From 0ebcddd8e06e94e476f4718af238e9ae67531b04 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Tue, 26 Feb 2019 11:46:47 -0800 Subject: Bluetooth: hci_qca: Add delay after power-off pulse During initialization the power-on pulse is currently sent inmediately after the prior power-off pulse. With this initialization often fails at boot time: [ 15.205224] Bluetooth: hci0: setting up wcn3990 [ 17.341062] Bluetooth: hci0: command 0xfc00 tx timeout [ 22.101453] ERROR: Bluetooth initialization failed [ 25.337740] Bluetooth: hci0: Reading QCA version information failed (-110) After a power-off pulse wait 10ms to give the controller time to power off. Remove the previous short settling delay, it isn't needed anymore. Signed-off-by: Matthias Kaehlcke Reviewed-by: Balakrishna Godavarthi Signed-off-by: Marcel Holtmann --- drivers/bluetooth/hci_qca.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/bluetooth') diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c index bcc70352eb95..f56d2459ea19 100644 --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -1031,13 +1031,13 @@ static int qca_send_power_pulse(struct hci_uart *hu, bool on) } serdev_device_wait_until_sent(hu->serdev, timeout); - - /* Wait for 100 uS for SoC to settle down */ - usleep_range(100, 200); hci_uart_set_flow_control(hu, false); + /* Give to controller time to boot/shutdown */ if (on) msleep(100); + else + msleep(10); return 0; } -- cgit v1.2.3