From f13abeff2cdee2256e5f1c5a63fcc57ca8357010 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 17 Oct 2016 22:29:12 -0200 Subject: clk: imx6: Mask mmdc_ch1 handshake for periph2_sel and mmdc_ch1_axi_podf MMDC CH1 is not used on i.MX6Q, so the handshake needed to change the parent of periph2_sel or the divider of mmdc_ch1_axi_podf will never succeed. Disable the handshake mechanism to allow changing the frequency of mmdc_ch1_axi, allowing to use it as a possible source for the LDB DI clock. Signed-off-by: Philipp Zabel Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- drivers/clk/imx/clk-imx6q.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers/clk/imx') diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c index ce8ea10407e4..66825a8238b6 100644 --- a/drivers/clk/imx/clk-imx6q.c +++ b/drivers/clk/imx/clk-imx6q.c @@ -156,6 +156,19 @@ static struct clk ** const uart_clks[] __initconst = { NULL }; +#define CCM_CCDR 0x04 + +#define CCDR_MMDC_CH1_MASK BIT(16) + +static void __init imx6q_mmdc_ch1_mask_handshake(void __iomem *ccm_base) +{ + unsigned int reg; + + reg = readl_relaxed(ccm_base + CCM_CCDR); + reg |= CCDR_MMDC_CH1_MASK; + writel_relaxed(reg, ccm_base + CCM_CCDR); +} + static void __init imx6q_clocks_init(struct device_node *ccm_node) { struct device_node *np; @@ -297,6 +310,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) base = of_iomap(np, 0); WARN_ON(!base); + imx6q_mmdc_ch1_mask_handshake(base); + /* name reg shift width parent_names num_parents */ clk[IMX6QDL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); clk[IMX6QDL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); -- cgit v1.2.3 From 03d576f202e8cd40d500aa4f7594ad702d861096 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 17 Oct 2016 22:29:13 -0200 Subject: clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only Due to incorrect placement of the clock gate cell in the ldb_di[x]_clk tree, the glitchy parent mux of ldb_di[x]_clk can cause a glitch to enter the ldb_di_ipu_div divider. If the divider gets locked up, no ldb_di[x]_clk is generated, and the LVDS display will hang when the ipu_di_clk is sourced from ldb_di_clk. To fix the problem, both the new and current parent of the ldb_di_clk should be disabled before the switch. As this can not be guaranteed by the clock framework during runtime, make the ldb_di[x]_sel muxes read-only. A workaround to set the muxes once during boot could be added to the kernel or bootloader. Signed-off-by: Philipp Zabel Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- drivers/clk/imx/clk-imx6q.c | 10 ++-------- drivers/clk/imx/clk.h | 8 ++++++++ 2 files changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers/clk/imx') diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c index 66825a8238b6..a4f4de5c9cb2 100644 --- a/drivers/clk/imx/clk-imx6q.c +++ b/drivers/clk/imx/clk-imx6q.c @@ -345,8 +345,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels)); clk[IMX6QDL_CLK_IPU1_SEL] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); clk[IMX6QDL_CLK_IPU2_SEL] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); - clk[IMX6QDL_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT); - clk[IMX6QDL_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT); + clk[IMX6QDL_CLK_LDB_DI0_SEL] = imx_clk_mux_ldb("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels)); + clk[IMX6QDL_CLK_LDB_DI1_SEL] = imx_clk_mux_ldb("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels)); clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); clk[IMX6QDL_CLK_IPU1_DI1_PRE_SEL] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); clk[IMX6QDL_CLK_IPU2_DI0_PRE_SEL] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); @@ -597,12 +597,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk_register_clkdev(clk[IMX6QDL_CLK_ENET_REF], "enet_ref", NULL); - if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) || - clk_on_imx6dl()) { - clk_set_parent(clk[IMX6QDL_CLK_LDB_DI0_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]); - clk_set_parent(clk[IMX6QDL_CLK_LDB_DI1_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]); - } - clk_set_rate(clk[IMX6QDL_CLK_PLL3_PFD1_540M], 540000000); if (clk_on_imx6dl()) clk_set_parent(clk[IMX6QDL_CLK_IPU1_SEL], clk[IMX6QDL_CLK_PLL3_PFD1_540M]); diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h index 3799ff82a9b4..4afad3b96a61 100644 --- a/drivers/clk/imx/clk.h +++ b/drivers/clk/imx/clk.h @@ -75,6 +75,14 @@ static inline struct clk *imx_clk_fixed(const char *name, int rate) return clk_register_fixed_rate(NULL, name, NULL, 0, rate); } +static inline struct clk *imx_clk_mux_ldb(const char *name, void __iomem *reg, + u8 shift, u8 width, const char **parents, int num_parents) +{ + return clk_register_mux(NULL, name, parents, num_parents, + CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT, reg, + shift, width, CLK_MUX_READ_ONLY, &imx_ccm_lock); +} + static inline struct clk *imx_clk_fixed_factor(const char *name, const char *parent, unsigned int mult, unsigned int div) { -- cgit v1.2.3 From 5d283b083800867dc329e6433576664bf0fc18d5 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 17 Oct 2016 22:29:14 -0200 Subject: clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK Due to incorrect placement of the clock gate cell in the ldb_di[x]_clk tree, the glitchy parent mux of ldb_di[x]_clk can cause a glitch to enter the ldb_di_ipu_div divider. If the divider gets locked up, no ldb_di[x]_clk is generated, and the LVDS display will hang when the ipu_di_clk is sourced from ldb_di_clk. To fix the problem, both the new and current parent of the ldb_di_clk should be disabled before the switch. This patch ensures that correct steps are followed when ldb_di_clk parent is switched in the beginning of boot. The glitchy muxes are then registered as read-only. The clock parent can be selected using the assigned-clocks and assigned-clock-parents properties of the ccm device tree node: &clks { assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>; assigned-clock-parents = <&clks IMX6QDL_CLK_MMDC_CH1_AXI>, <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; }; The issue is explained in detail in EB821 ("LDB Clock Switch Procedure & i.MX6 Asynchronous Clock Switching Guidelines") [1]. [1] http://www.nxp.com/files/32bit/doc/eng_bulletin/EB821.pdf Signed-off-by: Ranjani Vaidyanathan Signed-off-by: Fabio Estevam Signed-off-by: Philipp Zabel Reviewed-by: Akshay Bhat Tested-by Joshua Clayton Tested-by: Charles Kang Signed-off-by: Shawn Guo --- drivers/clk/imx/clk-imx6q.c | 264 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 259 insertions(+), 5 deletions(-) (limited to 'drivers/clk/imx') diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c index a4f4de5c9cb2..42ffc1c92bab 100644 --- a/drivers/clk/imx/clk-imx6q.c +++ b/drivers/clk/imx/clk-imx6q.c @@ -156,9 +156,90 @@ static struct clk ** const uart_clks[] __initconst = { NULL }; +static int ldb_di_sel_by_clock_id(int clock_id) +{ + switch (clock_id) { + case IMX6QDL_CLK_PLL5_VIDEO_DIV: + if (clk_on_imx6q() && + imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) + return -ENOENT; + return 0; + case IMX6QDL_CLK_PLL2_PFD0_352M: + return 1; + case IMX6QDL_CLK_PLL2_PFD2_396M: + return 2; + case IMX6QDL_CLK_MMDC_CH1_AXI: + return 3; + case IMX6QDL_CLK_PLL3_USB_OTG: + return 4; + default: + return -ENOENT; + } +} + +static void of_assigned_ldb_sels(struct device_node *node, + unsigned int *ldb_di0_sel, + unsigned int *ldb_di1_sel) +{ + struct of_phandle_args clkspec; + int index, rc, num_parents; + int parent, child, sel; + + num_parents = of_count_phandle_with_args(node, "assigned-clock-parents", + "#clock-cells"); + for (index = 0; index < num_parents; index++) { + rc = of_parse_phandle_with_args(node, "assigned-clock-parents", + "#clock-cells", index, &clkspec); + if (rc < 0) { + /* skip empty (null) phandles */ + if (rc == -ENOENT) + continue; + else + return; + } + if (clkspec.np != node || clkspec.args[0] >= IMX6QDL_CLK_END) { + pr_err("ccm: parent clock %d not in ccm\n", index); + return; + } + parent = clkspec.args[0]; + + rc = of_parse_phandle_with_args(node, "assigned-clocks", + "#clock-cells", index, &clkspec); + if (rc < 0) + return; + if (clkspec.np != node || clkspec.args[0] >= IMX6QDL_CLK_END) { + pr_err("ccm: child clock %d not in ccm\n", index); + return; + } + child = clkspec.args[0]; + + if (child != IMX6QDL_CLK_LDB_DI0_SEL && + child != IMX6QDL_CLK_LDB_DI1_SEL) + continue; + + sel = ldb_di_sel_by_clock_id(parent); + if (sel < 0) { + pr_err("ccm: invalid ldb_di%d parent clock: %d\n", + child == IMX6QDL_CLK_LDB_DI1_SEL, parent); + continue; + } + + if (child == IMX6QDL_CLK_LDB_DI0_SEL) + *ldb_di0_sel = sel; + if (child == IMX6QDL_CLK_LDB_DI1_SEL) + *ldb_di1_sel = sel; + } +} + #define CCM_CCDR 0x04 +#define CCM_CCSR 0x0c +#define CCM_CS2CDR 0x2c + +#define CCDR_MMDC_CH1_MASK BIT(16) +#define CCSR_PLL3_SW_CLK_SEL BIT(0) -#define CCDR_MMDC_CH1_MASK BIT(16) +#define CS2CDR_LDB_DI0_CLK_SEL_SHIFT 9 +#define CS2CDR_LDB_DI1_CLK_SEL_SHIFT 12 static void __init imx6q_mmdc_ch1_mask_handshake(void __iomem *ccm_base) { @@ -169,10 +250,173 @@ static void __init imx6q_mmdc_ch1_mask_handshake(void __iomem *ccm_base) writel_relaxed(reg, ccm_base + CCM_CCDR); } +/* + * The only way to disable the MMDC_CH1 clock is to move it to pll3_sw_clk + * via periph2_clk2_sel and then to disable pll3_sw_clk by selecting the + * bypass clock source, since there is no CG bit for mmdc_ch1. + */ +static void mmdc_ch1_disable(void __iomem *ccm_base) +{ + unsigned int reg; + + clk_set_parent(clk[IMX6QDL_CLK_PERIPH2_CLK2_SEL], + clk[IMX6QDL_CLK_PLL3_USB_OTG]); + + /* + * Handshake with mmdc_ch1 module must be masked when changing + * periph2_clk_sel. + */ + clk_set_parent(clk[IMX6QDL_CLK_PERIPH2], clk[IMX6QDL_CLK_PERIPH2_CLK2]); + + /* Disable pll3_sw_clk by selecting the bypass clock source */ + reg = readl_relaxed(ccm_base + CCM_CCSR); + reg |= CCSR_PLL3_SW_CLK_SEL; + writel_relaxed(reg, ccm_base + CCM_CCSR); +} + +static void mmdc_ch1_reenable(void __iomem *ccm_base) +{ + unsigned int reg; + + /* Enable pll3_sw_clk by disabling the bypass */ + reg = readl_relaxed(ccm_base + CCM_CCSR); + reg &= ~CCSR_PLL3_SW_CLK_SEL; + writel_relaxed(reg, ccm_base + CCM_CCSR); + + clk_set_parent(clk[IMX6QDL_CLK_PERIPH2], clk[IMX6QDL_CLK_PERIPH2_PRE]); +} + +/* + * We have to follow a strict procedure when changing the LDB clock source, + * otherwise we risk introducing a glitch that can lock up the LDB divider. + * Things to keep in mind: + * + * 1. The current and new parent clock inputs to the mux must be disabled. + * 2. The default clock input for ldb_di0/1_clk_sel is mmdc_ch1_axi, which + * has no CG bit. + * 3. pll2_pfd2_396m can not be gated if it is used as memory clock. + * 4. In the RTL implementation of the LDB_DI_CLK_SEL muxes the top four + * options are in one mux and the PLL3 option along with three unused + * inputs is in a second mux. There is a third mux with two inputs used + * to decide between the first and second 4-port mux: + * + * pll5_video_div 0 --|\ + * pll2_pfd0_352m 1 --| |_ + * pll2_pfd2_396m 2 --| | `-|\ + * mmdc_ch1_axi 3 --|/ | | + * | |-- + * pll3_usb_otg 4 --|\ | | + * 5 --| |_,-|/ + * 6 --| | + * 7 --|/ + * + * The ldb_di0/1_clk_sel[1:0] bits control both 4-port muxes at the same time. + * The ldb_di0/1_clk_sel[2] bit controls the 2-port mux. The code below + * switches the parent to the bottom mux first and then manipulates the top + * mux to ensure that no glitch will enter the divider. + */ +static void init_ldb_clks(struct device_node *np, void __iomem *ccm_base) +{ + unsigned int reg; + unsigned int sel[2][4]; + int i; + + reg = readl_relaxed(ccm_base + CCM_CS2CDR); + sel[0][0] = (reg >> CS2CDR_LDB_DI0_CLK_SEL_SHIFT) & 7; + sel[1][0] = (reg >> CS2CDR_LDB_DI1_CLK_SEL_SHIFT) & 7; + + sel[0][3] = sel[0][2] = sel[0][1] = sel[0][0]; + sel[1][3] = sel[1][2] = sel[1][1] = sel[1][0]; + + of_assigned_ldb_sels(np, &sel[0][3], &sel[1][3]); + + for (i = 0; i < 2; i++) { + /* Warn if a glitch might have been introduced already */ + if (sel[i][0] != 3) { + pr_warn("ccm: ldb_di%d_sel already changed from reset value: %d\n", + i, sel[i][0]); + } + + if (sel[i][0] == sel[i][3]) + continue; + + /* Only switch to or from pll2_pfd2_396m if it is disabled */ + if ((sel[i][0] == 2 || sel[i][3] == 2) && + (clk_get_parent(clk[IMX6QDL_CLK_PERIPH_PRE]) == + clk[IMX6QDL_CLK_PLL2_PFD2_396M])) { + pr_err("ccm: ldb_di%d_sel: couldn't disable pll2_pfd2_396m\n", + i); + sel[i][3] = sel[i][2] = sel[i][1] = sel[i][0]; + continue; + } + + /* First switch to the bottom mux */ + sel[i][1] = sel[i][0] | 4; + + /* Then configure the top mux before switching back to it */ + sel[i][2] = sel[i][3] | 4; + + pr_debug("ccm: switching ldb_di%d_sel: %d->%d->%d->%d\n", i, + sel[i][0], sel[i][1], sel[i][2], sel[i][3]); + } + + if (sel[0][0] == sel[0][3] && sel[1][0] == sel[1][3]) + return; + + mmdc_ch1_disable(ccm_base); + + for (i = 1; i < 4; i++) { + reg = readl_relaxed(ccm_base + CCM_CS2CDR); + reg &= ~((7 << CS2CDR_LDB_DI0_CLK_SEL_SHIFT) | + (7 << CS2CDR_LDB_DI1_CLK_SEL_SHIFT)); + reg |= ((sel[0][i] << CS2CDR_LDB_DI0_CLK_SEL_SHIFT) | + (sel[1][i] << CS2CDR_LDB_DI1_CLK_SEL_SHIFT)); + writel_relaxed(reg, ccm_base + CCM_CS2CDR); + } + + mmdc_ch1_reenable(ccm_base); +} + +#define CCM_ANALOG_PLL_VIDEO 0xa0 +#define CCM_ANALOG_PFD_480 0xf0 +#define CCM_ANALOG_PFD_528 0x100 + +#define PLL_ENABLE BIT(13) + +#define PFD0_CLKGATE BIT(7) +#define PFD1_CLKGATE BIT(15) +#define PFD2_CLKGATE BIT(23) +#define PFD3_CLKGATE BIT(31) + +static void disable_anatop_clocks(void __iomem *anatop_base) +{ + unsigned int reg; + + /* Make sure PLL2 PFDs 0-2 are gated */ + reg = readl_relaxed(anatop_base + CCM_ANALOG_PFD_528); + /* Cannot gate PFD2 if pll2_pfd2_396m is the parent of MMDC clock */ + if (clk_get_parent(clk[IMX6QDL_CLK_PERIPH_PRE]) == + clk[IMX6QDL_CLK_PLL2_PFD2_396M]) + reg |= PFD0_CLKGATE | PFD1_CLKGATE; + else + reg |= PFD0_CLKGATE | PFD1_CLKGATE | PFD2_CLKGATE; + writel_relaxed(reg, anatop_base + CCM_ANALOG_PFD_528); + + /* Make sure PLL3 PFDs 0-3 are gated */ + reg = readl_relaxed(anatop_base + CCM_ANALOG_PFD_480); + reg |= PFD0_CLKGATE | PFD1_CLKGATE | PFD2_CLKGATE | PFD3_CLKGATE; + writel_relaxed(reg, anatop_base + CCM_ANALOG_PFD_480); + + /* Make sure PLL5 is disabled */ + reg = readl_relaxed(anatop_base + CCM_ANALOG_PLL_VIDEO); + reg &= ~PLL_ENABLE; + writel_relaxed(reg, anatop_base + CCM_ANALOG_PLL_VIDEO); +} + static void __init imx6q_clocks_init(struct device_node *ccm_node) { struct device_node *np; - void __iomem *base; + void __iomem *anatop_base, *base; int i; int ret; @@ -185,7 +429,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_ANACLK2] = imx_obtain_fixed_clock("anaclk2", 0); np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); - base = of_iomap(np, 0); + anatop_base = base = of_iomap(np, 0); WARN_ON(!base); /* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */ @@ -310,8 +554,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) base = of_iomap(np, 0); WARN_ON(!base); - imx6q_mmdc_ch1_mask_handshake(base); - /* name reg shift width parent_names num_parents */ clk[IMX6QDL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); clk[IMX6QDL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); @@ -345,6 +587,18 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels)); clk[IMX6QDL_CLK_IPU1_SEL] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); clk[IMX6QDL_CLK_IPU2_SEL] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); + + disable_anatop_clocks(anatop_base); + + imx6q_mmdc_ch1_mask_handshake(base); + + /* + * The LDB_DI0/1_SEL muxes are registered read-only due to a hardware + * bug. Set the muxes to the requested values before registering the + * ldb_di_sel clocks. + */ + init_ldb_clks(np, base); + clk[IMX6QDL_CLK_LDB_DI0_SEL] = imx_clk_mux_ldb("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels)); clk[IMX6QDL_CLK_LDB_DI1_SEL] = imx_clk_mux_ldb("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels)); clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); -- cgit v1.2.3 From 73cd5e53caba2425f5b73ad0950544d1168ad27b Mon Sep 17 00:00:00 2001 From: Bai Ping Date: Mon, 14 Nov 2016 15:04:22 +0800 Subject: clk: imx: clk-imx6ul: add clk support for imx6ull imx6ull is the derived SoC from imx6ul Signed-off-by: Peng Fan Signed-off-by: Bai Ping Signed-off-by: Peter Chen Signed-off-by: Shawn Guo --- drivers/clk/imx/clk-imx6ul.c | 72 +++++++++++++++++++++++++++----- include/dt-bindings/clock/imx6ul-clock.h | 15 ++++++- 2 files changed, 75 insertions(+), 12 deletions(-) (limited to 'drivers/clk/imx') diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c index d1d7787ce211..75c35fb12b60 100644 --- a/drivers/clk/imx/clk-imx6ul.c +++ b/drivers/clk/imx/clk-imx6ul.c @@ -64,6 +64,10 @@ static const char *perclk_sels[] = { "ipg", "osc", }; static const char *lcdif_sels[] = { "lcdif_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; static const char *csi_sels[] = { "osc", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; static const char *sim_sels[] = { "sim_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; +/* epdc_pre_sels, epdc_sels, esai_sels only exists on i.MX6ULL */ +static const char *epdc_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", }; +static const char *esai_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", }; +static const char *epdc_sels[] = { "epdc_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; static struct clk *clks[IMX6UL_CLK_END]; static struct clk_onecell_data clk_data; @@ -102,6 +106,17 @@ static u32 share_count_audio; static u32 share_count_sai1; static u32 share_count_sai2; static u32 share_count_sai3; +static u32 share_count_esai; + +static inline int clk_on_imx6ul(void) +{ + return of_machine_is_compatible("fsl,imx6ul"); +} + +static inline int clk_on_imx6ull(void) +{ + return of_machine_is_compatible("fsl,imx6ull"); +} static void __init imx6ul_clocks_init(struct device_node *ccm_node) { @@ -238,12 +253,19 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) clks[IMX6UL_CLK_QSPI1_SEL] = imx_clk_mux("qspi1_sel", base + 0x1c, 7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels)); clks[IMX6UL_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels)); clks[IMX6UL_CLK_CAN_SEL] = imx_clk_mux("can_sel", base + 0x20, 8, 2, can_sels, ARRAY_SIZE(can_sels)); + if (clk_on_imx6ull()) + clks[IMX6ULL_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, esai_sels, ARRAY_SIZE(esai_sels)); clks[IMX6UL_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels)); clks[IMX6UL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 15, 3, enfc_sels, ARRAY_SIZE(enfc_sels)); clks[IMX6UL_CLK_LDB_DI0_SEL] = imx_clk_mux("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels)); clks[IMX6UL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, spdif_sels, ARRAY_SIZE(spdif_sels)); - clks[IMX6UL_CLK_SIM_PRE_SEL] = imx_clk_mux("sim_pre_sel", base + 0x34, 15, 3, sim_pre_sels, ARRAY_SIZE(sim_pre_sels)); - clks[IMX6UL_CLK_SIM_SEL] = imx_clk_mux("sim_sel", base + 0x34, 9, 3, sim_sels, ARRAY_SIZE(sim_sels)); + if (clk_on_imx6ul()) { + clks[IMX6UL_CLK_SIM_PRE_SEL] = imx_clk_mux("sim_pre_sel", base + 0x34, 15, 3, sim_pre_sels, ARRAY_SIZE(sim_pre_sels)); + clks[IMX6UL_CLK_SIM_SEL] = imx_clk_mux("sim_sel", base + 0x34, 9, 3, sim_sels, ARRAY_SIZE(sim_sels)); + } else if (clk_on_imx6ull()) { + clks[IMX6ULL_CLK_EPDC_PRE_SEL] = imx_clk_mux("epdc_pre_sel", base + 0x34, 15, 3, epdc_pre_sels, ARRAY_SIZE(epdc_pre_sels)); + clks[IMX6ULL_CLK_EPDC_SEL] = imx_clk_mux("epdc_sel", base + 0x34, 9, 3, epdc_sels, ARRAY_SIZE(epdc_sels)); + } clks[IMX6UL_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels)); clks[IMX6UL_CLK_LCDIF_PRE_SEL] = imx_clk_mux("lcdif_pre_sel", base + 0x38, 15, 3, lcdif_pre_sels, ARRAY_SIZE(lcdif_pre_sels)); clks[IMX6UL_CLK_LCDIF_SEL] = imx_clk_mux("lcdif_sel", base + 0x38, 9, 3, lcdif_sels, ARRAY_SIZE(lcdif_sels)); @@ -276,6 +298,10 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) clks[IMX6UL_CLK_SAI3_PODF] = imx_clk_divider("sai3_podf", "sai3_pred", base + 0x28, 16, 6); clks[IMX6UL_CLK_SAI1_PRED] = imx_clk_divider("sai1_pred", "sai1_sel", base + 0x28, 6, 3); clks[IMX6UL_CLK_SAI1_PODF] = imx_clk_divider("sai1_podf", "sai1_pred", base + 0x28, 0, 6); + if (clk_on_imx6ull()) { + clks[IMX6ULL_CLK_ESAI_PRED] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3); + clks[IMX6ULL_CLK_ESAI_PODF] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3); + } clks[IMX6UL_CLK_ENFC_PRED] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3); clks[IMX6UL_CLK_ENFC_PODF] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6); clks[IMX6UL_CLK_SAI2_PRED] = imx_clk_divider("sai2_pred", "sai2_sel", base + 0x2c, 6, 3); @@ -298,9 +324,15 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) clks[IMX6UL_CLK_APBHDMA] = imx_clk_gate2("apbh_dma", "bch_podf", base + 0x68, 4); clks[IMX6UL_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc); clks[IMX6UL_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc); - clks[IMX6UL_CLK_CAAM_MEM] = imx_clk_gate2("caam_mem", "ahb", base + 0x68, 8); - clks[IMX6UL_CLK_CAAM_ACLK] = imx_clk_gate2("caam_aclk", "ahb", base + 0x68, 10); - clks[IMX6UL_CLK_CAAM_IPG] = imx_clk_gate2("caam_ipg", "ipg", base + 0x68, 12); + if (clk_on_imx6ul()) { + clks[IMX6UL_CLK_CAAM_MEM] = imx_clk_gate2("caam_mem", "ahb", base + 0x68, 8); + clks[IMX6UL_CLK_CAAM_ACLK] = imx_clk_gate2("caam_aclk", "ahb", base + 0x68, 10); + clks[IMX6UL_CLK_CAAM_IPG] = imx_clk_gate2("caam_ipg", "ipg", base + 0x68, 12); + } else if (clk_on_imx6ull()) { + clks[IMX6ULL_CLK_DCP_CLK] = imx_clk_gate2("dcp", "ahb", base + 0x68, 10); + clks[IMX6UL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x68, 12); + clks[IMX6UL_CLK_ENET_AHB] = imx_clk_gate2("enet_ahb", "ahb", base + 0x68, 12); + } clks[IMX6UL_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14); clks[IMX6UL_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_podf", base + 0x68, 16); clks[IMX6UL_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18); @@ -309,7 +341,10 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) clks[IMX6UL_CLK_GPT2_SERIAL] = imx_clk_gate2("gpt2_serial", "perclk", base + 0x68, 26); clks[IMX6UL_CLK_UART2_IPG] = imx_clk_gate2("uart2_ipg", "ipg", base + 0x68, 28); clks[IMX6UL_CLK_UART2_SERIAL] = imx_clk_gate2("uart2_serial", "uart_podf", base + 0x68, 28); - clks[IMX6UL_CLK_AIPSTZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x68, 30); + if (clk_on_imx6ul()) + clks[IMX6UL_CLK_AIPSTZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x68, 30); + else if (clk_on_imx6ull()) + clks[IMX6UL_CLK_AIPSTZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x80, 18); /* CCGR1 */ clks[IMX6UL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0); @@ -328,6 +363,11 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) clks[IMX6UL_CLK_UART4_SERIAL] = imx_clk_gate2("uart4_serail", "uart_podf", base + 0x6c, 24); /* CCGR2 */ + if (clk_on_imx6ull()) { + clks[IMX6ULL_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x70, 0, &share_count_esai); + clks[IMX6ULL_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ahb", base + 0x70, 0, &share_count_esai); + clks[IMX6ULL_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x70, 0, &share_count_esai); + } clks[IMX6UL_CLK_CSI] = imx_clk_gate2("csi", "csi_podf", base + 0x70, 2); clks[IMX6UL_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6); clks[IMX6UL_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8); @@ -340,8 +380,13 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) /* CCGR3 */ clks[IMX6UL_CLK_UART5_IPG] = imx_clk_gate2("uart5_ipg", "ipg", base + 0x74, 2); clks[IMX6UL_CLK_UART5_SERIAL] = imx_clk_gate2("uart5_serial", "uart_podf", base + 0x74, 2); - clks[IMX6UL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x74, 4); - clks[IMX6UL_CLK_ENET_AHB] = imx_clk_gate2("enet_ahb", "ahb", base + 0x74, 4); + if (clk_on_imx6ul()) { + clks[IMX6UL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x74, 4); + clks[IMX6UL_CLK_ENET_AHB] = imx_clk_gate2("enet_ahb", "ahb", base + 0x74, 4); + } else if (clk_on_imx6ull()) { + clks[IMX6ULL_CLK_EPDC_ACLK] = imx_clk_gate2("epdc_aclk", "axi", base + 0x74, 4); + clks[IMX6ULL_CLK_EPDC_PIX] = imx_clk_gate2("epdc_pix", "epdc_podf", base + 0x74, 4); + } clks[IMX6UL_CLK_UART6_IPG] = imx_clk_gate2("uart6_ipg", "ipg", base + 0x74, 6); clks[IMX6UL_CLK_UART6_SERIAL] = imx_clk_gate2("uart6_serial", "uart_podf", base + 0x74, 6); clks[IMX6UL_CLK_LCDIF_PIX] = imx_clk_gate2("lcdif_pix", "lcdif_podf", base + 0x74, 10); @@ -385,8 +430,10 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) clks[IMX6UL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); clks[IMX6UL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2); clks[IMX6UL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); - clks[IMX6UL_CLK_SIM1] = imx_clk_gate2("sim1", "sim_sel", base + 0x80, 6); - clks[IMX6UL_CLK_SIM2] = imx_clk_gate2("sim2", "sim_sel", base + 0x80, 8); + if (clk_on_imx6ul()) { + clks[IMX6UL_CLK_SIM1] = imx_clk_gate2("sim1", "sim_sel", base + 0x80, 6); + clks[IMX6UL_CLK_SIM2] = imx_clk_gate2("sim2", "sim_sel", base + 0x80, 8); + } clks[IMX6UL_CLK_EIM] = imx_clk_gate2("eim", "eim_slow_podf", base + 0x80, 10); clks[IMX6UL_CLK_PWM8] = imx_clk_gate2("pwm8", "perclk", base + 0x80, 16); clks[IMX6UL_CLK_UART8_IPG] = imx_clk_gate2("uart8_ipg", "ipg", base + 0x80, 14); @@ -441,7 +488,10 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) } clk_set_parent(clks[IMX6UL_CLK_CAN_SEL], clks[IMX6UL_CLK_PLL3_60M]); - clk_set_parent(clks[IMX6UL_CLK_SIM_PRE_SEL], clks[IMX6UL_CLK_PLL3_USB_OTG]); + if (clk_on_imx6ul()) + clk_set_parent(clks[IMX6UL_CLK_SIM_PRE_SEL], clks[IMX6UL_CLK_PLL3_USB_OTG]); + else if (clk_on_imx6ull()) + clk_set_parent(clks[IMX6ULL_CLK_EPDC_PRE_SEL], clks[IMX6UL_CLK_PLL3_PFD2]); clk_set_parent(clks[IMX6UL_CLK_ENFC_SEL], clks[IMX6UL_CLK_PLL2_PFD2]); } diff --git a/include/dt-bindings/clock/imx6ul-clock.h b/include/dt-bindings/clock/imx6ul-clock.h index fd8aee8f64ae..ee9f1a508d2f 100644 --- a/include/dt-bindings/clock/imx6ul-clock.h +++ b/include/dt-bindings/clock/imx6ul-clock.h @@ -236,6 +236,19 @@ #define IMX6UL_CLK_PLL3_120M 223 #define IMX6UL_CLK_KPP 224 -#define IMX6UL_CLK_END 225 +/* For i.MX6ULL */ +#define IMX6ULL_CLK_ESAI_PRED 225 +#define IMX6ULL_CLK_ESAI_PODF 226 +#define IMX6ULL_CLK_ESAI_EXTAL 227 +#define IMX6ULL_CLK_ESAI_MEM 228 +#define IMX6ULL_CLK_ESAI_IPG 229 +#define IMX6ULL_CLK_DCP_CLK 230 +#define IMX6ULL_CLK_EPDC_PRE_SEL 231 +#define IMX6ULL_CLK_EPDC_SEL 232 +#define IMX6ULL_CLK_EPDC_PODF 233 +#define IMX6ULL_CLK_EPDC_ACLK 234 +#define IMX6ULL_CLK_EPDC_PIX 235 +#define IMX6ULL_CLK_ESAI_SEL 236 +#define IMX6UL_CLK_END 237 #endif /* __DT_BINDINGS_CLOCK_IMX6UL_H */ -- cgit v1.2.3