From 0779bf2d2ecc4d9b1e9437ae659f50e6776a7666 Mon Sep 17 00:00:00 2001 From: Matt LaPlante Date: Thu, 30 Nov 2006 05:24:39 +0100 Subject: Fix misc .c/.h comment typos Fix various .c/.h typos in comments (no code changes). Signed-off-by: Matt LaPlante Signed-off-by: Adrian Bunk --- drivers/char/rio/rioparam.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/char/rio/rioparam.c') diff --git a/drivers/char/rio/rioparam.c b/drivers/char/rio/rioparam.c index 1066d9760704..bb498d24adcc 100644 --- a/drivers/char/rio/rioparam.c +++ b/drivers/char/rio/rioparam.c @@ -87,8 +87,8 @@ static char *_rioparam_c_sccs_ = "@(#)rioparam.c 1.3"; ** command bit set onto the port. The command bit is in the len field, ** and gets ORed in with the actual byte count. ** -** When you send a packet with the command bit set, then the first -** data byte ( data[0] ) is interpretted as the command to execute. +** When you send a packet with the command bit set the first +** data byte (data[0]) is interpreted as the command to execute. ** It also governs what data structure overlay should accompany the packet. ** Commands are defined in cirrus/cirrus.h ** @@ -103,7 +103,7 @@ static char *_rioparam_c_sccs_ = "@(#)rioparam.c 1.3"; ** ** Most commands do not use the remaining bytes in the data array. The ** exceptions are OPEN MOPEN and CONFIG. (NB. As with the SI CONFIG and -** OPEN are currently analagous). With these three commands the following +** OPEN are currently analogous). With these three commands the following ** 11 data bytes are all used to pass config information such as baud rate etc. ** The fields are also defined in cirrus.h. Some contain straightforward ** information such as the transmit XON character. Two contain the transmit and -- cgit v1.2.3