From 3539699c03a6a349ffb8a2ac83ec40d6a981b2d6 Mon Sep 17 00:00:00 2001 From: Phil Reid Date: Tue, 15 Mar 2016 15:46:30 +0800 Subject: gpio: mcp23s08: Fix clearing of interrupt. The mcp23s18 is configurable on clearing the interrupt on either reading INTCAP or GPIO. Since driver reads INTCAP in IRQ and not the GPIO reg need to set control byte for this mode. Signed-off-by: Phil Reid Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mcp23s08.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/gpio') diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c index 971915830d7f..47e486910aab 100644 --- a/drivers/gpio/gpio-mcp23s08.c +++ b/drivers/gpio/gpio-mcp23s08.c @@ -49,6 +49,7 @@ # define IOCON_HAEN (1 << 3) # define IOCON_ODR (1 << 2) # define IOCON_INTPOL (1 << 1) +# define IOCON_INTCC (1) #define MCP_GPPU 0x06 #define MCP_INTF 0x07 #define MCP_INTCAP 0x08 @@ -680,6 +681,9 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, if (mirror) status |= IOCON_MIRROR | (IOCON_MIRROR << 8); + if (type == MCP_TYPE_S18) + status |= IOCON_INTCC | (IOCON_INTCC << 8); + status = mcp->ops->write(mcp, MCP_IOCON, status); if (status < 0) goto fail; -- cgit v1.2.3