata_serverworks.c | 1 - drivers/ata/pata_sis.c | 1 - drivers/ata/sata_mv.c | 1 - 10 files changed, 11 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 837fb60a6dcc..c2f18ef74d37 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4732,7 +4732,6 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) /** * ata_qc_new_init - Request an available ATA command, and initialize it * @dev: Device from whom we request an available command structure - * @tag: command tag * * LOCKING: * None. diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index 1266924c11f9..1050fed96b2b 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -356,7 +356,6 @@ static void bfin_set_piomode(struct ata_port *ap, struct ata_device *adev) * bfin_set_dmamode - Initialize host controller PATA DMA timings * @ap: Port whose timings we are configuring * @adev: um - * @udma: udma mode, 0 - 6 * * Set UDMA mode for device. * diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index cbd98c16eea4..6c1d778b63a9 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -638,7 +638,6 @@ static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev) * qdi6580dp_set_piomode - PIO setup for dual channel * @ap: Port * @adev: Device - * @irq: interrupt line * * In dual channel mode the 6580 has one clock per channel and we have * to software clockswitch in qc_issue. diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index c0dbc46a348e..2c1a91c40c1a 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -116,7 +116,6 @@ static void oldpiix_set_piomode (struct ata_port *ap, struct ata_device *adev) * oldpiix_set_dmamode - Initialize host controller PATA DMA timings * @ap: Port whose timings we are configuring * @adev: Device to program - * @isich: True if the device is an ICH and has IOCFG registers * * Set MWDMA mode for device, in host controller PCI config space. * diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index d43e8be96b88..e94efccaa482 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -281,7 +281,6 @@ static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long * pdc2027x_set_piomode - Initialize host controller PATA PIO timings * @ap: Port to configure * @adev: um - * @pio: PIO mode, 0 - 4 * * Set PIO mode for device. * @@ -326,7 +325,6 @@ static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev) * pdc2027x_set_dmamode - Initialize host controller PATA UDMA timings * @ap: Port to configure * @adev: um - * @udma: udma mode, XFER_UDMA_0 to XFER_UDMA_6 * * Set UDMA mode for device. * diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index 0b0aa452de14..695d44ae52c6 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -81,7 +81,6 @@ static void radisys_set_piomode (struct ata_port *ap, struct ata_device *adev) * radisys_set_dmamode - Initialize host controller PATA DMA timings * @ap: Port whose timings we are configuring * @adev: Device to program - * @isich: True if the device is an ICH and has IOCFG registers * * Set MWDMA mode for device, in host controller PCI config space. * diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index cf3707e516a2..d447f1cb46ec 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -210,7 +210,6 @@ static void scc_set_piomode (struct ata_port *ap, struct ata_device *adev) * scc_set_dmamode - Initialize host controller PATA DMA timings * @ap: Port whose timings we are configuring * @adev: um - * @udma: udma mode, 0 - 6 * * Set UDMA mode for device. * diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 72e41c9f969b..8d2fd9dd40c7 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -138,7 +138,6 @@ static struct sv_cable_table cable_detect[] = { /** * serverworks_cable_detect - cable detection * @ap: ATA port - * @deadline: deadline jiffies for the operation * * Perform cable detection according to the device and subvendor * identifications diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index e4be55e047f6..27ceb42a774b 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -112,7 +112,6 @@ static int sis_133_cable_detect(struct ata_port *ap) /** * sis_66_cable_detect - check for 40/80 pin * @ap: Port - * @deadline: deadline jiffies for the operation * * Perform cable detection on the UDMA66, UDMA100 and early UDMA133 * SiS IDE controllers. diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 2b24ae58b52e..86918634a4c5 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1836,7 +1836,6 @@ static void mv_unexpected_intr(struct ata_port *ap, int edma_was_enabled) /** * mv_err_intr - Handle error interrupts on the port * @ap: ATA channel to manipulate - * @qc: affected command (non-NCQ), or NULL * * Most cases require a full reset of the chip's state machine, * which also performs a COMRESET. -- cgit v1.2.3 From 5ccfca974f3ce3c33be72f1fcb2b42747714ec79 Mon Sep 17 00:00:00 2001 From: Lubomir Bulej Date: Mon, 22 Dec 2008 11:35:22 +0100 Subject: libata: blacklist NCQ on OCZ CORE 2 SSD (resend) The patchlet below blacklists NCQ on OCZ CORE v2 SSD drive(s). Even though the drive advertises NCQ support with queue depth 1, it responds with all-zeroes FIS to NCQ commands which triggers ata error handling several times before the kernel decides to disable NCQ on the drive. Signed-off-by: Lubomir Bulej Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index c2f18ef74d37..fecca4223f8e 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4108,6 +4108,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ }, { "ST380817AS", "3.42", ATA_HORKAGE_NONCQ }, { "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ }, + { "OCZ CORE_SSD", "02.10104", ATA_HORKAGE_NONCQ }, /* Seagate NCQ + FLUSH CACHE firmware bug */ { "ST31500341AS", "SD15", ATA_HORKAGE_NONCQ | -- cgit v1.2.3 From 3c387730ef2639811306c631e820711a70b98c5d Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 10 Dec 2008 14:07:22 +0100 Subject: [libata] ata_piix: cleanup dmi strings checking Commit ATA: piix, fix pointer deref on suspend fixed a possible oops in an ugly manner. Use newly introduced dmi_match() to make the code pretty again. Signed-off-by: Jiri Slaby Cc: Alexandru Romanescu Cc: Tejun Heo Cc: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 21 +++++++-------------- 1 file changed, 7 insertions(+), 14 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index c11936e13dd3..5fdf1678d0cc 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1072,20 +1072,13 @@ static int piix_broken_suspend(void) * matching is necessary because dmi_system_id.matches is * limited to four entries. */ - if (dmi_get_system_info(DMI_SYS_VENDOR) && - dmi_get_system_info(DMI_PRODUCT_NAME) && - dmi_get_system_info(DMI_PRODUCT_VERSION) && - dmi_get_system_info(DMI_PRODUCT_SERIAL) && - dmi_get_system_info(DMI_BOARD_VENDOR) && - dmi_get_system_info(DMI_BOARD_NAME) && - dmi_get_system_info(DMI_BOARD_VERSION) && - !strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") && - !strcmp(dmi_get_system_info(DMI_PRODUCT_NAME), "000000") && - !strcmp(dmi_get_system_info(DMI_PRODUCT_VERSION), "000000") && - !strcmp(dmi_get_system_info(DMI_PRODUCT_SERIAL), "000000") && - !strcmp(dmi_get_system_info(DMI_BOARD_VENDOR), "TOSHIBA") && - !strcmp(dmi_get_system_info(DMI_BOARD_NAME), "Portable PC") && - !strcmp(dmi_get_system_info(DMI_BOARD_VERSION), "Version A0")) + if (dmi_match(DMI_SYS_VENDOR, "TOSHIBA") && + dmi_match(DMI_PRODUCT_NAME, "000000") && + dmi_match(DMI_PRODUCT_VERSION, "000000") && + dmi_match(DMI_PRODUCT_SERIAL, "000000") && + dmi_match(DMI_BOARD_VENDOR, "TOSHIBA") && + dmi_match(DMI_BOARD_NAME, "Portable PC") && + dmi_match(DMI_BOARD_VERSION, "Version A0")) return 1; return 0; -- cgit v1.2.3 From c7e324f1bd17b25fcdca33bdad01cf6eb8be4933 Mon Sep 17 00:00:00 2001 From: Robert Hancock Date: Wed, 24 Dec 2008 19:06:06 -0600 Subject: sata_sil: add Large Block Transfer support This implements support for the Large Block Transfer feature found in Silicon Image 311x controllers. This allows transferring bigger contiguous chunks of data from system memory and avoids the 64KB boundary restriction of standard SFF controllers. This is based on a patch from Jeff Garzik (from the sii-lbt branch of libata-dev) but includes a few bug fixes: Since the bmdma2 register does not implement the status bits, the original bmdma register must be used except where the bmdma2 register is required. As well the DMA boundary should be 31-bit instead of 32-bit since the top bit of the length field is still required for the PRD end-of-table flag. Signed-off-by: Robert Hancock Signed-off-by: Jeff Garzik --- drivers/ata/sata_sil.c | 96 ++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 94 insertions(+), 2 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 177370921774..564c142b03b0 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -46,7 +46,9 @@ #include #define DRV_NAME "sata_sil" -#define DRV_VERSION "2.3" +#define DRV_VERSION "2.4" + +#define SIL_DMA_BOUNDARY 0x7fffffffUL enum { SIL_MMIO_BAR = 5, @@ -118,6 +120,10 @@ static void sil_dev_config(struct ata_device *dev); static int sil_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); static int sil_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed); +static void sil_qc_prep(struct ata_queued_cmd *qc); +static void sil_bmdma_setup(struct ata_queued_cmd *qc); +static void sil_bmdma_start(struct ata_queued_cmd *qc); +static void sil_bmdma_stop(struct ata_queued_cmd *qc); static void sil_freeze(struct ata_port *ap); static void sil_thaw(struct ata_port *ap); @@ -167,13 +173,22 @@ static struct pci_driver sil_pci_driver = { }; static struct scsi_host_template sil_sht = { - ATA_BMDMA_SHT(DRV_NAME), + ATA_BASE_SHT(DRV_NAME), + /** These controllers support Large Block Transfer which allows + transfer chunks up to 2GB and which cross 64KB boundaries, + therefore the DMA limits are more relaxed than standard ATA SFF. */ + .dma_boundary = SIL_DMA_BOUNDARY, + .sg_tablesize = ATA_MAX_PRD }; static struct ata_port_operations sil_ops = { .inherits = &ata_bmdma_port_ops, .dev_config = sil_dev_config, .set_mode = sil_set_mode, + .bmdma_setup = sil_bmdma_setup, + .bmdma_start = sil_bmdma_start, + .bmdma_stop = sil_bmdma_stop, + .qc_prep = sil_qc_prep, .freeze = sil_freeze, .thaw = sil_thaw, .scr_read = sil_scr_read, @@ -249,6 +264,83 @@ module_param(slow_down, int, 0444); MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)"); +static void sil_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; + void __iomem *bmdma2 = mmio_base + sil_port[ap->port_no].bmdma2; + + /* clear start/stop bit - can safely always write 0 */ + iowrite8(0, bmdma2); + + /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ + ata_sff_dma_pause(ap); +} + +static void sil_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *bmdma = ap->ioaddr.bmdma_addr; + + /* load PRD table addr. */ + iowrite32(ap->prd_dma, bmdma + ATA_DMA_TABLE_OFS); + + /* issue r/w command */ + ap->ops->sff_exec_command(ap, &qc->tf); +} + +static void sil_bmdma_start(struct ata_queued_cmd *qc) +{ + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + struct ata_port *ap = qc->ap; + void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; + void __iomem *bmdma2 = mmio_base + sil_port[ap->port_no].bmdma2; + u8 dmactl = ATA_DMA_START; + + /* set transfer direction, start host DMA transaction + Note: For Large Block Transfer to work, the DMA must be started + using the bmdma2 register. */ + if (!rw) + dmactl |= ATA_DMA_WR; + iowrite8(dmactl, bmdma2); +} + +/* The way God intended PCI IDE scatter/gather lists to look and behave... */ +static void sil_fill_sg(struct ata_queued_cmd *qc) +{ + struct scatterlist *sg; + struct ata_port *ap = qc->ap; + struct ata_prd *prd, *last_prd = NULL; + unsigned int si; + + prd = &ap->prd[0]; + for_each_sg(qc->sg, sg, qc->n_elem, si) { + /* Note h/w doesn't support 64-bit, so we unconditionally + * truncate dma_addr_t to u32. + */ + u32 addr = (u32) sg_dma_address(sg); + u32 sg_len = sg_dma_len(sg); + + prd->addr = cpu_to_le32(addr); + prd->flags_len = cpu_to_le32(sg_len); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, sg_len); + + last_prd = prd; + prd++; + } + + if (likely(last_prd)) + last_prd->flags_len |= cpu_to_le32(ATA_PRD_EOT); +} + +static void sil_qc_prep(struct ata_queued_cmd *qc) +{ + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + + sil_fill_sg(qc); +} + static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) { u8 cache_line = 0; -- cgit v1.2.3 From f4f4e47e4af6b02dd1c425b931c65d0165356e33 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Thu, 4 Dec 2008 14:24:39 +0900 Subject: [SCSI] add residual argument to scsi_execute and scsi_execute_req scsi_execute() and scsi_execute_req() discard the residual length information. Some callers need it. This adds residual argument (optional) to scsi_execute and scsi_execute_req. Signed-off-by: FUJITA Tomonori Signed-off-by: James Bottomley --- drivers/ata/libata-scsi.c | 4 ++-- drivers/scsi/ch.c | 2 +- drivers/scsi/scsi_ioctl.c | 2 +- drivers/scsi/scsi_lib.c | 17 +++++++++++------ drivers/scsi/scsi_scan.c | 7 ++++--- drivers/scsi/scsi_transport_spi.c | 3 ++- drivers/scsi/sd.c | 11 ++++++----- drivers/scsi/ses.c | 9 +++++---- drivers/scsi/sr.c | 4 ++-- drivers/scsi/sr_ioctl.c | 2 +- include/scsi/scsi_device.h | 5 +++-- 11 files changed, 38 insertions(+), 28 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 47c7afcb36f2..b88e443027c4 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -517,7 +517,7 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) /* Good values for timeout and retries? Values below from scsi_ioctl_send_command() for default case... */ cmd_result = scsi_execute(scsidev, scsi_cmd, data_dir, argbuf, argsize, - sensebuf, (10*HZ), 5, 0); + sensebuf, (10*HZ), 5, 0, NULL); if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */ u8 *desc = sensebuf + 8; @@ -603,7 +603,7 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) /* Good values for timeout and retries? Values below from scsi_ioctl_send_command() for default case... */ cmd_result = scsi_execute(scsidev, scsi_cmd, DMA_NONE, NULL, 0, - sensebuf, (10*HZ), 5, 0); + sensebuf, (10*HZ), 5, 0, NULL); if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */ u8 *desc = sensebuf + 8; diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c index 88ecf94ad979..af9725409f43 100644 --- a/drivers/scsi/ch.c +++ b/drivers/scsi/ch.c @@ -190,7 +190,7 @@ ch_do_scsi(scsi_changer *ch, unsigned char *cmd, result = scsi_execute_req(ch->device, cmd, direction, buffer, buflength, &sshdr, timeout * HZ, - MAX_RETRIES); + MAX_RETRIES, NULL); dprintk("result: 0x%x\n",result); if (driver_byte(result) & DRIVER_SENSE) { diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c index 2ee49f82ca01..2ae4f8fc5831 100644 --- a/drivers/scsi/scsi_ioctl.c +++ b/drivers/scsi/scsi_ioctl.c @@ -94,7 +94,7 @@ static int ioctl_internal_command(struct scsi_device *sdev, char *cmd, SCSI_LOG_IOCTL(1, printk("Trying ioctl with scsi command %d\n", *cmd)); result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, - &sshdr, timeout, retries); + &sshdr, timeout, retries, NULL); SCSI_LOG_IOCTL(2, printk("Ioctl returned 0x%x\n", result)); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index ecfbbd30dce5..f2f51e0333eb 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -183,13 +183,15 @@ int scsi_queue_insert(struct scsi_cmnd *cmd, int reason) * @timeout: request timeout in seconds * @retries: number of times to retry request * @flags: or into request flags; + * @resid: optional residual length * * returns the req->errors value which is the scsi_cmnd result * field. */ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, int data_direction, void *buffer, unsigned bufflen, - unsigned char *sense, int timeout, int retries, int flags) + unsigned char *sense, int timeout, int retries, int flags, + int *resid) { struct request *req; int write = (data_direction == DMA_TO_DEVICE); @@ -224,6 +226,8 @@ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, if (unlikely(req->data_len > 0 && req->data_len <= bufflen)) memset(buffer + (bufflen - req->data_len), 0, req->data_len); + if (resid) + *resid = req->data_len; ret = req->errors; out: blk_put_request(req); @@ -235,7 +239,8 @@ EXPORT_SYMBOL(scsi_execute); int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd, int data_direction, void *buffer, unsigned bufflen, - struct scsi_sense_hdr *sshdr, int timeout, int retries) + struct scsi_sense_hdr *sshdr, int timeout, int retries, + int *resid) { char *sense = NULL; int result; @@ -246,7 +251,7 @@ int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd, return DRIVER_ERROR << 24; } result = scsi_execute(sdev, cmd, data_direction, buffer, bufflen, - sense, timeout, retries, 0); + sense, timeout, retries, 0, resid); if (sshdr) scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, sshdr); @@ -2016,7 +2021,7 @@ scsi_mode_select(struct scsi_device *sdev, int pf, int sp, int modepage, } ret = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, real_buffer, len, - sshdr, timeout, retries); + sshdr, timeout, retries, NULL); kfree(real_buffer); return ret; } @@ -2081,7 +2086,7 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage, memset(buffer, 0, len); result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len, - sshdr, timeout, retries); + sshdr, timeout, retries, NULL); /* This code looks awful: what it's doing is making sure an * ILLEGAL REQUEST sense return identifies the actual command @@ -2163,7 +2168,7 @@ scsi_test_unit_ready(struct scsi_device *sdev, int timeout, int retries, /* try to eat the UNIT_ATTENTION if there are enough retries */ do { result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, sshdr, - timeout, retries); + timeout, retries, NULL); if (sdev->removable && scsi_sense_valid(sshdr) && sshdr->sense_key == UNIT_ATTENTION) sdev->changed = 1; diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index b14dc02c3ded..6963d529e0f0 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -216,7 +216,7 @@ static void scsi_unlock_floptical(struct scsi_device *sdev, scsi_cmd[4] = 0x2a; /* size */ scsi_cmd[5] = 0; scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE, result, 0x2a, NULL, - SCSI_TIMEOUT, 3); + SCSI_TIMEOUT, 3, NULL); } /** @@ -581,7 +581,8 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result, result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE, inq_result, try_inquiry_len, &sshdr, - HZ / 2 + HZ * scsi_inq_timeout, 3); + HZ / 2 + HZ * scsi_inq_timeout, 3, + NULL); SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: INQUIRY %s " "with code 0x%x\n", @@ -1390,7 +1391,7 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags, result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE, lun_data, length, &sshdr, - SCSI_TIMEOUT + 4 * HZ, 3); + SCSI_TIMEOUT + 4 * HZ, 3, NULL); SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: REPORT LUNS" " %s (try %d) result 0x%x\n", result diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index 7c2d28924d2a..96361aa70906 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -111,7 +111,8 @@ static int spi_execute(struct scsi_device *sdev, const void *cmd, sense, DV_TIMEOUT, /* retries */ 1, REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | - REQ_FAILFAST_DRIVER); + REQ_FAILFAST_DRIVER, + NULL); if (result & DRIVER_SENSE) { struct scsi_sense_hdr sshdr_tmp; if (!sshdr) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 5081b3981d3c..62b28d58e65e 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -884,7 +884,7 @@ static int sd_sync_cache(struct scsi_disk *sdkp) * flush everything. */ res = scsi_execute_req(sdp, cmd, DMA_NONE, NULL, 0, &sshdr, - SD_TIMEOUT, SD_MAX_RETRIES); + SD_TIMEOUT, SD_MAX_RETRIES, NULL); if (res == 0) break; } @@ -1134,7 +1134,7 @@ sd_spinup_disk(struct scsi_disk *sdkp) the_result = scsi_execute_req(sdkp->device, cmd, DMA_NONE, NULL, 0, &sshdr, SD_TIMEOUT, - SD_MAX_RETRIES); + SD_MAX_RETRIES, NULL); /* * If the drive has indicated to us that it @@ -1192,7 +1192,8 @@ sd_spinup_disk(struct scsi_disk *sdkp) cmd[4] |= 1 << 4; scsi_execute_req(sdkp->device, cmd, DMA_NONE, NULL, 0, &sshdr, - SD_TIMEOUT, SD_MAX_RETRIES); + SD_TIMEOUT, SD_MAX_RETRIES, + NULL); spintime_expire = jiffies + 100 * HZ; spintime = 1; } @@ -1306,7 +1307,7 @@ repeat: the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE, buffer, longrc ? 13 : 8, &sshdr, - SD_TIMEOUT, SD_MAX_RETRIES); + SD_TIMEOUT, SD_MAX_RETRIES, NULL); if (media_not_present(sdkp, &sshdr)) return; @@ -1986,7 +1987,7 @@ static int sd_start_stop_device(struct scsi_disk *sdkp, int start) return -ENODEV; res = scsi_execute_req(sdp, cmd, DMA_NONE, NULL, 0, &sshdr, - SD_TIMEOUT, SD_MAX_RETRIES); + SD_TIMEOUT, SD_MAX_RETRIES, NULL); if (res) { sd_printk(KERN_WARNING, sdkp, "START_STOP FAILED\n"); sd_print_result(sdkp, res); diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index 1bcf3c33d7ff..7f0df29f3a64 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -77,7 +77,7 @@ static int ses_recv_diag(struct scsi_device *sdev, int page_code, }; return scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen, - NULL, SES_TIMEOUT, SES_RETRIES); + NULL, SES_TIMEOUT, SES_RETRIES, NULL); } static int ses_send_diag(struct scsi_device *sdev, int page_code, @@ -95,7 +95,7 @@ static int ses_send_diag(struct scsi_device *sdev, int page_code, }; result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen, - NULL, SES_TIMEOUT, SES_RETRIES); + NULL, SES_TIMEOUT, SES_RETRIES, NULL); if (result) sdev_printk(KERN_ERR, sdev, "SEND DIAGNOSTIC result: %8x\n", result); @@ -369,7 +369,8 @@ static void ses_match_to_enclosure(struct enclosure_device *edev, return; if (scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, - VPD_INQUIRY_SIZE, NULL, SES_TIMEOUT, SES_RETRIES)) + VPD_INQUIRY_SIZE, NULL, SES_TIMEOUT, SES_RETRIES, + NULL)) goto free; vpd_len = (buf[2] << 8) + buf[3]; @@ -380,7 +381,7 @@ static void ses_match_to_enclosure(struct enclosure_device *edev, cmd[3] = vpd_len >> 8; cmd[4] = vpd_len & 0xff; if (scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, - vpd_len, NULL, SES_TIMEOUT, SES_RETRIES)) + vpd_len, NULL, SES_TIMEOUT, SES_RETRIES, NULL)) goto free; desc = buf + 4; diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 45b66b98a516..e7fa3caead79 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -177,7 +177,7 @@ int sr_test_unit_ready(struct scsi_device *sdev, struct scsi_sense_hdr *sshdr) do { the_result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, sshdr, SR_TIMEOUT, - retries--); + retries--, NULL); if (scsi_sense_valid(sshdr) && sshdr->sense_key == UNIT_ATTENTION) sdev->changed = 1; @@ -681,7 +681,7 @@ static void get_sectorsize(struct scsi_cd *cd) /* Do the command and wait.. */ the_result = scsi_execute_req(cd->device, cmd, DMA_FROM_DEVICE, buffer, sizeof(buffer), NULL, - SR_TIMEOUT, MAX_RETRIES); + SR_TIMEOUT, MAX_RETRIES, NULL); retries--; diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c index ae87d08df588..d92ff512d213 100644 --- a/drivers/scsi/sr_ioctl.c +++ b/drivers/scsi/sr_ioctl.c @@ -207,7 +207,7 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc) memset(sense, 0, sizeof(*sense)); result = scsi_execute(SDev, cgc->cmd, cgc->data_direction, cgc->buffer, cgc->buflen, (char *)sense, - cgc->timeout, IOCTL_RETRIES, 0); + cgc->timeout, IOCTL_RETRIES, 0, NULL); scsi_normalize_sense((char *)sense, sizeof(*sense), &sshdr); diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 2a1c1419994d..01a4c58f8bad 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -365,10 +365,11 @@ extern int scsi_is_target_device(const struct device *); extern int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, int data_direction, void *buffer, unsigned bufflen, unsigned char *sense, int timeout, int retries, - int flag); + int flag, int *resid); extern int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd, int data_direction, void *buffer, unsigned bufflen, - struct scsi_sense_hdr *, int timeout, int retries); + struct scsi_sense_hdr *, int timeout, int retries, + int *resid); extern int scsi_execute_async(struct scsi_device *sdev, const unsigned char *cmd, int cmd_len, int data_direction, void *buffer, unsigned bufflen, int use_sg, -- cgit v1.2.3