From a6fe3771d389cc660933509b7dfb945c596636f5 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 21 Feb 2014 17:22:32 +0200 Subject: CLK: TI: DPLL: simplify autoidle register detection logic AMxxxx dpll_data previously had autoidle_mask set, even if these SoC:s don't have autoidle register. Remove the bit-field value as it is unused, also drop the unnecessary DPLL_HAS_AUTOIDLE flag passing during init, as we can just simply check against the contents of the autoidle_mask. Signed-off-by: Tero Kristo --- drivers/clk/ti/dpll.c | 39 +++++++++++++++------------------------ 1 file changed, 15 insertions(+), 24 deletions(-) (limited to 'drivers/clk/ti') diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index 7e498a44f97d..dda262db42ea 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -25,8 +25,6 @@ #undef pr_fmt #define pr_fmt(fmt) "%s: " fmt, __func__ -#define DPLL_HAS_AUTOIDLE 0x1 - #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ defined(CONFIG_SOC_DRA7XX) static const struct clk_ops dpll_m4xen_ck_ops = { @@ -193,14 +191,12 @@ static void ti_clk_register_dpll_x2(struct device_node *node, * @node: device node containing the DPLL info * @ops: ops for the DPLL * @ddt: DPLL data template to use - * @init_flags: flags for controlling init types * * Initializes a DPLL clock from device tree data. */ static void __init of_ti_dpll_setup(struct device_node *node, const struct clk_ops *ops, - const struct dpll_data *ddt, - u8 init_flags) + const struct dpll_data *ddt) { struct clk_hw_omap *clk_hw = NULL; struct clk_init_data *init = NULL; @@ -247,7 +243,7 @@ static void __init of_ti_dpll_setup(struct device_node *node, if (!dd->control_reg || !dd->idlest_reg || !dd->mult_div1_reg) goto cleanup; - if (init_flags & DPLL_HAS_AUTOIDLE) { + if (dd->autoidle_mask) { dd->autoidle_reg = ti_clk_get_reg_addr(node, 3); if (!dd->autoidle_reg) goto cleanup; @@ -310,7 +306,7 @@ static void __init of_ti_omap3_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap3_dpll_clock, "ti,omap3-dpll-clock", of_ti_omap3_dpll_setup); @@ -329,7 +325,7 @@ static void __init of_ti_omap3_core_dpll_setup(struct device_node *node) .freqsel_mask = 0xf0, }; - of_ti_dpll_setup(node, &omap3_dpll_core_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &omap3_dpll_core_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap3_core_dpll_clock, "ti,omap3-dpll-core-clock", of_ti_omap3_core_dpll_setup); @@ -349,7 +345,7 @@ static void __init of_ti_omap3_per_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap3_per_dpll_clock, "ti,omap3-dpll-per-clock", of_ti_omap3_per_dpll_setup); @@ -371,7 +367,7 @@ static void __init of_ti_omap3_per_jtype_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap3_per_jtype_dpll_clock, "ti,omap3-dpll-per-j-type-clock", of_ti_omap3_per_jtype_dpll_setup); @@ -391,7 +387,7 @@ static void __init of_ti_omap4_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &dpll_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap4_dpll_clock, "ti,omap4-dpll-clock", of_ti_omap4_dpll_setup); @@ -410,7 +406,7 @@ static void __init of_ti_omap4_core_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap4_core_dpll_clock, "ti,omap4-dpll-core-clock", of_ti_omap4_core_dpll_setup); @@ -433,7 +429,7 @@ static void __init of_ti_omap4_m4xen_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap4_m4xen_dpll_clock, "ti,omap4-dpll-m4xen-clock", of_ti_omap4_m4xen_dpll_setup); @@ -454,7 +450,7 @@ static void __init of_ti_omap4_jtype_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap4_jtype_dpll_clock, "ti,omap4-dpll-j-type-clock", of_ti_omap4_jtype_dpll_setup); @@ -465,7 +461,6 @@ static void __init of_ti_am3_no_gate_dpll_setup(struct device_node *node) const struct dpll_data dd = { .idlest_mask = 0x1, .enable_mask = 0x7, - .autoidle_mask = 0x7, .mult_mask = 0x7ff << 8, .div1_mask = 0x7f, .max_multiplier = 2047, @@ -474,7 +469,7 @@ static void __init of_ti_am3_no_gate_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd, 0); + of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd); } CLK_OF_DECLARE(ti_am3_no_gate_dpll_clock, "ti,am3-dpll-no-gate-clock", of_ti_am3_no_gate_dpll_setup); @@ -484,7 +479,6 @@ static void __init of_ti_am3_jtype_dpll_setup(struct device_node *node) const struct dpll_data dd = { .idlest_mask = 0x1, .enable_mask = 0x7, - .autoidle_mask = 0x7, .mult_mask = 0x7ff << 8, .div1_mask = 0x7f, .max_multiplier = 4095, @@ -494,7 +488,7 @@ static void __init of_ti_am3_jtype_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_ck_ops, &dd, 0); + of_ti_dpll_setup(node, &dpll_ck_ops, &dd); } CLK_OF_DECLARE(ti_am3_jtype_dpll_clock, "ti,am3-dpll-j-type-clock", of_ti_am3_jtype_dpll_setup); @@ -504,7 +498,6 @@ static void __init of_ti_am3_no_gate_jtype_dpll_setup(struct device_node *node) const struct dpll_data dd = { .idlest_mask = 0x1, .enable_mask = 0x7, - .autoidle_mask = 0x7, .mult_mask = 0x7ff << 8, .div1_mask = 0x7f, .max_multiplier = 2047, @@ -514,7 +507,7 @@ static void __init of_ti_am3_no_gate_jtype_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd, 0); + of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd); } CLK_OF_DECLARE(ti_am3_no_gate_jtype_dpll_clock, "ti,am3-dpll-no-gate-j-type-clock", @@ -525,7 +518,6 @@ static void __init of_ti_am3_dpll_setup(struct device_node *node) const struct dpll_data dd = { .idlest_mask = 0x1, .enable_mask = 0x7, - .autoidle_mask = 0x7, .mult_mask = 0x7ff << 8, .div1_mask = 0x7f, .max_multiplier = 2047, @@ -534,7 +526,7 @@ static void __init of_ti_am3_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_ck_ops, &dd, 0); + of_ti_dpll_setup(node, &dpll_ck_ops, &dd); } CLK_OF_DECLARE(ti_am3_dpll_clock, "ti,am3-dpll-clock", of_ti_am3_dpll_setup); @@ -543,7 +535,6 @@ static void __init of_ti_am3_core_dpll_setup(struct device_node *node) const struct dpll_data dd = { .idlest_mask = 0x1, .enable_mask = 0x7, - .autoidle_mask = 0x7, .mult_mask = 0x7ff << 8, .div1_mask = 0x7f, .max_multiplier = 2047, @@ -552,7 +543,7 @@ static void __init of_ti_am3_core_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd, 0); + of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd); } CLK_OF_DECLARE(ti_am3_core_dpll_clock, "ti,am3-dpll-core-clock", of_ti_am3_core_dpll_setup); -- cgit v1.2.3 From aa76fcf473f6bfa839f37f77b6fdb71f0fb88d8f Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 21 Feb 2014 17:36:21 +0200 Subject: CLK: TI: DPLL: add support for omap2 core dpll OMAP2 has slightly different DPLL compared to later OMAP generations. This patch adds support for the ti,omap2-dpll-core-clock and also adds the bindings documentation. Signed-off-by: Tero Kristo --- .../devicetree/bindings/clock/ti/dpll.txt | 9 +++ arch/arm/mach-omap2/clock.h | 1 - arch/arm/mach-omap2/clock2xxx.h | 4 -- drivers/clk/ti/dpll.c | 78 +++++++++++++++++++--- include/linux/clk/ti.h | 6 ++ 5 files changed, 82 insertions(+), 16 deletions(-) (limited to 'drivers/clk/ti') diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt index 30bfdb7c9f18..50a1a427608f 100644 --- a/Documentation/devicetree/bindings/clock/ti/dpll.txt +++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt @@ -30,6 +30,7 @@ Required properties: "ti,am3-dpll-clock", "ti,am3-dpll-core-clock", "ti,am3-dpll-x2-clock", + "ti,omap2-dpll-core-clock", - #clock-cells : from common clock binding; shall be set to 0. - clocks : link phandles of parent clocks, first entry lists reference clock @@ -41,6 +42,7 @@ Required properties: "mult-div1" - contains the multiplier / divider register base address "autoidle" - contains the autoidle register base address (optional) ti,am3-* dpll types do not have autoidle register + ti,omap2-* dpll type does not support idlest / autoidle registers Optional properties: - DPLL mode setting - defining any one or more of the following overrides @@ -73,3 +75,10 @@ Examples: clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x90>, <0x5c>, <0x68>; }; + + dpll_ck: dpll_ck { + #clock-cells = <0>; + compatible = "ti,omap2-dpll-core-clock"; + clocks = <&sys_ck>, <&sys_ck>; + reg = <0x0500>, <0x0540>; + }; diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index bda767a9dea8..f6e9904d7a75 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -279,7 +279,6 @@ extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait; extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait; extern const struct clk_hw_omap_ops clkhwops_apll54; extern const struct clk_hw_omap_ops clkhwops_apll96; -extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait; /* clksel_rate blocks shared between OMAP44xx and AM33xx */ diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h index 539dc08afbba..45f41a411603 100644 --- a/arch/arm/mach-omap2/clock2xxx.h +++ b/arch/arm/mach-omap2/clock2xxx.h @@ -21,10 +21,6 @@ unsigned long omap2xxx_sys_clk_recalc(struct clk_hw *clk, unsigned long parent_rate); unsigned long omap2_osc_clk_recalc(struct clk_hw *clk, unsigned long parent_rate); -unsigned long omap2_dpllcore_recalc(struct clk_hw *hw, - unsigned long parent_rate); -int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate, - unsigned long parent_rate); void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw); unsigned long omap2_clk_apll54_recalc(struct clk_hw *hw, unsigned long parent_rate); diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index dda262db42ea..34e233990212 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -35,21 +35,18 @@ static const struct clk_ops dpll_m4xen_ck_ops = { .set_rate = &omap3_noncore_dpll_set_rate, .get_parent = &omap2_init_dpll_parent, }; +#else +static const struct clk_ops dpll_m4xen_ck_ops = {}; #endif +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) || \ + defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) || \ + defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) static const struct clk_ops dpll_core_ck_ops = { .recalc_rate = &omap3_dpll_recalc, .get_parent = &omap2_init_dpll_parent, }; -#ifdef CONFIG_ARCH_OMAP3 -static const struct clk_ops omap3_dpll_core_ck_ops = { - .get_parent = &omap2_init_dpll_parent, - .recalc_rate = &omap3_dpll_recalc, - .round_rate = &omap2_dpll_round_rate, -}; -#endif - static const struct clk_ops dpll_ck_ops = { .enable = &omap3_noncore_dpll_enable, .disable = &omap3_noncore_dpll_disable, @@ -65,6 +62,33 @@ static const struct clk_ops dpll_no_gate_ck_ops = { .round_rate = &omap2_dpll_round_rate, .set_rate = &omap3_noncore_dpll_set_rate, }; +#else +static const struct clk_ops dpll_core_ck_ops = {}; +static const struct clk_ops dpll_ck_ops = {}; +static const struct clk_ops dpll_no_gate_ck_ops = {}; +const struct clk_hw_omap_ops clkhwops_omap3_dpll = {}; +#endif + +#ifdef CONFIG_ARCH_OMAP2 +static const struct clk_ops omap2_dpll_core_ck_ops = { + .get_parent = &omap2_init_dpll_parent, + .recalc_rate = &omap2_dpllcore_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap2_reprogram_dpllcore, +}; +#else +static const struct clk_ops omap2_dpll_core_ck_ops = {}; +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static const struct clk_ops omap3_dpll_core_ck_ops = { + .get_parent = &omap2_init_dpll_parent, + .recalc_rate = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, +}; +#else +static const struct clk_ops omap3_dpll_core_ck_ops = {}; +#endif #ifdef CONFIG_ARCH_OMAP3 static const struct clk_ops omap3_dpll_ck_ops = { @@ -237,10 +261,27 @@ static void __init of_ti_dpll_setup(struct device_node *node, init->parent_names = parent_names; dd->control_reg = ti_clk_get_reg_addr(node, 0); - dd->idlest_reg = ti_clk_get_reg_addr(node, 1); - dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2); - if (!dd->control_reg || !dd->idlest_reg || !dd->mult_div1_reg) + /* + * Special case for OMAP2 DPLL, register order is different due to + * missing idlest_reg, also clkhwops is different. Detected from + * missing idlest_mask. + */ + if (!dd->idlest_mask) { + dd->mult_div1_reg = ti_clk_get_reg_addr(node, 1); +#ifdef CONFIG_ARCH_OMAP2 + clk_hw->ops = &clkhwops_omap2xxx_dpll; + omap2xxx_clkt_dpllcore_init(&clk_hw->hw); +#endif + } else { + dd->idlest_reg = ti_clk_get_reg_addr(node, 1); + if (!dd->idlest_reg) + goto cleanup; + + dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2); + } + + if (!dd->control_reg || !dd->mult_div1_reg) goto cleanup; if (dd->autoidle_mask) { @@ -547,3 +588,18 @@ static void __init of_ti_am3_core_dpll_setup(struct device_node *node) } CLK_OF_DECLARE(ti_am3_core_dpll_clock, "ti,am3-dpll-core-clock", of_ti_am3_core_dpll_setup); + +static void __init of_ti_omap2_core_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .enable_mask = 0x3, + .mult_mask = 0x3ff << 12, + .div1_mask = 0xf << 8, + .max_divider = 16, + .min_divider = 1, + }; + + of_ti_dpll_setup(node, &omap2_dpll_core_ck_ops, &dd); +} +CLK_OF_DECLARE(ti_omap2_core_dpll_clock, "ti,omap2-dpll-core-clock", + of_ti_omap2_core_dpll_setup); diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 4a21a872dbbd..753878c6fa52 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -259,6 +259,11 @@ int omap2_dflt_clk_enable(struct clk_hw *hw); void omap2_dflt_clk_disable(struct clk_hw *hw); int omap2_dflt_clk_is_enabled(struct clk_hw *hw); void omap3_clk_lock_dpll5(void); +unsigned long omap2_dpllcore_recalc(struct clk_hw *hw, + unsigned long parent_rate); +int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate, + unsigned long parent_rate); +void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw); void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index); void ti_dt_clocks_register(struct ti_dt_clk *oclks); @@ -287,6 +292,7 @@ static inline void of_ti_clk_allow_autoidle_all(void) { } static inline void of_ti_clk_deny_autoidle_all(void) { } #endif +extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; extern const struct clk_hw_omap_ops clkhwops_wait; -- cgit v1.2.3 From 4d008589e271e28eae728eef7f5fb1f658f12b9f Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 24 Feb 2014 16:06:34 +0200 Subject: CLK: TI: APLL: add support for omap2 aplls This patch adds support for omap2 type aplls, which have gating and autoidle functionality. Signed-off-by: Tero Kristo --- .../devicetree/bindings/clock/ti/apll.txt | 24 ++- arch/arm/mach-omap2/clock.h | 11 -- drivers/clk/ti/apll.c | 181 +++++++++++++++++++++ include/linux/clk/ti.h | 21 ++- 4 files changed, 220 insertions(+), 17 deletions(-) (limited to 'drivers/clk/ti') diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt index 7faf5a68b3be..ade4dd4c30f0 100644 --- a/Documentation/devicetree/bindings/clock/ti/apll.txt +++ b/Documentation/devicetree/bindings/clock/ti/apll.txt @@ -14,18 +14,32 @@ a subtype of a DPLL [2], although a simplified one at that. [2] Documentation/devicetree/bindings/clock/ti/dpll.txt Required properties: -- compatible : shall be "ti,dra7-apll-clock" +- compatible : shall be "ti,dra7-apll-clock" or "ti,omap2-apll-clock" - #clock-cells : from common clock binding; shall be set to 0. - clocks : link phandles of parent clocks (clk-ref and clk-bypass) - reg : address and length of the register set for controlling the APLL. It contains the information of registers in the following order: - "control" - contains the control register base address - "idlest" - contains the idlest register base address + "control" - contains the control register offset + "idlest" - contains the idlest register offset + "autoidle" - contains the autoidle register offset (OMAP2 only) +- ti,clock-frequency : static clock frequency for the clock (OMAP2 only) +- ti,idlest-shift : bit-shift for the idlest field (OMAP2 only) +- ti,bit-shift : bit-shift for enable and autoidle fields (OMAP2 only) Examples: - apll_pcie_ck: apll_pcie_ck@4a008200 { + apll_pcie_ck: apll_pcie_ck { #clock-cells = <0>; clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>; - reg = <0x4a00821c 0x4>, <0x4a008220 0x4>; + reg = <0x021c>, <0x0220>; compatible = "ti,dra7-apll-clock"; }; + + apll96_ck: apll96_ck { + #clock-cells = <0>; + compatible = "ti,omap2-apll-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <2>; + ti,idlest-shift = <8>; + ti,clock-frequency = <96000000>; + reg = <0x0500>, <0x0530>, <0x0520>; + }; diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index f6e9904d7a75..eb441d137843 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -178,17 +178,6 @@ struct clksel { const struct clksel_rate *rates; }; -struct clk_hw_omap_ops { - void (*find_idlest)(struct clk_hw_omap *oclk, - void __iomem **idlest_reg, - u8 *idlest_bit, u8 *idlest_val); - void (*find_companion)(struct clk_hw_omap *oclk, - void __iomem **other_reg, - u8 *other_bit); - void (*allow_idle)(struct clk_hw_omap *oclk); - void (*deny_idle)(struct clk_hw_omap *oclk); -}; - unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw, unsigned long parent_rate); diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c index b986f61f5a77..5428c9c547cd 100644 --- a/drivers/clk/ti/apll.c +++ b/drivers/clk/ti/apll.c @@ -221,3 +221,184 @@ cleanup: kfree(init); } CLK_OF_DECLARE(dra7_apll_clock, "ti,dra7-apll-clock", of_dra7_apll_setup); + +#define OMAP2_EN_APLL_LOCKED 0x3 +#define OMAP2_EN_APLL_STOPPED 0x0 + +static int omap2_apll_is_enabled(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *ad = clk->dpll_data; + u32 v; + + v = ti_clk_ll_ops->clk_readl(ad->control_reg); + v &= ad->enable_mask; + + v >>= __ffs(ad->enable_mask); + + return v == OMAP2_EN_APLL_LOCKED ? 1 : 0; +} + +static unsigned long omap2_apll_recalc(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + + if (omap2_apll_is_enabled(hw)) + return clk->fixed_rate; + + return 0; +} + +static int omap2_apll_enable(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *ad = clk->dpll_data; + u32 v; + int i = 0; + + v = ti_clk_ll_ops->clk_readl(ad->control_reg); + v &= ~ad->enable_mask; + v |= OMAP2_EN_APLL_LOCKED << __ffs(ad->enable_mask); + ti_clk_ll_ops->clk_writel(v, ad->control_reg); + + while (1) { + v = ti_clk_ll_ops->clk_readl(ad->idlest_reg); + if (v & ad->idlest_mask) + break; + if (i > MAX_APLL_WAIT_TRIES) + break; + i++; + udelay(1); + } + + if (i == MAX_APLL_WAIT_TRIES) { + pr_warn("%s failed to transition to locked\n", + __clk_get_name(clk->hw.clk)); + return -EBUSY; + } + + return 0; +} + +static void omap2_apll_disable(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *ad = clk->dpll_data; + u32 v; + + v = ti_clk_ll_ops->clk_readl(ad->control_reg); + v &= ~ad->enable_mask; + v |= OMAP2_EN_APLL_STOPPED << __ffs(ad->enable_mask); + ti_clk_ll_ops->clk_writel(v, ad->control_reg); +} + +static struct clk_ops omap2_apll_ops = { + .enable = &omap2_apll_enable, + .disable = &omap2_apll_disable, + .is_enabled = &omap2_apll_is_enabled, + .recalc_rate = &omap2_apll_recalc, +}; + +static void omap2_apll_set_autoidle(struct clk_hw_omap *clk, u32 val) +{ + struct dpll_data *ad = clk->dpll_data; + u32 v; + + v = ti_clk_ll_ops->clk_readl(ad->autoidle_reg); + v &= ~ad->autoidle_mask; + v |= val << __ffs(ad->autoidle_mask); + ti_clk_ll_ops->clk_writel(v, ad->control_reg); +} + +#define OMAP2_APLL_AUTOIDLE_LOW_POWER_STOP 0x3 +#define OMAP2_APLL_AUTOIDLE_DISABLE 0x0 + +static void omap2_apll_allow_idle(struct clk_hw_omap *clk) +{ + omap2_apll_set_autoidle(clk, OMAP2_APLL_AUTOIDLE_LOW_POWER_STOP); +} + +static void omap2_apll_deny_idle(struct clk_hw_omap *clk) +{ + omap2_apll_set_autoidle(clk, OMAP2_APLL_AUTOIDLE_DISABLE); +} + +static struct clk_hw_omap_ops omap2_apll_hwops = { + .allow_idle = &omap2_apll_allow_idle, + .deny_idle = &omap2_apll_deny_idle, +}; + +static void __init of_omap2_apll_setup(struct device_node *node) +{ + struct dpll_data *ad = NULL; + struct clk_hw_omap *clk_hw = NULL; + struct clk_init_data *init = NULL; + struct clk *clk; + const char *parent_name; + u32 val; + + ad = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + init = kzalloc(sizeof(*init), GFP_KERNEL); + + if (!ad || !clk_hw || !init) + goto cleanup; + + clk_hw->dpll_data = ad; + clk_hw->hw.init = init; + init->ops = &omap2_apll_ops; + init->name = node->name; + clk_hw->ops = &omap2_apll_hwops; + + init->num_parents = of_clk_get_parent_count(node); + if (init->num_parents != 1) { + pr_err("%s must have one parent\n", node->name); + goto cleanup; + } + + parent_name = of_clk_get_parent_name(node, 0); + init->parent_names = &parent_name; + + if (of_property_read_u32(node, "ti,clock-frequency", &val)) { + pr_err("%s missing clock-frequency\n", node->name); + goto cleanup; + } + clk_hw->fixed_rate = val; + + if (of_property_read_u32(node, "ti,bit-shift", &val)) { + pr_err("%s missing bit-shift\n", node->name); + goto cleanup; + } + + clk_hw->enable_bit = val; + ad->enable_mask = 0x3 << val; + ad->autoidle_mask = 0x3 << val; + + if (of_property_read_u32(node, "ti,idlest-shift", &val)) { + pr_err("%s missing idlest-shift\n", node->name); + goto cleanup; + } + + ad->idlest_mask = 1 << val; + + ad->control_reg = ti_clk_get_reg_addr(node, 0); + ad->autoidle_reg = ti_clk_get_reg_addr(node, 1); + ad->idlest_reg = ti_clk_get_reg_addr(node, 2); + + if (!ad->control_reg || !ad->autoidle_reg || !ad->idlest_reg) + goto cleanup; + + clk = clk_register(NULL, &clk_hw->hw); + if (!IS_ERR(clk)) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + kfree(init); + return; + } +cleanup: + kfree(ad); + kfree(clk_hw); + kfree(init); +} +CLK_OF_DECLARE(omap2_apll_clock, "ti,omap2-apll-clock", + of_omap2_apll_setup); diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 753878c6fa52..44bf84002a34 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -94,7 +94,26 @@ struct dpll_data { u8 flags; }; -struct clk_hw_omap_ops; +struct clk_hw_omap; + +/** + * struct clk_hw_omap_ops - OMAP clk ops + * @find_idlest: find idlest register information for a clock + * @find_companion: find companion clock register information for a clock, + * basically converts CM_ICLKEN* <-> CM_FCLKEN* + * @allow_idle: enables autoidle hardware functionality for a clock + * @deny_idle: prevent autoidle hardware functionality for a clock + */ +struct clk_hw_omap_ops { + void (*find_idlest)(struct clk_hw_omap *oclk, + void __iomem **idlest_reg, + u8 *idlest_bit, u8 *idlest_val); + void (*find_companion)(struct clk_hw_omap *oclk, + void __iomem **other_reg, + u8 *other_bit); + void (*allow_idle)(struct clk_hw_omap *oclk); + void (*deny_idle)(struct clk_hw_omap *oclk); +}; /** * struct clk_hw_omap - OMAP struct clk -- cgit v1.2.3 From de742570745e12b53c70130ace958f2a60044000 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 25 Feb 2014 19:16:07 +0200 Subject: CLK: TI: interface: add support for omap2430 specific interface clock OMAP2430 I2CHS modules require specific hardware ops to be used, so added a new compatible string for this. Signed-off-by: Tero Kristo --- Documentation/devicetree/bindings/clock/ti/interface.txt | 2 ++ arch/arm/mach-omap2/clock.h | 1 - drivers/clk/ti/interface.c | 11 +++++++++++ include/linux/clk/ti.h | 1 + 4 files changed, 14 insertions(+), 1 deletion(-) (limited to 'drivers/clk/ti') diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt index 064e8caccac3..3111a409fea6 100644 --- a/Documentation/devicetree/bindings/clock/ti/interface.txt +++ b/Documentation/devicetree/bindings/clock/ti/interface.txt @@ -21,6 +21,8 @@ Required properties: "ti,omap3-dss-interface-clock" - interface clock with DSS specific HW handling "ti,omap3-ssi-interface-clock" - interface clock with SSI specific HW handling "ti,am35xx-interface-clock" - interface clock with AM35xx specific HW handling + "ti,omap2430-interface-clock" - interface clock with OMAP2430 specific HW + handling - #clock-cells : from common clock binding; shall be set to 0 - clocks : link to phandle of parent clock - reg : base address for the control register diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index eb441d137843..12f54d428d7c 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -268,7 +268,6 @@ extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait; extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait; extern const struct clk_hw_omap_ops clkhwops_apll54; extern const struct clk_hw_omap_ops clkhwops_apll96; -extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait; /* clksel_rate blocks shared between OMAP44xx and AM33xx */ extern const struct clksel_rate div_1_0_rates[]; diff --git a/drivers/clk/ti/interface.c b/drivers/clk/ti/interface.c index 320a2b168bb2..9c3e8c4aaa40 100644 --- a/drivers/clk/ti/interface.c +++ b/drivers/clk/ti/interface.c @@ -94,6 +94,7 @@ static void __init of_ti_no_wait_interface_clk_setup(struct device_node *node) CLK_OF_DECLARE(ti_no_wait_interface_clk, "ti,omap3-no-wait-interface-clock", of_ti_no_wait_interface_clk_setup); +#ifdef CONFIG_ARCH_OMAP3 static void __init of_ti_hsotgusb_interface_clk_setup(struct device_node *node) { _of_ti_interface_clk_setup(node, @@ -123,3 +124,13 @@ static void __init of_ti_am35xx_interface_clk_setup(struct device_node *node) } CLK_OF_DECLARE(ti_am35xx_interface_clk, "ti,am35xx-interface-clock", of_ti_am35xx_interface_clk_setup); +#endif + +#ifdef CONFIG_SOC_OMAP2430 +static void __init of_ti_omap2430_interface_clk_setup(struct device_node *node) +{ + _of_ti_interface_clk_setup(node, &clkhwops_omap2430_i2chs_wait); +} +CLK_OF_DECLARE(ti_omap2430_interface_clk, "ti,omap2430-interface-clock", + of_ti_omap2430_interface_clk_setup); +#endif diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 44bf84002a34..a8390d478528 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -312,6 +312,7 @@ static inline void of_ti_clk_deny_autoidle_all(void) { } #endif extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; +extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait; extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; extern const struct clk_hw_omap_ops clkhwops_wait; -- cgit v1.2.3 From be67c3bf382c591d8267e0ef12d80041854731d9 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 24 Feb 2014 17:52:57 +0200 Subject: CLK: TI: OMAP2: add clock init support Adds support for registering the alias clocks, boot time clock-enable list and disabling autoidle of clocks. Signed-off-by: Tero Kristo --- drivers/clk/ti/Makefile | 1 + drivers/clk/ti/clk-2xxx.c | 254 ++++++++++++++++++++++++++++++++++++++++++++++ include/linux/clk/ti.h | 2 + 3 files changed, 257 insertions(+) create mode 100644 drivers/clk/ti/clk-2xxx.c (limited to 'drivers/clk/ti') diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index 4319d4031aa3..4afeaed9e9ba 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -3,6 +3,7 @@ obj-y += clk.o autoidle.o clockdomain.o clk-common = dpll.o composite.o divider.o gate.o \ fixed-factor.o mux.o apll.o obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o +obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o obj-$(CONFIG_ARCH_OMAP3) += $(clk-common) interface.o clk-3xxx.o obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o diff --git a/drivers/clk/ti/clk-2xxx.c b/drivers/clk/ti/clk-2xxx.c new file mode 100644 index 000000000000..f6400fb5ee3e --- /dev/null +++ b/drivers/clk/ti/clk-2xxx.c @@ -0,0 +1,254 @@ +/* + * OMAP2 Clock init + * + * Copyright (C) 2013 Texas Instruments, Inc + * Tero Kristo (t-kristo@ti.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include + +static struct ti_dt_clk omap2xxx_clks[] = { + DT_CLK(NULL, "func_32k_ck", "func_32k_ck"), + DT_CLK(NULL, "secure_32k_ck", "secure_32k_ck"), + DT_CLK(NULL, "virt_12m_ck", "virt_12m_ck"), + DT_CLK(NULL, "virt_13m_ck", "virt_13m_ck"), + DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"), + DT_CLK(NULL, "virt_26m_ck", "virt_26m_ck"), + DT_CLK(NULL, "aplls_clkin_ck", "aplls_clkin_ck"), + DT_CLK(NULL, "aplls_clkin_x2_ck", "aplls_clkin_x2_ck"), + DT_CLK(NULL, "osc_ck", "osc_ck"), + DT_CLK(NULL, "sys_ck", "sys_ck"), + DT_CLK(NULL, "alt_ck", "alt_ck"), + DT_CLK(NULL, "mcbsp_clks", "mcbsp_clks"), + DT_CLK(NULL, "dpll_ck", "dpll_ck"), + DT_CLK(NULL, "apll96_ck", "apll96_ck"), + DT_CLK(NULL, "apll54_ck", "apll54_ck"), + DT_CLK(NULL, "func_54m_ck", "func_54m_ck"), + DT_CLK(NULL, "core_ck", "core_ck"), + DT_CLK(NULL, "func_96m_ck", "func_96m_ck"), + DT_CLK(NULL, "func_48m_ck", "func_48m_ck"), + DT_CLK(NULL, "func_12m_ck", "func_12m_ck"), + DT_CLK(NULL, "sys_clkout_src", "sys_clkout_src"), + DT_CLK(NULL, "sys_clkout", "sys_clkout"), + DT_CLK(NULL, "emul_ck", "emul_ck"), + DT_CLK(NULL, "mpu_ck", "mpu_ck"), + DT_CLK(NULL, "dsp_fck", "dsp_fck"), + DT_CLK(NULL, "gfx_3d_fck", "gfx_3d_fck"), + DT_CLK(NULL, "gfx_2d_fck", "gfx_2d_fck"), + DT_CLK(NULL, "gfx_ick", "gfx_ick"), + DT_CLK("omapdss_dss", "ick", "dss_ick"), + DT_CLK(NULL, "dss_ick", "dss_ick"), + DT_CLK(NULL, "dss1_fck", "dss1_fck"), + DT_CLK(NULL, "dss2_fck", "dss2_fck"), + DT_CLK(NULL, "dss_54m_fck", "dss_54m_fck"), + DT_CLK(NULL, "core_l3_ck", "core_l3_ck"), + DT_CLK(NULL, "ssi_fck", "ssi_ssr_sst_fck"), + DT_CLK(NULL, "usb_l4_ick", "usb_l4_ick"), + DT_CLK(NULL, "l4_ck", "l4_ck"), + DT_CLK(NULL, "ssi_l4_ick", "ssi_l4_ick"), + DT_CLK(NULL, "gpt1_ick", "gpt1_ick"), + DT_CLK(NULL, "gpt1_fck", "gpt1_fck"), + DT_CLK(NULL, "gpt2_ick", "gpt2_ick"), + DT_CLK(NULL, "gpt2_fck", "gpt2_fck"), + DT_CLK(NULL, "gpt3_ick", "gpt3_ick"), + DT_CLK(NULL, "gpt3_fck", "gpt3_fck"), + DT_CLK(NULL, "gpt4_ick", "gpt4_ick"), + DT_CLK(NULL, "gpt4_fck", "gpt4_fck"), + DT_CLK(NULL, "gpt5_ick", "gpt5_ick"), + DT_CLK(NULL, "gpt5_fck", "gpt5_fck"), + DT_CLK(NULL, "gpt6_ick", "gpt6_ick"), + DT_CLK(NULL, "gpt6_fck", "gpt6_fck"), + DT_CLK(NULL, "gpt7_ick", "gpt7_ick"), + DT_CLK(NULL, "gpt7_fck", "gpt7_fck"), + DT_CLK(NULL, "gpt8_ick", "gpt8_ick"), + DT_CLK(NULL, "gpt8_fck", "gpt8_fck"), + DT_CLK(NULL, "gpt9_ick", "gpt9_ick"), + DT_CLK(NULL, "gpt9_fck", "gpt9_fck"), + DT_CLK(NULL, "gpt10_ick", "gpt10_ick"), + DT_CLK(NULL, "gpt10_fck", "gpt10_fck"), + DT_CLK(NULL, "gpt11_ick", "gpt11_ick"), + DT_CLK(NULL, "gpt11_fck", "gpt11_fck"), + DT_CLK(NULL, "gpt12_ick", "gpt12_ick"), + DT_CLK(NULL, "gpt12_fck", "gpt12_fck"), + DT_CLK("omap-mcbsp.1", "ick", "mcbsp1_ick"), + DT_CLK(NULL, "mcbsp1_ick", "mcbsp1_ick"), + DT_CLK(NULL, "mcbsp1_fck", "mcbsp1_fck"), + DT_CLK("omap-mcbsp.2", "ick", "mcbsp2_ick"), + DT_CLK(NULL, "mcbsp2_ick", "mcbsp2_ick"), + DT_CLK(NULL, "mcbsp2_fck", "mcbsp2_fck"), + DT_CLK("omap2_mcspi.1", "ick", "mcspi1_ick"), + DT_CLK(NULL, "mcspi1_ick", "mcspi1_ick"), + DT_CLK(NULL, "mcspi1_fck", "mcspi1_fck"), + DT_CLK("omap2_mcspi.2", "ick", "mcspi2_ick"), + DT_CLK(NULL, "mcspi2_ick", "mcspi2_ick"), + DT_CLK(NULL, "mcspi2_fck", "mcspi2_fck"), + DT_CLK(NULL, "uart1_ick", "uart1_ick"), + DT_CLK(NULL, "uart1_fck", "uart1_fck"), + DT_CLK(NULL, "uart2_ick", "uart2_ick"), + DT_CLK(NULL, "uart2_fck", "uart2_fck"), + DT_CLK(NULL, "uart3_ick", "uart3_ick"), + DT_CLK(NULL, "uart3_fck", "uart3_fck"), + DT_CLK(NULL, "gpios_ick", "gpios_ick"), + DT_CLK(NULL, "gpios_fck", "gpios_fck"), + DT_CLK("omap_wdt", "ick", "mpu_wdt_ick"), + DT_CLK(NULL, "mpu_wdt_ick", "mpu_wdt_ick"), + DT_CLK(NULL, "mpu_wdt_fck", "mpu_wdt_fck"), + DT_CLK(NULL, "sync_32k_ick", "sync_32k_ick"), + DT_CLK(NULL, "wdt1_ick", "wdt1_ick"), + DT_CLK(NULL, "omapctrl_ick", "omapctrl_ick"), + DT_CLK("omap24xxcam", "fck", "cam_fck"), + DT_CLK(NULL, "cam_fck", "cam_fck"), + DT_CLK("omap24xxcam", "ick", "cam_ick"), + DT_CLK(NULL, "cam_ick", "cam_ick"), + DT_CLK(NULL, "mailboxes_ick", "mailboxes_ick"), + DT_CLK(NULL, "wdt4_ick", "wdt4_ick"), + DT_CLK(NULL, "wdt4_fck", "wdt4_fck"), + DT_CLK(NULL, "mspro_ick", "mspro_ick"), + DT_CLK(NULL, "mspro_fck", "mspro_fck"), + DT_CLK(NULL, "fac_ick", "fac_ick"), + DT_CLK(NULL, "fac_fck", "fac_fck"), + DT_CLK("omap_hdq.0", "ick", "hdq_ick"), + DT_CLK(NULL, "hdq_ick", "hdq_ick"), + DT_CLK("omap_hdq.0", "fck", "hdq_fck"), + DT_CLK(NULL, "hdq_fck", "hdq_fck"), + DT_CLK("omap_i2c.1", "ick", "i2c1_ick"), + DT_CLK(NULL, "i2c1_ick", "i2c1_ick"), + DT_CLK("omap_i2c.2", "ick", "i2c2_ick"), + DT_CLK(NULL, "i2c2_ick", "i2c2_ick"), + DT_CLK(NULL, "gpmc_fck", "gpmc_fck"), + DT_CLK(NULL, "sdma_fck", "sdma_fck"), + DT_CLK(NULL, "sdma_ick", "sdma_ick"), + DT_CLK(NULL, "sdrc_ick", "sdrc_ick"), + DT_CLK(NULL, "des_ick", "des_ick"), + DT_CLK("omap-sham", "ick", "sha_ick"), + DT_CLK(NULL, "sha_ick", "sha_ick"), + DT_CLK("omap_rng", "ick", "rng_ick"), + DT_CLK(NULL, "rng_ick", "rng_ick"), + DT_CLK("omap-aes", "ick", "aes_ick"), + DT_CLK(NULL, "aes_ick", "aes_ick"), + DT_CLK(NULL, "pka_ick", "pka_ick"), + DT_CLK(NULL, "usb_fck", "usb_fck"), + DT_CLK(NULL, "timer_32k_ck", "func_32k_ck"), + DT_CLK(NULL, "timer_sys_ck", "sys_ck"), + DT_CLK(NULL, "timer_ext_ck", "alt_ck"), + { .node_name = NULL }, +}; + +static struct ti_dt_clk omap2420_clks[] = { + DT_CLK(NULL, "sys_clkout2_src", "sys_clkout2_src"), + DT_CLK(NULL, "sys_clkout2", "sys_clkout2"), + DT_CLK(NULL, "dsp_ick", "dsp_ick"), + DT_CLK(NULL, "iva1_ifck", "iva1_ifck"), + DT_CLK(NULL, "iva1_mpu_int_ifck", "iva1_mpu_int_ifck"), + DT_CLK(NULL, "wdt3_ick", "wdt3_ick"), + DT_CLK(NULL, "wdt3_fck", "wdt3_fck"), + DT_CLK("mmci-omap.0", "ick", "mmc_ick"), + DT_CLK(NULL, "mmc_ick", "mmc_ick"), + DT_CLK("mmci-omap.0", "fck", "mmc_fck"), + DT_CLK(NULL, "mmc_fck", "mmc_fck"), + DT_CLK(NULL, "eac_ick", "eac_ick"), + DT_CLK(NULL, "eac_fck", "eac_fck"), + DT_CLK(NULL, "i2c1_fck", "i2c1_fck"), + DT_CLK(NULL, "i2c2_fck", "i2c2_fck"), + DT_CLK(NULL, "vlynq_ick", "vlynq_ick"), + DT_CLK(NULL, "vlynq_fck", "vlynq_fck"), + DT_CLK("musb-hdrc", "fck", "osc_ck"), + { .node_name = NULL }, +}; + +static struct ti_dt_clk omap2430_clks[] = { + DT_CLK("twl", "fck", "osc_ck"), + DT_CLK(NULL, "iva2_1_ick", "iva2_1_ick"), + DT_CLK(NULL, "mdm_ick", "mdm_ick"), + DT_CLK(NULL, "mdm_osc_ck", "mdm_osc_ck"), + DT_CLK("omap-mcbsp.3", "ick", "mcbsp3_ick"), + DT_CLK(NULL, "mcbsp3_ick", "mcbsp3_ick"), + DT_CLK(NULL, "mcbsp3_fck", "mcbsp3_fck"), + DT_CLK("omap-mcbsp.4", "ick", "mcbsp4_ick"), + DT_CLK(NULL, "mcbsp4_ick", "mcbsp4_ick"), + DT_CLK(NULL, "mcbsp4_fck", "mcbsp4_fck"), + DT_CLK("omap-mcbsp.5", "ick", "mcbsp5_ick"), + DT_CLK(NULL, "mcbsp5_ick", "mcbsp5_ick"), + DT_CLK(NULL, "mcbsp5_fck", "mcbsp5_fck"), + DT_CLK("omap2_mcspi.3", "ick", "mcspi3_ick"), + DT_CLK(NULL, "mcspi3_ick", "mcspi3_ick"), + DT_CLK(NULL, "mcspi3_fck", "mcspi3_fck"), + DT_CLK(NULL, "icr_ick", "icr_ick"), + DT_CLK(NULL, "i2chs1_fck", "i2chs1_fck"), + DT_CLK(NULL, "i2chs2_fck", "i2chs2_fck"), + DT_CLK("musb-omap2430", "ick", "usbhs_ick"), + DT_CLK(NULL, "usbhs_ick", "usbhs_ick"), + DT_CLK("omap_hsmmc.0", "ick", "mmchs1_ick"), + DT_CLK(NULL, "mmchs1_ick", "mmchs1_ick"), + DT_CLK(NULL, "mmchs1_fck", "mmchs1_fck"), + DT_CLK("omap_hsmmc.1", "ick", "mmchs2_ick"), + DT_CLK(NULL, "mmchs2_ick", "mmchs2_ick"), + DT_CLK(NULL, "mmchs2_fck", "mmchs2_fck"), + DT_CLK(NULL, "gpio5_ick", "gpio5_ick"), + DT_CLK(NULL, "gpio5_fck", "gpio5_fck"), + DT_CLK(NULL, "mdm_intc_ick", "mdm_intc_ick"), + DT_CLK("omap_hsmmc.0", "mmchsdb_fck", "mmchsdb1_fck"), + DT_CLK(NULL, "mmchsdb1_fck", "mmchsdb1_fck"), + DT_CLK("omap_hsmmc.1", "mmchsdb_fck", "mmchsdb2_fck"), + DT_CLK(NULL, "mmchsdb2_fck", "mmchsdb2_fck"), + { .node_name = NULL }, +}; + +static const char *enable_init_clks[] = { + "apll96_ck", + "apll54_ck", + "sync_32k_ick", + "omapctrl_ick", + "gpmc_fck", + "sdrc_ick", +}; + +enum { + OMAP2_SOC_OMAP2420, + OMAP2_SOC_OMAP2430, +}; + +static int __init omap2xxx_dt_clk_init(int soc_type) +{ + ti_dt_clocks_register(omap2xxx_clks); + + if (soc_type == OMAP2_SOC_OMAP2420) + ti_dt_clocks_register(omap2420_clks); + else + ti_dt_clocks_register(omap2430_clks); + + omap2_clk_disable_autoidle_all(); + + omap2_clk_enable_init_clocks(enable_init_clks, + ARRAY_SIZE(enable_init_clks)); + + pr_info("Clocking rate (Crystal/DPLL/MPU): %ld.%01ld/%ld/%ld MHz\n", + (clk_get_rate(clk_get_sys(NULL, "sys_ck")) / 1000000), + (clk_get_rate(clk_get_sys(NULL, "sys_ck")) / 100000) % 10, + (clk_get_rate(clk_get_sys(NULL, "dpll_ck")) / 1000000), + (clk_get_rate(clk_get_sys(NULL, "mpu_ck")) / 1000000)); + + return 0; +} + +int __init omap2420_dt_clk_init(void) +{ + return omap2xxx_dt_clk_init(OMAP2_SOC_OMAP2420); +} + +int __init omap2430_dt_clk_init(void) +{ + return omap2xxx_dt_clk_init(OMAP2_SOC_OMAP2430); +} diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index a8390d478528..188f0cbb26c2 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -302,6 +302,8 @@ int omap5xxx_dt_clk_init(void); int dra7xx_dt_clk_init(void); int am33xx_dt_clk_init(void); int am43xx_dt_clk_init(void); +int omap2420_dt_clk_init(void); +int omap2430_dt_clk_init(void); #ifdef CONFIG_OF void of_ti_clk_allow_autoidle_all(void); -- cgit v1.2.3 From 61f25ca76ccc7b63371a7a6b0b8b9a8a46745b79 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 24 Feb 2014 18:49:35 +0200 Subject: ARM: OMAP2: clock: add DT boot support for cpufreq_ck The clock and clkdev for this are added manually. Signed-off-by: Tero Kristo --- arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 53 ++++++++++++++++++++++++++++ drivers/clk/ti/clk-2xxx.c | 2 ++ include/linux/clk/ti.h | 1 + 3 files changed, 56 insertions(+) (limited to 'drivers/clk/ti') diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index b935ed2922d8..85e0b0c06718 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -208,3 +208,56 @@ void omap2xxx_clkt_vps_late_init(void) clk_put(c); } } + +#ifdef CONFIG_OF +#include +#include + +static const struct clk_ops virt_prcm_set_ops = { + .recalc_rate = &omap2_table_mpu_recalc, + .set_rate = &omap2_select_table_rate, + .round_rate = &omap2_round_to_table_rate, +}; + +/** + * omap2xxx_clkt_vps_init - initialize virt_prcm_set clock + * + * Does a manual init for the virtual prcm DVFS clock for OMAP2. This + * function is called only from omap2 DT clock init, as the virtual + * node is not modelled in the DT clock data. + */ +void omap2xxx_clkt_vps_init(void) +{ + struct clk_init_data init = { NULL }; + struct clk_hw_omap *hw = NULL; + struct clk *clk; + const char *parent_name = "mpu_ck"; + struct clk_lookup *lookup = NULL; + + omap2xxx_clkt_vps_late_init(); + omap2xxx_clkt_vps_check_bootloader_rates(); + + hw = kzalloc(sizeof(*hw), GFP_KERNEL); + lookup = kzalloc(sizeof(*lookup), GFP_KERNEL); + if (!hw || !lookup) + goto cleanup; + init.name = "virt_prcm_set"; + init.ops = &virt_prcm_set_ops; + init.parent_names = &parent_name; + init.num_parents = 1; + + hw->hw.init = &init; + + clk = clk_register(NULL, &hw->hw); + + lookup->dev_id = NULL; + lookup->con_id = "cpufreq_ck"; + lookup->clk = clk; + + clkdev_add(lookup); + return; +cleanup: + kfree(hw); + kfree(lookup); +} +#endif diff --git a/drivers/clk/ti/clk-2xxx.c b/drivers/clk/ti/clk-2xxx.c index f6400fb5ee3e..c808ab3d2bb2 100644 --- a/drivers/clk/ti/clk-2xxx.c +++ b/drivers/clk/ti/clk-2xxx.c @@ -229,6 +229,8 @@ static int __init omap2xxx_dt_clk_init(int soc_type) else ti_dt_clocks_register(omap2430_clks); + omap2xxx_clkt_vps_init(); + omap2_clk_disable_autoidle_all(); omap2_clk_enable_init_clocks(enable_init_clks, diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 188f0cbb26c2..4231c41bed51 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -283,6 +283,7 @@ unsigned long omap2_dpllcore_recalc(struct clk_hw *hw, int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate, unsigned long parent_rate); void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw); +void omap2xxx_clkt_vps_init(void); void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index); void ti_dt_clocks_register(struct ti_dt_clk *oclks); -- cgit v1.2.3 From b3654d703de2ddf5651d2fa959879d586e685376 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Wed, 5 Mar 2014 10:03:38 +0200 Subject: CLK: TI: gate: add composite interface clock to OMAP2 only build Composite interface clock is needed by OMAP2, but it was only built in for OMAP3. Fixed the conditional build flag checks for this. Signed-off-by: Tero Kristo --- drivers/clk/ti/gate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/clk/ti') diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c index 3e2999d11d15..474c171d352c 100644 --- a/drivers/clk/ti/gate.c +++ b/drivers/clk/ti/gate.c @@ -185,7 +185,7 @@ of_ti_composite_no_wait_gate_clk_setup(struct device_node *node) CLK_OF_DECLARE(ti_composite_no_wait_gate_clk, "ti,composite-no-wait-gate-clock", of_ti_composite_no_wait_gate_clk_setup); -#ifdef CONFIG_ARCH_OMAP3 +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) static void __init of_ti_composite_interface_clk_setup(struct device_node *node) { _of_ti_composite_gate_clk_setup(node, &clkhwops_iclk_wait); -- cgit v1.2.3 From 0cccd9190009aa6c037aa88a85f2a1b72a6a7963 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 7 May 2014 13:20:45 +0300 Subject: ARM: dts: dra7xx-clocks: Correct name for atl clkin3 clock To allign the name with the other atl clock names: atlclkin3_ck -> atl_clkin3_ck Signed-off-by: Peter Ujfalusi Signed-off-by: Tero Kristo --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 22 +++++++++++----------- drivers/clk/ti/clk-7xx.c | 2 +- 2 files changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers/clk/ti') diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index cfb8fc753f50..30160348934c 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -26,7 +26,7 @@ clock-frequency = <0>; }; - atlclkin3_ck: atlclkin3_ck { + atl_clkin3_ck: atl_clkin3_ck { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; @@ -730,7 +730,7 @@ mcasp1_ahclkr_mux: mcasp1_ahclkr_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <28>; reg = <0x0550>; }; @@ -738,7 +738,7 @@ mcasp1_ahclkx_mux: mcasp1_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x0550>; }; @@ -1631,7 +1631,7 @@ mcasp2_ahclkr_mux: mcasp2_ahclkr_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <28>; reg = <0x1860>; }; @@ -1639,7 +1639,7 @@ mcasp2_ahclkx_mux: mcasp2_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1860>; }; @@ -1655,7 +1655,7 @@ mcasp3_ahclkx_mux: mcasp3_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1868>; }; @@ -1671,7 +1671,7 @@ mcasp4_ahclkx_mux: mcasp4_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1898>; }; @@ -1687,7 +1687,7 @@ mcasp5_ahclkx_mux: mcasp5_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1878>; }; @@ -1703,7 +1703,7 @@ mcasp6_ahclkx_mux: mcasp6_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1904>; }; @@ -1719,7 +1719,7 @@ mcasp7_ahclkx_mux: mcasp7_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1908>; }; @@ -1735,7 +1735,7 @@ mcasp8_ahclk_mux: mcasp8_ahclk_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <22>; reg = <0x1890>; }; diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c index f7e40734c819..e1581335937d 100644 --- a/drivers/clk/ti/clk-7xx.c +++ b/drivers/clk/ti/clk-7xx.c @@ -24,7 +24,7 @@ static struct ti_dt_clk dra7xx_clks[] = { DT_CLK(NULL, "atl_clkin0_ck", "atl_clkin0_ck"), DT_CLK(NULL, "atl_clkin1_ck", "atl_clkin1_ck"), DT_CLK(NULL, "atl_clkin2_ck", "atl_clkin2_ck"), - DT_CLK(NULL, "atlclkin3_ck", "atlclkin3_ck"), + DT_CLK(NULL, "atl_clkin3_ck", "atl_clkin3_ck"), DT_CLK(NULL, "hdmi_clkin_ck", "hdmi_clkin_ck"), DT_CLK(NULL, "mlb_clkin_ck", "mlb_clkin_ck"), DT_CLK(NULL, "mlbp_clkin_ck", "mlbp_clkin_ck"), -- cgit v1.2.3 From 9ac33b0ce81fa48dd39e7ddfc1bf4519052181dd Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 7 May 2014 13:20:47 +0300 Subject: CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic) Audio Tracking Logic is designed to be used by HD Radio applications to synchronize the audio output clocks to the baseband clock. ATL can be also used to track errors between two reference clocks (BWS, AWS) and generate a modulated clock output which averages to some desired frequency. In essence ATL is generating a clock to be used by an audio codec and also to be used by the SoC as MCLK. To be able to integrate the ATL provided clocks to the clock tree we need two types of DT binding: - DT clock nodes to represent the ATL clocks towards the CCF - binding for the ATL IP itself which is going to handle the hw configuration The reason for this type of setup is that ATL itself is a separate device in the SoC, it has it's own address space and clock domain. Other IPs can use the ATL generated clock as their functional clock (McASPs for example) and external components like audio codecs can also use the very same clock as their MCLK. The ATL IP in DRA7 contains 4 ATL instences. Signed-off-by: Peter Ujfalusi Signed-off-by: Tero Kristo --- drivers/clk/ti/Makefile | 3 +- drivers/clk/ti/clk-dra7-atl.c | 312 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 314 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/ti/clk-dra7-atl.c (limited to 'drivers/clk/ti') diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index 4afeaed9e9ba..ed4d0aaf8916 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o obj-$(CONFIG_ARCH_OMAP3) += $(clk-common) interface.o clk-3xxx.o obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o -obj-$(CONFIG_SOC_DRA7XX) += $(clk-common) clk-7xx.o +obj-$(CONFIG_SOC_DRA7XX) += $(clk-common) clk-7xx.o \ + clk-dra7-atl.o obj-$(CONFIG_SOC_AM43XX) += $(clk-common) clk-43xx.o endif diff --git a/drivers/clk/ti/clk-dra7-atl.c b/drivers/clk/ti/clk-dra7-atl.c new file mode 100644 index 000000000000..4a65b410e4d5 --- /dev/null +++ b/drivers/clk/ti/clk-dra7-atl.c @@ -0,0 +1,312 @@ +/* + * DRA7 ATL (Audio Tracking Logic) clock driver + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Peter Ujfalusi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRA7_ATL_INSTANCES 4 + +#define DRA7_ATL_PPMR_REG(id) (0x200 + (id * 0x80)) +#define DRA7_ATL_BBSR_REG(id) (0x204 + (id * 0x80)) +#define DRA7_ATL_ATLCR_REG(id) (0x208 + (id * 0x80)) +#define DRA7_ATL_SWEN_REG(id) (0x210 + (id * 0x80)) +#define DRA7_ATL_BWSMUX_REG(id) (0x214 + (id * 0x80)) +#define DRA7_ATL_AWSMUX_REG(id) (0x218 + (id * 0x80)) +#define DRA7_ATL_PCLKMUX_REG(id) (0x21c + (id * 0x80)) + +#define DRA7_ATL_SWEN BIT(0) +#define DRA7_ATL_DIVIDER_MASK (0x1f) +#define DRA7_ATL_PCLKMUX BIT(0) +struct dra7_atl_clock_info; + +struct dra7_atl_desc { + struct clk *clk; + struct clk_hw hw; + struct dra7_atl_clock_info *cinfo; + int id; + + bool probed; /* the driver for the IP has been loaded */ + bool valid; /* configured */ + bool enabled; + u32 bws; /* Baseband Word Select Mux */ + u32 aws; /* Audio Word Select Mux */ + u32 divider; /* Cached divider value */ +}; + +struct dra7_atl_clock_info { + struct device *dev; + void __iomem *iobase; + + struct dra7_atl_desc *cdesc; +}; + +#define to_atl_desc(_hw) container_of(_hw, struct dra7_atl_desc, hw) + +static inline void atl_write(struct dra7_atl_clock_info *cinfo, u32 reg, + u32 val) +{ + __raw_writel(val, cinfo->iobase + reg); +} + +static inline int atl_read(struct dra7_atl_clock_info *cinfo, u32 reg) +{ + return __raw_readl(cinfo->iobase + reg); +} + +static int atl_clk_enable(struct clk_hw *hw) +{ + struct dra7_atl_desc *cdesc = to_atl_desc(hw); + + if (!cdesc->probed) + goto out; + + if (unlikely(!cdesc->valid)) + dev_warn(cdesc->cinfo->dev, "atl%d has not been configured\n", + cdesc->id); + pm_runtime_get_sync(cdesc->cinfo->dev); + + atl_write(cdesc->cinfo, DRA7_ATL_ATLCR_REG(cdesc->id), + cdesc->divider - 1); + atl_write(cdesc->cinfo, DRA7_ATL_SWEN_REG(cdesc->id), DRA7_ATL_SWEN); + +out: + cdesc->enabled = true; + + return 0; +} + +static void atl_clk_disable(struct clk_hw *hw) +{ + struct dra7_atl_desc *cdesc = to_atl_desc(hw); + + if (!cdesc->probed) + goto out; + + atl_write(cdesc->cinfo, DRA7_ATL_SWEN_REG(cdesc->id), 0); + pm_runtime_put_sync(cdesc->cinfo->dev); + +out: + cdesc->enabled = false; +} + +static int atl_clk_is_enabled(struct clk_hw *hw) +{ + struct dra7_atl_desc *cdesc = to_atl_desc(hw); + + return cdesc->enabled; +} + +static unsigned long atl_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct dra7_atl_desc *cdesc = to_atl_desc(hw); + + return parent_rate / cdesc->divider; +} + +static long atl_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + unsigned divider; + + divider = (*parent_rate + rate / 2) / rate; + if (divider > DRA7_ATL_DIVIDER_MASK + 1) + divider = DRA7_ATL_DIVIDER_MASK + 1; + + return *parent_rate / divider; +} + +static int atl_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct dra7_atl_desc *cdesc = to_atl_desc(hw); + u32 divider; + + divider = ((parent_rate + rate / 2) / rate) - 1; + if (divider > DRA7_ATL_DIVIDER_MASK) + divider = DRA7_ATL_DIVIDER_MASK; + + cdesc->divider = divider + 1; + + return 0; +} + +const struct clk_ops atl_clk_ops = { + .enable = atl_clk_enable, + .disable = atl_clk_disable, + .is_enabled = atl_clk_is_enabled, + .recalc_rate = atl_clk_recalc_rate, + .round_rate = atl_clk_round_rate, + .set_rate = atl_clk_set_rate, +}; + +static void __init of_dra7_atl_clock_setup(struct device_node *node) +{ + struct dra7_atl_desc *clk_hw = NULL; + struct clk_init_data init = { 0 }; + const char **parent_names = NULL; + struct clk *clk; + + clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + if (!clk_hw) { + pr_err("%s: could not allocate dra7_atl_desc\n", __func__); + return; + } + + clk_hw->hw.init = &init; + clk_hw->divider = 1; + init.name = node->name; + init.ops = &atl_clk_ops; + init.flags = CLK_IGNORE_UNUSED; + init.num_parents = of_clk_get_parent_count(node); + + if (init.num_parents != 1) { + pr_err("%s: atl clock %s must have 1 parent\n", __func__, + node->name); + goto cleanup; + } + + parent_names = kzalloc(sizeof(char *), GFP_KERNEL); + + if (!parent_names) + goto cleanup; + + parent_names[0] = of_clk_get_parent_name(node, 0); + + init.parent_names = parent_names; + + clk = clk_register(NULL, &clk_hw->hw); + + if (!IS_ERR(clk)) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + return; + } +cleanup: + kfree(parent_names); + kfree(clk_hw); +} +CLK_OF_DECLARE(dra7_atl_clock, "ti,dra7-atl-clock", of_dra7_atl_clock_setup); + +static int of_dra7_atl_clk_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct dra7_atl_clock_info *cinfo; + int i; + int ret = 0; + + if (!node) + return -ENODEV; + + cinfo = devm_kzalloc(&pdev->dev, sizeof(*cinfo), GFP_KERNEL); + if (!cinfo) + return -ENOMEM; + + cinfo->iobase = of_iomap(node, 0); + cinfo->dev = &pdev->dev; + pm_runtime_enable(cinfo->dev); + + pm_runtime_get_sync(cinfo->dev); + atl_write(cinfo, DRA7_ATL_PCLKMUX_REG(0), DRA7_ATL_PCLKMUX); + + for (i = 0; i < DRA7_ATL_INSTANCES; i++) { + struct device_node *cfg_node; + char prop[5]; + struct dra7_atl_desc *cdesc; + struct of_phandle_args clkspec; + struct clk *clk; + int rc; + + rc = of_parse_phandle_with_args(node, "ti,provided-clocks", + NULL, i, &clkspec); + + if (rc) { + pr_err("%s: failed to lookup atl clock %d\n", __func__, + i); + return -EINVAL; + } + + clk = of_clk_get_from_provider(&clkspec); + + cdesc = to_atl_desc(__clk_get_hw(clk)); + cdesc->cinfo = cinfo; + cdesc->id = i; + + /* Get configuration for the ATL instances */ + snprintf(prop, sizeof(prop), "atl%u", i); + cfg_node = of_find_node_by_name(node, prop); + if (cfg_node) { + ret = of_property_read_u32(cfg_node, "bws", + &cdesc->bws); + ret |= of_property_read_u32(cfg_node, "aws", + &cdesc->aws); + if (!ret) { + cdesc->valid = true; + atl_write(cinfo, DRA7_ATL_BWSMUX_REG(i), + cdesc->bws); + atl_write(cinfo, DRA7_ATL_AWSMUX_REG(i), + cdesc->aws); + } + } + + cdesc->probed = true; + /* + * Enable the clock if it has been asked prior to loading the + * hw driver + */ + if (cdesc->enabled) + atl_clk_enable(__clk_get_hw(clk)); + } + pm_runtime_put_sync(cinfo->dev); + + return ret; +} + +static int of_dra7_atl_clk_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static struct of_device_id of_dra7_atl_clk_match_tbl[] = { + { .compatible = "ti,dra7-atl", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_dra7_atl_clk_match_tbl); + +static struct platform_driver dra7_atl_clk_driver = { + .driver = { + .name = "dra7-atl", + .owner = THIS_MODULE, + .of_match_table = of_dra7_atl_clk_match_tbl, + }, + .probe = of_dra7_atl_clk_probe, + .remove = of_dra7_atl_clk_remove, +}; + +module_platform_driver(dra7_atl_clk_driver); + +MODULE_DESCRIPTION("Clock driver for DRA7 Audio Tracking Logic"); +MODULE_ALIAS("platform:dra7-atl-clock"); +MODULE_AUTHOR("Peter Ujfalusi "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 81c7e03acbcb68274be770134f8f04f270ffa859 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 30 Apr 2014 14:39:37 +0300 Subject: CLK: TI: clk-54xx: Set the rate for dpll_abe_m2x2_ck In order to get correct clock dividers for AESS/ABE we need to set the dpll_abe_m2x2_ck rate to be double of dpll_abe_ck. Signed-off-by: Peter Ujfalusi Signed-off-by: Tero Kristo --- drivers/clk/ti/clk-54xx.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/clk/ti') diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c index 08f3d1b915b3..5e183993e3ec 100644 --- a/drivers/clk/ti/clk-54xx.c +++ b/drivers/clk/ti/clk-54xx.c @@ -240,6 +240,12 @@ int __init omap5xxx_dt_clk_init(void) if (rc) pr_err("%s: failed to configure ABE DPLL!\n", __func__); + abe_dpll = clk_get_sys(NULL, "dpll_abe_m2x2_ck"); + if (!rc) + rc = clk_set_rate(abe_dpll, OMAP5_DPLL_ABE_DEFFREQ * 2); + if (rc) + pr_err("%s: failed to configure ABE m2x2 DPLL!\n", __func__); + usb_dpll = clk_get_sys(NULL, "dpll_usb_ck"); rc = clk_set_rate(usb_dpll, OMAP5_DPLL_USB_DEFFREQ); if (rc) -- cgit v1.2.3 From b4be018921879ba7452379af8fb7320833a12bd4 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 16 May 2014 05:45:59 -0500 Subject: CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies MPU DPLL on OMAP5, DRA75x, DRA72x has a limitation on the maximum frequency it can be locked at. Duty Cycle Correction circuit is used to recover a correct duty cycle for achieving higher frequencies (hardware internally switches output to M3 output(CLKOUTHIF) from M2 output (CLKOUT)). So provide support to setup required data to handle Duty cycle by the setting up the minimum frequency for DPLL. 1.4GHz is common for all these devices and is based on Technical Reference Manual information for OMAP5432((SWPU282U) chapter 3.6.3.3.1 "DPLLs Output Clocks Parameters", and equivalent information from DRA75x, DRA72x documentation(SPRUHP2E, SPRUHI2P). Signed-off-by: Nishanth Menon [t-kristo@ti.com: updated for latest dpll init API call] Signed-off-by: Tero Kristo --- Documentation/devicetree/bindings/clock/ti/dpll.txt | 1 + drivers/clk/ti/dpll.c | 21 +++++++++++++++++++++ 2 files changed, 22 insertions(+) (limited to 'drivers/clk/ti') diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt index 50a1a427608f..df57009ff8e7 100644 --- a/Documentation/devicetree/bindings/clock/ti/dpll.txt +++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt @@ -24,6 +24,7 @@ Required properties: "ti,omap4-dpll-core-clock", "ti,omap4-dpll-m4xen-clock", "ti,omap4-dpll-j-type-clock", + "ti,omap5-mpu-dpll-clock", "ti,am3-dpll-no-gate-clock", "ti,am3-dpll-j-type-clock", "ti,am3-dpll-no-gate-j-type-clock", diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index 34e233990212..abd956d5f838 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -433,6 +433,27 @@ static void __init of_ti_omap4_dpll_setup(struct device_node *node) CLK_OF_DECLARE(ti_omap4_dpll_clock, "ti,omap4-dpll-clock", of_ti_omap4_dpll_setup); +static void __init of_ti_omap5_mpu_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .dcc_mask = BIT(22), + .dcc_rate = 1400000000, /* DCC beyond 1.4GHz */ + .min_divider = 1, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_ck_ops, &dd); +} +CLK_OF_DECLARE(of_ti_omap5_mpu_dpll_clock, "ti,omap5-mpu-dpll-clock", + of_ti_omap5_mpu_dpll_setup); + static void __init of_ti_omap4_core_dpll_setup(struct device_node *node) { const struct dpll_data dd = { -- cgit v1.2.3